Upload
kanishk-kothari
View
208
Download
5
Embed Size (px)
Citation preview
Dimensions
of a seal:
DGS for compressors .
Dry Gas Seals
The idea of a gas film to protect surfaces
is billions of years old.
Compressors are high-speed machines whose trouble
free reliability constitutes a major precondition for
numerous process engineering operations. Where the
satisfaction of our customers is concerned, we bet on
the creativity of our employees, the flexibility of our
production and the quality of our seals. And to keep on
improving our seals and adapting them even better to
your individual requirements our specialists are
constantly involved in the development of new,
innovative ideas. A case in point is the EagleBurgmann
Dry Gas Seal, which with an array of technical features
is setting new standards for compressor seals. Be it in
the three-dimensional gas grooves or the high-loading
elastomer-free secondary seals - all features of the
Burgmann Dry Gas Seal were developed for optimal
effectiveness so that your compressor runs smoothly
and the environment is safely protected.
E A G L E B U R G M A N N D R Y G A S S E A L S
Gas-lubricated mechanical seals of the DGS
series were developed especially for sealing
turbo compressors. They are distinguished
by broad sliding faces and three-dimensio-
nal U or V grooves in the rotating seat. The
combination of face materials used in these
seals is silicon carbide against silicon carbi-
de with a diamond-like carbon coating fea-
turing excellent emergency running pro-
perties. The DGS offers a range of technical
and economical advantages: low operating
costs, a low level of power consumption,
high safety in operation and long service li-
fe, low leakage rates, no oil contamination
of the product and, last but not least, an in-
crease of the compressor's efficiency.
1
Three-dimensional gas grooves:
Production of the highest precision
for your benefit.
E A G L E B U R G M A N N D R Y G A S S E A L S
Burgmann DGS are distinguished by their broad sliding
faces with aerodynamic three-dimensional U and V
grooves which ensure contact-free, trouble-free running
without pressurization even at low speeds, e.g. in
slow-roll mode. The oblique groove bottom developed by
Burgmann is responsible for maintaining the all-
important stability of the gas film. Reproducibility of
groove production to the exact depth is guaranteed by a
purpose-developed manufacturing process. It is quality
features like this which lay the foundation for the
exceptional stability of the gas film on the Burgmann
DGS and hence for the reliable operation of your
compressor. A further important role is played by the
rotating masses within the seal. With this in mind,
Burgmann opted for light-weight silicon carbide and of
course a ceramic-compatible design.
CO compressor
(Atlas Copco) at
Alkos,
Yochon/Korea with
a Burgmann
DGS2/49 gas seal.
p1 = 2.2 ... 28 bar
a; n = 21 ,700 /
34,800 min-1;
medium: carbon
monoxide.
The V-grooves convey the gas by a rotary
movement between the sliding faces. The re-
sulting pressure rise causes the seal faces
to lift off and ensures contact-free operati-
on. V-grooves are dependant on the direc-
tion of rotation (uni-directional).
• Self-cleaning effect trough a
progressive groove bottom
• Variable depth of groove to
effect gas film stability
Silicon carbide with DLC finish.
Thermal conductivity, a higher modulus of
elasticy and good resistance to deformation
are crucial factors when choosing the face
materials. At the same time it has to be re-
membered that rotating masses inside the
seal have an effect on rotor dynamics. Light-
weight silicon carbide is therefore the ideal
face material.
• Sliding faces with diamond-like carbon
coating (DLC)
• Ceramic-compatible design: friction-
locked torque transmission, no stress-
increasing forming operations
• Low centrifugal forces
• Simple centering
Gas in
Rotation
Pressure field
Gas in
Rotation
Pressure build-up in the sealing gap with a
V-groove.
For sliding faces fea-
turing U-grooves the
operating principle is
similar to that for V-
grooves, but with one
decisive difference:
the direction of rota-
tion is independent
(bi-directional).
Pressure build-up in
the sealing gap with
U-groove.
3
The elastomer-free PDGS stays in top shape
even when exposed to high pressure
and low temperature.
E A G L E B U R G M A N N D R Y G A S S E A L S
The outstanding characteristics of the elastomer-free
PDGS is its innovative design combined with a special
PTFE compound for the secondary seals. The secondary
sealing elements specially developed by Burgmann for
this purpose are particularly effective in terms of
automatic alignment and resistance to extrusion,
temperature and chemicals. The operational reliability of
the PDGS is accordingly very high, with stable leakage
rates guaranteed throughout the operating range.
• No explosive decompression
• Controlled sliding forces prevent "hang-up" of the
dynamic secondary seal; the back-up ring and
balancing sleeve are made of tungsten carbide
• Materials in compliance with NACE
• Optimized aerodynamic gas grooves ensure maximal
stability of the gas film
• Diamond-coated sliding faces
• Friction-locked torque transmission of the rotating seat
dw = 25 ... 380 mm
0.984" ... 14.961"
p1 = 1 ... 450 bar a
14 ... 6,526 PSI
t = –170 °C ... +230 °C
–274 °F ... 446 °F
vg = ... 200 m/s
656 ft/s
Available as a single,
tandem and double seal
of cartridge design.
Operating range
The dynamic secon-
dary seal made of
special PTFE compo-
und, with back-up
ring and balancing
sleeve made of
tungsten carbide.
Ethylene compressor
(Demag Delaval)
at the Yashan
Petrochemical Plant
(China). Sealed with
a Burgmann
PDGS1/195.
p1 = 3,8 bar a
t = 80 °C
vg = 100 m/s
n = 7.830 min-1
On expansion turbines
the PDGS achieves
optimal operating re-
sults at extremely
low sealing tempera-
tures of minus 170 °C
(e.g. nitrogen): low
leakage rates in ope-
rating and shut-down
modes, improved effi-
ciency and higher re-
liability.
p1 = 100 bar a
(1400 PSI)
t = –170 ... +230 °C
(–274 °F ... 446 °F)
vg = 200 m/s
(656 ft/s)
Measurement log of a
high pressure qualifi-
cation program for a
PDGS (shaft size 140
mm) operated at 425
bar (6160 PSI).
Result are stable lea-
kage rates and relia-
ble operating charac-
teristics.
5
Liquefication and transport of natural gas
and as well as gas-reinjection in the oil production
process under control.
E A G L E B U R G M A N N D R Y G A S S E A L S
Besides the conventional method of transporting natural
gas via pipelines, an ever increasingly used form of
conveyance and storage is by way of tanks – above all
where the supply of islands or the construction of a
pipeline is not possible or economically viable. In such
instances, natural gas is liquefied by refrigeration (LNG)
– in the process of which its volume is reduced to
around 1 /600th of its original level
– and pumped onto tankers for transport.
Cryogenic testing of a Dry Gas Seal for LNG
applications. This seal with 355 mm
(13,97") shaft diameter is the largest ever
built by EagleBurgmann for mixer refrige-
rant, nitrogen refrigerant and propane com-
pressors. The PDGS was subject to extensi-
ve theoretical and experimental evaluation
to ensure the integrity of the design. The se-
al has an outer diameter of about 650 mm
(25,59") and a weight of about 150 kg (331
pound).
dw = 355 mm (13,97")
Sealed gas = N2, CH4, C2H6, C3H8
p1 = 3.9 ... 23.7 bar g (56,5 .. 343,7 PSI)
t = 30 ... 51 °C (86 °F ... 123,8 °F)
n = 3,060 min-1
p1 = max. 50 bar g (725,18 PSI)
t = –110 °C (–166 °F)
Burgmann PDGS for LNG reliquefaction in-
stalled in close operation with Atlas Copco
at the LNG carrier "Jamal"
dw = 49.5 mm (1,94")
Sealed gas = N2
p1 = 10 ... 22.9 bar g (145 ... 322 PSI)
t = –170 ... 42 °C (–274 °F ... 107,6 °F)
n = 23,000 min-1
p1 = max. 50 bar g (725,18 PSI)
t = –170 ... 150 °C (–274 °F ... 302 °F)
Operating conditions:
Design Data:
Operating conditions:
Design data:
�
Burgmann PDGS in
Gas reinjection
In the production of crude oil, gas from a
neighbouring gas field is pumped into the
formation by means of compressors with
pressure levels of up to 760 bar (11,023
PSI) for the purposes of forcing the oil up to
the surface.The pressures of up to over 400
bar (5,802 PSI) acting on the compressor
seal are reduced by way of a pressure sta-
ge. Further demands made on the seal come
in the form of the cooling caused by the gas
relaxation as well as the high content of H2S
in the gas.
PDGS increases efficiency in
LNG (Liquefied Natural Gas)
Particularly high demands are made on the
sealing technology in the gas liquefaction
process in the form of large shaft diameters
of up to 350 mm (13,97") for correspon-
dingly large compressors and the enormous
temperature differences up to 250 °C (in a
range of –110 to +150 °C).
In case of transport of LNG on tankers the
natural gas evaporates continously in spite
of well insulated tanks. This gas used to be
shed and used to power the ship, but nowa-
days it is reliquefied. The PDGS units on the
compressors and expanders used to this end
are exposed to temperatures of up to
minus 170 °C (–274 °F). Burgmann’s PDGS
seals have been ensuring the environmental-
ly sound, efficient and safe transport of li-
quefied natural gas on such tankers since
2001 .
PDGS qualified for LNG processes at leading
compressor manufacturers and operators.
7
d 1 d H d s
l1 lB l1
B
lB
S DA
DGS
single seal
Application: Where product leakages to the
atmosphere are recognized as safe, e.g. with
air, nitrogen or CO2 compressors.
Labyrinth to the gas side and CSR radial clea-
rance seal to the bearing side are optional.
This version is used as an emission-free ar-
rangement with a corresponding flare/vent
connection.
Primary leakage is then discharged with the
separating gas to the flare/vent.
In the case of dirty gases the gas to be sea-
led has to be filtered in addition and convey-
ed to the seal chamber via connection "A".
The resulting current from the sealing com-
partment prevents impurities reaching the
seal.
DGS
tandem seal
Application: Where small product leakages of
process gas are admissible, e.g. on gas pipe-
line compressors. Seal on the atmosphere si-
de acting as a safety seal. The tandem arran-
gement provides a particularly high degree of
operational safety.
The seal on the product side and the seal on
the atmosphere side are able to absorb the
complete pressure differential. Under normal
operating conditions the full pressure is re-
duced only by the seal on the product side.
The space between the seal on the product
side and the seal on the atmosphere side is
cleared by a connection "B" to the flare. The
pressure differential to be sealed by the seal
on the atmosphere side equals the flare pres-
sure, so the leakage to the atmosphere side
or to the vent is very low. If the main seal
fails, the second seal acts as a safety seal.
E A G L E B U R G M A N N D R Y G A S S E A L S
Data and facts for the efficiency
of your compressors.
1 Seal face, stationary
2 Seat, rotating
3 Thrust ring
4 Spring
5 Shaft sleeve and seat retainer
6 Housing (adapted in size to the
installation space)
7 CSR radial clearance seal
8 Labyrinth
A Product flushing
B Flare
C Buffer gas
D Separating gas
S Vent
(Standard seal fitted
with O-rings as secon-
dary seals)
dN = 25 ... 380 mm
0.984" ... 14.961"
p1 = 1 ... 120 bar a
15 ... 1,740 PSI
t = –30 ... +200 °C
–22 ... 392 °F
vg = ... 200 m/s
... 656 ft/s
Operating range
DescriptionItem
d 2 d H
d s1
l3 lB
DGS
tandem seal with
intermediate labyrinth
Application: Where product leakages to the
atmosphere as well as buffer gas leakages to
the product are inadmissible, e.g. on H2,
ethylene or propylene compressors.
With this version the product pressure to be
sealed is reduced via the seal on the product
side. The entire process gas leakage is
discharged via connection "B" to the flare.
The seal on the atmosphere side is pressuri-
zed with buffer gas (nitrogen) via connection
"C". The pressure of the buffer gas ensures
that a current flows via the labyrinth to the
flare outlet.
DGS
double seal
Application: Where product leakages to the
atmosphere are inadmissible and tandem ar-
rangements are not suitable because of too
small product gas pressures. Buffer gas lea-
kages into the product must be admissible
(buffer pressure p3 > p1).
This seal is used when a neutral buffer gas of
suitable pressure is available but no flare.
Typical applications are to be found mainly in
the chemical industry, e.g. on HC gas com-
pressors.
A buffer gas, e.g. nitrogen, is fed between
the seals via connection "C" at a higher pres-
sure than the product pressure. One part of
the buffer gas leakage escapes to the atmo-
sphere side and the other part to the product.
ds ds1 dn dH d1 d2 l1 l2 l3 lBmax. max. min. min. min. min. min. min.
29 25 40 53 93 97 40 73 81 3135 31 46 60 99 103 40 73 81 3138 34 49 62 102 106 40 73 81 3145 41 56 70 111 115 40 73 81 3152 47 63 77 118 122 40 73 81 3157 52 68 84 129 133 40 73 81 3163 58 73 89 134 138 48 89 98 3168 63 78 94 139 143 48 89 98 3173 68 83 99 144 148 48 89 98 3178 73 88 104 149 153 51 96 105 3183 78 93 109 155 159 51 96 105 3188 83 98 114 161 165 51 96 105 3193 88 103 119 165 169 51 96 105 3198 93 108 124 170 174 51 96 105 31103 98 113 129 175 179 51 96 105 31108 103 118 134 180 184 51 96 105 31113 108 123 139 185 189 53 99 108 31120 114 130 151 197 201 53 99 108 31125 119 135 156 202 206 56 99 113 31
ds ds1 dn dH d1 d2 l1 l2 l3 lBmax. max. min. min. min. min. min. min.
130 124 140 161 207 211 56 99 113 31135 129 145 166 212 216 56 99 113 31139 133 150 171 223 227 56 99 113 31144 138 155 176 228 232 56 99 113 31148 143 160 181 233 237 60 109 121 32153 148 165 186 238 242 60 109 121 32158 153 170 191 243 247 60 109 121 32168 163 180 201 253 257 60 109 121 32178 173 190 211 263 267 64 118 131 37187 183 200 221 273 277 64 118 131 37197 193 210 231 283 287 67 120 136 37207 203 220 241 293 297 72 129 146 37217 213 230 251 303 307 72 129 146 37224 219 240 261 313 317 72 129 146 38234 229 250 271 323 335 77 138 156 38244 239 260 282 339 351 82 145 165 38254 249 270 292 349 361 82 145 165 38264 259 280 302 359 371 87 154 175 40
9
The MDGS – our answer to heavy duty
operating conditions with
shocks and vibrations.
E A G L E B U R G M A N N D R Y G A S S E A L S
EagleBurgmann MDGS is a gas-lubricated mechanical
seal, which is optimal for the sealing of high-speed
geared compressors and screw compressors which
require tight installation spaces and vibration resistance.
A face material combination of metal for the rotary ring
and carbon graphite for the stationary ring makes the
MDGS extremely insensitive to axial shocks.
Even a temporary contact between the seal faces is
no risk.
d1 = ..... 250 mm
... 9.843"
p = ... 50 bar a
... 725 PSI
t = –30 ... +200
–22 ... 392 °F
vg = ... 200 m/s
... 656 ft/s
EagleBurgmann MDGS in sub cartridge
design
1 . Metal seat, rotating with TiN special
coating and proven bi-directional U-grooves
2. Carbon seal face, stationary, in high-per-
formance design for maximum reliability
Operating range
11
Outstanding features
The most significant differences between
the MDGS and Burgmann’s DGS series of
service-proven gas seals are to be found in
the choice of material and the design of the
seal faces. Most particularly, titanium nitri-
de coating by the dynamic ion beam mixing
method (DM-TiN) is applied to the sealing
surfaces of the metallic mating ring
(Standard: 1 .4006/SU410). DM-TiN film
made by this method has superior micro
hardness and adhesion to film coated by
other processes. (Japan pat. no. 2134661).
What makes this coating so special, howe-
ver, is that it is not only applied to the sur-
face. Rather, a special process helps the
coating material to penetrate far into the
metal, thus creating an intensive bond that
withstands even the highest mechanical and
thermal loads. In addition, friction coeffi-
cient of DM-TiN against carbon graphite is
low, which enables the MDGS to exhibit ex-
cellent sliding characteristics even in dry
contact situations observed at start and stop
during turning respectively slow roll operati-
ons.
Capable and versatile
The MDGS is the ideal seal up to 50 bar a
(725 PSI) for geared compressors and
screw compressors. It can be configured as
a single, double and tandem seal (with or
without an internal labyrinth). Combinations
with an inboard labyrinth or a carbon ring
throttle and service-proven bearing seals
are possible. As a component seal the MDGS
is also a cost-efficient alternative for a
distinctly higher level of efficiency, for ex-
ample compared to labyrinths, radial carbon
ring seals and brush seals for air compres-
sors.
MDGS cartridge in
tandem arrange-
ment with interme-
diate labyrinth.
Cold start-up or hot operation –
our radial clearance seals perform lowest leakage rates.
Our radial clearance seals, the aerodynamic CSR and the
aerostatic CSE, are genuine alternatives to labyrinth
seals and some shaft seals. Their main advantages
include low gas consumption and leakage rates which
are up to 90% lower than labyrinth seals. The seals are
ideal for extreme operating conditions, and they are very
compact. The heavy-duty segmented carbon graphite ring
is held by a circular spring. These non-contact seals are
wear-free. They feature excellent running characteristics
in emergency conditions, for example when the machine
has to be shut down due to a malfunction, and the
hardened facings made of materials like tungsten
carbide provide good wear resistance during start/stop
operation. The CSR and CSE are supplied as cartridge
units which are ready for installation.
DN = 17 ... 320 mm (0.669'' ... 12.598")
Pressure
CSR: p2 dyn. 1 ,5 ... 2,2 bar a (21 ... 31 PSI)
p2 stat. ... 11 bar a (159 PSI)
CSE: min. 3 bar (43 PSI) a barrier gas supply
pressure
... 10 bar (145 PSI) a design pressure
vg = 10 ... 200 m/s (32 ... 656 ft/s) (CSR)
= 0 ... 120 m/s (393 ft/s) (CSE)
t = –20 ... +200 °C (–4 ... 392 °F) (CSR)
= –20 ... +120 °C (248 °F) (CSE)
Barrier gas
= Air or nitrogen
Dew point of barrier gas at operating
pressure
= –50 ... +20 °C (–58 ... 68 °F) (CSR)
= no limitation (CSE)s
Run-out of shaft
= max. 20 µm
Vibrations peak/peak
(in the area of compressor bearing)
Smax = 3.5 * 25.4 √12.000/nmax
Smax = 275 µm (short term)
Aerostatic CSE
The operating gap on the aerostatic CSE is
designed to match the expected operating
temperature in each respective application.
It runs with a defined gap which forms at the
specified operating temperature. The CSE is
used on applications with sliding velocities
below 10 m/s and a dew point below –50 °C.
The gas consumption is defined for each spe-
cific application.
PCVPIF0
DN
Operating range
E A G L E B U R G M A N N D R Y G A S S E A L S
1400
1200
1000
800
400
600
200
050 100 150 200 250 300 350 400
Nominal s ize DN (mm)
Gas
con
sum
ptio
n V
I (N
l/m
in)
Aerodynamic CSR
The pockets machined into the interior sur-
face of the segmented carbon ring on the
CSR generate radial lift-off when the machi-
ne is operating, automatically creating a
small concentric gap of a few micrometers.
When the machine is not running, the seal
and shaft are in contact and providing good
static sealing.
Compressor (Nuovo
Pignone) on the Njord
offshore platform
(Norsk Hydro) with a
Burgmann DGS9/130
gas seal (tandem arran-
gement) and a CSR.
p1 = 26 ... 48 bar a
n = 12,495 min-1
Medium: natural gas
PI PCV
DN
Inside the CSR-U
which is designed
for bi-directional
operation (gas in).
CSR segment seal in
double arrangement
with buffer gas
pressurization.
Interlocking plug-ty-
pe connection with
radial and axial sea-
ling properties.
13
Our SMS seal management systems:
Modular in design for individuality, functionality
and efficiency.
E A G L E B U R G M A N N D R Y G A S S E A L S
Ammonia compres-
sor (Sulzer Turbo)
at Norsk Hydro,
Trinidad. The com-
pressor system
was equipped with
a bi-directional
DGS in tandem
arrangement with
internal interme-
diate labyrinth and
a Burgmann buffer
gas system.
dN = 100 mm;
p = 4,7 bara,
n = 15,850 min-1
Burgmann SMS seal management systems are
designed to ensure the reliable operation of
gas-lubricated compressor seals. They are individually
assembled in accordance with the type of seal used
and in harmony with legal regulations and the
owner-user's individual safety aspects. Adaptation is
simplified by a modular design based on modules for
the flushing gas, buffer gas, leakage discharge and
separating gas.
15
SMS Seal Management System
Today, more than 80 % of all process machi-
nes in turbo compressor construction are
equipped with gas seal systems comprising
a gas-lubricated seal and a control system.
The seal is buffered with clean and dry flus-
hing/buffer gas to ensure reliable operation.
Volumes of leaking gas are monitored, and
discharged in a controlled manner. The
System can be adapted individually accor-
ding to the operating conditions and the sa-
fety requirements of the application.
The SMS performs the following functions:
• Clean gas module:
Supply of flushing gas
• Buffer gas module:
Supply of buffer gas (N2)
• Leakage module:
Monitoring of leakage
• Separation gas module:
Supply of separation gas (N2 or air)
Monitoring of buffer seal
Operating principle
To prevent soiling of the sliding faces, gas is
drawn from a higher pressure stage of the
compressor, is filtered and injected onto the
gas seal as clean "flushing gas". The leaka-
ge from the first gas seal stage is dischar-
ged to the flare for disposal. To prevent bea-
ring oil from contaminating the gas seal, a
further nitrogen or air buffer ("separating
gas") is provided between the bearing and
the gas seal.
Example of a gas
supply system with
differential pressu-
re control for a
tandem gas seal
with intermediate
labyrinths.
SMS as
a cabinet.
Global EagleBurgmann TotalSealCareTM service
makes sure you don't get left in the rain -
wherever you are.
E A G L E B U R G M A N N D R Y G A S S E A L S
When you decide in favor of a DGS from
EagleBurgmann you can expect to receive more than
just hardware and high tech. As one of the leading
manufacturers of seals, we are ready to serve you in
word and deed in all times and throughout the world.
Our specialists are constantly on duty to meet your
needs - be it assembly or start-up, repair or fault
analysis, after sales service or environmental-friendly
solutions. And you can count on a fast and efficient
response, because when we speak of customer
proximity you can take us at our word. We have service
centers, for example, which are equipped with test
systems specially for DGS compressor seals. Give us a
call or visit us on the internet: www.eagleburgmann.com.
Our research and development -
tradition of progress.
Our focus is firmly on finding and creating interdiscipli-
nary solutions and meeting customer requirements. The
foundation for achieving these objectives lies in sound
basic knowledge, a wealth of experience and, above all ,
the possibility to convert ideas to reality - from the test
phase right to readiness for production.
Performance test rigs for
compressor gas seals
Compressors at Alinta natural gas pipeline facilities in Western
Australia. Manufacturer: GE Oil & Gas (Nuovo Pignone), equipped with
Burgmann DGS6/180-TA2-L/R. dw = 160 mm, p1= 61 ... 86 bar,
n = 8.295 min-1, Start-up 1997.
Pressure profile
in the sealing
gap of a
DGS
Gas film thickness
in the sealing gap
of a DGS
EagleBurgmann in your vicinity
DG
SE /
E9
/ 2.
000
/ 08
.09
/ 7.
2.1
© E
agle
Bur
gman
n M
arke
ting
Com
mun
icat
ions
Ger
man
y
Burgmann IndustriesGmbH & Co. KG
Äußere Sauerlacher Str. 6–10D-82515 WolfratshausenPhone +49(0)8171/ 23-0Telefax +49(0)8171/ 23-1214www.eagleburgmann.com
Argentina EagleBurgmann ArgentinaCatalina M. de Boyle, 3117 (Calle 28)San Martin - Buenos AiresPhone +54 11 47 54 63 50Fax +54 11 47 54 63 73
Chilicote S.A.Avda. Julio A. Roca 546C1067 ABN Buenos Aires, ArgentinaPhone +54 / 11 / 43 43 84 69Telefax +54 / 11 / 43 31 42 78
AustraliaEagleBurgmann Australia Pty. Ltd.16 Stennett Road, Ingleburn, NSW 2565Phone +61/ 2 / 96 05 64 44Telefax +61/ 2 / 98 29 69 58
AustriaEagleBurgmann Austria GmbHVogelweiderstraße 44 aA-5020 SalzburgPhone +43 / 662 / 82 57 01Telefax +43 / 662 / 82 57 03
BelarusMegakomserviceMinsk, 220051Esenin str. 130-13Phone +375 17 2776366Telefax +375 17 2776375
BelgiumEagleBurgmann Belgium B.V.B.A.Zagerijstraat 11B-2960 Sint-Job-in't-GoorPhone +32 / 3 / 6 33 99 44Telefax +32 / 3 / 6 33 99 49
BrazilEagleBurgmann do BrasilVedaçoes Industriais Ltda.Av. Sta. Izabel, 1721CEP - 13084-643 Barao GeraldoCaixa Postal 65 60Campinas - Sao PauloPhone +55 /19 / 37 49 97 40Telefax +55 /19 / 37 49 97 42
CanadaEagleBurgmann Canada Inc.8699 Escarpment Way, Units #9 & #10Milton, Ontario / Canada L9T 0J5Phone +1/ 905 / 693 87 82 Telefax +1/ 905 / 693 05 35
Nova Magnetics-Burgmann Ltd. One Research DriveDartmouth, Nova ScotiaCanada B2Y 4M9 Phone +1/ 902 / 465 66 25Telefax +1 / 902 / 465 66 29
ChileSelloTecno Ltda.Luis Thayer Ojeda No. 0130OF 806 Providencia SantiagoChilePhone +56 / 2 / 333 33 03Telefax +56 / 2 / 333 25 19
ChinaBurgmann Shanghai Ltd.No. 127-8 Wenjing RoadMinhang, ShanghaiPeople's Republic of ChinaPhone +86 / 21/ 64 62 05 50Telefax +86 / 21/ 64 30 02 19
Burgmann Dalian Ltd.No. 86 Liaohe East Road, DD Port116620 DalianPeople's Republic of ChinaPhone +86 / 411 8758 1000Telefax +86 / 411 8758 1418
EBI (Shanghai) Investment Management Co. Ltd.Room 205 B Cimic TowerNo. 1090 Centur y Ave. Pudong201120 ShanghaiPeople's Republic of ChinaPhone +86 21 58 36 15 99Telefax +86 21 58 35 48 38
ColombiaWilliam Tobon & Cia.Cr. 7 - 64 - 50 - Ext. 301 Santafé de BogotaPhone +57 / 1 / 211 76 75Telefax +57 / 1 / 211 76 75
Cyprus & LebanonTRCI Ltd.122, Limassol Ave. PO Box 243711703 Nicosia, CyprusPhone+357 22 42 79 80Telefax +357 22 42 30 21
Czech RepublicEagleBurgmann Czech s.r.o.Na Drahach 1364CZ-15600 Praha 5 ZbraslavPhone +420 / 2 / 57 92 05 05Telefax +420 / 2 / 57 92 05 08
KE-Burgmann Czech s.r.o.V Láznich 395CZ-254 01 Jilove u PrahyPhone +420 / 2 / 41 02 18 11Telefax +420 / 2 / 41 02 18 30
DenmarkKE-Burgmann A/SExpansion Joints DivisionPark Allé 34, DK-6600 VejenPhone +45 / 75 36 18 11Telefax +45 / 75 36 15 32
KE-Burgmann A/SSeals DivisionIndustrisvinget 1, DK-6600 VejenPhone +45 / 75 36 49 88Telefax +45 / 75 36 39 88
KE-Burgmann Bredan A/SOdinsvej 1, Box 129DK-6950 RingkobingPhone +45 / 96 74 28 00Telefax +45 / 97 32 36 31
EcuadorPetroconsultant S.A.Fco. de Goya 262Urb. Los Cipresses IIEl CondadoP.O. Box 17-17-1254, QuitoPhone +593 / 2 / 49 17 52Telefax +593 / 2 / 49 35 09
EgyptAlimex Alexandria Import Export258 Abdel Salam Aref Str.Louran - El SarayAlexandria POB 313Phone +20 / 3 / 5 81 00 60Telefax+20 / 3 / 5 81 00 65
FinlandKE-Burgmann Finland OyExpansion JointsP.O. Box 139, Ensimmäinen SavuSF-01510 VantaaPhone +358 / 9 / 82 55 01Telefax +358 / 9 / 82 55 02 00
Tiivistetekniikka OyMäkituvantie 5, SF-01510 VantaaPhone +358 / 207 65 171Telefax +359 / 207 65 20 07
FranceEagleBurgmann France SASZone d’Activité les Perriers106/108 Route de CormeillesBP 96, F-78505 SartrouvillePhone +33 / 1/ 30 86 50 20Telefax +33 /1/ 39 15 16 07
GermanyBurgmann Industr iesGmbH & Co. KGÄußere Sauerlacher Str. 6–10D-82515 WolfratshausenPhone +49(0)8171/ 23-0Telefax +49(0)8171/ 23-1214
Espey Burgmann GmbHThomas-Edison-Str. 19D-47445 MoersPhone +49 / 2841 / 99827-0Telefax +49 / 2841 / 99827-55
Great BritainEagleBurgmann Industries UK LP12, Welton RoadWedgnock Industrial EstateGB-Warwick CV 34 5PZPhone +44 /1926 / 41 76 00Telefax +44 /1926 / 41 76 17
KE-Burgmann U.K.Eaton Bank, CongletonGB-Cheshire SW12 1NZPhone + 44 / 1260 / 29 12 89Telefax + 44 / 1260 / 29 13 03
GreeceA.G. Stambolidis & Co.Mitrodorou 22GR-10441 AthenPhone +30 /21/ 05 15 06 65Telefax +30 /21/ 05 15 08 10
HungaryEagleBurgmann Hungaria Kft.Lejtö utca 6H-1124 BudapestPhone +36 /1/ 3 19 81 31Telefax +36 /1/ 3 19 81 25
IndiaEagleBurgmann India Pv t . Ltd.Headquar tersNo.85, 3rd Floor, 1st AvenueAshok Nagar (Near Ashok Pillar)Chennai 600 083Phone +91 / 44 / 23712204, 23712205, 42020649Telefax +91 / 44 / 23712206
KE-Burgmann Flexibles India Pvt. Ltd. Survey No. 1426Nagappa Industrial Estate,194 G.N.T. Road, PuzhalChennai 600 066 , IndiaPhone +91 / 44 / 6 59 06 32Telefax +91 / 44 / 6 59 09 17
IndonesiaPT EagleBurgmann IndonesiaJl. Jababeka Blok J6-EKawasan Industri CikarangBekasi 17550 - Jawa BaratPhone +62 / 21/ 8 93 53 13 Telefax +62 / 21/ 8 93 53 15
IrakWTEUkba Sq., Mahala 929Zuhak 2, House No. 5P.O. Box No. 2421Al Jadria, BaghdadPhone +964 171 99033Telefax +964 171 93034
IranBurgmann Pars Sealing Systems Co.No. 1, Kokab Alley, Pasdaran Ave.TeheranPhone +98 / 21/ 2 86 28 19Telefax +98 / 21/ 2 85 44 81 IsraelETA Engineering Ltd.P.O. Box 890Ramat-Gan 5210818 Tushia St.Phone +972 / 3 / 6 24 19 45Telefax +972 / 3 / 5 62 84 75
ItalyEagleBurgmann Italia s.r.l.V iale Mar tir i della Liberazione, 12I-23875 Osnago (LC)Phone ++39.(0)39.9522501Telefax ++39.(0)39.58362
BT-Burgmann S.P.A.Via Meucci, 58I-36057 Arcugnano (Vi)Phone +39 / 0444 / 28 89 77Telefax +39 / 0444 / 28 86 93
JapanEagle Industry Co., Ltd.General Industry Overseas Sales Dept.Marketing & Sales Division1-12-15, Shiba-Daimon, Minato-kuTokyo, 105-8587Phone +81/ 3 / 3432-4771 Telefax +81/ 3 / 3438-2370
EagleBurgmann Japan Co., Ltd.Global Marketing and Sales Division1-12-15, Shiba-Daimon, Minato-ku,Tokyo, 105-8587Phone +81/3/3432-4771Telefax +81/3/3438-2370
JordanEman Essa Trading Est.P.O. Box 840067Amman 11180 Phone +96 / 279 / 5 57 66 92Telefax +96 / 265 / 66 55 96
KazachstanVector 7Raimbek Str. 496A, 302 Room050031 AlmatyKasachstanPhone +7 / 727 / 327 00 52Telefax +7 / 727 / 276 26 37
KoreaEagleBurgmann Korea 376-4, Gajang-Dong, Osan-Si, Gyeonggi-Do, Korea 447210Tel. +82 / 31 / 375-40 95Fax +82 / 31 / 375-40 92Branch Of fices: Ulsan
KuwaitEagleBurgmann Middle East Sales & Service Center / HOV General Trading & Contracting Co. WLLP.O Box : 3689224758 Al Rass, KuwaitPhone +965 / 326 03 35Mobilphone +965 / 908 41 54
LibyaUnited Technical & Engineering Miseran St.P.O. Box 81276 Tripoli G.S.P.L.A .J.Phone +218 21 4442 641 Telefax +218 21 4776 152
LithuaniaDmitri MelnikowBalandziu 5 - 2LT-91188 KlaipedaPhone / Fax +370 46 31 29 49Mobile +370 69 82 14 27
MalaysiaEagleBurgmann (Malaysia) Sdn. Bhd.No. 7, Lorong SS13, 6 BOff Jalan SS13/6Subang Jaya Industrial Estate47500 Petaling JayaPhone +60 / 3 / 56 34 86 24Telefax +60 / 3 / 56 34 97 42
MexicoEagleBurgmann Mexico S.A. de C.V.Calzada de GuadalupeNum. 350-6, Col. El CerritoC.P. 54720, Cuautitlán Izcalli,Estado de México, Mexico CityPhone +52 / 55 / 58 72 53 93Telefax +52 / 55 / 58 72 64 93
MoroccoPetro-MatAngle Rue Michel de l'Hôpitalet Rue Jules CesarCasablanca 05Phone +212 / 240 / 87 99 Telefax +212 / 240 /19 39
NetherlandsEagleBurgmann Netherlands B.V.Koningsschot 9NL-3905 PP VeenendaalPhone +31/ 318 / 54 20 00Telefax +31/ 318 / 54 15 35
New ZealandEagleBurgmann New Zealand Ltd.P.O. Box 34285, Birkenhead, 3 Parit y Place, Glenfield, AucklandPhone +64 / 9 / 4 43 57 72Telefax +64 / 9 / 4 41 27 66
NigeriaSealing Engineering Services Ltd.82 St. Finbarr's College RoadAkoka / Yaba, LagosPhone +234 /1/ 82 59 09Telefax +234 /1/ 82 59 09
NorwayEagleBurgmann Norway ASP.O. Box 143 Industr iveien 25 DN-2021 SkedsmokorsetPhone +47 / 64 / 83 75 50Telefax +47 / 64 / 83 75 75
OmanOverseas PetroleumEquipment Co. L.L.C.P.O. Box 261, HamriyaPostal Code 131, Sultanate of OmanPhone +968 / 60 21 82Telefax +968 / 60 20 84
PakistanAzif Asim AssociatesSuit #02, 1st Floor, Sameer plaza Civic Center, 3-C1Faisal Town54660 Lahore, PakistanPhone +92 / 42 / 111 585Telefax +92 / 42 / 516 83 44
Techno-Mech Pakistan51-A/1, Rehmanpura, Ferozpur Road 54660 Lahore, PakistanPhone +92 / 42 / 757 5671Telefax +92 / 42 / 759 7373
PeruCorporación Gamma S.A.C.Av. La Marina 1321, San MiguelLima - PeruPhone +51/12 / 63 76 70Telefax +51/12 / 63 02 86
PhilippinesEagleBurgmann Philippines Inc.No. 9769 National Road, MaduyaCarmona, Cavite Phone +63 / 49 / 8 39 06 55Telefax +63 / 49 / 8 39 06 54
PolandKE-Burgmann Polska Spólka z.o.o.Al. Jerozolimskie 200PL-02-486 WarszawaPhone +48 22 535 16 00Telefax +48 22 535 16 48
PortugalEagleBurgmann Ibérica S.A.Avda. de Quitapesares, 40E-28670 Villaviciosa de Odón, MadridPhone +34-91-616 66 01Telefax +34-91-616 66 81
QatarJaidah Motors and Trading Co.P.O.Box 150 Doha / Qatar / Arabian GulfPhone +974 / 68 21 82Telefax +974 / 41 41 00
RomaniaEagleBurgmann RO S.R.L.Bdul. Iuliu Maniu, Nr. 7 Cladirea E, Par ter, Hala 3, SectorRO-061072 BucurestiPhone +40 / 314 25 09 09Telefax +40 / 314 25 09 10
RussiaEagleBurgmann OOO ul. Zheleznodorozhnaya, 1, str. 45 606524 Zavolzhye Gorodetsky distr ict , Nizhny Novgorod region Phone +7 83161 30077 Telefax +7 83161 30559
Moscow Representation Ul. Novotcheremuschkinskaja 61RF-117418 MoskauPhone +7 / 095 / 7 97 20 14 Telefax +7 / 095 / 7 97 20 78
Saudi ArabiaEagleBurgmann Saudi Arabia LimitedPO box no. 3422, Dammam Port RoadDammam, Saudi ArabiaPhone +96 / 63 / 8 59 91 19Telefax +96 / 63 / 8 59 92 29
Gas Arabian Services EstP.O.Box 3422 Dammam 31471, King Saud StreetKingdom of Saudi ArabiaPhone +96 / 63 / 8 35 15 00Telefax +96 / 63 / 8 32 28 22
SingaporeEagleBurgmann Singapore Pte. Ltd.52 Serangoon Nor th Avenue 4, #03-02 Ever Tech Building555853 Singapore Phone +65 / 64 81 34 39Telefax +65 / 64 81 39 34
EBI Asia Pacific Pte. Ltd.29 International Business Park , Acer Blg, Tower B, #03-03609923 SingaporePhone+65 / 65 65 66 23 Telefax +65 / 65 65 96 63
KE-Burgmann Singapore Pte. Ltd.Expansion JointsBlk 7 Pioneer Road NorthNo. 01-51, Singapore 628459Phone +65 / 62 61 85 81 Telefax +65 / 62 61 85 89
Slovenia (CRO, BIH, MAC, YU)Branch Office SloveniaMalci Beliceve 37SLO-1000 LjubljanaPhone +386 / 1/ 4 23 15 57Telefax +386 / 1 / 2 57 40 57Mobile +386 / 41 / 66 13 15
Slowakian RepublicEagleBurgmann Czech s.r.o.Na Drahach 1364CZ-15600 Praha 5 ZbraslavPhone +420 / 2 / 57 92 05 05Telefax +420 / 2 / 57 92 05 08
Technosam s.r.o.Galvaniho 2/ASK-82104 BratislavaPhone +421 / 2 / 43 41 35 85Telefax +421 / 2 / 43 41 36 03
South AfricaEagleBurgmann SealsSouth Africa (PTY.) LTD.1 Brunton CircleFounders View South, ModderfonteinJohannesburg 2065, Gauteng, R.S.A.Phone +27 /11/ 4 57 90 00Telefax +27 /11/ 6 09 16 06Postal adress: P.O. Box 1210, Edenva-le 1610, R.S.A.Also responsible for: Namibia, Bots-wana, Swaziland, Zambia, Zimbabwe, Mozambique, Mauritius, Congo, Ethiopia, Uganda, Tanzania
SpainEagleBurgmann Ibérica S.A.Avda. de Quitapesares, 40E-28670 Villaviciosa de Odón, MadridPhone +34-91-616 66 01Telefax +34-91-616 66 81
SwedenEagleBurgmann Sweden AB Svärmaregatan 3 S-60361 NorrköpingPhone +46 /11 /14 00 05Telefax +46 /11 /14 00 15
EagleBurgmann Sweden ABGöteborg Of f iceAskims Verkstadsväg 4S-436 34 Askim, GöteborgPhone +46 / 31 / 58 68 50Telefax +46 / 31 / 58 14 66Postal adress:Box 9101, 40093 Göteborg
SwitzerlandEagleBurgmann (Switzerland) AGHofstrasse 21, CH-8181 HöriPhone +41 / 44 / 8 60 88 00Telefax +41/ 44 / 8 61 01 35
TaiwanEagleBurgmann Taiwan Co. Ltd.1F No. 7, Lane 144 Chi Lin Rd.TaipeiTaiwan, R.O.C.Phone +886 -2- 2581 0040Telefax +886 -2- 2523 2793
ThailandEagleBurgmann (Thailand) Co. Ltd.Banga Tower C, Floor 18th40/14 Moo 12 Banga-Trad Rd.Km. 6.5 Bangkaew, BangpleeSamutprakarn 10540 Phone +66 / 2 / 7 51 96 21Telefax +66 / 2 / 7 51 96 28
TrinidadEswil Equipment & Supply(W.I.) Ltd10 - 16 Lady Hailes AvenueSan Fernando, Trinidad, W. I.P.O. Box 3585, La RomaineTrinidad, W. I.Phone +1/ 868 / 6 57 88 38Telefax +1/ 868 / 6 52 90 02
TunisiaIndus Serv S.A.R.L69 Rue Houcine BouzaieneApt. N°4, 2 éme Etage1001 Tunis Phone +216 / 71/ 337 215Telefax +216 / 71/ 337 214
TurkeyEagleBurgmannEndüstryiel Sızdırmazlık San. Ve Tic. Ltd. Sti.S.S. Ístanbul Kimya Sanayiciler Toplu Íşyeri Yapı Kooperatifi E Blok No. 4TR-81720 Tepeören-Tuzla/IstanbulPhone +90 / 216 / 5 93 02 93Telefax +90 / 216 / 5 93 02 98
TurkmenistanEWIS Services AGAndaliba Street 82744011 AshgabatTurkmenistanPhone +993 / 12 / 39 72 55Telefax +993 / 12 / 39 72 58
UkraineIRT-TechnogermUl. Komsomolskaja, 13040009 SumyPhone +380 542 610 324Telefax +380 542 610 326
United Arab EmiratesEagleBurgmann Middle East FZEP.O. Box 61310Jebel Ali Free ZoneDubaiPhone +971/ 4 / 8 83 88 41Telefax +971/ 4 / 8 83 88 43
UruguayBilpa S.A.Casilla Correo 889Código Postal 11800Santa Fé, 1.131 - Montevidéo- UYPhone +598 / 2 / 29 33 43Telefax +598 / 2 / 29 06 87
USAEagleBurgmann Industries LP10035 Brookriver Dr. Houston, Texas 77040Phone +1/ 713 / 9 39 95 15Telefax +1/ 713 / 9 39 90 91
KE-Burgmann USA Inc. 2100 Conner RoadHebron, Kentucky 41018Phone +1 / 859 / 746 0091Telefax +1 / 859 / 746 0094
UsbekistanEWIS Services AGAndaliba Street 82744011 AshgabatTurkmenistanPhone +993 / 12 / 39 72 55Telefax +993 / 12 / 39 72 58
VenezuelaEagleBurgmann Venezuela, C. A .Calle 6 con Calle 9, Edif. Fant Piso 2 Zona Industr ial La Urbina1070 CaracasPhone +58 / 212 / 2 42 15 48Telefax +58 / 212 / 2 42 45 44
VietnamEagleBurgmann Vietnam Company Ltd.7th Floor, Me Linh Point TowerUnit 717B, 2 Ngo Duc Ke Street, District 1, Ho Chi Minh City, VietnamPhone +84 / 8 / 520 2812 / 823 7850 Telefax +84 / 8 / 823 7840