Brand Name:

Description:

Maximum Service Temperature 2800F (1540C)(1540C)

172 pcf (2755 kg/m3)

Cold Crushing Strength 4000 psi (27.6 MPa)

Modulus of Rupture 730 psi (5,0 MPa)

Apparent Porosity 26.7 %

Thermal Conductivity or "K" FactorMean Temperature BTU/ft2/Hr/F/in. W/mK

2080F (1138C) 0,85 1.47

Typical Chemical Analysis (%)

RESCO PRODUCTS disclaims any express or implied warranties based on this sheet.

Bulk Density

The properties shown on this data sheet represent typical average results generated using standard ASTM test methods (unless otherwise noted)conducted under controlled conditions (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Propertiesare subject to normal manufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties andspecifications at any time without prior notice.

11/07/12 is the date that this data sheet was published. Check with your RESCO sales representative or RESCO'S website to determine if you havethe most current sheet.

Penn Center West, Building 2 - Suite 430, Pittsburgh, PA, 15276 Phone: 888-283-5505

PRODUCT DATA

CRB 45 FG with its unique fused grain composition exhibits low thermal conductivity,excellent hot strengths and very good resistance to fayalite type slag. Suggestedapplications are safety linings in iron and steel handling applications, AOD and EAF safetylinings where reduced shell temperatures are required.

CRB 45 FG

SiO2 Fe2O3 Al203 Cr203 CaO MgO

21.3 13.4 5.3 14.5 1.0 44.5

Brand Name:

Description:

Hot Modulus of Rupture@ 2192oF (1200oC) 980 psi (6.8 MPa)

Slag Resistance@ 2192oF (1200oC) for 11.5 hours with 22.2 ounces of copper fayalite slag

A Reference Competitive Fused Mag Chrome BrickPenetration Zone (%) 22% of the zone in contact with the slag100% of the zone in contact with the slag

COMPETITIVE FUSED MAG CHROME BRICK CRB 45 FG

Penn Center West, Building 2 - Suite 430, Pittsburgh, PA, 15276 Phone: 888-283-5505

PRODUCT DATA

CRB 45 FG Penetration Zone (%)

CRB 45 FG

Pictures courtesy of CIR Laboratory Ste Therese Quebec www.cirlaboratory.com

CRB 45 FG with its unique fused grain composition exhibits low thermal conductivity,excellent hot strengths and very good resistance to fayalite type slag. Suggestedapplications are safety linings in iron and steel handling applications, AOD and EAF safetylinings where reduced shell temperatures are required.

Penetration Zone(22% of zone incontact with theslag )

Penetration Zone(100% of zone incontact with the slag)