Upload
vunga
View
239
Download
0
Embed Size (px)
Citation preview
Curriculum Vitae
PERSONAL DETAILS
Name Izni Syahrizal bin Ibrahim, Dr.
Gender Male
Date of Birth 21 September 1975
New I/C No. 750921-01-5649
Old I/C No. A 3109656
Profession Senior Lecturer
Place of Birth Johor Bahru
Nationality Malaysian
Marital Status Married
Telephone Office: +6(07)-
5538703
Fax: +6(07)-
5566157
Mobile: +6(012)-7030334
E-mail Address [email protected] or [email protected]
Personal Website http://civil.utm.my/iznisyahrizal
ID Staff 7693
Specialisation Specialising in design and construction of precast concrete structures,
reinforced concrete structures and fibre reinforced concrete
Corresponding Address: Permanent Address:
Forensic Engineering Centre (FEC),
Institute for Smart Infrastructure & Innovative Construction (ISIIC),
Faculty of Civil Engineering,
Universiti Teknologi Malaysia,
81310 Johor Bahru,
Johor, Malaysia
No. 32 Jalan Jasa 40,
Rini Hills, Mutiara Rini,
81300 Skudai,
Johor, Malaysia
ACADEMIC QUALIFICATIONS
2008 Ph.D (Civil Eng.) University of Nottingham, UNITED KINGDOM
Thesis title: Interface Shear Strength of Hollow Core Slabs with Concrete
Toppings
2000 M.Eng (Structure), Universiti Teknologi Malaysia, MALAYSIA
Thesis title: Static and Fatigue Behaviour of Trapezoid Web Plate Girder
1998 B. Eng (Hons) in Civil Engineering, Universiti Teknologi Malaysia,
MALAYSIA
AWARDS AND HONORS RECEIVED
1. Hadiah Latihan di bawah Skim Latihan Akademik Bumiputera from the Ministry of
Higher Education Malaysia in 2003.
2. The Joe Pierce Concrete Technology Award Trust from the Concrete Society UK in 2006.
3. Hadiah Pergerakan Gaji (HPG) from Universiti Teknologi Malaysia in 2009.
4. Hadiah Pergerakan Gaji (HPG) for PTK3 from Universiti Teknologi Malaysia in 2009.
5. Anugerah Staf Akademik Harapan from the Faculty of Civil Engineering in 2010.
6. Anugerah Khidmat Cemerlang 2010 (Citra Karisma) from Universiti Teknologi
Malaysia in 2011.
7. Anugerah Penghargaan e-ppp from the the Faculty of Civil Engineering in 2012.
8. Anugerah Khidmat Cemerlang 2014 (Citra Karisma) from Universiti Teknologi
Malaysia in 2015.
PROFESSIONAL MEMBERSHIP
1. Graduate Engineer of the Board of Engineers Malaysia (BEM)
(Registration No.: 29940A)
2. Graduate Member of the Institution of Engineers Malaysia (IEM)
(Member No: 19001)
3. Member of Malaysian Structural Steel Association (MSSA)
4. Ordinary Member. Malaysian Society of Engineering & Technology (mSET)
(Membership No: 00548)
PROFESSIONAL EMPLOYMENT
2009 – To date Senior Lecturer, Universiti Teknologi Malaysia
2000 – 2009 Lecturer, Universiti Teknologi Malaysia
1998 – 2000 Tutor, Universiti Teknologi Malaysia
1998 Structural Engineer, Amin and Teh Consultant Ptd. Ltd., Selayang,
Selangor
CURRENT AND PAST POSITION
Since January 2015 Technical Manager (Structures & Materials), Civil Engineering Testing
Unit (CETU), Faculty of Civil Engineering, UTM
Since February 2015 Research Fellow, Forensic Engineering Centre (FEC), Institute for Smart
Infrastructure & Innovative Construction (ISIIC), UTM
Since July 2015 Leader, Precast Concrete Research Group (PCRG), Faculty of Civil
Engineering, UTM
1 January 2010 – 30
October 2014
Head of Material Laboratory, Faculty of Civil Engineering, UTM
1 April 2013 – 30 October
2014
Energy Manager, Faculty of Civil Engineering, UTM
ADMINISTRATIVE EXPERIENCE (EXTENDED)
Course Coordinator
1. July 2001 – November 2001: Subject Coordinator SAM 1012 – Mechanics of Static
2. July 2002 – November 2002: Subject Coordinator SAM 2213 – Mechanics of Materials
and Structures
3. December 2008 – October 2014: Subject Coordinator MAB 1193/MAE 1193 – Precast
Concrete Design and Construction
4. July 2008 – July 2014 : UTMSPACE-FKA Final Year Project Coordinator
5. October 2015 – December 2016: Program Coordinator for Master in Forensic
Engineering
Faculty Level
1. June 1998 – June 2000: Committee Member Civil Engineering Laboratory Accreditation
2. July 1998 – December 1998: Committee Member Program Penggalakan Sains dan
Teknologi Negeri Johor Peringkat Fakulti Kejuruteraan Awam
3. October 2000 – August 2004: Department of Structure and Material Webmaster
4. February 2001 – December 2001: Committee Member Cleanliness Laboratory
5. April 2002 – April 2004: Committee Member Implementation of Teaching in English
6. April 2002 – April 2004: Committee Member E-Learning Programme for 2002/03
Session
7. June 2002 – June 2004: Committee Member ISO 9002 (Academic Management)
8. March 2003 – November 2003: Deputy Secretary Professional Development Seminar
2003 (Session I and II)
9. August 2003 – July 2004: Committee Member 31st UTM Convocation
10. July 2003 – November 2003: Committee Member Visiting Prof. Ahsan Kareem
11. September 2007 – September 2009: Social Bureau Leader Faculty’s Family Club
12. 1 August 2008 – 1 August 2009: Committee Member Accreditation Report for the Part-
time Programme (UTMSPACE)
13. 1 September 2008 – 31 August 2010: Committee Member Faculty’s Research University
(RU)
14. 1 January 2009 – 31 August 2009: Committee Member Anugerah Kualiti Naib Canselor
2008
15. 1 March 2009 – 1 March 2010: Committee Member Laboratory Syllabus Coordination
16. 4 March 2009 – 5 March 2011: Committee Member Post-Graduate Studies
17. 1 May 2009 – 30 April 2010: Coordinator Faculty’s E-Learning
18. April 2009 – November 2009: Secretary 7th UTMBridge Model Competition
19. 1 September 2009 – 31 August 2011: Committee Member ISO 17025/CETU
20. 1 September 2009 – 31 August 2011:`Committee Member Faculty’s Family Club
21. 29 March 2010 – 30 March 2012: Committee Member Teknikal Sebutharga
22. 23 August 2010 – 7 July 2012: Social Bureau Committee Family Club
23. 21 February 2011 – 20 February 2013: Committee Member Innovation Festival 2011
24. 21 February 2011 – 20 February 2013: Secretary 8th UTMBridge Model Competition
25. 21 February 2011 – 20 February 2013: Committee Member ISO 17025/CETU
26. 21 February 2011 – 20 February 2013: Committee Member Occupational Safety & Health
(OSHE)
27. 1 January 2013 – 31 December 2015: Committee Member Occupational Safety and
Health (OSHE)
28. 1 January 2013 – 31 December 2013: Committee Member Technical Evaluation
29. 1 January 2013 – 31 December 2013: Committee Member Aset Alih Fakulti
30. 12 December 2013 – 30 December 2014: Secretary 9th UTMBridge Model Competition
31. Since 1 January 2016: Committee Member Research, Innovation, Commercialisation and
Entrepreneurial (RICE)
32. Since 1 March 2016: Committee Member Teaching ISO 9001: 2008
33. 22 June 2016 – 31 December 2016: Publication Coordinator Seminar Penyelidikan
Kejuruteraan Awam (SEPKA)
University Level
1. Mac 2016 – November 2016: Committee Member Lapangan Kebitaraan Pembangunan
Infrastruktur Mampu Milik dan Pengangkutan
National Level
1. Since October 2014: National Council for Occupational Safety and Health:
Jawatankuasa Keselamatan dan Kesihatan Pekerjaan (KKP) di Institusi Pendidikan.
2. Since June 2016: Technical Committee Laboratory Testing of Construction Material for
“Scaffolding”to MS 1462 Part 1-4. Construction Research Institute of Malaysia
(CREAM).
International Level
1. 1 January 2008 – 1 December 2009: Technical Committee 7th Asia Pacific Structural
Engineering & Construction Conference (APSEC) 2009
2. 20 May 2010 – 31 December 2012: Technical Committee 8th Asia Pacific Structural
Engineering & Construction Conference (APSEC) 2012
3. 1 October 2013 – 31 December 2015: Technical Committee 9th Asia Pacific Structural
Engineering & Construction Conference (APSEC) 2015
4. November 2015 – To date: Guest Editor, Malaysian Construction Research Journal
(MCRJ) (Scopus Indexed)
5. April 2013: Editorial Board Jurnal Teknologi – Special Edition (Scopus Indexed)
6. Since May 2016: Committee Member 10th International UTMBridge Model Competition
TEACHING ACTIVITIES
POSTGRADUATE LEVEL
Session Semester Course Code Course Name Credit
2008/2009 2 MAB 1193 Precast Concrete Design and Construction 3
2009/2010 2 MAE 1193 Precast Concrete Design and Construction 3
2010/2011 1 MAE 1103 Experimental Test Design 3
2010/2011 2 MAE 1193 Precast Concrete Design and Construction 3
2011/2012 1 MAE 1193 Precast Concrete Design and Construction 3
2012/2013 1 MAE 1193 Precast Concrete Design and Construction 3
2013/2014 1 MAE 1193 Precast Concrete Design and Construction 3
UNDERGRADUATE LEVEL
Session Semester Course Code Course Name Credit
1998/1999 July SAA 3052 Concrete Laboratory 2
1998/1999 July SAA 2052 Structural Laboratory 2
2000/2001 1 SAA 1012 Mechanic of Statics 2
2000/2001 1 SAA 3052 Structural Laboratory 2
2000/2001 1 SAE 2052 Structural Laboratory 2
2000/2001 2 SAA 3243-3 Structural Concrete Design I 3
2000/2001 2 SAA 3243-4 Structural Concrete Design I 3
2000/2001 2 SAA 2212-3 Mechanic of Materials 2
2000/2001 2 SAA 2212-4 Mechanic of Materials 2
2000/2001 2 SAA 3052 Structural Laboratory 2
2001/2002 1 SAM 1012-3 Mechanic of Statics 2
2001/2002 1 SAM 1012-4 Mechanic of Statics 2
2001/2002 1 SAA 3052 Concrete Laboratory I 1
2001/2002 2 SAC 3051 Concrete Laboratory II 1
2001/2002 2 SAM 2213 Mechanics of Materials & Structures 3
2001/2002 2 SAA 3243 Structural Concrete Design I 3
2002/2003 1 SAM 2213 Mechanics of Materials & Structures 3
2002/2003 1 SAM 1012 Mechanic of Statics 2
2002/2003 2 SAM 2213 Mechanics of Materials & Structures 3
2002/2003 2 SAM 1012 Mechanic of Statics 2
2003/2004 1 SAM 3313-1 Reinforced Concrete Design I 3
2003/2004 1 SAM 3313-4 Reinforced Concrete Design I 3
2007/2008 2 SAB 4333 Reinforced Concrete Design II 3
2007/2008 2 SAB 1213 Applied Mechanics 3
2008/2009 1 SAB 3413 Computer Programming in Civil Engineering 3
2008/2009 1 SAB 3353 Reinforced Concrete Design I 3
2008/2009 2 SAB 3353 Reinforced Concrete Design I 3
2009/2010 1 SAB 3353 Reinforced Concrete Design I 3
2009/2010 2 SAB 2012 Civil Engineering Laboratory I 2
2009/2010 2 SAB 2012 Civil Engineering Laboratory I 2
2009/2010 2 SAB 3353 Reinforced Concrete Design I 3
2010/2011 1 SAB 3353 Reinforced Concrete Design I 3
2010/2011 2 SAB 3353 Reinforced Concrete Design I 3
2010/2011 2 SAB 3353 Reinforced Concrete Design I 3
2011/2012 1 SAB 3353 Reinforced Concrete Design I 3
2011/2012 2 SAB 3233 Structural Steel & Timber Design 3
2012/2013 1 SAB 2223 Mechanic of Materials & Structures 3
2012/2013 1 SKAA 2223 Mechanic of Materials & Structures 3
2012/2013 2 SKAA 2223 Mechanic of Materials & Structures 3
2013/2014 1 SKAA 2223 Mechanic of Materials & Structures 3
2013/2014 1 SKAA 2012 Civil Engineering Laboratory I 2
2013/2014 2 SAB 3353 Reinforced Concrete Design I 3
2013/2014 2 SKAA 2012 Civil Engineering Laboratory I 2
2013/2014 2 SKAA 2223 Mechanic of Materials & Structures 3
2013/2014 2 SKAA 3352 Reinforced Concrete Design I 3
2015/2016 1 SKAA 2012 Civil Engineering Laboratory I 2
2015/2016 1 SKAA 3352 Reinforced Concrete Design I 2
2015/2016 2 SKAA 3352 Reinforced Concrete Design I 2
2015/2016 2 SKAA 2012 Civil Engineering Laboratory I 2
2015/2016 2 SKAA 3031-3 Integrated Design Project II 1
2015/2016 2 SKAA 3031-4 Integrated Design Project II 1
OTHERS
Session Semester Course Code Course Name Credit
2003/2004 2 H23SM3 Structures & Materials III – University of
Nottingham, UK
3
2004/2005 2 H23SM3 Structures & Materials III – University of
Nottingham, UK
3
2005/2006 2 H23SM3 Structures & Materials III – University of
Nottingham, UK
3
Part-Time Student (UTMSPACE)
1. SAA 3052 Concrete Laboratory Session 2001/02 till 2003/04
2. SAM 3213 Civil Engineering Materials Session 2003/04
3. SAB 3353 Reinforced Concrete Design I from Session 2008/09 till now
4. SAB 4022 Research Methodology and Final Year Pre-Project
SUPERVISION
POSTGRADUATE SUPERVISION
Graduated PhD Student
Main Supervisor
1. Noor Nabilah binti Sarbini (2014). Optimization of Steel Fibre Reinforced Concrete as Concrete
Topping in Composite Slab Construction.
2. Mazizah Ezdiani binti Mohamed (2016). Interface Shear Strength of Composite Concrete-to-Concrete
Bond.
Co-Supervisor
1. Ling Jen Hua (2011). Performance of Connections in Precast Concrete Wall Panels under Variable
Loads.
On-Going PhD Students
1. Wan Amizah binti Wan Jusoh (2013 – 2016). Shrinkage Properties of Steel-Polypropylene Fibre
Reinforced Composite Concrete. Main Supervisor.
2. Norhafizan bin Majid (2015 – 2018). Chemical, Rheology and Mechanical Properties of Concrete with
Seaweed. Main Supervisor.
3. Dianah binti Mazlan (2011 – 2014). Co-Supervisor.
4. Seyedmojtaba Ghoreishiamiri (2011 – 2014). Effect of Green Inhibitors on Concrete Properties. Co-
Supervisor.
Graduated Masters (by Research) Student
Main Supervisor
1. Mohammad Khalajmasoumi (2013). Computational Modelling of Hard Polyethylene Precast Panel
for Temporary Support of Tunnel.
2. Noralwani binti Modtrifi (2014). The Mechanical Properties and Shear Performance of Recycled Steel
Tyre Fibres Composite Concrete.
3. Faezah Asmahami binti Othman (2014). The Mechanical Properties of Hybrid Fibre Reinforced
Composite Concrete.
Co-Supervisor
1. Shuhaimi Shaedon (2012). Kelakuan Sambungan Sambat Bersama bar Pilin dan Bar Memanjang
dalam Dinding Konkrit Pratuang.
On-Going Masters (by Research) Student
1. Aminuddin bin Jameran (2014 – 2016). Mechanical Properties of Hybrid Fibre Reinforced Composite
Concrete Subjected to Elevated Temperature. Main Supervisor.
Completed Masters Project
1. Oh Teck Yee (2009). Effect of Surface Roughness and Curing Method on Shear Strength of
Composite Slab.
2. Rohizat Ariffin (2010). Allowable Interface Slip of Composite Slab to Achieve Full Interaction
Behaviour.
3. Mohd. Basri Che Bakar (2010). Shear Strength of Fibre Reinforced Precast Concrete
Composite Slab.
4. Farnoud Rahimi Mansour (2010). Flexural Behaviour of Fibre Reinforced Precast Concrete
Slab.
5. Sajjad Montazer Hojjat (2010). Dynamic Finite Element Analysis of a Steel-Concrete
Composite Floor System with Different Open-Panel Layouts.
6. Albert Vivian s/o Thomas Patrick (2010). Interface Shear Stress Distribution of Composite
Slab for Partial Interaction.
7. Wan Azlan Wan Abdul Rashid (2012). Numerical Analysis on Static Load Capacity of
Prestressed Concrete Sleepers under Hypothetical Bearing Pressure Distribution.
8. Siti Nurbaizura Ali (2012). The Reliability of Development Length Test and Ultimate Load
Test on Prestressed Concrete Sleepers.
9. Lee Kean Teong (2012). Numerical Analysis of Precast Prestressed Hollow Core Slab with
Concrete Topping under Shear Loading.
10. Chong Yee Horng (2012). Finite Element Analysis of Corbel to Beam Connection under Static
Load.
11. Anuar bin Ismail (2013). An Investigation Reliability of Existing Reinforcement Concrete
Structure (Slab) using Non-Destructive Test at Kolej Komuniti Jasin, Melaka.
12. Norhafizan bin Majid (2013). An Investigation Reliability of Existing Reinforcement Concrete
Structure (Beam) using Non-Destructive Test at Kolej Komuniti Jasin, Melaka.
13. Muhammad Affendi bin Bahaudin (2013). Development of Structural Lightweight Concrete Mixed with Bottom Ash.
14. Afham Zulhusni bin Ahmad (2013). Utilizing Silica Fume for Development of Concrete Strength.
15. Mohd. Izaan bin Ghazali (2014). Mechanical Properties of Hybrid Fibre Reinforced Composite
Concrete.
16. Tasnim binti Yakath Ali (2014). Numerical Modelling of Contact Element for Concrete-to-
Concrete Bond.
17. Cheong Lip Sing (2015). Flexural Strength of Fibre Reinforced Concrete Under Elevated
Temperature.
18. Nurul Nadia binti Hasbullah (2015). Comparison between Eurocodes and British Standards
in the Design for Simply Supported Bridge.
19. Marenawati binti Abd. Malek (2015). The Effect of Rice Hush as Sand Replacement on the
Mechanical Properties of Concrete.
20. Nor Hafizah binti Mohd. Suhadis (2015). Mechanical Properties of Concrete by using
Recycle Polyvinyl Chloride (PVC) as Sand Replacement.
21. Aminuddin bin Suhaimi (2015). Inclined Link as Shear Reinforcement in Reinforced Concrete
Beam.
UNDERGRADUATE SUPERVISION
Completed Final Year Project
1. Koo Chee Keong (2002). Analisis Ketahanan Kelesuan bagi Galang Plat Web Beralur.
2. Mohamed Sufian bin Ab. Rahman (2002). Perkembangan Teknologi dan Rekabentuk
Struktur Ruang di Malaysia.
3. Vimel a/l Chelvarajah (2002). Analisis Kelesuan bagi Galang Plat Web Rata Menggunakan
Kaedah Unsur Terhingga.
4. Aidah binti Abd. Shukor (2002). Analisis Lengkokan Tiang Keluli Menggunakan Analisis
Unsur Terhingga.
5. Tengku Azrul Hisham bin Tengku Abidin (2002). Analisis Lenturan Kerangka Ruang
Berbentuk Bulat.
6. Saw Koon Khim (2002). Tegasan Sempadan Web bagi Galang Plat Beralur Menggunakan
Analisis Tak-Linear.
7. Anis Aisya binti Mat Lazim (2003). Kekuatan Muktamad Rasuk Konkrit Bertetulang
Berlubang Servis.
8. Azimah binti Ab Aziz (2003). Kekuatan Muktamad Rasuk Konkrit Bertetulang Berlubang
Servis.
9. Chee Weng Yan (2003). Kekuatan Muktamad Tiang Konkrit Berlubang Servis.
10. Se Thiam Hai (2003). Kekuatan Muktamad Tiang Konkrit Berlubang Servis.
11. Hayder bin Fakharazi (2009). Design Comparison of Precast Prestressed Solid Slab between
British Standard (BS 8110) and Eurocode (EC2).
12. Muhamad Khairi bin Abd Khalil (2009). Kesan Kekasaran Berbentuk Trapezoid Terhadap
Tegasan Ricih Bersentuhan Papak Pratuang dan Penutup Konkrit.
13. Mohd. Basri bin Che Bakar (2009). Kesan Kekasaran Berbentuk Segitiga Terhadap Tegasan
Ricih Bersentuhan Papak Pratuang dan Penutup Konkrit.
14. Ahmad Syawal bin Yahya (2009). Perbandingan Rekabentuk Papak Lompang Konkrit
Pratuang Prategasan Menggunakan BS 8110 dan Eurocode 2.
15. Shukor Ali bin Selamet Ansori (2009). Anjakan Ufuk pada Permukaan Dalam Papak
Pratuang dengan Konkrit Penutup.
16. Noraini binti Mohamed @ Mohamad Lazim (2010). Surface Roughness and Dry Curing
Effect on Composite Slab using the Push-off Test Method.
17. Nur Syazwani binti Zainuddin (2010). Surface Roughness and Wet Curing Effect on
Composite Slab using the Push-off Test Method.
18. Lee Eng Ming (2010). Analysis of Precast Building Skeletal Frame with Rigid Connection.
19. Lim Sook Ling (2010). Analysis of Precast Building Skeletal Frame with Semi-Rigid
Connection.
20. Vikneswaran Thayanandan (2010). Perbandingan Antara Sistem Kekuda Menggunakan
Keluli Terbentuk Sejuk Terhadap Daya Dalaman Anggota.
21. Tay Chi Jing (2011). Structural Behaviour of Semi-rigid Precast Frame Structure Subjected to
Ground Settlement.
22. Yek Nai Chuang (2011). Finite Element Modelling of Precast Wall using Grout-filled Splice
Sleeve Connector.
23. Mohamad Nizar bin Abdonasrah (2011). Toughness of Concrete Reinforced with Recycled
Tire Steel Fibre.
24. Saleh Abdullah Saleh Baras (2012). Determination of Friction Coefficient at the Interface of
Concrete-to-Concrete Bond under Low Normal Stress.
25. Rashed Saleh Mohammed Al-Futaini (2012). Determination of Friction Coefficient at the
Interface of Concrete-to-Concrete Bond under Medium Normal Stress.
26. Faezah Asmahani binti Othman (2012). Mechanical Properties of Normal Strength Concrete
with Recycled Tyre Steel Fibre.
27. Syaidathul Athira binti Rosli (2012). Mechanical Properties of High Strength Concrete with
Recycled Tyre Steel Fibre.
28. Nur Farhana binti Harun (2012). Flexural Behaviour of Composite Concrete Beams with
Industrialised Steel Fibre.
29. Nurul Nadia binti Hasbullah (2012). Flexural Behaviour of Composite Concrete Beams with
Industrialised Steel Fibre.
30. Nurfahana binti Mohd Rosli (2012). Computerised Analysis and Design of Reinforced
Concrete Slab using Visual Basic as Tools.
31. Nur’ Afifi binti Ahmad (2012). Computerised Analysis and Design of Reinforced Concrete
Beam using Visual Basic as Tools.
32. Andrew Tan Cheng Siong (2012). The Influence of Effective Micro Organism (EM) to the
Mechanical Properties of Normal Strength Concrete.
33. Khairul Hazman bin Padil (2013). The Ultimate Loading Capacity of Trapezoidal Shear Key
in Precast Concrete Structures.
34. Hamid Mansoor Ali Bady (2013). The Strength of Shear Key Connections in Precast Concrete
Construction.
35. Aminuddin bin Jameran (2013). Mechanical Properties of Hybrid Fibre Reinforced Concrete
Composite.
36. Nur Ain binti Mustapa (2014). The Mechanical Properties of Steel-Polypropylene Fibre in
Concrete.
37. Zuriana binti Haron (2014). The Mechanical Properties of Steel-Polypropylene Fibre in
Concrete.
38. Siti Hamizah binti Shaiful Yazan (2015). The Mechanical Properties of Steel-Polypropylene
Fibre in Concrete under Elevated Temperature.
39. Siti Nor Aishah binti Abdul Rahim (2015). The Mechanical Properties of Steel-Polypropylene
Fibre in Concrete under Elevated Temperature.
40. Malik bin Mohamad (2015). The Effect of Concrete Coring on the Compressive Strength of
Concrete.
41. Syafiqah binti Rusman (2016). Shear Resistance of Steel Fiber Reinforced Concrete of
Trapezoidal Shear Key.
42. Muhammad Amirul bin Ab Kader (2016). Flexural Behaviour of Concrete Beam Reinforced
with Bundled Bar.
43. Wan Rijalul Asraf bin Wan Adeli (2016). Shear Behavior of Reinforced Concrete Beams with
Separated and Bundled Bar.
Final Year Student Practical Training
1. Semester III Session 2001/02 (Negeri Sembilan and Johor)
2. Semester III Session 2010/2011 (Negeri Sembilan and Johor)
Survey Camp Supervision
1. Semester II Session 2000/01 (Air Tawar, Perak)
2. Semester II Session 2001/02 (Air Tawar, Perak)
3. Semester I Session 2002/03 (Air Tawar, Perak)
4. Semester I Session 2008/09 (Kuala Linggi, Negeri Sembilan)
Student Advisor
Advising 12 undergraduate students on their studies and registration of their course subjects
POSTGRADUATE EXAMINER
M.ENG INTERNAL EXAMINER
1. Yip Chun Chieh. April 2014.
2. Siti Nu Afifah binti Azraai. Developing Guideline for Engineers to Select the Suitable Infill
Materials for Composite Repair of Steel Pipeline. 2016.
PUBLICATIONS
SCOPUS ID: 8702419200
H-INDEX: 4
ISI JOURNAL
1. Jen Hua Ling, Ahmad Baharuddin Abd. Rahman, Izni Syahrizal Ibrahim & Zuhairi
Abd. Hamid (2012). “Behaviour of Grouted Pile Splice Under Incremental Load”.
Construction & Building Materials. 33. pp: 90 – 98. United Kingdom: Elsevier Ltd.
2. Jen Hua LING, Ahmad Baharuddin ABD. RAHMAN & Izni Syahrizal IBRAHIM
(2014). “Feasibility Study of Grouted Splice Connector under Tensile Load”.
Construction and Building Materials. 50. pp: 530 – 539. United Kingdom: Elsevier Ltd.
3. N. N. Sarbini, I. S. Ibrahim, A. A. Saim, A. B. Abdul Rahman, N. F. Harun & N. N.
Hasbullah (2014). “Shear Capacity of Composite Slab Reinforced with Steel Fibre to that
of Fabric Reinforcement in Concrete Topping”. Material Research Innovations. 18 (S6). pp:
S6-236-S6-240. United Kingdom: Maney Publishing.
4. Farnoud Rahimi Mansour, Suhaimi Abu Bakar, Izni Syahrizal Ibrahim, Abdul Kadir
Marsono & Bahram Marabi (2015). “Flexural Performance of a Precast Concrete Slab
with Steel Fiber Concrete Topping”. Construction and Building Materials. 75. pp: 112-120.
United Kingdom: Elsevier Ltd.
5. M. E. Mohamad, I. S. Ibrahim, R. Abdullah, A. B. Abdul Rahman, A. B. H. Kueh & J.
Usman (2015). “Friction and Cohesion Coefficients of Composite Concrete-to-Concrete
Bond”. Cement & Concrete Composites. 56. pp: 1-14. United Kingdom: Elsevier Ltd.
6. Redzuan ABDULLAH, Ahmad Beng Hong KUEH, Izni S. IBRAHIM & W. Samuel
EASTERLING (2015). “Characterization of Shear Bond Stress for Design of Composite
Slab using an Improved Partial Shear Connection Method”. Journal of Civil Engineering
and Management. 21 (6). pp: 720-732. Taylor and Francis.
7. Jen Hua Ling, Ahmad Baharuddin Abd. Rahman, Izni Syahrizal Ibrahim & Zuhairi
Abd. Hamid (2016). “Tensile Capacity of Grouted Splice Sleeves”. Engineering
Structures. 111. pp: 285-296. United Kingdom: Elsevier Ltd.
8. I. S. Ibrahim, K. S. Elliott, R. Abdullah, N. N. Sarbini & A. B. H. Kueh (2016).
“Experimental Study on the Shear Behaviour of Precast Concrete Hollow Core Slabs
with Concrete Topping”. Engineering Structures. (Accepted for Publication).
SCOPUS JOURNAL
1. Kim Elliott, Izni Ibrahim, Farah Abdul Aziz, Richard Robertshaw & Jonathan Paull
(2005). “Precast Concrete Research at the University of Nottingham”. Concrete. 39(8). pp.
11 – 13. The Concrete Society: Surrey. ISSN 0010-5317.
2. Kim S. Elliott, Izni Syahrizal Ibrahim, Roslli Noor Mohamed & Kamaluddin Abdul
Rashid (2008). “Research Developments in Precast Concrete Structures”. Concrete.
42(11). pp. 29 – 33. Surrey: The Concrete Society. ISSN 0010-5317.
3. Farnoud Rahimi Mansour, Sasan Parniani & Izni Syahrizal Ibrahim (2011).
“Experimental Study on the Effects of Steel Fibre Volume on the Mechanical Properties
of SFRC”. Advanced Materials Research. Switzerland: Trans Tech Publications. 214. pp.
144 – 148.
4. Ibrahim I. S. and Che Bakar M. B. 2011. “Effects of Mechanical Properties of
Industrialised Steel Fibres addition to Normal Weight Concrete”. Procedia Engineering.
14. pp. 2616 – 2626. Elsevier Ltd. ISSN 1877-7058.
5. Khalajmasoumi M, Ibrahim I.S, Mohd. Yatim J & Koloor S.S.R (2012). “Nonlinear
Mechanical Analysis of Polymer Fibre Precast Panel for Temporary Support of
Tunnels”. Advanced Materials Research. Switzerland: Trans Tech Publications. 488 – 489.
pp. 547 – 551. ISSN 978-3-03785-382-5.
6. M. Khalajmasoumi, S. S. R. Koloor, A. Arefnia, I. S. Ibrahim, & J. Mohd Yatim (2012).
“Finite Element Analysis of Curvature Precast Polymer Panel for Temporary Support of
Tunnels”. Applied Mechanics & Materials. 229 – 231. pp. 771 – 777. Switzerland: Trans
Tech Publications.
7. M. Khalajmasoumi, S. S. R. Koloor, A. Arefnia, I. S. Ibrahim, & J. Mohd Yatim (2012).
“Explicit Dynamic Simulation of High Density Polyethylene Beam under Flexural
Loading Condition”. Applied Mechanics & Materials. 229 – 231. pp. 2150 – 2154.
Switzerland: Trans Tech Publications.
8. Wail Asim Mohammad Hussain, M. Hanim Osman, A. Latif Saleh & Izni Syahrizal
Ibrahim (2014). “The Application of Drillability Properties in Measuring the Strength of
Hardened Concrete”. International Journal of Applied Engineering Research. 9 (11). pp:
1765-1786. Research India Publication.
9. Maziah Ezdiani Mohamed & Izni Syahrizal Ibrahim. (2015). “Interface Shear Strength
of Concrete-to-Concrete Bond with and without Projecting Steel Reinforcement”. Jurnal
Teknologi (Sciences & Engineering). 75(1). pp: 169-182. Universiti Teknologi Malaysia:
Penerbit UTM Press.
10. Ahmad Baharuddin Abd Rahman, Mahyar Mahdinezhad, Izni Syahrizal Ibrahim &
Roslli Noor Mohamed (2015). “Bond Stress in Grouted Spiral Connectors”. Jurnal
Teknologi (Sciences & Engineering). 77(16). pp: 49-57. Universiti Teknologi Malaysia:
Penerbit UTM Press.
11. Ahmad Baharuddin Abd Rahman, Tan Kee Hong, Izni Syahrizal Ibrahim & Roslli
Noor Mohamed (2015). “Influence of Rectangular Steel Splice-Sleeve for Precast
Concrete Connection”. Jurnal Teknologi (Sciences & Engineering). 77(12). pp: 45-54.
Universiti Teknologi Malaysia: Penerbit UTM Press.
12. Aminuddin Jameran, Izni S. Ibrahim, Siti Hamizah S. Yazan & Siti Nor A. A. Rahim
(2015). “Mechanical Properties of Steel-Polypropylene Fibre Reinforced Concrete under
Elevated Temperature”. Procedia Engineering. 125. pp: 818-824. United Kingdom:
Elsevier Ltd.
13. N. N. Sarbini, I. S. Ibrahim, A. Aziz Saim, M. A. A. Kadir & S. M. Syed Mohsin (2016).
“Development of Shear Stress Equation Contributed by Steel Fibre in Reinforced
Concrete”. APRN Journal of Engineering and Applied Sciences. 11(8). pp: 5445 – 5451.
Asian Research Publishing Network (APRN).
14. Wan Amizah Wan Jusoh, Izni Syahrizal Ibrahim, Abdul Rahman Mohd Sam & Noor
Nabilah Sarbini (2016). “Mechanical and Shrinkage Properties of Hybrid Steel and
Polypropylene Fibre Reinforced Composite Concrete”. Jurnal Teknologi (Sciences &
Engineering). (Accepted for Publication).
NON-INDEXED JOURNAL
1. Izni S. Ibrahim, Kim S. Elliott & Simon Copeland (2008). “Bending Capacity of Precast
Prestressed Hollow Core Slabs with Concrete Toppings”. Malaysian Journal of Civil
Engineering. 20(2). pp. 260 – 283. Johor Bahru: Universiti Teknologi Malaysia. ISSN 1823-
7843.
2. Ahmad Baharuddin Abd. Rahman, Ling Jen Hua, Izni Syahrizal Ibrahim & Zuhairi
Abd. Hamid (2010). “Performance of Grouted Sleeve Connectors Subjected to
Incremental Tensile Loads”. Malaysian Construction Research Journal. Kuala Lumpur:
CREAM. 6(1). pp. 39 – 55.
3. Ling Jen Hua, Ahmad Baharuddin Abd. Rahman & Izni Syahrizal Ibrahim (2010).
“Tensile Performance of Grouted Splice Connectors in Precast Concrete Structures”.
Concrete Plant International (CPI) Trade Journal. United Kingdom. 5(10). pp 160 – 166.
4. Izni Syahrizal Ibrahim, Mohd Basri Che Bakar, Noor Nabilah Sarbini. & Roslli Noor
Mohamed (2011). “Shear Capacity of Steel Fibre Reinforced Concrete Composite Slab”.
Malaysian Journal of Civil Engineering. Johor Bahru: Faculty of Civil Engineering,
Universiti Teknologi Malaysia. 23(1). pp. 1 – 23. ISSN 1823-7843.
5. Izni Syahrizal Ibrahim, Khairul Hazman Padil, Hamid Mansoor Ali Bady, A. Aziz
Saim & Noor Nabilah Sarbini (2014). “Ultimate Shear Capacity and Failure of Shear Key
Connection in Precast Concrete Construction”. Malaysian Journal of Civil Engineering. 26
(3). pp: 414 – 430. Johor Bahru: Faculty of Civil Engineering, Universiti Teknologi
Malaysia. ISSN 1823-7843.
6. Izni Syahrizal Ibrahim, Wan Amizah Wan Jusoh, Abdul Rahman Mohd Sam, Nur Ain
Mustapa & Sk Muiz Sk Abdul Razak (2015). “The Mechanical Properties of Steel-
Polypropylene Fibre Composites Concrete (HyFRCC)”. Applied Mechanics and Materials.
773-774. pp: 949-953. Switzerland: Trans Tech Publication.
7. Ahmad Baharuddin Abd. Rahman, Loh Hsi Yoon, Izni Syahrizal Ibrahim, Roslli Noor
Mohamed, Shahrin Mohammad & A Aziz Saim (2015). “Performance of Grouted Splice
Sleeves with Tapered Bars under Axial Tension”. Applied Mechanics and Materials. 789-
790. pp: 1176-1180. Switzerland: Trans Tech Publication.
8. Wan Amizah Wan Jusoh, Izni Syahrizal Ibrahim, Abdul Rahman Mohd. Sam, Noor
Nabilah Sarbini & Nabila Huda Aizon (2015). “Mechanical Properties of Hybrid Fibre
Reinforced Composite Concrete (HyFRCC)”. Malaysian Journal of Civil Engineering. 27
(3). pp: 466 – 478. Johor Bahru: Faculty of Civil Engineering, Universiti Teknologi
Malaysia.
REFEREED CONFERENCE PROCEEDINGS
1. Izni Syahrizal Ibrahim & Mohd. Hanim Osman (1999). “Static and Fatigue Behaviour
of Trapezoid Web Plate Girder”. Research Seminar on Materials & Construction. Johor
Bahru: Research Management Centre, Universiti Teknologi Malaysia. February.
2. Osman, M H, Ibrahim, I S & Tahir M M (1999). ”Performance Testing on Trapezoid
Web Profile”. The 7th East-Asia Conference on Structural Engineering & Construction. Vol. 1.
Japan: Social Science Institute. August.
3. Osman, M H, Ibrahim, I S & Tahir, M M (1999). Strength Behaviour of Trapezoid Web
Plate Girder. 6th International Conference on Steel and Space Structures. Singapore:
Institution of Engineers Singapore. 1 – 3 September.
4 Izni Syahrizal bin Ibrahim, Mohd. Hanim bin Osman & Sarifuddin bin Saad (2000).
“Tegasan Sempadan Web untuk Rekabentuk Ketahanan Kelesuan bagi Galang Plat
Web Beralur”. Persidangan Kebangsaan Kejuruteraan Awam 99. Lumut: Universiti Sains
Malaysia. January.
5. Izni Syahrizal Ibrahim, Mohd Hanim Osman & Fathoni Usman (2001). “Buckling
Analysis of Plate Girder with Trapezoid Web Subjected to Shear Loading”. 2nd
International Conference on Numerical Analysis in Engineering. Batam: Universiti Sumatera
Utara.
6. Izni Syahrizal Ibrahim & Kim S. Elliott (2006). “Interface Shear Stress of Hollow Core
with Concrete Toppings”. 6th International Conference on Concrete Engineering and
Technology (CONCET). Kuala Lumpur: Institution of Engineers Malaysia.
7. Izni S. IBRAHIM & Kim. S. ELLIOTT (2009). “Long-term Behaviour of Precast
Prestressed Hollow Core Slabs with Concrete Toppings”. Proceedings of the 7th Asia
Pacific Structural Engineering and Construction Conference (ASPEC) and 2nd European Asian
European Engineering Forum (EACEF). 4 – 6 August. pp . 391 – 401. Langkawi, Malaysia.
8. Shuhaime Saedon, Ahmad Baharuddin Abd Rahman, Izni Syahrizal Ibrahim &
Zuhairi Abd Hamid (2009). “Performance of Splice Sleeve Connector with Spiral
Reinforcement Bar under Direct Tensile Load.” Proceedings of the 2nd Construction
Industry Research Achievement International Conference (CIRAIC). 3 – 5 November. Kuala
Lumpur, Malaysia.
9. Jen-Hua Ling, Ahmad Baharuddin Abd. Rahman, Izni Syahrizal Ibrahim & Zuhairi
Abd. Hamid (2009). “Tensile Performance of Modified Hollow Section Splice Sleeve
Connector under Direct Tensile Load”. Proceedings of the 2nd Construction Industry
Research Achievement International Conference (CIRAIC). 3 – 5 November. Kuala Lumpur,
Malaysia.
10. Jen Hua Ling, Ahmad Baharuddin Abd. Rahman, Izni Syahrizal Ibrahim, Zuhairi Abd.
Hamid & Abdul Karim Mirasa (2009). “Structural Performance of Splice Connector for
Precast Concrete Structures.” Proceedings of the 7th Asia Pacific Structural Engineering and
Construction Conference (ASPEC) and 2nd European Asian European Engineering Forum
(EACEF). 4 – 6 August. pp. 402 – 408. Langkawi, Malaysia.
11. Ling Jen Hua, Ahmad Baharuddin Abd. Rahman & Izni Syahrizal Ibrahim (2010).
“Tensile Performance of Grouted Mild Steel Pipe Splice Connector for Precast Concrete
Connection”. Proceedings of the World Engineering Congress. pp. 58 – 62. 2 – 5 August.
Kuching, Sarawak.
12. Shuhaimi 8haedon, Ahmad Baharuddin Abd. Rahman, Izni Syahrizal Ibrahim &
Zuhairi Abd. Hamid (2010). “Structural Performance of Splice Sleeve Connector with
Vertical and Spiral Reinforcement Bar Under Direct Tensile Load”. Proceedings of the
World Engineering Congress 2010. pp. 226 – 235. 2 – 5 August. Kuching, Sarawak.
13. Mohammad Khalajmasoumi, Izni Syahrizal Ibrahim & Jamaluddin Mohammad
Yatim (2011). “Study on the Mechanical Properties of Polymetric Composite
Material in Structures”. Proceedings of the 1st Iranian Students Scientific
Conference in Malaysia. 9 – 10 April. Serdang: Universiti Putra Malaysia.
14. Noralwani Modtrifi, Mohamad Nizar Abdonasrah & Izni Syahrizal Ibrahim (2011).
“The Effect of Size on Toughness Performance of Recycled Steel Fibres Concrete”.
Proceedings of the Research Seminar in Civil Engineering (SEPKA). 13 – 15 September. Johor
Bahru: Universiti Teknologi Malaysia.
15. Noor Nabilah Sarbini, Izni Syahrizal Ibrahim & A. Aziz Saim (2011). “Enhancement on
Strength Properties of Steel Fibre Reinforced Concrete”. Proceedings of the 3rd European
Asian Civil Engineering Forum (EACEF). 20 – 22 September. Yogjakarta: Universitas
Pelita Harapan.
16. Noralwani Modtrifi, Izni Syahrizal Ibrahim & Ahmad Baharuddin Abd. Rahman
(2011). “Mechanical Properties of Concrete Containing Recycled Steel Fibres”.
Proceedings of the 3rd European Asian Civil Engineering Forum (EACEF). 20 – 22 September.
Yogjakarta: Universitas Pelita Harapan.
17. Tan Cheng Siong, Andrew, Ibrahim, Izni Syahrizal & Mohd. Yatim, Jamaluddin (2012).
“Effective Microorganisms for Concrete (EMC) Admixture – Its Effects to the
Mechanical Properties of Concrete”. Proceedings of the AWAM International
Conference on Civil Engineering (AICCE’12) & Geohazard Information Zonation
(GIZ’12). 28 – 30 August 2012. Penang: Universiti Sains Malaysia.
18. N. N. Sarbini, I. S. Ibrahim and A. A. Saim (2012). “Assessment on the Mechanical
Performance of Steel Fibre Reinforced”. 8th RILEM International Symposium on Fibre
Reinforced Concrete (BEFIB 2012). 19 – 21 September 2012. Guimarães, Portugal:
University of Minho.
19. Mazizah Ezdiani Mohamed, Izni Syahrizal Ibrahim, A Aziz Saim & Ahmad
Baharuddin Abd. Rahman (2012). “Influence of Roughness, Cohesion and Friction on
the Interface Shear Strength of Composite Concrete-to-Concrete Bond”. Proceedings of
the 8th Asia Pacific Structural Engineering and Construction Conference (APSEC). 2 – 4
October 2012. Surabaya, Indonesia: Universiti Teknologi Malaysia & Institut Teknologi
Sepuluh Nopember.
20. N. N. Sarbini, I. S. Ibrahim & A. A. Saim (2013). “Shear Behaviour of Composite Slab
Reinforced with Steel Fibre Concrete Topping”. Proceedings of the 13th East Asia-Pacific
Conference on Structural Engineering and Construction. 11 – 13 September 2013. Sapporo,
Japan: University of Hokkaido.
21. F. A. Othman, M. I. Ghazali & A. Jameran & I. S. Ibrahim (2013). “The Mechanical
Properties of Hybrid Fibre Reinforced Composite Concrete”. Proceedings of the 13th East
Asia-Pacific Conference on Structural Engineering and Construction. 11 – 13 September 2013.
Sapporo, Japan: University of Hokkaido.
22. Wan Amizah Wan Jusoh, Izni Syahrizal Ibrahim, Abdul Rahman Mohd Sam & SK
Muiz Sk Abd Razak (2014) “Fresh and Hardened Properties of Concrete Containing
Steel Fibre and Polypropylene Fibre (HyFRCC)”. Tokyo International Conference of
Engineering and Applied Science (TICEAS). TICEAS-345. 17 – 19 December 2014. Tokyo,
Japan: Higher Education Forum.
23. Izni Syahrizal Ibrahim, Wan Amizah Wan Jusoh, Abdul Rahman Mohd Sam, Nur Ain
Mustapa & SK Muiz Sk Abd Razak(2014). “The Mechanical Properties of Steel-
Polypropylene Fibre Composites Concrete (HyFRCC)”. International Integrated
Engineering Summit (IIES) 2014. 1 – 4 December 2014. Batu Pahat, Malaysia: Universiti
Tun Hussein Onn Malaysia.
24. Wan Amizah Wan Jusoh & Izni Syahrizal Ibrahim (2014). “Mechanical Properties Of
Hybrid Fibre Reinforced Composite Concrete. (HyFRCC)”. Research Seminar on Civil
Engineering Research (SEPKA) 2014. 9 – 10 April 2014. Faculty of Civil Engineering:
Universiti Teknologi Malaysia.
25. Mazizah Ezdiani Mohammad, Izni Syahrizal Ibrahim & Redzuan Abdullah (2015).
“Finite Element Modelling of Interface Shear Strength of Concrete-to-Concrete Bond”.
Proceedings of the 9th Asia Pacific Structural Engineering & Construction Conference (APSEC
2015) and 8th Asean Civil Engineering Conference (ACEC 2015). 3-5 November 2015. Kuala
Lumpur, Malaysia: Universiti Teknologi Malaysia. pp: 63-71.
26. A. Jameran, I. S. Ibrahim & N. N. Sarbini (2015). “Toughness Properties of Steel-
Polypropylene Fibre Reinforced Concrete under Elevated Temperature”. Proceedings of
the 9th Asia Pacific Structural Engineering & Construction Conference (APSEC 2015) and 8th
Asean Civil Engineering Conference (ACEC 2015). 3-5 November 2015. Kuala Lumpur,
Malaysia: Universiti Teknologi Malaysia. pp: 628-633.
27. Zuraida Zaini Rijal, Ahmad Baharuddin Abd. Rahman, Roslli Noor Mohamed, Izni
Syahrizal Ibrahim & Sherliza Zaini Sooria (2015). “Comparison of Bond Stresses of
Deformed Steel Bars Embedded in Two Different Concrete Mixes”. Proceedings of the 9th
Asia Pacific Structural Engineering & Construction Conference (APSEC 2015) and 8th Asean
Civil Engineering Conference (ACEC 2015). 3-5 November 2015. Kuala Lumpur, Malaysia:
Universiti Teknologi Malaysia. pp: 131-136.
BOOK CHAPTER
1. Izni Syahrizal Ibrahim, Mohd Hanim Osman & Fathoni Usman (2008). “Chapter 1:
Buckling Analysis of Plate Girder with Trapezoid Web Subjected to Shear Loading”.
Analysis, Design and Performance of Steel Section with Trapezoid Web (Book in Chapters).
Skudai: Penerbit Universiti Teknologi Malaysia. ISBN: 978-983-52-0575-0
THESIS
1. Izni Syahrizal Ibrahim (2008). “Interface Shear Strength of Hollow Core Slabs with Concrete
Toppings” PhD Thesis. University of Nottingham.
2. Izni Syahrizal Ibrahim (2000). “Static and Fatigue Behaviour of Trapezoid Web Plate
Girder” M.Eng Thesis. Universiti Teknologi Malaysia.
3. Izni Syahrizal Ibrahim (1998). “Effects of Wind Loading on Telecommunication Tower (Four
Legged Tower)”. Undergraduate Final Year Project. Universiti Teknologi Malaysia.
RESEARCH ACTIVITIES
RESEARCH GRANTS AS PROJECT LEADER
Date: October 2009 – March 2011 (18 months)
Research Title: Partial Interface Interaction of Precast Slab with Concrete Topping
Grant Type: UTM research grant for New Academic Staff with PhD (NAS)
Vot No.: 77945
Amount (RM): 10,000
Date: April 2011 – July 2012 (15 months)
Research Title: The Mechanical Properties of Recycled Steel Fibres (RSF) in Concrete
Grant Type: Research University Grant (RUG)
Vot No.: 00J82
Amount (RM): 40,000
Date: June 2012 – May 2014 (24 months)
Research Title: The Mechanical Properties and Structural Performance of Hybrid Fibre
Reinforced Composite Concrete
Grant Type: Exploratory Research Grant Scheme (ERGS)
Vot No.: 4L066
Amount (RM): 50,000
Date: June 2012 – May 2013 (12 months)
Research Title: Adhesion and Friction on the Interface Shear Strength of Concrete-to-
Concrete Bond
Grant Type: Research University Grant (RUG)
Vot No.: 06J88
Amount (RM): 40,000
Date: July 2014 – June 2015 (12 months)
Research Title: Plastic Shrinkage Behaviour of Hybrid Fibre Reinforced Composite Concrete
Grant Type: Research University Grant (RUG)
Vot No.: 09H36
Amount (RM): 20,000
Date: July 2014 – October 2016 (28 months)
Research Title: A Study on the Mechanical Properties of Steel-Polypropylene Fibre
Reinforced Concrete Exposed to Elevated Temperature
Grant Type: Fundamental Research Grant Scheme (FRGS)
Vot No.: 4F521
Amount (RM): 79,200
RESEARCH GRANTS AS PROJECT MEMBER
Date: April 2011 – July 2012 (16 months)
Research Title: Transmission Length in Prestressed Concrete
Grant Type: Research University Grant (RUG)
Vot No.: 01J63
Amount (RM): 40,000
Date: April 2011 – July 2012 (16 months)
Research Title: Behaviour of Steel Spiral and Confined Grout in Increasing the Anchorage
Capacity of Precast Concrete Sleeve Connector
Grant Type: Research University Grant (RUG)
Vot No.: 01J80
Amount (RM): 40,000
Date: April 2011 – March 2013 (24 months)
Research Title: Evaluation of Polymer by-Product as Additive in Concrete
Grant Type: Research University Grant (RUG)
Vot No.: 00H78
Amount (RM): 150,000
Date: December 2012 – December 2013 (13 months)
Research Title: Shear Transfer Mechanism of Precast Concrete Half-Joints
Grant Type: Research University Grant (RUG)
Vot No.: 07J01
Amount (RM): 35,000
Date: December 2012 – December 2013 (13 months)
Research Title: Development of Prepacked Concrete with Grout Incorporating Palm Oil Fuel
Ash
Grant Type: Research University Grant (RUG)
Vot No.: 06J80
Amount (RM): 45,000
Date: July 2014 – June 2015 (12 months)
Research Title: The Use of Structural Adhesive in Cold-formed Steel Connection
Grant Type: Research University Grant (RUG)
Vot No.: 09H38
Amount (RM): 20,000
Date: July 2014 – June 2015 (12 months)
Research Title: A Framework for Zero Energy Institutional Building
Grant Type: Research University Grant (RUG)
Vot No.: 09H47
Amount (RM): 20,000
Date: December 2015 – November 2017 (24 months)
Research Title: Development of Proprietary Bar Splice Sleeve for Precast Concrete
Construction
Grant Type: Prototype Development Research Grant Scheme (PRGS)
Vot No.: 4L664
Amount (RM): 180,000
Date: October 2015 – September 2016 (12 months)
Research Title: Fundamental Study on the Properties of Seaweed as Potential Material to
Replace Cement in Concrete
Grant Type: Potential Academic Staff (PAS)
Vot No.: 02K075
Amount (RM): 20,000
Date: April 2015 – March 2017 (24 months)
Research Title: Cellulytic Enzymes from Agro-Waste as Cement Composites for Cool-Island
Building
Grant Type: Japan International Cooperation Agency (JICA)
Vot No.: 4L515
Amount (RM): 21,729.30
Date: May 2015 – April 2017 (24 months)
Research Title: Thermal Behavior of Eco-Aerated Concrete from Agro-Industrial Waste as
Innovative Cool Building Wall Components
Grant Type: Japan International Cooperation Agency (JICA)
Vot No.: 4B189
Amount (RM): 173,358
Date: March 2016 – February 2018 (24 months)
Research Title: Pembinaan Rumah Kos Rendah Menggunakan Struktur Keluli Ringan
Grant Type: Knowledge Transfer Program (KTP)
Vot No.: 4B189
Amount (RM): 133,250
PATENT FILED
1. Ahmad Baharuddin Abdul Rahman, Izni Syahrizal Ibrahim and Ling Jen Hua. Reinforcement
Bar Splicing System (PI 2010 002774)
2. Ahmad Baharuddin Abdul Rahman, Izni Syahrizal Ibrahim and Ling Jen Hua. Grouted Splice
Sleeve System with Steel Plates for Connecting Precast Concrete Members (PI 2010 002775)
CONSULTATION/EXPERT
1. 2007 – 2008: Load Test on Elements and Roof Truss of Coldformed Steel. Client: Koperasi Nusajaya
Sdn. Bhd.
2. 2009: Concrete Material Tests for the RC Structures of the Stadium of Sultan Mizan Zainal Abidin,
Kuala Terengganu. Client: Department of Safety and Health Malaysia.
3. 2010: Structural Assessment of Pulai View Apartment. Client: Pulai View Sdn. Bhd.
4. 2013: Forensic Investigation on the Collapse Ramp at Jambatan Kedua Pulau Pinang. Client:
Department of Safety and Health Malaysia.
5. 2014: Forensic Investigation and Testing on Loji Rawatan Kumbahan Pantai 1, Kuala Lumpur. Client:
Indah Water Konsurtium Sdn. Bhd.
6. 2013 – 2016: IBS Design for IPD Nusajaya. Client: Leaderscope Consultant Sdn. Bhd. &
Department of Works Malaysia (JKR)
7. 2013: Structural Assessment on the Collapse Shop Houses Building at Kukup, Pontian. Client: Majlis
Perbandaran Pontian.
8. 2014: Laboratory Testing and Investigation on Pump House at Sungai Segget. Client: Konsurtium
Paduan – RAR & Iskandar Regional Development Authority (IRDA)
9. 2015: Load Test, Material Testing and Non-Destructive Test (NDT) at SMK Taman Scientex. Client:
RSM Builders Sdn. Bhd.
CAREER DEVELOPMENT
FACILITATOR/PRESENTER
1. Kursus Kontraktor Binaan. Jointly organised by CTMC and CMC Consultants Pahang, 15
– 18 February 2002. Mentakab, Pahang.
2. Kursus Kontraktor Binaan. Jointly organised by CTMC and CMC Consultants Pahang, 4 –
7 May 2002. Mentakab, Pahang.
3. Kursus Juruteknik Makmal. Organised by the Faculty of Civil Engineering, UTM, 22 – 24
April 2003. Seminar Room M46, Faculty of Civil Engineering.
4. IBS 03 Course – Precast Concrete Project Planning and Execution. Organised by the UKM
Holdings. 5 – 6 December 2009. IMREC Johor Bahru.
5. Kursus Kaedah Penyelidikan UTM 2010. Organised by UTM, 14 – 24 June 2010. Blok N24
Universiti Teknologi Malaysia.
6. Kursus Kaedah Penyelidikan UTM 2011. Organised by UTM, 14 – 24 June 2011. Blok N24
Universiti Teknologi Malaysia.
7. IBS 04 Course for Polytechnics Lecturer. Organised by Innovacia Sdn. Bhd., 28 – 29
September 2011. Shah Alam.
8. Analysis and Design of Precast Concrete Structures to Eurocode 2. Organised by JKR
Malaysia, 4 – 6 March 2013 & 1 – 3 July 2013.
9. Analysis and Design of Precast Concrete Structures to Eurocode 2. Organised by JKR
Malaysia, 17 – 19 March 2014, 17 – 19 June 2014 & 7 – 9 October 2014.
10. Introduction to Eurocode 2 Reinforced Concrete Design. Organised by IEM Pahang, 17 – 18
December 2014.
10. Analysis and Design of Precast Concrete Structures to Eurocode 2. Organised by JKR
Malaysia, 30 April – 1 May 2015 & 11 – 13 May 2015.
11. Design Concept and Stability of Precast Concrete Framed Structures (Basic). Organised by
JKR Malaysia, 27 – 29 April 2016.
12. Precast Concrete Component and Connection Design to Eurocode 2 (Intermediate). Organised
by JKR Malaysia, 23 – 25 May 2016.
INVITED SPEAKER
1. How to Construct World Class Concrete Floors & to Avoid Costly Repairs. Organised by
American Concrete Institute, 2 July 2012. Sime Darby Convention Centre, Kuala
Lumpur.
2. Structural Deficiency and the Effects to Structural Capacity in Interactive Course on Non-
Destructive Evaluation (NDE) for Building Condition Assessment (NDE 2016).
Organised by Geoscience and Digital Earth Centre (INSTeG), Universiti Teknologi
Malaysia, 2 – 3 August 2016. Puteri Pacific Hotel Johor Bahru.
3. Pembangunan Akademik dalam Apsek IBS in Seminar IBS. Organised by Cawangan
Kejuruteraan Awam, Struktur & Jambatan, Jabatan Kerja Raya Malaysia, 29 September
2016.
PARTICIPANTS
1. Program Orientasi Kakitangan Baru. Organised by Unit Pembangunan Sumber Manusia,
UTM. 17 June 1998. Bilik Mesyuarat Rumah Tamu Universiti, UTM.
2. Kursus Pengajaran dan Pembelajaran Pensyarah Baru. Organised by Unit Pengajaran
Pembelajaran, Pembangunan Sumber Manusia. 2 – 5 November 1998. Dewan Sultan
Iskandar, UTM
3. Short Course on Steel Design and Construction. Organised by Steel Technology Centre
(STC). 9 – 11 December 1998.UTM City Campus, Kuala Lumpur.
4. Latihan Menyelamat di Air. Organised by Pasukan Pengurusan & Mitigasi Bencana dan
Jabatan Pertahanan Awam, Negeri Johor. Tarikh : 16 December 1998. Pantai Lido, Johor
Bahru.
5. Kursus Kaedah Penyelidikan (SLAB/Persediaan Cuti Belajar). Organised by Unit
Pembangunan Sumber Manusia. 19 – 30 April 1999 and 10 – 11 May 1999. Dewan
Jumaah, Bangunan Pentadbiran, UTM.
6. Kursus Penggunaan Alat Bantu Mengajar Secara Berkesan. Organised by Unit
Pembangunan Sumber Manusia. 5 – 6 September 2000. Dewan Jamuan, Bangunan
Pentadbiran, UTM.
7. Kursus Penulisan Karya Asli. Organised by the Faculty of Civil Engineering. 22 – 24 April
2002. Management Meeting Room. Faculty of Civil Engineering.
8. Bengkel Pengajaran Matapelajaran Rekabentuk. Organised by Department of Structures
and Materials, Faculty of Civil Engineering. 2 May 2002. Hyatt Regency, Johor Bahru.
9. Kursus Bina Negara (BTN )- Kenegaraan bagi Tenaga Pengajar Akademik yang akan
Melanjutkan Pengajian ke Luar Negara. Organised by Biro Tata Negara. 14 – 18 April 2003.
Ulu Sepri, Pedas Negeri Sembilan.
10. Nature of PhD and the Supervision Process. Organised by Graduate School, University of
Nottingham. Academic Year 2003 – 2004. University of Nottingham, UK.
11. Planning Research and Time Management. Organised by Graduate School, University of
Nottingham. Academic Year 2003 – 2004. University of Nottingham, UK.
12. How to Prepare an Effective Poster Presentation. Organised by Graduate School, University
of Nottingham. Academic Year 2005 – 2006. University of Nottingham, UK.
13. Finishing your Thesis and Preparing for the Viva. Organised by Graduate School,
University of Nottingham. Academic Year 2005 – 2006. University of Nottingham, UK.
14. Seminar on Precast Concrete Floors in Steel Framed Buildings. Organised by Bison Concrete
Products Limited (UK). 19 June 2007. Hilton Hotel, Nottingham, UK.
15. Kursus Pembelajaran Dewasa (Adult Learning). Organised by Sekolah Pendidikan
Professional dan Pendidikan Berterusan (UTMSPACE). 16 January 2008. Rumah
Alumni, UTM.
16. Taklimat Keberkesanan Permohonan Penyelidikan FRGS Kitaran 1/2008 Bagi Penyelidik Baru.
Organised by Research Management Centre (RMC), UTM. 17 January 2008. Dewan
Kencana Puri, Pulai Spring Resort.
17. Kursus Penerapan Kemahiran Generik Di Kalangan Pelajar Menerusi P&P. Organised by
Registrar Office UTM. 26 – 27 Februari 2008. Pulai Spring Resort.
18. Kursus Penilaian Tahap Kecekapan DS45/TK3. Organised by Unit Pembangunan Sumber
Manusia, UTM. 29 May 2008 – 9 June 2008. Rumah Alumni UTM.
19. Half Day Course on English Pronunciation. Organised by Registrar Office UTM. 1 July
2008. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL).
20. Seminar Penasihat Akademik Pelajar Tahun 1 Sessi 2008/09. Organised by Registrar Office
UTM. 3 July 2008. Dewan Senat, UTM.
21. 2 Day Workshop on R&D Team CREAM-JKR-CIDB-UTM with Dr. Kim S. Elliott. Organised
by Construction Research Institute of Malaysia (CREAM). 13 – 14 August 2008. Grand
Seasons Hotel, Kuala Lumpur.
22. 4 Day Workshop for Self Assessment Report for the UTMSPACE Part-Time Programme.
Organised by Sekolah Pendidikan Professional dan Pendidikan Berterusan
(UTMSPACE). 16 – 19 April 2009. Hotel Century Melaka.
23. Bengkel Laporan MQA Kursus Sarjana. Organised by Pusat Pengajian Siswazah, Faculty
of Civil Engineering. 14 May 2009. Pulai Spring Resort.
24. Journal Publication Workshop Innovative Construction Research Alliance (ICON). Organised
by Research Management Centre (UTM). 11 – 12 November 2009. Mercure Johor Palm
Resort.
25. Kursus Kepimpinan Pensyarah Muda Siri 2/2009. Organised by Kementerian Pengajian
Tinggi Malaysia. 18 – 23 November 2009. INTAN Sungai Petani (INTURA).
26. A Two Day Design Course & Practical Workshop on The Design of Reinforced and Prestressed
Concrete Structures to Eurocode. Organised by Housing Research Centre, Universiti Putra
Malaysia. 19 – 20 April 2010. Hotel Seri Pacific, Kuala Lumpur.
27. Kursus Penilaian Tahap Kecekapan DS52/TK5. Organised by Urusetia Penilaian Tahap
Kecekapan, UTM. 14 June 2010 and 28 June – 1 July 2010. Arked Kolej 17, Pusat Latihan
UTM.
28. Internal Auditing to MS ISO/IEC 17025. Organised by Alpha Tech Services. 30 – 31 May
2011. Hotel Singgahsana, Selangor.
OTHER CONTRIBUTION
1. 4th place 1998 Football Competition. Faculty player. Organised by Universiti Teknologi
Malaysia.
2. 3rd place 1999 5-Side Football Competition. Faculty Player. Organised by Universiti
Teknologi Malaysia.
3. 2010 Inter-departmental Futsal Competition. Faculty Player. Organised by Universiti
Teknologi Malaysia.
4. 3rd place 2010 Inter-departmental Football Competition. Faculty Player. Organised by
Universiti Teknologi Malaysia.