Upload
others
View
17
Download
0
Embed Size (px)
Citation preview
FABRICATORS • ERECTORS • BRIDGE CONSTRUCTORSBOLTING • SAFETY • ANCHORS • TOOLS • ANCHOR BOLTS
VISIT OUR WEBSITE GONEFCO.COMPROVIDING PRODUCTS
TO MEET:• BUY AMERICA • BUY AMERICAN• AIS
2 STRUCTURAL BOLTINGTENSION CONTROL BOLTS
• Designed for use with tension control, or twist off type bolts
• One sided, one man installation• Lightweight, electric operation• Quiet, non-impacting operation• No tool or air compressor calibration
RENT MERENT ME
TC Bolt Installation Tool
Part No. DescriptionS61EZ 5/8" - 7/8" dia. TC BoltsGS91EZ 1", 3/4 & 7/8" dia. TC BoltsGS111EZ Up to 1-1/8" dia. TC Bolts
Keep it together with a NEFCO bucket
Index
Structural Bolting 2 - 5
Safety 6 - 7
Anchors 8 - 9
Threaded Rod & Studs & Anchor Bolts 10
Wire Rope & Hardware 11
Power Tools 12
Grinders & Abrasives 12
Magnetic Drills 13
Hand Tools 13
Lindapter 14
Weld Studs 14
Strut Channel & Fittings 15
Custom Fabrication 15
• 593 ft.lbs. of max torque• Bolt tip ejecting lever located
by power trigger• No-lock on trigger switch
Shear Wrench
Part No. Size6922NB 3/4" 7/8"
• Computerized inspection and documentation• Blueprint and specification interpretation• Lot traceability• Manufacturer's test reports and certification• Chemical and physical test reports
Inner-Outer Sockets included
» Cold Formed Specials » Screw Machining » Secondary Operations » Shoulder Screws » Precision Pins & Dowels
» Socket Heads » Nuts and Washers » Set Screws » Retaining Rings » Rivets
QUALITY ASSURANCENEFCO offers total quality assurance with full traceability, inspection, and testing in house
» Certified ISO 9001:2015 (East Hartford)
» Computerized Inspection and Documentation» Blueprint and Specification Interpretation» Lot Traceability» Manufacturer’s Test Reports and Certification» First Article Inspection» Chemical and Physical Test Reports» Full PPAP Reports» DFARS & ROHS Compliant
Fasteners to Print or Custom Developed Specials
CUSTOM ENGINEERED FASTENERSSupport & Services:
» Application Engineering and Design
» Prototypes and/or Samples
» Recommendations and Custom Part Drawings
» Technical Assistance
» Domestic and Global Sourcing
Core Products:
Quality Assurance
3STRUCTURAL BOLTINGTENSION CONTROL BOLTS
Tru-Tension® Fasteners are designed to be installed with various types of lightweight portable electric wrenches specifically intended for use with this style of structural fasteners. They can be utilized for any applications where A325 or A490 – Type I or Type III (weathering steel) hex bolts are specified. The installation tool has an inner socket which engages the spline tip of the bolt, while the outer socket engages the nut. The outer socket rotates the nut relative to the bolt spline, and when the tension is sufficient in the fastener, the spline tip simply twists-off, leaving the tightened bolt correctly installed in the connection.
A325 /A490 TC (Tension Control) Bolts
• TC Bolts know when the specified tension has been reached; the special tip shears
• No operator or tool can accidentally over tension - It’s a calibrated bolt
• Visual inspection: when the tip is gone, tension is correct
• TC Bolts are installed faster with less operator fatigue
• Noiseless, one man installation• Provides absolute traceability and
worldclass quality
Nominal Bolt Size (in.)
Minimum Tension1 in 1000s of pounds (kips)
ASTM F1852 (A325) ASTM F2280 (A490)5/8 20.0 25.2
3/4 29.4 36.8
7/8 41.0 51.5
1 53.6 67.2
1-1/8 58.8 84.0
How the Tru-Tension® System Works
Grip Length is defined as the total thickness of all connected material, exclusive of washers. Each ASTM F436 washer used is 5/32 in. thick, use 5/16 in. for each beveled washer used.
Fastener tension test requirements for slip-critical connections and connections subject to direct tension.
Structural Fastener Tension
1 Equal to 70 percent of specified minimum tensile strengths of bolts (as specified in ASTM Specifications for test of full size A325 and A490 bolts with UNC threads loaded in axial tension). May be rounded to nearest 1000 lbs. (chart includes additional 5% per AISC spec.)
Bolt Dia. (in.)
To determine bolt length, add noted amount to the steel to steel grip and round
up to the next std bolt length. (in.)5/8 7/8
3/4 1
7/8 1-1/8
1 1-1/4
1-1/8 1-1/2
Determination of Tru-Tension® Length
4 STRUCTURAL BOLTINGHEX HEAD
• Heavy Hex Bolts with a washer-face on the underside of the head primarily used in Structural Steel joints
• Available in Black (Plain), Hot Dip and Mechanical Galvanized finishes
• Available in Type I & Type III (Weathering Steel)• A325-T full-thread in Type I only• Type I available in ½" through 1¼" diameters• Type III available in ¾" through 1" diameters• Specify Finish & Type (I or III) when ordering
• Plain • Hot Dipped Galvanized (ASTM A153 F2329) • Mechanical Galvanized (ASTM B695) • Type III (Weathering Steel) Available
A325-3 A490-3
Diameter
½" - 13 5⁄8" - 11 ¾" - 10 7⁄8" - 9 1" - 8 11⁄8" - 7 1¼" - 7
Length (inch)
1¼ — — — — — —1½ 1½ 1½ — — — —1¾ 1¾ 1¾ 1¾ — — —2 2 2 2 2 — —
2¼ 2¼ 2¼ 2¼ 2¼ 2¼ 2¼2½ 2½ 2½ 2½ 2½ 2½ 2½2¾ 2¾ 2¾ 2¾ 2¾ 2¾ 2¾3 3 3 3 3 3 3
3¼ 3¼ 3¼ 3¼ 3¼ 3¼ 3¼3½ 3½ 3½ 3½ 3½ 3½ 3½3¾ 3¾ 3¾ 3¾ 3¾ 3¾ 3¾4 4 4 4 4 4 4— 4½ 4½ 4½ 4½ 4½ 4½— 5 5 5 5 5 5— 5½ 5½ 5½ 5½ 5½ 5½— — 6 6 6 6 6
A325 /A490 Structural Bolts
ASTM DESIG.
BOLT TYPE
BOLT FINISH ASTM A563 NUT GRADE AND FINISHASTM F436 WASHER
TYPE AND FINISH
A3251
Plain (uncoated) C, C3, D, DH, and DH3; plain 1; plainGalvanized DH ; galvanized and lubricated 1; galvanized
Zn/AI Inorganic, per ASTM F1136 Grade 3
DH; Zn/AI Inorganic, per ASTM F1136 Grade 5 1; Zn/AI Inorganic, per ASTM F1136 Grade 3
3 Plain C3 and DH3; plain 3; plain
F18521
Plain (uncoated) C, C3, DH and DH3; plain 1; plain
Mechanically Galvanized DH; mechanically galvanized and lubricated 1; mechanically galvanized
3 Plain C3 and DH3; plain 3; plain
A4901
Plain DH and DH3; plain 1; plainZn/AI Inorganic, per ASTM
F1136 Grade 3DH ; Zn/AI Inorganic, per ASTM F1136 Grade 5 1; Zn/AI Inorganic, per ASTM F1136 Grade 3
3 Plain DH3; plain 3; plain
F22801 Plain DH and DH3; plain 1; plain3 Plain DH3; plain 3; plain
Acceptable ASTM A563 Nut Grade and Finish and ASTM F436 Washer Type and Finish
ASTM A563 ASTM A563 ASTM A194 ASTM A563 ASTM A563
Grade C Grade DH Grade 2H Grade C3 Grade DH3
Nut Identification and Grade Markings
5STRUCTURAL BOLTINGHEX HEAD
Finishes: Plain • Hot Dip Galvanized • Mechanical Galvanized
SIZ
ES
1/2" 7⁄8" 1-1/4"
5⁄8" 1"
3/4" 1-1⁄8"
Flat Washers ASTM A325 / F436
CALL FORMORE SIZES
Keep it together with a NEFCO bucket
Rotational Capacity Test Report
Date 8/31/2018Sales Ticket Number S2988524Lot Number BOLT: 398383A WASHER: D5881 NUT: 406805BPart NumberDescription 7/8-9 X 4-1/4 A325 HDG
Operator Test Method Material Bolt Diameter Bolt LengthWES FHWA ASTM A325 7/8 4.25
Calibration InformationTest Equipment Serial Number Calibration DateTension Sensor HT-138 (S/N V110333) 1/27/2017Torque Sensor HT-138 (S/N 201235) 1/27/2017
Rotational Capacity Test Results Criteria Sample 1 Sample 2 Sample 3 Sample 4 Sample 5Pre-tension (lbs.) 4000 4001 4008 N/A N/A N/AMinimun Installation Tension (lbs.) 39000 39083 39126 N/A N/A N/AMaximum Allowable Torque (ft-lbs) 0 335 247 N/A N/A N/ADegrees of Rotation 360 361 361 N/A N/A N/AMinimum Tension at Full Rotation (lbs.) 45000 58129 64898 N/A N/A N/A
Rotational Capacity Test Results - continued
Criteria Sample 1 Sample 2 Sample 3 Sample 4 Sample 5
Thread Visual PASS/FAIL PASS PASS N/A N/A N/ATest Result PASS/FAIL PASS PASS N/A N/A N/A
• Flexible silicone is embedded in the depressions under the bumps
• Tighten bolt until calibrated amount of orange silicone appears
Squirter® DTI's
How Much Squirt is Tight?
Direct Tension
IndicatorsGREEN MEANS GO!
BOLT DIA. THREAD LENGTH1/2" 1.005/8" 1.253/4" 1.387/8" 1.501" 1.75
1-1/8" 2.001-1/4" 2.001-3/8" 2.251-1/2" 2.25
Structural Bolt Dimensions
Finishes: Plain • Hot Dip Galvanized
Beveled Square Washers ASTM A325 / F436
SIZ
ES
1/2" 7⁄8"
5⁄8" 1"
3/4"
Load Indicators
ViewTite™
NUT SIDE SELF-INDICATOR
6
4501C
SAFETY
Hard Hats & Face Shields
Clothing Hearing & Eye Protection
Hand Protection
PRODUCTS INCLUDED ARE ONLY THE MOST COMMON SAFETY PRODUCTS REQUESTED BY OUR CUSTOMERS. NEFCO STOCKS COMPLETE LINES OF SAFETY EQUIPMENT. PLEASE CALL FOR PRODUCTS NOT LISTED.
Personal Protection Ladders
FS1506FE3200
475360
15190
15182
68-105
SB001
311-1252
85-1105IOD302-0500-YEL
1517815181
1965-10
1514BL
RWG559
Perimeter Protection
GNEP(SIZE)5-T8
90754C90563C 90673C
First Aid Kits
FXP1708
7SAFETY
PRODUCTS INCLUDED ARE ONLY THE MOST COMMON SAFETY PRODUCTS REQUESTED BY OUR CUSTOMERS. NEFCO STOCKS COMPLETE LINES OF SAFETY EQUIPMENT. PLEASE CALL FOR PRODUCTS NOT LISTED.
Fall Protection Kits Harnesses
Self-Retracting Lifelines
Lifeline Kits
Tethers
Fall Protection
3500225
1161207
SG-56150-ORG-FR
FS806-100 (100 ft. lifeline)
FS806-60 (60 ft. lifeline)
3590543 3190R310020
19767
10600
Netting
Anchorage Devices
4650-3
599100
8 ANCHORS CHEMICAL / EPOXY
SIMPLE CERTAINTY In the selection and installation of adhesive anchors
Anchor Specification, Simplified.
Anchor Installation, Certainty.
Red Head reduces complexity by covering all your anchoring needs with fewer products. Backed by ICC-ES evaluation reports, this versatile offering simplifies specification workand provides added assurance that chemical anchors will perform to design expectations.
Selecting the wrong adhesive for the job is a key concern and common cause of anchor failure on the job site. The simplicity and versatility of Red Head’s adhesive line minimizes the risk of picking the wrong adhesive for the anchoring application and job site conditions at hand.
SIMPLIFIED CHOICES MINIMIZE THE RISK OF INSTALLATION ERROR
Red Head products are engineered to provide the most versatility whenit comes to providing superior bond strength across many material types and installation conditions, while meeting a wide array of code requirements.
RED HEAD ADHESIVE ANCHORING SYSTEMS ARE DESIGNED FOR:
Reliable Performance
Broad Application Coverage Jobsite Productivity
Red Head adhesives were formulated to go above-and-beyond industry standards.
The performance of all of our adhesives is backed by ICC-
ES evaluation reports and 55+ state DOT listings.
Whether its light-duty or heavy-duty, concrete or
masonry, deep embedment holes or core-drilled holes, wet conditions or extreme
temperatures, Red Head hasan adhesive anchor solution.
Red Head knows that time = money, and our adhesives are here to help save some of both.
No need to reschedule labor when the rain arrives, keep installing Red Head adhesives! The versatility of the Red Head product line
means fewer products to train a crew on and fewer products to purchase and stock.
HY 200-A, HY 200-RHY 100, HY 70
HIT-ICEHY-10 PLUS
AC200+™
AC100+GOLD®
AC50™
AT-XP® AT
RE 500 V3 Pure110+® SET-XP®
RE 100HTE 50
Pure50+™
PE1000+®
PURE GP
SET®
ET-HP®
EDOT
THE MOST VERSATILEQUICK-CURE
FOR THE MOST DEMANDING JOBS EVERYDAY EPOXY
9ANCHORS MECHANICAL / EPOXY
* Hilti is a registered trademark of Hilti Corporation
CROSS REFERENCE CHART
Product Category DeWalt Product Hilti* Product NameHigh Performance Structural Concrete Anchors
Epoxy Adhesive Anchor Pure110+® RE 500 V3
Hybrid Adhesive System AC200+™ HY 200
Wedge Anchor Power-Stud®+ SD2 KB-TZ
Screw Anchor Screw-Bolt+™ KH-EZ
Structural Concrete Anchors - Value Solutions
Epoxy Adhesive Anchor Pure50+™ RE 500
Hybrid Adhesive System AC100+ Gold® HY 100
Wedge Anchor Power-Stud®+ SD1 KB3
Masonry Anchors (CMU)
Hybrid Adhesive System AC100+ Gold® HY-70
Wedge Anchor Power-Stud®+ SD1 KB3
Screw Anchor Screw-Bolt+™ KH-EZ
Outdoor Anchors (Exterior)
Epoxy Adhesive with Stainless Rods Pure110+® RE 500 V3
Hybrid Adhesive System with Stainless Rods AC200+™ HY 200
Stainless Wedge Anchor Power-Stud®+ SD4/SD6 KB-TZ Stainless
Stainless Screw Anchor Wedge-Bolt Stainless No Equivalent
Specialized Heavy Duty Structural Anchors
Heavy Duty Sleeve Anchor Power-Bolt®+ HSL-3
Undercut Anchor Atomic+ Undercut® HDA
Direct Fastening System
Powder Actuated Fasteners CSI Pins X-U Pins
Gas Actuated Fasteners Trak-It® C5 Pins Powder-Actuated Pins
Hanger Type Anchors
Cast-in-Place Wood Framework Wood-Knocker® II+ KCS-WF
Cast-in-Place Metal Deck Bang-It®+ KCS-MD
Cast-in-Place Metal Deck with Spanner DDI+™ No Equivalent
PT Slabs / Hollow Core Plank Anchor Mini-Undercut+™ No Equivalent
Screw Type Hanger Anchor Hangermate®+ KH-EZ I
10
• Low carbon A36• ASTM F1554 Grade 55/105• ASTM A449• Stainless Steel 304/316• ASTM A193 B7, B8, B8M
THREADED RODS & STUDS & ANCHOR BOLTS
THREADED RODALL FINISHES:• Plain• Galvanized • Zinc Plated
STOCK MATERIAL:• Carbon Steel• ASTM A449• Hardened Steel • Stainless Steel (304/316)• B7 - ASTM A193• Coil Thread (ASTM A108)
6 • 10 • 12 ft. LengthsIN-HOUSE SERVICESRod Cutting - Anchor Bolts
STUD MANUFACTURING
Anchor Bolts• Order nuts and
washers separately• Special sizes available • Specify dimensions -
material & finish required
Anchor Bolt Sleeves• Provides a grout pocket
around anchor bolts to allow you to position anchor bolts exactly where you want them
• Grout pockets keep free of water and dirt
• Bolt cuts its own thread in top of polyethylene sleeve
• Non-corrosion / non-conductive
• No custom pre-fitting required, no welding, forming, pipe cutting or packing
Fully Threaded Studs
Welded to Plates Anchor Plates
Chisel Point 45° Point
Sag/Tie Rods
Swaged Anchor Bolts Eye Nuts
Clevises & Clevis Pins
Turnbuckles & Assemblies
• Low carbon A36• ASTM F1554 Grade 55/105• ASTM A449• Stainless Steel 304/316• ASTM A193 B7, B8, B8M
Coil Threaded Rod
11WIRE ROPE & HARDWARE
Wire Rope / Perimeter Cable 3/8" x 2500' per spool / 1/2" x 1000' per spool
Perimeter FlagsClips malleable & forged
Wire Rope
How to Order Wire RopeGive complete information on your order to
prevent errors and avoid delays
Item Example Length of rope required 150-ft
Diameter (maximum measure) 5/8”
Construction 6 x 19
Core type IWRC
Type of material Improved plow steel
Direction of type and lay Right lang lay
Type of equipment Shovel hoist rope
6 x 7 - Regular LayThis is a stiff rope, highly resistant to abrasive wear. It is a standard recommendation for guys, stays, and rigging.
6 x 19(6 x 25 Filler Wire)This is the true work horse rope of the construction equipment field. It combines good flexibility and strength with high resistance to crushing and abrasion.
Malleable & Forged Wire Rope Clips Galvanized
HOT DIPPED GALVANIZED IN STOCKSTAINLESS STEEL ALSO AVAILABLE
Standard Duty Wire Rope Thimble Zinc Plated
Heavy Duty Wire Rope Thimble Galvanized
Sleeves and Stops Aluminum and Copper
12 POWER TOOLS
GRINDERS & ABRASIVES
Chop SawsRotary Hammers
Corded & Cordless SDS+, SDS-MAX, Spline
Impact Wrenches
Corded & Cordless 1/4"-7/8"
Cutting, Grinding, & Chop Saw Wheels
13MAGNETIC DRILLS
Tool Series: RotaCut™ Extended Reach Holcutter™ Carbide Holcutter™ RotaLoc™ RotaLoc Plus™ Rotabroach® Copperhead™ 42/43,000
Diameter RangeMin. / Max.
¼" to 1 ½" 3⁄8" to 9⁄16" 11⁄16" to 3" 11⁄16" to 3"½" to 1 1⁄16"
w/ stack geometry
½" to 1 3⁄8" 7⁄16" to 2 3⁄8" 9⁄16" to 1 ½" ¾" to 3 1⁄16"
Max. Depth of Cut ¼" to ½" 1⁄4" 1⁄8" 1⁄8" ¾" 1" 1", 2", or 3" 2" 2" or 3"
Mounting3⁄8" or ½"
Triple Flat Shank3⁄8" Triple Flat Shank
3⁄8" Triple Flat Shank
3⁄8" or ½"Triple Flat Shank
Bayonet Style Bayonet Style¾" Double Flat Shank
¾" Double Flat Shank
¾" Weldon or1 ¼" Weldon
HOUGEN CUTTER COMPARISON CHARTCutters by Champion, Dewalt, & Milwaukee also available - Call for details
A. Leather-Bottom Bucket B. ReamersC. Black Oxide Adjustable Spud Wrench (1-1/2")D. Black Oxide Open End Spud Wrench (offset head)E. 1/2" Drive Ratcheting Construction Wrench
A. B.
C. D. E.
F. G.
H. I.
J.
HAND TOOLS
F. Broad-Head Bull PinsG. Barrel Type Drift PinsH. Tool LanyardsI. 1/2"-1-1/4" Drive Deep Impact Sockets - 6ptJ. Hougen 12,000 Series Cutter Kits
14
WELD STUDS
The strongest expansion bolt with full ICC-ES seismic approval30% higher tensile capacity due to High Clamping Force design23% higher shear resistance due to high quality materials(ICC-ES data, 3.4" Hollo-Bolt vs. other products evaluated to AC437
• For HSS and structural steel sections• Fast, cost saving installation from one side• Highest resistance to shear and tensile loads• Unique high clamping force design• Hot Dip Galvanized corrosion protection• All sizes approved for SDC A through F
by
a) Hexagonal b) Countersunk c) Flush Fit
High Clamping Force mechanism (sizes 5/8" and 3/4")
a) Hexagonal b) Countersunk Collar Safe Working Loads (FOS 5:1)
Product Code
Bolt B
Product Code
Bolt B
Clamping Thickness W
Outer Ply min t
Sleeve Length L
Height H
Ø D
A/FTightening
TorqueTensile
lbs.Single
Shear lbs.LHBMO8#1 5/16" x 2" LHBCSKMO8#1 5/16" x 2" 1/8" - 7/8" - 1-3/16" 3/16" 7/8" 3/4" 17 899 1124LHBMO8#2 5/16" x 2-3/4" LHBCSKMO8#2 5/16" x 2-3/4" 7/8" x 1-5 /8" - 1-15/16" 3/16" 7/8" 3/4" 17 899 1124LHBMO8#3 5/16" x 3-9/16" LHBCSKMO8#3 5/16" x 3-9/16" 1-5/8" - 2-3/8" - 2-11/16" 3/16" 7/8" 3/4" 17 899 1124LHBM10#1 3/8" x 2-3/16" LHBCSKM10#1 3/8" x 2" 1/8" - 1" - 1-3/16" 1/4" 1-1/8" 15/16" 33 1910 2248LHBM10#2 3/8" x 2-3/4" LHBCSKM10#2 3/8" x 2-3/4" 1" - 1-13/16" - 1-7/8" 1/4" 1-1/8" 15/16" 33 1910 2248LHBM10#3 3/8" x 3-9/16" LHBCSKM10#3 3/8" x 3-9/16" 1-13/16" - 2-3/4" - 2-5/8" 1/4" 1-1/8" 15/16" 33 1910 2248LHBM12#1 1/2" x 2-3/8" LHBCSKM12#1 1/2" x 2-3/16" 1/8" - 1" - 1-3/8" 1/4" 1-1/4" 1-3/16" 59 2360 3372LHBM12#2 1/2" x 3-5/32" LHBCSKM12#2 1/2" x 3-1/8" 1" - 1-13/16" - 2-1/4" 1/4" 1-1/4" 1-3/16" 59 2360 3372LHBM12#3 1/2" x 4" LHBCSKM12#3 1/2" x 4" 1-13/16" - 2-3/4" - 3-1/8" 1/4" 1-1/4" 1-3/16" 59 2360 3372
Hollo-Bolt HCFLHBM16#1 5/8" x 3" LHBCSKM16#1 5/8" x 2-3/4" 1/2" - 1-1/8" 5/16" 1-5/8" 5/16" 1-1/2" 1-7/16" 140 4720 6744LHBM16#2 5/8" x 4" LHBCSKM16#2 5/8" x 4" 1-1/8" - 2" 5/16" 2-1/2" 5/16" 1-1/2" 1-7/16" 140 4720 6744LHBM16#3 5/8" x 4-3/4" LHBCSKM16#3 5/8" x 4-3/4" 2" - 2-13/16" 5/16" 3-5/16" 5/16" 1-1/2" 1-7/16" 140 4720 6744LHBM20#1 3/4" x 3-9/16" - - 1/2" - 1-5/16" 5/16" 1-15/16" 3/8" 2" 1-13/16" 221 7868 8992LHBM20#2 3/4" x 4-3/4" - - 1-5/16" - 2-3/8" 5/16" 3" 3/8" 2" 1-13/16" 221 7868 8992LHBM20#3 3/4" x 5-7/8" - - 2-3/8" - 3-3/8" 5/16" 4" 3/8" 2" 1-13/16" 221 7868 8992
D L #1
Dia. Min. Length Before Weld
1/2 1-1/8
1/2 1-1/2
1/2 1-5/8
1/2 2-1/8
1/2 2-5/8
D L #1
Dia. Min. Length Before Weld
1/2 3-1/8
1/2 4-1/8
1/2 5-5/16
1/2 6-1/8
1/2 8-1/8
D L #1
Dia. Min. Length Before Weld
3/4 3-3/16
3/4 3-11/16
3/4 4-3/16
3/4 4-11/16
3/4 5-3/16
D L #1
Dia. Min. Length Before Weld
3/4 6-3/16
3/4 7-3/16
3/4 8-3/16
3/4 9-3/16
3/4 10-3/16
15
1"3 2
4 1"8
7"1 16
STRUT CHANNEL & FITTINGSPF 100 1-5/8" x 3-1/4" x 12 ga.
PF100 PF100 2T3
Welded Configurations
PF 150 1-5/8" x 2-7/16" x 12 ga.
PF150 PF150 2T3
Welded Configurations
3 ¼"DEEP
2 7/16"DEEP
PF 200 1-5/8" x 1-5/8" x 12 ga.
PF200 PF200 2T3
1 5/8"DEEP
12GAUGE
PF 500 1-5/8" x 13/16" x 14 ga.
PF500 PF500 2T3
13/16"DEEP
14GAUGE
12GAUGE
12GAUGE
2-Hole 90° Corner Angles
PF 603
4-Hole 90° Corner Angles
PF 607
4-Hole T-Plate
PF 714
Square Washer
PF 619¼" , 5⁄16", 3⁄8", ½", 5⁄8", ¾", 7⁄8" Bolt Sizes
U-Washer
PF 2883⁄8", ½", 5⁄8" Bolt Sizes
Steel Brackets
Channel Nuts
2"
1 7"8
21"3
5 83"
5"81
Bolt Size "A"
5"81
A
Welded Configurations
Welded Configurations
• Take offs• Detailed submittals• Stamped engineering• P.E. drawings and details
CUSTOM FABRICATION
Seismic Bracing / Vibration Isolation Equipment
Strut FabricationStrut • Precut to Size • Pre-Assembled Trapeze Hangers
Materials Pre-Galvanized Steel • Hot Dip Galvanized Steel • Aluminum
Stainless Steel • Welding • Cutting • Assembly • Punching • Painting
Engineering Services• Designed per plans & specifications • Detailed submittals• Supports located on drawings• P.E. stamped drawings & calculations (as required)
Engineered Pipe Hanger Support Systems – Turnkey Hanger Systems• Engineer and design per plans and specifications • Fabricate and supply • Detailed submittals• Field walk-through & verification • P.E. stamped documents and drawings• Supports located on drawings • Pipe stress analysis (if required)
13
126
54
9
11
3
10
12
78
SHARP® is NEFCO’s acronym for five categories of crucial construction products: Strut, Hardware, Anchoring, Rod and Pipe Hangers.
Unrivaled inventory expertise and product selection across these five categories make NEFCO a leader in the construction supplies business. BB025 REV21
1 HARTFORD 800-969-0285 - 411 Burnham St., E. Hartford, CT 06108
2 BOSTON 800-645-6155 - 530 Turnpike St., Canton, MA 02021
3 WASHINGTON, D.C. 877-419-2755 - 1101 Hampton Park Blvd., Ste. 300, Capitol Heights, MD 20743
4 PHILADELPHIA 855-567-7888 - 415 Boot Rd., Downingtown, PA 19335
5 NEW YORK CITY 844-633-2669 - 1715 Washington Ave., Bronx, NY 10457
6 ALBANY 844-633-2625 - 45 Railroad Ave., Colonie, NY 12205
7 ROANOKE 800-868-9746 - 3304 Salem Turnpike NW, Roanoke, VA 24017
8 HARRISONBURG 540-432-9622 - 688 Cottontail Trail, Mt. Crawford, VA 22841
9 GREENSBORO 336-272-9954 - 322-A Edwardia Dr., Greensboro, NC 27409
10 CHARLOTTE 800-288-9200 - 3316 South Blvd., Charlotte, NC 28209
11 POMPANO BEACH 954-532-6098 - 290 S.W. 14th Ave., Pompano Beach, FL 33069
12 ORLANDO 800-969-0285 - 8123 S. Orange Ave., Ste. 158, Orlando, FL 32809
13 SYRACUSE 800-969-0285 - 4629 Crossroads Park Drive, Liverpool, NY 13088