Upload
georgia-hampton
View
256
Download
5
Tags:
Embed Size (px)
Citation preview
Date: 04/19/23File: MC-SMO-SYS_10.1
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Connecting HMI Systems
Date: 04/19/23File: MC-SMO-SYS_10.2
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
HMI Components with SIMOTION
Operator Panel
SIMATIC Operator Panel OP 170B
SIMATIC Touch Panel TP 170B
SIMATIC Multi Panel MP 270/MP 370
SIMATIC Panel PC 577/677
SIMATIC Panel PC R
Configuration using WinCC flexible orWinCC flexible
OPC as standard interface
Date: 04/19/23File: MC-SMO-SYS_10.3
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Integrating WinCC flexible into a SIMOTION Project
Connectable variables:
PROFIBUS DP/Ethernet
HMI (WinCC flexible RT)D435
Data exchange
Requirements:WinCC flexible
integrated in STEP 7System Variables
Technology objects
SIMOTION device
Global User Variables
I/O variables
Device-global variables
Unit variables
Date: 04/19/23File: MC-SMO-SYS_10.4
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Creating a WinCC flexible Object in the SIMATIC Manager
3. Select device,4. device version
and5. Press "OK"
1. Open project in the SIMATIC Manager
2. Insert SIMATIC HMI
7.2.0.0
Date: 04/19/23File: MC-SMO-SYS_10.5
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
2. Double click
3. Double click "HMI MPI/DP"
1. Select"HMI Station"
Opening HW Config for HMI Station
Date: 04/19/23File: MC-SMO-SYS_10.6
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
6. Insert address "1"
5. Select PROFIBUS(1)- Subnet
4. Open "Properties“
7. Press "OK"
Configuring the PROFIBUS Connection
Date: 04/19/23File: MC-SMO-SYS_10.7
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Shortcut menu:"Open Object"
WinCC flexible ES
Project window
Work areaTools
Output / property window
Starting the Engineering System WinCC flexible
Date: 04/19/23File: MC-SMO-SYS_10.8
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Name of the connection Active: On Communication
Station / Partner Online: on
Configuring Communication Partner for the HMI Station
Date: 04/19/23File: MC-SMO-SYS_10.9
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
1. Select "Tags"
4. Select SIMOTIONvariable
3. Open symbol browser
2. Select connection
Creating Process Variables with WinCC flexible
Date: 04/19/23File: MC-SMO-SYS_10.10
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Insert / open screen
Screen editor
Tools
Creating Screens with WinCC flexible
Date: 04/19/23File: MC-SMO-SYS_10.11
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
1. Insert IO-field
2. Open "Properties"
3. Select tag4. Specify additional
settings
Inserting Input/Output Fields in a Screen
Date: 04/19/23File: MC-SMO-SYS_10.12
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Start screen
Device settings
Defining the Start Screen with WinCC flexible
Date: 04/19/23File: MC-SMO-SYS_10.13
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
2. Select HMI Station
3. Select MPI/DP Mode
4. Enter address: 1
5. Transfer in Flash
6. Start Transfer
1. Open "Transfer Settings"
Configuring Properties for Download
Date: 04/19/23File: MC-SMO-SYS_10.14
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Defining Download Settings on the HMI Device
Transfer Settings
CHANNEL Directories
XOK
Advanced
Enable Channel
Remote Control
Serial:
Channel 1:
Enable Channel
Remote Control
Channel 2:
MPI
S7 Transfer Settings XOK
Properties...
MPI
PROFIBUS
System control
Transfer
PROFIBUS XOK
Address:
Station Parameters
Panel is the only master on bus
1STime-out:
Transmission Rate:
NetworkParameters
126Highest Station:
1
1.5 Mbits/s
DPProfile:
Loader B6.0.2.16
Transfer
Start
ControlPanel
Date: 04/19/23File: MC-SMO-SYS_10.15
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Save
Start Transfer
Transfer status
Transfer Settings
Saving and Transfering the Project Data
Date: 04/19/23File: MC-SMO-SYS_10.16
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Technical Restrictions for Use with Clock-Synchronous PROFIBUS
Deactivate cyclic operation
0.7 ms for OP
Transfer SettingsCHANNEL Directories
XOK
Advanced
Enable Channel
Remote Control
Serial:
Channel 1:
Enable Channel
Remote Control
Channel 2:MPI
Deactivate remote control
Connections
Date: 04/19/23File: MC-SMO-SYS_10.17
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
OPC Server (OLE For Process Control)
OPC Server is included in the scope of delivery of the SIMATIC NET communications software
Standardized, open, manufacturer-independent interface
Supports integration of automation systems from different manufacturers
Connection of OPC-capable Windows applications to S7- and S5-compatible communication
Can be reached from every computer in the LAN/WAN (via COM/DCOM)
On-demand client/server communication
OPC Scout with browser functionality as OPC client
Date: 04/19/23File: MC-SMO-SYS_10.18
SIMOTIONSiemens AG 2008. All rights reserved.
SITRAIN Training for Automation and Drives
Connecting SIMOTION to WinCC
PROCES S FIELD BUSPROCES S FIELD BUS
Powerful Process Visualization on Windows Basis• Efficient, user-friendly configuration
• Common database, uniform operator philosophy
Scalability• Both hardware and software
• Single-user to multi-user system
Open system architecture• OPC, OLE, ODBC, SQL, ANSI-C, ActiveX
• Open for branch-specific extensions