Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Designers, fabricators & contractors
ofprocess equipment & systems
Presentation 2005 2
1. HISTORY
2. COMPANY STRUCTURE
3. FACTS AND FIGURES
4. FACILITIES / CAPABILITIES
5. GEOGRAPHICAL LOCATION
6. PRODUCTS
7. CUSTOMERS
8. WHY ESCHER?
CONTENT
Presentation 2005 3
Escher was founded in 1925, in The Hague, The Netherlands, by Mr. Ir. Anne Escher.
In 1989 Escher as equipment manufacturer was relocated to Industrial Area Dintelmond in Heijningen, in the province of West Brabant.
Escher merged with the company Seamore in 1994, after which Gas Dehydration Systems became part of Escher s scope of supply.
1. HISTORY
Artist M.C. Escher 1898-1972
Presentation 2005 4
In 2003 Escher Holland B.V. became a member of the RijnDijk Groep B.V.,
a holding company of a number of subsidiaries in the sectors Steel Structures, Industry, Infra and Supply & Services.
2. COMPANY STRUCTURE
Presentation 2005 5
2. COMPANY STRUCTURE (continued)
Organisation ChartEscher Holland B.V.
Managing Director
Quality Assurance and HSE
Quality Control
Management assistance
ProductionMarketing and
Sales
Production
Planning / Work-preparation
Stores / Logistics
Finance
Sales Administration
Engineering
Technique
Project Management
MaintenanceServices
Projects
Procurement
I.C.T.Human
Resources
Sales
Proposal Department
Via main off ice
Presentation 2005 6
Annual turnover (Eur. x 1000):
2000: EUR. 17,250
2001: EUR. 15.000
2002: EUR. 14.800
2003: EUR. 14.300
2004: EUR. 13.200
2005: (forecast) EUR. 14.500
3. FACTS AND FIGURES
Presentation 2005 7
Total number of employees: 70
Fabrication facilities: - Covered workshops: 7000 m2
- Covered warehouses: 1000 m2
- Open yard: 6000 m2
- Future extension area: 7000 m2
Total: 21000 m2
Manufacturing capabilities:Averages Maximum
Unit weight: (ton) 5 - 200 600Length:(m) 10 - 60 100 Width: (m) 4 - 10 15 Height: (m) 4 - 6 15Diameter: (m) 1 - 7 10Thickness: (mm) 1 - 150 250 Annual capacity(manhours): 100.000 150.000
4. FACILITIES / CAPABILITIES
Presentation 2005 8
Transport (water): facilities:
Own Ro-Ro loadoutWidth 11mDraft 3 m
Length/Height no limitations.Weigh 600 Ton (Ro-Ro)
100 Ton (Escher crane)
Certifications:
ISO 9001 (version 2000)ASME U- and U-2 Stamp
HP 0.
4. FACILITIES / CAPABILITIES continued
Presentation 2005 9
The Netherlands, western Europe.
5. GEOGRAPHICAL LOCATION - WORLDWIDE
Presentation 2005 10
Escher Holland B.V. is located in Heijningen, which is in the South-West of the Netherlands.Our facilities offer direct unobstructed access to the seaports of Rotterdam and Antwerp and the European waterways.
5. GEOGRAPHICAL LOCATION - NATIONAL
Presentation 2005 11
Escher designs and manufactures Process Equipment, starting from project definition to commissioning assistance:
6.1 Process Packages:Oil / Gas / Condensate Treatment Units such as:
- Gas Dehydration and Glycol Regeneration Systems- Gas or Liquid Dehydration Systems using Molecular Sieve or Silicagel Adsorbents- LTS units (MEG / DEG regeneration)- Separation- , Fuel Gas- , Metering- and Valve Skids
6.2 Pressure vessels:Columns, Reactors, Drums, Coalescers, Separators, Slug Catchers, K.O. Drums, Deaerators, Steamdrums.
6. PRODUCTS
Presentation 2005 12
Process Flow Diagram Gas Dehydration and Glycol Regeneration
6.1 Packaged Gas and Oil Processing Systems
Presentation 2005 13
Client: JGC Corporation Japan, for Sohar Refinery OmanEscher Ref: 7021Delivered: 2004.
Sohar Refinery Company, Oman
Scope of supply:
One (1) Propylene (liquid) drying package, using desiccant adsorbent, consisting of:
1 Regeneration Skid, steam heated and seawater cooled.
2 Drier Towers
Presentation 2005 14
Client: Azerbaijan International Operating Co.(AIOC, operated by BP Exploration c/o Halliburton)
Escher Ref: 7018, 7019, 7020 & 7024Delivered: First units in 2003, last unit scheduled for 2005.
ACG Project, Caspian Sea; Central, East, West Azeri and Phase 3, Offshore
Scope of supply:
A Total of five (5) Gas Dehydration Packages,each consisting of:
Glycol Contactor, material: Carbon Steel, SourService
Inlet Scrubber, material: Carbon Steel + 904L weld overlay
TEG Regeneration Unit (Electric heated)
Presentation 2005 15
Client: JGC Corporation Japan, for Bahrein National GasEscher Ref 7017Delivered: 2003
Compressor Station No. 7 (CS-7) Project, Bahrain
Scope of supply:
One (1) Gas Dehydration Package,consisting of:
Glycol Contactor with integrated scrubber.
Material: Carbon Steel, partly weld overlay316L.
TEG Regeneration Unit, Fuel gas heated, c/w burner management system with local (Eexd) panel.
Presentation 2005 16
Client: Daewoo Korea, for SPDC NigeriaEscher Ref 7016Delivered: 2003
Cawthorne Channel AG Gathering Project, Nigeria
Scope of supply:
Three (3) Gas Dehydration Packages, each consisting of:
Glycol Contactor with integrated scrubber.
Material: Carbon Steel, partly weld overlay 316L.
TEG Regeneration Unit, Electric heated, c/w overhead vapor condensor (air cooled).
Presentation 2005 17
6.2 Pressure Vessels
Escher is specialized in:
1. Weld overlay (I.D. 35 to 7000 mm):Base mtl.: Carbon Steel or (Low) AlloyOverlay materials: SS316(L)
SS347SS904(L)Inconel 625etc.
2. Special materials / designsCr-Mo steels, Cr Ni steelsHigh Alloys
3. Heavy wall thickness / heavy weightvessels (supplied: 165 mm / 520 tons)
Presentation 2005 18
Client: Heerema B.V., for Wintershall Escher Ref: 2508Delivered: 2004
Wintershall F-16 A Platform North Sea
Scope:
Total of eleven (11) Pressure Vessels:
Materials: Duplex (1.4462), SS316L and Carbon Steel.
Diameters from 600 to 1560 mm;
TT lengths from 2000 to 6250 mm;
Weights from 1050 to 20000 kgs each.
Presentation 2005 19
Client: Daewoo Engineering & Construction Co. for SPDC Nigeria.Escher Ref: 2492Delivered: December 2002
Cawthorne Channel AG Gathering Project, Nigeria
Slugcatchers:
1 HP Slugcatcher, Dia: 3800 mm,
TL-TL: 11400 mm,
Wall thickness 71 + 4 mm,
Material: SA 516 Gr. 65,
Weld overlay Stainless Steel 316 L,
Weight: 105.000 kg.
1 LP Slugcatcher, Dia: 2960 mm,
TL-TL: 8800 mm,
Wall thickness 56 + 4 mm,
Material: SA 516 Gr. 65,
Weld overlay Stainless Steel 316 L,
Weight: 88.000 kg.
Presentation 2005 20
Client: Shell UK Oil Products LimitedEscher Ref: 2491Delivered: February 2003
CD Hydro Depentaniser Project,Shell Stanlow
CD Hydro Depentaniser, Column,
Dia: 3800 mm,
TL-TL 65390 mm,
Wall thickness: 26-36 mm,
Material BS 1501-224-430 B,
Weight 265.000 kg
Presentation 2005 21
Client: Tessag (Uhde Edeleanu) GermanyEscher Ref: 2486Delivered: 2002
DEA UK Wesseling Project
1 Reactor, Dia: 4850 mm, TL-TL: 24960 mm, Wallhickness: 112-+ 4.5 mm, Material 12Cr Mo 9 10,
Weld overlay SS 347, Weight: 520.000 kg
Presentation 2005 22
Escher s clients include but are not limited to:
End-Users:
7. CUSTOMERS
NAM
Shell
Presentation 2005 23
EPC Contractors:
Presentation 2005 24
You should choose Escher as your supplier for Process Equipment because:
Escher Holland B.V. performs ALL stages of a project:
- Starting from Process Engineering and Mechanical design
-
-
- E&I installation, insulation, testing
- Loading of the equipment
On ONE facility in Heijningen the Netherlands.
This enables Escher Holland B.V. to offer you, as a partner for your projects, the best
Reliability, Flexibility and Quality.
8. WHY ESCHER?