1. Catalog DA 65.10 2003/2004vector controlSIMOVERT
MASTERDRIVES VC Single-Motor and Multi-Motor Drives 0.55 kW to 2300
kW
2. Configuring with PATH PlusWith the PATH Plus program,
Menu-guided selection and dure to guide the planning traversing and
hoistingthree-phase drives fed by layout of the frequency con-
engineer towards a repro- gear,frequency converters for verters
enable the system ducible and economically slewing gear,SIMOVERT
MASTER- components and the motors efficient drive
configuration,DRIVES Vector Control and necessary for a specific
drive starting with the mechanical spindle drives,Motion Control
units can be task to be determined. Auto- requirements of the
machine center winders andconfigured easily and quickly. matically
displayed informa- and the drive task involved. tion makes
fault-free plan- The technical data of the fre- thrust crank.The
program is a powerful ning possible. quency converters and
mo-engineering tool which sup- PATH Plus also includes a tors, the
selected systemports the user in all stages of A comprehensive help
sys- comfortable graphic display components and the
neces-configuration - from power tem also supports the first- for
showing sary accessories are listed insupply to the motor. time
user of the program. detail. torque, speed, output, PATH Plus
provides a logical and easy-to-use dialog proce- PATH Plus enables
drives to current, velocity and accel- be configured on the basis
of eration versus time and a load characteristic or a load torque
versus rotational cycle and enables planning speed. of applications
such as the following: Supply harmonic disturbanc- es can also be
calculated and graphically displayed. The planning and configuring
results can be stored, printed out or copied to other user programs
via the clipboard. PATH Plus is available with either a German or
English user interface. You can download the demo version of PATH
Plus from the following Internet ad- dress: http://www.siemens.com/
motioncontrol (products&systems/drive systems/software) or use
the fax form attached to the catalog. If you need the full version
of PATH Plus, contact your local Siemens office and quote the
following order number: 6SW1710-0JA00-2FC0 You will find the
address in the appendix to this catalog.
3. SIMOVERT OverviewMASTERDRIVES 1Vector Control0.55 kW to 2300
kW System DescriptionCatalog DA 65.102003/2004 2Supersedes:Catalog
DA 65.10 2001 6SE70 Compact PLUS Units Selection and Ordering
DataThe products in this catalog 6SE70 Compact and Chassis Unitsare
also included in theCD-ROM catalog CA 01Order No.:
3E86060-D4001-A100-B9-7600Contact your local Siemensrepresentative
for further 6SE71 Cabinet Unitsinformation. 4 Documentation and
Training 5The products andsystems described in Engineering
Informationthis catalog are manu-factured under appli-cation of a
qualitymanagement system 6certified by DQS inaccordance withDIN EN
ISO 9001 andDIN EN ISO 14001.The DQS Certificate isrecognized in
all EQ Net Dimension Drawingscountries. 7s Appendix Index A
4. Note! The technical data is intended for general
information. Please observe the operating instructions and the
references indicated on the products for installation, operation
and maintenance. SIMADYN, SIMATIC, SIMATIC HMI, SIMODRIVE,
SIMOLINK, SIMOREG, SIMOVERT, SITOR, STEP STRUC and USS are, Siemens
registered trademarks. All other products and system names in this
catalog are (registered) trademarks of their respective owners and
must be treated accordingly. The technical data, selection and
ordering data (Order Nos.), accessories and availability are
subject to alteration. All dimensions in this catalog are stated in
mm. Siemens AG 2003
5. Vector Control 1 Overview 1/2 Application List of contents
1/4 Unit and system components 1/6 Electronic and software options
Order number examples 1/8 Compact PLUS units Compact and chassis
units 1/8 Cabinet units Siemens DA 65.10 2003/2004 1/1
6. SIMOVERTr MASTERDRIVES Vector Control SIMOVERT MASTERDRIVES
Vector Control1 Overview Overview 1 Compact PLUS/compact and
Compact PLUS/compact and Applications chassis units cabinet units
chassis units cabinet units Applications Top solutions with
Depending on the appli- the possibility of reactive They can be
combined in SIMOVERT MASTERDRIVES SIMOVERT MASTERDRIVES Designed
for world-wide Quality in accordance with engineered drives cation
and the required power compensation many ways and arranged with
water-cooling for electromagnetically use DIN ISO 9001 output,
there are four types four-quadrant operation. side by side to match
every harsh environments compatible in any environ- The SIMOVERT
MASTER- The SIMOVERT MASTER- The quality standards of housing
design avail- possible drive requirement. ment DRIVES Vector
Control The units are designed as: The compact and chassis DRIVES
satisfy the relevant according to which the able: the Compact PLUS
converters and inverters are The SIMOVERT MASTER- international
standards and SIMOVERT MASTER- frequency converters are converters
for connection Being system modules, they unit, the compact unit,
the also available with water- DRIVES frequency conver- regulations
from the DRIVES are manufactured voltage-source DC link to a
3-phase AC system can be used to create the chassis unit and the
cabi- cooling. By installing in ters comply with the rele- European
EN standard and are high and have been converters with fully
digital inverters for connection to most suitable drive system, net
unit. appropriate cabinets, high vant EMC standard for pow- IEC to
UL and CSA. acclaimed. All aspects of technology and IGBT inver- a
DC bus whether this involves single The hardware and software ters
which, in conjunction rectifier units for supplying drives or
multi-motor drives. degrees of protection are er electronics.
production, i.e. develop- modules enable tailored achieved in a
closed system, ment, mechanical design, with Siemens three phase
power to the DC bus. EMC compliant installation and cost effective
drive thus making them suitable manufacturing, order pro- AC
motors, provide high- Customer-specific solutions enables them to
be used in solutions. A wide spectrum of system for use in any
harsh industri- cessing and the logistics performance, economical
industry and residential components and access- Cabinets and system
al environment. supply center of the drives for all industrial sec-
As a counterpart to ex- buildings. ories rounds off the range of
configurations for power SIMOVERT MASTER- tors and applications.
tremely high-performance products. output ranges from 0.55 kW New!
DRIVES, have been certified VC control on the motor to 6000 kW can
be created The Compact PLUS series by an independent authority
SIMOVERT MASTERDRIVES side, the SIMOVERT SIMOVERT MASTERDRIVES to
match specific customer in accordance with system-based drive
MASTERDRIVES AFE (Ac- The youngest member of The tailored solution
requirements, with either air- DIN ISO 9001. technology tive Front
End) unit ensures the SIMOVERT MASTER- cooling or water-cooling in
A uniform, modular series optimum energy supply on All SIMOVERT
MASTER- DRIVES Vector Control fami- our application workshop.
Engineering technology of standard units the line side as well with
its DRIVES share a consistently ly with power outputs of active,
line-angle-oriented uniform design. Throughout Examples of such
applica- with maximum benefit to The SIMOVERT MASTER- 0.55 kW to
18.5 kW rounds vector control. SIMOVERT the whole power range, the
tions are the customer DRIVES Vector Control off the product range
in the MASTERDRIVES AFE units units (converters, inverters)
multi-motor drives (steel- lower power output range. The advantages
to the series of converters is both are characterized by and system
components works and rolling mills, The Compact PLUS series is
customer are apparent: uniform and modular in de- freedom from
system per- (rectifier units, braking units) the paper and
plastic-film sign. ideal for applications in ma- solutions,
optimized with turbations, i.e. a very favor- have a uniform design
and a industries) and chines where only limited regard to price and
per- The power output of the able overall power factor uniform
connection system. single drives space is available. formance
standard units ranges from commutation failure-pro- in adapted
design 0.55 kW to 2300 kW. high quality, tected operation even in
(e.g. marine drives) maximum reliability All internationally
standard the event of supply dips for test stands (e.g. with supply
voltages from 380 V and as a result and power failure Active Front
End for low to 690 V are covered. flexible production and supply
stressing). optimized processes. Our world-wide service and sales
network provides all our customers and SIMOVERT MASTER- DRIVES
users with a direct line to: individual advice planning training
and service. 1/2 Siemens DA 65.10 2003/2004 Siemens DA 65.10
2003/2004 1/3
7. SIMOVERTr MASTERDRIVES Vector Control SIMOVERT MASTERDRIVES
Vector Control1 Overview Overview 1 Compact PLUS/compact and
Compact PLUS/compact and Applications chassis units cabinet units
chassis units cabinet units Applications Top solutions with
Depending on the appli- the possibility of reactive They can be
combined in SIMOVERT MASTERDRIVES SIMOVERT MASTERDRIVES Designed
for world-wide Quality in accordance with engineered drives cation
and the required power compensation many ways and arranged with
water-cooling for electromagnetically use DIN ISO 9001 output,
there are four types four-quadrant operation. side by side to match
every harsh environments compatible in any environ- The SIMOVERT
MASTER- The SIMOVERT MASTER- The quality standards of housing
design avail- possible drive requirement. ment DRIVES Vector
Control The units are designed as: The compact and chassis DRIVES
satisfy the relevant according to which the able: the Compact PLUS
converters and inverters are The SIMOVERT MASTER- international
standards and SIMOVERT MASTER- frequency converters are converters
for connection Being system modules, they unit, the compact unit,
the also available with water- DRIVES frequency conver- regulations
from the DRIVES are manufactured voltage-source DC link to a
3-phase AC system can be used to create the chassis unit and the
cabi- cooling. By installing in ters comply with the rele- European
EN standard and are high and have been converters with fully
digital inverters for connection to most suitable drive system, net
unit. appropriate cabinets, high vant EMC standard for pow- IEC to
UL and CSA. acclaimed. All aspects of technology and IGBT inver- a
DC bus whether this involves single The hardware and software ters
which, in conjunction rectifier units for supplying drives or
multi-motor drives. degrees of protection are er electronics.
production, i.e. develop- modules enable tailored achieved in a
closed system, ment, mechanical design, with Siemens three phase
power to the DC bus. EMC compliant installation and cost effective
drive thus making them suitable manufacturing, order pro- AC
motors, provide high- Customer-specific solutions enables them to
be used in solutions. A wide spectrum of system for use in any
harsh industri- cessing and the logistics performance, economical
industry and residential components and access- Cabinets and system
al environment. supply center of the drives for all industrial sec-
As a counterpart to ex- buildings. ories rounds off the range of
configurations for power SIMOVERT MASTER- tors and applications.
tremely high-performance products. output ranges from 0.55 kW New!
DRIVES, have been certified VC control on the motor to 6000 kW can
be created The Compact PLUS series by an independent authority
SIMOVERT MASTERDRIVES side, the SIMOVERT MAS- SIMOVERT MASTERDRIVES
to match specific customer in accordance with system-based drive
TERDRIVES AFE (Active The youngest member of The tailored solution
requirements, with either air- DIN ISO 9001. technology Front End)
unit ensures opti- the SIMOVERT MASTER- cooling or water-cooling in
A uniform, modular series mum energy supply on the All SIMOVERT
MASTER- DRIVES Vector Control fami- our application workshop.
Engineering technology of standard units line side as well with its
DRIVES share a consistently ly with power outputs of active,
line-angle-oriented uniform design. Throughout Examples of such
applica- with maximum benefit to The SIMOVERT MASTER- 0.55 kW to
18.5 kW rounds vector control. SIMOVERT the whole power range, the
tions are the customer DRIVES Vector Control off the product range
in the MASTERDRIVES AFE units units (converters, inverters)
multi-motor drives (steel- lower power output range. The advantages
to the series of converters is both are characterized by and system
components works and rolling mills, The Compact PLUS series is
customer are apparent: uniform and modular in de- freedom from
system per- (rectifier units, braking units) the paper and
plastic-film sign. ideal for applications in ma- solutions,
optimized with turbations, i.e. a very favor- have a uniform design
and a industries) and chines where only limited regard to price and
per- The power output of the able overall power factor uniform
connection system. single drives space is available. formance
standard units ranges from commutation failure-pro- in adapted
design 0.55 kW to 2300 kW. high quality, tected operation even in
(e.g. marine drives) maximum reliability All internationally
standard the event of supply dips for test stands (e.g. with supply
voltages from 380 V and as a result and power failure Active Front
End for low to 690 V are covered. flexible production and supply
stressing). optimized processes. Our world-wide service and sales
network provides all our customers and SIMOVERT MASTER- DRIVES
users with a direct line to: individual advice planning training
and service. 1/2 Siemens DA 65.10 2003/2004 Siemens DA 65.10
2003/2004 1/3
8. SIMOVERT MASTERDRIVES Vector Control SIMOVERT MASTERDRIVES
Vector Control1 Overview Overview 1 Compact PLUS/compact and
Compact PLUS/compact and List of contents Applications chassis
units cabinet units chassis units cabinet units List of contents
Applications Unit and system components Technical Selection and
Engineering Dimension characteristics ordering data information
drawings Page Page Page Page Compact PLUS units 3/4 3/6 6/2 7/2
Compact and chassis units 3/8 3/10 6/2 7/3 Converters and Inverters
Water-cooled converters 3/18 3/20 6/4 7/3 Converter cabinets 4/4
4/6 6/2 7/23 Self-commutating, pulsed rectifier/regenerative units
Active Front End AFE 3/24 3/26 6/23 7/3 Rectifier units Rectifier
units 3/28 3/30 6/14 7/2 Rectifier/regenerative units 3/28 3/32
6/17 7/6 Braking units and braking resistors Braking units and
Braking resistors 3/38 3/40 6/49 7/9 Line fuses 3/42 3/47 6/47 Line
commutating reactors 3/42 3/47 6/47 7/11 Autotransformers 3/42 3/73
6/47 7/13 Line-side switching and protection components
Radio-interference suppression filters 3/42 3/47 6/47 7/15
Overcurrent Protector units (OCP) 3/36 3/37 6/21 7/8 Fuse switch
disconnectors 3/43 3/46 6/48 Fuses 3/43 3/56 6/48 Precharging
resistors 3/43 3/57 6/48 7/18 Precharging contactor/ DC link
components connecting contactor 3/43 3/57 6/48 Free-wheeling diodes
3/43 3/57 6/48 Output reactors 3/43 3/50 6/50 7/19 Output sine
filters 3/43 3/50 6/52 7/21 Load-side components Voltage limitation
filters 3/43 3/51 6/51 7/21 Motor connecting cables 3/44 3/80 6/50
1/4 1/2 Siemens DA 65.10 2003/2004 Siemens DA 65.10 2003/2004 1/5
1/3
9. SIMOVERT MASTERDRIVES Vector Control SIMOVERT MASTERDRIVES
Vector Control1 Overview Overview 1 Compact PLUS/compact and
Compact PLUS/compact and List of contents Applications chassis
units cabinet units chassis units cabinet units List of contents
Applications Unit and system components Technical Selection and
Engineering Dimension characteristics ordering data information
drawings Page Page Page Page Compact PLUS units 3/4 3/6 6/2 7/2
Compact and chassis units 3/8 3/10 6/2 7/3 Converters and Inverters
Water-cooled converters 3/18 3/20 6/4 7/3 Converter cabinets 4/4
4/6 6/2 7/23 Self-commutating, pulsed rectifier/regenerative units
Active Front End AFE 3/24 3/26 6/23 7/3 Rectifier units Rectifier
units 3/28 3/30 6/14 7/2 Rectifier/regenerative units 3/28 3/32
6/17 7/6 Braking units and braking resistors Braking units and
Braking resistors 3/38 3/40 6/49 7/9 Line fuses 3/42 3/47 6/47 Line
commutating reactors 3/42 3/47 6/47 7/11 Autotransformers 3/42 3/73
6/47 7/13 Line-side switching and protection components
Radio-interference suppression filters 3/42 3/47 6/47 7/15
Overcurrent Protector units (OCP) 3/36 3/37 6/21 7/8 Fuse switch
disconnectors 3/43 3/46 6/48 Fuses 3/43 3/56 6/48 Precharging
resistors 3/43 3/57 6/48 7/18 Precharging contactor/ DC link
components connecting contactor 3/43 3/57 6/48 Free-wheeling diodes
3/43 3/57 6/48 Output reactors 3/43 3/50 6/50 7/19 Output sine
filters 3/43 3/50 6/52 7/21 Load-side components Voltage limitation
filters 3/43 3/51 6/51 7/21 Motor connecting cables 3/44 3/80 6/50
1/4 1/2 Siemens DA 65.10 2003/2004 Siemens DA 65.10 2003/2004 1/5
1/3
10. SIMOVERT MASTERDRIVES Vector Control SIMOVERT MASTERDRIVES
Vector Control1 Overview Overview 1 Compact PLUS/compact and
Compact PLUS/compact and List of contents Applications chassis
units cabinet units chassis units cabinet units List of contents
Applications Electronic and software options Technical Selection
and Engineering characteristics ordering data information Page Page
Page Communication with SIMATICr 2/13 3/92 6/56 Drive ES 2/13 3/91
Start up, parameterization and diagnostics with DriveMonitorr 2/10
3/92 Operator control and visualization 2/6 Operator control and
visualization PMU operator control and parameterizing unit OP1S
user-friendly operator control panel 2/7 2/8 3/90 3/90 External 24
V voltage supply and main contactor control 2/9 6/15 Control
terminal strips of the CUVC boards 2/9 6/35 Open-loop and
closed-loop control functions 2/3 6/28 Software functions 2/3 6/32
Control Free function blocks with the BICO system 2/3 6/33 Safe
Stop 6/33 Communication 2/4 6/54 Serial interfaces of the basic
units 2/4 6/54 CBP/CBP2 communication board for Motion Control with
PROFIBUS DP 2/5 3/85 6/57 Communication CBC communication board for
CAN 2/5 3/85 6/59 SLB communication board for SIMOLINKr 2/5 3/85
6/61 SCB1 interface board 3/89 3/89 6/80 SCB2 interface board 3/89
3/89 6/80 SCI1 and SCI2 interface boards 3/89 3/89 6/82 DTI digital
tachometer interface 3/89 3/89 6/85 SBP incremental encoder board
3/86 3/86 6/67 VSB voltage sensing interface 3/89 3/89 Interface
and expansion boards EB1 expansion board 3/86 3/86 6/63 EB2
expansion board 3/86 3/86 6/65 T100 technology board 3/87 3/87 6/69
T300 technology board 3/87 3/88 6/72 Technology boards T400
technology board 6/79 TSY synchronisation board 3/89 3/89 6/84
Compact PLUS units 6/53 6/53 Compact and chassis units 6/55
Integration of option boards Bus adapter for the electronics box
LBA 3/87 3/87 6/54 ADB adapter board 3/87 3/87 6/54 1/6 1/2 Siemens
DA 65.10 2003/2004 Siemens DA 65.10 2003/2004 1/7 1/3
11. SIMOVERT MASTERDRIVES Vector Control SIMOVERT MASTERDRIVES
Vector Control1 Overview Overview 1 Compact PLUS/compact and
Compact PLUS/compact and List of contents Applications chassis
units cabinet units chassis units cabinet units List of contents
Applications Electronic and software options Technical Selection
and Engineering characteristics ordering data information Page Page
Page Communication with SIMATICr 2/13 3/92 6/56 Drive ES 2/13 3/91
Start up, parameterization and diagnostics with DriveMonitorr 2/10
3/92 Operator control and visualization 2/6 Operator control and
visualization PMU operator control and parameterizing unit OP1S
user-friendly operator control panel 2/7 2/8 3/90 3/90 External 24
V voltage supply and main contactor control 2/9 6/15 Control
terminal strips of the CUVC boards 2/9 6/35 Open-loop and
closed-loop control functions 2/3 6/28 Software functions 2/3 6/32
Control Free function blocks with the BICO system 2/3 6/33 Safe
Stop 6/33 Communication 2/4 6/54 Serial interfaces of the basic
units 2/4 6/54 CBP/CBP2 communication board for Motion Control with
PROFIBUS DP 2/5 3/85 6/57 Communication CBC communication board for
CAN 2/5 3/85 6/59 SLB communication board for SIMOLINKr 2/5 3/85
6/61 SCB1 interface board 3/89 3/89 6/80 SCB2 interface board 3/89
3/89 6/80 SCI1 and SCI2 interface boards 3/89 3/89 6/82 DTI digital
tachometer interface 3/89 3/89 6/85 SBP incremental encoder board
3/86 3/86 6/67 VSB voltage sensing interface 3/89 3/89 Interface
and expansion boards EB1 expansion board 3/86 3/86 6/63 EB2
expansion board 3/86 3/86 6/65 T100 technology board 3/87 3/87 6/69
T300 technology board 3/87 3/88 6/72 Technology boards T400
technology board 6/79 TSY synchronisation board 3/89 3/89 6/84
Compact PLUS units 6/53 6/53 Compact and chassis units 6/55
Integration of option boards Bus adapter for the electronics box
LBA 3/87 3/87 6/54 ADB adapter board 3/87 3/87 6/54 1/6 1/2 Siemens
DA 65.10 2003/2004 Siemens DA 65.10 2003/2004 1/7 1/3
12. SIMOVERT MASTERDRIVES Vector Control1 Overview Compact
PLUS/compact and Order number examples chassis units cabinet units
Compact PLUS units, compact and chassis units e.g. 6SE 7 0 3 1 0EE
6 0 Z SIMOVERT MASTERDRIVES 6SE7 series Compact PLUS units, compact
units, chassis units Multiplier for output current e.g.: 2 1
Example: 3 10 4 100 Multiplier = 10 First two positions of output
current: 10 First two positions for output current Output current
rounded off = 100 A Supply voltage code e.g. E 3 AC 380 V 480 V
Size e.g. chassis size E Control version 6 SIMOVERT MASTERDRIVES
Vector Control Function release Supplementary order codes for
options Cabinet units e.g. 6S E 7 1 3 1 6 FD 6 1 3BA 0 Z SIMOVERT
MASTERDRIVES 6SE7 series Cabinet units Multiplier for output
current e.g.: 2 1 Example: 3 10 4 100 Multiplier = 10 First two
positions of output current: 16 First two positions for output
current Output current rounded off = 160 A Supply voltage code e.g.
F 3 AC 500 V 600 V Size e.g. Cabinet size D, width 1200 mm Control
version 6 SIMOVERT MASTERDRIVES Vector Control Mechanical version
e.g. 1 size, chassis units E to G Electrical version e.g. 3
converter, single-quadrant Function release Supplementary order
codes for options 1/8 Siemens DA 65.10 2003/2004
13. Vector Control System Description 2 System layout 2/2
Converters and inverters 2/2 Rectifier units and
rectifier/regenerative units 2/3 Self-commutating, pulsed
rectifier/ regenerative units Active Front End AFE 2/3 System
components 2/3 Overcurrent protector units (OCP) Control functions
2/3 Control types 2/3 Software functions 2/3 Free function blocks
Communication via serial interfaces 2/4 Interfaces on the base
units 2/5 Options: communication and interface boards 2/5 Transfer
protocols and fieldbus systems Operator control and visualization
2/7 PMU operator control and parameterizing unit 2/8 OP1S
user-friendly operator control panel 2/9 Control terminal strip 2/9
External 24 V voltage supply and main contactor control 2/10
Start-up, parameterization and diagnostics with DriveMonitor
SIMOVERT MASTERDRIVES in the world of automation 2/11 Link-up to
automation systems 2/12 Integrating drives in SIMATIC S5 2/13
Integrating drives in SIMATIC S7 with Drive ES 2/14 Configuration
program Drive ES Siemens DA 65.10 2003/2004 2/1
14. SIMOVERT MASTERDRIVES Vector Control System Description
Compact PLUS/compact and System layout chassis units cabinet units
SIMOVERT MASTERDRIVES converters The SIMOVERT MASTER- 2300 kW (see
Fig. 2/1), system of the units makes tion 4). The converter cabi-
DRIVES Vector Control se- application cabinets up to the design of
extremely net units are ready-to-con- ries of converters consists
of 6000 kW. compact multi-motor drives nect cabinets for single and
modular, high-performance possible. Compact PLUS group drives with
options2 components. These compo- nents can be combined for The
units have a uniform connection system: the line- units can be
mounted into 300 mm deep cabinets. available for every possible
application. voltage and DC link terminals individual applications.
are located on top and the Compact units are de- Designs available:
motor terminals at the signed in the space-saving Converters and
inverters Single-quadrant operation, bottom. BOOKSIZEformat with
6/12 pulse, line-commutated The SIMOVERT MASTER- IP20 degree of
protection . The modular and uniform DRIVES are available as: The
units are simply hung Four-quadrant operation, design of the
electronic from a standard DIN G rail 6-pulse, line-commutated
converters for connection options enables optimized and secured at
the bottom to a 3-phase AC system. matching to all drive require-
Four-quadrant operation, of the cabinet with a screw ments with
regard to both self-commutated with inverters for connection to
fastening. Compact units technology and communica- Active Front
End. DC buses which are sup- can be mounted into tion. plied with
power by rectifier 400 mm deep cabinets. Rectifier units and or
rectifier/regenerative Easy handling and instal- Chassis units are
designed rectifier/regenerative units. lation and a high level of
with IP00 degree of protec- units uniformity were essential The
system of components tion. The covers conform factors in the
development Types of DC voltage supply enables a uniform layout,
with the safety regulations of the SIMOVERT MASTER- units
irrespective of whether to DIN VDE 0113, Part 5 and DRIVES. This is
demon- converters or inverters are DIN VDE 0106, Part 100 There are
two types of DC strated by the standardized used. The components
can (VBG 4). IP20 degree of supply units for supplying housings,
mounting and con- be installed side by side in al- protection can
also be one or more inverters: nection levels, as well as by most
any combination, even achieved with an optional the connections to
signal The rectifier unit is a if they are different in size,
enclosure kit. and bus cables. 6-pulse rectifier bridge with
enabling considerable space The Compact PLUS units as pre-charging
circuit and savings to be made. The SIMOVERT MASTER- well as the
compact and enables the flow of energy DRIVES are available as Com-
As system modules, they chassis units can be installed from the
power system to pact PLUS units, compact can be used to obtain the
without any space between the DC voltage bus (sin- units, chassis
units and as cab- right solution to match any them. gle-quadrant
operation). inet units. drive task, whether single or Cabinet units
are supplied multi-motor. Compact PLUS units are as converters with
IP20 de- the specialists for limited The SIMOVERT MASTER- gree of
protection as stan- space conditions. The DRIVES converter series
dard. Cabinets with higher BOOKSIZEformat in covers a power output
rang- degrees of protection are IP20 degree of protection ing from
0.55 kW to also available (see Sec- and the ideal connection
DA65-5282c 55 kW 3-ph. AC 660 V 690 V DC 890 V 930 V 2300 kW 37 kW
3-ph. AC 500 V 600 V 3-ph. AC 500 V 600 V DC 675 V 810 V DC 675 V
810 V 30 kW 45 kW 1700 kW 3-ph. AC 380 V 480 V 3-ph. AC 380 V 480 V
DC 510 V 650 V DC 510 V 650 V Compact units 37 kW 1300 kW 3-ph. AC
380 V 480 V DC 510 V 650 V 18.5 kW Compact PLUS units Chassis
units/cabinet units 0,55 2,2 10 100 1000 2300 Fig. 2/1 Output power
range of SIMOVERT MASTERDRIVES Vector Control 2/2 Siemens DA 65.10
2003/2004
15. SIMOVERT MASTERDRIVES Vector Control System Description
Compact PLUS/compact and chassis units cabinet units System layout
The rectifier/regenerative ative AFE (Active Front End) braking
resistor is necessary. In order to avoid this, the unit consists of
two anti-