Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Version 2.0
Bartec is Europe's leading supplier of Veterinary Nuclear Scintigraphy
Equipment. Bartec provide new and refurbished Gamma cameras, processing
computer systems software and all the necessary accessories. Bartec also
offer building and preparation consultancy, installation and full user training.
Bartec is a privately owned UK company with over thirty years of experience
in the Nuclear Medicine and Nuclear Scintigraphy fields. Bartec are also the
main UK distributor for Biodex accessories.
Bartec Technologies Ltd
Unit 8, Stanhope Gate
Stanhope Road
Camberley
Surrey, GU15 3DW, UK
���� +44 (0) 1276 20842
Fax +44 (0) 1276 20891
Email [email protected]
Website: www.bartectechnologies.com
Version 2.0
Index Page
Bartec Gamma Camera Systems 4
Micas X Plus® Processing Systems 5
Syringe Shields 6
Vial Shields 7
Table Top Shields 8
Hazard Warnings 9
Radiation Monitors 10
Radiation Monitors 11
Dose Calibrator 12
Decontamination 13
+44 (0) 1276 20842 3
Bartec are able to source many items not listed in this catalogue,
please contact us for your special requests
Index
Version 2.0
Bartec Gamma Camera System
The Bartec Gamma Camera System is based on a new digital
system or a factory refurbished GE gamma camera detector and
electronics. The detector is installed on a yoke and mounted
onto a variety of transport systems including overhead Jib crane
gantries , overhead gantry hoists and custom hydraulic Crane
arms and stacker systems. The interconnecting detector cables
are routed in such a way as to ensure that there are no trailing
cables on the ground.
The detector is completely sealed to ensure that no body fluids
or contamination can enter. All units are designed for silent
operation to ensure minimise distress for the horse.
Jib Crane mounted
Refurbished GE camera Overhead crane mounted
Refurbished GE camera
Overhead crane mounted
New Digital Rectangular Camera
Version 2.0
MICASXPlus® Processing System
+44 (0) 1276 20842 5
The Bartec MicasXPlus® Processor is an
advanced Nuclear Medicine post processing
system that has been developed in the UK for
human imaging and has users all over the
world . The system contains specific
functionality for Nuclear Scintigraphy such as
Horse motion correction as shown.
The MicasXPlus® system provides all of the
procedures and functionality required for
today's Nuclear Scintigraphy.
Bartec has extensive experience in the field of Nuclear Scintigraphy and
is able to provide advice and consultancy for new and existing
projects. Bartec can also provide a complete package of camera,
processor, accessories, installation and testing, full training for the Users,
including health and safety and service on radiation protection matters.
Automatic Motion Correction Software Before and After Motion Correction
Version 2.0
Syr inge Shields
6 sales@bar tectechnologies.com
The barrel of the shield is constructed of 2 mm thick
tungsten that will reduce rad iation exposure from Tc-
99m by 94%. A 4.2 density lead glass window provides
protection and visibility. The interior of the barrel be-
hind the glass has a white coating that improves the
view of the syringe and contents. A bevel around the
lead glass helps protect it from scratching or breaking.
The Safe-T-Lock design grips and secures the syringe
upon insertion and will release the syringe at the press
of a button. Disposing used syringes is easy; invert the
syringe shield over a Sharps container, press the re-
lease button and the syringe freely disengages.
Pro-Tec III® Syringe Shields:
Syringe Shield, 5 ml 007-736
Syringe Shield, 10 ml 007-738
Pro-Tec III Syringe Shield Pro-Tec II Syringe Shield
The Pro-Tec® II is thin, lightweight and easy to use.
The barrel of the shield is constructed of 1.5 mm thick
tungsten that will reduce rad iation exposure from Tc-
99m by 94%. A 4.2 density lead glass window provides
protection and visibility. The interior of the barrel be-
hind the glass has a white coating that improves the
view of the syringe and contents. A clip secures the
lead glass to the tungsten barrel and makes it easy to
replace scratched or broken glass. A stainless steel
thumb screw holds syringes firmly in place.
Pro-Tec® II Syringe Shields:
Syringe Shield, 5 ml 007-900
Syringe Shield, 10 ml 007-909
Syringe Shield 20 ml 007-917
Replacement Glass for Pro-Tec® II Syringe Shields:
Syringe Shield Replacement Glass, 5 ml 127-789
Syringe Shield Replacement Glass, 10 ml 127-999
Syringe Shield, 5 cc
Syringe Shield 20 cc
Shielded Syringe Carriers
Safely stores and transports syringes, on site, with ei-
ther ⅛” or ¼” lead lining.
Syringe Carrier, Large, 3.2mm lead 001-179
Syringe Carrier, Small, 3.2mm lead 001-181
Version 2.0
Vial Shields
+44 (0) 1276 20842 7
• Virtually unbreakable
• Safe hand ling of rad ioactive liquids
The Tungsten Vial Shield is designed to greatly reduce
exposure to vials containing liquid radioisotopes. The
shield is constructed of .19" (.48 cm) thick tungsten,
equivalent to .38" (1 cm) lead at 150 keV.
Vials can be loaded from the top or bottom of the shield .
A loss-proof slide injection port on the top allows easy
access to the vial septum.
The tough tungsten will retain its shape under the
roughest hand ling and is virtually unbreakable.
Specifications
Dimensions: 3.7 x 7 cm
Inside Diameter: 2.5 cm
Lead Equivalency: .1 cm
Vial Shield, Tungsten, .38" lead equiv 053-805
Tungsten Vial Shield Colour Coded Vial Shields
Colour coding is the easiest way to avoid a mix up.
These vial shield colours match the C.I.S. kits and are
compatible with most rad iopharmaceutical vials. The
body of the vial is constructed of .31" thick lead covered
with a coloured acrylic collar.
A 4.2 density lead glass window provides protection
and visibility.
Vials can be loaded from the top or bottom of the shield .
The top features an attached slid ing lid for easy access
to the vial septum.
Specifications
Dimensions: 4.3 x 7.8 cm
I.D.: 2.7 cm
Lead Shielding: .0.8 cm
Weight: 0.9 kg
Color-Coded Vial Shields without glass:
Vial Shield, (Glucoscan), Red 053-601
Vial Shield, (Osteolite,) Purple 053-602
Vial Shield, (Pulmolite), Light orange 053-603
Vial Shield, (Pyrolite), Blue 053-604
Vial Shield, (Hepatolite), Brown 053-605
Vial Shield, (Microlite), Yellow 053-606
Colour-Coded Vial Shields with glass:
Vial Shield, (Glucoscan), Red 053-701
Vial Shield, (Osteolite), Purple 053-702
Vial Shield, (Pulmolite), Light orange 053-703
Vial Shield, (Pyrolite), Blue 053-704
Vial Shield, (Hepatolite), Brown 053-705
Vial Shield, (Microlite), Yellow 053-706
Version 2.0
Table Top Shields
8 sales@bar tectechnologies.com
• Constructed of lead and lead glass
• Integral stainless steel tray with spill proof lip
• Optional bottom and side shields available
Specifications
Table Top Shields
Lead Shielding: 0.64 cm thick
Dimensions: See d rawings featured .
Viewing Panel: 2.0 mm or 4.0 mm lead glass window
Side Shields
Lead Shielding: 0.64 cm thick
Tabletop Shields:
Shield, Table Top, Standard, .5" lead 042-216
With 2.0 mm lead glass
Tabletop Shield Lead Glass Panels:
Lead Glass Panels can be paired to achieve 4.0 mm lead
equivalency.
Lead Glass Plate, 2.0 mm, Standard 017-121
Side Shield, Standard, .25" lead 042-220
Bottom Shield, Standard, .125" lead 042-218
Standard Table Top Shield Mini Table Top Shield
• Constructed of lead and lead glass
• Integral stainless steel tray with spill proof lip
• Optional bottom and side shields available
Specifications
Table Top Shields
Lead Shielding: 0.64 cm thick
Viewing Panel: 2.0 mm or 4.0 mm lead glass window
Shield, Table Top, Mini, .5" lead 042-016
With 2.0 mm lead glass
Lead Glass Plate, 2.0 mm, Mini 017-810
Side Shield, Mini, .25" lead 042-221
Bottom Shield, Mini, .125" lead 042-018
Version 2.0
Hazard Warnings
Hazard Tape
Hazard tape is a highly visible Magenta and Yellow
warning tape that’s perfect for identifying physical
hazard areas. Constructed of 6ml vinyl, the tape is du-
rable to withstand long term placement.
The tape will adhere to any clean smooth surface.
Tape, Hazard 026-020
Warning Rope
• Brightly coloured—magenta and yellow
• Triple– strand strength
Made of high quality polypropylene, this triple strand
rope assues high visibility and strength.
Rope, Warning (price per foot) 121-072
Diameter 0.8 cm
Minimum order is 100’.
Metal Signs
Metal signs finished in heavy-duty baked enamel on
30-gauge steel with holes for convenient attachment to
inner or outer doors.
Caution radioactive materials 024-999
Caution radiation Area 024-900
Shipping Labels
Pressure sensitive with peel off backing.
Comply with fed eral Regulations, Title 49-
Transportation of Hazard ous Materials Regulations,
Dept. of Transportation, 49CFT, Part 173 as to wording,
symbols.
Label, Radioactive 1 white 20/pkg 030-001
Label, Radioactive 2 Yellow 20/pkg 030-002
Label, Radioactive 3 Yellow 20/pkg 030-003
9 +44 (0) 1276 20842
Version 2.0
Radiation Monitors
10
Personal Dosimeter DKG-21
Stand-alone use or use within the automated PC based system for personal dosimetry control.
Dose accumulation history storage in the non volatile memory with refer-ence to real time.
Dose accumulation history transfer to a PC computer through the integrated infrared port.
Power down prevention mode until all accumulated data has been read from the dosimeter.
Gamma radiation EDR and ED threshold levels programming using on-line to a computer, control keys, or manually.
The blocking of certain indication modes using computer commands on line.
Light and audio alarm of exceeded programmed threshold level of gamma radiation EDR and ED.
Automatic digital display switch off if current gamma background is lower than the preset threshold level and Instant switch on when: - any control key pressed; - the gamma background increases above the preset threshold level; - when the alarm clock rings. Periodic self testing (batteries, detector).
Energy compensated Geiger-Muller counter.
Measurement ranges and basic relative errors: Personal gamma radiation equivalent dose rate HP(10)
µSv/h 0.1…1 000 000; ±15%
Personal gamma radiation equivalent dose HP(10)
mSv 0.001…9 999; ±15%
Energy range of detected gamma and X-ray radiation and energy dependence
MeV 0.05…6.0; (0.05…1.25; ±25%)
Recording resolution of dose accumulation history in the non volatile memory
minutes 5…255
Time of data storage in the non volatile memory
years not less than 10
Data exchange rate through infrared port bit/s 38 400 Positive data exchange distance between the dosimeter and infrared port adapter
m not more than 0.3
Lithium battery (CR2450) life hours 2 200 Operating temperature range °C -10…+50 Weight kg 0.08 Dimensions mm 86×54×9
Radiation Monitor Terra
Five independent measuring channels with alternate indication of data on the single liquid crystal display. Built-in gamma, beta sensitive Geiger-Muller counter.
Prompt evaluation of gamma background within 10 seconds. Automatic subtraction of gamma background at measurement of beta contamination. Measurement results averaging, manually and automatically. Automatic setting of measurement intervals and ranges.
Audio indication of each detected gamma-quantum and beta-particle (with switch off option). Two-tone audio alarm of exceeded programmed threshold levels. Digital display backlight.
Two AAA size batteries. Power supply discharge indication.
Shock resistant frame.
Small weight and dimension parameters.
Features Features
Measurement ranges and basic relative errors:
Gamma and X-ray radiation equivalent dose rate (137Cs):
µSv/h 0.1…9 999; ±15%
Gamma and X-ray radiation equivalent dose (137Cs):
mSv 0.001…9 999; ±15%
Beta-particles flux density (90Sr+90Y):
1/(cm²·min) 10…100 000; ±20%
Equivalent dose accumulation time and accuracy of measurement:
1 min … 100 h; ±0.1 s per 24 h
Energy ranges of measurement and energy dependence:
Gamma and X-ray radiation MeV 0.05…3.0; ±25%
Beta radiation MeV 0.5…3.0; Threshold level programming reso-lution for: - dose rate - dose - flux density
µSv/h mSv
10³/cm²·min
0.01 0.01 0.01
Measurement time intervals seconds 1…70 Battery life hours 2 000 Operating temperature range °C -20…+50 Weight kg 0.15 Dimensions mm 120×52×26
sales@bar tectechnologies.com
Version 2.0
11 +44 (0) 1276 20842
Radiation Monitors
Thermo Scientific Mini 900 Survey Monitor
The Mini-monitor serves as a portable or bench top style radiation counter available with a variety of different
probes to accommodate radiation detection needs. Bartec offer this product with the Type 44A Scintillation
Probe for accurate detection of Tc-99m contamination in Veterinary Practices and Hospitals. The unit is packaged
in durable, lightweight aluminium case, powered either from it’s internal battery pack or from mains power. The unit
contains an internal constant current charger for its rechargeable batteries. Radiation Measurement read-out is on
a large easy to view logarithmically scaled meter. An alarm can be set to trigger at any User selected level on the
scale.
Specifications: Weight: 1 kg (2.2 lbs) Size: 180 x 110 x 165 mm (7” x 4.5” x 6.5”) Batteries: 6 type AA cells, alkaline (IEC LR6) or rechargeable (IEC KR 15/51) Battery Life: Approximately 300 hours at 4hours/day Paralysis Time: Scale corrected to give true reading Meter Integration Time: 1 to 4 seconds set to match counting rate Radiation detector: Type 44A Sodium iodide crystal (32 mm dia. by 2.5 mm thick) mounted on the front surface of the probe to facilitate monitoring of large contaminated areas. Suitable for a range of energies from approximately 15 keV to 250 keV. It is also beta sensitive for energies above 500 keV. Diameter 50 mm Length 180 mm. Aluminum window weight
14 mg cm-2. Radiation Detected: Gamma and X-Rays only Overload Protection: No meter “fallback” with intensities at least 100 times full scale reading Main Power: 12-18 VDC from mains converter unit
Version 2.0
Dose Calibrator
sales@bar tectechnologies.com
Atomlab 400 Dose Calibrator
Designed for facilities receiving unit
doses
Features at a glance:
• Large, easy to read backlit LCD
• Automatic range selection; ranges up to 40 curies of
Tc-99m
• Pre-programmed for 88 most commonly used
radionuclides
• Displays in curies or becquerels
• Small footprint for an economic workspace
• Ultra-fast response
• Self Diagnostic Software
• Remote Ionisation Chamber
• RS-232 bi-directional serial communications port
The RS-232 port enables the Atomlab 400 Dose Calibrator to communicate with most commercially available nuclear medicine management systems. The Atomlab™ 400 provides fast, accurate radionuclide activity measurements with performance that easily complies with the most stringent regulatory requirements. The unit is simple to operate. There is a routine list of ten pre-programmed isotopes plus another seven that can be user defined. Any four isotopes will be displayed at a time. The Atomlab™ 400 display can be mounted on a wall or placed on a desktop. In addition, there is a library containing 88 isotopes listed alphabetically, including Y-90 and Sr-89. Activity is displayed on an LCD panel in either Curie or Becquerel units. Background correction is performed at the touch of a button. Range selection is automatic. Activity measurements are performed by a microprocessor-controlled electrometer located within the detector assembly of the ionisation chamber. The chamber is shielded with .25" (6.3 mm) lead. It can be located up to eight feet away from the display unit. Chamber bias is generated within the display unit by an electronic high voltage supply, eliminating the need for
Dose Calibrator, Atomlab 400 , 230V 086-335
Includes Vial/Syringe Dipper and Well Insert
Optional Items
086-423 Moly Shield, Vial 0.3” lead
086-435 Moly Shield, Syringe 0.3” lead
086-509 Lineator
086-242 Vial/Syringe Dipper
086-241 Well Insert
12
SPECIFICATIONS Isotope Selection Keys: Ten pre-programmed – Tc-99m,
Co-57, Cs-137, I-131, In-111, Ga-67, Xe-133, I-123, Tl-201, and Mo-99; seven additional keys for user-set isotopes; two new isotope keys and a full alphabetical list of 88 isotopes Activity Range: 0.1 µCi to 40Ci (.001 mBq to 1500 GBq) of Tc-99m Energy Range: 25 keV to 3 MeV photons Response Time: One to two seconds for doses greater than 200 uCi; three seconds for doses greater than 20 uCi; 50-100 seconds below 20 uCi of Tc-99m with default threshold, threshold adjustable to reduce counting time Detector Linearity: ±1% or 0.2 µCi, whichever is greater Electrometer Linearity: ±1% or 0.2 µCi, whichever is greater Electrometer Accuracy: ±1% or 0.2 µCi, whichever is greater Overall Accuracy: ±3% or 0.3 µCi, whichever is greater; over-all accuracy is affected by such factors as the accuracy of the specific source calibration, geometric variations due to sample volume or configuration, detector linearity, electrometer accuracy and readout accuracy Repeatability: ±0.3% above 1 mCi short term (24 hr); 1% long term (one yr); exclusive of background Digital Calibration Dial: Four-digit LED dial display with increment/decrement keys to change the value; range is from 0.0 to 999.9 Detector: Well-type pressurized ionization chamber, with Argon fill gas; well opening 2.75" (7 cm), well depth 10.25" (26 cm)
Chamber Gas Pressure: 149KPa gauge (21.6 psig) at 20 degrees C or 250KPa absolute (36.3 psia) at 20 degrees C. IATA regulation 3.2.2.4 Exempts Gases of Division 2.2 from Dangerous Goods Regulations when transported at pressure less than 200KPa gauge (29 psig) at 20 degrees C. Device is shipped standard goods. Detector Shielding: .25" (6.3 mm) lead on all sides except top well opening; supplementary shielding available Chamber Bias: 355 ± 5 volts Environmental Operating Conditions: Temperature: 0-40° C Humidity: 0-90% rh, non-condensing Power Requirements: 100 to 240 VAC, 0.6 – 0.3 amps, auto switching; APS Power Supply (APS22ES-150160), for medical use Line Frequency: 50/60 Hz; detachable line cord; built-in EMI filter and transient suppression Detector and Interface Cables: 8' (243 cm) long, six conductor cables (two carry power, two for chassis ground, two carry serial data for digital I/O)
Display Unit: Dimensions: 6.75" w x 6" depth x 5" h (17.1 x 15.3 x 12.7 cm) Weight: 3.6 lb (1.64 kg); desktop or wall mountable Detector Unit: Dimensions: 6" dia x 15.5" h (15.24 x 39.37 cm) Well I.D.: 2.75" dia x 10.5" h (7 x 26.7 cm) Well I.D. with Liner: 2.5" dia x 10.25" h (6.35 x 26 cm) Lead Shielding: .25" thick (6.3 mm) Weight: 35 lb (16 kg)
Version 2.0
Decontamination
+44 (0) 1276 20842 13
Radiacwash has been in use since 1951 it is the most
popular general-purpose decontamination solution
specifically created for the fast and safe removal of
liquid rad ioactive contaminants. Firstly, it sequesters
metallic ions, which contaminate surfaces. Secondly, it
lifts up and firmly suspends contaminating particles.
Allowing contamination to be absorbed and then
rinsed away with water.
Radicawash, Spray Mist, 1 L bottle 005-400
Radiacwash, Bottle 1 gal* 005-100
Radiacwash, carboy w/spigot, 5 gal* 005-105
Radiacwash, drum, 55 gal* 005-155
*US gallon
Radiacwash
Radiacwash Towelettes
Radiacwash Towelettes are the most efficient and safest
way to remove rad ioactive contamination from hands
and small objects. Simply remove the towelette from the
foli packet, scrub hands thoroughly and wash the con-
tamination away with running water.
Radicawash, Towelettes 100/box 005-300
Decontamination kit
The Atomlab Decontamination Kit contains all the
equipment needed to cope with a rad ioactive spill or
routine decontamination problem in the laboratory.
The d rum serves as a container for the kit components
and as waste transfer/storage vessel.
Contents of Kit
Quantity Cat No Item
1 - 30 gallon fibre d rum
2 prs 118-125 Large coverall
2 prs 119-200 Shoe covers
2 120-530 Respirators
4 120-750 Filters
2 prs 034-005 Gloves
1 gal 005-100 Radiacwash
1 box 005-300 Radiacwash Towelettes
1 bottle 005-400 Radiacwash spray Mist, 1 Litre
10 040-108 Poly Bags
1 001-012 12” Niptong
1 ea Sponge, mop,scrub brush, pail,
rope,assorted signs
Decontamination Kit 121-180
Bartec Technologies Limited, Unit 8, Stanhope Gate, Stanhope Road, Camberley, Surrey, GU15 3DW, UK.
Tel: 01276 20842 • Fax: 01276 20891 • [email protected] • www.bartectechnologies.com
Bartec Technologies Ltd, Avenue des Mouettes 14, Bruxelles 1150, Belgium.