CR150-3-2 A-F-A-V-HQQV 3x400/690 50 HZ · GRUNDFOS DATA BOOKLET CR150-3-2 A-F-A-V-HQQV 3x400/690 50 HZ Grundfos Pump 95922393 Thank you for your interest in our products Please contact

GRUNDFOS DATA BOOKLET

CR150-3-2 A-F-A-V-HQQV 3x400/690 50 HZ Grundfos Pump 95922393

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttp://www.lenntech.com/grundfos/CRFAM/95922393/CR-150-3-2-A-F-A-V-HQQV.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name: Lenntech BV - lenntech.comCreated by: [email protected]: +31 15 2610900Fax: +31 15 2616289Date: -

Printed from Grundfos CAPS [2013.03.059]

Position Qty. Description1 CR 150-3-2 A-F-A-V-HQQV

Note! Product picture may differ from actual product

Product No.: 95922393

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – allother wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handlingand easy service and access. Power transmission is via a split coupling. Pipework connection is viaDIN flanges.

The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product detailsSteel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electricalfield around the products ensures deposition of paint particles as a thin, well-controlled layer on thesurface. An integral part of the process is a pretreatment. The entire process consists of theseelements:

1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpA long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by meansof two coupling guards. The long coupling makes it possible to replace the shaft seal withoutremoving the motor from the pump.

The motor stool connects the pump head and motor. The pump head has a combined 1/2" primingplug and air vent screw.

1/9

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=95922393&freq=50&lang=ENU



The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type isassembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type issuitable for high-pressure applications. The cartridge construction also protects the pump shaft from possiblewear from a dynamic O-ring between pump shaft and shaft seal.

Primary seal:- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness ofthis material pairing offers good resistance against abrasive particles.Secondary seal material: FKM (fluorocarbon rubber)FKM has excellent resistance to oils and chemicals. Above 90 °C, FKM should only be used inmedia without water.

The shaft seal is retained in the pump head by a cover and screws. It can be replaced withoutremoving the motor.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,and the shape of the blades ensure a high efficiency.

The base is made of cast iron and mounted on a separate cast iron base plate. Both the suction andthe discharge side of the base have two pressure gauge tappings. The pump is secured to thefoundation by four bolts through the base plate. The flanges are fastened to the base by means oflocking rings.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DINstandards. The motor is flange-mounted with free-hole flange (FF).Motor mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).Electrical tolerances comply with IEC 60034.

2/9



Position Qty. DescriptionThe motor efficiency is classified as IE3 in accordance with IEC 60034-30.

The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.

The motor can be connected to a variable speed drive for adjustment of pump performance to anyduty point. Grundfos CUE offers a range of variable speed drives. Please find more information inWin-/WebCAPS.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 363 KLiquid temp: 293 KDensity: 998.2 kg/m³

Technical:Speed for pump data: 2951 rpmRated flow: 150 m³/hRated head: 50.7 mShaft seal: HQQVApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex A

Materials:Pump housing: Cast iron

EN-JS1050Impeller: Stainless steel

DIN W.-Nr. 1.4301AISI 304

Installation:Maximum ambient temperature: 328 KMax pressure at stated temp: 30 bar / 90 °C

30 bar / -20 °CFlange standard: DINPipe connection: DN 125Pressure stage: PN 25/40Flange size for motor: FF350

Electrical data:Motor type: SIEMENSIE Efficiency class: IE3Number of poles: 2Rated power - P2: 30 kWPower (P2) required by pump: 30 kWMains frequency: 50 HzRated voltage: 3 x 380-420D/660-725Y VRated current: 56,0-51,0/32,0-29,5 AStarting current: 660-660 %Cos phi - power factor: 0,9Rated speed: 2955 rpm

3/9



Position Qty. DescriptionEfficiency: IE3 93,3%Motor efficiency at full load: 93,3-93,3 %Motor efficiency at 3/4 load: 93,6-93,6 %Motor efficiency at 1/2 load: 93,4-93,4 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): F

Others:Net weight: 368 kgGross weight: 429 kg

4/9



95922393 CR 150-3-2 50 Hz

H[m]

0

10

20

30

40

50

60

70

80

Q [m³/h]0 20 40 60 80 100 120 140 160 180

eta[%]

0

20

40

60

80

100

CR 150-3-2, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P2[kW]

0

5

10

15

20

25

30

NPSH[m]

0

5

10

15

20

25

30

5/9



H[m]

0

10

20

30

40

50

60

70

80

Q [m³/h]0 50 100 150

eta[%]

0

20

40

60

80

100

CR 150-3-2, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P2[kW]

0

10

20

NPSH[m]

0

5

10

F (D

IN)

PN

25-4

0/D

N 1

25G

1/2

400

344

300

402

611

472

184

x

275

380

180

43

1145

380

270

220

288

x

100

150

G 1

/2

L3L2

L1

+T+T

+T

TO A

MP

LIFI

ER

RE

LAY

IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARECONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLYTHERMISTORS PTC ACCORDING TO DIN 44082

TO A

MP

LIFI

ER

RE

LAY

+T+T

+T

L1L2

L3

Description ValueProduct name: CR 150-3-2 A-F-A-V-HQQVProduct No: 95922393EAN number: 5700838936131

Technical:Speed for pump data: 2951 rpmRated flow: 150 m³/hRated head: 50.7 mHead max: 78.2 mImpellers: 3Impeller reduc.: 2Shaft seal: HQQVApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex APump type: CR 150Stages: 3Pump version: AModel: A

Materials:Pump housing: Cast iron

EN-JS1050Impeller: Stainless steel

DIN W.-Nr. 1.4301AISI 304

Material code: ACode for rubber: V

Installation:Maximum ambient temperature: 328 KMax pressure at stated temp: 30 bar / 90 °C

30 bar / -20 °CFlange standard: DINConnect code: FPipe connection: DN 125Pressure stage: PN 25/40Flange size for motor: FF350

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 363 KLiquid temp: 293 KDensity: 998.2 kg/m³

Electrical data:Motor type: SIEMENSIE Efficiency class: IE3Number of poles: 2Rated power - P2: 30 kWPower (P2) required by pump: 30 kWMains frequency: 50 HzRated voltage: 3 x 380-420D/660-725Y VRated current: 56,0-51,0/32,0-29,5 AStarting current: 660-660 %Cos phi - power factor: 0,9Rated speed: 2955 rpmEfficiency: IE3 93,3%Motor efficiency at full load: 93,3-93,3 %Motor efficiency at 3/4 load: 93,6-93,6 %Motor efficiency at 1/2 load: 93,4-93,4 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): FMotor protec: PTCMotor No: 81U15332

6/9

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=95922393&freq=50&lang=ENU



Description Value

Others:Net weight: 368 kgGross weight: 429 kg

7/9



Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

95922393 CR 150-3-2 50 Hz

F (DIN)PN25-40/DN 125

G 1/2

400

344

300

402

611

472

184 x

275

380

180

43

1145

380

270

220

288 x

100

150

G 1/2

8/9



Note! All units are in [mm] unless others are stated.

95922393 CR 150-3-2 50 Hz

L3L2L1

+T +T+T

TO AMPLIFIERRELAY

IEC

TP

211

THE

RM

ALL

Y P

RO

TEC

TED

WH

EN

TH

E T

HE

RM

ISTO

RS

AR

EC

ON

NE

CTE

D T

O A

MP

LIFI

ER

RE

LAY

FO

R C

ON

TRO

L O

F M

AIN

SU

PP

LYTH

ER

MIS

TOR

S P

TC A

CC

OR

DIN

G T

O D

IN 4

4082

TO AMPLIFIERRELAY

+T +T+T

L1 L2 L3

9/9

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

Documents

CR150-3-2 A-F-A-V-HQQV 3x400/690 50 HZ · GRUNDFOS DATA BOOKLET CR150-3-2 A-F-A-V-HQQV 3x400/690 50 HZ Grundfos Pump 95922393 Thank you for your interest in our products Please contact