Upload
killerjackass
View
225
Download
0
Embed Size (px)
Citation preview
8/13/2019 Dokumen TA
1/2
http://digilib.its.ac.id
SUMMARY
PERANCANGAN DAN PEMBUATAN ALAT PENGUKUR TEMPERATUR
PERMUKAAN FLUIDA BERBASIS MIKROKONTROLER DENGAN SISTEM
PENGIRIMAN DATA VIA WIFI
DESIGN AND IMPLEMENTATION OF FLUID SURFACE TEMPERATURE MEASURING DEVICE BASED ON
MICROCONTROLLER WITH WIFI DATA TRANSFERRING SYSTEM
Created by Wati, Ika Istiana
Subject : Measuring instruments
Subject Alt : Microcontrollers
Keyword : : receiver;LM35;transciever;transmitter;telemetri;Wi-Fi
Description :Telah dibuat prototipe telemetri berbasis mikrokontroler dengan
pengiriman data melalui WiFi untuk mendeteksi dan merekam suhu permukaan
fluida seperti air laut, sungai atau cairan dalam pipa-pipa atau tandon pada
industri tertentu. Metode pengambilan data dilakukan secara time series atau
kontinue terhadap waktu. Sensor yang digunakan adalah LM35 dan telah diuji
coba pada range 270C 1000C dengan total error instrumen sebesar 1,38%.
Selanjutnya informasi yang diperoleh dari sensor dikirim ke receiver
melalui komunikasi yang dilakukan secara wireless dengan gelombang RF pada
frekuensi 2,4 GHz. Sensor ini terhubung dengan mikrokontroler dan modul
transciever yang akan mengirimkan data melalui WiFi ke modul transciever lainyang terhubung dengan komputer sebagai receiver. Mikrokontroler disini
berfungsi sebagai interfacing pengolah data antara sensor dan kanal RS232.
Sedangkan komputer untuk monitoring dan penyimpan data. Dari hasil
penelitian, transmisi data dapat dilakukan secara wireless sampai jarak 150 meter.
Alat ini diusulkan dapat diterapkan dalam bidang oceanografi untuk sensing
temperatur muka laut sebagai deteksi dini terjadinya bencana, posisi ikan, dan
untuk aplikasi di bidang industri.
Description Alt:
The telemetry prototype that used for transferring and recording
temperature data of fluid surface was design and fabricated. Wireless
communication between two AVR microcontroller are tuned to work correctly at
2,4 GHz using transceiver modules. The transceiver modules can be powered by
5V power supply which is common for AVR microcontrollers without problem in
interfacing. Modules do not require addition components, just apply power and
connect data line to send information to/from and thats it.
The temperature sensor that used in this application is LM35, that is
precision integrated-circuit temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature. The wireless
communication can transfer the data temperature less than 100 0C for distances
150 meters.This prototype can be applied to detect the sea surface temperature, fish
position, and for other industrial application.
Page 1
8/13/2019 Dokumen TA
2/2
Contributor : Dr. Melania Suweni Muntini, M.T
Dr. Yono Hadi Pramono, M.Eng
Date Create : 04/12/2009
Type : Text
Format : pdf.
Language : Indonesian
Identifier : ITS-Master-3100009035178
Collection : 3100009035178
Call Number : RTFi 681.25 Wat p
Source : Master Theses, Departement of Physics, RTFi 681.25 Wat p, 2009
COverage : ITS Community only
Right : Copyright @2009 by ITS Library. This publication is protected by copyright and permissionshould be obtained from the ITS Library prior to any prohibited reproduction, storage in aretrievel system, or transmission in any form or by any means, electronic, mechanical,
photocopying, recording, or likewise. For information regarding permission(s), write to ITSLibrary
Full file - Member Only
If You want to view FullText...Please Register as MEMBER
Contact Person :
Administrator ([email protected])
Taufik Rachmanu ([email protected])
Dewi Eka Agustina ([email protected])
Ansi Aflacha Putri ([email protected])
Tondo Indra Nyata ([email protected])
Aprillia Tri Wulansari ([email protected])
Thank You,
Nur Hasan ( [email protected] )
Supervisor
Page 2