Crysteel Truck Equipment Jim Wyatt 1130 73rd Ave NE ... · Add for 1 Buyers 1492115 4.6" round LED flood light installed $ 206.46 Add for 1 ECCO 5580A Mini Light Bar installed on

Vendor Name: Crysteel Truck EquipmentContact Person: Jim Wyatt Street Address: 1130 73rd Ave NEP.O. Box:City, State, Zip Fridley, MN 55432Phone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

5.0 DUMP BODYMake Crysteel

Warranty 5 year

Date & I.D. of Price List

Discount to be applied to Price List 0%

Hoist OptionsUse this section to offer hoist options. Number these options starting with 5.1,5.2, etc., until you have listed all hoist options.

5.1 ___________________________________ $5.2 ___________________________________ $

Installation of dump body and/or hoist as well as options -complete install cost See attached sheets

Price of FMVSS 108 lighting package Included

Installation of FMVSS 108 lighting package- complete install cost Included

Price of ICC bumper under ride protection $96.56

Installation of ICC bumper under ride protection- complete install cost $105.05

5.3 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Special Terms and ConditionsDEDUCT cost per Used Hour from the original Contract Price. $

5.4 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 10% (See Special Terms and Conditions)

5.5 DELIVERY STARTING POINT - CITY, STATE, ZIP CODE: Lake Crystal, MN 56055PRICE PER LOADED MILE: $2.25

Shop Rate for Mechanical Work $69.00Body Shop Rate $69.00

mailto:[email protected]

http://www.crysteeltruck.com/


State of Minnesota Pricing Page

5.0

Make Crysteel E-Series Mild Steel LC00065066Ford and Chev Application 40" front, 60" cab to Axle9' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 7 gauge A1011 Floor12 gauge sides and 10 gauge frontPainted one fleet color (no base coat/clear coat)Under coated included

5,058.50$

Warranty 1year

Date & I.D. of Price sheet N/A

Discount, if any, to be applied to price sheet N/A

Crysteel hoist LB500 1,417.24$

Crysteel Elecric / Hydraulic Double acting 506.91$ Power unit w/ in cab controls and cover over soleniod valve

Installation of dump body 658.29$

Installation of hoist 490.25$

Installation of hydraulic power unit 242.78$ mounted outside of frame rails driver side w/ control wired in cab

Crysteel Hy-Flo Twin Electric Power Unit-Faster Cycle Time PN 900-1729874 1,952.38$

For quick install 25.12$

Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$

Dump Body

Price



Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Deduct for Chev narrow body (68.37)$ Base coat / clear coat for paint 439.03$ For 8' body ILO 9' deduct (133.26)$ For 3/16" AR450 floor 515.64$ For 1/4" AR450 Floor 659.33$ For LED STT 257.50$ For 10 gauge side ILO 12 gauge 54.46$ For 7 gauge sides ILO 12 gauge 107.76$ For 7 gauge front and tailgate 179.61$ For delete tailgate & tailgate hardware (173.81)$ For boxed top rails 179.61$ Add for 52" bulkhead 121.67$ Add for Ovals in front posts facing rear 60.26$ Add for straight bulkhead ILO tapered 119.35$ Add for 9" longsills ILO standard 119.35$ Add for I-Beam long sills ILO standard 60.26$ Add for manual Tarp Mesh style 1645714 535.84$ For 6" poly side boards installed 298.43$ Deduct for fixed sides (456.55)$ LED Marker Lights 63.73$ Sliding Patch Gate (must have 20" high tailgate to fit patch gate) 260.72$ Install light boxes supplier furnished 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included

Delivery Starting point Fridley, MN

Price per loaded mile for delivery $.2.25



5.0 Dump Body

Make Crysteel E-Series Stainless Steel LC00065067Ford and Chev Application 40" front, 60" cab to AxleAll 201 Stainless Steel Construction9' long x 93" wide OD x 84" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 3/16 AR450 Floor12 gauge 201 SS Sides, 10 gauge SS Front & RearStainless steel finish-no paint included

Price 6,803.99$

Warranty 1year













Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Deduct for Chev narrow body (135.26)$ Add for painting stainless steel body non-base coat paint color 1,361.85$ Base coat / clear coat for paint 442.98$ For LED STT 261.36$ For 10 SS gauge side ILO 12 gauge SS 127.02$ For 7 gauge SS sides ILO 12 gauge SS 190.53$ For 7 gauge SS front and tailgate ILO 10 gauge SS 335.20$ For 7 gauge SS floor ILO 3/16" AR450 floor 463.51$ Deduct for 7 gauge A1011 floor ILO 3/16" AR450 floor (515.99)$ Add for .190 aluminum sides ILO 10gauge SS 1,293.74$ For delete tailgate & tailgate hardware (176.42)$ Deduct for 8'1" body ILO 9' (135.26)$ Add for 96" wide body ILO 93" wide body 138.78$ Add for 52" bulkhead 4500 352.84$ Deduct for fixed sides (476.46)$ LED Marker Lights 64.69$ For 9" long sills ILO Standard 121.14$ For I-Beam Long Sill ILO Standard 242.28$ For Ovals Facing to rear 61.16$ Add for straight bulkhead ILO tapered 121.14$ For 6" Board Poly installed 1645690 332.17$ For manual Tarp Mesh Style 1645714 540.73$ Sliding Patch Gate (must have 20" Tailgate to fit patch gate) 382.24$ Install light boxes supplier furnished 151.72$ Deduct for DA finish ILO wanding (310.37)$ Deduct for Alumna bright ILO wanding (366.94)$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Mild Steel LC00065070Ford & Chev Application 40" front, 84" cab to Axle11' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ window, 7 gauge A1011 Floor10 gauge front, rear & 12 gauge sidesPainted one fleet color (no base coat/clear coat)Under Coating included

5,555.72$

Warranty 1year











Price



Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Deduct for Chev narrow body (69.39)$ Base coat / clear coat for paint 549.88$ For 3/16" AR450 floor 639.82$ For 1/4" AR450 Floor 785.66$ For LED STT 261.36$ For 10 gauge side ILO 12 gauge 67.04$ For 7 gauge sides ILO 12 gauge 134.08$ For 7 gauge front and tailgate 182.30$ For delete tailgate & tailgate hardware (176.42)$ Add for 52" bulkhead 124.67$ Deduct for fixed sides (463.40)$ LED Marker Lights 64.69$ Boxed top rails 182.30$ For 9" long sills ILO 7" 121.14$ For I Beam long sill ILO standard 242.28$ For Ovals in front post facing rear 61.16$ Add for straight bulkhead ILO tapered 121.14$ For 6" poly side boards 1645691 281.74$ For Manual Tarp Mesh 1645714 540.73$ Sliding Patch Gate (must have 20" Tailgate to fit patch gate) 264.63$ Install light boxes supplier furnished at factory 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set EC CO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Stainless Steel LC00065071Ford and Chev Application 40" front, 84" cab to AxleAll 201 Stainless Steel Construction11' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor12 gauge 201 SS Sides, 10 gauge SS Front & RearUnder coating includedStainless steel finish-no paint included

6,361.70$

Warranty 1year









For quick install Deduct 30.67$

Price



Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab 570.23$ Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Add for painting stainless steel body non-base coat paint color 1,620.32$ Base coat / clear coat for paint 549.88$ For LED STT 261.36$ For 10 SS gauge side ILO 12 gauge SS 154.33$ For 7 gauge SS sides ILO 12 gauge SS 232.87$ For 7 gauge SS front and tailgate ILO 10 gauge SS 317.56$ Add for .190 aluminum sides ILO 10gauge SS 1,411.36$ For delete tailgate & tailgate hardware (176.42)$ Add for 52" bulkhead 4500 352.84$ Deduct for fixed sides (476.46)$ For 3/16" AR450 floor ILO 7 gauge A1011 630.36$ For 1/4" AR450 Floor ILO 7 gague A1011 774.05$ For 7 guage 201 SS floor ILO 7 gauge A1011 1,407.88$ LED Marker Lights 64.69$ For 9" long sills ILO Standard 121.14$ For I-Beam Long Sill ILO Standard 242.28$ For Ovals Facing to rear 61.16$ Add for straight bulkhead ILO tapered 121.14$ For 6" Board Poly installed 1645691 351.77$ For manual Tarp Mesh Style 1645714 540.73$ Sliding Patch Gate (must have 20" Tailgate to fit patch gate) 382.24$ Install light boxes supplier furnished at factory 151.72$ Deduct for DA finish ILO wanding (310.37)$ Deduct for Alumna bright ILO wanding (366.94)$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Mild Steel LC00065068Dodge Application 40" front, 60" cab to Axle9' 6" long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ Tapered Window, 7 gauge A1011 Floor10 gauge front and rear, 12 gague sides A1011Painted one fleet color (no base coat/clear coat)Under coating included

Price 4,987.52$

Warranty 1year













Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Deduct for Chev narrow body (69.39)$ Base coat / clear coat for paint 442.98$ For 3/16" AR450 floor 552.78$ For 1/4" AR450 Floor 698.62$ For LED STT 261.36$ For 10 gauge side ILO 12 gauge 58.81$ For 7 gauge sides ILO 12 gauge 115.26$ For 7 gauge front and tailgate 182.30$ For delete tailgate & tailgate hardware (176.42)$ Add for 52" bulkhead 124.67$ Deduct for fixed sides (463.40)$ LED Marker Lights 64.69$ Boxed top rails 182.30$ For 9" long sills ILO 7" 121.14$ For I Beam long sill ILO standard 242.28$ For Ovals in front post facing rear 61.16$ Add for straight bulkhead ILO tapered 121.14$ For 6" poly side boards 1645691 262.14$ For Manual Tarp Mesh 1645714 540.73$ Sliding Patch Gate (must have 20" Tailgate to fit patch gate) 264.63$ Install light boxes supplier furnished at factory 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Stainless Steel LC00065069Dodge Application 40" front, 60" cab to AxleAll 201 Stainless Steel Construction9' 6"' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 7 gauge A1011 steel Floor12 gauge 201 SS Sides, 10 gauge SS Front & RearPainted one fleet color (no base coat/clear coat)Under coating included

Price 6,131.54$

Warranty 1year

















5.0 Dump Body

Make Crysteel E-Series Mild Steel LC00065072Dodge Application 40" front, 84" cab to Axle11' 6" long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 7 gauge A1011 Floor12 gauge sides and 10 gauge front and 10 gague rearPainted one fleet color (no base coat/clear coat)Under coating included

Price 5,881.46$

Warranty 1year













Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Deduct for Chev narrow body (69.39)$ Base coat / clear coat for paint 549.88$ For 3/16" AR450 floor 669.22$ For 1/4" AR450 Floor 815.06$ For LED STT 261.36$ For 10 gauge side ILO 12 gauge 70.57$ For 7 gauge sides ILO 12 gauge 139.96$ For 7 gauge front and tailgate 182.30$ For delete tailgate & tailgate hardware (176.42)$ Add for 52" bulkhead 124.67$ Deduct for fixed sides (571.60)$ LED Marker Lights 64.69$ Boxed top rails 182.30$ For 9" long sills ILO 7" 121.14$ For I Beam long sill ILO standard 242.28$ For Ovals in front post facing rear 61.16$ Add for straight bulkhead ILO tapered 121.14$ For 6" poly side boards 1645692 317.02$ For Manual Tarp Mesh 1645714 555.10$ Sliding Patch Gate (must have 20" Tailgate to fit patch gate) 264.63$ Install light boxes supplier furnished at factory 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel E-Series Stainless Steel LC00065073Dodge Application 40" front, 84" cab to AxleAll 201 Stainless Steel Construction11' 6"' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ window, 7 guage A1011 steel floor12 gauge 201 SS Sides, 10 gauge SS Front & RearUnder coating includedStainless steel finish-no paint included

Price 6,423.63$

Warranty 1year










Dump Body







5.0 Dump Body

Make Crysteel Deuce-Series Mild Steel LC00054015Ford and Chev Application 38" front, 84" cab to Axle11' long x 96" wide OD x 87" wide ID2 - 3 Yard capacitySide height 12"Tailgate height 18"Quick drop tailgate, passenger fold down sideDriver side and rear dump thru capableFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge front and 12 gauge sidesPainted one fleet color (no base coat/clear coat)Under coating includedIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price 8,803.60$

Warranty 5 years



Crysteel hoist Included

Crysteel Elecric / Hydraulic Double acting IncludedPower unit w/ in cab controls and cover over soleniod valve

Installation of dump body 1,272.29$

Installation of hoist Included

Installation of hydraulic power unit Includedmounted outside of frame rails driver side w/ control wired in cab



Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab 315.26$ Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 325.11$ Base coat / clear coat for paint 434.87$ For 3/16" AR450 floor 507.52$ For 1/4" AR450 Floor 648.94$ For passenger side dump iLO Standard 234.94$ For straight bulkhead, less cab shield, ILO tapered integral cab shield 114.05$ Light boxes in bulkhead installed at factory 142.56$ For LED marker lights 62.73$ For delete tailgate & tailgate hardware (171.07)$ For Extra Ovals front Post facing rear 59.31$ For box top rails 171.07$ For 48" high front ILO 38" 57.02$ For 6" poly boards Installed 1645689 365.97$ For manual tarp (tapered Bulkhead)1645714 670.78$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel Deuce-Series Stainless Steel LC00065080Ford and GM application 40" front, 60" CA9' long x 96" wide OD x 87" wide IDSide height 12"Tailgate height 18"Quick drop tailgate, driver side fold down sideFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge 201 SS front, 12 201 gauge SS sidesStainless steel finish-no paint includedUnder coating includedPassenger side dump thruIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price 9,385.36$

Warranty 5 years









Dump Body



Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Add for painting SS or MS body non-base coat paint color 1,361.85$ Base coat / clear coat for paint 434.87$ For 3/16" AR450 floor 507.52$ For 1/4" AR450 Floor 648.94$ For driver side dump thru ILO passenger side (234.43)$ Light boxes in bulkhead installed at factory 147.12$ For LED marker lights 62.73$ For delete tailgate & tailgate hardware (171.07)$ For Extra Ovals front Post facing rear 59.31$ For 6" poly boards Installed 1645689 365.97$ For manual tarp (tapered Bulkhead)1645714 670.78$ Deduct for DA finish ILO wanding (310.37)$ Deduct for Alumna bright ILO wanding (366.94)$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 Dump Body

Make Crysteel Deuce-Series Mild Steel LC00065082Ford and Chev Application 38" front, 84" cab to Axle11' long x 96" wide OD x 87" wide ID2 - 3 Yard capacitySide height 10"Tailgate height 16"Quick drop tailgate, passenger side fold down sideDriver side and rear dump thru capableFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge front and 12 gauge sidesPainted one fleet color (no base coat/clear coat)Under coating includedIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price 9,321.01$

Warranty 5 years








Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab 560.38$ Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Deduct for deleting painting for SS body non-base coat paint color (1,719.12)$ Base coat / clear coat for paint 434.87$



For 3/16" AR450 floor 602.18$ For 1/4" AR450 Floor 739.04$ For passenger side dump thru ILO driver side 234.94$ For straight bulkhead, less cab shield, ILO tapered integral cab shield 114.05$ Light boxes in bulkhead installed at factory 142.56$ For LED marker lights 60.45$ For delete tailgate & tailgate hardware (171.07)$ For Extra Ovals front Post facing rear 59.31$ For box top rails 171.07$ For 48" high front ILO 38" 57.02$ For 6" poly boards Installed 1645689 415.39$ For manual tarp (tapered Bulkhead)1645714 670.78$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 Dump Body

Make Crysteel Deuce-Series Stainless Steel LC00065081Ford and Chev Application 38" front, 84" cab to Axle11' long x 96" wide OD x 87" wide ID2 - 3 Yard capacitySide height 12"Tailgate height 18"Quick drop tailgate, passenger side fold down sideDriver side and rear dump thru capableFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge 201 SS front and 12 gauge 201 SS sides10 gauge 201 SS rearStainless steel finish-no paint includedUnder coating includedIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price 10,681.08$

Warranty 5 years







Installation of hydraulic power unit Includedmounted outside of frame rails driver



side w/ control wired in cab

Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab 560.38$ Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 570.23$ Add for painting SS body non-base coat paint color 1,766.16$ Base coat / clear coat for paint 434.87$ For 3/16" AR450 floor 602.18$ For 1/4" AR450 Floor 792.64$ Light boxes in bulkhead installed at factory 147.12$ For LED marker lights 62.73$ For delete tailgate & tailgate hardware (171.07)$ For Extra Ovals front Post facing rear 59.31$ For 48" high front ILO 38" 114.05$ For 6" poly boards Installed 1645689 365.97$ For manual tarp (tapered Bulkhead)1645714 670.78$ Deduct for DA finish ILO wanding (310.37)$ Deduct for Alumna bright ILO wanding (366.94)$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel Contractor 9' Mild Steel LC00065074 60" cab to Axle9' long x 96" wide OD Cab shield priced seperatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Oopening on Head board12 gauge sides, 10 gauge front7 gauge floorPainted one fleet color (no base coat/clear coat)Under coating included

SellPrice 6,246.36$

Warranty 5year










Dump Body



Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ For 1/4 tapered integral cab shield shipped loose 623.78$ Base coat / clear coat for paint 439.03$ For 3/16" AR450 floor 515.64$ For 1/4" AR450 Floor 659.33$ For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ For boxed top rails 179.61$ Add for Ovals in front posts facing rear 60.26$ Add for straight bulkhead ILO tapered 119.35$ Add for I-Beam ling sills ILO standard 238.70$ Add for manual Tarp Mesh style 1644930 663.31$ For 6" poly side boards installed 298.43$ Deduct for fixed sides (456.55)$ LED Marker Lights 63.73$ Sliding Patch Gate (must have 20" high tailgate to fit patch gate) 260.72$ Install light boxes supplier furnished at factory 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included


Price per loaded mile for delivery 2.25$



5.0 Dump Body

Make Crysteel Contractor 9' 6" Mild Steel LC00065075 60" cab to Axle9'6" long x 96" wide OD Cab shield priced seperatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Oopening on Head board12 gauge sides, 10 gauge front7 guage floor and tailgatePainted one fleet color (no base coat/clear coat)Under coating included

SellPrice 6,364.97$

Warranty 5year












Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ For 1/4 tapered integral cab shield shipped loose 623.78$ Base coat / clear coat for paint 439.03$ For 3/16" AR450 floor 544.61$ For 1/4" AR450 Floor 688.30$ For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ For boxed top rails 179.61$ Add for Ovals in front posts facing rear 60.26$ Add for I-Beam ling sills ILO standard 238.70$ Add for manual Tarp Mesh style 1644930 663.31$ For 6" poly side boards installed 298.43$ Deduct for fixed sides (456.55)$ LED Marker Lights 63.73$ Sliding Patch Gate (must have 20" high tailgate to fit patch gate) 260.72$ Install light boxes supplier furnished at factory 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel Contractor 11' Mild Steel LC0006507684" cab to Axle11' long x 96" wide OD Cab shield priced seperatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Opening on Head board12 gauge sides, 10 gauge front7 gauge floor and tailgatePainted one fleet color (no base coat/clear coat)Under coating included

SellPrice 6,969.42$

Warranty 5year












Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ For 1/4 tapered integral cab shield shipped loose 623.78$ Base coat / clear coat for paint 544.86$ For 3/16" AR450 floor 544.61$ For 1/4" AR450 Floor 688.30$ For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ For boxed top rails 179.61$ Add for Ovals in front posts facing rear 60.26$ Add for I-Beam ling sills ILO standard 238.70$ Add for manual Tarp Mesh style 1644930 663.31$ For 6" poly side boards installed 298.43$ Deduct for fixed sides (456.55)$ LED Marker Lights 63.73$ Sliding Patch Gate (must have 20" high tailgate to fit patch gate) 260.72$ Install light boxes supplier furnished at factory 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set Ecco 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel Contractor 11' 6" Mild Steel LC0006507784" cab to Axle11 6"' long x 96" wide OD Cab shield priced seperatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Oopening on Head board12 gauge sides, 10 gauge front7 guage floor and tailgatePainted one fleet color (no base coat/clear coat)Under coating included

SellPrice 7,088.03$

Warranty 5year












Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ For 1/4 tapered integral cab shield shipped loose 623.78$ Base coat / clear coat for paint 544.86$ For 3/16" AR450 floor 544.61$ For 1/4" AR450 Floor 688.30$ For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ For boxed top rails 179.61$ Add for Ovals in front posts facing rear 60.26$ Add for I-Beam ling sills ILO standard 238.70$ Add for manual Tarp Mesh style 1644930 663.31$ For 6" poly side boards installed 298.43$ Deduct for fixed sides (456.55)$ LED Marker Lights 63.73$ Sliding Patch Gate (must have 20" high tailgate to fit patch gate) 260.72$ Install light boxes supplier furnished at factory 149.48$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included



Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:Website:

5.0

5.15.2

5.3

5.4

5.5

763-571-1902800-795-1280763-571-5091jwyatt@crysteeltruck.comwww.crysteeltruck.com

DUMP BODYMake J-Craft

Warranty 2 years



Hoist OptionsUse this section to offer hoist options. Number these options starting with 5.1,5.2, etc., until you have listed all hoist options.___________________________________ $___________________________________ $

Installation of dump body and/or hoist as well as options -complete install cost $1,050.53





VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Special Terms and ConditionsDEDUCT cost per Used Hour from the original Contract Price. $

DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 10% (See Special Terms and Conditions)

Shop Rate For Mechanical $69.00 per hourBody Shop Rate $69.00 per hour

DELIVERY STARTING POINT - CITY, STATE, ZIP CODE: Lake Crystal, MN 56055PRICE PER LOADED MILE: $2.25

Crysteel Truck EquipmentJim Wyatt1130 73rd Ave NE

Fridley, MN 55432





5.0

Make J-Craft Magna Series Steel LC00065092Ford and Chev Application 40" front, 60" cab to Axle9' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 3/16" AR400 Floor12 gauge sides, 10 gauge front & tailgate7" Western C-Channel longsillsPainted one fleet color (no base coat/clear coat)Under coated included

6,688.62$

Warranty 1year







Installation of hydraulic power unit 242.78$ mounted outside of frame rails driver

Dump Body

Price





Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Base coat / clear coat for paint 439.03$ For body with stainless steel sides and ends ILO carbon steel 2,638.09$ For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ Add for Ovals in front posts facing rear 64.38$ Add for manual Tarp Mesh style 1645714 535.84$ For 6" poly side boards installed 339.63$ LED Marker Lights 63.73$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 6" Oval Light Boxes fitted for E-Series Bulkhead PN 00001 274.93$ Add for 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 274.93$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make J-Craft Magna Series Steel LC00065094Ford and Chev Application 40" front, 60" cab to Axle9.5' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 3/16" AR400 Floor12 gauge sides, 10 gauge front & tailgate7" Western C-Channel longsillsPainted one fleet color (no base coat/clear coat)Under coated included

6,827.40$

Warranty 1year








Dump Body

Price










5.0

Make J-Craft Magna Series Steel LC00065093Ford and Chev Application 40" front, 84" cab to Axle11' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 3/16" AR400 Floor12 gauge sides, 10 gauge front & tailgate7" Western C-Channel longsillsPainted one fleet color (no base coat/clear coat)Under coated included

7,426.95$

Warranty 1year








Dump Body

Price










5.0

Make J-Craft Magna Series Steel LC00054097Ford and Chev Application 40" front, 84" cab to Axle11.5' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 3/16" AR400 Floor12 gauge sides, 10 gauge front & tailgate7" Western C-Channel longsillsPainted one fleet color (no base coat/clear coat)Under coated included

7,565.73$

Warranty 1year








Dump Body

Price








Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

5.0 DUMP BODYMake Tafco

Warranty 5 years




5.1 ___________________________________ $5.2 ___________________________________ $








Shop Rate For Mechanical $69.00 per hourBody Shop Rate $69.00 per hour

5.5 DELIVERY STARTING POINT - CITY, STATE, ZIP CODE: Blue Earth, MN 56013PRICE PER LOADED MILE: $2.25


Fridley, MN 55432





5.0 Dump Body

Make Tafco Aluminum Dump Body w/ Aluminum floor 141-238 42" front, 60" cab to Axle9' 8" long x 96" wide OD Side height 12" - 3/16" Aluminum Tailgate height 23" - 3/16" AluminumQuick drop tailgate, rigid sidesNo Cross members6" Aluminum Long sills1 1/4" Aluminum plank floorFMVSS 108 lights42" Tapered Bulk head w/ windowAluminum finish-no paint

Price 5,497.13$

Warranty 1 year






Installation of hoist with steel longsills added 898.34$



Add for Cab Shield 12' PN 141-085 255.35$ Add for 11'4" ILO 9'8" PN 141-239 504.96$



Tarp Kit 139-088 982.22$ Paint aluminum body one standard color non-base coat 1,626.93$ Add for LB510 hoist for a 11'4" body 173.37$ Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Base coat / clear coat for paint 439.03$ For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ For 6" poly side boards installed 339.63$ LED Marker Lights 63.73$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Tafco Lite Aluminum Contractor Body w/ Aluminum floorPN 1142-570 40" front, 60" cab to Axle9' long x 94" wide OD x 90" wide IDSide height 16"Tailgate height 16"Quick drop tailgate, Fold down sidesFold Down Side StopsDirt shedding top rail and corner post6" Aluminum Long sills3" I-Beam 16" on center Aluminum cross menbersFMVSS 108 lights40" Tapered Bulk head w/ windowAluminum finish-no paint

Price 4,187.40$

Warranty 1 year






Installation of hoist with steel longsills 898.34$



Add for 12' ILO 9' 833.46$



Add for 10' ILO 9' 229.53$ Add for 94" skirt 180.75$ Paint aluminum body one standard color non-base coat 1,628.33$ Add for LB510 hoist for a 12' body 173.37$ Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Base coat / clear coat for paint 439.03$ For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ For 6" poly side boards installed 339.63$ LED Marker Lights 63.73$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 Dump Body

Make Tafco Magnum Aluminum Contractor Body w/ Aluminum floorPN 139-06942" Std. tapered bulkhead w/punched window, 60" cab to Axle9' long x 94" wide OD x 90" wide IDSide height 14"Tailgate height 23"Quick drop tailgate, Fold down sidesFold Down Side StopsDirt shedding top rail and corner post6" Aluminum Long sills3" I-Beam 12" on center Aluminum cross menbersFMVSS 108 lights1-1/4" aluminum extruded floor with a 6.85" aluminum extruded side railsAluminum finish-no paint

Price 6,562.99$

Warranty 5 years






Installation of hoist with steel longsills 898.34$



Add for 10' PN 140-218 ILO 9' 183.62$ Add for 11' PN 139-078 ILO 9' 550.86$ Add for 12' PN 140-211 ILO 9' 978.35$ Add for bulkhead stop light kit PN 139-077 185.39$ Add for 12" cab shield PN 141-085 395.42$

Paint aluminum body one standard color non-base coat 1,645.84$ Add for LB510 hoist for a 11' or 12' body 173.37$ Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Base coat / clear coat for paint 439.03$

For LED STT 257.50$ For delete tailgate & tailgate hardware (173.81)$ Add for manual Tarp Me esh tarp PN 141-085 808.79$ For 6" poly side boards installed 339.63$ LED Marker Lights 63.73$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 DUMP BODYMake Buyers Dumper Dogg

Warranty years




5.1 ___________________________________ $5.2 ___________________________________ $

Installation of dump body and/or hoist as well as options -complete install cost $227.50







Shop Rate For Mechanical $69.00 per hourBody Shop Rate $6900 per hour

5.5 DELIVERY STARTING POINT - CITY, STATE, ZIP CODE: Mentro, Ohio 44060PRICE PER LOADED MILE: $2.25


Fridley, MN 55432





5.0

Make Dumper Dogg Dump Inserts (5531000)8' long Steel ConstructionPower up and down12 gauge steel powder coated blackTethered control box 9' cordGrease fittings20' battery cablesTailagate chains3/4" diameter tailgate hinge pins6" Aluminum Long sillsbody-up indaictor (kit SK10)Dump angle 0 - 45 dregreePayload capacity 6000 lbs

Price 3,222.68$

Warranty 1 years



Add for 6' Mild Steel P/N 5531006 Same PriceAdd for 8' Stainless Steel P/N 5534000 927.96$ Add for 6' Stainless Steel P/N 5534006 927.96$ Add for Bolt-on mild steel cab Guards for 6' & 8' Steel 507.37$ Add for Bolt-on stainless steel cab Guards for 6' & 8' Steel 662.03$ Add for mild steel wall extension bracket kit for 6' &8' steel insert 411.89$ (hardware and 2 brackets per side) accepts one 2" x 12" per side Part number 5531020Add for stainless steel wall extension bracket kit for 6' &8' steel insert 446.85$ (hardware and 2 brackets per side) accepts one 2" x 12" per side Part number 5534020Add for Stainless Steel Tailgate Sander 3,605.97$



Dump Body





5.0

Make Dumper Dogg Dump Inserts (5532000)8' long Poly ConstructionPower up and down12 gauge steel powder coated blackTethered control box 9' cordGrease fittings20' battery cablesTailagate chains3/4" diameter tailgate hinge pinsbody-up indaictor (kit SK10)Dump angle 0 - 45 dregreePayload capacity 6000 lbs

Price 3,874.94$

Warranty 1 years



Add for Wall extension bracket kit for 8' 707.76$ For Poly insert P/N 5531050Add for bracket kit for side wall extensions 411.89$ Add for Stainless Steel Tailgate Sander 3,605.97$



Dump Body




5.0 DUMP BODYMake Crysteel E-Series Aluminum

Warranty 5 years




5.1 ___________________________________ $5.2 ___________________________________ $








Shop Rate for Mechanical $69.00 per hourBody Shop Rate $69.00 per hour

5.5 DELIVERY STARTING POINT - CITY, STATE, ZIP CODE: Lake Crystal MNPRICE PER LOADED MILE: $2.25


Fridley, MN 55432





5.0

Make Crysteel E-Series Aluminum LC00065078Ford 40" front, 60" cab to Axle9'4" long x 96" wide OD x 87" wide IDSide height 16"Tailgate height 22"Rigid sides w/single panel reverse bindCrossmemberless understructureDirt shedding top rail and corner post8" lonsills, 3/16" 6061-T6 aluminum floor1/4 cab shield w/ front V-braceManual tailgate releaseAluminum finish-no paint included

Price 6,272.70$

Warranty 1year






Installation of hoist w/steel longsills 897.11$



For folding sides ILO rigid sides 809.75$

Add for painting stainless steel body non-base coat paint color 1,676.50$

Dump Body



Base coat / clear coat for paint 442.98$ Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel E-Series Aluminum LC00065079Ford 40" front, 84" cab to Axle11'4" long x 96" wide OD x 87" wide IDSide height 16"Tailgate height 22"Rigid sides w/single panel reverse bindCrossmemberless understructureDirt shedding top rail and corner post8" lonsills, 3/16" 6061-T6 aluminum floor1/4 cab shield w/ front V-braceManual tailgate releaseAluminum finish-no paint included

Price 7,128.07$

Warranty 1year









For folding sides ILO rigid sides 809.75$ Add for painting stainless steel body non-base coat paint color 1,917.46$ Base coat / clear coat for paint 549.88$

Dump Body



Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 646.69$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 DUMP BODYMake Future Line Aluminum

1 yearWarranty

Date & I.D. of Price List0%

Discount to be applied to Price List

Hoist OptionsUse this section to offer hoist options. Number these options starting with 5.1,5.2, etc., until you have listed all hoist options. $

5.1 ___________________________________ $5.2 ___________________________________

$1,117.00Installation of dump body and/or hoist as well as options -complete install cost

IncludedPrice of FMVSS 108 lighting package

IncludedInstallation of FMVSS 108 lighting package- complete install cost

$125.14Price of ICC bumper under ride protection

$105.05Installation of ICC bumper under ride protection- complete install cost

5.3 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Special Terms and Conditions $DEDUCT cost per Used Hour from the original Contract Price.

10%5.4 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES

(See Special Terms and Conditions)$69.00 per hour

Shop Rate for Mechanical $69.00 per hourBody Shop Rate

Lake Crystal MN5.5 DELIVERY STARTING POINT - CITY, STATE, ZIP CODE: $2.25

PRICE PER LOADED MILE:


Fridley, MN 55432





5.0

Make Aluminum Contractor AMM85805168.5' long x 80" wideLED lights, rubber grommets and sealed wire harness3/16" 5052 H34 Aluminum floors, inside sides, rear post and bulkhead1/8" 5052 H34 Aluminum floors, inside tailgate5" long sills .190 Extruded aluminum channel 6061-T6 material4" Cross sills .160 extruded aluminum channel 6061-T6 on 16" centerLED lighting FMVSS108Double panel sides and tailgate with quick releaseDouble Acting taailgate16" sides and tailgate12' body only no side door on 9' bodiesAluminum finish-no paint included

Price 5,369.46$

Warranty 1year









For 9'4" x 96" ILO St st AMM0996616 Add 1,787.25$ For 11'4" x 96" ILO S Std AMM1196616 Add 3,409.70$

Dump Body



For 12'4 x 96" ILO S Std AMM1196616 Add 3,808.50$ 1/4" Cab Shield 12" x 90" 956.14$ Cab Shield weld on CSW1000 438.20$ Coal chute installed ACC1000 570.94$ Paint aluminum body one standard color non-base coat 1,645.84$ Add for LB510 hoist for a 11'4" or 12'4" body 173.37$ Con Slip Liner Application-Per foot Floor only 185.00$ Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Base coat / clear coat for paint 439.03$ For delete tailgate & tailgate hardware (173.81)$ Add for Ovals in front posts facing rear 126.18$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make AluminumDump Body 3 -4 yard ARMM85803168.5' long x 80" wideLED lights, rubber grommets and sealed wire harness3/16" 5052 H34 Aluminum floors, inside sides, rear post and bulkhead1/8" 5052 H34 Aluminum floors, inside tailgate5" long sills .190 Extruded aluminum channel 6061-T6 material4" Cross sills .160 extruded aluminum channel 6061-T6 on 16" centerLED lighting FMVSS108Double panel sides and tailgate Double Acting tailgate16" sides and tailgateAluminum finish-no paint included

Price 4,952.01$

Warranty 1year









For 9'4" x 96" ILO St td ARM0996616 Add 1,785.81$ For 11'4" x 96" ILO S Std ARM1196616 Add 3,409.70$ For 12'4 x 96" ILO S Std ARM1196616 Add 3,808.50$

Dump Body



1/4" cab shield 12" x 90" ACS1290 956.14$ Cab Shield weld on CSW1000 438.20$ Coal chute installed ACC1000 570.94$ Paint aluminum body one standard color non-base coat 1,645.84$ Add for LB510 hoist for a 11'4" or 12'4" body 173.37$ Con Slip Liner Application-Per foot Floor only 185.00$ Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab 565.43$ Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab 565.43$ Base coat / clear coat for paint 439.03$ For delete tailgate & tailgate hardware (173.81)$ Add for Ovals in front posts facing rear 126.18$ For 6" poly side boards installed 298.43$ Con Slip Liner Application-Per foot Floor only 185.00$ Pull Plate Protection Spray ILO Paint 217.32$ Add for 560-CP510 Back up Alarm 66.86$ Add for R10HDPA Whelen Mini Light bar With self leveling bracket 1,051.86$ Branch guard for R10HDPA Light Bar 266.44$ Add for Whelen L31HAF Super Led 541.63$ Add for 605-STL-72RB LED STT 180.39$ Add for LED 6" Oval 605-6AKIT1 88.45$ Add for 6" Oval Lite Box Enclosed Type PN 605-LB383 162.83$ Add for 1 set ECCO 3510A Surface Mt Strobes 210.86$ Add for Poly Fenders 19.5 985-1901 523.48$ Add for 1 Buyers 1492115 4.6" round LED flood light installed 206.46$ Add for 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch 431.81$ Add for 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch 410.76$ Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch 1,907.80$ Add for Warren 15K Winch w/push bumper kit-installed 5,048.61$ For ICC Bumper 96.56$ For installation of ICC Bumper 105.05$ For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included



Documents

Crysteel Truck Equipment Jim Wyatt 1130 73rd Ave NE ... · Add for 1 Buyers 1492115 4.6" round LED flood light installed $ 206.46 Add for 1 ECCO 5580A Mini Light Bar installed on