Embed Size (px)
Citation preview
FS 52067QUALITY ISO9001
AS/NZS 4347
A Skellerup Industries Company
Dekstrip® Flashing
Large round or square penetrations
Skylights
Bullnose
Valleys
Box Gutters
Flashes hi-rib & standing seam profiles
Stretch and form to fit and seal
Flash between dissimilar materials
Handles vibration and expansion
Twenty year warranty Just fit it and forget it – we’ve got you covered
to solve all those flashing problems! ® Dekstrip expandable-edge flashing is the answer to flashing large, curved or
awkward profiles and penetrations. It’s ideal for square ducts, chimneys andskylights and is the fast, easy and most effective way to flash a bullnose.
®
EXCLUSIVE‘CONCERTINA’
EDGES STRETCHUP TO
25%
Expandable edged
Dekstrip forms and stretches
TMBSI
CHECK THE BENEFITS!
Distributed by: BEST MATERIALS LLC, Phoenix AZPh: 800-474-7570, 602-272-8128 Fx: 602-272-8014 www.BestMaterials.com Email: [email protected]
A Skellerup Industries Company
Dekstrip® Flashing
DS23-180 23m or 75’ 180mm or 7”
DS23-235 23m or 75’
DS23-305 23m or 75’
DS15-450 15m or 49’
DS10-180 10m or 32’ 180mm or 7”
DS10-235 10m or 32’ 235mm or 9”
DS10-305 10m or 32’ 305mm or 17”
Code No Length Width
Separate strip of aluminium included in all boxes.Go to www.deks.com.au for more detailsed installation instructions.
DS10-305 3.1m or 10’ 235mm or 9”
235mm or 9”
305mm or 12”
450mm or 17”
Colour
GREYThermoplasticElastomiserwill withstandtemperaturesof up to120 C / 248 F
Expand one edgeand use separatestrips, lapped andjoined, to seal aroundthe penetration.
Flash round pipes in onego, stretching the loweredge to fit. Join usingfasteners, sealant and/orheat gun.
Dekstrip is compatiblewith most materials andcan successfully flashbetween:
®
Square Ducts, Chimneys, Skylights
Large Round Pipes
After installation, and preferably after a periodof ‘weathering’, Dekstrip can be painted withany good quality 100% acrylic paint afterpriming with an expoxy resin-based primer.
®
The flexibility of Dekstripmakes it ideal for joiningbox guttering. Ezi-strip is required forinstallation. (Code EZISTRIP).
®
Expansion Joints
• Brick• Fibre Cement• Galvanised Steel• Aluminium• Stainless Steel• Concrete
Easy to fix
When flashing dissimilarroof profiles such as ahouse roof to a verandah,install as follows:
1. Junction gap should be no more than 180mm.2. Measure length.3. Stretch to suit profile on both sides.4. When satisfied with the shape and fit and there are no stress lines, seal with Butyl Mastic Sealant then screw/rivet fix in the valley/pan of the profile.
Flash Dissimilar Materials Flash Dissimilar Roof Profiles
oo
Sealant
Because of the unique properties of TPE,Deks recommends Butyl Mastic as a sealentin all applications.
Paint to Match Roof
