Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1
CURRICULUM VITAE
YUPING HE
July 2, 2012
Yuping He Curriculum Vitae July 2, 2012
2
A. GENERAL INFORMATION
1. Yuping He, PhD, PEng
Faculty of Engineering and Applied Science
University of Ontario Institute of Technology
2000 Simcoe Street North, Ontario, Canada L1H 7H4
Phone: 905-721-8668 Ext. 5719
Fax: 905-721-3370
E-mail: [email protected]
Homepage: http://www.engineering.uoit.ca/people/he
2. DEGREES
PhD (Mechanical Engineering), Department of Mechanical Engineering, University of
Waterloo, 2003
Dissertation: “Design of Rail Vehicles with Passive and Active Suspensions Using
Multidisciplinary Optimization, Multibody Dynamics, and Genetic Algorithms”
Supervisors: John McPhee and Gordon Andrews
MASc (Automotive Engineering), Department of Automotive Engineering, Tsinghua
University, Beijing, China, 1991
Thesis: “Evaluation of Braking Regulations of Passenger Cars and Analysis of Braking
Performance of Vehicles”
Supervisor: Jingguang Lun
BASc (Automotive Engineering), Department of Automotive Engineering, Hubei
Automotive Industries Institute, China, 1985
3. EMPLOYMENT HISTORY
Date
(mm/yy)
Position/Rank Department/Faculty Institution
07/11~present
07/06~06/11
01/06~05/06
07/05~12/05
04/04~06/05
01/03~12/03
01/03~05/03
Associate Professor
Assistant Professor
Course Instructor
Product Engineer
Postdoctoral Fellow
Postdoctoral Fellow
Course Instructor
Faculty of Engineering and
Applied Science
Faculty of Engineering and
Applied Science
Faculty of Engineering and
Applied Science
World Headquarter
Intelligent Manufacturing
System Centre
Mechanical Engineering
Systems Design Engineering
University of Ontario
Institute of Technology
University of Ontario
Institute of Technology
University of Ontario
Institute of Technology
American Axle and
Manufacturing, USA.
University of Windsor
University of Waterloo
University of Waterloo
Yuping He Curriculum Vitae July 2, 2012
3
09/98~12/02
07/95~08/98
04/91~06/95
09/88~03/91
07/85~08/88
Research Assistant
Associate Professor
Lecturer
Research Assistant
Design Engineer
Mechanical Engineering
Vehicular Engineering
Vehicular Engineering
Automotive Engineering
Technical Centre
University of Waterloo
Beijing Institute of
Technology, China
Beijing Institute of
Technology, China
Tsinghua University,
Beijing, China
Dongfeng Motor
Corporation, China
4. HONOURS
Nomination for Research Excellence Award, University of Ontario Institute of
Technology, 2012
FEAS (Faculty of Engineering and Applied Science) Capstone Design Competition
Award, Faculty Advisor of 1st Place Student Team, 2012
OCE Discovery Connections 2011 Student Competition, Faculty Advisor of the
Top 5 Student Team, 2011
FEAS (Faculty of Engineering and Applied Science) Capstone Design Competition
Award, Faculty Advisor of 3rd
Place Student Team, 2011
Research Excellence Award, Faculty of Engineering and Applied Science, Univer-
sity of Ontario Institute of Technology, 2010
FEAS (Faculty of Engineering and Applied Science) Capstone Design Competition
Award, Faculty Advisor of 1st Place Student Team, 2010
Nomination for Governor-General’s Gold Medal, University of Waterloo, 2003
University of Waterloo Graduate Scholarship, 1999, 2000, 2001, 2002
University of Waterloo Graduate Merit Scholarship, 1999
Scholarship for Overseas Study Sponsored by the Government of China, 1997
Excellent Faculty Member Award, Beijing Institute of Technology, China, 1995
Second Prize for Teaching Achievement, Beijing Institute of Technology, China,
1994
Excellent Paper Award, Beijing Institute of Technology, China, 1994
5. PROFESSIONAL AFFILIATIONS AND ACTIVITIES
Member, Canadian Society for Mechanical Engineering, 2012 ~ present
Member, Society of Automotive Engineers (SAE), 2004 ~ present
Yuping He Curriculum Vitae July 2, 2012
4
Licensed Professional Engineer of Ontario, 2006 ~ present
Member, American Society of Mechanical Engineers (ASME), 2009 ~ present
Member, Professional Lecturers for Higher Education (China), 1997 ~ present
Co-organizer of session on “Active Safety Technologies of Articulated Vehicles”,
Symposium on Advances in Road Vehicles, CSME (Canadian Society for Me-
chanical Engineering) Congress, Winnipeg, Manitoba, Canada, June 4~6, 2012.
Editorial Board Member for International Journal of
- ISRN (International Scholarly Research Network) Mechanical Engineering
International Advisory Committee Member for
- International Conference on Mechanical, Industrial and Energy Engineering
(ICMIEE 2012), Khulna, Bangladesh, December, 2012
International Advisory Committee Member for
- International Conference on Mechanical, Industrial and Energy Engineering
(ICMIEE 2010), Khulna, Bangladesh, December, 2010
Chairman of session “Simulation and Experimental Validation”, FISITA 2012
Congress, Beijing, China, November 27~30, 2012
UOIT Faculty Advisor, CSME (Canadian Society for Mechanical Engineering) 2010
Student Design Competition, Victoria, British Columbia, Canada, June 7 ~ 9, 2010
UOIT Faculty Advisor, CSME 2009 Student Design Competition, Dalhousie Univer-
sity, Halifax, Nova Scotia, Canada, May 31 ~ June 4, 2009
UOIT Faculty Advisor, Baja SAE (Society of Automotive Engineers) International
Competition for Off-Road Vehicles, Tennessee, USA, May 1 ~ 3, 2008
Organizer of the Technical Seminar of
- Green Intelligent Transportation System: the Big Picture (by Dr. Amir Khajepour,
a full professor of the University of Waterloo), UOIT, November 17, 2010
Organizer of the Technical Seminar of
- Investigation of the Thermal Behaviour of Vehicle Disc Brakes by Means of CFD
(by Dr. Hongguang Sun, a senior engineer of GM), UOIT, May, 2007
Reviewer for the Following Journals and Books
- Journal of Sound and Vibration
- Vehicle System Dynamics
- International Journal of Vehicle Design
- Journal of Automotive Engineering (Proc. IMechE, Part D)
- Journal of Multibody Dynamics (Proc. IMechE, Part K)
- Journal of Mechanical Engineering Science (Proc. IMechE, Part C)
Yuping He Curriculum Vitae July 2, 2012
5
- Journal of Computational and Nonlinear Dynamics (ASME Transactions)
- Journal of Vibration and Acoustic (ASME Transactions)
- Simulation Modelling Practice and Theory
- International Journal of Vehicle Systems Modelling and Testing
- Journal of Vibration and Control
- International Journal of Applied Mechanics
- Recent Patents on Mechanical Engineering
- International Journal of Energy Research
- International Journal of Advanced Manufacturing Technology
- SAE Transactions
- CSME Transactions
- Mechanics Based Design of Structure and Machines
- Journal of Zhejiang University – SCIENCE A
- Journal of Group Decision and Negotiation
- John Wiley & Sons (New Book Proposal Review)
Reviewer for the Following Conferences
- FISITA 2012
- SAE 2011 World Congress
- International Conference on Mechanical, Industrial and Energy Engineering
(ICMIEE 2010), Khulna, Bangladesh, December, 2010
Reviewer for Grants, Awards and Technical Proposals
- NSERC (Natural Science and Engineering Research Council Canada) Discovery
Grants (7 Proposals)
- NSERC Idea to Innovation Grants (3 Proposals)
- NSERC Collaborative Research and Development Grant (2 Proposal)
- NSERC Strategic Grant (1 Proposal)
- CFI (Canada Foundation for Innovation) Leaders Opportunity Fund (1 Proposal)
- OCE (Ontario Centres of Excellence) Collaborative Research Grant (1 Proposal)
- OCE Champions of Innovation Research Grant (1 Proposal)
- MRI (Ministry of Research Innovation, Ontario) Innovation Demonstration Fund
Research (1 Proposal)
- Mitacs-Accelerate Internship Proposal
- Assessing a Technical Paper for the Distinguished Scientific Prize at Qassim
University, Kingdom of Saudi Arabia
B. RESEARCH
Yuping He Curriculum Vitae July 2, 2012
6
6. RESEARCH ACTIVITIES
(i) CURRENT RESEARCH INTERESTS
Automated Design Synthesis of Mechatronic Vehicles
- Virtual Prototyping based on Multibody Dynamics and Design Optimization
- Open- and Closed-Loop Vehicle Dynamic System Modelling and Simulation
- Application of Multidisciplinary Design Optimization
- Multiphysics Modelling and Simulation
Road/Rail Vehicle System Dynamics
- Lateral Stability Analysis of High-Speed Vehicles
- Vehicle Vibration Suppression Using Active Suspension Systems
- Integrated Vehicle Control Systems
- Vehicle Safety Standards and Regulations
Active Safety Technologies for Articulated Vehicles
- Active Trailer Steering Systems
- Electronic Stability Control for Articulated Heavy Vehicles
- Articulated Vehicle Driver Behaviour Modelling
- Driver-Vehicle-Highway Interactions
Driver-Hardware-in-the-Loop Real-Time Simulation
Application of Thermal Fluid-Structure Interaction Analysis to Vehicle Design
Electric and Hybrid Vehicles
- Regenerative Braking Systems for Articulated Heavy Vehicles
- Intelligent Power Management Strategies for Hybrid Electric Vehicles
(ii) RESEARCH AWARDS
16) FedDev Applied Research and Commercialization Initiative
- Purpose: Research, Travel, and Publications
- Name of Agency: FedDev Ontario
- Date of Award: June, 2012
- Duration: 2012 ~ 2013
- Title of Project/Award: A New Active Safety Systems for Multi-Trailer
Articulated Heavy Vehicles
- Total Amount of Award: $100,000
- All Investigators: Yuping He (PI)
15) Ontario Partnership for Innovation and Commercialization (OPIC), Proof of
Principle, Phase II
Yuping He Curriculum Vitae July 2, 2012
7
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Partnership for Innovation and Commercialization
- Date of Award: July, 2012
- Duration: 2012 ~ 2013
- Title of Project/Award: Validating and Optimizing Prototype of Active Trailer
Steering Systems for Multi-Trailer Articulated Heavy Vehicles
- Total Amount of Award: $51,400
- All Investigators: Yuping He (PI)
14) NSERC Discovery Grant
- Purpose: Research, Travel, and Publications
- Name of Agency: Natural Science and Engineering Research Council (NSERC) of
Canada
- Date of Award: March, 2012
- Duration: 2012 ~ 2017
- Title of Project/Award: Design of Active Safety Systems for Long Combination
Vehicles Considering Driver-Vehicle-Road Interactions
- Total Amount of Award: $100,000
- All Investigators: Yuping He (PI)
13) Ontario Partnership for Innovation and Commercialization (OPIC), Proof of
Principle, Phase I
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Partnership for Innovation and Commercialization
- Date of Award: July, 2011
- Duration: 2011 ~ 2012
- Title of Project/Award: Development of Active Trailer Steering Systems for
Multi-Trailer Articulated Heavy Vehicles
- Total Amount of Award: $10,000
- All Investigators: Yuping He (PI)
12) OCE Connections Initiative
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Centres of Excellence (OCE) and Genist Systems Inc.
- Date of Award: March, 2011
- Duration: 2010 ~ 2011
- Title of Project/Award: A Test Bed for Development Hydraulic Active Trailer
Systems of Articulated Heavy Vehicles
- Total Amount of Award: $4,500
- All Investigators: Yuping He (PI)
Yuping He Curriculum Vitae July 2, 2012
8
11) OCE Connections Initiative
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Centres of Excellence (OCE) and Genist Systems Inc.
- Date of Award: March, 2011
- Duration: 2010 ~ 2011
- Title of Project/Award: Design of Electronic Trailer Steering for Articulated
Vehicles
- Total Amount of Award: $4,500
- All Investigators: Yuping He (PI)
10) OCE Connections Initiative
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Centres of Excellence (OCE) and ASECO Company
- Date of Award: March, 2011
- Duration: 2010 ~ 2011
- Title of Project/Award: Active Aerodynamics Universal Kit
- Total Amount of Award: $2,000
- All Investigators: Yuping He (PI)
9) OCE Connections Initiative
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Centres of Excellence (OCE) and Genist Systems Inc.
- Date of Award: March, 2010
- Duration: 2009 ~ 2010
- Title of Project/Award: Active Trailer Steering for Multi-Trailer Articulated
Vehicles
- Total Amount of Award: $4,500
- All Investigators: Yuping He (PI)
8) OCE Connections Initiative
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Centres of Excellence (OCE) and String Corporation
- Date of Award: March, 2010
- Duration: 2009 ~ 2010
- Title of Project/Award: Development of an Anti-Roll-Back Braking System for
Vehicles with a Manual Transmission Drive-Line
- Total Amount of Award: $3,500
- All Investigators: Yuping He (PI)
7) NSERC Research Tools and Instrument (RTI)
Yuping He Curriculum Vitae July 2, 2012
9
- Purpose: Equipment
- Name of Agency: Natural Science and Engineering Research Council (NSERC) of
Canada
- Date of Award: March, 2010
- Duration: 2009 ~ 2010
- Title of Project/Award: A Test-Bed for Integrated Control Systems of Multi-
Trailer Articulated Vehicles
- Total Amount of Award: $70,743
- All Investigators: Yuping He (PI)
6) NSERC Collaborative Research and Development (CRD)
- Purpose: Research, Travel, and Publications
- Name of Agency: Natural Science and Engineering Research Council (NSERC) of
Canada
- Date of Award: March, 2010
- Duration: 2009 ~ 2012
- Title of Project/Award: Integrated Design of Multi-Trailer Articulated Vehicles
with Active Trailer Steering Systems
- Total Amount of Award: $42,858
- All Investigators: Yuping He (PI)
5) CFI (Canada Foundation for Innovation) Leaders Opportunity Fund
- Purpose: Equipment
- Name of Agency: CFI, MRI (Ministry of Research and Innovation, Ontario), and
UOIT
- Date of Award: January, 2009
- Duration: 2009 ~ 2010
- Title of Project/Award: A Reconfiguration Motion Base Vehicle Simulator
- Total Amount of Award: $160,018
- All Investigators: Yuping He (PI), Greg Rohrauer, and Ruth Mihman
4) Research Collaboration Contract on Active Safety Technologies for Articulated
Heavy Vehicles
- Purpose: Research, Travel, and Publications
- Name of Agency: Genist Systems Inc.
- Date of Award: February, 2008
- Duration: 2008 ~ 2009
- Title of Project/Award: Development of 3-D Dynamic Models for Long
Commercial Vehicles with Steerable Towbar
- Total Amount of Award: $30,000
Yuping He Curriculum Vitae July 2, 2012
10
- All Investigators: Yuping He (PI)
3) OCE Connections Initiative
- Purpose: Research, Travel, and Publications
- Name of Agency: Ontario Centres of Excellence (OCE) and Mindmatter
Innovates Inc.
- Date of Award: March, 2008
- Duration: 2007 ~ 2008
- Title of Project/Award: Development of a Hydraulic Control System for
Improving Lateral Stability of Car-Trailer Systems
- Total Amount of Award: $4,500
- All Investigators: Yuping He (PI)
2) NSERC Discovery Grant
- Purpose: Research, Travel, and Publications
- Name of Agency: Natural Science and Engineering Research Council (NSERC) of
Canada
- Date of Award: March, 2007
- Duration: 2007 ~ 2012
- Title of Project/Award: Automated Design Synthesis of Mechatronic Vehicles
with Integrated Control Systems
- Total Amount of Award: $92,500
- All Investigators: Yuping He (PI)
1) UOIT Start-up Fund
- Purpose: Research, Travel, and Publications
- Name of Agency: University of Ontario Institute of Technology
- Date of Award: July, 2006
- Duration: 2006 ~ 2008
- Title of Project/Award: Thermal Performance Analysis of Vented Automotive
Brakes Discs
- Total Amount of Award: $40,000
- All Investigators: Yuping He (PI)
(iii) RESEARCH EXPERIENCE
Reconfigurable Robotic System Dynamics and Design, Intelligent Manufacturing
Systems (IMS) Centre, University of Windsor, Canada, April 2004 ~ June 2005.
Hardware-in-the-Loop Simulation for Mechatronic System Behaviour, Intelligent
Manufacturing Systems (IMS) Centre, University of Windsor, Canada, April 2004
~ June 2005.
Yuping He Curriculum Vitae July 2, 2012
11
Stability Analysis and Active Dynamic Control of Articulated Vehicles (with
Timberjack, a John Deere Company), Department of Mechanical Engineering,
University of Waterloo, Canada, January 2003 ~ October 2003.
Design Synthesis of Hydraulic Power Steering Systems of Hydraulic Actuators
(with Timberjack, a John Deere Company), Department of Mechanical Engineer-
ing, University of Waterloo, Canada, January 2003 ~ October 2003.
Symbolic Formulations for Real-Time Simulations of Multibody System Models,
Department of Systems Design Engineering, University of Waterloo, Canada,
November 2003 ~ January 2004.
Lateral Stability Analysis of Rail Vehicles (with Bombardier Inc.), Department of
Mechanical Engineering, University of Waterloo, Canada, 1998 ~1999.
Welding Robot Dynamic Seam Tracking Implementation Using PWM and PID
Control, Department of Mechanical Engineering, University of Waterloo, Canada,
1999 ~ 2000.
Integrated Mechanical and Control Design Process for Mechatronic Systems, De-
partment of Mechanical Engineering, University of Waterloo, Canada, 2000 ~
2001.
Active Vibration Suppression of Mechanical Systems Exposed to Random Excita-
tions, Department of Mechanical Engineering, University of Waterloo, Canada,
2000 ~ 2002.
Computer Simulation and Experiment Validation on Performance Requirements
of Braking Regulations for Passenger Cars (with Beijing Jeep Co. Ltd.), Depart-
ment of Automotive Engineering, Tsinghua University, Beijing, China, 1988 ~
1990.
As a faculty member at the Department of Vehicular Engineering, Beijing Institute of
Technology, I finished the following projects:
Design and Experiment of an Off-Road Vehicle, Supported by the Air Force of
China and Beijing Jeep Co. Ltd., Principal Investigator (PI), 1996 ~ 1998.
Development of Automobile Dynamic Performance and Exhaust Emission Con-
trol Laboratory (China National Key Laboratory), Supported by the Loan from the
World Bank and the Research Grant from Beijing Institute of Technology, Co-PI,
1994 ~ 1998.
Development of Data Acquisition System for Automobile Chassis Dynamometer
Used for Dynamic Performance, Fuel Economy, and Exhaust Emission Test,
Supported by China North Industries Group, PI, 1994 ~ 1998.
Experiment Study of Intelligent Steering Systems of Ground Vehicles, Supported
by China North Industries Group, Co-PI, 1993 ~ 1997.
Yuping He Curriculum Vitae July 2, 2012
12
Design and Experiment Validation of Automatic Transmission Systems, Sup-
ported by China North Industries Group, Co-PI, 1991 ~1995.
(iv) INDUSTRIAL EXPERIENCE
As a product engineer at American Axle and Manufacturing, Detroit, USA, I was en-
gaged in the following projects:
NVH Robustness Design of Vehicle Driving Axles, July 2005 ~ December 2005.
Driveline System Integration for Optimized NVH Performance, August 2005 ~
December 2005.
As a design engineer at the Technical Centre of Dongfeng Motor Corporation, China, I
participated in the following projects:
Modification Designs of Transmission Systems for EQ-140 Trucks, 1986 ~ 1988.
Failure Analysis of Axle Sleeves for Trucks, 1986 ~ 1987.
Indoor Endurance Experiment of Automotive Differential Gears, 1986 ~ 1987.
Residual Stress Measurement and Analysis of Skived Automotive Gears, 1985 ~
1987.
C. SCHOLARLY AND PROFESSIONAL WORK
7. REFEREED PUBLICATIONS
(i) ARTICLES IN REFEREED JOURNALS
[J33] Xuejun Ding, and Yuping He (2012), “Driver-in-the-loop real-time simulation
for the design and validation of SUV differential braking controllers”, submitted
to Simulation Modelling Practice and Theory, Manuscript ID: SIMPAT-D-12-
289.
[J32] Dhruv Oberoi, and Yuping He (2012), “A Design Synthesis Method for Multi-
Trailer Articulated Heavy Vehicles”, submitted to International Journal of Ve-
hicle Performance, Manuscript ID: IJVP-38727.
[J31] Xuejun Ding, and Yuping He (2012), “Design of an Active Safety System for
Multi-Trailer Articulated Heavy Vehicles Using Real-Time Simulations”, under
revision, Journal of Automobile Engineering, Manuscript ID: JAUTO2299.
[J30] Xuejun Ding, and Yuping He (2012), “Numerical Simulation and Analysis of
Closed-Loop Driver/Articulated Vehicle Dynamic Systems”, to appear in the
SAE International Journal of Commercial Vehicles, Paper No: 2012-01-0244.
[J29] Md. Manjurul Islam, and Yuping He (2012), “A Parallel Design Optimization
Method for Articulated Heavy Vehicles with Active Safety Systems”, to appear
in International Journal of Heavy Vehicle Systems, Manuscript ID:
IJHVS2012_5.
Yuping He Curriculum Vitae July 2, 2012
13
[J28] Md. Manjurul Islam, Xuejun Ding, and Yuping He (2012), “A Closed-Loop Dy-
namic Simulation Based Design Method for Articulated Heavy Vehicles with Ac-
tive Trailer Steering Systems”, Vehicle System Dynamics, Vol. 50, No.5, pp. 675-
697.
[J27] Yuping He, and Md. Manjurul Islam (2012), “An Automated Design Method for
Active Trailer Steering Systems of Articulated Heavy Vehicles”, ASME Journal
of Mechanical Design, Vol. 134/041002, pp. 1-15.
[J26] Yuping He, Md. Manjurul Islam, and Timothy D. Webster (2010), “An Integrated
Design Method for Articulated Heavy Vehicles with Active Trailer Steering Sys-
tems”, SAE International Journal of Passenger Cars – Mechanical Systems, Vol.
119-6, pp. 158-174.
[J25] Zhongzhe Chi, Yuping He, and Greg Naterer (2009), “Convective Heat Transfer
Optimization of Automotive Brake Discs”, SAE International Journal of Passen-
ger Cars – Mechanical Systems, Vol. 118-6, pp. 961-969.
[J24] Zhongzhe Chi, Yuping He, and Greg Naterer (2008), “Design Optimization of
Vehicle Suspensions with a Quarter-Vehicle Model”, Transactions of the CSME,
Vol. 32, No. 2, pp. 297-312.
[J23] Zhongzhe Chi, Greg Naterer, and Yuping He (2008), “Effects of Brake Disc
Geometrical Parameters and Configurations on Automotive Braking Thermal
Performance”, Transactions of the CSME, Vol. 32, No. 2, pp. 313-324.
[J22] Yuping He (2008), “Design Synthesis of Mechatronic Vehicles with Coordinated
Control Systems”, Vehicle System Dynamics, Vol. 46, Supplement, pp.923-936.
[J21] Yuping He, and John McPhee (2007), “A Review of Automated Design Synthe-
sis Approaches for Virtual Development of Ground Vehicle Suspensions”, SAE
2007 Transactions, Journal of Passenger Cars – Mechanical Systems, Paper No.
2007-01-0856.
[J20] Yuping He, and John McPhee (2007), “Application of Optimization Algorithms
and Multibody Dynamics to Ground Vehicle Suspension Design”, International
Journal of Heavy Vehicle Systems, Vol. 14(2), pp. 158-192.
[J19] Yuping He, and John McPhee (2007), “Application of SQP and Dynamic Mode
Tracking to the Determination of the Critical Speed of Rail Vehicles”, Interna-
tional Journal of Heavy Vehicle Systems, Vol. 14(2), pp. 193-212.
[J18] Yuping He, Hoda ElMaraghy, and Waguih ElMaraghy (2005), “A Design Analy-
sis Approach for Improving the Stability of Dynamic System with Application to
the Design of Car-Trailer Systems”, Journal of Vibration and Control, Vol. 11,
No. 12, pp. 1487-1509.
[J17] Yuping He, Amir Khajepour, John McPhee, and Xiaohui Wang (2005), “Dynam-
ic Modeling and Stability Analysis of Articulated Frame Steer Vehicles”, Inter-
national Journal of Heavy Vehicle Systems, Vol. 12, No. 1, pp. 28-59.
Yuping He Curriculum Vitae July 2, 2012
14
[J16] Yuping He, and John McPhee (2005), “A Design Methodology for Mechatronic
Vehicles: Application of Multidisciplinary Optimization, Multibody Dynamics,
and Genetic Algorithms”, Vehicle System Dynamics, Vol. 43, No. 10, pp. 697-
733.
[J15] Yuping He, and John McPhee (2005), “Multidisciplinary Design Optimization of
Mechatronic Vehicles with Active Suspensions”, Journal of Sound and Vibra-
tion, Vol. 283/1-2, pp.217-241.
[J14] Yuping He, and John McPhee (2005), “Optimization of Curving Performance of
Rail Vehicles”, Vehicle System Dynamics, Vol. 43, No. 12, pp. 895-923.
[J13] Yuping He, and John McPhee (2005), “Multidisciplinary Optimization of Multi-
body Systems with Application to the Design of Rail Vehicles”, Multibody Sys-
tem Dynamics, Vol. 14, pp. 111-135.
[J12] Yuping He, and John McPhee (2002), “Optimization of the Lateral Stability of
Rail Vehicles”, Vehicle System Dynamics, Vol. 38, No. 5, pp. 361-390.
[J11] Yuping He, and John McPhee (2002), “Design Optimization of Rail Vehicles
with Passive and Active Suspensions: A Combined Approach Using Genetic Al-
gorithms and Multibody Dynamics”, Vehicle System Dynamics, Vol. 37 sup-
plement, pp. 397-408.
[J10] Yuping He, Bobi Zhu, and Zhenggen Jiang (1995), “Computer Simulation and
Experimental Study on Braking Performance of Vehicles”, Automotive Engi-
neering (SAE-China), Vol. 17, No. 5, pp. 296-306.
[J9] Yuping He (1995), “A Study on the Braking Performance of Vehicles”, Journal
of Beijing Institute of Technology, Vol. 21, No. 4, pp. 419-426.
[J8] Yuping He, Zhenggen Jiang, Yidong Zhang, and Bobi Zhu (1994), “Experimen-
tal Study on the Requirement of Braking Force Distribution for Passenger Cars”,
Automotive Engineering (SAE-China), Vol. 16, No. 4, pp. 199-206.
[J7] Yuping He (1994), “A Study on the Teaching Methods for Automobile Design”,
Study on Textbook (in Chinese), Vol. 3, pp. 31-32.
[J6] Yuping He, and Jingguang Lun (1994), “Review on Foreign and Domestic Brak-
ing Regulations of Passenger Cars”, Automotive Engineering (SAE-China), Vol.
16, No. 3, pp. 182-192.
[J5] Yuping He, Zhenggen Jiang, Bobi Zhu, and Zhisheng Yu (1993), “Test Methods
for Identifying Braking Force Distribution Between Motor Vehicle’s Front and
Rear Axles”, Journal of Beijing Institute of Technology, Vol. 13, No. 4, pp. 543-
550.
[J4] Yuping He, Bobi Zhu, and Zhisheng Yu (1993), “The Design of Front and Rear
Brake Line Pressure in Passenger Cars”, Beijing Automotive Engineering, Vol.
79, No. 4, pp. 26-32.
Yuping He Curriculum Vitae July 2, 2012
15
[J3] Yuping He, Bobi Zhu, Zhisheng Yu, and Xiuzeng Li (1993), “Discussions on
Testing Methods for Assessing Brake Force Distribution between Axles”, Auto-
motive Technology (SAE-China), No.6, pp.27-34.
[J2] Yuping He, Bobi Zhu, Zhisheng Yu, and Xiuzeng Li (1992), “An Investigation of
Braking Force Distribution Requirements for Passenger Cars in Braking Stan-
dards”, Automotive Engineering (SAE-China), Vol. 14, No. 4, pp. 248-256.
[J1] Yuping He, Bobi Zhu, and Zhisheng Yu (1992), “Design of Braking Moment Dis-
tribution between Front and Rear Axles of Passenger Cars”, Acta Armamentar II,
the Volume of Tank, Armored Vehicle and Engine (Current Journal Title: Ve-
hicle & Power Technology, in Chinese), ISSN1009-4687, Vol. 48, No. 4, pp.28-
36.
(ii) ARTICLES IN REFEREED CONFERENCE PROCEEDINGS
[C30] Md. Manjurul Islam, and Yuping He (2012), “Design of Articulated Heavy Ve-
hicles with Active Safety Systems”, submitted to 2012 International Conference
on Advanced Vehicle Technologies and Integration (VTI 2012), Changchun,
China, July 16-19.
[C29] Xuejun Ding, and Yuping He (2012), “A New Robust Controller for SUV Diffe-
rential Braking Systems”, submitted to FISITA 2012, Beijing, Manuscript ID:
F2012-F08-019.
[C28] Md. Manjurul Islam, and Yuping He (2012), “Parallel Design Optimization of
Articulated Heavy Vehicles with Active Safety Systems”, submitted to FISITA
2012, Beijing, Manuscript ID: F2012-E13-015.
[C27] Tao Sun, Ebrahim Esmailzadeh, Jing Ren, and Yuping He (2012), “Lateral Sta-
bility Improvement of Car-Trailer Systems Using Active Trailer Braking Con-
trol”, Proceedings of the CSME International Congress 2012, Winnipeg, Mani-
toba, Canada, June 4-6, 2012.
[C26] Md. Manjurul Islam, and Yuping He (2012), “Design Synthesis of Articulated
Heavy Vehicles with Active Safety Systems Using a Parallel Computation Tech-
nique”, Proceedings of the CSME International Congress 2012, Winnipeg, Mani-
toba, Canada, June 4-6, 2012.
[C25] Xuejun Ding, Yuping He, Jing Ren, and Tao Sun (2012), “A Comparative Study
of Control Algorithms for Active Trailer Steering Systems of Articulated Heavy
Vehicles”, 2012 American Control Conference, June 27-June 29, Montreal, Ma-
nuscript ID: 1090.
[C24] Xuejun Ding, and Yuping He (2012), “Design and Evaluation of Active Trailer
Steering Systems of Long Combination Vehicles Using Driver-Software-in-the-
Loop Simulations”, SAE 2012 World Congress, Detroit, Paper No: 2012-01-
0934, USA, April 24-26, 2012.
Yuping He Curriculum Vitae July 2, 2012
16
[C23] Xuejun Ding, and Yuping He (2012), “Numerical Simulation and Analysis of
Closed-Loop Driver/Articulated Vehicle Dynamic Systems”, SAE 2012 World
Congress, Paper No: 2012-01-0244, Detroit, USA, April 24-26, 2012.
[C22] Xuejun Ding, and Yuping He (2011), “An Investigation of Driver Models for
Closed-Loop Dynamic Stability Analysis of Articulated Vehicles”, Proceedings
of 4th
International Conference on Mechanical Engineering and Mechanics, Pa-
per ID: VE0040, Suzhou, China, August 11-12, 2011.
[C21] Dhruv Oberor, and Yuping He (2011), “Simulation-Based Design Synthesis of
Articulated Heavy Vehicle for Improving Maneuverability and Stability”, Pro-
ceedings of 4th
International Conference on Mechanical Engineering and Me-
chanics, Paper ID: VE0040, Suzhou, China, August 11-12, 2011.
[C20] Xuejun Ding, and Yuping He (2011), “Active Trailer Steering for Improving
Maneuverability of Long Combination Vehicles with B-Train Double Configura-
tion”, Proceedings of 23rd
Canadian Congress of Applied Mechanics, Vancouver,
BC, Canada, June 5 to 9, 2011.
[C19] Dhruv Oberor, Md. Manjurul Islam, and Yuping He (2011), “Design Optimiza-
tion of Articulated Heavy Vehicles Using Genetic Algorithms and Multibody
Vehicle Model”, Proceedings of 23rd
Canadian Congress of Applied Mechanics,
Vancouver, BC, Canada, June 5 to 9, 2011.
[C18] Rafay Shamim, Md. Manjurul Islam, and Yuping He (2011), “A Comparative
Study of Active Control Strategies for Improving Lateral Stability of Car-Trailer
Systems”, SAE 2011 World Congress, Paper No: 2011-01-0959, Detroit, MI,
USA, April 14, 2011.
[C17] Md. Manjurul Islam, and Yuping He (2011), “An Optimal Preview Controller for
Active Trailer Steering Systems of Articulated Heavy Vehicles”, SAE 2011
World Congress, Paper No: 2011-01-0983, Detroit, MI, USA, April 14, 2011.
[C16] Md. Manjurul Islam, Yuping He, and Timothy D. Webster (2010), “Automated
Design Synthesis of Articulated Heavy Vehicles with Active Trailer Steering
Systems”, Proceedings of ASME IDETC/CIE 2010, Paper No: DETC2010-
28160, Montreal, Canada, August 15-18, 2010.
[C15] Md. Manjurul Islam, Yuping He, and Timothy D. Webster (2010), “A Com-
pound Lateral Position Deviation Preview Controller for Active Trailer Steering
Systems of Articulated Heavy Vehicles”, Proceedings of CSME Forum 2010
(CD), Victoria, Birtish Columbia, Canada.
[C14] Md. Manjurul Islam, and Yuping He (2009), “Design Synthesis of Heavy Articu-
lated Vehicles with Rearward Amplification Control”, Proceedings of 22nd
Ca-
nadian Congress of Applied Mechanics, Halifax, Canada, May 31 to June 4,
2009.
[C13] Yuping He (2009), “Comparative Study of Design Synthesis Approaches for
Mechatronic Vehicles with Integrated Control Systems”, Proceedings of 22nd
Yuping He Curriculum Vitae July 2, 2012
17
Canadian Congress of Applied Mechanics, Halifax, Canada, May 31 to June 4,
2009.
[C12] Md. Manjurul Islam, and Yuping He (2008), “Stability Optimization of Articu-
lated Frame Steer Vehicles”, Proceedings of 2nd
CIRP Conference on Assembly
Technologies and Systems (CD), Toronto, Canada, pp.498-508, September 21 to
23, 2008.
[C11] Zhongzhe Chi, Yuping He, and Greg Naterer (2008), “Geometrical Optimization
of Vented Brake Discs of Automotive Vehicles”, Proceedings of 2nd
CIRP Con-
ference on Assembly Technologies and Systems (CD), Toronto, Canada, pp.562-
571, September 21 to 23, 2008.
[C10] Zhongzhe Chi, Greg Naterer, and Yuping He (2008), “Thermal Performance
Analysis of Vented Automotive Brake Discs”, Proceedings of CSME Forum
2008, University of Ottawa, Ottawa, Canada (8 pages), June 5 to 8, 2008.
[C9] Yuping He, and John McPhee (2004), “Mechatronic Vehicle Design via Multid-
isciplinary Optimization”, Proceedings of CSME Forum 2004 (CD), University
of Western Ontario, London, Ontario, Canada, pp. 504-513.
[C8] Yuping He, Nasser Lashkarian Azard, Chris Urbaniak, Amir Khajepour, and John
McPhee (2004), “Lateral Stability Analysis and Parameter Estimation of Articu-
lated Frame Steer Vehicles”, Proceedings of CSME Forum 2004 (CD), Universi-
ty of Western Ontario, London, Ontario, Canada, pp. 962-971.
[C7] Yuping He, and John McPhee (2003), “Application of Multidisciplinary Design
Optimization to the Design of Ground Vehicles with Active Suspensions”, Col-
loquium on Computer-Aided Optimization of Mechanical Systems, Erlangen-
Nurenmberg, Germany.
[C6] Yuping He, and John McPhee (2002), “An Integrated Approach Using Genetic
Algorithms, Multibody Dynamics, and LQG Control Algorithm for Design Op-
timization of Ground Vehicles with Active Suspensions”, Proceedings of CSME
Forum 2002 (CD), Queen’s University, Kingston, Ontario, Canada.
[C5] Yuping He, and John McPhee (2001), “Comparative Study of Optimization Algo-
rithms Used in Ground Vehicle Suspension Design”, 6th
U.S. National Congress
on Computational Mechanics, Dearborn, Michigan.
[C4] Yuping He (1994) “Review on Road Vehicle Braking Safety Standards and Reg-
ulations”, Proceedings of Vehicle Braking Symposium (SAE-China), Beijing,
pp.164 ~ 176.
[C3] Yuping He, Bobi Zhu, Yidong Zhang, and Bobi Zhu (1994), “Experimental Study
on Braking Force Distribution for Passenger Cars”, Proceedings of Vehicle
Braking Symposium (SAE-China), Beijing, pp.88 ~ 94.
[C2] Yuping He, Bobi Zhu, Zhisheng Yu, and Xiuzeng Li (1992), “The Research on
Tests for Identifying Braking Force Distribution between Motor Vehicle’s Front
Yuping He Curriculum Vitae July 2, 2012
18
and Rear Axles”, 7th
China Armament Applied Mechanics Symposium, Wuyi
Mountain, Fujian Province, China.
[C1] Zhisheng Yu, Bobi Zhu, and Yuping He (1992), “A Study on Braking Force Dis-
tribution between Front and Rear Axles of Passenger Cars”, Proceedings of the
5th
Vehicle Braking Association Symposium (SAE-China), Fenghua, Zhejiang
Province, China.
8. NON-REFEREED PUBLICATIONS
(i) TECHNICAL REPORTS
[TR4] Phemelo Bogosi, Nicholas Buttery, Phil Fracz, James MacMillan, Jack Wentzel,
and Yuping He (2010), “Active Trailer Low Speed Steering for Long Combina-
tion Vehicles with Fail Safe Mechanical Centralization and Center Locking”,
Technical Report for Genist Systems Inc., Vancouver, Canada, pp. 1-50.
[TR3] Yuping He, and Md. Manjurul Islam (2009), “Design Development of Active
Trailer Steering Systems of Articulated Heavy Vehicles”, Technical Report for
Genist Systems Inc., Vancouver, Canada, pp. 1-23.
[TR2] Junxiang Ng and Yuping He (2008), “Regenerative Braking Systems for Articu-
lated Heavy Vehicles”, Technical Report for Genist Systems Inc., pp. 1-14, July
15, 2008.
[TR1] John McPhee, and Yuping He (2002), “Automated Design of Rail Vehicles with
Active Suspensions”, Final Report for NSERC Industrially Oriented Research
Grant Project (with Bombardier Inc. Saint-Bruno, Quebec), pp. 1-6.
9. PAPERS PRESENTED AT MEETING AND SYMPOSIA
[PP2] Yuping He (2002), “Application of Multi-Body Dynamics, SQP, and Dynamic
Mode Tracking to the Identification of the Critical Speed of Rail Vehicles”,
Graduate Student Research Conference, University of Waterloo, April 1 ~ 5,
2002.
[PP1] Yuping He (2001), “Optimization for Maximizing the Critical Velocity of a Rail
Vehicle”, Graduate Student Research Conference, University of Waterloo, April
4 ~ 6, 2001.
10. INVITED LECTURES
[L3] “Automated Dynamic Synthesis of Mechatronic Systems”, Faculty of Engineer-
ing and Applied Science, University of Ontario Institute of Technology, March
16, 2005.
[L2] “A Design Methodology for Mechatronic Systems: Application of Multidiscipli-
nary Optimization, Multibody Dynamics, and Genetic Algorithms”, Intelligent
Yuping He Curriculum Vitae July 2, 2012
19
Manufacturing Systems (IMS) Centre, University of Windsor, Canada, March 2,
2004.
[L1] “Multidisciplinary Optimization of Mechatronic Systems with Application to the
Design of Ground Vehicles with Active Suspensions”, Department of Mechani-
cal Engineering, University of Saskatchewan, Canada, September 10, 2003.
D. TEACHING ACTIVITIES
13. COURSES TAUGHT AND STUDENTS SUPERVISED
(i) UNDERGRADUATE COURSES TAUGHT
1) UNDERGRADUATE COURSES TAUGHT AT UOIT
o ENGR 3290U- 001: Powertrain Design (I am the faculty member developing this
course at UOIT), Winter 2012, 22 Students
o ENGR 3279U- 001: Kinematics and Dynamics of Machine, Fall 2011, 130 Students
o ENGR 3000U - 001: Automotive Component Design, Winter 2011, 39 Students
o ENGR 4010U - 001: Vehicle Dynamics and Control, Fall 2010, 27 Students
o ENGR 3000U - 001: Automotive Component Design, Winter 2010, 22 Students
o ENGR 4080U: Automotive Systems Design II (Capstone Design Projects), Winter
2010, Supervising 10 Students
o ENGR 3270U - 001: Kinematics and Dynamics of Machines, Fall 2009, 59 Students
o ENGR 3270U - 002: Kinematics and Dynamics of Machines, Fall 2009, 52 Students
o ENGR 3000U - 001: Automotive Component Design, Winter 2009, 30 Students
o ENGR 2430U - 001: Dynamics, Winter 2009, 71 Students
o ENGR 3270U - 001: Kinematics and Dynamics of Machines, Fall 2008, 94 Students
o ENGR 4999U - 022: Design Thesis. Winter 2008, Supervising 5 Students
o ENGR 3000U - 001: Automotive Component Design (I was the faculty member
developing this course at UOIT), Winter 2008, 25 Students
o ENGR 3270U - 001: Kinematics and Dynamics of Machines, Fall 2007, 73 Students
o ENGR 3270U - 002: Kinematics and Dynamics of Machines, Fall 2007, 32 Students
o ENGR 2430U - 002: Dynamics, Winter 2007, 74 Students
o ENGR 3270U - 001: Kinematics and Dynamics of Machines, Fall 2006, 79 Students
o ENGR 3270U - 002: Kinematics and Dynamics of Machines, Fall 2006, 32 students
o ENGR 2860U - 002: Fluid Mechanics, Winter 2006, 71 Students
Yuping He Curriculum Vitae July 2, 2012
20
2) UNDERGRADUATE COURSES TAUGHT AT THE UNIVERSITY OF
WATERLOO
o SYD 382: Modelling and Simulation of Mechanical Systems, Winter 2003
3) UNDERGRADUATE COURSES TAUGHT AT BEIJING INSTITUTE OF
TECHNOLOGY, CHINA
o Vehicle System Dynamics, 1994 ~ 1997
o Vehicle Chassis Design, 1991 ~ 1993
(ii) GRADUATE COURSES TAUTHT AT UOIT
o ENGR 5310G - 001: Advanced Vehicle Dynamics (I am the faculty member
developing this course at UOIT), Spring 2012, 6 Students
o ENGR 5300G - 001: Automotive Engineering, Winter 2011, 10 Students
o ENGR 6004G - 001: Multibody System Dynamics (I was the faculty member
developing this course at UOIT), Winter 2011, 1 Student
o ENGR 5300G - 001: Automotive Engineering, Fall 2009, 14 Students
o ENGR 5300G - 001: Automotive Engineering (I was the faculty member
developing this course at UOIT), Fall 2008, 11 Students
o ENGR 5004G (Directed Studies): Dynamic Modelling and Simulation of Road
Vehicle Systems, Summer 2008, 1 Student
o ENGR 5004G (Directed Studies): Dynamic Modelling and Simulation of Road
Vehicle Systems (I was the faculty member developing this course at UOIT),
Summer 2007, 1 Student
(iii) THESES/PROJECTS SUPERVISED
(a) Postdoctoral Fellows Supervised
1) Name: Xuejun Ding
Project Title: Driver-Hardware-in-the-Loop Real-Time Simulations for Road
Vehicle Design
Date: 09/2010 ~ present
Institution: UOIT
(b) Visiting Researcher
1) Name: Timothy D. Webster
Project Title: A Test Bed for Development Hydraulic Active Trailer Steering
Systems of Articulated Heavy Vehicles
Date: 03/2011 ~ present
Institution: UOIT
Yuping He Curriculum Vitae July 2, 2012
21
(c) Research Associates
1) Name: Mr. Zhongzhe Chi (co-supervision)
Project Title: Convective Heat Transfer Optimization of Automotive Brake Discs
Date: 10/2008 ~04/2009
Institution: UOIT
(d) Doctoral Students Supervised
3) Name: Smitha Vempaty
Dissertation Title: Integrated Control Systems Design Using Driver-Hardware-in-
the-Loop Real-Time Simulations
Date: 05/2012
Institution: UOIT
2) Name: Shenjin Zhu (co-supervision)
Dissertation Title: Automated Design Synthesis of Road Vehicles
Date: 05/2012
Institution: UOIT
1) Name: Md Manjurul Islam
Dissertation Title: Integrated Design of Multi-Trailer Articulated Vehicle with
Active Trailer Steering Systems
Date: 05/2010 ~ present
Institution: UOIT
(e) Master’s Students Supervised
11) Name: Jeremiah Packham
Thesis Title: Development of Monitoring Systems of Trailer Steering Systems of
Articulated Heavy Vehicles
Date: 05/2012
Institution: UOIT
10) Name: Hengda Xiao
Thesis Title: Improvement of Directional Performance of Long Combination
Vehicles Using Wireless Sensor Network Technology
Date: 09/2012
Institution: UOIT
9) Name: Steve Mikaric
Thesis Title: Design Optimization of Active Safety Systems of Road Vehicles Using
Driver-Hardware-in-the-Loop Real-Time Simulations
Date: 05/2012
Institution: UOIT
Yuping He Curriculum Vitae July 2, 2012
22
8) Name: Tao Sun (co-supervision)
Thesis Title: Dynamic Control of Car-Trailer Systems
Date: 05/2011 ~ present
Institution: UOIT
7) Name: Dhruv Oberoi
Thesis Title: Active Safety Systems of Heavy Multi-Trailer Vehicles
Date: 09/2009 ~ 10/2011
Institution: UOIT
6) Name: Joseph Panonessa (co-supervision)
Thesis Title: Dynamic Analysis of Vehicle Control Systems Using Real-Time
Simulations
Date: 09/2009 ~ 08/2011
Institution: UOIT
5) Name: Mario Ruano
Thesis Title: Examination of Sideslip Angle Estimation Algorithms for Vehicle Yaw
Moment Control
Date: 09/2008 ~ 08/2009 (not completed)
Institution: UOIT
4) Name: Md Manjurul Islam
Thesis Title: Design Synthesis of Articulated Heavy Vehicles with Active Trailer
Steering Systems
Date: 01/2008 ~ 04/ 2010
Institution: UOIT
3) Name: Zhongzhe Chi (co-supervision)
Thesis Title: Thermal Performance Analysis and Geometrical Optimization of
Automotive Brake Rotors
Date: 09/2006 ~ 08/2008
Institution: UOIT
2) Name: Xinde Yi
Thesis Title: Development of Data Acquisition System for Automobile Chassis
Dynamometer
Date: 09/1995 ~ 07/1998
Institution: Beijing Institute of Technology, China
1) Name: Qingdong Zhang (co-supervision)
Thesis Title: Implementation of Intelligent Vehicle Steering Systems
Date: 09/1992 ~ 07/1995
Yuping He Curriculum Vitae July 2, 2012
23
Institution: Beijing Institute of Technology, China
(f) External Examiner for Graduate Student Theses
1) Name: Hsueh-Yuan Lu
MASc. Thesis Title: Dynamic Model and Control of Vehicles
Date: 08/2006
Institution: Lakehead University, Ontario, Canada
(g) Graduate Supervisory Committees
7) Name: Jamal Al Sadi
PhD Thesis Title: Processing Issues Causing Colour Mismatch in Plastic
Compounding
Date: March, 2011 ~ present
Institution: UOIT
6) Name: Sayyed Ali Hosseini
PhD Thesis Title: Mechanics of Broaching Operations and the Resultant Surface
Integrity
Date: January 14, 2011 ~ present
Institution: UOIT
5) Name: Ahmet Ziyaettin Ozbilen
MASc. Thesis Title: Life Cycle Assessment of Nuclear Hydrogen Production by
Thermochemical Water Splitting
Date: December 9, 2010
Institution: UOIT
4) Name: Halil Hamut
PhD Thesis Title: TBD
Date: 10/2010 ~ present
Institution: UOIT
3) Name: Mohsen Mousavi
PhD Thesis Title: TBD
Date: 10/2010 ~ present
Institution: UOIT
2) Name: Mohammad Rubyet
MASc. Thesis Title: Profile Extrusion of Wood Plastic Composites and Formulation
Evaluation Using Compression Modeling
Date: 09/2008 ~ 07/2010
Institution: UOIT
Yuping He Curriculum Vitae July 2, 2012
24
1) Name: Hamid Osman Semeralul
MASc. Thesis Title: Advancing the Technology Development for Better Quality
Wood Plastic Composites: Processability Study
Date: 09/2006 ~ 04/2009
Institution: UOIT
(h) Undergraduate Research Assistants Supervised
2) Name: Rafay Shamim
Project Title: Development of Control Systems for Improving the Lateral Stability of
Car-Trailer Systems (NSERC Undergraduate Student Research Award)
Date: 05/2010 ~ 08/2010
Institution: UOIT
1) Name: Junxiang NG
Project Title: Hydraulic Regenerative Braking for Articulated Heavy Vehicle
Systems
Date: 05/2008 ~ 08/2008
Institution: UOIT
(i) Undergraduate Capstone Project Students Supervised
32) Name: Chidzani Pogiso
Project Title: Development of a Test-Bench for Road Vehicle ABS and Differential
Braking Systems
Date: 09/2011 ~ present
Institution: UOIT
31) Name: Godfrey Mazhawidza
Project Title: Development of a Test-Bench for Road Vehicle ABS and Differential
Braking Systems
Date: 09/2011 ~ present
Institution: UOIT
30) Name: Victor Owunne
Project Title: Development of a Test-Bench for Road Vehicle ABS and Differential
Braking Systems
Date: 09/2011 ~ present
Institution: UOIT
29) Name: Man Kang NG
Project Title: Development of a Test-Bench for Road Vehicle ABS and Differential
Braking Systems
Date: 09/2011 ~ present
Yuping He Curriculum Vitae July 2, 2012
25
Institution: UOIT
28) Name: Joshua Versteeg
Project Title: Driver-Hardware-in-the-Loop Real-Time Simulations for Active
Trailer Steering Systems of Articulated Vehicles
Date: 09/2011 ~ present
Institution: UOIT
27) Name: Ryan Thombs
Project Title: Driver-Hardware-in-the-Loop Real-Time Simulations for Active
Trailer Steering Systems of Articulated Vehicles
Date: 09/2011 ~ present
Institution: UOIT
26) Name: Jeremiah Packham
Project Title: Driver-Hardware-in-the-Loop Real-Time Simulations for Active
Trailer Steering Systems of Articulated Vehicles
Date: 09/2011 ~ present
Institution: UOIT
25) Name: Steve Mikaric
Project Title: Driver-Hardware-in-the-Loop Real-Time Simulations for Active
Trailer Steering Systems of Articulated Vehicles
Date: 09/2011 ~ present
Institution: UOIT
24) Name: Jeremy Lasalle
Project Title: Driver-Hardware-in-the-Loop Real-Time Simulations for Active
Trailer Steering Systems of Articulated Vehicles
Date: 09/2011 ~ present
Institution: UOIT
23) Name: Emerson Lucha
Project Title: Design Synthesis of a Differential Braking System for Car-Trailer
Systems
Date: 09/2011 ~ present
Institution: UOIT
22) Name: Gregory Nirmatakumar
Project Title: Design Synthesis of a Differential Braking System for Car-Trailer
Systems
Date: 09/2011 ~ present
Institution: UOIT
21) Name: Andre Kunynetz
Yuping He Curriculum Vitae July 2, 2012
26
Project Title: Design Synthesis of a Differential Braking System for Car-Trailer
Systems
Date: 09/2011 ~ present
Institution: UOIT
20) Name: Mandy Anastasopoulos
Project Title: Design Synthesis of a Differential Braking System for Car-Trailer
Systems
Date: 09/2011 ~ present
Institution: UOIT
19) Name: Peter Luc
Project Title: Design Synthesis of a Differential Braking System for Car-Trailer
Systems
Date: 09/2011 ~ present
Institution: UOIT
18) Name: Eric Henderson
Project Title: Design of Electronic Trailer Steering for Articulated Vehicles
Date: 09/2010 ~ 2011
Institution: UOIT
17) Name: Naveed Khan
Project Title: Design of Electronic Trailer Steering for Articulated Vehicles
Date: 09/2010 ~ 2011
Institution: UOIT
16) Name: Rafal Dabkowshi
Project Title: Design of Electronic Trailer Steering for Articulated Vehicles
Date: 09/2010 ~ 2011
Institution: UOIT
15) Name: Ankit Agrawal
Project Title: Design of Electronic Trailer Steering for Articulated Vehicles
Date: 09/2010 ~ 2011
Institution: UOIT
14) Name: Rafay Shamim
Project Title: Design of Electronic Trailer Steering for Articulated Vehicles
Date: 09/2010 ~ 2011
Institution: UOIT
13) Name: Chris Chimienti
Project Title: Active Aerodynamics Universal Kit
Yuping He Curriculum Vitae July 2, 2012
27
Date: 09/2010 ~ 2011
Institution: UOIT
12) Name: Greg Walker
Project Title: Active Aerodynamics Universal Kit
Date: 09/2010 ~ 2011
Institution: UOIT
11) Name: Karl Marcotte
Project Title: Active Aerodynamics Universal Kit
Date: 09/2010 ~ 2011
Institution: UOIT
10) Name: Graeme Ackersviller
Project Title: Development of an Anti-Roll-Back Braking System for Vehicles with
a Manual Transmission Drive-Line (3rd
place in OCE Connections Initiative Compe-
tition at UOIT)
Date: 09/2009 ~ 04/2010
Institution: UOIT
9) Name: Alex Davidovic
Project Title: Development of an Anti-Roll-Back Braking System for Vehicles with
a Manual Transmission Drive-Line
Date: 09/2009 ~ 04/2010
Institution: UOIT
8) Name: Vatsal Grandhi
Project Title: Development of an Anti-Roll-Back Braking System for Vehicles with
a Manual Transmission Drive-Line
Date: 09/2009 ~ 04/2010
Institution: UOIT
7) Name: Zain Hussain
Project Title: Development of an Anti-Roll-Back Braking System for Vehicles with
a Manual Transmission Drive-Line
Date: 09/2009 ~ 04/2010
Institution: UOIT
6) Name: Shah Nabi
Project Title: Development of an Anti-Roll-Back Braking System for Vehicles with
a Manual Transmission Drive-Line
Date: 09/2009 ~ 04/2010
Institution: UOIT
5) Name: Phemelo Bogosi
Yuping He Curriculum Vitae July 2, 2012
28
Project Title: Active Trailer Steering for Multi-Trailer Articulated Vehicles (1st
place in FEAS capstone design competition, UOIT, 2009)
Date: 09/2009 ~ 04/2010
Institution: UOIT
4) Name: Nicholas Buttery
Project Title: Active Trailer Steering for Multi-Trailer Articulated Vehicles
Date: 09/2009 ~ 04/2010
Institution: UOIT
3) Name: Phil Fracz
Project Title: Active Trailer Steering for Multi-Trailer Articulated Vehicles
Date: 09/2009 ~ 04/2010
Institution: UOIT
2) Name: James MacMillian
Project Title: Active Trailer Steering for Multi-Trailer Articulated Vehicles
Date: 09/2009 ~ 04/2010
Institution: UOIT
1) Name: Jack Wentzell
Project Title: Active Trailer Steering for Multi-Trailer Articulated Vehicles
Date: 09/2009 ~ 04/2010
Institution: UOIT
(j) Undergraduate Thesis Students Supervised
9) Name: Janarthanan Ratnam
Project Title: Design of Self Steering Axles for B-Dolly
Date: 01/2009 ~ 04/2009
Institution: UOIT
8) Name: Andy Kai Fai Pang
Project Title: Design and Implementation of an Active Lateral Stability Control
System for Vehicle Trailer Systems (3rd
place in the OCE Connections Forum
Competition at UOIT)
Date: 01/2008 ~ 04/2008
Institution: UOIT
7) Name: Hasan Ahmed
Project Title: Design of a New Hitch System for Heavy Vehicle Mechanisms
Date: 01/2008 ~ 04/2008
Institution: UOIT
6) Name: Qasim Ali
Yuping He Curriculum Vitae July 2, 2012
29
Project Title: Design and Analysis of Virtual Prototype Development for Truck
with an Improved Hitch System Assembly
Date: 01/2008 ~ 04/2008
Institution: UOIT
5) Name: Steve Whalley
Project Title: Analysis of a Heavy Articulated Vehicle
Date: 01/2008 ~ 04/2008
Institution: UOIT
4) Name: Alvin Woo
Project Title: Passive Systems for Improving Lateral Stability in a Class II Vehicle
Trailer
Date: 01/2008 ~ 04/2008
Institution: UOIT
3) Name: Steven D.C. Anderson
Project Title: Development of a Semi-Active Vehicle Suspension System
Date: 01/2007 ~ 04/2007
Institution: UOIT
2) Name: Syed Sarmad Ahmed
Project Title: Virtual Prototype Development of a Heavy Truck Differential Sys-
tem
Date: 01/2007 ~ 04/2007
Institution: UOIT
1) Name: Marco Antonelli
Project Title: Active Control Implementation for Improving Lateral Stability of Ve-
hicle Trailer System
Date: 01/2007 ~ 04/2007
Institution: UOIT
E. SERVICE AND ADMINISTRATIVE POSITIONS
14. (i) UNIVERSITY SERVICE
o UOIT Faculty Member Research Excellence Award Selection Committee, 2011
o UOIT Ontario Trillium Scholarship Committee, 2011
o UOIT-MRI (Ministry of Research and Innovation) PDF (Post-Doctoral Fellow) Se-
lection Committee, 2010
Yuping He Curriculum Vitae July 2, 2012
30
o Ad Hoc Lab and Space Committee, Faculty of Engineering and Applied Science,
UOIT, 2010
o Graduate Studies Committee, Faculty of Engineering and Applied Science, UOIT,
2009~ present
o Automotive, Manufacturing & Mechanical Engineering Program Committee, Faculty
of Engineering and Applied Science, UOIT, 2009 ~ present
o Ad Hoc Committee of Committees, Faculty of Engineering and Applied Science,
UOIT, 2009
o Ad Hoc Lab and Space Committee, Faculty of Engineering and Applied Science,
UOIT, 2008 ~ 2009
o Undergraduate Awards and Scholarships Committee, Faculty of Engineering and Ap-
plied Science, UOIT, 2007 ~ 2008
o Research Award Committee, Faculty of Engineering and Applied Science, UOIT, 2007
o Graduate Awards and Scholarships Committee, Faculty of Engineering and Applied
Science, UOIT, 2006 ~ 2007
o Writing More Than 26 Reference Letters for UOIT Faculty Members, Graduate and
Undergraduate Students, 2006 ~ present
o Reassessment of a Student’s Final Exam and Course Project for the Course of ENGR
5330G (Automotive Powertrains), August, 2010
o Laboratory Tours for Visitors of UOIT Connects 2010, May 4, 2010
o UOIT Graduate Information Fair, UOIT, January 18, 2010
o 2009 Ontario Undergraduate Fair, Toronto, September 26, 2009
o Ontario Engineering Graduate Studies Fair, Ryerson University, Toronto, October 16,
2008
o UOIT Representative for 2008 APMA (Automotive Parts Manufacturers Association,
Canada) Annual Conference, Hamilton, Ontario, Canada, April 30, 2008.
o 2007 Ontario University Fair, Toronto, September 29, 2007
o Ontario Engineering Graduate Studies Fair, University of Waterloo, September 22,
2007
o Ontario Engineering Graduate Studies Fair, University of Toronto, February 24, 2007