Upload
ngohuong
View
266
Download
1
Embed Size (px)
Citation preview
www.dmgmori.com
Universal milling machines for five-sided / five-axis machining
DMU / DMC duoBLOCK®
World premiere
4th Generation duoBLOCK®
DMU 80 P / FD duoBLOCK®
DMC 80 U / FD duoBLOCK®
DMU 100 P duoBLOCK®
DMC 100 U duoBLOCK®
DMU 125 P / FD duoBLOCK®
DMC 125 U / FD duoBLOCK®
DMU 160 P / FD duoBLOCK®
02
DMU / DMC P / U / FD duoBLOCK® series
The new benchmark in five-axis machining.
Applications and parts
Highlights
Control technology
Overview
Technical data
AutomotiveSteering knuckles for Infinity
Red Bull Racing Formula 1 cars
Five-axis machines in the highly stable duoBLOCK® design with 30 % more precision, performance and efficiency allow the highest machining performance and maximum precision with high dynamics. From hard-to-cut materials such as those found in the aerospace sector, to the highest requirements for surface quality such as in tool and mould making, the 4th generation duoBLOCK® machines provide optimal machining conditions.
03
Tool and mould makingTube mould
Energy technologyDrill head for the oil and gas drilling sector
AerospaceChassis components
Machine constructionMould carrier for PET bottles
30%
30%
30%
04
Applications and parts
Highlights
Control technology
Overview
Technical data
With the new duoBLOCK® series, every component becomes a masterpiece. Comprehensive cooling and the optimised stiffness of the new, redesigned duoBLOCK® concept are the basis for the highest possible levels of precision and machining performance.
The stiffness of the highly stable and precise duoBLOCK® concept has been improved by 30 %. The new, innovative wheel magazine provides unbeatable flexibility with up to 453 tools and minimal space requirements.
Please note: The resaults of machining and performance trials given in this catalogue are examples. The results may vary slightly due to the site conditions and cutting conditions.
4th Generation duoBLOCK® – added value for you
Unique!
m
or
e i
nn
ov
at
i ve
more precise
m o re e f f i c i e n t
s tronger
c
elo
s®
DMU / DMC P / U / FD duoBLOCK® series
Unique
Precision
+ 30 % greater precision
+ Full cooling of the axis drives with the precision package
+ Comprehensive cooling measures
+ Significantly improved temperature response
+ SGS: Spindle Growth Sensor
Performance
+ 30 % more overall stiffness
+ powerMASTER 1000 motor spindle rated at 1,000 Nm and 77 kW
+ 5X torqueMASTER® rated at 1,300 Nm and 37 kW
+ Table with 76 % greater stiffness
+ 50 mm diameter ball screw
+ 55 mm wide linear guides
30%
30%
30%
05
4th GenerationduoBLOCK®
Precision Performance Efficiency CELOS®
m
or
e i
nn
ov
at
i ve
more precise
m o re e f f i c i e n t
s tronger
c
elo
s®
Efficiency
+ 30 % lower energy consumption
+ Lower space requirements, extremely compact wheel magazine with short tool replenishment time
+ High machine availability
+ Optimal ease of maintenance and ideal ergonomics thanks to unrestricted accessibility
+ B-axis: improved interference contour, higher stiffness!
CELOS®
+ CELOS® from DMG MORI enables consistent administration, documentation and visual-isation of order, process and machine data
+ CELOS® can be extended with apps and is also compatible with your company’s existing infrastructures and programmes
06
Applications and parts
Highlights
ê Precision
Control technology
Overview
Technical data
DMU / DMC P / U / FD duoBLOCK® series
The masterpiece. Always precise!
The entire feed drive is cooled
Comprehensive cooling measures achieve the highest long-term accuracy and precision. With the precision package, the entire feed drive is cooled and the machine bed is tempered, resulting in up to 30 % higher component precision.
Standard cooling measures
Headstock
Motor spindle B-axis motor A-axis gears and motor B-axis planetary gearing
NC rotary table
C-axis motor C-axis gears
Basic construction
Y- / Z-axis motor X- / Y- / Z-feed axes: Ball screw, bearing X- / Y- / Z-linear guideways
Symmetrical column cooling with cooling bars on the column
Cooling profiles on the machine bed Carbon fibre-mounted Y measurement system Machine bed rinsing (KSS)
30%
07
Precision Performance Efficiency CELOS®
Precision package with coolant
temperature control(optional)
X- / Y- / Z-ball screw nut
X-axis motor** As standard with the DMU 160 P / FD
Cooling profiles in the X axis (3 ×)
Thermoshield
duoBLOCK® 4th generation
duoBLOCK® 3rd generation
Competition
30 % improved temperature stabilisation
thanks to more intensive cooling measures
76%
12% 20%
3
4
08
Applications and parts
Highlights
ê Stiffness / Performance
Control technology
Overview
Technical data
DMU / DMC P / U / FD duoBLOCK® series
The greatest stiffness for maximised machining performance!
Precision Performance Efficiency CELOS®
B-axisnc rotary taBle
Premium class!
machine structure
The overall stiffness of the highly stable and very precise duoBLOCK® concept has been improved by over 30 %. The structure of the basic design has been optimised further using FEM calculations and the components have been strengthened.
With the powerMASTER 1000 motor spindle, this results in maxi-mum stiffness and machining performance with 1,000 Nm of torque.
Increased structural
stiffness up to:
duoBLOCK® 4th generation
duoBLOCK® 3rd generation
Competition
130%
1
2
4
5
09
1 Optimised component structure
12 % higher stiffness thanks to an elevated column with a wider support
2 Size 50 ball screw in all axes
Large drive systems and internally cooled ball screws as standard
3 Size 55 linear guides in the Y-axis
Wide linear guides for a maximum table load of 4,500 kg
4 Larger YRT bearing in the B- and C-axis
Improved stiffness thanks to the larger bearing diameter
5 Optimised three-point support
100 mm wider supporting area
powerMASTER 1000
powerMASTER 1000
130 % increase in torque
duoBLOCK® 4th generation
duoBLOCK® 3rd generation
Competition
45 kW 100%
580 Nm 100%
54 kW 40%
77.5 kW 15%700 Nm 40%
1,000 Nm 15%80
50
40
15
1,000
700
600
100
Torque(Nm)
Spe
ed(r
pm)
Power(kW)
20 740
3,00
0
9,00
0
powerMASTER SK50 / HSK-A100* motor spindle
9,000 rpm / 77.5 ** kW / 1,000 ** Nm
* optional, ** 15 % DC (2 min)
0 K
WH
5
10
15
21
25 KW
H
30%
10
706
6.2
m2
3.7
m2
Applications and parts
Highlights
ê Efficiency
Control technology
Overview
Technical data
Precision Performance Efficiency CELOS®
The new duoBLOCK® series reduces energy consumption by up to 30 % thanks to its intelligent accumulators and, due to its maximised availability, provides the ideal conditions for efficient production. The new, most compact tool magazine on the market significantly reduces the footprint, and optimal accessibility offers the ultimate in ease of maintenance.
DMU / DMC P / U / FD duoBLOCK® series
Manufacture more efficiently!
Save energy with efficient features
energy s av ing
duoBLOCK® 4th generation
duoBLOCK® 3rd generation
* Energy required for the complete machining of a component on the duoBLOCK®
Ch
ip C
on
ve
yo
r
KSS
SyS
tem
Coolant unit main Spindle
miSCellaneouS
11
706
6.2
m2
3.7
m2
The duoBLOCK® has always been the benchmark for optimised accessibility and large working volumes that are open on three sides. The large doors allow quick and ergonomic set-up and adjustment. Additionally, unrestricted crane access from above to over the centre of the table promotes ease of loading and unloading.
DMU / DMC P / U / FD duoBLOCK® series
Obvious!
Compact magazineThe new wheel magazine is the most compact on the market, reducing the footprint by 41 % compared to its predecessors. Example: Magazine for 123 tools with SK50 tool holder
Simplicity of maintenanceWith its large viewing panels, the Fluidbox provides optimised accessibility for unrivalled ease of maintenance.
Old chain magazine* New wheel magazine*
* DMU 80 P duoBLOCK®
2.5 m2 saving
opt imal work in g a re a access iB i l i t y
41%
12
DMU / DMC P / U / FD duoBLOCK® series
Innovative down to the smallest detail!
The new, innovative wheel magazine provides the highest flexibility and productivity due to the fact that it can be replenished during machining or idle time and thanks to its compactness, with up to 41 % smaller footprint. With rapid tool call-up times down to 5.6 seconds, despite the 453 tools, the preselected tool can be exchanged into the spindle within 0.5 second, even during short machining processes.
duoBLOCK® 4th generation
duoBLOCK® 3rd generation
Competition
41 % smaller footprint
with the 123 station magazine
Highlights
+ Tool replenishment during machining and idle times (two wheels or more)
+ The most compact magazine on the market (41 % smaller machine width for the 123 pocket magazine)
+ Up to 453 tool pockets: call-up time of up to 5.6 seconds
+ Patented design
+ Extremely short tool change time of just 0.5 second (0.8 second with the HSK-A100)
+ Safe tool retention thanks to the toolholder
+ No disassembly required to accommo date up to 123 (SK50) or 183 (SK40) tools of size 80 and up to 63 tools of size 100 / 125
Applications and parts
Highlights
ê Innovation
Control technology
Overview
Technical data
–30°
+180°2
1
13
Precision Performance Efficiency CELOS®
DMU / DMC P / U / FD duoBLOCK® series
Powerful! 5X torqueMASTER®
80 % higher torque
1,300 Nm, 37 kW power, SK50 / HSK-A100 tool holder and up to 8,000 rpm
20%
B-axis with motor spindle5-axis universal milling head with gear-driven spindle. Significantly improved interference contour and higher stiffness!
duoBLOCK® 4th generation
duoBLOCK® 3rd generation
Competition
20 % more stiffness
1 20 % more stiffness thanks to the
large YRT bearing
a further improvement to the already highly stiff B-axis concept with a 45° swivel plane
2 Integrated cable carrier
improved interference contour, higher quality thanks to an upgraded sealed housing, longer life thanks to positively driven cables
14
Applications and parts
Highlights
ê CELOS®
Control technology
Overview
Technical data
Precision Performance Efficiency CELOS®
Simplified machine operation. Seamless integration of machine and company.
ERGOline® Control with 21.5" multi-touch-screen and SIEMENS.
Simple
User-friendly operation of all new high-tech machines from DMG MORI.
Consistent
Consistent administration, docu-mentation and visualisation of order, process and machine data.
Compatible
Compatible with PPS and ERP systems. Can be networked with CAD / CAM products. Open to trendsetting CELOS® APP extensions.
Like on a smartphone, the operator has direct access to all available applications through the APP MENU.
SMARTkey®
Customised user authorisa-tion. Individually adapted
access privileges to the control system and the machine.
15
CELOS® features a standardised user interface for all new high-tech machines from DMG MORI. CELOS® APPs facilitate the consistent management, documentation and visualisation of order, process and machine data on a unique 21.5" multi-touch monitor. They also simplify, standardise and automate the operation of the machine. 16 standard APPs help the machine operator prepare, optimise and systematically process production jobs.
CELOS® APPs – 3 examples:JOB MANAGERSystematic planning, administration and preparation of work orders.
+ Machine related creation and configuration of new work orders
+ Structured storage of all production related data and documents
+ Easy visualisation of orders, including NC program, equipment, etc.
JOB ASSISTANTProcess-defined orders.
+ Menu guided set-up of the machine and conversational processing of production orders
+ Reliable error prevention thanks to windows- based assistance instructions with a mandatory acknowledgement function
TOOL HANDLINGShorter tool replenishment times through assessments of the magazine configuration for subsequent orders.
+ Display of all tools required for a job, including the automatic generation of a loading list
+ Generation of an unloading list through the automatic detection of all tools not required for subsequent jobs
DMU / DMC P / U / FD duoBLOCK® series
– From the idea to the finished product.
16
3D quickSET®
Quick and easy for the highest precision
Toolkit for checking and correcting the kinematic precision of four- and five- axis machine configurations
All head variants and all table axes
Interpolation turning
Machining of faces and recesses without a turn-mill table
The machining process takes place in a circular movement around and inside the workpiece
The spindle is perpendicular to the direction of movement
L measuring sensor package
Enhanced measuring options with the L measuring sensor
Measurement of pockets and grooves
Measurement in hard-to-reach areas
Measurement of individual points
Package with manual and automatic calibration
Multi-tool
Save time by efficiently using tools
Several ”sister tools” on one tool holder
Save tool change times and magazine pockets
MPC – Machine Protection
Control
Protecting machines with an emergency shut-off function
Vibration sensors on the milling spindle
Emergency shut-off with teach function
Process monitoring by means of a bar graph
Milling spindle bearing diagnostics
Grinding
Machining with the highest surface precision
Grinding on a universal milling machine
For internal, external and face grinding
Truing cycles for truing the grinding wheel
SGS – Spindle Growth
Sensor
Improved precision by measuring spindle displacement
Measurement of the axial displacement of the rotor compared to the stator in real time
The CNC system compensates for the actual displacement
ATC – Application Tuning
Cycle
Process optimisation at the push of a button
Process-oriented feed drive tuning
Minimised machining time with maximised component quality, irrespective of workpiece weight
Exclusive, optionally available DMG MORI technology cycles
Applications and parts
Highlights
Control technology
ê Software and cycles
Overview
Technical data
STANDARD
17
DMU / DMC P / U / FD duoBLOCK® series
High-end CNCs for safe machining and maximum precision.
In addition to SIEMENS 840D solutionline, the new duoBLOCK® generation is equipped with the new ERGOline® control panel with a 21.5" monitor and CELOS®. The 19" ERGOline® panel is available for the HEIDENHAIN TNC 640. Optionally, various exclu-sive software cycles such as ATC, MPC, 3D quickSET® and DMG MORI Virtual Machine are available, which directly influence either workpiece quality or process optimisation.
Operate 4.5 on SIEMENS 840D solutionline
+ Highly simplified interactive programming with identical ”look and feel” for turning and milling
+ SINUMERIK Operate new user interface
+ ATC*, 3D quickSET®*
+ Powerful 32-bit multiprocessor system and controller, 1 GB RAM
+ Fast block processing time of approx. 0.6 ms
+ Look-ahead function for up to 150 NC blocks (capable of parameterisation)
+ Graphical simulation of the machining process with overhead view, triple-plane display and 3D display; synchronised display during the machining process
+ 3D machining, optional 3D tool correction via the surface normal vector
+ DECKEL MAHO Package MDynamics, optional optimisation of surface finish and speed for smoothing surface transitions
* optional
HEIDENHAIN TNC 640
+ Unique, highly detailed 3D simulation display
+ New optimised TNC user interface
+ HSCI – HEIDENHAIN Serial Controller Interface
+ Conversational or ISO programming
+ Rapid program generation with plain text programming
+ Graphical programming
+ Collision monitoring (DCM)
+ ATC*, 3D quickSET®*
+ Powerful dual-core processor (Intel i7-3)
+ New optimised ADP (Advanced Dynamic Prediction) movement guide for improved surfaces and quicker machining (block processing time of just 0.5 ms)
+ Dynamic look-ahead function with no path restrictions
+ Adaptive AFC feed controller as standard
+ Dynamic Efficiency with adaptive feed control AFC and trochoidal milling as standard (Active Chatter Control ACC optional)* optional
18
Applications and parts
Highlights
Control technology
Overview
Technical data
Highlights:
+ Precision: up to 30 % higher component precision with the fully cooled feed drive
+ Performance: up to 30 % higher stiffness for maximum cutting performance
+ Efficiency: up to 30 % lower energy consumption with intelligent accumulators
+ Highest flexibility and shortest machining times with the new B-axis with 20 % greater stiffness, swivel range of 210° and integrated cable carrier
+ Fast, innovative wheel magazine with tool change time of 0.5 second and up to 453 tools within a small footprint
+ Fast rotary pallet changer for off-line workpiece set-up as standard
+ Milling and turning in one set-up with DirectDrive table and rotary speed up to 800 rpm
DMU / DMC P / U / FD duoBLOCK® series
4th Generation duoBLOCK® – for 30 % more precision, performance and efficiency!
DMU 80 P duoBLOCK® DMU 100 P duoBLOCK® DMU 125 P duoBLOCK® DMU 160 P duoBLOCK®
Travels X / Y / Z mm 800 / 1,050 / 850 1,000 / 1,250 / 1,000 1,250 / 1,250 / 1,000 1,600 / 1,600 / 1,100
Table size mm ø 900 × 700 ø 1,100 × 900 ø 1,250 × 1,100 ø 1,600 x 1,250
Maximum table load kg 1,500 2,200 2,600 4,500
Workpiece measurements mm
1,60
0
1,100
1,60
0
1,250
1,67
5
1,600
1,45
0
950
19
DMC 80 U duoBLOCK® DMC 100 U duoBLOCK® DMC 125 U duoBLOCK®
Travels X / Y / Z mm 800 / 1,050 / 850 1,000 / 1,250 / 1,000 1,250 / 1,250 / 1,000
Table size mm ø 800 × 630 ø 1,000 × 800 ø 1,000 × 800
Maximum table load kg 1,400 2,000 2,000
Workpiece measurements mm
The duoBLOCK® series modular design with B-axis as standard equipment.
1,60
0
1,000
1,60
0
1,250
1,45
0
900
Wheel magazine
Tables Pallet changer
Machine bed and column
1 to 5 wheels, up to 453 tools (DMC)
Milling heads
5X torqueMASTER®
A-axis B-axis
NC Rotary table (DMU)
Milling / Turning table (DMU)
Turn-mill pallet table (DMC)
NC Pallet table (DMC)
Pallet changer (DMC)
20
DMU P / FD und DMC U / FD duoBLOCK® series
DMU FD and DMC FD duoBLOCK® – Maximum productivity through complete machining on one machine.
DMU 80 FD duoBLOCK®
DMC 80 FD duoBLOCK®
DMU 125 FD duoBLOCK®
DMC 125 FD duoBLOCK®
DMU 160 FD duoBLOCK®
Travels X / Y / Z mm 800 / 1,050 / 850 800 / 1,050 / 850 1,250 / 1,250 / 1,000 1,250 / 1,250 / 1,000 1,600 / 1,600 / 1,100
Table size mm ø 800 ø 800 × 630 ø 1,250 ø 1,100 ø 1,500
Maximum table load kg 1,300 1,200 2,600 2,000 4,000
Workpiece measurements mm
1,45
0
900
1,45
0
900
1,60
0
1,250
Applications and parts
Highlights
Control technology
Overview
Technical data
1,60
0
1,250
1,64
0
1,500
21
Milling / turning cycles for every requirement
+ Exclusive milling / turning cycles by DECKEL MAHO
+ Measuring cycles for the (L-) measuring probe: Calibrate measuring probe in the working area; measure undercuts, recesses, etc.*
+ Swivelling of long tools into the workpiece*
+ Alternating speed to dampen vibration during machining*
+ Use of multi-station tools (up to nine cutters)*
* optional
Standard milling / turning cycles
+ Recessing, undercutting, metal removal, threading, etc.
+ Milling and turning tool measurement
+ Imbalance determination, control and monitoring
+ Measurement data storage, distribution and transfer
Milling and mill-turning
Grinding + For internal, external and face grinding
Highlights
+ Calibration cycle: Calibration of dressing station
+ Dressing cycle: Dressing the grinding wheel
+ Surface grinding cycle: Grinding of flat surfaces on round, centrally clamped workpieces
+ Longitudinal grinding cycle: Grinding of cylindrical surfaces on centrally clamped workpieces
Grinding package measures
+ Linear guideways and ball screws with additional wipers
+ Sealing air for all linear scales
+ Reduction of lubrication intervals
+ Observance of additional maintenance instructions
+ Dressing station
+ Centrifugal filter
+ Sensors for dressing, tool measurement and in-process probing
22
DMU / DMC P / U / FD duoBLOCK® series
Example applications
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Example applications
ê Technology integration
Knuckle – dimensions (unfinished part): 270 × 210 × 320 mm Machining time: 24 hours, clamping operations: 3
Sector Motor sport Spindle 18,000 rpm
Number of tools 77 Power 35 kW
Material Aluminium alloy Torque 130 Nm
Machining focus: Surfaces from 0.4 Ra up to 0.6 Ra, precise position and size tolerance, contains 3 + 2 axis machining and full five-axis simultaneous machining
Chassis component – dimensions: 1,080 × 610 × 210 mm Machining time: 23 hours, clamping operations: 3
Sector Aerospace Gear-driven spindle 6,300 rpm
Number of tools 21 Power 32 kW
Material Titanium 10-2-3 Torque 1,100 Nm
Machining focus: Reducing the machining time by 43 %, 5 µm positioning accuracy, high effectiveness of the heavy-duty machining package, very high surface finish of Ra 0.4 µm
Tube mould – dimensions: 680 × 470 × 335 mm Machining time: 4 hours 56 min., clamping operations: 2
Sector Mould making Spindle 12,000 rpm
Number of tools 6 Power 52 kW
Material Aluminium / C45 Torque 430 Nm
Machining focus: High surface finish of up to Ra 0.35, 3 + 2 axis and five-axis simultaneous machining, two components on the machine
Mould for manufacturing PET bottles – dimensions: 400 × 360 × 400 mmMachining time: 86 min., clamping operations: 3
Sector Mould making Spindle 12,000 rpm
Number of tools 62 Power 52 kW
Material GGG60 Torque 430 Nm
Machining focus: Complete machining including in-process automatic contour measurement and fully automatic serial production by means of a pallet system (FMS) including workpiece loading by robot
Drilling head – dimensions: 330 × 40 × 400 mmMachining time: 18 hours, clamping operations: 1
Sector Oil / gas drilling sector Spindle 12,000 rpm
Number of tools 20 Power 44 kW
Material 21CrNiMo2 (1.6523) Torque 288 Nm
Machining focus: Reducing machining time by 75 % from 70 hours to 18 hours, machining negative angles with the angle head, surface quality of Ra 1 µm, complete machining in one clamping
23
17 years of turn-mill technology with over 1,000 machines sold
+ Complete machining, including milling and turning at up to 800 rpm, on one machine in a single clamping with Direct Drive technology
+ The strongest turn-mill table in its class, rated at up to 5,400 Nm
+ Lower unit production costs with the highest precision thanks to faster machining; lower handling costs due to reduced idle times and fewer process steps
+ Exclusive DMG MORI turn-mill cycles
+ Less time needed and higher precision thanks to easy set-up
+ Less investment and lower space requirements with the use of just one machine
+ Oil mist filter and shatterproof safety glass panels as standard
+ Integral tool measurement
+ Heavy workpieces up to 4,000 kg and maximum workpiece diameter of 1,500 mm
+ Electronic balancing
Maximum productivity thanks to complete machining with
the duoBLOCK® FD series
1 2 3 4 5 6 7 8 9 10
Complete machining process:1 machine4 process steps300 % higher productivity
Conventional machining process:3 machines10 process steps
MillingTurningDrillingTapping
Set-upReposition
MillingTurningDrillingTapping
Unclamp
Machine 1
TurningSet-up
RepositionTurning Set-up
MillingDrillingTapping
Set-upReposition
MillingDrillingTapping
Set-upPrecision turning
Unclamp
Machine 1 Machine 2 Machine 3
DMU / DMC 80 FD, DMU / DMC 125 FD – complete machining process
Single-purpose machines – conventional machining process
1 2
3
24
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Example applications
ê Technology integration
DMG MORI gearMILL®
Gear production – complete machining.
Highlights
+ Complete machining on one machine for lower overall investment and space requirements:
Turning Drilling Gear milling
+ Soft and hard machining
+ Attainable gear quality Bevel spur gear DIN ≤ 5 Spur gear DIN ≤ 6 (depending on the pitch circle diameter)
1: Turning 2: Tapping 3: Gear milling with standard tools
DMG MORI gearMILL® software – the software
package for various gear production operations
Highlights of the DMG MORI gearMILL® software
+ Calculation of the tooth geometry of spur gears, straight and helical gear teeth, double helical gears (herringbone), couplings
+ Calculation of the tooth geometry of bevel spur gears with straight or helical gear teeth, spiral gears, shaft angle equal to or not equal to 90°, with and without offset (hypoid gear)
+ Calculation of the tooth geometry of worms and worm wheels, ZA flank profile, ZN flank profile, ZI flank profile
+ Generation of individual contact patterns
+ Individual tooth flank and profile modifications
+ Generation of four- and five-axis milling paths
+ Generator for 3D measurement data
+ Machine simulation
+ Quality control on the CNC milling machine with output protocol
+ Custom training concept with technology transfer
1 32
25
ULTRASONIC technology integration
Unbeatable range of materials thanks to ULTRASONIC and milling on one machine.
ULTRASONIC machining is a pioneering technology for the production of complex geometries in high-tech materials which is finding its way into almost every sector with unbelievable speed. Thanks to the kinematic overlapping of tool rotation with additional axial oscillation, high- performance materials which are normally difficult to machine can be economically processed to the highest quality. The low process forces allow the production of thin walls and result in longer tool service life and significantly reduced micro-cracks in the material. Depending on the material properties, outstanding surface finishes of Ra < 0.1 μm can be achieved.
Advantages of ULTRASONIC
+ Reduced process forces for outstanding surface finishes Ra < 0.2 µm, minimised micro- cracks in the material, longer tool service life
+ Up to twice the removal rates compared to conventional grinding processes
+ The cutting edge sharpens itself thanks to micro-splinters in the diamond grains
+ Optimised particle removal in the active zone
The operating principle – flexible ULTRASONIC integration via HSK
When changing to the HSK tool holder, inductive transmission of the ULTRASONIC frequency takes place from the fixed transmitter segment at the spindle tip to the rotating coil on the HSK holder.
ULTRASONIC HSK-63- actuator system
ULTRASONIC HSK-100- actuator system
max. 18,000 rpm max. 12,000 rpm
1: Finish grinding of a chemically resistant Si-quartz pump housing on an ULTRASONIC 125 FD duoBLOCK® 2: ULTRASONIC 60 FD duoBLOCK®: Thin-walled lightweight structures of a Zerodur mirror carrier 3: Silicon nitride camera housing
Receiver Coil
Transmitter Segment
26
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Tool magazines
ê Milling heads
DMU / DMC P / U / FD duoBLOCK® series
Innovative milling heads and intelligent tool management.
A-axis + More flexible production of complex shapes
thanks to negative angles up to –30°
+ Full use of the X-axis travel for every A-axis angle
+ Optimal interference contour when using angle heads
+ User-friendly axis kinematics thanks to the swivel plane positioned at 90°
* Available on the DMU 100 P4 upwards
B-axis + Complete five-axis milling performance
+ The 45° swivel plane results in minimal loss of working area
+ Very short overhang / distance from the tool to the guideways in the X-axis
+ Very stiff milling head with good damping and low moments of force thanks to the swivel plane positioned at 45°
+ Outstanding milling behaviour regardless of the direction of the machining forces
+ No axis clamping necessary
+ Also available as a 5X torqueMASTER® gear- driven spindle with up to 1,300 Nm torque
A-axis B-axis
SK40 / CAT 40 / HSK-A63 SK40 / CAT 40 / HSK-A63
SK50 / CAT 50 / HSK-A100* SK50 / CAT 50 / HSK-A100
NEW!
1
2
3
4
27
Maximum workpiece dimensions and tool magazine configurations Sizes 80, 100, 125 and 160
SK40 / CAT 40 / HSK-A63
Tool holder SK40 (HSK-A63)*
Magazine type / maximum 453 Pockets
Measurements (adjacent pockets occupied) mm ø 80 // Length 550** / 650
Measurements (adjacent pockets free) mm ø 120 // Length 550** / 650
Boring bar measurements mm ø 280 × 160 // Length 350 (400*)
Weight kg 15
Maximum torque Nm 25
Chip-to-chip time (HSK) sec. 4.2 (applies to the 80 series)
SK50 / CAT 50 / HSK-A100
Tool holder SK50 (HSK-A100)*
Magazine type / maximum 303 Pockets
Measurements (adjacent pockets occupied) mm ø 110 // Length 550** / 650
Measurements (adjacent pockets free) mm ø 200 // Length 550** / 650
Boring bar measurements mm ø 400 × 280 // Length 400 (470*)
Weight kg 30
Maximum torque Nm 70
Chip-to-chip time (HSK) sec. 4.5 (applies to the 80 series)
* FD only with HSK-A tool holder, ** DMU 80 P / FD duoBLOCK®
Principle of operation1 The selected tool is on wheel 2
2 Free path (three empty pockets) for the shuttle on wheel 1 by turning the wheel
3 The shuttle (double gripper) travels to the selected tool; lift to release the tool from the holder, shuttle travels to the spindle
4 Exchange / replacement of the tool and retraction of the double gripper
SK40 / HSK-A63 SK50 / HSK-A100
Number of wheels 1 2 3 4 5 1 2 3 4 5
Number of tools 40 63 123 183 273 363 453 40 63 123 183 243 303
DMU 80 / 100 / 125 P, DMU 80 FD * * * * * * *DMC 80 / 100 / 125 U, DMC 80 FD – –
DMU 125 FD – – – – – – –
DMC 125 FD – – – – – – – –
DMU 160 P – * * * * – * * *DMU 160 FD – – – – – – – – * * * standard, optional, * on request
41 2 3
5
28
1: Manufacturing system with three machining centres, two- level linear storage with 52 workpiece positions and central tool magazine with 400 pockets2: Manufacturing cell for hydraulic components 3: Fully automated production of gearboxes 4: DMC H duoBLOCK® with RS7 / 12 5: RS7 rotary storage
Flexible Manufacturing cell
+ 6 × DMC H duoBLOCK®
with workpiece handling
+ Prioritised processing on the next available machine
+ Simultaneous machining of three different components
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Automation
29
DMU / DMC P / U / FD duoBLOCK® series
duoBLOCK® – The basis for custom automation solutions.
Workpiece handlingMachines with and
without pallet changer
Pallet handlingMachines
without pallet changer
Pallet handlingMachines
with pallet changer
Automation solutions
Articulated robotic arms
Portal loader
RS7: 5-pallet rotary storage (7 pallets in the system) – –
RS12: 10-pallet rotary storage (12 pallets in the system) – –
Container solutions – –
Flexible pallet systems (linear storage) – –
Configuration levels / periphery
Central tool magazines
Wash
Deburr
Measure
Workpiece marking
available, – not available
30
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Power diagrams
SK50 / HSK-A100 motor spindle
12,000 rpm / 44 kW / 288 Nm
powerMASTER SK50 / HSK-A100 motor spindle
9,000 rpm / 77,5* kW / 1.000* Nm
SK40 / HSK-A63 motor spindle
15,000 rpm / 35 kW / 130 Nm
5X torqueMASTER® SK50 / HSK-A100 geared spindle
6,300 rpm / 37 kW / 1,300 Nm (optional 8,000 rpm)
SK40 / HSK-A63 motor spindle
20,000 rpm / 35 kW / 130 Nm
SK40 / HSK-A63 motor spindle
15,000 rpm / 46 kW / 200 Nm
DMU / DMC P / U / FD duoBLOCK® series
Power diagrams
All data collected with 40 % DC* 15 % DC (2 min)
HSK-A100 motor spindle
15,000 rpm / 52 kW / 404 Nm
HSK-A63 motor spindle
24,000 rpm / 26 kW / 85 Nm
19 kW 100%
26 kW 40%
60 Nm 100%
85 Nm 40%
20 63 160
400
1,00
0
2,50
0
6,30
0
12,0
00
18,0
0024
,000
40
20
10
5
2
1
680
315
125
50
25
8
Torque(Nm)
Spe
ed(r
pm)
Power(kW)
25 kW 100%
86 Nm 100%
35 kW 40%
130 Nm 40%
Spe
ed(r
pm)
Power(kW)
Torque(Nm)
320
160
80
40
20
10
5
30
15
7.5
3.8
1.9
0.9
0.5
0.2
0.1
20
1,25
0
2,50
0
5,00
0
10,0
0015
,000
1,10
0
2,80
0
5,70
0
30
15
7.5
3.8
1.9
0.9
0.5
0.2
0.1
320
160
80
40
20
10
5
Spe
ed(r
pm)
Power(kW)
Torque(Nm)
20
1,25
0
2,50
0
5,00
0
10,0
00
20,0
00
35 kW 40%
130 Nm 40%
86 Nm 100%
25 kW 100%
1,10
0
2,80
0
5,70
0
2515
7.5
3.7
1.9
0.9
0.5
0.2
0.1
320
160
80
40
20
10
5
Spe
ed(r
pm)
Power(kW)
Torque(Nm)
20
1,25
0
2,50
0
5,00
0
10,0
00
15,0
00
200 Nm 40%
46 kW 40%
30 kW 100%
130 Nm 100%
2,20
02,
800
4,30
0
7,76
09,
830
32 kW 100%
44 kW 40%
187 Nm 100%
288 Nm 40%
40
25
10
53.152
630
400
200
160
10063
5
Torque(Nm)
Spe
ed(r
pm)
Power(kW)
20
1,00
01,
400
2,45
0
4,06
0
8,00
0
10,0
00
12,0
00
45 kW 100%
580 Nm 100%
54 kW 40%
77.5 kW 15%700 Nm 40%
1,000 Nm 15%80
50
40
15
1,000
700
600
100
Torque(Nm)
Spe
ed(r
pm)
Power(kW)
20 740
3,00
0
9,00
0
42 kW 100%
300 Nm 100%
52 kW 40%
430 Nm 40%
50
20
10
5
2
1
0.9
1,000
500
250
100
50
25
10
5
Torque(Nm)
Spe
ed(r
pm)
Power(kW)
20 50
1,00
0
2,50
0
6,30
0
12,0
00
27 kW 100%
831 Nm 100% 37 kW 40%
1,300 Nm 40%
20 190
400
1,40
0
8,00
0
64
32
16
8
4
2
2,048
512
128
32
Spe
ed(r
pm)
Power(kW)
Torque(Nm)
52 kW 40%
42 kW 100%
280 Nm 100%
404 Nm 40%50
45
40
35
30
25
400
350
300
250
Torque(Nm)
200
150
100
50
20
15
10
5
15,0
00
1,00
0
1,31
01,
710
100
10,0
00
Spe
ed(r
pm)
Power(kW)
SK50 / HSK-A100 motor spindle
12,000 rpm / 52 kW / 430 Nm
31
Spindle range
Speed // Tool carrierPerformance (40 % DC), torque (40 % DC)Speed range: Spindle run-up time
DMU / DMC 80 P / U
duoBLOCK®
DMU / DMC 100 P / U
duoBLOCK®
DMU / DMC 125 P / U
duoBLOCK®
DMU / DMC 160 P / U
duoBLOCK®
15,000 rpm // SK40 / HSK-A63*35 kW, 130 Nm0 – 15,000 rpm: 1.65 sec.
20,000 rpm // SK40 / HSK-A63*35 kW, 130 Nm0 – 20,000 rpm: 2.6 sec.
15,000 rpm // SK40 / HSK-A63*46 kW, 200 Nm0 – 15,000 rpm: on request
24,000 rpm // HSK-A6326 kW, 85 Nm0 – 24,000 rpm: 3.5 sec.
–
12,000 rpm // SK50 / HSK-A100*44 kW, 288 Nm0 – 12,000 rpm: 3.5 sec.
12,000 rpm // SK50 / HSK-A100*52 kW, 430 Nm0 – 12,000 rpm: 4.5 sec.
9,000 rpm // SK50 / HSK-A100* / ***77,5** / 54 kW, 1,000** / 700 Nm0 – 9,000 rpm: 1.9 sec.
15,000 rpm // HSK-A100*52 kW, 404 Nm0 – 15,000 rpm: 4.7 sec.
6,300 rpm (8,000 rpm)*1) // SK50 / HSK-A100*37 kW, 1,300 Nm0 – 6,300 rpm: on request
Spindle range mill-turn
Speed // Tool carrierPerformance (40 % DC), torque (40 % DC)Speed range: Spindle run-up time
DMU / DMC 80 FD
duoBLOCK®
DMU / DMC 125 FD
duoBLOCK®
DMU / DMC 160 FD
duoBLOCK®
15,000 rpm // HSK-A6335 kW, 130 Nm0 – 15,000 rpm: 1.65 sec.
–
–
20,000 rpm // HSK-A6335 kW, 130 Nm0 – 20,000 rpm: 2.6 sec.
–
–
12,000 rpm // HSK-A10044 kW, 288 Nm0 – 12,000 rpm: 3.5 sec.
12,000 rpm // HSK-A10052 kW, 430 Nm0 – 12,000 rpm: 4.5 sec.
6,300 rpm (8,000 rpm)*1) // HSK-A100*37 kW, 1,300 Nm0 – 6,300 rpm: on request
standard, optional, – not available, * optional, ** 15% DC (2 min), *** only in connection with shoulder / face contact 1) Spindle data only applicable to clockwise rotation. Data for anti-clockwise rotation available on request.
1 2 3
32
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Machining examples
DMU / DMC P / U / FD duoBLOCK® series
High-performance milling, drilling and tapping.
speedMASTER® 20,000 rpm / 35 kW / 130 Nm motor spindle
High-performance milling High-performance drilling Tapping
Workpiece material Steel (Ck45) Steel (Ck45) Steel (Ck45)
Material removal rate 520 cm³/min 435 cm³/min –
Tool Face mill ø 63 mm Modular drill ø 54 mm Tap M24
Spindle speed 1,800 rpm 1,650 rpm 464 rpm (Vc = 35 m/min)
Feed 2,600 mm/min (Fz = 0.24 mm) 190 mm/min (Fu = 0.115 mm) 1,400 mm/min
Depth / width of cut 4 / 50 mm – –
1 2 3
speedMASTER® 15,000 rpm / 46 kW / 200 Nm motor spindle
High-performance milling High-performance drilling Tapping
Workpiece material Steel (Ck45) Steel (Ck45) Steel (Ck45)
Material removal rate 500 cm³/min 794 cm³/min –
Tool Face mill ø 80 mm Modular drill ø 54 mm Tap M24
Spindle speed 955 rpm 1,650 rpm 530 rpm (Vc = 40 m/min)
Feed 2,741 mm/min (Fz = 0.41 mm) 347 mm/min (Fu = 0.21 mm) 1,600 mm/min
Depth / width of cut 3.5 / 52 mm – –
1 2 3
4 5 6
33
powerMASTER 9,000 rpm / 77.5* kW / 1,000* Nm torque spindle
High-performance milling High-performance drilling Tapping
Workpiece material Steel (Ck45) Steel (Ck45) Steel (Ck45)
Material removal rate 1,680 cm3/min 900 cm3/min –
Tool Indexable insert cutter ø 100 (11 inserts)
Modular drill ø 100 Tap M42
Spindle speed 900 rpm (Vc = 280 m/min) 673 rpm (Vc = 200 m/min) 60 rpm (Vc = 8 m/min)
Feed 14,000 mm/min (Fz = 1.42 mm) 115 mm/min (Fz = 0.18 mm) 270 mm/min (Fz = 4.5 mm)
Depth / width of cut 2 / 60 mm – / – – / –
* 15 % DC (2 min)
4 5 6
12,000 rpm / 44 kW / 288 Nm motor spindle
High-performance milling High-performance drilling Tapping
Workpiece material Steel (Ck45) Steel (Ck45) Steel (Ck45)
Material removal rate 812 cm3/min 708 cm3/min –
Tool Indexable insert cutter ø 100 (7 inserts)
Modular drill ø 70 Tap M30
Spindle speed 1,255 rpm (Vc = 394 m/min) 1,023 rpm (Vc = 225 m/min) 106 rpm (Vc = 10 m/min)
Feed 2,900 mm/min (Fz = 0.33 mm) 186 mm/min (Fz = 0.8 mm) 371 mm/min (Fz = 3.5 mm)
Depth / width of cut 3.5 / 80 mm – / – – / –
4 5 6
12,000 rpm / 52 kW / 430 Nm torque spindle
High-performance milling High-performance drilling Tapping
Workpiece material Steel (Ck45) Steel (Ck45) Steel (Ck45)
Material removal rate 864 cm3/min 800 cm3/min –
Tool Indexable insert cutter ø 160 (9 inserts)
Modular drill ø 80 Tap M42
Spindle speed 1,000 rpm (Vc = 500 m/min) 900 rpm (Vc = 225 m/min) 46 rpm (Vc = 6 m/min)
Feed 1,800 mm/min (Fz = 0.2 mm) 144 mm/min (Fz = 0.16 mm) 207 mm/min (Fz = 4.5 mm)
Depth / width of cut 4 / 120 mm – / – – / –
4 5 6
34
Applications and parts
Highlights
Control technology
Overview
Technical data
DMU / DMC P / U / FD duoBLOCK® series
Technical dataDMU 80 P / FD dB® DMU 100 P dB® DMU 125 P / FD dB® DMU 160 P / FD dB® DMC 80 U / FD dB® DMC 100 U dB® DMC 125 U / FD dB®
Working area
X-, Y- and Z-axis mm 800 × 1,050 × 850 1,000 × 1,250 × 1,000 1,250 × 1,250 × 1,000 1,600 × 1,600 × 1,100 800 × 1,050 × 850 1,000 × 1,250 × 1,000 1,250 × 1,250 × 1,000
Distance from spindle centre to table
Horizontal milling head mm
50 to 900 50 to 1,050 50 to 1,050 50 to 1,150 (FD: 185 to 1,285)
50 to 900 20 to 1,020 20 to 1,020
Vertical milling head mm –300 to 750 –300 to 950 –300 to 950 –300 to 1,300 –300 to 750 –300 to 950 –300 to 950
Distance from spindle nose to table
Horizontal milling head mm –200 to 850 –200 to 1,050 –200 to 1,050 –200 to 1,400 –200 to 850 –200 to 1,050 –200 to 1,050
Vertical milling head mm
150 to 1,000 150 to 1,150 150 to 1,150 150 to 1,250 (FD: 285 to 1385)
150 to 1,000 120 to 1,120 120 to 1,120
Table / Workpiece mounting surface / Workpieces
NC rotary table rpm 40 35 35 15 40 35 35
Table size mm Ø 900 × 700 Ø 1,100 × 900 Ø 1,250 × 1,100 Ø 1,600 × 1,250 Ø 800 × 630 Ø 1,000 × 800 Ø 1,000 × 800
Maximum table load kg 1,500 2,200 2,500 4,500 1,400 2,000 2,000
Turn-mill table (FD) rpm 800 – 500 300 (100 % DC), 400 (< 10 min) 800 – 500
Table size mm Ø 800 – Ø 1,250 Ø 1,500 Ø 800 – Ø 1,100
Maximum table load kg 1,300 – 2,300 4,000 1,200 – 2,000
NC-controlled swivelling milling head (B-axis) Standard Standard Standard Standard Standard Standard Standard
Swivel range (0 = vertical / 180 = horizontal) Degrees –30 to 180 –30 to 180 –30 to 180 –30 to 180 –30 to 180 –30 to 180 –30 to 180
Rapid traverse and feed rpm 30 30 30 30 30 30 30
Five-axis options
5X torque MASTER® – NC-controlled B-axis with gear-driven spindle
Swivel range (0 = vertical / 180 = horizontal) Degrees 0 to 180 0 to 180 0 to 180 0 to 180 0 to 180 0 to 180 0 to 180
Rapid traverse and feed rpm 30 30 30 30 30 30 30
NC-controlled swivelling milling head (A-axis)
Swivel range (0 = vertical / –90 = horizontal) Degrees –120 / +10 –120 / +10 –120 / +10 –120 / +10 –120 / +10 –120 / +10 –120 / +10
Rapid traverse and feed rpm 30 30 30 30 30 30 30
Main drive
Integrated motor spindle rpm 12,000 12,000 12,000 15,000 12,000 12,000 12,000
Tool holder SK 40 / HSK-A63* SK 40 / HSK-A63 SK 40 / HSK-A100* SK 40 (FD: HSK-A100) SK 40 / HSK-A63* SK40 / HSK-A63 SK40 / HSK-A 100*
Power (40 / 100 % DC) kW 35 / 25 35 / 25 35 / 25 35 / 25 (FD: 44 / 32) 35 / 25 35 / 25 35 / 25
Torque (40 / 100 % DC) Nm 130 / 86 (FD: 111 / 77) 130 / 86 130 / 86 (FD: 288 / 177) 111 / 85 (FD: 288 / 187) 130 / 86 (FD: 111 / 77) 130 / 86 130 / 86 (FD: 288 / 177)
Tool changer
Tool holder SK40 SK40 SK40 SK 40 (FD: HSK-A100) SK40 SK40 SK40
Tool magazine wheel Pockets 40 (63. 123) 40 (63. 123) 40. 63 (123) 63 (123) 63 (123 / 183 / 273 / 363 / 453)
63 (123 / 183 / 273 / 363 / 453)
63 (123 / 183 / 273 / 363 / 453)
Linear axis (X / Y / Z)
Feed speed, rapid traverse speed m/min 60 60 60 60 60 60 60
Acceleration m/s2 7 6 / 5 / 6 6 / 5 / 6 6 / 4 / 7 7 6 / 5 / 6 6 / 5 / 6
Feed force kN 13 / 13 / 9 15 / 18 / 18 15 / 18 / 18 15 / 18 / 18 13 / 13 / 9 15 / 18 / 18 15 / 18 / 18
P max. (X / Y / Z) – VDI DGQ 3441 / ISO-230-2 µm 5 6 6 7 5 6 6
P smax. (X / Y / Z) – VDI DGQ 3441 / ISO-230-2 µm 4 5 5 5 4 5 5
Machine data
Space requirements of base machine plus chip conveyor, without internal coolant supply
m2
18.7
26
27
37.6
21.4
27.9
29.9
Machine height (standard machine) m 3.1 3.4 3.4 3.8 3.4 3.9 3.9
Machine weight kg 15,500 24,500 26,000 35,000 20,500 26,500 28,500
* HSK-A tool holder included as standard with mill / turn machines
35
DMU 80 P / FD dB® DMU 100 P dB® DMU 125 P / FD dB® DMU 160 P / FD dB® DMC 80 U / FD dB® DMC 100 U dB® DMC 125 U / FD dB®
Working area
X-, Y- and Z-axis mm 800 × 1,050 × 850 1,000 × 1,250 × 1,000 1,250 × 1,250 × 1,000 1,600 × 1,600 × 1,100 800 × 1,050 × 850 1,000 × 1,250 × 1,000 1,250 × 1,250 × 1,000
Distance from spindle centre to table
Horizontal milling head mm
50 to 900 50 to 1,050 50 to 1,050 50 to 1,150 (FD: 185 to 1,285)
50 to 900 20 to 1,020 20 to 1,020
Vertical milling head mm –300 to 750 –300 to 950 –300 to 950 –300 to 1,300 –300 to 750 –300 to 950 –300 to 950
Distance from spindle nose to table
Horizontal milling head mm –200 to 850 –200 to 1,050 –200 to 1,050 –200 to 1,400 –200 to 850 –200 to 1,050 –200 to 1,050
Vertical milling head mm
150 to 1,000 150 to 1,150 150 to 1,150 150 to 1,250 (FD: 285 to 1385)
150 to 1,000 120 to 1,120 120 to 1,120
Table / Workpiece mounting surface / Workpieces
NC rotary table rpm 40 35 35 15 40 35 35
Table size mm Ø 900 × 700 Ø 1,100 × 900 Ø 1,250 × 1,100 Ø 1,600 × 1,250 Ø 800 × 630 Ø 1,000 × 800 Ø 1,000 × 800
Maximum table load kg 1,500 2,200 2,500 4,500 1,400 2,000 2,000
Turn-mill table (FD) rpm 800 – 500 300 (100 % DC), 400 (< 10 min) 800 – 500
Table size mm Ø 800 – Ø 1,250 Ø 1,500 Ø 800 – Ø 1,100
Maximum table load kg 1,300 – 2,300 4,000 1,200 – 2,000
NC-controlled swivelling milling head (B-axis) Standard Standard Standard Standard Standard Standard Standard
Swivel range (0 = vertical / 180 = horizontal) Degrees –30 to 180 –30 to 180 –30 to 180 –30 to 180 –30 to 180 –30 to 180 –30 to 180
Rapid traverse and feed rpm 30 30 30 30 30 30 30
Five-axis options
5X torque MASTER® – NC-controlled B-axis with gear-driven spindle
Swivel range (0 = vertical / 180 = horizontal) Degrees 0 to 180 0 to 180 0 to 180 0 to 180 0 to 180 0 to 180 0 to 180
Rapid traverse and feed rpm 30 30 30 30 30 30 30
NC-controlled swivelling milling head (A-axis)
Swivel range (0 = vertical / –90 = horizontal) Degrees –120 / +10 –120 / +10 –120 / +10 –120 / +10 –120 / +10 –120 / +10 –120 / +10
Rapid traverse and feed rpm 30 30 30 30 30 30 30
Main drive
Integrated motor spindle rpm 12,000 12,000 12,000 15,000 12,000 12,000 12,000
Tool holder SK 40 / HSK-A63* SK 40 / HSK-A63 SK 40 / HSK-A100* SK 40 (FD: HSK-A100) SK 40 / HSK-A63* SK40 / HSK-A63 SK40 / HSK-A 100*
Power (40 / 100 % DC) kW 35 / 25 35 / 25 35 / 25 35 / 25 (FD: 44 / 32) 35 / 25 35 / 25 35 / 25
Torque (40 / 100 % DC) Nm 130 / 86 (FD: 111 / 77) 130 / 86 130 / 86 (FD: 288 / 177) 111 / 85 (FD: 288 / 187) 130 / 86 (FD: 111 / 77) 130 / 86 130 / 86 (FD: 288 / 177)
Tool changer
Tool holder SK40 SK40 SK40 SK 40 (FD: HSK-A100) SK40 SK40 SK40
Tool magazine wheel Pockets 40 (63. 123) 40 (63. 123) 40. 63 (123) 63 (123) 63 (123 / 183 / 273 / 363 / 453)
63 (123 / 183 / 273 / 363 / 453)
63 (123 / 183 / 273 / 363 / 453)
Linear axis (X / Y / Z)
Feed speed, rapid traverse speed m/min 60 60 60 60 60 60 60
Acceleration m/s2 7 6 / 5 / 6 6 / 5 / 6 6 / 4 / 7 7 6 / 5 / 6 6 / 5 / 6
Feed force kN 13 / 13 / 9 15 / 18 / 18 15 / 18 / 18 15 / 18 / 18 13 / 13 / 9 15 / 18 / 18 15 / 18 / 18
P max. (X / Y / Z) – VDI DGQ 3441 / ISO-230-2 µm 5 6 6 7 5 6 6
P smax. (X / Y / Z) – VDI DGQ 3441 / ISO-230-2 µm 4 5 5 5 4 5 5
Machine data
Space requirements of base machine plus chip conveyor, without internal coolant supply
m2
18.7
26
27
37.6
21.4
27.9
29.9
Machine height (standard machine) m 3.1 3.4 3.4 3.8 3.4 3.9 3.9
Machine weight kg 15,500 24,500 26,000 35,000 20,500 26,500 28,500
* HSK-A tool holder included as standard with mill / turn machines
36
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Options
DMU / DMC P / U / FD duoBLOCK® series
Options
DMU 80 P / FD dB® DMU 100 P dB® DMU 125 P / FD dB® DMU 160 P / FD dB® DMC 80 U / FD dB® DMC 100 U dB® DMC 125 U / FD dB®
Manual table options
Hydraulic clamping for table
Tool holder
HSK-A63 / BT40 / CAT40 HSK-A for turn-mill machines as standard
HSK-A100 / BT50 / CAT50 HSK-A for turn-mill machines as standard
Automation / Measurement / Monitoring
3D quickSET®
Infrared measuring sensor: HEIDENHAIN TS649 / Renishaw PP60 (OMP 60)
Tool measurement in the working area, Blum Laser NT hybrid
Mechanical tool breakage detection in the tool magazine
Combined tool measurement in the working area, laser system for milling tools, 3D scanner for turning tools (FD)
– (FD) (FD) (FD)
– (FD)
Four-colour signal lights
Coolant / Chip disposal
Production package with 600 litre coolant unit, paper band filter, 40 bar internal coolant supply
Standard
Standard
Standard
Standard
–
–
–
Production package with 980 litre coolant unit, paper band filter, 40 bar internal coolant supply
Standard
Standard
Standard
80 bar internal coolant supply frequency-controlled
Temperature control for the 600 / 980 litre internal coolant supply system
Coolant gun with 1-bar pump, 40 litres per minute
Minimum quantity lubrication through the spindle and through external nozzles
Oil and emulsion mist filter (included as standard with turn-mill machines)
Air cooling through the spindle
Optional Heidenhain TNC 640 control systems
Application Tuning Cycle ATC
Electronic TNC 640 hand wheel
Control console for tool magazine loading station
Active Chatter Control ACC
Options SIEMENS 840D solutionline Operate
Electronic SIEMENS 840D hand wheel
Control console for tool magazine loading station
DECKEL MAHO package MDynamics
General options
Shatterproof safety glass viewing panels (Standard with FD)
Operating mode 4 ”Process monitoring in production”
Package for increased precision
Heavy-duty machining package
optionally available
37
DMU 80 P / FD dB® DMU 100 P dB® DMU 125 P / FD dB® DMU 160 P / FD dB® DMC 80 U / FD dB® DMC 100 U dB® DMC 125 U / FD dB®
Manual table options
Hydraulic clamping for table
Tool holder
HSK-A63 / BT40 / CAT40 HSK-A for turn-mill machines as standard
HSK-A100 / BT50 / CAT50 HSK-A for turn-mill machines as standard
Automation / Measurement / Monitoring
3D quickSET®
Infrared measuring sensor: HEIDENHAIN TS649 / Renishaw PP60 (OMP 60)
Tool measurement in the working area, Blum Laser NT hybrid
Mechanical tool breakage detection in the tool magazine
Combined tool measurement in the working area, laser system for milling tools, 3D scanner for turning tools (FD)
– (FD) (FD) (FD)
– (FD)
Four-colour signal lights
Coolant / Chip disposal
Production package with 600 litre coolant unit, paper band filter, 40 bar internal coolant supply
Standard
Standard
Standard
Standard
–
–
–
Production package with 980 litre coolant unit, paper band filter, 40 bar internal coolant supply
Standard
Standard
Standard
80 bar internal coolant supply frequency-controlled
Temperature control for the 600 / 980 litre internal coolant supply system
Coolant gun with 1-bar pump, 40 litres per minute
Minimum quantity lubrication through the spindle and through external nozzles
Oil and emulsion mist filter (included as standard with turn-mill machines)
Air cooling through the spindle
Optional Heidenhain TNC 640 control systems
Application Tuning Cycle ATC
Electronic TNC 640 hand wheel
Control console for tool magazine loading station
Active Chatter Control ACC
Options SIEMENS 840D solutionline Operate
Electronic SIEMENS 840D hand wheel
Control console for tool magazine loading station
DECKEL MAHO package MDynamics
General options
Shatterproof safety glass viewing panels (Standard with FD)
Operating mode 4 ”Process monitoring in production”
Package for increased precision
Heavy-duty machining package
optionally available
38
Applications and parts
Highlights
Control technology
Overview
Technical data
ê Floor plans
Floor plan DMU 80 P / FD duoBLOCK®
Side view Plan view with wheel magazine, 40 pockets
Floor plan DMU 100 P duoBLOCK®
Side view Plan view with wheel magazine, 63 pockets
Floor plan DMU 125 P / FD duoBLOCK®
Side view Plan view with wheel magazine, 63 pockets
DMU / DMC P / U / FD duoBLOCK® series
Floor plans
3,0
59 T
ran
spor
t h
eig
ht
4,465
3,6
55
Op
tion
oil
mis
t fi
lter
975
3,4
27 2,7
48
2,4
34
Tran
spor
t w
idth
wit
hou
t m
agaz
ine
5,534
952
3,2
92.
5 Tr
ansp
ort
hei
gh
t w
ith
out
mag
azin
e
3,8
55.
5 O
pti
onal
oil
mis
t fi
lter
4,964
4,2
23
4,2
23 3,
25
3.5
Tran
spor
t w
idth
3,2
53.
5Tr
ansp
ort
wid
th
6,1446,144
R1,308.5
Chipconveyer
470
952
Out
put
heig
hte
3,29
2.5
Tran
spor
t he
ight
wit
hout
mag
azin
e
3,46
2 M
ax. c
law
hei
ght
(ste
el c
over
)
3,85
5
4,964
R1,308.5
3,57
8 Tr
ansp
ort
wid
th
Hydraulic clamping unit
6,144
Chip conveyer
Floor plan DMU 160 P / FD duoBLOCK®
Side view Plan view with wheel magazine, 63 pockets
7,503
6,100
3,71
5 Tr
ansp
ort
heig
ht
4,10
9
8,683
6,06
2
3,80
8 Tr
ansp
ort
wid
th
Floor plan DMC 100 U duoBLOCK®
Side view Plan view with wheel magazine, 63 pockets
Floor plan DMC 80 U / FD duoBLOCK®
Side view Plan view with wheel magazine, 63 pockets
3,6
58
Op
tion
al o
il m
ist
filt
er
3,0
59 T
ran
spor
t h
eig
ht
975
4,999
Chip conveyer
R1,309
6,068
2,74
9 Tr
ansp
ort
wid
th
2,43
4
952
3,3
20
Tran
spor
t h
eig
ht
wit
hou
t m
agaz
ine
3,8
56
Op
tion
al o
il m
ist
filt
er
5,702
4,1
48
4,1
48
6,882
3,17
9Tr
ansp
ort
wid
th3,
179
Tran
spor
t w
idth
R1,309
Chipconveyer
Floor plan DMC 125 U / FD duoBLOCK®
Side view Plan view with wheel magazine, 63 pockets
952
3,3
19.5
Tr
ansp
ort
hei
gh
t w
ith
out
mag
azin
e
3,8
55.
5 O
pti
on o
il m
ist
filt
er
5,822
4,3
48
4,3
48
5,8225,822
3,4
98
.5 T
ran
spor
t w
idth
3,4
98
.5 T
ran
spor
t w
idth
R1,300
Chipconveyer
Universal
With a wide range of spindles, from the 15,000 rpm motor spindle with 130 Nm to the new 5X torqueMASTER® gear-driven spindle rated at 1,300 Nm and 37 kW.
PR
O.D
6789
_011
6UK
S
ubje
ct t
o m
odif
icat
ion.
Tec
hnic
al u
pdat
e ri
ghts
res
erve
d. T
he m
achi
nes
depi
cted
her
e m
ay in
clud
e so
me
opti
ons,
equ
ipm
ent
and
CN
C a
lter
nati
ves.
DMG MORI Europe AGSulzer-Allee 70, CH-8404 WinterthurTel.: +41 (0) 58 / 611 5000, Fax: +41 (0) 58 / 611 [email protected], www.dmgmori.com
Germany: DMG MORI Deutschland Riedwiesenstraße 19 D-71229 Leonberg Tel.: +49 (0) 71 52 / 90 90 - 0 Fax: +49 (0) 71 52 / 90 90 - 20 00 Service Hotline: +49 (0) 180 5 49 00 22
Europe: DMG MORI Europe Sulzer-Allee 70 CH-8404 Winterthur Tel.: +41 (0) 58 / 611 5000 Fax: +41 (0) 58 / 611 5001 Service Hotline: +41 (0) 446 545 670
Asia: DMG MORI Japan 2-3-23 Shiomi Koto-ku, Tokyo JP-135-0052, Japan Tel.: +81 3 - 6758 - 5900 Fax: +81 3 - 6758 - 5919
America: DMG MORI USA 2400 Huntington Blvd. Hoffman Estates, IL 60192 Tel.: +1 (847) 593 - 5400 Fax: +1 (847) 593 - 5433
DMG MORI Austria Oberes Ried 11 A-6833 Klaus Tel.: +43 (0) 55 23 / 69 141 - 0 Fax: +43 (0) 55 23 / 69 141 - 100 Service Hotline: +43 (0) 17 95 / 76 109
_ Stockerau Josef-Jessernigg-Straße 16 A-2000 Stockerau Tel.: +43 (0) 55 23 / 69 141 - 0 Fax: +43 (0) 55 23 / 69 141 - 100
DMG MORI Benelux _ Netherlands Wageningselaan 48 NL-3903 LA Veenendaal Tel.: +31 (0) 318 - 55 76 - 11 Fax: +31 (0) 318 - 52 44 - 29 Service Hotline: +31 (0) 202 00 81 83
_ Belgium Hermesstraat 4B B-1930 Zaventem Tel.: +32 (0) 2 / 7 12 10 - 90 Fax: +32 (0) 2 / 7 12 10 - 99 Service Hotline: +32 (0) 2 / 2 200 62 - 52
DMG MORI Czech Kaštanová 8 · CZ-620 00 Brno Tel.: +420 545 426 311 Fax: +420 545 426 310 Service Hotline: +420 239 000 561
_ Planá Chýnovská 535 CZ-39111 Planá nad Lužnicí Tel.: +420 381 406 914 Fax: +420 381 406 915
_ Slovakia Brnianska 2 SK-91105 Trenčín Tel.: +421 326 494 824
DMG MORI France Parc du Moulin · 1 Rue du Noyer B.P. 19326 Roissy-en-France F-95705 Roissy CDG Cedex Tel.: +33 (0) 1 / 39 94 68 00 Fax: +33 (0) 1 / 39 94 68 58 Service Hotline: +33 (0) 8 10 90 20 20
_ Lyon Parc des Lumières 1205 Rue Nicéphore Niepce F-69800 Saint-Priest Tel.: +33 (0) 4 / 78 90 95 95 Fax: +33 (0) 4 / 78 90 60 00
_ Toulouse Futuropolis Bat. 2 · 2 Rue Maryse Hilsz F-31500 Toulouse Tel.: +33 (0) 5 / 34 25 29 95 Fax: +33 (0) 5 / 61 20 89 19
_ Haute-Savoie Espace Scionzier · 520 avenue des Lacs F-74950 Scionzier Tel.: +33 (0) 4 / 50 96 41 62 Fax: +33 (0) 4 / 50 96 41 30
DMG MORI Hungary Vegyész u. 17 – 25 · B. Building H-1116 Budapest Tel.: +36 1 430 16 14 Fax: +36 1 430 16 15 Service Hotline: +36 1 777 90 57
DMG MORI Ibérica Pol. Ind. Els Pinetons Avda. Torre Mateu 2 – 8 · Nave 1 E-08291 Ripollet · Barcelona Tel.: +34 93 586 30 86 Fax: +34 93 586 30 91 Service Hotline: +34 91 - 2 75 43 22
_ Madrid C / Alcañiz 23 · E-28042 Madrid Tel.: +34 91 66 99 865 Fax: +34 91 66 93 834
_ San Sebastián Edificio Igaraburu Pokopandegi 11, Oficina 014 E-20018 San Sebastián Tel.: +34 943 100 233 Fax: +34 943 226 929 Service Hotline: +34 91 - 2 75 43 22
DMG MORI Italia Via G. Donizetti 138 I-24030 Brembate di Sopra (BG) Tel.: +39 035 62 28 201 Fax: +39 035 62 28 210 Service Hotline: 199 177 811
_ Milano Via Riccardo Lombardi 10 I-20153 Milano (MI) Tel.: +39 02 48 94 921 Fax: +39 02 48 91 44 48
_ Padova Via E. Fermi 7 · I-35030 Veggiano (PD) Tel.: +39 049 900 66 11 Fax: +39 049 900 66 99
DMG MORI Middle East Jebel Ali Free Zone · JAFZA Towers Lob 18, Office 2403, P.O. Box 262 607 Dubai, U.A.E.Tel.: +971 - 4 - 88 65 740 Fax: +971 - 4 - 88 65 741
DMG MORI Polska ul. Fabryczna 7 · PL-63-300 Pleszew Tel.: +48 (0) 62 / 7428 000 Fax: +48 (0) 62 / 7428 114 Service Hotline: +48 (0) 62 / 7428 285
DMG MORI Romania DN 65B, KM. 4 + 471 RO-110180 Pitesti Tel.: +40 248 610 408 Fax: +40 248 610 409
DMG MORI Russia ul. Novohohlovskaya 23 / 1 RU-109 052 Moscow Tel.: +7 495 225 49 60 Fax: +7 495 225 49 61 Service Hotline: +7 495 912 50 09
_ Jekaterinburg ul. Sofi Kowalewskoj 4, litera Z RUS-620049 Jekaterinburg Tel.: +7 343 379 04 73 Fax: +7 343 379 04 74
_ St. Petersburg pr. Obuhovskoy Oborony 271, litera A RUS-192012 St. Petersburg Tel.: +7 812 313 80 71 Fax: +7 812 313 80 71
DMG MORI Scandinavia _ DMG MORI Finland & Baltics Jasperintie 310 FI-33960 Pirkkala Tel.: +358 10 271 4450 Service Hotline: +358 10 271 4460
_ DMG MORI Sweden E A Rosengrens gata 5 SE-421 31 Västra Frölunda Tel.: +46 (0) 771 364 6674 Fax: +46 (0) 31 476 351 Service Hotline: +46 (0) 771 365 724
_ DMG MORI Denmark Robert Jacobsens Vej 60, 2.tv DK-2300 København S Tel.: +45 70 21 11 11 Fax: +45 49 17 77 00 Service Hotline: +45 70 21 11 12
_ Norway Bergsli Metallmaskiner AS Bedriftsveien 64 NO-3735 Skien Tel.: +47 35 50 35 00 Fax: +47 35 50 35 70
DMG MORI Schweiz Sulzer-Allee 70 CH-8404 Winterthur Tel.: +41 (0) 58 / 611 5000 Fax: +41 (0) 58 / 611 5001 Service Direct Line: +41 (0) 58 / 611 5555 Service Hotline: +41 (0) 446 545 670
DMG MORI South East Europe Ag. Georgiou 5 – Patriarchiko Pylaias, Cosmos Offices, PO 60233 GR-57001 Thessaloniki Tel.: +30 2310 474486 Fax: +30 2310 474487
DMG MORI Turkey Ferhatpaşa Mah. Gazipaşa Cad. No: 11 TR-34885 Ataşehir · İstanbul Tel.: +90 216 471 66 36 Fax: +90 216 471 80 30 Service Hotline: +90 216 47 16 636
DMG MORI UK 4030 Siskin Parkway East Middlemarch Business Park Coventry CV3 4PE · GB Tel.: +44 (0) 2476 516 120 Fax: +44 (0) 2476 516 136 Service Direct Line: +44 (0) 2476 516 130 Service Hotline: +44 (0) 20 30241514
DMG MORI Africa Representative WIN-TECH Machinery & Tooling 90 El Thawra Street El Golf Area Heliopolise 11341 Cairo, Egypt Tel.: +202 2 690 36 08 Fax: +202 2 690 36 09
Headquarters Europe
Always close by! www.dmgmori.com
PR
O.D
xxxx
_xxx
xUK
S
ubje
ct t
o m
odif
icat
ion.
Tec
hnic
al u
pdat
e ri
ghts
res
erve
d. T
he m
achi
nes
depi
cted
her
e m
ay in
clud
e so
me
opti
ons,
equ
ipm
ent
and
CN
C a
lter
nati
ves.