Upload
amphenol-sine-systems
View
223
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Amphenol Sine Systems’ Distributed Power & Control interconnect products provide you increased options for Power, Control and Communication connectivity on a ‘plug and play’ basis. Modular, crush-resistent, factory-molded connectors eliminate the need for hard-wired or traditional conduit installations. The strength of our interconnect systems are their simplicity. Standardization of these systems offer reduced installation, start-up and service time during routine maintenance. With the creation of these products, the reliability and performance associated with Amphenols industrial products continues to grow and help your bottom line.
Citation preview
Female Male
Pin 1 Pin 1
Pin 1
www.sineco.com
P WER CONTR LAmphenol Sine Systems’ Distr ibuted Power & Control interconnect products provide you increased options for Power, Control and Communication connectivity on a ‘plug and play’ basis. Modular, crush-resistent, factory-molded connectors eliminate the need for hard-wired or traditional conduit installations. The strength of our interconnect systems are their simplicity. Standardization of these systems offer reduced installation, start-up and service time during routine maintenance. With the creation of these products, the reliabil ity and performance associated with Amphenols industr ial products continues to grow and help your bottom line.
4C (8 or10)AWG X 1 Shielded 14AWG Pair8AWG: Power 32A, Signal 5A, 600V10AWG: Power 25A, Signal 5A, 600V (High Flex avail.)UL Type TC-ER/STOOW, CSA or c(UL) STOOWRoHS CompliantTemp Rating: +105°C / UL2237 ListedCables, Tee’s, Receptacles:Short Circuit Rating of 65kANFPA-79 Compliant
3 phase + GRD + Shield + 4 relay contacts9 pin: 40A, 600V, 8/10/12AWGUL Type TC-ER, CSA AWM I/II A/B, FT-4 Flame RatingUL Listed and CSA Listed / IP65 RatingHigh Flex and/or Shielded availableTemp Rating: -40°C to +125°CCables, Tee’s, Receptacles:Short Circuit Rating of 5kA (w/ 30A breaker)Short Circuit Rating of 100kA (w/ CC Class fuse)NFPA-79 Compliant
3 pole: 30A, 600VAC, 10/14AWG4 pole: 25A, 600VAC, 10/14AWGUL Type TC-ER/STOOW, CSA STOOWHigh Flex and/or Shielded availableRoHS CompliantTemp Rating: +105°C / UL2237 ListedCables, Tee’s, Receptacles:Short Circuit Rating of 65kANFPA-79 Compliant
Simple ‘Plug and Play’ Designs • No Tooling Required • Pipe and Wire is EliminatedNo Need for Trays/Raceway • Significant Cost Savings • Easily Scalable and Modular
Ideal for conveyor systems and many other types of Factory Automation applications.
New!
30A 25AAmperage
32A, 25AAmperage
40AAmperagePower BOSS
Power & Control Distribution System
Power BOSS M40featuring CHECK MATETM
Pin 1
Female Male
Pin 1
4C 13AWG X 5C 18AWG Shielded (1 pair & 1 triad)9 pin High Flex Hybrid Cable: 600VPower 10A, Signal 5AUL Type TC-ER, CSA AWM I/II A/B, FT-4 Flame RatingRoHS Compliant / UL2237 Listed / Temp Rating: +90°CCables, Tee’s, Receptacles:Short Circuit Rating of 45kANFPA Compliant
15A, 2AAmperage
© 2012 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice.
www.sineco.com
DeviceNetBOSSPower Distribution System
BOSS M12Signal Distribution System
ControlPower6 Pin / 5 Used
DeviceNetDistribution Boxes
DeviceNet + Auxilliary Power9 pin: 600V, 14/18AWGPower 15A at 40°C, Signal 2A at 40°CUL Type TC-ER 600V Class IUL and CSA Pending / IP65 RatingTemp Rating: -40°C to +125°C
New!
Flyer Number: DPPCF2013
10A, 5AAmperage
Additional Product Offerings
Proven Global ArchitectureAmphenol Sine Systems’ Distributed Power and Control products have been installed on a global level. Our architecture is operating in North and South America, Africa, Europe and Asia.
Alvaro Arrocha, Program Manager1 . 8 0 0 . 3 9 4 . 7 7 3 2 Ext. 8 6 19 [email protected]
Control BOSSHybrid Power & Communication Network
ArmorStart™