DESIGN PROJECT

“SPARKLING HEART”

GREETING CARD & BROOCH

VALENTINE´S DAY

2 /8 WWW.CREATE-YOUR-STYLE.COM

VALENTINE´S DAY

GREETING CARD & BROOCH

“SPARKLING HEART”

SWAROVSKI ELEMENTS Supplies & Tools

Gluing

Article Product Group Article No. Amount Size Color Color Code

Flat Backs No Hotfi x 2028 11 pcs. SS 12 Light Siam F 227

Flat Backs No Hotfi x 2028 8 pcs. SS 16 Indian Pink F 289

Flat Backs No Hotfi x 2028 6 pcs. SS 16 Olivine F 228

Flat Backs No Hotfi x 2028 3 pcs. SS 16 Sunfl ower F 292

Flat Backs No Hotfi x 2028 4 pcs. SS 34 Light Siam F 227

Flat Backs No Hotfi x 2854 1 pc. 8 mm Crystal Red Magma REDM 001

Flat Backs No Hotfi x 2854 3 pcs. 8 mm Light Rose 223

Supplies

1x Greeting Card, yellow, 14 x 20 cm Leather, red, 8 x 16 cm1x Pin back, gold1x Sheet of paper, yellow, transparent, A4

Tools

GlueLeather glueNeedleScissors1x Sheet of paper, A4Tooth pickTweezers

Level of design: BEGINNER

Have also a look at the text instruction at the last page!

5.7 cm

5.7 cm

STEP 1

3 /8 WWW.CREATE-YOUR-STYLE.COM

8 cm

8 cm

Step 2

x2

Glue

STEP 2

4 /8 WWW.CREATE-YOUR-STYLE.COM

Step 3

Step 4

Glue

Step 5

Glue

STEP 4

STEP 5

STEP 3

5 /8 WWW.CREATE-YOUR-STYLE.COM

4.5 cm 3 cm

1.2 cm

3 cm

1:2

I You4 cm

7.7 cm

I You

STEP 6

Scale 1:2

6 /8 WWW.CREATE-YOUR-STYLE.COM

x1

I You

I You

Step 8STEP 8

STEP 7

7 /8 WWW.CREATE-YOUR-STYLE.COM

I You

8 /8 WWW.CREATE-YOUR-STYLE.COM

STEP 1: Print and cut out the pattern in the illustration in this step to the size stated.

STEP 2: Cut two square 8 x 8 cm leather pieces. Glue the insides of both pieces together so the outside of the leather

shows on both sides. Press them down with a book until the glue is dry.

STEP 3: Attach double sided tape onto the pattern from step 1, stick it onto the leather piece and cut it out.

STEP 4: Remove the pattern from the leather and using tweezers apply SWAROVSKI ELEMENTS onto it in a random

pattern.

STEP 5: Glue the pin onto the backside of the heart as shown in the illustration.

STEP 6: Print out the text on yellow transparent paper as shown in the illustration in this step. Be careful that the

measurements are exactly the same. Fold it in half.

STEP 7: Pierce though the holes marked on the paper using a needle.

STEP 8: To get stability place a piece of cardboard into the paper as shown and attach the pin on the back of the

heart into the pierced holes.

CREATE YOUR STYLE with SWAROVSKI ELEMENTS Design Project

Valentine´s Day Greeting Card & Brooch “Sparkling Heart”