Design IIDr: Mahmod ElsamantyProject IGroup 4Ahmed Nader
40045Mostafa Mahmoud 40097Ahmed Ismael 40132Yousef Salah
40092Mahmoud Farag 40101GearsGears are defined as toothed wheels or
multilobed cams , which transmit power and motion from one shaft to
another by means of successive engagement of teeth . Classification
Of Gears :-
The project :- you are required to make a full design for all
the shafts, gears and keys. Moreover, you are required to select a
suitable bearing to supports these shafts and their loads.
Gear1-Gear2 type : Helical Gear Gear3-Gear4 type : Spure Gear
Power = 40 KWInput RPM = 1480Output RPM = 70A =110 mmB =170 mmC =5
mmD = 15 mmE = 5 mm
