Upload
vodieu
View
222
Download
1
Embed Size (px)
Citation preview
NE1A / DST1Devicenet Safety System
Omron now offers a Devicenet compatibleSafety System, that can be used 3-ways:as a Stand-alone controller, as a Safetynetwork expandable with remote I/O blocks, orcombined with Devicenet to form a combined Network
- Conforms to Global Safety Standards- Individual I/O LED status and error indicators- USB Programming Port- IEC 61508 SIL 3- EN954-1 Category 4- UL1604 Class 1, Div. 2 Group A,B,C,D
Product Information
#-# Devicenet Safety System
Introducing a Safety Network System that dramatically alters previous safety design.
Programmable safety circuits are incorporated to facilitate efficient designing and
modifications. Moreover, Safety I/O Terminals can be added to increase safety I/O capacity
for distributed allocation through the network. DeviceNet wiring on the existing network can
be used as is, facilitating efficient design by expanding on the existing system.
The programmability of safety circuits, expandability of I/O using the network, and
compatibility with the DeviceNet open network effects major changes to the framework of
previous safety design systems.
Safety Devicenet System #-#
Complies with the Highest Safety Standards in the World
IEC 61508 SIL 3Safety circuits must be able to function to provide safety at
anytime. Conversely, the degree of lack of safety is used as the
indicator. In IEC 61508, safety is defined as the Probability of
Failure per Hour, or PFH. Based on this, the SIL (Safety Level)
is classified into four levels. SIL 3 indicates a probability of
dangerous failure of once in 1,000 years, which is the highest
level in machine safety.
EN 954-1 Safety Category 4EN standards evaluate the level of machine risk and require
the incorporation of risk minimization measures. In EN 954-1,
five safety categories have been established, with Safety
Category 4 indicating designs that require the highest safety
design level. This category is demanded for machines with the
highest level of danger, wherein "serious injury (severed limbs,
death, etc.) will occur frequently, with little chance of escaping
danger." This category demands that a single fault (failure) in
any part of the machine, or a series of faults, will not lead to
loss of the machine's safety functions.
The DeviceNet Safety System conforms to IEC 61508 SIL3 for functional safety, and EN 954-1 Category 4 for machine safety, complying with the world's highest level of safety standards.
NE1A-SCPU01 Safety Network Controller
DST1-series Safety I/O Terminals
WS02-CFSC1-E Safety Network Configurator
DeviceNet Safety System
Network Configurator FunctionsIncludes previous DeviceNet Configurator functions.Performs setup for the DeviceNet Safety network configuration.
Programming FunctionsI/O configuration functions for Safety Network Controllers and Safety I/O Terminals.Programming functions for safety circuits.Monitor programs.
Programmable Safety ControlIncorporates 16 safety inputs and 8 safety outputs. Functions as a compact safety PLC even without using a network. Construct safety circuits easily with special Function Blocks. Up to 128 Function Blocks can be used.
DeviceNet Safety Communications FunctionsProvides DeviceNet Safety Master functionality. Connect up to 16 Safety Slaves. Expand using up to sixteen Input Slaves with 12 points each (192 points total) and eight I/O Slaves with 16 points each (128 points total). Safety Slave functionality is also included. Interlock control can be incorporated between Safety Network Controllers.
DeviceNet Slave FunctionalityMonitor safety I/O and status information from the DeviceNet Master.
Safety Input and Safety I/O Models AvailableSafety inputs: 12-point model (DST1-ID12SL-1)Safety I/O: 8-point/8-point model (DST1-MD16SL-1)Safety I/O: 4-point/4-point (relay outputs) model (DST1-MRD08SL-1)
DeviceNet Slave FunctionalitySafety I/O and status information can be allocated as a DeviceNet Slave.Maintenance functions are provided for measuring the number of operations or the operating time for safety devices.
Easy WiringSuperior construction and preventive maintenance using clamp connectors.
Safety Devicenet System #-#
Stand-Alone Programmable Controller
Programmable Safety Circuits
Until now, safety design involved combining safety relays to configure safety control circuits. This process involved
tedious wiring, and moreover, any changes required direct modification of the wiring. The DeviceNet Safety System
uses programmable safety circuits, dramatically improving the ease of design and modification.
System Configuration 1
I/O Response Using Small Number of Points NE1A-SCPU01 WS02-CFSC1-E
Configuration Example for High-speed Safety
��
Safety Door Switch
NE1A-SCPU01 Safety Network Controller
ContactorEmergency Stop Pushbutton Switch
WS02-CFSC1-E Safety Network Configurator
USB
Delivers high-speed I/O response in a single Unit with up to 16 safety inputs and 8 safety outputs.
Emergency Stop Pushbutton Switch
Safety Door Switch
MotorMotor
USB
Previous Safety Control Circuits
Emergency Stop Pushbutton Switch
Safety Door Switch Safety Relay
Unit
Safety Network Controller
Safety Relay Unit
Safety Relay Unit
Contactor
Contactor
Contactor Contactor
Safety Network Configurator
Safety logic operations can be programmed using Function Blocks.
Programmable Safety Circuits
Safety Devicenet System #-#
Safety Network
Safety components distributed over many different installation locations required long and complicated wiring.
Replacing the wiring with a network between safety components greatly improves productivity.
Expand Safety I/O Through Networks
System Configuration 2
Distributed Hazard Sources NE1A-SCPU01 DST1 Series WS02-CFSC1-E
By using Safety I/O Terminals, safety I/O can be expanded easily through the network.
Expand a Safety Network Controller using up to sixteen Input Slaves with 12 points each (192 points total), and up to eight I/O Slaves with 16 points each (128 points total).
Emergency Stop Pushbutton Switch
Safety Door Switch
Safety Light Curtain
Safety Light Curtain
Safety Door Switch
Previous Machine Connections Connecting Devices Using DeviceNet Safety
Safety control
Safety Network Controller
Safety Network Controller
ContactorContactor Contactor
ContactorContactor Emergency Stop Pushbutton Switch
Contactor
Safety I/O Terminal
Safety I/O Terminal
Safety I/O Terminal
Example of Safety I/O Configuration for
���
USB
Distributed allocation of safety I/O devices can be achieved easily using Safety I/O Terminals and the DeviceNet Safety Network.
NE1A-SCPU01 Safety Network Controller
NE1A-SCPU01 Safety Network Controller
WS02-CFSC1-E Safety Network Configurator
DST1-MRD08SL-1 Safety I/O Terminal
DST1-ID12SL-1 Safety I/O Terminal
DST1-MD16SL-1 Safety I/O Terminal
Devicenet Safety
Devicenet Safety
Safety Devicenet System #-#
Combined Safety / Devicenet Nework
System Configuration 3
System Configuration Example for Total Control of Machine Control and Safety Control� SYSMAC CJ Series� NE1A-SCPU01
DST1 Series WS02-CFSC1-E
The DeviceNet Network can be used to monitor the status of safety I/O and safety circuits on the DeviceNet Safety Network from existing DeviceNet Masters or other PLCs.
SYSMAC CJ-series PLC
Machine Control
Safety Control
DeviceNet Safety Master
NE1A-SCPU01 Safety Network Controller
DeviceNet Master
DeviceNet Safety Slave
DeviceNet
Remote I/O TerminalAnalog I/O Terminal
DST1-ID12SL-1 Safety I/O Terminal
DST1-MRD08SL-1 Safety I/O Terminal
DeviceNet Safety Master
USB
Safety Network Controller
Includes functions for improving maintenance.
Machine control
DeviceNet Master
DeviceNet Slave
SYSMAC CJ-series PLC
DeviceNet Safety Slave
Analog I/O Terminal
Safety control
Safety I/O Terminal
Safety I/O Terminal
Network system settings and Safety Network Controller programming.
NS-series Programmable Terminal
Safety Network Controller with Safety interface.
Incorporating DeviceNet Slave functionality. Monitor safety I/O and status information from the DeviceNet Master directly without requiring a gateway or other interface.
Linking machine control is indispensable for achieving total control. By linking to machine control data, safety control can
be monitored from the PLC, enabling the location of an error to be identified in an instant and improving maintenance.
DeviceNet Safety System utilizes the DeviceNet wiring from the existing network as is.
Compatible with the DeviceNet Open Network
Devicenet
DeviceNet Slave
Safety Devicenet System #-#
Ordering Information
Appearance Description Part Number
Appearance Description Part Number
Appearance Description Part Number
NE1A-SCPU01
DST1-ID12SL-1
DST1-MD16SL-1
DST1-MRD08SL-1
- 16 PNP Inputs- 8 PNP Outputs- 4 Test Outputs- 128 Function Block Programming- Removable Cage Clamps Terminals
- 12 PNP Inputs- 4 Test Outputs- Removable Cage Clamps Terminals
IP20 Safety I/O Terminals
Safety I/O Terminals
Software
Input Terminal
Mixed I/O Terminal
Mixed I/O Terminal
- 8 PNP Inputs- 8 PNP Outputs- 4 Test Outputs- Removable Cage Clamps Terminals
- 4 PNP Inputs- 4 relay Outputs (4 x 2-single pole)- 4 Test Outputs- Removable Cage Clamps Terminals
WS02-CFSC1-E(English Version)
Safety Network Configurator
- Installation Disk (CD-ROM)- IBM PC/AT Compatible- Windows 2000 or XP
Safety NetworkController
Safety Devicenet System #-#
Specifications
Safety Input Specifications
Safety Output Specifications
Test Output Specifications
General Specifications
Standards
Input type
ON voltage
OFF voltage
OFF current
Input current
Sinking inputs (PNP)
11 VDC min. between each input terminal and G1
5 VDC min. between each input terminal and G1
1 mA max.
4.5 mA
Output type
Rated output current
Residual voltage
Leakage current
Sourcing outputs (PNP)
0.5 A max. per output
1.2 V max. between each output terminal and V2
0.1 mA max.
Output type
Rated output current
Residual voltage
Leakage current
Note: Total simultaneous ON current: 1.4 A
Sourcing outputs (PNP)
0.7 A max. per output (See note.)
1.2 V max. between each output terminal and V1
0.1 mA max.
11 to 25 VDC (supplied from communications connector)
Unit power supply voltage20.4 to 26.4 VDC (24 VDC � 15% +10%)
I/O power supply voltage
Overvoltage category
Noise immunity
Consumption current
Communications power supplyInternal circuit power supply
24 VDC, 15 mA
24 VDC, 230 mA
Conforms to IEC 61131-2
Mounting method 35-mm DIN Track
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
� 10 to 55°C
II
10% to 95% (with no condensation)
� 40 to 70°C
Degree of protection
Vibration resistance
Shock resistance
IP20
Weight 460 g max.
10 to 57 Hz: 0.35 mm, 57 to 150 Hz: 50 m/s2
150 m/s2: 11 ms
Certifying body
TÜV Rheinland
UL
Standards
EN954-1:1996, EN60204-1:1997, EN61000-6-2:2001, EN61000-6-4:2001, EN418:1992, IEC61508 part1-7/12.98-05.00, IEC61131-2/02.03, NFPA 79-2002, ANSI RIA15.06-1999, ANSI B11.19-2003 UL1998 (pending), NFPA79 (pending), UL508, CSA22.2 No14, UL1604
DeviceNet communications power supply voltage
For details on operating precautions and other information required to use the product, be sure to read the following operation manual:DeviceNet Safety Network Controller Operation Manual (Z906)
NE1A-SCPU01
NOTE:
General Specifications
Safety Input Specifications
Safety Output Specifications
Test Output Specifications
Safety Output Specifications for Relay Outputs
StandardsInput type
ON voltage
OFF voltage
OFF current
Input current
Sinking inputs (PNP)
11 VDC min. between each input terminal and G1
5 VDC min. between each input terminal and G1
1 mA max.
6 mA
Output type
Rated output current
Residual voltage
Leakage current
Sourcing outputs (PNP)
0.5 A max. per output
1.2 V max. between each output terminal and V2
0.1 mA max.
Output type
Rated output current
Residual voltage
Leakage current
Sourcing outputs (PNP)
0.7 A max. per point
1.2 V max. between each output terminal and V1
0.1 mA max.
Relays
Minimum applicable load
Rated load for a resistive load
Rated load for an inductive load
Mechanical life expectancy
Electrical life expectancy
G7SA-2A2B, EN 50205 Class A
1 mA at 5 VDC
240 VAC: 2 A, 30 VDC: 2 A
2 A at 240 VAC (cos� =0.3),
1 A at 24 VDC
5,000,000 operations min. (switching frequency of 7,200 operations/h)
100,000 operations min. (at rated load and switching frequency of 1,800 operations/h)
DeviceNet communications power supply voltage
11 to 25 VDC (supplied from communications connector)
I/O power supply voltage
Overvoltage category
Noise immunity
20.4 to 26.4 VDC (24 VDC Š15% +10%)
Conforms to IEC 61131-2
Mounting method 35-mm DIN Track
Ambient operating temperature Š10 to 55°C
II
Ambient operating humidity
10% to 95% (with no condensation)DST1-MRD08SL-1: 10% to 85% (with no condensation)
Degree of protection
Vibration resistance
Shock resistance
Weight
IP20
Ambient storage temperature Š40 to 70°C
10 to 57 Hz: 0.35 mm, 57 to 150 Hz: 50 m/s2
DST1-ID12SL-1/MD16SL-1: 150 m/s2 11 msDST1-MRD08SL-1: 100 m/s2 11 ms
DST1-ID12SL-1/MD16SL-1: 420 gDST1-MRD08SL-1: 600 g
DST1-ID12SL-1/MD16SL-1: 100 mADST1-MRD08SL-1: 110 mA
Certifying body
TÜV Rheinland
UL
Standards
EN954-1/12.96, EN60204-1/12.97, EN61000-6-2/10.01, EN61000-6-4/10.01, EN418/1992, IEC61508 part1-7/12.98-05.00, IEC61131-2/02.03, NFPA 79-2002, ANSI RIA15.06-1999, ANSI B11.19-2003 UL1998, NFPA79, UL508, CSA22.2 No14, UL1604 (DST1-ID12SL-1 and DST1-MD16SL-1 only)
Consumption current
Communications power supply
For details on operating precautions and other information required to use the product, be sure to read the following operation manual:Devicenet Safety DST1-series Safety I/O Terminals Operation Manual (Z904)
DST1- SL-1
For details on operating precautions and other information required to use the product, be sure to read the following operation manual:DeviceNet Safety Network Controller Operation Manual (Z906)
Safety Devicenet System #-#
WS02-CFSC1-E
DeviceNet Safety
Standard PLC and Master
Safety I/O Terminal• Safety Slave functionality• Standard Slave functionality
Safety Network Controller• Safety Slave functionality• Standard Slave functionality
Safety Network Controller Safety Master
functionality Standard Slave
functionality
Safety Network Configurator
Safety configuration Standard configuration
Safety communicationsStandard communications
System Configuration
General Specifications
Compatible computer IBM PC/AT or compatible
CPU Pentium 300 MHz min.
Supported languages English
Memory 128 Mbytes min.
Hard disk 40 Mbytes min. available space
Monitor Display functionality of S-VGA monitor or higher
CD-ROM One CD-ROM drive min.
Communications port
Either of the following communications ports is required.• USB port: For online communications via SNC USB port (USB1.1)• DeviceNet Interface Card (3G8E2-DRM21-EV1): For online communications via DeviceNet.
OS Windows 2000 or XP
Note: Windows is a registered trademark of Microsoft. IBM is a registered trademark of International Business Machines Corp.
Standard Slave (Analog I/O Terminal)
Control and monitoring from a standard PLC Standard I/O communications Explicit message communications
Safety control using Safety Network Controller Safety I/O communications
Manuals
Reference NumberDescription
Z906
Z904
Z905
Devicenet Safety Network Controller Operation Manual
Devicenet Safety DST1-series Safety I/O Terminals Operation Manual
Devicenet Safety System Configuration Manual
Safety Devicenet System #-#
Internal Circuit Configuration
For details on operating precautions and other information required to use the product, be sure to read the following operation manual:DeviceNet Safety Network Controller Operation Manual (Z906)
NE1A-SCPU01
NOTE:
Safety I/O Terminals
V+CAN HDRAINCAN L
V�
D+D�
Dev
iceN
et
phys
ical
laye
rD
C-D
C c
onve
rter
(n
on-is
olat
ed)
DC
-DC
con
verte
r (is
olat
ed)
Saf
ety
inpu
t circ
uits
Tes
t inp
ut c
ircui
ts
Inte
rnal
Circ
uit
USB
24 VDC
24 VDC
V0
G0
V1
G1
T0
T3
IN0
IN15
Saf
ety
outp
ut c
ircui
ts
24 VDCV2
G2
LOUT0
LOUT7
DST1-ID12SL-1
DST1-MD16SL-1
DST1-MRD08SL-1
V+
CAN H
DRAIN
CAN L
VŠ
V+
CAN H
DRAIN
CAN L
VŠ
V+
CAN H
DRAIN
CAN L
VŠ
G G T0 T1 T0 T1 T0 T1 T0 T1 T0 T1 T0 T1 G G G G G G11 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 40
V
Physical layer
Input power supply circuits Safety input circuits Test output circuits
DC-DC converter (non-isolated)
V IN0 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 IN10 IN11 T2 T2 T2 T3 T3 T31 2 3 4 5 6 7 8 9 10 21 22 23 24 25 26 27 28 29 30
Internal circuits
G0 G0 T0 T1 T0 T1 T0 T1 T2 T3 G1 G1 G1 G1 G1 G1 G1 G1 G1 G111 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 40
V0
Physical layer
Input power supply circuits
Test output circuits
Output power supply circuits
Safety input circuits Safety output circuits
DC-DC converter (non-isolated)
V0 IN0 IN1 IN2 IN3 IN4 IN5 IN6 IN7 V1 V1 OUT0 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT71 2 3 4 5 6 7 8 9 10 21 22 23 24 25 26 27 28 29 30
Internal circuits
G0 G0 T0 T1 T0 T1 G0 G0 G0 G0 G1 G1 C0 C0e C1
Ry0 Ry1 Ry2 Ry2
C1e C2 C2e C3 C3e11 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 40
V0
Safety input circuits
V0 IN0 IN1 IN2 IN3 T2 T2 T3 T3 V1 V1 OUT0 OUT0 OUT1 OUT1 OUT2 OUT2 OUT3 OUT31 2 3 4 5 6 7 8 9 10 21 22 23 24 25 26 27 28 29 30
Internal circuits
Physical layer
DC-DC converter (non-isolated)
Output power supply circuits
Test output circuits
Input power supply circuits
Safety Devicenet System #-#
Wiring Diagrams
For details on operating precautions and other information required to use the product, be sure to read the following operation manual:DeviceNet Safety Network Controller Operation Manual (Z906)
NE1A-SCPU01
NOTE:
Safety I/O Terminals
�
Emergency Stop Switch and Reset � Safety Outputs � Safety Output and Output Feedback
V
G
IN0
12 22 S2
11
E1 E1 E1 E2
DST1-ID12SL-1
V1
G1
DST1-MD16SL-1
E1: 24-VDC Power Supply (e.g., S8VS)S1: Emergency stop pushbutton switch (direct operation mechanism)S2: Reset switch
E1: 24-VDC Power Supply (e.g., S8VS)L1 and L2: Loads
21
T0
IN1
T1
T2
G
IN11
T1
OUT1
G1
OUT0
G1
L1 L2
V0
G0
DST1-MRD08SL-1
E1: 24-VDC Power Supply (e.g., S8VS)KM1 and KM2: ContactorsF1 and F2: Fuses
IN0
T0
V1
G1
OUT0
C0
F1 F2KM1
KM2
OUT1
C1
KM1 KM2
S1
KM1
KM2
M
Emergency Stop Applications (Manual Reset)
KM1
KM1-NC
S2
KM2-NC
KM2
E1
E2E0
S1 12
11
22
21
+ �
+ �E0, E1, and E2: 24-VDC power supply (e.g., S8VS)S1: Emergency stop pushbutton switch (direct operation mechanism)S2: Reset switchKM1 and KM2: Contactors
OUT1 OUT3 OUT5 OUT7
KM2 KM1
OUT0 OUT2 OUT4 OUT6V1
V2
T2
T3
T0
T1
G1V0 G0
G2
M
IN0
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN8
IN9
IN10
IN11
IN12
IN13
IN14
IN15
+ �
Safety Devicenet System #-#
Dimensions
For details on operating precautions and other information required to use the product, be sure to read the following operation manual:DeviceNet Safety Network Controller Operation Manual (Z906)
NOTE:
�
(Unit: mm)
NE1A-SCPU01
90.4
(99) 111.1
24VDC
×10 ×1
ON
1
0
1
0
3
2
5
4
7
6
1
0
3
2
5
4
7
6
1
0
3
2
5
4
7
6
9
8
11
10
13
12
15
14
3
2
5
4
7
6
9
8
11
10
13
12
15
14
SAFETY NETWORK CONTROLLER
0 0
USB
NS
MS
LOCK
COMM
NE1A-SCPU01
NODE ADR
BAUD RATE
V0 G0
24VDC OUT
IN
V1 G1
V1 G2
T0 T2
T1 T3
V1 G1
V1 G2
T0 T2
T1 T3
V0 G0
1234
ON
(114.1)
131.4
DST1-ID12SL-1DST1-MD16SL-1
DST1-MRD08SL-1
65(68.15)
170
35.542.75
71.4
90(94.7)
170
35.5
63
83.2
Terms and Conditions of Sale1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,catalogs, manuals, brochures and other documents, whether electronic or inwriting, relating to the sale of products or services (collectively, the "Products")by Omron Electronics LLC and its subsidiary companies (“Omron”). Omronobjects to any terms or conditions proposed in Buyer’s purchase order or otherdocuments which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-out notice by Omron. Omron reserves the right to increase or decrease priceson any unshipped portions of outstanding orders. Payments for Products aredue net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoicessent to Buyer after deducting transportation charges, taxes and duties, and willbe allowed only if (i) the invoice is paid according to Omron’s payment termsand (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month orthe maximum legal rate, whichever is less, on any balance not paid within thestated terms.
5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than generalreal property and income taxes), including any interest or penalties thereon,imposed directly or indirectly on Omron or required to be collected directly orindirectly by Omron for the manufacture, production, sale, delivery, importa-tion, consumption or use of the Products sold hereunder (including customsduties and sales, excise, use, turnover and license taxes) shall be charged toand remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactoryto Omron, Omron reserves the right to stop shipments or require satisfactorysecurity or payment in advance. If Buyer fails to make payment or otherwisecomply with these Terms or any related agreement, Omron may (without liabil-ity and in addition to other remedies) cancel any unshipped portion of Prod-ucts sold hereunder and stop any Products in transit until Buyer pays allamounts, including amounts payable hereunder, whether or not then due,which are owing to it by Buyer. Buyer shall in any event remain liable for allunpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellationunless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in deliveryresulting from causes beyond its control, including earthquakes, fires, floods,strikes or other labor disputes, shortage of labor or materials, accidents tomachinery, acts of sabotage, riots, delay in or lack of transportation or therequirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shallpass from Omron to Buyer; provided that Omron shall retain a security inter-est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; ande. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writingto Omron within 30 days of receipt of shipment and include the original trans-portation bill signed by the carrier noting that the carrier received the Productsfrom Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that theProducts will be free from defects in materials and workmanship for a period oftwelve months from the date of sale by Omron (or such other period expressedin writing by Omron). Omron disclaims all other warranties, express or implied.(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THEPRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIRINTENDED USE. Omron further disclaims all warranties and responsibility ofany type for claims or expenses based on infringement by the Products or oth-erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-gation hereunder shall be, at Omron’s election, to (i) replace (in the formoriginally shipped with Buyer responsible for labor charges for removal orreplacement thereof) the non-complying Product, (ii) repair the non-complyingProduct, or (iii) repay or credit Buyer an amount equal to the purchase price ofthe non-complying Product; provided that in no event shall Omron be responsi-ble for warranty, repair, indemnity or any other claims or expenses regardingthe Products unless Omron’s analysis confirms that the Products were prop-erly handled, stored, installed and maintained and not subject to contamina-tion, abuse, misuse or inappropriate modification. Return of any Products byBuyer must be approved in writing by Omron before shipment. Omron Compa-nies shall not be liable for the suitability or unsuitability or the results from theuse of Products in combination with any electrical or electronic components,circuits, system assemblies or any other materials or substances or environ-ments. Any advice, recommendations or information given orally or in writing,are not to be construed as an amendment or addition to the above warranty.See http://oeweb.omron.com or contact your Omron representative for pub-lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLEFOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANYWAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM ISBASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.Further, in no event shall liability of Omron Companies exceed the individualprice of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies andtheir employees from and against all liabilities, losses, claims, costs andexpenses (including attorney's fees and expenses) related to any claim, inves-tigation, litigation or proceeding (whether or not Omron is a party) which arisesor is alleged to arise from Buyer's acts or omissions under these Terms or inany way with respect to the Products. Without limiting the foregoing, Buyer (atits own expense) shall indemnify and hold harmless Omron and defend or set-tle any action brought against such Companies to the extent based on a claimthat any Product made to Buyer specifications infringed intellectual propertyrights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-sive property of Omron Companies and Buyer shall not attempt to duplicate itin any way without the written permission of Omron. Notwithstanding anycharges to Buyer for engineering or tooling, all engineering and tooling shallremain the exclusive property of Omron. All information and materials suppliedby Omron to Buyer relating to the Products are confidential and proprietary,and Buyer shall limit distribution thereof to its trusted employees and strictlyprevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations andlicenses regarding (i) export of products or information; (iii) sale of products to“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens ofregulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any rightand no course of dealing between Buyer and Omron shall operate as a waiverof rights by Omron. (b) Assignment. Buyer may not assign its rights hereunderwithout Omron's written consent. (c) Law. These Terms are governed by thelaw of the jurisdiction of the home office of the Omron company from whichBuyer is purchasing the Products (without regard to conflict of law princi-ples). (d) Amendment. These Terms constitute the entire agreement betweenBuyer and Omron relating to the Products, and no provision may be changedor waived unless in writing signed by the parties. (e) Severability. If any provi-sion hereof is rendered ineffective or invalid, such provision shall not invalidateany other provision. (f) Setoff. Buyer shall have no right to set off any amountsagainst the amount owing in respect of this invoice. (g) Definitions. As usedherein, “including” means “including without limitation”; and “Omron Compa-nies” (or similar words) mean Omron Corporation and any direct or indirectsubsidiary or affiliate thereof.
Certain Precautions on Specifications and Use1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of theProduct in the Buyer’s application or use of the Product. At Buyer’s request,Omron will provide applicable third party certification documents identifyingratings and limitations of use which apply to the Product. This information byitself is not sufficient for a complete determination of the suitability of the Prod-uct in combination with the end product, machine, system, or other applicationor use. Buyer shall be solely responsible for determining appropriateness ofthe particular Product with respect to Buyer’s application, product or system.Buyer shall take application responsibility in all cases but the following is anon-exhaustive list of applications for which particular attention must be given:(i) Outdoor use, uses involving potential chemical contamination or electricalinterference, or conditions or uses not described in this document.(ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviationsystems, medical equipment, amusement machines, vehicles, safety equip-ment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or prop-erty. Please know and observe all prohibitions of use applicable to this Prod-uct. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUSRISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUTENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THEOVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for theuser’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogsand other materials is provided as a guide for the user in determining suitabil-ity and does not constitute a warranty. It may represent the result of Omron’stest conditions, and the user must correlate it to actual application require-ments. Actual performance is subject to the Omron’s Warranty and Limitationsof Liability.
4. Change in Specifications. Product specifications and accessories may bechanged at any time based on improvements and other reasons. It is our prac-tice to change part numbers when published ratings or features are changed,or when significant construction changes are made. However, some specifica-tions of the Product may be changed without any notice. When in doubt, spe-cial part numbers may be assigned to fix or establish key specifications foryour application. Please consult with your Omron’s representative at any timeto confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has beenchecked and is believed to be accurate; however, no responsibility is assumedfor clerical, typographical or proofreading errors or omissions.
�������������$��%��"����=GG�������������<��"����=GG�������������G� �(�����"����=GG������������
Cat. No. GC SAFETY-3 6/05 Specifications subject to change without notice Printed in USA
������� � ! "����#992;��� ��# �� �������!�������;�*2F9
$%&�'�&�&$&(
����������������������� (��� �� -��# ������%��!7'41�5,
�$)��$*�)+,,6��<�� ������������������� ���3���� �=
�,,�((&�&)&&
�� ������-��� �������������������.�����������������/������������������ ��0��1�2���
���111#� ��#�� 3��H�������/��- 2������.���2"���/����4����������������#
���!�����������5�6�� �����������������#�����# �������� � ���������� �!��������%�1�1,:,5������# �������������� �!��������%�1�1,2�5�