Vendor Name: Crysteel Truck Equipment Contact Person: Jim ...5) Truck... · Version of Excel used: Microsoft Excel 2010. 6.0. Aerial Units. ... DICA composite outrigger pads (replaces

Vendor Name: Crysteel Truck EquipmentContact Person: Jim WyattStreet Address: 1130 73rd Ave. NEP.O. Box:

City, State, Zip Fridley, MN 55432Phone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

Version of Excel used: Microsoft Excel 2010

6.0 Aerial UnitsMake ArmLift

Warranty 1 YearDate & I.D. of Price List 9/5/2017

Discount to be applied to Price List* (see note below) 0%

OptionsUse this section to offer options. Add lines as needed

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWED

Delivery Starting Point Address Armstrong, IA 50514Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO

Shop RatesShop Rate for Mechanical work $75.00Body Shop Rate $75.00

*Note: The "Discount to be Applied to Price List" must be a numeric percentage. Not listing a numeric percentage may result in your bid being rejected.

mailto:[email protected]

http://www.crysteeltruck.com/

Vendor Name: Crysteel Truck EquipmentContact Person: Jim WyattStreet Address: 1130 - 73rd Avenue N.E.P.O. Box:City, State, Zip Fridley, MN 55432Phone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

State of Minnesota Pricing Page

6.0 Aerial Lift Unit

Make Patriot AP 20-2 PM H/L Side Hung BucketWalk through aluminum bucket with door and witch podAll steel booms with telescoping upper boom23' working height and 11'6" side reach300 pound bucket capacityTwo speed hydraulic operationsHydraulic bucket leveling12 Volt DC Heavy Duty Pump MotorMotor is continuous duty with 2 to 2.5 GPM flow rate12 Volt Deep Cycle Battery supplies power to the electric pump and motor40 Amp automotive battery chargerDischarge meter for batteryOutrigger pads providedQuick mount frame assembly for Patriot LiftElectric jacks for side mount outriggersManual emergency bleed down at the bucketSafety harness and shock lanyardFull controls at bucket and base with base over rideUpper controls located in bucket for safe operationPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop Completely enclosed in oil bath, maintenance and adjustment freeCounter balance valve on all cylinders prevents creep & locks cylinders in theevent of hydraulic line failureTwo (2) Operator's and Service ManualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsSee Specifications Sheet for more detailsGator or Toro mount unitsInstallation Included

Price $22,397.31

Warranty 1year



Date & I.D. of Price sheet N/A

Discount, if any, to be applied to price sheet N/A

Galvanized steel wheel chocks with cleats (set of 2) $118.56

Options Quoted InstalledRubber wheel chocks with handle(set of two) $97.25

Wheel chock holder $154.53

Two turret mounted 651 strobe lights(one on each side) $534.21

Switch for strobe lights $106.58

DICA composite outrigger pads (replaces std. 12" x 12" CCA $119.90treated wood)

ArmLift trailer, 7000 GVW, 21' L x 8' W, HD tandem axle, surge brakes, $10,195.23(4) manual outriggers(10'6" span), safety chain, DOT lighting, accommodates 2-5/16" ball, 22" deck height

Electric brakes ILO surge brakes N/C

Actuator $331.71

Battery for auxiliary engine with battery cables $377.01

Gas tank for auxiliary engine, includes gauge $532.88

Isolator kit for DC units 020118 $504.90

12 volt battery separator-80315 $303.74

#927 deep cycle battery-80320 $222.48

Battery condition meter-200008 $117.23

Delivery Starting point Fridley, MN

Price per loaded mile for delivery $2.75



6.0 Aerial Lift Units

Make Patriot Truck Mounted Aerial Lift Device Model AFP 20-3A PM H/LAll steel 53lwdopintHeavy duty DC powerPainted bright white with safety scotch lite yellow stripeArmlift X-treme enamel paint process-6 mil primer & finish coatThe following are standard features of the Patriot AFP 20-3 PM H/LSide hung bucketEnclosed fiberglass bucketDi-electric tested to 46KV26' working height and 14'6" side reachTwo speed hydraulic operationsHydraulic bucket leveling12 Volt DC heavy duty pump motorMotor is continuous duty with 2 to 2.5 GPM flow rate12 Volt deep cycle battery supplies power to the electric pump and motor40 amp automotive battery chargerDischarge meter for batteryManual emergency bleed down at the bucketSafety harness and shock lanyardFull controls at bucket and base with base over rideUpper controls located in bucket720 degree non-continuous rotation with stopCounter balance valve on all cylinders prevents creep & locks cylinders if line failure occursTow operator's and service manualsUnit meets or exceeds all OSHA and ansi 92.2 requirementsService body, flatbed style aerial liftNot installed

Price $23,679.63

Warranty 1year

Date & I.D. of Price sheet N/A

Discount, if any, to be applied to price sheet N/A



Installation of aerial lift, service body or flatbed, tail shelf $7,327.03

Options Quoted InstalledCut hole in service body or flatbed for aerial lift install $666.09

Steel tail shelf with ICC rear end protection, lighting, towing $2,048.90

Battery box $215.81

Access step to bucket, drip step w/grip strut step, grab handle $396.99

ArmLift trailer, 7000 GVW, 21' L x 8' W, HD tandem axle, surge brakes, $10,195.23(4) manual outriggers(10'6" span), safety chain, DOT lighting, accommodates 2-5/16" ball, 22" deck height

Electric brakes ILO surge brakes N/C

Actuator $331.71

Battery for auxiliary engine with battery cables $377.01

Gas tank for auxiliary engine, includes gauge $532.88

Isolator kit for DC units 020118 $504.90

12 volt battery separator-80315 $303.74

#927 deep cycle battery-80320 $222.48

Battery condition meter-200008 $117.23





6.0 AERIAL LIFT UNITS

Make Armlift Telescoping fan belt, PTO or auxiliary engine operatedThe following are standard features on A-TEL FB/PTO UnitsSide hung bucketEngine start/stop at bucket and baseTwo speed hydraulic operationGravity leveled systemFiberglass bucket with door300 pound bucket capacity 19" x 7" x 5" deep tool trayInsulated units are enclosed fiberglass buckets125 volt receptacle at bucket with GFI. Inverter or generator required(Not available on insulated models)All wiring and hydraulics secured inside boom in stainless steel cat trackAll mechanical and hydraulic components enclosed inside pedestalSafety harness and shock lanyardSafety anchor ring mounted on upper boomFull controls at bucket and base with base over rideUpper controls located in bucket for safe operationPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model

Steel Booms Not Insulated ModelsA-TEL 29 $16,324.6329' working height, 24' platform height, 17' side reach, 46" base



A-TEL 33 $16,812.2133' working height, 28' platform height, 21' side reach, 46" base


Insulated Models Di-electric test required after installationAF-TEL 33 $19,380.6633' working height, 28' platform height, 21' side reach, 46" base

AF-TEL 34 $19,700.3934' working height, 29' platform height, 21' side reach, 60" base

Di-electric test after installation of insulated unit $659.43


Cut hole in service body or flatbed for aerial lift install $666.09

Options available for steel A-TEL, FB, PTO UnitsSteel tail shelf with ICC rear end protection, lighting, towing $2,048.90


Double step with storage for bucket entry on 60" base-101248 $333.05

101248-I aluminum $407.65

Hydraulic bucket leveling $1,939.67

Manual emergency bleed down valve at bucket-101719S(100667F) $419.64

12 volt emergence backup at bucket and base $815.30

PTO, pump, and adapter with electric shift, indicator light and switch $3,130.64for an automatic transmission or clutch pump fan belt hydraulics

Hose package for pump kit, pto or fan belt $515.56

Level ride under frame torsion bar-under 18,000 GVW $1,152.34

Will require four additional u-bolts per bar priced each $197.16

Vinyl bucket cover-60263S (60260F) $149.21

Hydraulic tool circuit-04041S (040038F) $642.11

36' remote base controls with all functions (steel units only) $432.96

3-1/2" lift cylinder for 350# bucket capacity $704.73

Boom tie down strap with lift order-60254 $122.56

12" base extension-101442 $479.59

"H" frame outriggers w/lockout and hose package $4,662.66






Make Armlift Telescoping DC M340 Intermittent DutyThe following are standard features on the DC M340 Intermittent Duty UnitsSide hung bucketTwo speed hydraulic operationGravity leveled systemFiberglass bucket with door300 pound bucket capacity 19" x 7" x 5" deep tool trayInsulated units are enclosed fiberglass buckets125 volt receptacle at bucket with GFI. Inverter or generator required(Not available on insulated models)All wiring and hydraulics secured inside boom in stainless steel cat trackAll mechanical and hydraulic components enclosed inside pedestalSafety harness and shock lanyardSafety anchor ring mounted on upper boomFull controls at bucket and base with base over rideUpper controls located in bucket for safe operationPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model


A-TEL 33 $17,538.25



33' working height, 28' platform height, 21' side reach, 46" base










101248-I aluminum $407.65










12" base extension-101442 $479.59






Make Armlift Telescoping fan belt, PTO or auxiliary engine operatedThe following are standard features on A-TEL FB/PTO End Hung Bucket UnitsEnd hung bucketNot available in insulated unitsEngine start/stop at bucket and baseTwo speed hydraulic operationHydraulic bucket leveling systemFiberglass walk through bucket with door and switch pod in bucketThree pocket tool pouch for door300 pound bucket capacity Fiberglass tool tray is an optional item125 volt receptacle at bucket with GFI. Inverter or generator required(Not available on insulated models)All wiring and hydraulics secured inside boom in stainless steel cat trackAll mechanical and hydraulic components enclosed inside pedestalSafety harness and shock lanyardSafety anchor ring mounted on upper boomFull controls at bucket and base with base over rideUpper controls located in bucket for safe operationPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel models listed belowWorking height listed for each model

Steel Booms Not Insulated ModelsAE-TEL 29 $18,981.0130.5' working height, 25.5' platform height, 19' side reach, 46" base



A-TEL 33 $19,495.2334.5' working height, 29.5' platform height, 23' side reach, 46" base

A-TEL 34 $19,830.9435.5' working height, 30.5' platform height, 23' side reach, 60" base






101248-I aluminum $407.65













12" base extension-101442 $479.59







Make Armlift Knuckle Boom fan belt or PTO operatedThe following are standard features on A 36, A 38, AF 36, AF 38 FB/PTO UnitsSide hung bucketEngine start/stop at bucket and baseTwo speed hydraulic operationMechanical bucket leveling system by a parallel system of steel rods & HD chainFiberglass bucket with access opening300 pound bucket capacity 19" x 7" x 5" deep tool trayInsulated units are enclosed fiberglass buckets125 volt receptacle at bucket with GFI. Inverter or generator required(Not available on insulated models)Safety harness and shock lanyardSafety anchor ring mounted on upper boomFull controls at bucket and base with base over rideUpper controls located in bucket for safe operationPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model

Steel Booms Not Insulated ModelsA 36 FB/PTO $18,360.2136' working height, 31' platform height, 19' side reach, 36" base

A 38 FB/PTO $18,786.5138' working height, 33' platform height, 20' side reach, 36" base



Insulated Models Di-electric test required after installationAF 36 FB/PTO $21,497.5136' working height, 31' platform height, 19' side reach, 36" base

AF 38 FB/PTO $21,923.8138' working height, 33' platform height, 20' side reach, 36" base

NOTE: HD torsion bar or outriggers required. Specify truck model and yearPower source not included in above pricing







101248-I aluminum $407.65













12" base extension-101442 $479.59







Make Armlift Knuckle Boom full hydraulic operatedThe following are standard features on A 36H, A 38H, AF 36H, AF 38H UnitsSide hung bucketEngine start/stop at bucket and baseMechanical bucket leveling system by a parallel system of steel rods & HD chainFiberglass bucket with access opening300 pound bucket capacity 19" x 7" x 5" deep tool tray125 volt receptacle at bucket with GFI. Inverter or generator required(Not available on insulated models)Safety harness and shock lanyardSafety anchor ring mounted on upper boomFull feathering valves at bucket and base with base over rideUpper controls located on bucket with fiberglass guardPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model

Steel Booms Not Insulated ModelsA 36 H $19,740.3536' working height, 31' platform height, 19' side reach, 36" base

A 38 H $20,166.6538' working height, 33' platform height, 20' side reach, 36" base

Insulated Models Di-electric test required after installationAF 36 H $21,644.05



36' working height, 31' platform height, 19' side reach, 36" base

AF 38 H $22,071.6838' working height, 33' platform height, 20' side reach, 36" base








101248-I aluminum $407.65













12" base extension-101442 $479.59







Make Armlift Knuckle Boom HD DC operatedThe following are standard features on A 36DCHD, A 38DCHD, AF 36DCHD, AF 38DCHD UnitsSide hung bucket12 Volt DC heavy duty pump/motor. Motor is continuous duty with 2 to 2.5 GPM flow rateEngine off operation for added economyType 904-12 volt deep cycle battery supplies power to operate the electric pump and motorConnected to the vehicle's alternator for recharging, isolator providedTwo speed hydraulic operationMechanical bucket leveling system by a parallel system of steel rods & HD chainFiberglass bucket with access opening300 pound bucket capacity 19" x 7" x 5" deep tool tray125 volt receptacle at bucket with GFI. Inverter or generator required(Not available on insulated models)Safety harness and shock lanyardSafety anchor ring mounted on upper boomFull controls at bucket and base with base over rideUpper controls located in bucket for safe operationPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model

Steel Booms Not Insulated ModelsA 36 DC HD $18,911.7336' working height, 31' platform height, 19' side reach, 36" base



A 38 DC HD $19,338.0338' working height, 33' platform height, 20' side reach, 36" base

Insulated Models Di-electric test required after installationAF 36 DC HD $22,049.0436' working height, 31' platform height, 19' side reach, 36" base

AF 38 DC HD $22,476.6738' working height, 33' platform height, 20' side reach, 36" base








101248-I aluminum $407.65










12" base extension-101442 $479.59






Make Armlift Telescopic Boom full hydraulic operated The following are standard features on THS 36 & THI 36 Units Fan Belt or PTOEnd hung bucketEngine start/stop at bucket and baseHydraulic bucket leveling system 24" x 30" x 42" fiberglass enclosed bucket350 pound bucket capacity Fiberglass tool tray10' extension of fiberglass boom providing isolation gap at a minimum of 24"Units rated to 46 KV. Di-electric test after installationAll wiring and hydraulics secured inside boom in stainless steel cat tracksSafety harness and shock lanyardSafety anchor ring mounted on upper boomFull feathering valves at bucket and base with base over rideSingle stick control at bucketUpper controls located on bucket with fiberglass guardPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model

Steel Booms Not Insulated ModelsTHS 36 $24,403.0136' working height, 31' platform height, 23' side reach, 38" base

Insulated Models Di-electric test required after installationTHI36 $25,375.5136' working height, 31' platform height, 23' side reach, 36" base










101248-I aluminum $407.65













12" base extension-101442 $479.59


For hydraulic bucket rotator $2,611.09





Armlift Telescopic/Articulating Boom full hydraulic operated The following are standard features on TKS & TKI Units Fan Belt or PTOEnd hung bucketEngine start/stop at bucket and baseHydraulic bucket leveling system 24" x 30" x 42" fiberglass walk through bucket with door & switch pod in bucketThree pocket tool pouch for door350 pound bucket capacity Fiberglass tool tray is an optionHydraulic bucket rotator rotates bucket 180 degree around end of boom125 volt receptacle at bucket with GFI. Inverter or generator requiredAll wiring and hydraulics secured inside boom in stainless steel cat tracksAll mechanical and hydraulic components enclosed inside pedestalSafety harness and shock lanyardSafety anchor ring mounted on upper boomFull feathering valves at bucket and base with base over ridePainted bright white with safety scotch lite yellow stripe360 degree continuous shear ball rotationMaintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model

Steel Booms Not Insulated ModelsTKS 44BR $31,171.8744' working height, 39' platform height, 28' side reach, 38" base

TKS 46 $36,476.2646' working height, 41' platform height, 31' side reach, 39" base



Insulated Models Di-electric test required after installationTKI44 BR $34,140.7444' working height, 39' platform height, 28' side reach, 38" base

TKI46 $39,413.4746' working height, 41' platform height, 31' side reach, 39" base

NOTE: HD rear torsion bar and outriggers required 46' models. Specify truck model and yearRear torsion bar only required on 44' models.Power source not included in above pricing







101248-I aluminum $407.65













12" base extension-101442 $479.59







Make Armlift Telescoping Heavy Duty DC PMThe following are standard features on A-TEL & AF TEL UnitsSide hung bucketTwo speed hydraulic operationGravity leveled systemFiberglass bucket with door300 pound bucket capacity 19" x 7" x 5" deep tool trayInsulated units are enclosed fiberglass buckets125 volt receptacle at bucket with GFI. Inverter or generator required(Not available on insulated models)All wiring and hydraulics secured inside boom in stainless steel cat trackAll mechanical and hydraulic components enclosed inside pedestalSafety harness and shock lanyardSafety anchor ring mounted on upper boomFull controls at bucket and base with base over rideUpper controls located in bucket for safe operationPainted bright white with safety scotch lite yellow stripe720 degree non-continuous rotation with stop. Completely enclosed.Maintenance and adjustment freeCounter balance valve on all cylinders Counter balance valves prevent creep and locks cylinders inn the event of hydraulic line failureManual emergency descent valve at baseTwo operator and service manualsUnit meets or exceeds all OSHA and ANSI 92.2 requirementsService body or flatbed mount styleNo installation includedSteel and insulated models listed belowWorking height listed for each model














101248-I aluminum $407.65










12" base extension-101442 $479.59



Documents

Vendor Name: Crysteel Truck Equipment Contact Person: Jim ...5) Truck... · Version of Excel used: Microsoft Excel 2010. 6.0. Aerial Units. ... DICA composite outrigger pads (replaces