3
Data sheet Presence and motion detectors compact office 24V Lux Presence detectors Article number: 2014001 Subject to technical changes and misprints additional information at: www.theben.de/product/2014001 12.03.2015 Page 1 of 3 compact office 24V Lux Article number: 2014001 Description Presence detector (PIR) Square detection area Mixed light measurement Light switch output (relay, potential-free) Presence switch output (relay, potential-free) Automatic lighting control as well as analogue value output of measured brightness Lighting control with light threshold value and self-learning switch-off delay Pulse function for staircase time switch Linear or logarithmic output of brightness Can be used as light sensor for PLC controls The pulse function is for controlling a staircase time switch The analogue output exports the brightness measured by the internal sensor as an analogue signal. The output of the analogue signal can either be linear or logarithmic to the measured brightness. The output functions independently from the presence detector The switching behaviour of the presence detector is controlled by presence and light. The self-learning switch-off delay adjusts to occupants' behaviour The presence detector has mixed light measurement and is suitable for switching the following types of lamps: fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs The square detection area allows accurate and simple planning Test operation mode checks the detection area and installation The parameters can either be set using the potentiometer or via the optional service remote control SendoPro 868-A Technical data Operating voltage 24 V AC/DC Recommended installation height 2 – 3 m Installation type Ceiling installation Power consumption 0,5 W Light measurement Mixed light measurement Setting range brightness 10 – 1500 lx Light switch-off delay Impuls (0,5 s), 10 s-20 min Type of contact light Relay potential-free Lamps Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs Compact and flourescent lamps 50 W (24 V AC/DC), 460 VA (230 V AC), µ, min. 1 V/1 mA Type of connection Screw terminals Max. cable cross section 2 x 2,5 mm² Mounting plate 70 x 70 mm Size of concealed housing Ø 55 mm (NIS, PMI) Ambient temperature +0 °C … +50 °C Type of protection IP 40 (when fitted)

Data sheet - compact office 24V Lux

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Data sheet - compact office 24V Lux

Data sheet Presence and motion detectorscompact office 24V Lux Presence detectorsArticle number: 2014001

Subject to technical changes and misprints

additional information at:www.theben.de/product/2014001

12.03.2015Page 1 of 3

compact office 24V Lux Article number: 2014001

Description■ Presence detector (PIR)■ Square detection area■ Mixed light measurement■ Light switch output (relay, potential-free)■ Presence switch output (relay, potential-free)■ Automatic lighting control as well as analogue value output of measured

brightness■ Lighting control with light threshold value and self-learning switch-off delay■ Pulse function for staircase time switch■ Linear or logarithmic output of brightness■ Can be used as light sensor for PLC controls

■ The pulse function is for controlling a staircase time switch■ The analogue output exports the brightness measured by the internal

sensor as an analogue signal. The output of the analogue signal can eitherbe linear or logarithmic to the measured brightness. The output functionsindependently from the presence detector■ The switching behaviour of the presence detector is controlled by

presence and light.■ The self-learning switch-off delay adjusts to occupants' behaviour

■ The presence detector has mixed light measurement and is suitable forswitching the following types of lamps: fluorescent lamps (FL/PL), halogenand incandescent lamps as well as LEDs

■ The square detection area allows accurate and simple planning■ Test operation mode checks the detection area and installation■ The parameters can either be set using the potentiometer or via the optional

service remote control SendoPro 868-A

Technical data

Operating voltage 24 V AC/DC

Recommended installation height 2 – 3 m

Installation type Ceiling installation

Power consumption 0,5 W

Light measurement Mixed light measurement

Setting range brightness 10 – 1500 lx

Light switch-off delay Impuls (0,5 s), 10 s-20 min

Type of contact light Relay potential-free

Lamps Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs

Compact and flourescent lamps 50 W (24 V AC/DC), 460 VA (230 V AC), µ, min. 1 V/1 mA

Type of connection Screw terminals

Max. cable cross section 2 x 2,5 mm²

Mounting plate 70 x 70 mm

Size of concealed housing Ø 55 mm (NIS, PMI)

Ambient temperature +0 °C … +50 °C

Type of protection IP 40 (when fitted)

Page 2: Data sheet - compact office 24V Lux

Data sheet Presence and motion detectorscompact office 24V Lux Presence detectorsArticle number: 2014001

Subject to technical changes and misprints

additional information at:www.theben.de/product/2014001

12.03.2015Page 2 of 3

Connection example

Detection range

Mounting height(A) Sitting (S) Walking (T)

2 m 9 m² | 3 m x 3 m 20 m² | 4,5 m x 4,5 m ± 0,5 m

2,5 m 16 m² | 4 m x 4 m 36 m² | 6 m x 6 m ± 0,5 m

3 m 20 m² | 4,5 m x 4,5 m 49 m² | 7 m x 7 m ± 1 m

3,5 m – 64 m² | 8 m x 8 m ± 1 m

Scale drawings

Page 3: Data sheet - compact office 24V Lux

Data sheet Presence and motion detectorscompact office 24V Lux Presence detectorsArticle number: 2014001

Subject to technical changes and misprints

additional information at:www.theben.de/product/2014001

12.03.2015Page 3 of 3

Accessories

Surface frame compact■ Article number: 9070514

Details ▶ www.theben.de

SendoPro 868-A■ Article number: 9070675

Details ▶ www.theben.de

clic■ Article number: 9070515

Details ▶ www.theben.de

Ceiling installation box 73A■ Article number: 9070917

Details ▶ www.theben.de

QuickSafe■ Article number: 9070531

Details ▶ www.theben.de