DEPARTMENT OF MECHANICAL ENGINEERING - G H … · SecondPrize Rs.15000/ Techkriti -2013 and ... participated SAE INDA BAJA-2014 at NATRAX , ... with 25 Member team in SAE INDIA organized

G. H. RAISONI COLLEGE OF ENGINEERING (An autonomous Institute under UGC act1956& Affiliated to RTM Nagpur University)

CRPF Gate No. 3, Hingna Road, Digdoh, Nagpur-440016

DEPARTMENT OF MECHANICAL ENGINEERING

Dr. P.V.Walke Dr. D. J. Tidke Head of Department Faculty Advisor

Members

Prof. N. P. Awate Prof. A.D. Pitale Prof. P.M.Wanjari Incharge-Dept News Letter

Editor (Students)

Mr. Pranit Gadgil Mr.Akshay Shelgaonkar Mr Ganesh Shinde

Year-03 Volume: 03 March -2014

Our Vision

To be recognized internationally for quality

education and research in mechanical

engineering with excellence in the fields of

design, manufacturing and thermal sciences.

Our Mission

To prepare professionally competent and

broadly educated mechanical engineers by

developing analytical and research abilities,

encouraging culture of continuous learning and

by adopting new technologies to solve complex

problems.

Programme Educational Objectives of

Department (PEOs)

The educational objectives of the Mechanical

Engineering programme are designed to

produce competent engineers who are ready to

contribute effectively to the advancement of

Mechanical Engineering causes and to

accommodate the needs of the profession. The

Mechanical Engineering Department is

dedicated to graduating mechanical engineers

who:

1. Shall practice Mechanical Engineering in the

general disciplines of design, thermal and

manufacturing engineering in industry and

establishments in government and private

sectors.



2. Shall apply fundamental technical knowledge

and skills to find workable solutions to

technological challenges and problems in

various areas of Mechanical Engineering.

3. Shall pursue advanced education, research

and development, and other creative

efforts in science and technology.

4. Shall conduct themselves in a responsible,

professional and ethical manner for the

benefit of the industry and society.

Programme Outcomes (POs)

The programme is targeted at developing the

following competencies, skills and abilities

amongst students. They shall be able to:

1. Acquire knowledge in the discipline of

mechanical engineering, apply

fundamentals of mathematics,

engineering and sciences and apply

technologies to solve complex problems

in inter and cross disciplinary areas.

2. Search out relevant technical

information, use analytical tools to

formulate problems and identify

workable solutions.

3. Design mechanical systems,

components, or processes to meet their

performance needs from considerations

of public health and safety as well as

cultural, societal, and environmental

issues.

4. Engage in R & D pursuits, set up and

conduct experiments, analyze and

interprete data using tools, techniques

and instrumentation in mechanical

engineering and interdisciplinary area.

5. Identify, formulate and solve mechanical

engineering problems using modern

design and manufacturing approaches

and computational and software tools.

6. Understand the responsibilities

associated with the use of technology &

processes on societal & legal issues of

concern in respect of health, safety and

culture.

7. Understand contemporary issues in

sustainable development and in

providing technology solutions

considering impact of economic, social,

political, environmental and global

issues.

8. Understand ethical and professional

issues and responsibilities in engineering

practice, creative enterprise, loyalty and

commitment.

9. Communicate effectively in written, oral

and graphical forms, provide

instructions and present the results in a

professional manner.

10. Possess knowledge of management

principles, project management and

finance, engineering materials, processes

and systems working to function

effectively, as a member or team leader,

in executing mechanical engineering

projects under diverse and

multidisciplinary environments.

11. Develop ability to engage in lifelong

learning, adapt new developments and

participate in continuing education

opportunities to remain active in the

profession and foster personal and

organizational growth.



Mechanical Engineering students got

third Prize in IMP -2014, at IIT Kanpur

Department of Mechanical engineering

student ‘s are demonstrate there project at

IIT Kanpur organized Project Competition

IMP- 2014

The students of Mechanical Engineering,

GHRCE Nagpur have participated in

prestigious event Innovation in Manufacturing

Practices IMP -2014 National Level

Innovative project Design Competition at

Indian Institute of Technology Kanpur in

association with Indian National Academy of

Engineer on 4th to 7 th March 2014 ,

Student of Mechanical Engineering Department

are demonstrate there develop machine . titled

“Design and Development castor seed

extraction Machine ” This machine is

developed by final year student Mr. Nitin

Galanede, Mr. Palash Madamwar . Mr. Swapnil

Malapure and Mr. Swapnil Chaudhary under the

guidance of Prof. Nilesh Awate, Assistant

Professor , Department of Mechanical

Engineering ,

In this innovative project competition all over

india top six project was selected for final

presentation at IIT Kanpur . The student of

GHRCE can represent there project with other

top five colleges IIT Kanpur , IIT Delhi, NIT

Jaipur, VIT Chennai , KVIT Tamilnadu. in this

completion. GHRCE got Third Prize of Cash

Rs.25000/- in this completion

Prof. Indranil Manna , Director IIT Kanpur ,

Chairperson, Evaluation Committee Vice

President INAE and other dignitaries are

appreciated the GHRCE student for developing

such kind of machine for the rural development

and reduce the tedious work of seed removal

process. .

GHRCE Project did hatric at IIT Kanpur,

won First Prize Rs.25000/ in Techkriti-2012,

SecondPrize Rs.15000/ Techkriti -2013 and

Third Prize Rs. 25000/- Techkriti- -2014 at IIT

Kanpur

Students from final year Mechanical

Engineering, have given credit of success to



Hon’ble Dr. P. R. Bajaj , Director, GHRCE ,

and Dr. P. V. Walke Head of Department,

Mechanical Engineering , and Prof. K.D. Joshi,

Coordinator IIP Cell GHRCE Nagpur.

Mechanical Engineering Team AXIOM

participated SAE INDA BAJA-2014 at

NATRAX , NATRiP , Prithampur .

Department of Mechanical engineering student ‘s are demonstrate there ATV at SAE INDIA BAJA-2014, Prithampur ,

The students of Mechanical Engineering,

GHRCE Nagpur have participated in

prestigious India’s Biggest ATV Event BAJA -

2014 National Level Off road Car making

(ATV making ) Competition at NATRiP

Prithampur , Indore, Madhya Pradesh INDIA

.This competition was organized by SAE

INDIA in association with Mahindra and

Mahindra.

Students of Mechanical Engineering

Department demonstrated their developed

Car in this competition. SAE Collegiate Club

GHRCE Nagpur ,Team AXIOM participate

with 25 Member team in SAE INDIA

organized BAJA-2014 at NaTRAX facility

National Automotive Testing and R&D

Infrastructure Project ( NATRiP) At

Prithampur Dist Indore. M. P Sate . In This

team consists Mr. N.P.Awate, Faculty Advisor

SAE Collegiate Club GHRCE Nagpur , and

Prof. A.D, Pitale, Additional Faculty Advisor,

SAE Collegiate Club GHRCE Nagpur along

with 24 students of Final year and third year

was participated in this event . The car was

built under the guidance of Prof. Nilesh Awate,

Faculty Advisor, SAE Collegiate Club GHRCE

Nagpur Department of Mechanical Engineering

.In this competition in BAJA aptitude test (

BAT) 5 student of GHRCE were shortlisted

in reputed company for HR and PI round

General motor, Cummins, Endurance, and

Mahindra and Mahindra . Mr. Ravindra

Pardeshi student of final year mechanical

engineering was finally selected in Cummins

India PVT.LTD as Associate Engineer in HR

meet held on 25 Feb2014. For Development of

this project college provide finical support to

team AXIOM of Rs.4,30, 000/-

Team member of Team AXIOM GHRCE

Nagpur and SAE Collegiate Club GHRCE

Nagpur, have given credit of success to

represent GHRCE car in this mega event to

Hon’ble Dr. P. R. Bajaj , Director, GHRCE ,

and Dr. P. V. Walke Head of Department,

Mechanical Engineering , and Prof. K.D. Joshi,

Coordinator IIP Cell GHRCE Nagpur.

http://www.natrip.in/

http://www.natrip.in/



One Day Workshop on “Manufacturing

Technologies in Solar Photo-Voltaic and

Gadgets Powered By Solar”

One day workshop on “Manufacturing

technologies in solar Photo-Voltaic and gadgets

powered by solar” was organized by Mechanical

Engineering department at G H Raisoni college

of Engineering, Nagpur under the aegis of Solar

Energy Society of India (SESI) on 20 March

2014. Mr.Mukesh Kartare, and Mr.Mehul Patel

faculty from ENELEK Power Private Limited,

Mumbai, conducted a workshop. Scope of

workshop includes the theoretical and practical

concept of solar related gadgets and the

demonstration of solar equipment. Workshop

was beneficial for Mechanical Engineering

students to understand the theoretical and

practical concept of solar energy. They have

explained many important topics related to

renewable energy in their talk. Information

provided to the students is also useful for

pursuing their further research in this upcoming

area. Experts had interaction session with the

students and have given valuable guidelines to

students about recent trends available in this

technology. 120 students of fourth and sixth

semester BE and second semester

M.Tech(HPE) were participated in the event .

Project Review Seminar of M.Tech (HPE)

conducted by External Expert in Mech.

Engg. Dept., GHRCE, Nagpur on 20March

2014



The department of Mechanical Engineering of

G.H.Raisoni College of Engineering, Nagpur

was conducted External Project Review Seminar

for M.Tech (Heat Power Engineering) on 20

March 2014. DR. S.B.Thombre, Professor and

Head (Mechanical Engineering), VNIT,Nagpur,

was invited as a Expert..Dr. P.V.Walke, HOD,

Mechanical Engineering, Dr.V.M.Kriplani

Professor.MechanicalEngineering,Dr.U.S.Wank

hede Dean R&D, Prof R.S.Shelke, Prof.

S.R.Karale ,Prof. A.D.Pitale were also present

for review seminar. Prof. V.W.Khond, was

coordinated activity. 17 M.Tech IV semester

(HPE) students were presented their

seminar.

Mechanical Engineering Department of

GHRCE organized 9th Board of Studies

Meet on 13th February, 2014.

To revise and finalize the new scheme for post

graduate studies and to discuss the content of

the revised syllabi, BOS Meet (9th BOS Meet)

was organized by the Department of Mechanical

Engineering, GHRCE on 13th February, 2014.

Dr.P.V.Walke HOD and chairman of BOS

welcomed the guest to the august house and

handed over the session to Dr. V.M.Kriplani.

Outside expert and academician Dr.D.V.Bhope

Chairman, BOS, Mechanical Engineering,

RTMNU, Nagpur, Industry expert Mr.Vivek

Vaidya Sr. Manager JSW-Ispat , Mr. Shrekhar

Jogwar Manager (Manufacturing) PIX

Transmission Ltd. were actively involved in this

meet. All internal experts were also present in

this meet.

Dr.P.V.Walke HOD and chairman of BOS

proposed formal vote of thanks at the end of

the programme.

Industry Advisory Committee Meet

conducted on Monday, 10th February, 2014 in

Mechanical Engineering Department

Dr. P. V. Walke, Professor & Head, Department of Mechanical Engineering, presided over the meeting which was attended by the faculty members of the Department and the following



esteemed industry executives were present for meeting

1. Mr Nitin Sudame, Executive Director, Spacewood Furnishers Pvt. Ltd, Nagpur

2. Mr Hemant Jawade, Managing Director, Anand Projects & Consultancy Services Limited, Nagpur

3. Mr. J. K. Wadhwan,,Managing Director, Epsillon Cables Pvt. Limited, Nagpur

4. Mr. Hemant Ambaselkar, President, Butibori Industries Association, Nagpur

5. Mr. Uday Kamat, Managing Director, Yash Agro Energy Limited, Nagpur

6. Mr. Gautam Mohanty, Assistant General Manager (Works), NECO Heavy Engg. & Castings Limited, Nagpur

Dr. D.J. Tidke proposed a formal vote of thanks. Guest Lecture organized for the students of

IInd Sem M. Tech. CAD/CAM and VIth sem

Mechanical Engineering

Mr. K. Pravin Kumar delivering guest

lecture to the students

Department of Mechanical Engineering has

organized the guest lecture on “Recent trends in

CAD/CAM” on Monday 10/03/2014 for the

students of M Tech CAD/CAM and VIth Semester

of the department. The lecture was delivered by Mr.

K. Pravin Kumar, CAE Engineer, Geometrics

Technologies Pvt. Ltd. and Nilesh Bhagat, Project

Head, Geometrics Technologies Pvt. Ltd.

Nagpur.About 60 students from VIth semester and

15 students from M. Tech. CAD/CAM attended the

lecture. He mainly focused on the product

development and the various stages involved in it.

He guided the students about the market

opportunities in CAD/CAM/CAE and discussed

that how the softwares are useful for their final year

major project.

The credit for organizing the guest lecture

goes to Dr. P. V. Walke, HoD Department of

Mechanical Engineering, Prof. Laukik Raut,

Assistant Professor, Prof. S. G. Borkar, , Assistant

Professor Department of Mechanical Engineering.

Paper Publish by Faculty

Title of paper: A Review of Various

Techniques Used for Shaft Failure Analysis

Name of Author:

Sumit P. Raut, Research Scholar, Department of

Mechanical Engineering,G. H. Raisoni College

of Engineering, Nagpur, India

Laukik P. Raut, Assistant Professor, Department

of Mechanical Engineering,G. H. Raisoni

College of Engineering, Nagpur, India

International Journal Details: International Journal of Engineering Research and General Science Volume 2, Issue 2, Feb-Mar 2014 ISSN 2091-2730



Documents

DEPARTMENT OF MECHANICAL ENGINEERING - G H … · SecondPrize Rs.15000/ Techkriti -2013 and ... participated SAE INDA BAJA-2014 at NATRAX , ... with 25 Member team in SAE INDIA organized