Embed Size (px)
DESCRIPTION
Reloj de tiempo muerto
Citation preview
1
Marek Piatkowski – FSP Consulting
Visual ManagementVisual Management
Down Time ClockDown Time Clock
Marek Piatkowski
December 2010
2
Marek Piatkowski – FSP Consulting
3
Marek Piatkowski – FSP Consulting
What is a Down Time Clock?What is a Down Time Clock?
Down Time Clock is used to measure total duration of machine stops
– regardless of the reasons or causes
In it’s simplest form it is an analog clock connected to the “logic” of a
machine or an automated process
At the start of the shift the clock is reset to 12:00
When machine is operating – the clock is not running. When the
machine stops – the clock starts to run.
This way at the end of a work period (for example a shift) you can have
an accurate read-out how many minutes the machine was not running.
In this example the machine was not running for almost 2 hours and
50 minutes – 170 minutes down time per shift
How accurate is your down time? You might surprise yourself.
4
Marek Piatkowski – FSP Consulting
5
Marek Piatkowski – FSP Consulting
6
Marek Piatkowski – FSP Consulting
7
Marek Piatkowski – FSP Consulting
8
Marek Piatkowski – FSP Consulting
Lean Transformation SolutionsLean Transformation Solutions
Marek PiatkowskiMarek Piatkowski
F.S.PF.S.P. Consulting Inc.. Consulting Inc.
VM: 416VM: 416--235235--26312631
Cell: 248Cell: 248--207207--04160416
[email protected]@rogers.com
www.TWIwww.TWI--Network.comNetwork.com
