Company Profi le

SWITCHBOARDTelephone Fax +39 0422 2083 +39 0422 800234

FOREIGN COMMERCIAL SECRETARY OFFICETelephone Fax e-mail+39 0422 208311 +39 0422 800234 export@daliform.com

TECHNICAL SECRETARY OFFICETelephone Fax e-mail+39 0422 208350 +39 0422 800234 tecnico@daliform.com

Daliform Group works in compliance with the strictest International Standards

in terms of Quality UNI EN ISO 9001, Environment UNI EN ISO 14001,

Safety BSI OHSAS 18001 and Social Responsibility SA 8000.

Daliform Group products are produced in compliance with the highest quality

standards and have numerous product certifi cations and tests:

• BBA - Technical Approvals for Construction.

• Technical Construction Certifi cate issued by the Technical and Test Institute

for Constructions Prague (Czech Republic).

• Technical Construction Certifi cate issued by the Agency for Quality Control

and Innovation in Building (Hungary).

• Hygienic Certifi cate issued by the National Institute of Hygiene (Poland)

• Fire Resistance Certifi cate REI 180 for U-Boot Beton® issued by the CSI

institute in Bollate (MI).

• Certifi cation of a Load Test on an Attic with U-Boot Beton® issued by the

University of Darmstadt.

• Acoustic check for the verifi cation of DIN standards.

• Avis Technique issued by the French institute CSTB. • Rupture load tests certifi ed by the University of Padua.

Daliform Group, which is extremely precise with regard to respecting health and environment, fi rst obtained Environmental Compatibility

Certification (CCA) for its products and became a member of the Green Building Council Italia.

Daliform Group srl was established in 2009 with the goal of inheriting

the prestigious and exclusive patrimony of knowledge and skills

from Daliform srl of Pordenone, which has been characterised since 1993

by its ability to create advanced construction products in recycled

products in order to fi nally resolve the problem of rising humidity as well as

the concentration of Radon gas emerging from the subsurface.

This entrepreneurial initiative was initiated in the early 90's due to a law from the

Region Friuli Venezia Giulia (number 44 dated 23 August 1985) that, for the fi rst

time in Italy, regulated in detail the obligation to use ventilated under-fl oor cavities

due to the strong concentration of Radon gas in the region.

In comparison to traditional implementations (low walls and hollow blocks or

attic) Daliform srl proposed its own innovative and revolutionary system of IGLU’

formworks that was met with clamorous success in a short period of time.

Today, Daliform Group, is a leading company in creating and manufacturing

plastic products for the construction industry.

With its highly qualifi ed team of engineers, the company continues being

“a breeding ground of widely successful innovations”; innovations that have

considerably improved construction methods over the past two decades

with particular reference to ventilated under-fl oor cavities (IGLU’® and

ATLANTIS, lightened bidirectional (U-BOOT BETON®) and single-direction

(U-BAHN BETON®) slabs to vehicle accessible lawns (PRATOPRATICO®,

E.C.O. Pratopratico®, Easy Park®, Easy Ride). Daliform Group is always in

the forefront, ready to enthusiastically take on tomorrow's challenges.

History

Certifi cations

Partner of GBC Italia.

Our dream is our work: offering innovative systems and excellent products

for the construction industry.

We want to help everyone working in construction to do it better, more

effi ciently and more attractively, improving the quality of life.

We want to be the point of reference in the construction industry for those

who design, distribute and construct.

An innovative company that spreads a culture of excellence by offering the

best products and best solutions for the environments in which we live, work

and enjoy ourselves.

The love for what we do, our respect for our customers, the valorisation of

people, the passion for intense excellence intended as the love for quality,

beauty and work done well.

Search for growth, that lasts over time and respects the environment and

sustainability.

1) Customers (resellers, builders, users, designers, commissioning entities...)

2) Staff

3) Suppliers

4) Community

5) Company structure.

Mission

Vision

Values

Stakeholders

All of the products from the Daliform Group are the result of research,

intuition and field experience.

The skill and knowledge of our technical staff, which is constantly committed to

searching for innovative ideas and solutions to offer the market has permitted

the Daliform Group to develop products that have always successfully

anticipated the evolving requirements of the construction market.

Continuous research and technological innovation, in combination with the

optimisation of the proposed solutions, lead to an appreciated partnership

with our customers.

An additional successful aspect of the Daliform Group is its customer

orientation. Our tireless commitment is to satisfy in all ways those who placed

their trust in the company, meeting their need in advance, supporting them in

their growth and pursuit for success.

All of this is possible thanks to a valuable sales team, a sales network

consisting of qualifi ed professionals who are experts in the problems and

dynamics of the construction industry and able to offer with great reliability

quick, effective and economic solutions.

The Daliform Group engineering service is available to our customers (designers,

companies, resellers, commissioning entities) for planning, coplanning, feasibility

studies, comparative and cost analyses. Dimensioning, issuing of tests and

certifi cations.

Estimates, calculations and plans for placing our products. On site assistance.

Research & Development

Production

Sales organisation

Engineering service

The company's productive centre is concentrated in the Gorgo plant in M.no

TV and covers a surface area of 10,000 m2 with 13 modern production

lines for the traditional injection moulding and air moulding of thermoplastics,

with a variable tonnage between 190 t and 2800 t. The overall control is

entrusted to one of the most modern and effective programming, scheduling

and monitoring IT systems for the productive and logistic system in order to

guarantee timely deliveries on a just in time basis.

Our technical staff is highly specialised and our in-house staff is highly

educated. Professional training is constantly followed with update courses.

Systems for the creation of ventilated cavities:

- in the building foundations (between the land and the building) to counteract

the rising moisture and the presence of Radon gas;

- between land and perimetral walls of the building to counteract the contact

humidity and to protect the waterproofi ng level;

- in roofs (pitched and fl at ones) to counteract the formation of condensation

and the effects of solar irradiation;

- In fl at roofs used to create roof gardens (decreasing of weight to the

structure underneath);

- on the fl oor: for the creation of environments to control humidity and

temperatures (cold storage, food warehouses, cellars, drying cells).

Systems for the creation of cavities for the passage of installations (H20,

electricity, TV-SAT, PC, gas).

Systems for the creation of a cavity below sidewalks and bycicle paths to

prevent the tree roots from breaking through the road level.

Systems for the creation of fl oating fl oors with the possibility of inspection

points.

Systems to compensate (or create) gaps of quotes, with minimum weight on

the fl oor (or on the structure underneath).

Systems for creating raised platforms and ramps for boarding on trains and

subways ; “dock openings” for logistic centers.

Systems for thermal-acoustic insulation of buildings.

Systems for lightened slabs (without disarm) for the formation of curbs and

foundation beams.

Systems for the creation of bidirectional concrete cast-on-site lightened

slabs, for beams and foundations.

Systems for the creation of single-direction reinforced concrete cast-on-site

plates.

Spacers for positioning of reinforcement, formwork spacers, systems to

splice and watertight; leveling tools for prefabricated construction; shooting

boxes, protective caps for protruding reinforcement, various accessories.

Systems for the creation of sites of bio-fi ltration and deodorization.

Systems for the creation of composting sites.

Systems for the creation of sites for the stabilization of wastes.

Systems for the creation of structures having controlled climate under-

pavements.

Systems for the creation of structures for the collection and treatment of

leachate.

Construction Division

Environment Division

Systems for the creation of underground tanks (and driveway) for the

collection, storage and reuse of rainwater.

Systems for the creation of underground tanks (and driveway) for the

collection and dispersion of rainwater.

Systems for the creation of underground tanks (and driveway) for the storage

of saline water (desalinator).

Systems for the creation of underground compensation tanks (and driveway).

Systems for the creation of underground tanks (and driveway) for infi ltration

of rainwater into the ground.

Systems for the creation of underground tanks (and driveway) for the fi ltration

or treatment of water in general.

Water Division

Systems for the creation of driveways parking areas, grass or gravel fi nish.

Systems for the formation of vertical green.

Permanent or temporary protection systems for existing turf.

Systems for contrast and protection against runoff and erosion phenomena

in slighlty scope surfaces.

Consolidation and stabilization systems for equestrian foundations (or

surfaces crossed by animals in general).

Green Division

DG

_CI

- R

ev.

05

/03

-13

Tel. +39 0422 2083 - Fax +39 0422 800234

export@daliform.com - www.daliform.com

Via Serenissima, 30 - 31040

Gorgo al Monticano (TV) - Italy

Partner of GBC Italia.