CRE15-01 A-A-A-E-HQQE 3x400 50 HZ - Lenntech · Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 96512701

GRUNDFOS DATA BOOKLET

CRE15-01 A-A-A-E-HQQE 3x400 50 HZ Grundfos Pump 96512701

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttp://www.lenntech.com/grundfos/CRE15/96512701/CRE-15-1-A-A-A-E-HQQE.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name: Lenntech BV - lenntech.comCreated by: [email protected]: +31 15 2610900Fax: +31 15 2616289Date: -

Printed from Grundfos CAPS [2013.03.059]

Position Qty. Description1 CRE 15-1 A-A-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96512701

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – allother wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handlingand easy service and access. Power transmission is via a split coupling. Pipework connection is viaoval flanges with internal Rp threads.

The pump is fitted with a 3-phase, fan-cooled asynchronous motor.The motor includes a frequency converter and PI controller in the motor terminal box. This enablescontinuously variable control of the motor speed, which again enables adaptation of theperformance to a given requirement.

Further product detailsAn external sensor can be connected if controlled pump operation based on for example flow,differential pressure or temperature is required.A control panel on the motor terminal box enables setting of required setpoint as well as setting ofpump to "Min." or "Max." operation or to "Stop". The control panel has indicator lights for "Operation"and "Fault".

Communication with the pump is possible by means of the Grundfos GO Remote or the R100remote control (accessories). The remote controls enable further settings as well as reading out of anumber of parameters such as "Actual value", "Speed", "Power input" and total "Powerconsumption".

The product carries the Grundfos Blueflux® label. It represents the best from Grundfos withinenergy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet orexceed legislative requirements such as the EuP IE3 grade.

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electricalfield around the products ensures deposition of paint particles as a thin, well-controlled layer on thesurface. An integral part of the process is a pretreatment. The entire process consists of theseelements:

1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

1/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96512701&freq=50&lang=ENU



Position Qty. Description

PumpA standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motorstool by means of two coupling guards.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pumphead has a combined 1/2" priming plug and air vent screw.

The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This sealtype is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,this seal type is suitable for high-pressure applications. The cartridge construction also protects thepump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.

Primary seal:- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness ofthis material pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,and the shape of the blades ensure a high efficiency.

The base is made of cast iron. The oval flanges are bolted to the base. The discharge side of thebase has a drain plug. The pump is secured to the foundation by four bolts through the base plate.

2/8



Position Qty. Description

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DINstandards. The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).Electrical tolerances comply with IEC 60034.

The motor requires no external motor protection. The motor control unit incorporates protectionagainst slow- and quick-rising temperatures, e.g. constant overload and stalled conditions.

The terminal box holds terminals for these connections:- pump start/stop input (potential-free contact)- remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA- 10 V voltage supply for setpoint potentiometer, Imax = 5 mA- one analog sensor input, 0-10 V, 0(4)-20 mA- 24 V voltage supply for sensor, Imax = 40 mA- one analog output- three digital inputs- one potential-free fault signal relay with changeover contact, reporting "Fault", "Operation" or

"Ready"- RS-485 GENIbus connection.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Technical:Speed for pump data: 2853 rpmRated flow: 17 m³/hRated head: 9.9 mShaft seal: HQQEApprovals on nameplate: CE,TR

Materials:Pump housing: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 10 bar / 120 °C

10 bar / -20 °CFlange standard: OVALPipe connection: Rp 2Flange size for motor: FT100

Electrical data:Motor type: 90SANumber of poles: 2

3/8



Position Qty. DescriptionRated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 380-480 VRated current: 2,60-2,30 ACos phi - power factor: 0,88-0,77Rated speed: 360-3510 rpmEfficiency: IE3 82,7%Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): F

Others:Label: Grundfos BluefluxMinimum efficiency index, MEI ≥: 0.7Net weight: 53 kgGross weight: 57 kg

4/8



96512701 CRE 15-1 50 Hz

H[m]

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Q [m³/h]0 2 4 6 8 10 12 14 16 18 20 22

eta[%]

0

10

20

30

40

50

60

70

80

90

100

CRE 15-1, 3*400 V, 50Hz

100 %

25 %

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0.0

0.2

0.4

0.6

0.8

1.0

1.2

NPSH[m]

0

2

4

6

8

10

12

P1

P2

5/8



H[m]

0123456789

1011121314

Q [m³/h]0 5 10 15 20

eta[%]

0102030405060708090100

CRE 15-1, 3*400 V, 50Hz

100 %

25 %

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0.0

0.5

1.0

NPSH[m]

0

5

10P1

P2

Rp 2"

M12 x 45

130

30

130178200

90

215256

4 x ø13.5

20

G 1/2

281

167178

400

G 1/2G 1/2

19

87

0-10

V

0/4-

20 m

A4-

20 m

A

1/0

RU

N

STO

P

65

43

2

0/4-

20 m

A0-

10 V

1: D

igita

l inp

ut9:

GN

D (f

ram

e)8:

+24

V7:

Sen

sor i

nput

B:

RS

-485

BY

: S

cree

nA

: R

S-4

85A

6: G

ND

(fra

me)

5: +

10 V

4: S

etpo

int i

nput

3: G

ND

(fra

me)

2: S

tart/

stop

NC

CN

OL1

L2L3

Group 1

Group 3

Group 2

BY

A

10K

Description ValueProduct name: CRE 15-1 A-A-A-E-HQQEProduct No: 96512701EAN number: 5700396616735

Technical:Speed for pump data: 2853 rpmRated flow: 17 m³/hRated head: 9.9 mImpellers: 01Shaft seal: HQQEApprovals on nameplate: CE,TRStages: 02Pump version: AModel: A

Materials:Pump housing: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Material code: ACode for rubber: E

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 10 bar / 120 °C

10 bar / -20 °CFlange standard: OVALConnect code: APipe connection: Rp 2Flange size for motor: FT100

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Electrical data:Motor type: 90SANumber of poles: 2Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 380-480 VRated current: 2,60-2,30 ACos phi - power factor: 0,88-0,77Rated speed: 360-3510 rpmEfficiency: IE3 82,7%Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): FMotor protec: NONEMotor No: 85755805

Others:Label: Grundfos BluefluxMinimum efficiency index, MEI ≥: 0.7Net weight: 53 kgGross weight: 57 kgConfig. file no: 96115803

6/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96512701&freq=50&lang=ENU



Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

96512701 CRE 15-1 50 Hz

Rp

2"

M12

x 4

5

130

30

130

178

200

90

215

256

4 x

ø13.

5

20

G 1

/2

281

167 17

8

400

G 1

/2G

1/2

7/8



Note! All units are in [mm] unless others are stated.

96512701 CRE 15-1 50 Hz

1 9 8 7

0-10 V

0/4-20 mA 4-20 mA

1/0

RUN

STOP

6 5 4 3 2

0/4-20 mA 0-10 V

1: Digital input9: GND (frame)8: +24 V7: Sensor inputB: RS-485BY: ScreenA: RS-485A

6: GND (frame)5: +10 V4: Setpoint input3: GND (frame)2: Start/stop

NC C NO L1 L2 L3

Group 1

Group 3

Group 2

B Y A

10K

8/8

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

Documents

CRE15-01 A-A-A-E-HQQE 3x400 50 HZ - Lenntech · Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 96512701