Upload
duongdan
View
220
Download
1
Embed Size (px)
Citation preview
VIBCODE®
compatible
102,400 linesof resolution
VIBXPERT®
2-Channel Vibration Analyzer
Weighs only 2.2 lbs.
Simple joystick operation
Signal post processing
Bearing databases
Machine fault frequency markers
Graph-based route
VIBXPERT® is versatile• Overall values include
machine vibration,shock pulse,temperature, RPM
• Process parameters
• Visual inspection data(only in Route mode!)
• Diagnosis
• Signal processing
• Roller bearing database
• Balancing 1 or 2 plane(optional)
• Built-inISO standards
The VIBXPERT® vibration data col-lector and signal analyzercombines route-based data collec-tion with machine diagnostics inone tool.
VIBXPERT® excels in
• Fast data acquisition
• Complete data analysis on-site
• Useful knowledge-based setups– Intuitive for beginners– Powerful for experts
• Connections support almost allsensor types
Powerful, yet intuitive
VIBCODE®
Automatic measurement loca-tion identification byVIBCODE® ’fingerprint’ – thecoded ring!• No mix up of measurement
locations• Reproducible measure-
ments• Stable connection• Defined contact pressure• Defined measurement di-
rection
Simultaneous!Carries out two measurementsat the same time – with orwithout trigger/RPM as re-quired.• Dual channel measure-
ments for diagnosis andcorrection- orbit- cross phase- coast down- 2-plane balancing
• Independently selectabledual channel measurementtasks.
Portable!Lightweight design with carry-ing strap, ideal for machinerysurvey.
The best connections!5 robust color-coded connec-tors on the upper side of thedevice are stable, cannot beconfused and are dustproof.
Meas. channels /Charging jack
Temperature
Trigger / RPMSerial - RS 232
Signal OutUSB / Ethernet
Protective dust caps
IP65 rated
Clear displayThe high-contrast backlit dis-play (1/2 VGA) is easy to read –even in broad daylight.
VIBXPERT® at a glance
Single-handed operationInstinctive joystick operationwith ergonomically arrangedkeys.
VIBXPERT® with its comprehensivemeasurement and analysis func-tions and intuitive user operation isideal for routes.Together with the OMNITREND®
PC software, VIBXPERT® providesan important contribution to con-dition-based maintenance forpreventing unforeseen machinebreakdowns and expensive pro-duction losses.
VIBXPERT® lights upIf it‘s too dark, VIBXPERT® au-tomatically switches on thekeyboard illumination. Thelighted display allows work dayor night.
Expandable memoryReplaceable flash card pro-vides virtually unlimitedmemory (standard 64MB).
Alarm displayto ISO standardsFour indicator LEDs onthe display indicate'Everything OK' (blue)‘Prewarning' (green)'Warning' (yellow)'Alarm' (red).
The attractive external design ofVIBXPERT® is also reflected in itsinternal structure: intuitive, graphi-cal user interface, straightforwarduser guidance and a constantlyavailable help function allow notonly skilled experts, but also aninexperienced novice to quicklyachieve reliable results.
Route options
Intuitive operation
VIBXPERT® really measures up!
File Manager with‘Windows’ design
Icon driven menu Measurement task selection
Route composition in OMNITREND®
FunctionalityWindows-style File Managerfor non-route data storage.Easily transferred to OMNI-TREND® PC software. Iconguided navigation with easytask selection.
See, click - measure!Visual route guidance usingmachine graphics provides ahigh degree of convenience forthe user. VIBCODE® recognizesthe measurement position au-tomatically.
Measurement location selection in thetrees view...
... or using the machine graphic
Evaluation
Signal Analysis
OMNITREND®
PC software
Measurement values and alarm violation Trend graph with alarm limits Identification of damage frequencies
Barely increased measurement values at 50 Hz(electrical failure)
High vibration level at 122 Hz(= 1st impeller passing frequency)
Coast down measurement indicatesthe resonance points
Shaft displacement as orbit
Condition monitoringRegular recording of measure-ment values provides a clearpicture of the machine condi-tion trend.
The 2-channel VIBXPERT®
comes equipped with phasemeasurement, coast downmeasurement, orbit, cepstrum,etc.
OMNITREND® manages machinedata, programs measurement tasksand routes, and archives the resultsin a database (MS Access, Oracle*,MS SQL*). Comprehensive func-tions are available for evaluationand documentation: alarm check,trend preview, multiview, bandanalysis, waterfall display, fre-quency markers and variouscursors.
Alarms & diagnosisIf there is an alarm, narrowband monitoring in the fre-quency spectrum shows thedamaged component. Fre-quency markers supportidentification of characteristicfrequencies typical for specifictypes of damage. Additionalfunctions for diagnosis can becalled up via a menu.
*optional
Recording the vibration amplitudesin a narrow frequency band
Cross-channel phase measurement
Measurement channels
2 analog channels (A & B), selectable:- Voltage (AC/DC, ±30 V max.)- Current (AC/DC, ±30 mA max.)- ICP® signal (2 mA, 24 V max.)- LineDrive signal (10 V, 10 mA max.)
1 analog channel:- temperature probe (thermocouple type K)
1 digital channel:- 1+1 pulse/tacho (RPM, trigger, key phaser)- Pulse & AC signals (± 26 V)
Parameters - analog measurement channels (A & B)
Frequency range 0.5 Hz to 51 kHz
Dynamic (measured/total) 96 dB / 136 dB
Sampling rate <131 kHz per channel
Outputs
Stroboscope control: TTL
Signal out: for headphone and signal processing
Measurement range / AccuracyRPM 10...200 000 rpm / ±1‰ / ±1rpm
Temperature -50...+1000°C / ±1% / ±1°C
VIBXPERT® technical dataDisplacement* 6000 µm (p-p) / ±5%
Velocity* 6000 mm/s (p-p) / ±1%
Acceleration* 6000 m/s² (p-p) / ±1%
FFT
Fmin 0.5 Hz ... 10 Hz, selectable
Fmax 200 Hz ... 51 kHz, selectable
Lines 100 ... 102,400
Window Rectangular, Hanning, Hamming,Blackman, Bartlett, Flattop, Kaiser
Operating modes
Multimode (non-route)- Overall values: vibration (acceleration, velocity,displacement), current, voltage (AC / DC), shockpulse (roller bearing condition), temperature, RPM- Signals: spectrum (amplitude, envelope), timewaveform, phase & cross-channel phase, orbit,coast down measurement, impact test
Data acquisition (Route)- Guidance via tree, list view or machine graphic- Process optimization for quick data acquisition
Balancing (optional)- Dynamic balancing in 1 or 2 planes
Memory
RAM, internal 256 MB
CompactFlash 1 GB, upgradeable
Display
LCD, illuminated, 480 x 320 pixels (1/2 VGA)
Supply
Lithium-Ion battery, exchangeable (7.2V / 4.8Ah).
Chargeable in device. charge time < 5 hours
Temperature range
Storage -4°F...+140°F
Operation 14°F...+140°F
Protection class
IP65, dustproof and waterproof
Dimensions
7.1 x 6.3 x 2 inches (LxWxH)
Weight
2.6 lbs.
Further technical data is given in the VIBXPERT® ProductCatalog, available for download as a PDF on our website.
* Current LineDrive transducer (1µA/ms-²) and sensorwith voltage output (100mV/g); Reference: 159.15 Hz
LUDECA Inc.1425 N.W. 88th AvenueDoral, FL 33172www.ludeca.comPhone: (305) 591-8935Fax: (305) 591-1537eMail: [email protected]
Visit us at www.pruftechnik.comVisit us at www.ludeca.com
Productive maintenance technology
PRÜFTECHNIKCondition Monitoring85737 Ismaning, Germanywww.pruftechnik.comPhone: +49 89 99 61 60Fax: +49 89 99 61 63 00eMail: [email protected]
Printed in Germany VIB 9.800.08.05.LUDVIBXPERT® and VIBCODE® are registered trademarks of PRÜF-TECHNIK Dieter Busch AG. No copying or reproduction of thisinformation, in any form whatsoever, may be undertaken withoutexpress written permission of PRÜFTECHNIK AG. The informationcontained in this leaflet is subject to change without further noticedue to the PRÜFTECHNIK policy of continuous product develop-ment. PRÜFTECHNIK products are the subject of patents grantedor pending throughout the world.© Copyright 2005 by PRÜFTECHNIK AG.
Balancing (optional)
The VIBXPERT® case is robust with itscustomized foam inlays, guaranteesoptimum transport protection forthe components and numerous ac-cessories. Compact dimensions andthe low overall weight makes it ahandy companion.
Graphically assisted program for in-tuitive operation. Trial weightestimator suggests appropriateweight and placement. Single ordual vector display with a runninghistory of the job. Built-in ISO toler-ances.
Balancing in one or two planes ‘Smiley’ appears when ISO BalancingGrade Tolerances are met