Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
CURCULUM VITAE
A. PERSONAL DETAILS
1. Name :Jezan bin Md Diah
2. Date of Birth : 30-10-1985 Place: Kulim, Kedah, Malaysia
3. Sex: Female
4. Office Address : Faculty of Civil Engineering, University Teknologi Mara,
40450 Shah Alam, Selangor, Malaysia
5. Tel: :
6. E-mail :
B. ACADEMIC QUALIFICATION
No. Name of Institution Degree/Qualification Date awarded
1. Universiti Teknologi Mara
Malaysia (UiTM)
Ph.D in Civil Engineering 2012
2. Stuttgart Uni. of App.Sc. M.Sc. Photogrammetry &
Geoinformatics
2003
3. Universiti Teknologi Mara
Malaysia (UiTM)
B.Eng. (Hons)(Civil) 2000
4. Universiti Teknologi Mara Malaysia (UiTM)
Diploma Kejuruteraan Awam
1996
C. PROFESSIONAL MEMBERSHIPS
Bil Keahlian Tahun Institusi
(Membership) (Year) (Institution) 1. Ordinary
Member 22 Nov. 2007 - The Road Engineering Association
of Asia
Sekarang & Australasia (REAAA) 2. Ordinary
Member 7 Ogos 2007 - Road Engineering Association of
Malaysia
Sekarang (REAM) 3. Associate Fellows 1 Nov. 2004 - 31
Okt. Malaysia Institute of Transport (MiTRANS)
2006
D. RESEARCH AND PUBLICATION
Bidang - Traffic Engineering, Transportation Modelling and Simulation and Geographical Information System (GIS)
RESEARCH FUNDINGS (State whether Principal/Co-Researcher)
NATIONAL LEVEL ACTIVE RESEARCH FUNDING (MOSTI/FRGS & Others) Bil
Research Project
Source
Total Funds
Begin End Year
Year
Principal-Researcher, Research on Pilot Study of High Capacity Buses in Malaysia.
Contract Research 26
May 31 Dec.
1.
from SCANIA
RM51,858.89
2017
2016
MALAYSIA
(On going)
SDN. BHD.
Co-Researcher, Development
of Toll Rates Decision Model for Highway.
Contract Research from MALAYSIAN HIGHWAY AUTHORITY
31 Aug. 18
Dec.
2.
RM232,788.72
2017
2015
(On going)
Contract
Principal-Researcher, GSI
Research 30 Nov.
from
19
Okt.
3.
RM140,431.45
2016
Survey for Prasarana Group of
PRASARANA
2015
(Completed)
Companies.
MALAYSIA
BHD.
Co-Researcher, The Effect of
30 June Moisture Damage on the Water
FRGS, RMI,
01
July
4.
RM115,550
2017
Sensitivity due to Moisture
UiTM
2014
(On going)
Damage of Warm Porous Asphalt
Mix
Co-Researcher, Development of
PRGS, RMI, 01
Ogos 01 Feb.
2015
5.
Prototype for 3D User Interactive
RM386,000
UiTM
2012
(Completed)
Ergonomic Highway Design and
Performance Software
Principal-Researcher, An
31 Dec. Exploration
of Driving Simulator
ERGS, RMI,
1 July.
6.
RM80,000
2014
towards Malaysian Driver
UiTM
2012
(Completed)
Behaviour
7.
Co-Researcher, Axial Load and FRGS, RMI,
RM80,000
15 Apr.
15 Oct. 2014
Road Condition Relationship
UiTM
2012
(Completed)
Model
Principal-Researcher, Safety,
31 Aug.
Ergonomic and Effectiveness
FRGS, RMI,
1
Sept.
8.
RM50,000
2012
Evaluation of Speed Hump
UiTM
2010
(Completed) Design
DANA KECEMERLANGAN UIT
E. CONSULTATION/SERVICES/OTHERS
Research
Project
Source
Total Funds
Begin
End Year Year
Member, Penceramah Dalaman bagi Kursus
Audit Keselamatan Jalanraya-
Rekabentuk Awalan. Other members involved: Dr Akram (FKA) En Samad (FKA)
Pihak MIROS
Professional Services for
26
27 Sept.
1.
DEWAN
RM2,100.00
Sept.
2017
BANDARAYA
2017
(Completed)
KUALA LUMPUR
Bil
Research Project
Source
Total Begin End Year
Funds
Year
Co-Researcher, Visual Analysis
Dana
31 March.
of Pedestrian Movement: Using
1 Oct.
1
Kecemerlangan,
RM10,000
2013
Tracking Technologies in
2011
RMI, UiTM
(Completed) Shopping
Mall
Principal-Researcher,
Exploration
of Video
Taping and Dana 1 Nov.
31 Jan. 2010
2
Data
Reduction at Weaving
Kecemerlangan,
RM10,000
2008
(Completed) Section of Malaysian
Conventional
RMI, UiTM
Roundabout in Shah Alam City
(DBKL)
Member, Penceramah
Dalaman bagi Kursus Audit Professional
Keselamatan Jalanraya- Services for
11
12 Sept.
2.
Perancangan
Pembangunan DEWAN
RM2,100.00
Sept.
2017
Projek.
BANDARAYA
2017
(Completed) Other members
involved:
KUALA LUMPUR
Dr Akram (FKA) (DBKL)
En Samad (FKA)
Member, Program
Pembangunan Kapasiti Professional
Vendor Bumiputera oleh Services for
3.
Agensi
Teknikal. KEMENTERIAN 27 31 Dec. Other members
involved:
KEUSAHAWANAN
RM305,280.00
June
2017
Pn Azlina (Head -FP) ANTARABANGSA 2016 (On going)
Cik Elma
(FKA) & INDUSTRI En. Elmi (FKA)
Dr Shahrin (FP)
Member, Eco Driving and
Professional
Safety Practices for
Heavy
Services for
Vehicle
Drivers.
NEGERI
Other members
involved:
17 Nov.
4.
SEMBILAN
17
Nov.
Pn Azlina (Head -FP)
RM23,320.00
2016
CEMENT
2015
Cik Elma
(FKA)
(Completed)
INDUSTRIES
En. Elmi (FKA)
NUMBER OF POSTGRADUATE STUDENTS SUPERVISED
No. Students Name Institutions Level Status
1.
Nurul Qastalani Radzuan
Faculty of Civil
Master
Complete as
Engineering, UiTM
(by Research)
Co-
supervisor
2.
Nor Izzah Zainuddin
Faculty of Civil
Master
Complete as
Engineering, UiTM
(by Research)
Co-supervisor
Faculty of Civil
Master
Complete as
3.
Ismasazeni bte Ismail
Main
Engineering, UiTM
(by Dissertation)
Supervisor
Raihan
Aida binti Abd
Faculty of Civil
Master
Complete as
4.
Main
Wahab
Engineering, UiTM
(by
Dissertation)
Supervisor
Faculty of Civil
Master
Complete as
5.
Fathiyah binti Roslee
Main
Engineering, UiTM
(by Research)
Supervisor
6.
Tuan Badrul
Faculty of Civil
Ph.D On-going as
Engineering, UiTM
(by Research)
Co-
Supervisor
7. Nadiah Mohamed Faculty of Civil Ph.D On-going as
Engineering, UiTM
(by Research)
Co-Supervisor
Muhammad
Firdau
s bin
Master
On-going as
8.
MiTRANS, UiTM
Main
Abd Rashid
(by Research)
Supervisor
Uni.Tun Hussein
Onn
Master
On-going as
9.
Mohd Shafie bin
Nemmang
Main
Malaysia (UTHM)
(by Research)
Supervisor
Mohd Shaharuddi
n bin
Master
On-going as
10.
MiTRANS, UiTM
Main
Osmin
(by Research)
Supervisor
Nur
Quratul Aini binti
Faculty of Civil
Master
On-going as
11.
Main
Hamidun
Engineering, UiTM
(by Research)
Supervisor
NUMBER OF THESIS EXAMINED
No
. Students Name Institutions Level Status
1.
Noorita Sahmiran
FSPU, UiTM
Master Complete as
(by Research)
Panel
2.
Ab Mughni B Ab Rahim
Faculty of Civil
Master Complete as
Engineering,
UiTM
(by Research)
Panel
3. Nur’aadila binti Kaman
Faculty of Civil Master
Complete as Engineering,
UiTM (by Dissertation)
Panel
4.
Osama
Mahmoud Yassenn MiTRANS, UiTM
PhD
(by Research)
Complete as
Al-Husyni
Panel
5.
Ismail bin
Maarof
FSPU, UiTM
PhD On-going as
(by Research)
Panel
F. SELECTED PUBLICATIONS
Md. Diah, J., Mohd Sharif, S., Wan Mohamed, W. M., Osmin, M. S.,
Hamidun, N. Q. A. (2017). Long Bus Vehicle Rear Swing Out Impact
Assessment Using On-Board Video Camera. ISSN: 2050-7399, International
Journal of Supply Chain Management (IJSCM), Vol. 6.
Osmin, M. S., Md. Diah, J., Mohd Sharif, S. (2017). The Opportunities and
Challenges Overview: Implementing Performance Based Standards
Regulation for High Capacity Passenger Vehicle in Malaysia. Journal of the
Society of Automative Engineers Malaysia (JSAEM) (eISSN: 2550-2239 – Vol. 1, Issue 3, Sept. 2017.
Khabiri M.M., Elahizadeh, M., and Md Diah, J. (2016). “Statistical Analysis of Two-lane Roundabout Data for Traffic Control Decision-Making in an Urban Area”, Volume 4, issue 1, Summer 2016, pp. 27-39.
Md Diah, J., Li Sian, T. and Roslee, F. (2016). “An Overview of Lane Changing Model at Signalized Intersection”, ISSN: 1675-7017, SMRJ: Volume 13, No.2, Dis.2016.
Chek Mat, M.S., Md Diah, J., Mohd Din, M.A., and Samad A.M. (2014). “Data acquisition and representation of leaves using digital close range photogrammetry for species identification.” Control and System Graduate Research Colloquium (ICSGRC), 2014 IEEE 5th, 108-113.
Md Diah, J., Radzuan, N.Q., Sujah, S., Adnan, M.A., Mustafa, M. and Samad, A.M. (2014). “The Development of Lane Changing Model in Approaching Heavy Vehicles at Signalized Junction.” 9th Malaysian Road Conference "GREENING OUR ROADS" Sunway Pyramid Convention Centre. 10 - 12 November 2014.
Arshad, A.K., Md Diah, J., and Mohamed Khalil, S. (2013). “Developing and validating HMA Workability Prediction Model for Determining the best Paddle as a Machine component for Workability Device.” International Journal of Engineering and Advanced Technology (IJEAT).
Ahmad Kamil Arshad, Md Diah J., Salah Khalil (2013). “Modelling Workability of Asphalt concrete Performance at different Temperatures using A Statistical Model.” International Journal of Engineering & Technology (IJET).
Md Diah, J., Adnan, M. A., Mustafa, M., and Abdul Hamid, N. (2012). “An Innovation of Warning Triangle Light System Design.” The 12th Asia-Pacific ITS Forum & Exhibition, 2012, Kuala Lumpur, Malaysia.
Zainuddin, I., Adnan, M.A., and Md Diah, J. (2012). “The Optimization of Speed Control Hump: A Case Study in Malaysia Residential Streets.” 2012 IEEE Colloquium on Humanities, Science and Engineering Research (CHUSER 2012), Kota Kinabalu, Sabah, Malaysia 3-4 Dec. 2012.
Md Diah, J., Ahmad, J., and Mukri, M. (2012). “The Methodology on Statistical Analysis of Data Transformation for Model Development.” International Journal of Statistics and Applications. Scientific & Academic Publishing. pp. 94-100.
Md Diah, J., Abdul Rahman, M.Y., Adnan, M.A., and Zahrullaili Yahya, Z. (2011). “Relationship between Roadway Design (Geometric Parameters) and Flow Characteristics in Evaluating Performance of Conventional Roundabout.” 2011 IEEE 7th International Colloquium on Signal Processing and its Applications. Pulau Pinang Penang, Malaysia. 04 Mar - 06 Mar 2011.
Abdul Hamid, N., Zainuddin, A., Sham, R., and Md Diah, J., (2011). “Enhancing the Promotional Strategies of Park -and -Ride Schemes in Kuala Lumpur Conurbation: A Gap Analysis.” Journal of the Eastern Asia Society for Transportation Studies, Vol.9, 2011.
Md Diah, J., Abdul Rahman, M. Y., Adnan M. A., and Hooi Ling, K., (2011) “Modeling the Relationship between Geometric Design and Weaving Section Flow Process of Conventional Roundabouts.” Journal of Transportation Engineering, Vol. 137, No. 12, December 1, 2011. ©ASCE, ISSN 0733-947X/.
Md Diah J., Abdul Rahman M.Y, Adnan M.A and Atan I. (2010), Weaving Section Flow Model at Weaving Area of Malaysian Conventional Roundabout, Journal of Transportation Engineering. August 2010. Volume 136, Number 8, Pg. 782-792. ISSN 0733-947X.