Disrupters in over 65 Countries Across the World I.E.D. Bomb Disposal ... · PDF fileThis Revolutionary device can be used for IED EOD Bomb Disposal as well as Breaching, Multi-mount

• Disrupter Water Cannons• Standard and Electric Ammunition• Blasting Cap Containment• Carry Cases• Back Packs

• EOD Equipment • R & D Availability• Training• Laser Sights• Stands

Disrupters in over 65 Countries Across the World

1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253 Website: Http//www.RoyalArms.com • E-mail: [email protected]

I.E.D.BombDisposalEquipment

RADC-9 RADC-12 RADC-18 & RADC-24

Honed to a mirror finish for improved Accuracy /Velocity and ease of cleaning. Accepts highpower loads and all commercial 12 Gauge. 24”Barrel has a unique tapper length that reducesoverall weight and allow robots arms to articulateeasily by removing the weight in front. The rearacts as a counter balance providing smooth opera-tion for robots.

DISRUPTER CANNONS

•Body length = 9.00” 12.00” 18.00" or 24”•O.A.L. = +.75” Breach Bolt•Weight = all under 8.25 Lbs•Machined from 17-4 Stainless•1.500" Diameter for strength •1.500" Diameter taper to 1.25” for Robot use on 24” •Precision gun drilled to .730”•Honed to a mirror finish

•3-1/2" 12 Gauge Chamber•Acme Threads - Quick solid lock up•2-1/2" Welded Body ring •6-1/4" Knurled back end•External Laser location hole•Chamfered exterior crown•Reduced Breech bolt length•6 & 7 Breach Bolt inserts for Electric and Time Fuse


RADC-9 KitKit includes:• Disrupter Cannon, Breech Bolt inserts (6 & 7)• HB-10 Electric Igniter • RDI Shock Tube Igniter• 4 Dz. Water Plug Sets• 12 Rounds PBB-70• 5 Rounds each PBA, PCA and SLUG• Stop plate w/ Bag Stand• Pelican 1450 custom case

Electric Ammunition at slightly higher price

RADC-9 Basic Includes RADC-BS, StopPlate, cleaning equipment and case w/ 6 and 7Breach Bolt Inserts

Royal Arms 18” Cannon Basic set in a box. Includes:• RADC 18 (Disrupter Cannon)• Breech Bolt with inserts for Time Fuse & ElectricShots • WP (water plug) • LC#1 (NEW Custom Case with foam)• PR (pushrod for cleaning)

LC-1 Kit

DISRUPTER CANNONS & KITS


RADC-18 KIT Cannon & Accessories Our Kit includes:• Disrupter Cannon with Breech Bolt inserts (6 & 7) • SL-150 Green Laser• Pushrod w/cleaning Mop• Dead Hammer• Disrupter Pole Stand and Cannon Holder with slide• EBM-15 Electric Igniter • Electric Cable Reel• RDI Shock Tube igniter• 4 Dz. Water Plug Sets• 20 Rounds PBB-12E • 15 Rounds each PBA-12E & PCA-12E • 5 Rounds Slug-12E• 10 Rounds PCA• 12 Rounds PBB-7 • Custom Locking Case

RADC-24 KIT Cannon & AccessoriesNo Laser or Laser Holder included in Standard Kit. In-LineLaser and Muzzle Break available as additional equipmentAmmunition not included in Kit

DD- Disposable DisrupterSingle use Disrupter perfect for long range trips No need to carry bulky orheavy equipment, just a few different loads and an igniter or 9V battery in apinch. Can be used with an optional stop ring for placement in Robots or hold-ers. Inexpensive alternative to dearmers. • DD-PCA Clayvon (clay/steel Mixture)• DD-PBA Copper Compressed• DD-Slug Hollow point (Solid steel )• DD-PBB Blank (Air or Water Shot)• DD-FB Flash BANG (Air ONLY!)• DD-CSL Customer Specified Load

DDRC- Recoilless Disposable Disrupter Samespecs as previous but RECOILLESS with adapter tube• DDRC-PCA Clayvon (clay/steel Mixture)• DDRC-PBA Copper Compressed• DDRC-Slug Hollow point (Solid steel )• DDRC-PBB Blank (Air or Water Shot)• DDRC-FB Flash BANG (Air ONLY!)• DDRC-CSL Customer Specified Load• RDD-T Recoilless Launch Tube Required for Recoileless Use

Multi-use unit NOT disposable

RADC-27mm Cannon & AccessoriesInformation on inside back page and atRoyalarms.com

DISRUPTER STANDS


PS Disrupter Pole StandFully adjustable base can be sand bagged to prevent blow over.Adjustable Up, Down, Left, Right, Angle up Angle down. Headinterchangeable with all Royal Arms Disrupters. Total Weight 15.5Lbs Height up to 9’ Smaller version w/18” poles fits in Travel Back PackBase T-section 1018 Steel Legs 6061 AluminumHead 6061 Aluminum Poles Aluminum w/pvc coverBottom Pole Steel w/PVC cover

RADC-BSThe 5” square Bag Stand is designed for use with all Cannons. Theincluded 1/4” Aluminum stop plate protects the bag from damageand the variously angled corners facilitate unlimited shooting angles.Top strap for carrying. Weight when filled 8 to 12 lbs. Dependingon fill. Total weigh of Cannon, Stop Plate and Bag Stand for the 18”cannon is approximately 18 -1/2 Lbs.

TBP Travel Back PackBack pack Intended for use where space is critical in air transport,repelling and remote operations. Unit carries cannons, igniters,ammunition, water, bag stand, shock tube and ground-wire reels.Separate Velcro® closures and pockets, retain individual itemssecurely and readily accessible for quick response. Side pocket car-ries Pole Stand with 18” legs Specify which cannon when ordering ,DD- Disposable Disrupters, Recoilless units, RADC-9, RADC-18,RADC-24, RADC-27 or PAN.

DUCKFOOT #DF3DDThis Revolutionary device can be used for IED EOD Bomb Disposalas well as Breaching, Multi-mount for ROBOT usage Depending onthe Robot mount, this may be attached vertically or horizontally toallow for multiple shots from one deployment. Precision machined6061 Aluminum


IGNITERS

STI Single Pen Shock Tube igniterSTI Body is made of Solid 6061 T-6 Aluminum that’s been milled out. Stainless SteelInternal parts, and a brass head with quick connect. Dual Safeties, one internal and one onthe body. Length 6-1/2” Dia. 1/2” Wt. 3 Oz.

ROYAL DUAL IGNITERRoyal Arms dual shock tube igniter is the smallest most reliable mechanical igniter on themarket today. It has been tested and proved in Iraq Afghanistan and other Hostile environ-ments. When your shot is on the line trust our RDI every time.

Weight: 0.75 lbs. Overall Length: 6” Overall Height: 1.325”w/ brass heads & connectors w/ Trigger button

Body Length: 4.950” Body Height: 0.635” Body Width: 1.5”

RDI Body Material: 6061 T6 Black anodized Aluminum

Firing Pins, Stops, Trigger, Primary Safety, Springs, Bolts & Cross Bar Material:made of Stainless and Steel- Zinc Coated for rust protection.

Receiver Heads: Knurled Brass 1.580” X 0.5” Connectors: Quick Connects

Dual Safeties: Primary Safety: Trigger Sear Block Rotate forward to engage Safety show-ing green S When rotated 180º backwards, shows a Red F for fire.

Secondary Safety: Quick release pins which blocks firing pins

RDI-QDB Quick detach block Navy style with clamp head. Requires additional clamp attachment to back of RDI for mounting.Sold individually and as a unit.

BBI-8K Shock tube Breach Bolt KitBreach bolt for use with all Royal Arms Cannons. Kit contains the SS BreachBolt w/magnetic inserts to hold SS ball (firing pin) 25 SS balls, the cleanoutextractor pin and 5 Push-fit connectors. Installation of this unit in a cannonconstitutes creation of a fire arm and is required to be registered with ATF.Purchase of this item will be on separate PO and billed on separate Invoice.


BHQ (Lower Base Half)Replacement Brass Head for Any Shock tube igniter with 7/16-20 threads(Mark 54, Mark 55, Omni, DX10 RDI, STI) • Slotted back for easy extraction • Lower half base unit that accepts the primer

BH-OSC (Upper Half)(1 needed per unit)Compression Fit holds in Shock Tube from .080 - .150 Dia.

STC-B Upper Half Push-fit1/8” Instant fit for use with standard Commercial Shock tube Blue topSTC-B2 Upper Half Push-fit5/32 Instant fit for use with Military Grade Nonel Shock tube Black topSTC-B4 Upper Half Push-fit1/4 Instant fit for use with Time Fuse

FROM LEFT TO RIGHT BHQ w/ STC-BBHQ w/ STC-B2BHQBH-OSCBHQ w/ BH-OSC

STC-Y Connectors Steel Instant fit Shock tube connector 1 line in - 2 lines outSTC-Y2 Nylon Instant fit Shock tube connector Y fitting1 line in - 2 lines outSTC-Y3 Brass Nickel Plate Instant fit Shock tube connector Y fitting 1 line in - 2 lines out

STC-I Inline Connectors Steel Instant fit Inline Shock tube couplerSTC-I2 Nylon Instant fit Inline Shock tube coupler

We suggest you change your BH (Brass Heads) to our new style units with more options available for connections.Parts used on our earlier Canons, are available in limited quantities.

WP Water Plug Sets Can also be used to keep dirt and debris out of cannon while not in use. Black plug seals chamber. Red plug seals muzzle

CONNECTORS

EOD PRICE LIST 2014All International / Export orders will be quoted based on Regulations

Model# Length Dia. Price

RADC-18 12GA. 3.5” Chamber 18.5” 1.5” $995Disrupter Cannon with External Breech Bolt, Stop ring, Breech bolt inserts BBI-6 & BBI-7

RADC-18 LCK 18.5” 1.5” $1395.00Cannon as above with Cleaning and Accessories kit in custom case

RADC-18 Kit Will shoot any commercial 12 gauge round $4,295.00RADC-18 Cannon, 1 Laser, cleaning Equipment, Dead Hammer, Pole Stand, HB-10, Electric Cable Reel,RDI, Water Plug Sets, 75 Rounds various Ammunition, 3 Gal. Snot Kit, in a Storm custom case,

RADC-24 12GA. 3.5” Chamber 24” 1.5”>1.125” Taper $1,095.00Tapered barrel to reduce weight. Ideal for use on Robots, weights Under 8lbs. BBI-6 & BBI-7 . Alsoavailable Recoilless Muzzle Break Ti-MB listed under the Tools Section

RADC-24 K 12GA. 3.5” Chamber 24” 1.5”>1.125” Taper $4,395.00Same equipment and accessories as the RADC-18 Kit

RADC-9 NEW - 12GA. 3.5” Chamber 9” Cannon 1.50” $1,095.00Replaces the IDC-9 units Now OD increased to 1.5” and uses standard External Breech Bolt Kit includes Bag Stand/Stop Plate, Breech bolt Inserts (#’s 6 &7) Pushrod, in custom carry all case.

RADC-9 NEW Kit- 12GA. 3.5” Chamber 9” Cannon 1.50” $2,395.00 Kit includes HB-10 & RDI Igniters, Water Plug, 27 Rounds Standard ammunition or Electric rounds atslightly higher price. Please ask for pricing on All Electric option

RADC-27MM 27mm 18” 37mm POR17-4 Stainless Steel. 37mm in diameter. gun drilled 27mm, honed to a mirror finish Chamfered exterior crown 6 1/4 knurled back end Vapor honed exterior finish. Electric contact breech Will accept the following cartridges: Royal Arms PS65 MKII NSN# 1385 FSC and - PT1066 NSN# 1385-99-958-3696 - L46A1 NSN# 1385-99-965-7874 Also available as a kit Call for Pricing

DD-PCA/SLUG/PBA/PBB/FB/CSL - 6” Cannon 1.125” $43.00 12 GA. Disposable Disrupter - 6 different PRE loaded types (see catalog for detailed info)

DDRC-PCA/SLUG/PBA/PBB/FB/CSL - 6” Cannon 1.125” $46.0012 GA. RECOILLESS Disposable Disrupter - 6 different PRE loaded types (see catalog for detailed info)

RDD-T 10” Tube 1.750” $275.0012 GA. RECOILLESS HOLDER for DDRC Note! (Required for any DDRC to function properly).

Ind

us

tria

l T

oo

ls

All listed prices are for U.S. Domestic sales only! and are subject to change without notice

5/2013

Dis

po

sa

ble

Warning: Insertion of BBI-8 or BBI-5 in any of the cannons reclassifies it to an NFA weaponand must be registered with ATF. Must be on a separate purchase order from any cannon sale!

BBI-8K Insert for all 12 Ga. External Cannons, Required for Standard primed Ammo $129.00Kit includes (1) BBI-8 Breech bolt insert, (4) STC-B 1/8” instant fit shock tube connectors,(25) BBs-8 3/32 ball bearings, & PR-8 Push Rod for stuck Balls.



AMMUNITION: 12 GA for use in Disrupters only! Model# Packaging Price

Royal Arms 12 Gauge Ammunit ion wil l work with al l Disrupters

Std. Primed - Blank/30 Gr. for Water/Snot Low Velocity PBB-3 Box of 12 48.00

Std. Primed - Blank/50 Gr. for Water/Snot Low Velocity PBB-5 Box of 12 48.00

Std. Primed - Blank/70 Gr. for Water/Snot High Velocity PBB-7 Box of 12 54.00

Std. Primed - Blank/82 Gr. Ultra-High Velocity PBB-UV Box of 12 56.00

Std. Primed - Clayvon Frangible Slug PCA Pack of 5 27.50

Std. Primed - Copper Frangible Slug PBA Pack of 5 27.50

Std. Primed - Pointed Penetrator CPA Pack of 5 38.00

Std. Primed - Hardened Slugs (Hollow Point) SLUG Pack of 5 35.00

Std. Primed - Bean Bag (for PVC- I.E.D. 375 (FPS) BB-EOD Pack of 5 28.75

Std. Primed - #9 Bird Shot (2600 FPS) BS#9 Pack of 5 27.50

Std. Primed - Copper/S-70 750 Gr.. TESAR-4 Box of 12 66.00

Electrical Squibbed - Blank Red Dot H.V. (30 Grain) PBB-3E Box of 10 70.00




Electrical Squibbed - Blank Ultra Velocity PBB-UVE Box of 10 75.00

Electrical Squibbed - Clayvon (365 Grains) most all IED PCA-12E Pack of 5 42.50

Electrical Squibbed - Copper Frangible (400 Grain) PBA-12E Pack of 5 42.50

Electrical Squibbed - Pointed Penetrator CPA-12E Pack of 5 47.50

Electrical Squibbed - Hardened Slugs (Hollow Point) SLUG-12E Pack of 5 45.00

Electrical Squibbed - Aluminum (LWP) High Speed ALU-12E Pack of 5 42.50

Electrical Squibbed - Bean Bag ( for PVC- I.E.D. 400 FPS) BB-12E Pack of 5 40.00

Electrical Squibbed - #9 Bird Shot (2600 FPS) BS#9E Pack of 5 37.50

MOST AMMUNITION AVAILABLE IN 3.5” at a slightly higher price

AMMUNITION: 12 GA and 27mm Annodized aluminum cartridge, Oring seal CARTRIDGE / DISRUPTER COMPATIBILITY: Replaces the Following Cartridges:Cartridge PT1066 NSN 1385-99-958-3696 Cartridge L46A1 NSN 1385-99-965-7874•Operates in the Following Disrupters:

Royal Arms RADC-27 Disrupter--FSC 1385

– NSN 1385-99-208-3317 -– NSN 1385-99-207-8890PS65MKII CARTRIDGE SPECIFICATIONS / PACKAGING• Overall Length = 1.65″ / 42mm

AMMUNITION SHIPPING NOTE!!All Electric Ammunition and Squib are subject to a $35.00 DOT UPS Hazard Charge per Box Ground. All non-electric Ammunitionshipped Next Day, 2nd Day or Third Day are subject to a $35.00 Charge per Box. These charges are per box over and above thestandard shipping charges. DOT Charges reflect US prices only.

Sta

nd

ard

Pri

me

dE

lec

tric

al

Sq

uib

be

d


Ammunition Components3” 12 Gauge Premium Primed Hulls PH Per 100 20.00Electric Squib 1 Foot Lead (28 BR) ES Each 2.50Wads Unsplit Smooth Side WADS Per 100 21.00Clayvon Filled Wads CFW Each 1.75Clayvon Frangible Mix CLAY Per LB. 15.00Brass Primer inserts to hold Squib head BPIS Per 100 40.00“SNOT” Kit, Replaces Water shot& double’s the distance SNOT Per Kit 32.00Snot Refills available in 4oz, 8oz, 16oz (Specify) SNOT-R/4/8/16 16.95, 24.95 & 36.95

IGNITERS Electric, Shock Tube Breach Bolt Shock Tube Inserts & TestersShock Tube Royal Dual Igniter uses 12 Ga. primers RDI 449.00Shock Tube Royal Dual Igniter w/QDB Quick Change Head RDI-QDB 549.00Navy Style Quick Disconnect Head QDB 129.00Electric Igniter w/built in Continuity tester EBM-15 349.00Shock Tube - Single Pen Igniter/NAVY style uses 12 ga. primers STI 149.00Wizard Self Contained Continuity tester Triangle Design DSL 79.00ETI Pull String Continuity Tester ETI 99.00

STANDS:Pole Stand 4 piece unit 6 foot Height (12’ maximum) PS $475.00Pr. Stop Plates Stand 3/8” Aluminum” for RADC-18 & 24 SPS 65.00Bag Stand/Stop Plate (For RADC-2 - 12lbs filled weight) RADC-BS 99.00

LASERSBoresight Laser 5mw Green High Visability SL-500 249.00SG-120 Inline laser Lifetime Warentee SG-120 499.00

CASES: Note! (All cases come with Custom Foam Cutouts Replacement foam available)Lockable Case for RADC Disrupter & Basic Parts LC-1 225.00Custom Storm Case for RADC Disrupter Kit, Stand & all parts PCC-1650 399.00Custom Pelican Case for RADC 9 Disrupter & all Parts in Kit PCC-1450 225.00Travel Back Pack (Specify Disrupter) TBP 399.00

TOOLSDual Shock Tube/Fuse Cutter DC-5 149.00Dual Shock Tube/Fuse Cutter replacement Blades DC-5 Blade 5.50Dual Blasting Cap Crimp Non-Metallic -- Non-Sparking DC-6 149.00EOD Safety Mirror Kit and Accessories ESMK2 349.00

(Punch, Spare Mirrors and Case included)Recoilless Titanium Muzzle Break for 24” Cannon Ti-MB 1249.00Gerber Titanium/Delrin Probe Kit PKG 199.00D.E.T. Multi-Plier 600 w/Case D.E.T. 105.00


ELECTRIC PARTS, REELS and ACCESSORIES Model# Packaging PriceElectric Cable Reel - 310 Ft Cable on Winder Reel 5.5Lbs Reel Each 189.00Travel Reel 5 ” X 2 1/2“ With 200’ Electric Cable - T REEL-E Each 175.00

w/1 folding and 1straight handleTravel Reel - Blank Only 5” Dia.. TRB Each 21.00Travel Reel - Blank with Handles TRW Each 110.00Blasting Cap Travel/Fire Safety Tube (304 Stainless) BCT Each 299.00PAN Breech Bolt KIT for Electric & time fuse Pan BB Each 179.00

SHOCK TUBE PARTS:Brass Head for Any Shock tube igniter (7/16x 20 TPI). BHQ Each 16.50Brass Head Compression tip for BHQ BH-OSC Each 11.00Shock Tube instant fit 1/8” Connector Commercial STC-B Each 4.40Shock Tube instant fit 5/32” Connector Military STC-B2 Each 4.00Shock Tube Inline Instant fit Connector STC-I Each 4.00Shock Tube Inline NYLON Push fit Connector STC-I2 Each 4.00Shock Tube Y Connector NYLON Push fit STC-Y2 Each 5.00Shock Tube Y Connector Nickel Plated Brass Push fit STC-Y3 Each 11.00External Shock Tube Insert (BCX External cannon required) BBI-8k Each 129.00Replacement Firing Pins .094 Bearing (BBI#8 required) BBs-8 100pcs 15.00External Breech Cap for RADC18X, RADC24 & IDC9 BCX Each 159.00Clean Out tool for BBI-8 PR-8 Each 10.95

REPLACEMENT PARTS The parts listed below are the most commonly Used, Lost or damaged items. Instruction Manual Replacement Complete INST 5.00Pole Stand 2 Ft Aluminum Section w/ Bolt PSP-Alum 41.00Pole Stand 2 Ft Steel Section no bolt PSP-Steel 50.00Sleeve for IDC, for use in DCS & PS Stands IDC-SH 22.00Push Rod (2-pc. set)Water plug seating &Cleaning PR-1 40.00 Dead Hammer 1Lb (for Breech Bolt lock up ) DH 18.00Water Plug Sets (Red & Black) Packed 25 per bag WP 7.50Water Plugs For Recoil-less Disrupter Tube DDRC-WP Per Dz.. 12.00Replacement Bag Stand for IDC Cannon RADC-BS 99.00

REPLACEMENT PARTS AND REPAIR SERVICES FOR

ALL ROYAL ARMS MANUFACTURED EQUIPMENT AVAILABLE

Cannon Stands, Cannon Components ie Breech Bolts, Breech Bolt Inserts for Internal and External Cannon’s (New and old designs) Dual and Single Shock Tube Igniters

Please call for pricing and up-dating of your older equipmentIf you have any questions about use of our equipment,

PLEASE contact us, we will be glad to assist you.

AMMUNITIONComplete line of 12 Gauge Disrupter Ammunition


PBB-3, 5, 7 & UVE Standard Prime BlankPBB-3E 5E, 12E & UVE Electric Blanks Standard primed and Electric low and hign powered blanks for use withWater/ SNOT or air Shots Velocity: see ammo spec sheetDistance: 1”- 6” or to 3 Feet with SNOT Angle: Various Target: PVC Pipe, Brief/Suite Cases, Ammo Cans

STANDARD PRIMED ELECTRIC PRIMED

PBA Copper Frangible Standard and PBA-12E Electric 420 Grain Frangible Copper projectile for pipe bomb and Grenades Velocity: 2,390 Ft p/sec -18” BarrelDistance: 6”- 30 FeetAngle: 7º-11º or 90ºTarget: Grenades (cast only), Pipe to 2 1/2”

PCA Standard and PCA-12E Electric Clay S/70 Steel365 Grain Clay S/70 Steel mix for All Pipe bombs and galvanizedIED’sVelocity: 2,450 Ft p/sec -18” BarrelDistance: 6”- 60 FeetAngle: 7º-11º or 90ºTarget: Ammo cans, and pipes to 2.5”

SLUG Standard & SLUG-12E Electric Hollow Point541 Grain Hollow Point 4130 Steel hardened to 58-62 Rockwell Velocity: 2,260 Ft p/sec -18” Barrel Standard Velocity: 2,190 Ft p/sec -18” Barrel ElectricDistance: 6”- 30 FeetAngle: VariousTarget: Grenades, Copper IED’s, 3/8 Steel plate, galvanized

pipe, 90º pipe and internal thread pipe bombs CPA Penetrator Point CPA-12E Penetrator Point625 Gr. Penetrator Point 4130 Steel hardened to 58-62 Rockwell for Velocity: 2,370 Ft p/sec -18” Barrel StandardVelocity: 2,340 Ft p/sec -18” Barrel ElectricDistance: 6”- 30 FeetAngle: 90º or 0º onlyTarget: CO2 Bottles, 3/8 Steel plate, Heavy Duty galvanized

pipe, reinforced IED

REELElectric Cable reel with Red and Black Coated connections for easy Hookup. Anchor on body makes it easy to wind up and Has 310 feet of cableso you have enough room to stand clear. Weighs just 5 lbs and is 12x9x4

T Reel-E Equipped with electric cable 5” Dia. w/ 200 feet of cable. Made of polyurethane. The primary handleis cam mounted to spin Free and fold flat to the side. The secondaryhandle is Removable. Individual blank reels, TRB are available withand without handles. Change time for handles is less than 30 seconds.

DSL Demolition Safety Light Electrical continuity tester.• Reads 10+Mil-Spec blasting caps over 3000 feet of 22 Ga wire.• Over 120 hours of continuous duty or 90,000 five-second circuit tests.• LED “On” indicates a good circuit - readable in direct sunlight.• Lightweight waterproof polymer housing designed for positive “feel”.• Output of less than 5 milli-amps. • Size 1-3/4” X 3/4” - Total weight 1-3/4 ounce• All Mil-Spec components. • 900% safety factor.• Seven year shelf life. - Guaranteed.

EIT-CT Pull String Continuity tester for firing circuits and explosive devices.

• LED “On” indicates a good circuit • EXTRA bright Readable in direct sunlight.• Lightweight waterproof polymer housing • Output of less than 5 milli-amps. • All Mil-Spec components.• 900% safety factor• Pull String belt clip


EBM-15 Electric Blasting Machine w/ Built in ContinuityRoyal Arms Contracted with EIT corp to have the ultimate in reliableand safe blasting machines for use in Blasting or EOD IED demolitions. • 150VDC 1.25 Joules 50 Ohm 9V Battery• Wareproof - Impact Resistant • Pushbutton Switch Protectors• Quick Connect Binding Posts • 2 Second Charge Fire• Compact 3 ” w x 1.5”d x 4”h design • Built in Redundant Safeties • Separate circuit for Continuity & Fire

ELECTRICAL

Kit Accessories & Misc.

DH- Dead HammerFor opening Breech Bolt when locked shut. Hit hammer on end ofbolt to knock loose

PR Push RodThree piece Cleaning/extraction rod and brush. Used to clean as well as extract shells. The Rear section seats the water plugto the proper depth (shown at left). PR-1 (not Pictured) has an additional section for the RADC-2/D cannon & the RADC-24


SL-500 LASERThe SL-500 uses an ultra bright green laser which

is 50 to 100 times brighter than red lasers, and ismuch easier to see in daylight. The SL-500 usesone DL 123 Lithium Battery (included) thatprovides a battery life of up to 10 hours(continuous use). The SL-500 uses the latest lasertechnology to provide superior boresightingaccuracy. Super-strong magnets in the arborsecurely centers the laser within the muzzle for consistent accuracy. A unique system of adapters and O-rings make for asnug accurate fit.

TI-MB Titanium Muzzle Brake Fits RADC-24 Cannons and all 1.125 barrels. Will work with Robot mountsand not interfere. Significantly reduces recoil on robot arms, by up to 80%and retards the muzzle blast allowing you to get even closer on water shotsor other slug shots

ESMK2 EOD / ICE MirrorReplaceable Acrylic 10” x 10” Mirror Heat / Cold Shatter ResistantHead rotates 210º Quick change for additional tools or longer pole.Supplied with 4ft pole expandable to 8ft - Aluminum fittings standard thread for most extension polesFolds flat for storageSoft zippered case holds assembled unit with supplied pole and 2 additional mirrors units

DC-6 Dual Blasting Cap CrimperKey Features:

1. Dual Blasting Cap Crimper, Fuse Cutter & Explosive Punch2. Symmetrical uniform Teeth3. Balistic Nylon Case, Velcro Closure w/Belt Loop4. Non-reflective Anodized Matte finish

Technical Specs:• Length: 7.05 in. (179mm)• Width: 1.750 in. (44.5mm)• Thickness: 0.35 in. (8.9mm)• Weight: 3 oz. (0.09 kg)• Powder Punch Diameter: .25 in. (6.5mm )• Powder Punch Length: 2.2 in. (56mm) • Materials: 7075 Hi Strength Billet Aircraft Aluminum • Mil Spec Type III Class II Hard Black Anodized Finish to RC 50


DC-5 Det Cord / Shock Tube CutterKey Features:

1. Dual Edge Razor Blade w/ guillotine action cutting2. German Stainless Steel Razor Blade 3. Balistic Nylon Case, Velcro Closure w/Belt Loop4. Non-reflective Anodized Matte finish

Technical Specs:• Length: 6.85 in. (174mm)• Width: 1.625 in. (41.25mm)• Thickness: 0.35 in. (8.9mm)• Weight: 3 oz. (0.09 kg)• Materials: 7075 Hi Strength Billet Aircraft Aluminum• Blade: 316 Surgical German Stainless • Mil Spec Type III Class II Hard Black Anodized Finish to RC 50

EOD TOOLS

FBG-MKII FlashBang Grenade / Trainer• Impact Accuated Instantanious• Double Safety Pull Pin /With or without Spoon• 209 Primer training insert• Concussion / Sound Disorientation• 12 Gauge Blank Ammunition• 185db at 1-1/2 Atmosphere of preasure• Kit containes Body, Spoon, Pull Pin, Shell Extracter

Primer training insert, 100pcs - 209 PrimersSample Deployment Rounds

FBC Ammunition Ammunition sold in 25 round box

BREECH BOLT:• 2 spring loaded Contact Connectors • Releived back end for easy connection • Fully chamfered edges • Delrin Encased firing pin • Machined from 17-4 Stainless

CARTRIDGE CAPACITY:• Will Accept the following Cartridges

PT1066 L46A1 PS65MkII • Variety of slugs & Frangible's Available• Holds approximately 200mL of Water• Interchangeable nose cones


27MM!Cannon

RADC-27 27MM Disrupter Cannon#RADC-27 Disrupter Cannons are machined from 17-4 Stainless Steel 37mm Diameterfor strength and durability. Precision gun drilled to 27mm then Honed to a mirror finish for improvedAccuracy & Velocity. Chamfered exterior crown for smooth transfer. 6-1/4" Knurled back end for a bet-ter grip. Melonite finish for strength, anti glare and smooth finish. Electric Breach Bolt

DISRUPTER CANNON:• Body length = 18.000" / 457mm• O.A.L. = 19.500" / 495mm• Body O.D. = 1.500” / 38mm• Bore Dia = 1.062” / 27mm• Weight = 6.5 Lbs / 2.95 Kg • Machined from 17-4 Stainless • Precision gun drilled to 1.062” / 27mm • Honed to a mirror finish • Acme Threads - Quick solid lock up • Knurled back end 6.250” / 159mm • Threaded Nose w/Cap to accept Recoil Reducer • Proper exterior crown chamfer • 2-1/2" Welded Body ring Optional• Melonite coated

ROYAL ARMS INTERNATIONAL, Inc, based in Oxnard, California manufactures the finest Bomb Disposal equipmentfor Law Enforcement, Military & Government Agencies, worldwide, bar none. With great pride and a strong commit-ment to quality, Royal Arms offers a leading line of precision-engineered, durable and effective products. Our line ismanufactured using the highest Quality Alloys and state of the art manufacturing techniques. The result is a superiorproduct, with enhanced technical capabilities, which in turn offers law enforcement and military personnel the ultimatetactical advantage in the field.

NOT ONLY ARE OUR PRODUCTS BACKED UP BY AN UNCONDITIONAL LIFETIME WARRANTY THEY AREALSO 100% PROUDLY MADE IN THE USA.

ROYAL ARMS is well known the world over for our Bomb Disposal, Explosive Entry Equipment as well as the ammu-nition needed to effectively answer any situation thru our multiple offerings. We continue to manufacture cutting edgeitems to answer the needs of the EOD community. Always looking to help the Bomb Tech, we welcome inquiries forspecialized equipment or ammunition.

ROYAL ARMS believes in American industry so strongly that when presented with the possibility of out-sourcing ourproducts/labor and materials to China, India or Mexico, Royal Arms International has declined these money saving pro-cedures. Instead, we invested in our infra-structure by acquiring a 10,000 square foot facility located in Oxnard, CA, tobetter serve our customer needs and to support the manufacturing in the United States.

As other companies are raising prices by as much as 60% and cutting jobs, here at Royal Arms, we are finding newways to be more efficient and reduce our manufacturing costs. We pass the savings on to you by not raising prices.Royal Arms principals are founded on making quality products at fair prices, being loyal to our customers and listeningto their needs.

We encourage you to stop by our shop for a tour of our manufacturing facility and production. We want you to witnessfirst hand for yourself our commitment to quality and customer service. Ask yourself how important it is to have aproduct MADE IN THE U.S.A. by American Ingenuity. We look forward to hearing from you.

GOD BLESS THE U.S.A. and our firearms.

MADE IN AMERICABY AMERICANS


Documents

Disrupters in over 65 Countries Across the World I.E.D. Bomb Disposal ... · PDF fileThis Revolutionary device can be used for IED EOD Bomb Disposal as well as Breaching, Multi-mount