Upload
ureche-monica-cristina
View
7
Download
2
Embed Size (px)
DESCRIPTION
handmade
Citation preview
INNOVATION DESIGN FEATURE
SET“SHIMMERING LACE”
SWAROVSKI ELEMENTS Supplies & Tools
WWW.CREATE-YOUR-STYLE.COM 2 /12
Article Product Group Article No. Amount Size Color Color Code
Beads 5000 2 pcs. 6 mm Crystal Silver Shade 001 SSHA
Beads 5328 4 pcs. 4 mm Crystal Silver Shade 001 SSHA
Beads 5534 6 pcs. 14.5 mm Crystal 001
Beads 5534 5 pcs. 14.5 mm Crystal Golden Shadow 001 GSHA
Beads 5534 4 pcs. 23.5 x 5 mm Crystal 001
Beads 5050 3 pcs. 14 x 10 mm Crystal Comet Argent Light 001 CAL
Beads 5621 2 pcs. 14 mm Crystal Comet Argent Light 001 CAL
Crystal Pearls 5810 5 pcs. 6 mm Crystal Ivory Pearl 001 IVPR
Crystal Pearls 5821 4 pcs. 11 x 8 mm Crystal Ivory Pearl 001 IVPR
Pendants 6328 8 pcs. 6 mm Crystal 001
Pendants 6328 1 pc. 8 mm Crystal 001
Pendants 6328 4 pcs. 10 mm Crystal 001
Supplies
Chain, silver, 2 m6x Head Pin, silver15x Jump ring,silver, 4 mmNylon thread, transparent,
0.15 mm, 3 mWire, silver
1 mm, 1.80 mLace, cream, 30 x 30 cm
Tools
Double sided tapeFlat nose pliersFine sewing needleHalf round pliersPinsRound nose pliersScissorsSewing machineSheet of paper, A4Side cutter
Level of design: INTERMEDIATE
Have also a look at the text instruction at the last page!
Sewing
“SHIMMERING LACE“ COLLAR
1:2
15.5 cm
6 cm
1.5 cm
7.5 cm
12.5 cm
STEP 1
Wiring
Scale 1:2
WWW.CREATE-YOUR-STYLE.COM 3 /12
STEP 2
WWW.CREATE-YOUR-STYLE.COM 4 /12
STEP 3
STEP 4
WWW.CREATE-YOUR-STYLE.COM 5 /12
STEP 5
WWW.CREATE-YOUR-STYLE.COM 6 /12
Scale 1:1
STEP 6
WWW.CREATE-YOUR-STYLE.COM 7 /12
STEP 7
STEP 8
WWW.CREATE-YOUR-STYLE.COM 8 /12
STEP 9
WWW.CREATE-YOUR-STYLE.COM 9 /12
WWW.CREATE-YOUR-STYLE.COM 10 /12
STEP 10
WWW.CREATE-YOUR-STYLE.COM 11 /12
WWW.CREATE-YOUR-STYLE.COM 12 /12
STEP 1: Print out the pattern to double its shown size or draw a similar one with the measurements as shown in the illustration.
STEP 2: Put double sided tape behind the pattern, stick it onto a piece of lace as shown and cut it out.
STEP 3: There should be about 5 mm of the pattern left out at the upper edge as shown in the illustrations.
STEP 4: Use 2 m of sliver wire and form the shape shown in the illustrations. Fold the closed end over using round nose pliers.
STEP 5: Fold the seam of the lace inwards and secure with the pins. Place the wire over the lace and sew it with a zig-zag stitch on a sewing machine. Flip the entire piece over and sew it similarly from the back side as shown in the illustrations.
STEP 6: Fold the leftover ends of the wire inwards and cut them off leaving just enough length to bend a loop onto the
other end of the wire.
STEP 7: Cut 1 m of 0.15 mm nylon thread and sew the SWAROVSKI ELEMENTS on to the lace as shown in the illustration.
STEP 8: Slide on Swarovski XILON Beads art. 5328 4 mm Crystal Silver Shade and Crystal Pearls art. 5821 11 x 8 mm
Crystal Ivory Pearl onto a head pin and form a loop at the ends. Repeat step to create a total of 6 as shown in the illustrations.
STEP 9: Cut different lengths of chains (13, 19 and 24 cm) and attach previously prepared SWAROVSKI ELEMENTS loops onto chains using 4 mm jump rings. Attach the three chains onto the lace as shown.
STEP 10: Repeat step 7 and 9 to attach all SWAROVSKI ELEMENTS onto the lace as shown. Cut the chain to the following lengths and attach with 4 mm jump rings as shown in the illustrations. Chain lengths are as follows in order of their appearance on the lace: 6.5 cm, 7.5 cm, 6 cm, 10 cm, 5 cm, 8.5 cm, 7 cm, 5.5 cm and 4 cm.
“SHIMMERING LACE” COLLAR