Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
REPOWER REBUILD REPAIRCRANE REBUILDS
Save as much as 50% over buying a new crane• All crane components and structures are inspected and measured against factory
specifications and are refurbished as needed.*
• All rebuilds are completed by Manitowoc Certified Structural Welders and Technicians.
• A full 12 month EnCORE warranty is provided on all Manitowoc parts and a 6 month warranty on all repairs completed under the Hoffman EnCORE Program.*
REfURBISh / REBUILD
Services• Line Boring and Facing
• Non-Destructive Testing (NDT)
• Factory & OEM Reman Component Exchange
• Jobsite Commissioning and Adjustments
Certifications• Manitowoc EnCORE Partner—Full access to all
Manitowoc engineering drawings and specifications
• Manitowoc Certified Structural Welders and Technicians
All modifications are factory preapproved to comply with OSHA regulation 1926.1412A.
*Minimum levels of refurbishment and benchmarks must be met in order to be approved as an EnCORE refurbished crane.
2
Hoffman Equipment has the capabilities to perform these services on most makes and models of mobile cranes.
Manitowoc 888 Repower, Refurbish & Structural Repairs
Cummins 330hP Tier III Engine (4100 & 888)
Manitowoc 4100 Repower & Refurbish After
After
After
3
REPOWER & EMISSIONS Extend the life of your crane
• Factory approved Tier III engines comply with local regulations.
• All replacement engines adhere to OSHA repower modification regulations.
• Available DPF systems comply with jobsite & local regulations.
• Repowered engines are an economical solution for older models.
• Tier III engines can be shipped worldwide.
Hoffman Equipment has the capabilities to perform these services on most makes and models of mobile cranes.
A Typical Active DPf System Includes:• One Button Regeneration
Cycle—Easily activate the regeneration cycle from the operator’s cab.
• Work time between required regeneration cycles is between 8 and 12 hours minimum.
• Only a 30 minute regeneration cycle takes place without the engine running.
• Quick disconnect filter mounting available, allowing filters to be mounted onto removable counterweight.
• Meets all NYC BAT emissions requirements and is California CARB certified.
A Typical Repower Includes:• OSHA complaint engine with
a 2 year or 2,000 mile warranty
• Engine control panel with diagnostics in operator's cab
• Electrical harness and junction box
• Instruments
• Drive lines
• Hydraulic components
• Hoses
• Charge air cooler
• Hoffman Equipment’s mechanical to electric throttle adapter
• Air filter package
• Optional engine mounted air compressor
• Radiator with optional steel piping
• Optional remote filter and oil drains for quick and easy regular service
4
Optional Steel Coolant Piping Optional Remote filter Mounting & Oil Drains
Cummins Control Panel in Operator’s Cab Cummins 330hP Tier III Engine (4100 & 888)
Mechanical to Electrical Throttle Adapter Active DPf System to Reduce Particulate Matter
5
• Hoffman works with Manitowoc’s EnCORE engineers, insurance representatives and crane owners to determine whether damaged components should be repaired or replaced.
• All post accident repairs are performed by Manitowoc Certified Structural Welders and Technicians.
• Hoffman installs only factory approved OEM components. Remanufactured components are used whenever possible.
fACTORy CERTIfIEDPOST ACCIDENT REPAIR
AfTER
GROVE RT600 BENT BOOM REPAIR
BOOM TIP NOSE REPLACEMENT
ROLLOVER ACCIDENT
6
Hoffman Equipment has the capabilities to perform these services on most makes and models of mobile cranes.
Manitowoc EnCORE Partner locations in Piscataway & Williamstown, New Jersey
CAPABILITIES
Tools & Equipment• 15 Ton Overhead Crane
• 100 Ton Yard Crane
• 15 Ton Yard Crane
• Line Boring and Facing
• Hydraulic Presses
• Hydraulic Cylinder Repair
• Calibrated Welders
• Field Service and PM Trucks
• Mutlimillion dollar parts inventory
The Crane Experts• Manitowoc Certified Technicians
• Terex Crane Factory Trained Technicians
• Manitowoc Certified Structural Welders
• Thousands of Hours of Manitowoc Factory Training
• Crane Repair & Rebuild Experienced Technicians and Management
Authorized Distributor for these Crane Manufacturers
AMERICAN®
7
300 South Randolphville RoadPiscataway, NJ 08854Phone: 732-752-3600
2610 South Black Horse PikeWilliamstown, NJ 08094Phone: 856-875-0036
800-4-HOFFMAN (800-446-3362)[email protected]
Manitowoc EnCORE Partner Certified facilitiesREBUILD fACILITIES
North American Manitowoc EnCORE Partner Locations