Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
CUSTOM PRODUCTBY CATERPILLAR
SAFETY.CAT.COM
GEBP8270-04JANUARY 2017
BLADE 315-6683PARTS MANUAL
Product and Dealer InformationNote: For product identification plate locations, see the section “Product Identification Information” in the Operation and Maintenance Manual.
Delivery Date:
Product InformatonModel:
Product Identification Number:
Engine Serial Number:
Transmission Serial Number:
Generator Serial Number:
Attachment Serial Numbers:
Customer Equipment Number:
Dealer Equipment Number:
Dealer InformationName: Branch:
Address:
Dealer Contact Phone Number Hours
Sales:
Parts:
Service:
Attachment IdentificationCaterpillar Work Tools products are identified with SERIAL NUMBERS, MODEL NUMBERS AND REFERENCE NUMBERS. These numbers are assigned to the product and completing components for the product (i.e. - lines groups, mounting brackets, etc. These numbers are shown on the SERIAL NUMBER plate.
Caterpillar dealers use all these numbers to determine which components were assembled on your product at the factory. This permits accurate identification of replacement part numbers.
Ordering PartsQuality replacement parts are available from Caterpillar Dealers throughout the world. Their parts inventories are up to date and include parts required to repair or rebuild your Cat-erpillar work Tools product. When ordering parts, you should specify the quantity, part number, and you should provide attachment reference number, part name, and the serial number, if in doubt about the part number, please provide your Caterpillar dealer with a complete description of the needed item.
How To Use The Parts BookCaterpillar Work Tools parts books include il-lustrations of the groups or assemblies which make up the product. These illustrations show the components of the product.
Abbreviations And Symbols
Ref No.The numbers shown in this column refer to the numbers shown within the illustration. To identify any item within the illustration, first determine its reference number, then refer to the same number in the Ref. No. column in the bill-of-materials for more information about the part
Part NumberThese numbers identify the serviceable parts.
QtyThe quantities shown in this column indicate the total number of that item used in the group or assembly covered by the illustration.
Part NameInformation this column provides is the name of the part as well as additional information such as size, which further aids in the identifi-cation of the part.
Indented Parts NamesWithin each illustration is a parts list identify-ing each serviceable part in the illustration. When a part name is indented in this list, it means that the serviceable item is a part of the serviceable item under which it is indent-ed.
NOTE: Continuing improvements and advance-ments of product design may cause changes to your attachment which may not be in-cluded in this publication. Each publication is reviewed and revised, as required, to update and include these changes in later editions.
Whenever a question arises regarding your Caterpillar Work Tools product, or this publica-tion, please consult your Caterpillar dealer for the most current information available.
O.D Outside DiameterI.D. Inside DiameterA Not serviced as a groupB Use as requiredC Change from previous typeD Order by the meterE Order by the centimeterF Not shownG Order by the inchM Metric PartN Note belowY Separate illustration* Part available from Caterpillar Work Tools
4Work Tools
3156683_NF 1 of 3
BLADE GP 315-6683 BLADE GP-REVERSIBLE
GRAPHIC REF PART NAME SEENOTE REF NO PART NUMBERQTY 1 2 3 4 5 6 (PRODUCT LEVEL) PAGE
1 3B-8488 2 FITTING-HYDRAULIC2 3B-8489 2 ADAPTER-STR3 3G-8259 1 TRUNNION4 3J-6572 40 SHIM5 4B-3599 8 SCREW-SET6 4J-0121 2 CAP-BEARING7 6V-0743 2 GUARD8 6W-2889 2 COUPLER-QDISC9 6W-2891 2 PLUG AS-DUST
10 8A-8580 6 EDGE-CUTTING11 8A-8581 2 EDGE-CUTTING12 8T-7915 2 ADAPTER13 137-4234 1 PLATE-BUCKET14 161-4130 2 PLATE-IDENT15 280-9991 1 EDGE AS16 281-0004 6 PLATE-WEAR17 281-0005 2 TRIP EDGE AS-CTR18 281-0011 1 TRIP EDGE AS-RH19 281-0404 12 PLATE SPACER20 285-3254 1 PLATE-PROTECTOR
I 21 317-3456 2 HOSE AS.22 317-3457 5 PIN AS.
I 23 317-3462 2 HOSE AS.I 24 317-3463 2 HOSE AS.
25 319-2856 6 BASE AS.-SHOE26 328-4365 2 PLATE27 432-8334 4 SPRING-RH28 432-8335 4 SPRING-LH
Y 29 434-8232 2 CYL GP-HYD30 0S-1621 5 BOLT31 124-2114 4 COUPLING AS-PERM32 124-2117 4 COUPLING AS-PERM33 124-2145 4 COUPLING-PERM34 1D-4610 4 BOLT35 1D-5118 8 NUT-JAM36 1K-6870 4 LOCKNUT37 312-5694 1 SETSCREW-HEX SOC38 3D-2824 2 SEAL-O-RING-STOR39 3J-1907 4 SEAL-O-RING-STOR40 4F-3654 20 BOLT-PLOW
Y = SEPARATE ILLUSTRATION
I = HYDRAULIC INFORMATION SYSTEM
3156683_NF 2 of 341 4F-3656 24 BOLT-PLOW42 4K-0367 44 NUT-FULL43 5P-8245 5 WASHER-HARD44 6V-0408 2 SEAL-BONDED45 6V-8397 4 SEAL-O-RING-ORFS46 6V-8398 8 SEAL-O-RING-ORFS47 6V-8633 2 ADAPTER-STR 48 6V-8724 4 ADAPTER-ELBOW 9049 6V-9169 2 NUT-BULKHEAD50 8T-6895 2 ADAPTER-TEE
BLADE GP 315-6683 BLADE GP-REVERSIBLE
82
92
106
112
122
172
212
382
442
472
502
142
334
12
440 6
2344
31
256
462
72
324
364
3156683_NF 3 of 3
BLADE GP 315-6683 BLADE GP-REVERSIBLE
151
166
181
225
58
1912
201
262
274
284
314
22
232
242
292
492
305
4020
4124
4244
435
131
358
371
394
454
484
466
4348232_NF 1 of 1
BLADE GP 434-8232 CYLINDER GP-HYDRAULIC
GRAPHIC REF PART NAME SEENOTE REF NO PART NUMBERQTY 1 2 3 4 5 6 (PRODUCT LEVEL) PAGE
1 434-8229 1 ROD AS 2 434-8231 1 TUBE AS 3 434-8235 2 BEARING
4 172-9265 1 PISTON 5 2K-7468 1 LOCKNUT 6 243-4961 1 GLAND 7 343-4305 1 KIT-SEAL (EACH INCLUDES)
3 5 4
7F
7D 1 2 7G
7A
7B
7C
7E
7H
6 3
2H-3931 SEAL-O-RING
RING-BACK UP
RING-WEAR
SEAL AS
SEAL-U-CUP
RING-WEAR
SEAL AS-BUFFER
SEAL-WIPER
4J-9224
4T-6907
4T-8054
167-2300
7J-9885
167-2190
308-1880
1
1
1
1
1
1
1
1
7A
7B
7C
7D
7E
7F
7G
7H
©2015 Caterpillar All Rights Reserved
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow”, and the POWER EDGE trade dress as well as cor-porate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.