covelight 26 - Douglas 50-percent submittal... | 1.773.247.9494 Visit focalpointlights.com for complete photometric data. july 2008 A covelight 26 features Low profile indirect luminaire

dimensional data

www.focalpointlights.com | 1.773.247.9494

Visit focalpointlights.com for complete photometric data.

july

200

8 A

covel ight ™ 26

featuresLow profile indirect luminaire designed for concealed cove applications.

Luminaires are provided with quick connect thru–wire harness for easy installation in continuous runs.

Luminaire housing length designed around specified lamp length to minimize socket shadow.

Continuous run lengths may be configured with combinations of luminaire lengths up to 8'.

Covelight™ provides pleasing and even illumination that highlights architectural details.

details

performance

1–Lamp T5HO

76.6% Efficiency

3843 cd @ 125°

6.00"152.4mm

T8 LAMPS

lamping options

T5/T5HO LAMPS

2.00

"50

.8m

m

thru–wireharness

Foc

al P

oint

LL

C |

4141

S.

Pul

aski

Rd,

Chi

cago

, IL

606

32 |

T:

773.

247.

9494

| F

: 77

3.24

7.84

84 |

info

@fo

calp

oint

light

s.co

m |

ww

w.f

ocal

poin

tlig

hts.

com

.

Foc

al P

oint

LL

C r

eser

ves

the

righ

t to

cha

nge

spec

ific

atio

ns f

or p

rodu

ct i

mpr

ovem

ent

wit

hout

not

ific

atio

n.

details

perimeter 363

fixture:

project:

ordering

luminaire seriesCovelight T5/T5HO FCVM

Covelight T8 FCVA

profile 262" x 6" 26

lampingOne Lamp T8 1T8

(FCVA only)

One Lamp T5 1T5

One Lamp T5HO 1T5HO

Two Lamp T5 2T5

Two Lamp T5HO 2T5HO(T5 units supplied to match lamp length

See Luminaire Lengths chart for more information)

circuitSingle Circuit 1C

Dual Circuit 2C(Two lamps only)

voltage120 Volt 120

277 Volt 277

347 Volt 347

ballastElectronic Instant Start <20% THD E

(T8 Only)

Electronic Program Start <10% THD S

Electronic Dimming Ballast* D

mounting CVCove CV

factory optionsEmergency Circuit * EC

Emergency Battery Pack* EM

HLR/GLR Fuse FU

Include 3000K Lamp L830



finish HWHigh Reflectance White HW

luminaire lengthDesignate length in feet XX'

(Nominal lengths: 2',3',4',5',6',7',8')

specifications

construction One-piece 20 Ga. housing.

20 Ga. steel socket bridges and galvanized end caps.

Luminaires are available up to 8' nominal lengths.

T5 and T5HO luminaires are shorter due to lamp length. 4' unit weight: 7 lbs

8' unit weight: 14 lbs

optic Reflector fabricated of low iridescent, semi specular premium grade aluminum.

electrical Luminaires are pre-wired with factory installed branch circuit wiring and over-molded quick connects.

Electronic ballasts are thermally protected and have a Class “P” rating.

Consult factory for dimming specifications and availability.

UL and cUL listed.

finish Polyester powder coat applied over a 5-stage pre-treatment.

Standard luminaire housing finished in High Reflectance White.

* for more information see Reference section.

fixture lengthst8

8'

96.00"7'

84.00"6'

72.00"5'

60.00"4'

48.00"3'

36.00"2'

24.00"

t5/t5ho

8'

92.10"7'

80.30"6'

68.50"5'

57.90"4'

46.10"3'

34.30"2'

22.40"

covel ightTM 260

769

1538

2307

3076

3845

180 ° 170° -170° 160° -160° 150° -150° 140°

0° 45°

90°

90° 45°

0°

130°

120°

110°

100°

90°

CANDLEPOWER DISTRIBUTION LUMEN SUMMARY

Filename: FCVM261T5H.IES

Catalog #: FCV-26-1T5HO-1C-120-E-CV-HW-4’

Efficiency: 82.5%

Test #: 12554.0

0°

5°

15°

25°

35°

45°

55°

65°

75°

85°

90°

95°

105°

115°

125°

135°

145°

155°

165°

175°

180°

0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0

591 613 619 575 75 378

2259 2255 2130 1366 343 1077

3679 3465 2775 1410 639 1373

3843 3513 2600 1512 920 1347

3453 3134 2344 1725 1216 1211

2499 2359 2096 1700 1346 915

2349 2265 2062 1790 2538 733

2081 2033 1931 1744 1632 466

1832 1813 1772 1733 1678 162

1711 1711 1711 1711 1711

Vertical Horizontal Angle Zonal Angle 0° 22.5° 45° 67.5° 90° Lumens

2828 28.3 36.9

4175 41.7 54.5

6300 63.0 82.2

7661 76.6 100.0

7661 76.6 100.0Total

Luminaire

% % Zone Lumens Lamp Fixt

90°-120°

90°-130°

90°-150°

90°-180°

0°-180°

Go to www.focalpointlights.com for additional photometric data.

covel ight standard run length

Continuous Runs consist of standard fixture lengths. Some fixtures may exceed nominal length consult individual cut sheets for details.

Example: 31' run = three 8' fixtures and one 7' fixture.

nominal run length (in feet)

standard fixture lengths required lamp sizes

2 2 2

3 3 3

4 4 4

5 5 5

6 6 3 3

7 7 4 3

8 8 4 4

9 6 3 3 3 3

10 6 4 3 3 4

11 8 3 4 4 3

12 8 4 4 4 4

13 7 6 4 3 3 3

14 8 6 4 4 3 3

15 8 7 4 4 4 3

16 8 8 4 4 4 4

17 8 6 3 4 4 3 3 3

18 8 6 4 4 4 4 3 3

19 8 8 3 4 4 4 4 3

20 8 8 4 4 4 4 4 4

21 8 7 6 4 4 4 3 3 3

22 8 8 6 4 4 4 4 3 3

23 8 8 7 4 4 4 4 4 3

24 8 8 8 4 4 4 4 4 4

25 8 8 6 3 4 4 4 4 3 3 3

26 8 8 6 4 4 4 4 4 4 3 3

27 8 8 8 3 4 4 4 4 4 4 3

28 8 8 8 4 4 4 4 4 4 4 4

29 8 8 7 6 4 4 4 4 4 3 3 3

30 8 8 8 6 4 4 4 4 4 4 3 3

31 8 8 8 7 4 4 4 4 4 4 4 3

nominal run length (in feet)

standard fixture lengths required lamp sizes

32 8 8 8 8 4 4 4 4 4 4 4 4

33 8 8 8 6 3 4 4 4 4 4 4 3 3 3

34 8 8 8 6 4 4 4 4 4 4 4 4 3 3

35 8 8 8 8 3 4 4 4 4 4 4 4 4 3

36 8 8 8 8 4 4 4 4 4 4 4 4 4 4

37 8 8 8 6 7 4 4 4 4 4 4 4 3 3 3

38 8 8 8 8 6 4 4 4 4 4 4 4 4 3 3

39 8 8 8 8 7 4 4 4 4 4 4 4 4 4 3

40 8 8 8 8 8 4 4 4 4 4 4 4 4 4 4

41 8 8 8 8 6 3 4 4 4 4 4 4 4 4 3 3 3

42 8 8 8 8 6 4 4 4 4 4 4 4 4 4 4 3 3

43 8 8 8 8 8 3 4 4 4 4 4 4 4 4 4 4 3

44 8 8 8 8 8 4 4 4 4 4 4 4 4 4 4 4 4

45 8 8 8 8 7 6 4 4 4 4 4 4 4 4 4 3 3 3

46 8 8 8 8 8 6 4 4 4 4 4 4 4 4 4 4 3 3

47 8 8 8 8 8 7 4 4 4 4 4 4 4 4 4 4 4 3

48 8 8 8 8 8 8 4 4 4 4 4 4 4 4 4 4 4 4

49 8 8 8 8 8 6 3 4 4 4 4 4 4 4 4 4 4 3 3 3

50 8 8 8 8 8 7 3 4 4 4 4 4 4 4 4 4 4 4 3 3



Visit focalpointlights.com for complete photometric data.

apri

l 20

11 B

avenue ® a

dimensional data

featuresNarrow aperture high performance T5/T5HO asymmetric wall wash.

Precision micro-optic delivers shadow free illumination from the ceiling to the floor.

Features 2" narrow aperture for clean unobtrusive aesthetic.

Drywall installation is available, which allows for both individual or continuous row mount capability.

Great solution for conference rooms, highlighting artwork, corridors, white board or any application that requires high levels of vertical illumination.

detail

companion luminaire

performance

1–Lamp T5HO

57% Efficiency

1933 cd @ 25°

drywall row mount

2.20"55.88mm

3.20"81.28mm

4.3"109.22mm

.54"13.72m

m

4.00"101.60m

m

3.20"81.28mm

4.3"109.22mm

6.5"165.1mm

24-30" RecommendedDistance from Wall

Grid Mount

Drywall Flangeframe width

4.75" max–4.625" min

Mounting yoke must be installed before drywall.(see Instruction Sheet #ISO214 for details)

3.50

"88

.9m

m

lens

recessedwall mount

linearmr16

Use in place of multiple halogen or compact fluorescent wall washers.

open optic clear lens

shielding options

Foc

al P

oint

LL

C |

4141

S.

Pul

aski

Rd,

Chi

cago

, IL

606

32 |

T:

773.

247.

9494

| F

: 77

3.24

7.84

84 |

info

@fo

calp

oint

light

s.co

m |

ww

w.f

ocal

poin

tlig

hts.

com

.

Foc

al P

oint

LL

C r

eser

ves

the

righ

t to

cha

nge

spec

ific

atio

ns f

or p

rodu

ct i

mpr

ovem

ent

wit

hout

not

ific

atio

n.

recessed

fixture:

project:

mounting information

1 1/2"

1 1/2"

1 1/2"

1 11/16"

1 11/16"

1 1/2"

ordering

luminaire series FAVAAvenue A FAVA

shieldingNo Shielding, Open Optic NS

Snap-on Clear Lens CL(Radial cut-off louver FAVA-RL

cannot be field installed on the FAVA-NS or FAVA-CL)

lampingOne Lamp T5 1T5

One Lamp T5HO 1T5HO

circuits 1CSingle Circuit 1C

voltage120 Volt 120

277 Volt 277

347 Volt 347

ballastElectronic Program Start <10% THD S

Electronic Dimming Ballast* D

ceiling configurations*Drywall Flange F

(Consult factory for custom variations)

Std. 15/16" Lay-in G1

Std. 15/16" Tegular T1

Std. 15/16" Tegular, against Tee T1T

Std. 9/16" Lay-in G2

Std. 9/16" Tegular T2

Std. 9/16" Tegular, against Tee T2T

9/16" Slot-tee Tegular G3

Tall 15/16" Lay-in G4

Tall 15/16" Tegular T4

Tall 15/16" Tegular, against Tee T4T

Tall 9/16" Lay-in G5

Tall 9/16" Tegular T5

Tall 9/16" Tegular, against Tee T5T

Node 9/16" Tegular T6

Node 9/16" Tegular, against Tee T6T

factory optionsChicago Plenum CP

Emergency Battery Pack* EM(3' & 4' Luminaires Only)

Earthquake Clips EQ

Flex Whip* FW

HLR/GLR Fuse FU

Include 3000K Lamp* L830



Lutron™ Sensor Feed* SF(EcoSystem ballast required)

finishMatte White Housing WH

Titanium Silver TS

Matte Black Housing BK(Perforated diffuser always painted black)

luminaire length2' Nominal Housing 2'

3' Nominal Housing 3'

4' Nominal Housing 4'

5' Nominal Housing 5'(Consult factory for 5' dimming)

(For continuous row mount in drywall ceiling, specify luminaire run length, ie 24')

specifications

construction One-piece 20 Ga. steel housing.

Grid luminaires include 20 Ga. steel, .5" wide universal flange rail.

Drywall flange option is provided with 20 Ga. steel, .5" wide flange kit and 20 Ga. galvanized steel mounting yoke. 2' unit weight: 5 lbs.

3' unit weight: 6 lbs.



optic .020" specular aluminum upper reflector and .020" semi-specular lower reflector.

24 Ga. perforated matte black diffuser with 24% opening. please note:

radial cut-off louver FAVA-RL cannot be field installed on the non-shielded profile FAVA-NS.

electricalLuminaires are individually wired for specified circuits.

Thru-wiring not available.

Electronic ballasts are thermally protected and have a Class “P” rating.

Optional dimming ballasts available.

Consult factory for dimming specifications and availability.

UL and cUL listed.

finish Polyester powder coat applied over a 5-stage pre-treatment.

Perforated diffuser always finished in Matte Black.

363

3' unit (cutout dimension: 3.5" x 35.6")


Drywall flange version provided with mounting yoke.5' unit (cutout dimension: 3.5" x 59.6")


grid

drywall

StandardG2, T2, T2T

1 1/2"

StandardG1, T1, T1T

1 1/2"

15/16"

1 1/2"

Slot teeG3

TallG4, T4, T4T

1 11/16"

TallG5, T5, T5T

1 11/16"

NodeT6, T6T

1 1/2"

15/16"

9/16"

9/16"

9/16"

9/16"

lay-in tile tegular tile

* for more information see Reference section.

avenue® a

0 390

780

1170

1560

1950

0° 10° 20° 30° 40°

0°45°

90°

90°45°

0°

90°

80°

70°

60°

50°

CANDLEPOWER DISTRIBUTION LUMEN SUMMARY

Filename: FAVANS1T5H.IES

Catalog #: FAVA-NS-1T5HO-1C-120-S-G-WH-4’

Efficiency: 57%

Test #: 12355.0

0°

5°

15°

25°

35°

45°

55°

65°

75°

85°

90°

95°

105°

115°

125°

135°

145°

155°

165°

175°

180°

108 108 108 108 108

276 256 214 154 101 13

919 771 499 291 102 85

1933 1873 1300 415 101 279

1832 1799 1695 707 96 408

1806 1775 1647 1296 88 610

1434 1416 1329 1108 74 580

1072 1052 962 811 56 473

655 631 568 458 39 294

317 294 224 129 14 119

183 165 112 40 2

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0 0

0 0 0 0 0

Vertical Horizontal Angle Zonal Angle 0° 22.5° 45° 67.5° 90° Lumens

376 7.5 13.2

784 15.7 27.4

1975 39.5 69.0

2861 57.2 100.0

2861 57.2 100.0Total

Luminaire

% % Zone Lumens Lamp Fixt

0°-30°

0°-40°

0°-60°

0°-90°

0°-180°

Go to www.focalpointlights.com for additional photometric data.

avenue a grid cei l ing configurations

G1lay-in tile,

any fixture placement

T1tegular tile,

fixture between tees

T1Ttegular tile,

fixture against tee

1 1/2" 1 1/2" 1 1/2"

1 1/2"1 11/16" 1 11/16"

1 3/4"

1 3/4"

15/16"

15/16"

9/16" 9/16"

9/16" 9/16"

Standard 15/16"

G2lay-in tile,


T2tegular tile,


T2Ttegular tile,

fixture against tee

1 1/2" 1 1/2" 1 1/2"

1 1/2"1 11/16" 1 11/16"

1 3/4"

1 3/4"

15/16"

15/16"

9/16" 9/16"

9/16" 9/16"

Standard 9/16"

G3slot-tee tegular tile,


1 1/2" 1 1/2" 1 1/2"

1 1/2"1 11/16" 1 11/16"

1 3/4"

1 3/4"

15/16"

15/16"

9/16" 9/16"

9/16" 9/16"

Slot Tee 9/16"

Avenue A is configured at our factory to integrate easily with your specified grid type, tile style and fixture position. Please review the below options and choose the mounting code that matches your application.


lay-in tile tegular tile

fixture against teetile style

fixture position


G4lay-in tile,


T4tegular tile,


T4Ttegular tile,

fixture against tee

1 1/2" 1 1/2" 1 1/2"

1 1/2"1 11/16" 1 11/16"

1 3/4"

1 3/4"

15/16"

15/16"

9/16" 9/16"

9/16" 9/16"Tall 15/16"

G5lay-in tile,


T5tegular tile,


T5Ttegular tile,

fixture against tee

1 1/2" 1 1/2" 1 1/2"

1 1/2"1 11/16" 1 11/16"

1 3/4"

1 3/4"

15/16"

15/16"

9/16" 9/16"

9/16" 9/16"Tall 9/16"

T6tegular tile,


T6Ttegular tile,

fixture against tee

1 1/2" 1 1/2" 1 1/2"

1 1/2"1 11/16" 1 11/16"

1 3/4"

1 3/4"

15/16"

15/16"

9/16" 9/16"

9/16" 9/16"Node 9/16"

reference 363

Type Catalog number

............................. .......................................................................................................

............................. .......................................................................................................

ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs and write it on the appropriateline. Order accessories as separate catalog numbers (shipped separately).

Compact Fluorescent Downlights

8" AFOpen Reflector

Horizontal LampTriple-Tube

AF 8 TRT OPEN DCF-180

Aperture: 7-7/8 (20.1)Ceiling Opening: 8-7/8 (22.5)Overlap Trim: 9-1/4 (23.5)

15-7/8 (40.3)

Options

8AR Clear8PR Pewter

8UBR Umber8WTR Wheat8WR1 White painted8MB1 Black baffle8WB1 White baffle8BC1 Black cone

(blank) Semi-specular

LD Matte-diffuse

1/18TRT1/26TRT1/32TRT1/42TRT1/57TRT2/18TRT2/26TRT2/32TRT2/42TRT

AF

Series

AF

Wattage/Lamp Voltage Ballast3

MVOLT2

120277347

Finish

Accessories

SCA8 Sloped ceiling adapter.Degree of slope must bespecified (10D, 15D, 20D,25D, 30D). Ex: SCA8 10D

Order as separate catalog number.

(blank) Electronic ballastECOS EcoSystem

electronicdimming ballast.Minimumdimming level 5%.

ADEZ4 Advance Mark 10®

electronic dim-ming ballast.Minimum dimminglevel 5%

S5 HW5 SIMPLY5TM

ballast less Reloc

Example: AF 2/32TRT 8AR MVOLT

FEATURESOPTICAL SYSTEM• Reflector - Self-flanged, semi-specular or matte-diffuse

reflector. Fluted vertical upper section works in con-junction with patented Bounding RayTM Optical Principledesign (U.S. Patent No. 5,800,050) to provide lamp beforelamp image and smooth transition from top of reflectorto bottom. Minimum flange matches reflector finish.

• Baffle/cone - Semi-specular clear upper reflector.Microgroove baffle with white painted flange or specularblack cone with flange that matches cone finish.

• Hinged lampdoor seals upper trim for optimal fixtureefficiency and the reduction of stray light in the plenum.

MECHANICAL SYSTEM• 16-gauge galvanized steel mounting/plaster frame with

integral yoke to retain optical system. Maximum 1-1/2"ceiling thickness.

• 16-gauge galvanized steel mounting bars with continu-ous 4" vertical adjustment are shipped pre-installed.Post installation adjustment possible without the use oftools from above or below the ceiling.

• Galvanized steel junction box with hinged access coversand spring latch. Two combination 1/2"–3/4" and three 1/2" knockouts for straight-through conduit runs. Capacity:8 (4 in, 4 out) No. 12 AWG conductors, rated for 90°C.

ELECTRICAL SYSTEM• Horizontally-mounted, positive-latch, thermoplastic

socket.• Class P, thermally protected, high power factor elec-

tronic ballast mounted to the junction box.• Simply5TM technology available.

LISTING• Fixtures are UL Listed for thru-branch wiring, Non-IC

recessed mounting and damp locations. Listed andlabeled to comply with Canadian Standards.

EL6 Emergency battery packwith integral test switch

ELR6 Emergency battery pack.Remote test switch

GMF Single, slow-blow fuse (notavailable with MVOLT)

GLR Single, fast-blow fuse (notavailable with MVOLT)

TRW White painted flange(standard on MB and WB)

TRBL Black painted flangeWLP With 3500°K lamp (shipped

separately)LRC7 Provides compatibility with

Lithonia Reloc System. RelocSystem can be installed lessthis option with connectorsprovided by others. Accessabove ceiling required

CP8 Chicago PlenumCSA CSA Certified

BDP9 Ballast disconnect plugELHL6 High lumen output

emergency battery pack.Integral test switch provided

ELRHL6 High lumen outputemergency battery pack.Remote test switch provided

NSD10 Sensorswitch nLightTM

dimming relay

NOTES1 Not available with finishes.2 Multi-volt electronic ballast capable of operating on any voltage

from 120V through 277V, 50 or 60 Hz.3 For additional ballast types, refer to Technical Bulletins.4 Available in 120V or 277V only. Minimum dimming level 5%.5 Simply5TM includes 9' S5 MLC Reloc wiring system (shipped sepa-

rately). Available in 120V or 277V only. Not available in 18W or 57W.See simply5.net for more information.

6 For dimensional changes, refer to TECH-140.7 For compatible Reloc systems, refer to TECH-110.8 Not available with EL or ELR option.9 Meets codes that require in-fixture disconnect.10 One 5A relay with one 0-10 VDC dimming output, shipped

installed. Requires additional nLight bus power supply.

8-3/4(22.2)

14-1/2(36.8)

All dimensionsare inches(centimeters)

Aperture/Trim color

DCF-180

©2003, 2009, 2011 Acuity Brands Lighting, Inc.

8" AF Open ReflectorDistribution curve Distribution data Output data Coefficient of utilization Illuminance Data at 30" Above Floor for

a Single Luminaire

AF 1/32TRT 8AR, (1) CF32DT/E/IN/835, 2400 lumens per lamp, 1.3 s/mh, Test no. LTL9452

From 0° cp. Lumens

0° 10055° 1053 9515° 1140 27525° 1105 41635° 768 40545° 622 35455° 42 4665° 11 1175° 9 1085° 8 890° 0

ρ f 20%ρ c 80% 70% 50%ρw 50% 30% 50% 30% 50% 30%1 74 72 72 70 69 682 67 64 66 63 64 613 62 57 61 57 59 564 56 52 56 51 54 505 52 47 51 47 50 466 48 43 47 43 46 427 44 39 43 39 43 388 41 36 40 36 39 359 38 33 37 33 37 3310 35 31 35 30 34 30

Zone Lumens %lamp

0°-30° 785.7 32.70°-40° 1190.3 49.60°-60° 1590.4 66.30°-90° 1619.7 67.5

90°-180° 0.0 0.00°-180° 1619.7 67.5*

*Efficiency

50% 10%beam angle 61.0° beam angle 94.7°

Initial fc fc at fc atMount at beam Beam beam Beam beamheight center diameter edge diameter edge

8' 33.2 6.5 16.6 11.9 3.310' 17.9 8.8 8.9 16.3 1.812' 11.1 11.2 5.6 20.6 1.114' 7.6 13.5 3.8 25.0 0.816' 5.5 15.9 2.8 29.3 0.6

NOTES:1 For electrical characteristics, refer to Technical Bulletins tab.2 Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field

measurements. Dimensions and specifications are based on the most current available data and are subject to change without notice.3 Consult factory or IES file for microgroove baffle, black cone and other photometric reports.


From 0° cp. Lumens

0° 12955° 1303 12215° 1437 37325° 1347 58835° 998 57045° 848 46455° 42 4965° 4 475° 1 185° 0 090° 0

ρ f 20%ρ c 80% 70% 50%ρw 50% 30% 50% 30% 50% 30%1 74 72 73 71 70 692 68 65 67 64 65 623 62 59 61 58 60 574 57 53 56 52 55 515 53 48 52 48 51 476 49 44 48 43 47 437 45 40 44 40 43 398 41 37 41 37 40 369 38 34 38 34 37 3310 36 31 36 31 35 31

Zone Lumens %lamp

0°-30° 1083.2 33.80°-40° 1653.4 51.70°-60° 2166.3 67.70°-90° 2171.7 67.9

90°-180° 0.0 0.00°-180° 2171.7 67.9*

*Efficiency



8' 42.8 6.9 21.4 12.0 4.310' 23.0 9.5 11.5 16.3 2.312' 14.3 12.0 7.2 20.7 1.414' 9.8 14.5 4.9 25.0 1.016' 7.1 17.0 3.6 19.3 0.7


From 0° cp. Lumens

0° 15845° 1676 16515° 1720 51425° 1849 79535° 1348 81545° 830 54955° 36 6365° 5 675° 2 285° 0 090° 0

ρ f 20%ρ c 80% 70% 50%ρw 50% 30% 50% 30% 50% 30%1 66 65 65 64 63 612 61 58 60 57 58 563 56 52 55 52 53 514 51 48 51 47 49 465 47 43 47 43 46 426 44 39 43 39 42 397 40 36 40 36 39 358 37 33 37 33 36 339 35 31 34 30 34 3010 32 28 32 28 31 28

Zone Lumens %lamp

0°-30° 1473.7 30.70°-40° 2288.7 47.70°-60° 2901.1 60.40°-90° 2909.7 60.6

90°-180° 0.0 0.00°-180° 2909.7 60.6*

*Efficiency



8' 52.4 7.4 26.2 11.9 5.210' 28.2 10.1 14.1 16.2 2.812' 17.6 12.8 8.8 20.5 1.814' 12.0 15.5 6.0 24.8 1.216' 8.7 18.2 4.3 29.1 0.9


From 0° cp. Lumens

0° 22115° 2248 22515° 2270 70725° 2205 109735° 1699 113745° 1092 74955° 47 8465° 7 875° 3 385° 0 090° 0

ρ f 20%ρ c 80% 70% 50%ρw 50% 30% 50% 30% 50% 30%1 69 67 67 66 65 642 63 60 62 59 60 583 58 54 57 54 55 524 53 49 52 49 51 485 49 45 48 44 47 446 45 41 45 40 44 407 42 37 41 37 40 378 39 34 38 34 37 349 36 32 36 31 35 3110 33 29 33 29 33 29

Zone Lumens %lamp

0°-30° 2029.5 31.70°-40° 3166.3 49.50°-60° 3999.6 62.50°-90° 4009.9 62.7

90°-180° 0.0 0.00°-180° 4009.9 62.7*

*Efficiency



8' 73.1 7.4 36.5 11.8 7.310' 39.3 10.0 19.7 16.1 3.912' 24.5 12.7 12.2 20.4 2.414' 16.7 15.4 8.4 24.7 1.716' 12.1 18.1 6.1 29.0 1.2

Annual*Energy

Cost$5 .44$5 .08$5 .93$5 .92

Lamps (1 ) 32W TRT(1) 42W TRT(2) 32W TRT(2) 42W TRT

LampLumens

2400320048006400

0.981 .000 .960 .95

InputWatts

36466994

*Comparative yearly l ighting energy cost per 1000 lumens

LER.DOL44474041

Bal last Factor

ENERGY (Calculated in accordance with NEMA standard LE-5A)

FLUORESCENT 2RT5-2X4

Catalog Number

Notes

Type

All dimensions are inches (centimeters) unless otherwise specified.

Specifications

Length: 48 (121.8)

Width: 24 (61.0)

Depth: 3-1/8 (7.9)

2RT5 2'X 4'

2 LampsPremier or Premier XP T5

FEATURES & SPECIFICATIONSINTENDED USE — RT5 is designed for applications that require the extremely energy efficient delivery of comfortable volumetric light from a lay-in fixture that is appealing and shallow in depth. Ideal for offices, schools, hospitals, retail and numerous other commercial applications. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.CONSTRUCTION — Impact modified acrylic prismatic refractor with polymer light-diffusing film.Rugged, one-piece, cold-rolled steel reflector with embossed facets. Polyester powder paint after fabrication.Rigid structure with ballast box and endplates with integral T-bar clips.Fixtures may be mounted end-to-end.OPTICS — Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount to walls, cubicles, work surfaces and people.Luminous characteristics are carefully managed at high angles, providing just enough intensity to deliver the volumetric effect.Regressed, two-piece refractive system obscures and softens the lamp and smoothly washes the reflector with light.Linear faceted reflector softens and distributes light into the space and minimizes the luminance ratio between the fixture and the ceiling.Mechanical cut-off across the reflector and fresnel refraction along the refractor provide high angle shielding and a quiet ceiling.Sloped endplates provide a balanced fixture to ceiling ratio while enhancing the perception of fixture depth.ELECTRICAL — Highly efficient program-start electronic ballasts, Class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified, sound rated A. Your choice of Premium or Premium XP T5 lamp with enhanced phosphors and 85 CRI. Ballast/lamp efficacy up to 100+ LPW. Lamp is TCLP compliant. 0.90 or 0.95 ballast factor standard for typical applications. 1.15 ballast factor or F54T5HO lamping available for higher ceiling height applications.Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.S5 option available for use with SIMPLY5™ Lighting Intelligence system with multi-level dimming. See SYNERGY® Lighting Controls specification sheets for more information. Ballast Disconnect provided standard where required to comply with U.S. and Canadian electrical codes.INSTALLATION — Side mounted ballast tray accessed by removing adjacent ceiling tile. Ballast tray may be removed from fixture during service.Lamps accessed by squeezing refractor to release from retention tabs.LISTING — UL Listed (standard). Optional: Canada CSA or cUL. Mexico NOM.WARRANTY — Fixture guaranteed for one year against mechanical defects in manufacture. Lamp and ballast system warranty (24 months for lamp, 60 months for ballast) by lamp and ballast manufacturer.

Notes1 For T5HO applications, use GEB10PS, GEB80 or GEB80S ballast.

2 MVOLT (120-277 volts), 50-60HZ.

3 For 347V, use GEB95S or GEB10PS.

4 Only option for 347V.

5 Not available with 28T5.

6 SIMPLY5 includes 13' S5 SSC RELOC® wiring system, specify

2RT5

Series Lamp type Voltage Ballast Lamp7 Options

2RT5 Recessed T5 28T5 28W T5 (46")54T5HO 54W T5 (46")1

MVOLT2

3473

GEB95 .95 ballast factor GEB95S .95 ballast factor, step dimming4

GEB115 1.15 ballast factor

GEB115S 1.15 ballast factor, step dimming

GEB10PS 1.0 ballast factor, program start5

S5 .95 ballast factor SIMPLY5TM system6

GEB80 .80 ballast factor1

GEB80S .80 ballast factor, step dimming1

GEB90 .90 ballast factor

GEB90S .90 ballast factor, step dimming


LPM835P Premier 3500° K 28W lamp8



L835XP Premier XP 3500° K 28W lamp8



LP835 3500° K 54W lampLP830 3000° K 54W lampLP841 4100° K 54W lamp

GLR Internal fast-blow fuse9

PWS1836 6' prewire, 3/8" diameter, 18-gauge, 3-wire (n/a with step dimming)10

PWS1846 6' prewire, 3/8" diameter, 18-gauge, 4-wire11

EL14 Emergency battery pack12


HW Hardware for SIMPL5 system; replaces RELOC®

CSA Listed and labeled to comply with Canadian standards

BDP Ballast disconnect plug (meets codes that require in-fixture disconnect)

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: 2RT5 28T5 MVOLT GEB95 LPM835P

24(61.0)

3-1/8(7.9)

Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633; D544,634; D544,992; D544,933 and additional patent pending.Specifications subject to change without notice.

voltage unless HW (hardwire) or PWS is ordered.

7 Required. All fixtures shipped with lamps installed.

8 28T5 lamp type only.

9 Must specify voltage, 120 or 277.

10 For use with standard ballast.

11 For use with step dimming ballast.

12 See PS1400QD spec sheet for EL lumen output information.

http://www.acuitybrandslighting.com/Library/LL/documents/specsheets/Acrylic-Compatibility.pdf

2RT5-2X4

FLUORESCENT: One Lithonia Way Conyers, GA 30012 Phone: 800.315.4963 Fax: 770-981-8191 www.lithonia.com ©2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/20/10

2RT5 Volumetric Recessed Lighting 2' x 4'

2RT5 28T5 GEB95 LPM835P, (2) FP28/835/PM/ECO lamps, 2730 lumens per lamp, s/m 1.2 (along) 1.3 (across), test no. LTL13260

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

300

600

900

1200

1500

1800

Coefficients of Utilizationpf 20%pc 80% 70% 50%pw 70%50%30% 50%30%10% 50%30%10%

10798898275696359555148

10794827264575247433936

10791766556494439353229

10592817163565146423936

10589756456494339353229

10586705950433833302724

10088776861544945413835

10086736354484238343128

10083695849433733302724

RC

R

0123456789

10

Zonal Lumen SummaryZone Lumens % Lamp % Fixture0˚ - 30˚0˚ - 40˚0˚ - 60˚0˚ - 90˚90˚ - 180˚0˚ - 180˚

1383226439764908

04908

25.341.572.889.90.089.9

28.246.181.0

100.00.0

100.0

Efficiency: 89.9%

CP Summary0˚ 90

0˚5˚15˚25˚35˚45˚55˚65˚75˚85˚90

177017661695155513391044695393179300

1770175017071623147312801071715257210

*The LER (Luminaire Efficacy Rating) is the lumens per watt rating for this fixture. It is used to compare the energy efficiency of various products. This photometric report is based upon IES testing procedures, as stated in LM-41-1998. The reported lumen rating is based upon lamp manufacturer’s published lumen output for the cold spot temperature measured during lamp calibration.

LER: 80.4 lpw

Input Wattage Ballast 120/277

GEB90 55/54 GEB90S

GEB90S 27 @50% power mode

GEB95 60/58 GEB95S

GEB95S 28/28 @50% power mode

GEB115 73/71 GEB115S


GEB80 96/93 GEB80S


S5 60/58

T5/T8 Energy Comparison

System Lamp Ballast Input Watts Saved Type Factor Watts Compared to T8

3-lamp T8 F32T8 0.88 88 – 2RT5 2-lamp T5 F28T5XP 0.90 54 34 2RT5 2-lamp T5 F28T5 0.95 58 30 2RT5 2-lamp T5 F28T5 1.15 71 17

Corridor Acrylic Wraparound

CA2', 3', 4' and 8' Length

1 or 2 Lamps

FEATURES & SPECIFICATIONSATTRIBUTESSlim, low-profile housing for ceiling or wall mounting. Matches AW Series inappearance.Choice of flat-bottom diffusers –– prismatic acrylic or matte white opalacrylic. Both available in high-impact versions. Certain airborne contami-nants can diminish integrity of acrylic. Click here for Acrylic Environmen-tal Compatibility table for suitable uses.Diffuser hinges open from either side for easy cleaning and servicing.For surface or stem mounting, individual or row installation.Available in tandem-wired lengths.Guaranteed for one year against mechanical defects in manufacture.CONSTRUCTIONHousing formed from cold-rolled 20-gauge steel. End plates welded tohousing. Standard product complies with NYC requirements; no optionsnecessary. No asbestos is used in this product.Thermally protected, resetting, Class P, HPF, non-PCB, UL listed, CSA certi-fied ballast is standard. Ballasts are sound rated A. Standard combinationsare CBM approved and conform to UL 935.FINISHHigh-gloss, baked white enamel finish. Five-stage iron-phosphate pretreat-ment ensures superior paint adhesion and rust resistance. Painted partsfinished with high-gloss, baked white enamel.ELECTRICAL SYSTEMFixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN orTHHN wire used throughout, rated for required temperatures.ENERGYLuminaire Efficacy Rating (LER) and Annual Energy Cost:Two-lamp LER.FW = 62. Annual Energy Cost = $3.87.Based on 32W T8 lamp, 2850 lumens, and energy-saving electronic ballast.Ballast factor = .88, input watts = 61.

Calculated in accordance with NEMA standard LE-5.

LISTINGUL listed to US and Canadian safety standards (see Options). NOM Certified(see Options).Specifications subject to change without notice.

Sheet #: CA WRAP-120

Catalog Number

Notes Type

Fluorescent

Options

GEB10IS Electronic ballast, <10% THD,instant start

GEB10PS Electronic ballast, <10% THD,program start

EL Emergency battery pack(nominal 300 lumens; see LifeSafety Section)


GMF Internal slow-blow fuse3

RIF1 Radio interference filter (1 perfixture)

CSA Listed and labeled to comply withCanadian Standards

NOM NOM Certified

Voltage

347MVOLT2

Othersavailable.

Lamp type

17 17W T8 (24")25 25W T8 (36")28 28W T5 (46-1/2")1

32 32W T8 (48")

AccessoriesOrder as separate item.

SQ Swivel-stem hanger (specify in 2" increments)1B Ceiling spacer (adjusts from 1-1/2" to 2-1/2" from

ceiling)DSH24 Double-stem hanger for 4' fixtures, 24" stems

Series

CA Corridorwraparound

For tandem double-length unit, add prefix T.Example: TCA

Number oflamps

12

Not included.

Diffuser

(blank) PrismaticAR High-impact

prismaticACW Matte whiteAWR High-impact

matte white

Notes

1 All T5 lamp types use GEB10PS ballasts only.2 Electronic ballast operates 120V through 277V.3 Specify voltage.

Lead times may vary depending on options selected. Consult with your sales representative.Example: CA 2 32 MVOLT GEB10IS

ORDERING INFORMATION


DIMENSIONSInches (millimeters). Subject to change without notice.

MOUNTING DATAFor unit or row installation, surface or stem mounting. Stem mounting notavailable on TCB units.

Individual installation — One double-stem (4' only) or two single-stemhangers required.Row installation — One hanger per fixture plus one per row required.See ACCESSORIES below for hanging devices.

CA Corridor Acrylic Wraparound

DSH

Sheet #: CA ©1996-2010 Acuity Brands Lighting, Inc., All rights reserved. Rev. 4/1/10

Lithonia LightingFluorescentOne Lithonia Way, Conyers, GA 30012Phone: 800-858-7763 Fax: 770-929-8789www.lithonia.com

PHOTOMETRICSCalculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lampconfigurations shown are typical. Full photometric data on these and other configurations available upon request.

CA 2 32Report LTL 6020 – Lumens per lamp = 2900S/MH (along) 1.2 (across) 1.5Coefficient of UtilizationCeiling 80% 70% 50% 0%Wall 70% 50% 30% 70% 50% 30% 50% 30% 10% 0%

0 87 87 87 83 83 83 77 77 77 641 78 774 70 75 71 68 66 63 61 512 71 64 59 68 62 57 57 53 50 423 65 57 50 62 54 49 51 46 42 364 59 50 43 56 48 42 45 40 36 305 54 44 37 52 43 36 40 34 30 266 50 39 33 47 38 32 36 30 26 227 46 35 29 44 34 28 32 27 23 198 42 32 25 40 31 25 29 23 20 179 39 29 22 37 28 22 26 21 17 14

10 36 26 20 35 25 19 24 18 15 12Zonal Lumens Summary

Zone Lumens %Lamp %Fixture

0-30 886 15.3 20.40-40 1481 25.5 34.00-60 2627 45.3 60.40-90 3696 63.7 85.0

90-180 654 11.3 15.00-180 4350 75.0 100.0

C = 7/8 (22) Dia.K.O.D = 11/16 (17) Dia. K.O.E = 2 (51) Dia. K.O. and

7/8 (22) Dia. K.O.F = 7/16 (11) Dia.K.O.J = 11/16 x 1 (17 x 25) K.O.N = 5/16 (8) Dia. holeP = 5/16 x 3/4 (8 x 19) K.O.

FeatureS & SpeCIFICatIoNSINteNDeD uSe — Suitable for cold weather (down to -40oC), wet location, security/prisons and high-abuse applications.

CoNStruCtIoN — Durable cast aluminum construction – rugged, low-profile housing is .250 to .525" thick.

NEMA 4X option available for wet and hose-down applications.

Clear, UV-stable polycarbonate cover is .130" thick to prevent cracking or breaking. Cover is secured with four stainless steel, Torx T20 tamperproof screws with center pin.

Polycarbonate faceplate incorporates universal directional chevron knockouts that are concealed and easily removed and replaced.

Universal mount (UM) option available – top, back, end mounting or conduit entry (canopy provided).

Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating.

u.S. patent No. 5,611,163 and D383,501.

optICS — Lamp is constructed using new LED technology. Provides perfectly uniform illumination.

Expected LED life of up to 10 years, based on continuous operation. Single-face exit uses one LED lamp; double-face exit uses two LED lamps.

Low energy consumption — red lamp consumes 2.3W (120V); green lamp consumes 1.7W (120V).

INStaLLatIoN — Universal and back (no canopy) mount available.

Conduit entry (1/2" - 14 UNC) included with universal mounting.

Cast-aluminum canopy attaches to 10-gauge steel mounting plate for top or end mounting (not required for back mounting).

Canopy mounting bracket provides 160 lbs. of mounting strength when mounted to suitable structure. Bracket will only fit a 2-gang junction box.

LIStINgS — UL listed. Listed and labeled to comply with Canadian Standards C-860 and C22.2 No. 9 (see Options). 4X option is UL listed to NEMA 4X ratings. Meets UL 924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination standards, and State of Minnesota energy-efficient legislation requiring less than 20W consumption.

WarraNty — Five-year total customer satisfaction warranty on exit, including lamp.

All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to p erform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

all-Conditions exits

LV

LeD LaMpSNeMa 4X Rating Available

eMeRGeNCY Lv_e

Catalog Number

Notes

Type

White on white w/red letter color

Black on black w/green letter color

LV S

Family Face type Faceplate/housing color Number of faces Letter color Input voltage Mounting options

LV S Stencil (blank) Black faceplate on black housing

W White on whiteWB White on blackBW Black on whiteAB Aluminum on

black1

AW Aluminum on white1

1 Single face 2 Double face2

r Red G Green1

120/277 Dual voltage1

120/347 Dual voltage3

(blank) Back mount4

uM Universal mount

(Blank) NoneF1 Fire alarm flashing interface1

X2 Primary and secondary AC inputs provided1,5,6

DL UL listed for damp locations4X UL listed for NEMA 4X1

LDC6 6V DC input for LED lamps3

LDC12/48 12V-48V DC input for LED lamps3

CSA Listed and labeled to comply with Canadian Standards

orDerINg INForMatIoN For shortest lead times, configure products using bolded options. example: LV S W 1 R 120/277

accessories: Order as separate catalog number.

ELA TPS T20 Torx tamperproof bit for T20 center-pin screw

Notes1 Not available with CSA option.2 Available with universal mount only.3 Only available with CSA option.4 Back mount standard with single face unless UM is specified. Not available on double face.5 UL listed as emergency lighting equipment.6 Must specify input voltage (120 or 277V). Not available dual voltage.

LV LED, Extreme

Key FeatureS

Unique LEDs provide extremely long life and low energy consumption.

6(15.2)

9-7/8(24.9)

3(7.6)

4-1/4(10.8)

UL and CSA approved for damp or NEMA4X wet locations (see options). Cold weather — down to -40oC.

End Mount

13-7/8(35.2)15

(38.1)

8.5(21.6)

6(15.2)

4-3/4(12.1)

4-3/8(11.1)

9-1/2(24.1)

13-7/8(35.2)

4(10.2)

8-3/4(22.2)

Back Mount

NEMA 4X Mounting Plate

Top Mount Top Mount Single-Face Double-Face

Housing or canopy mounting bracket should be attached to mounting surface using suitable fastener for type of wall material. All four mounting hole positions should be used, and anchors or screws should have a minimum pullout rating of 160 lbs. Bracket will only fit a 2-gang junction box.

Supplemental emergency Circuit

type No. of faces Nominal lamp voltage electrical watts Input amps

LDC6 1 6 1.44 .24

LDC12/48 1 12 1.9 .15

LDC12/48 1 24 1.8 .07

LDC12/48 1 32 1.8 .06

LDC12/48 1 48 1.7 .04

LDC6 2 6 2.9 .48

LDC12/48 2 12 3.1 .26

LDC12/48 2 24 3.1 .13

LDC12/48 2 32 3.3 .10

LDC12/48 2 48 3.4 .0

4-3/8(11.1)

4-3/8(11.1)

Lv_e

eMeRGeNCY: One Lithonia Way Conyers, GA 30012 Phone: 800-334-8694 Fax: 770-981-8141 www.lithonia.com © 1996-2011 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/16/11

SpeCIFICatIoNSeLeCtrICaL

primary Circuit

typerated

LeD life1Supplyvoltage

Number of lamps2

Inputwatts

Max.amps

Red 10 years 1201 2.3 .152 4.6 .30

Red 10 years 2771 2.2 .132 4.4 .26

Red 10 years 3471 1.12 .292 3.16 .29

Green 10 years 1201 1.7 .0872 2.8 .081

Green 10 years 2771 1.9 .0892 3.3 .086

Notes1 Based on continuous operation.2 Two-lamp version available with double-face only.

MouNtINgAll dimensions are in inches (centimeters).Shipping weight: 11 lbs. (5 kgs.)

FLUORESCENT RT5-1X4

Catalog Number

Notes

Type

All dimensions are inches (centimeters) unless otherwise specified.

RT5 28T5

SeriesNumber of lamps Lamp type Voltage Ballast Lamp6 Options

RT5 Recessed T5

12

28T5 28W T5 (46")

54T5HO 54W T5HO (46")1

MVOLT2 3473


GEB95 .95 ballast factor (2-lamp)

GEB95S .95 ballast factor, step dimming(2-lamp only)

S5 SIMPLY5TM system5

GEB80 .80 ballast factor1

GEB80S .80 ballast factor, step dimming1

GEB115 1.15 ballast factor (2-lamp only)

GEB115S 1.15 ballast factor (2-lamp only), step dimming

GEB90 .90 ballast factor

GEB90S .90 ballast factor, step dimming

LPM835P Premier 3500°K lamp



L835XP Premier 3500°K 28W lamp



LP835 3500°K, 54W lamp

LP830 3000°K, 54W lamp

LP841 4100°K, 54W lamp


PWS1836 6' prewire, 3/8" diameter, 18-gauge, 3-wire (n/a with GEB95S)8

PWS1846 6' prewire, 3/8" diameter, 18-gauge, wire9


CSA Listed and labeled to comply with Canadian standards

QFC_ Quick-flex cable7

BDP Ballast disconnect plug (meets codes that require in-fixture disconnect)

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: RT5 1 28T5 MVOLT GEB10PS LPM835P

Specifications

Length: 48 (121.8)

Width: 12 (30.5)

Depth: 3-1/8 (7.9)

Notes1 For T5HO applications, use GEB10PS, GEB80 or GEB80S ballasts.

2 MVOLT (120-277 volts), 50-60HZ.

3 For 347V use GEB95S or GEB10PS ballast only.

4 GEB10PS for use with one-lamp 28T5, and one- and two-lamp 54T5HO.

5 SIMPLY5 includes 13’ S5 SSC RELOC® wiring system, specify voltage unless HW (hardwire) or PWS is ordered. Two-lamp = .95 ballast factor; one-lamp = 1.0 ballast factor.

FEATURES & SPECIFICATIONSINTENDED USE — RT5™ is designed for applications that require the extremely energy efficient delivery of comfortable volumetric light from a lay-in fixture that is appealing and shallow in depth. Ideal for offices, schools, hospitals, retail and numerous other commercial applications. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.OPTICS — Delivers volumetric lighting by filling the entire volume of space with light, delivering the ideal amount of light to walls, cubicles, work surfaces and people.Luminous characteristics are carefully managed at high angles to deliver just enough intensity to deliver the volumetric effect.Regressed, two-piece refractive system obscures and softens the lamp and smoothly washes the reflector with light.Linear faceted reflector softens and distributes light into the space and minimizes the luminance ratio between the fixture and the ceiling.Mechanical cut-off across the reflector and fresnel refracton along the refractor provide high angle shielding and a quiet ceiling.Sloped endplates provide a balanced fixture to ceiling ratio while enhancing the perception of fixture depth.CONSTRUCTION — Impact modified acrylic prismatic refractor with polymer light diffusing film.Rugged, one-piece, cold-rolled steel reflector with embossed facets with polyester powder paint after fabrication.Rigid structure with ballast box and endplates with integral T-bar clips.Fixtures may be mounted end-to-end.ELECTRICAL — Highly efficient program start electronic ballasts, Class P, thermally protected, resetting, HPF, non PCB, UL Listed, CSA Certified, sound rated A. Your choice of Premium or Premium XP T5 lamp with enhanced phosphors and 85 CRI. Lamp is TCLP compliant.S5 option available for use with SIMPLY5™ Lighting Intelligence system with multi-level dimming. See SYNERGY® Lighting Controls specification sheets for more information. Ballast Disconnect provided standard where required to comply with U.S. and Canadian electrical codes.INSTALLATION — Side mounted ballast tray accessed by removing adjacent ceiling tile. Ballast tray may be removed from fixture during service.Lamp accessed by squeezing refractor to release from retention tabs.LISTING — UL Listed (standard). Optional: Canada CSA or cUL. Mexico NOM.WARRANTY — Fixture guaranteed for one year against mechanical defects in manufacture. Lamp and ballast system warranty (24 months for lamp, 60 months for ballast) by lamp and ballast manufacturer.Protected by one or more of US Patents Nos. 7,229,192; D541,467; D541,468; D544,633; D544,634; D544,992; D544,933 and additional patent pending.Note: Specifications subject to change without notice.

RT5

1’x 4’ One or Two Lamps

Premier and Premier XP T5

6 Required. All fixtures shipped with lamps installed.

7 Must specify voltage, 120 or 277.

8 For use with standard ballast.

9 For use with step dimming ballast.

10 See PS1400QD spec sheet for EL lumen output information.


RT5-1X4

FLUORESCENT: One Lithonia Way Conyers, GA 30012 Phone: 800.315.4963 Fax: 770-981-8191 www.lithonia.com ©2004-2011 Acuity Brands Lighting, Inc. All rights reserved. Rev. 1/10/11

RT5 Volumetric Recessed Lighting, 1' x 4'

*The LER (Luminaire Efficacy Rating) is the lumens per watt rating for this fixture. It is used to compare the energy efficiency of various products. This photometric report is based upon IES testing procedures, as stated in LM-41-1998. The reported lumen rating is based upon lamp manufacturer’s published lumen output for the cold spot temperature measured during lamp calibration.

RT5 2 28T5 GEB95S LPM835P, (2) FP28/835/PM/ECO lamp, 2730 lumens per lamp, s/m 1.2 (along) 1.3 (across), test no. LTL14100

LER: 69.1 lpw

RT5 28T5 GEB10PS LPM835P, (1) FP28/835/PM/ECO lamp, 2730 lumens per lamp, s/m 1.2 (along) 1.3 (across), test no. LTL13316

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

100

200

300

400

500

600

700

800

Coefficients of Utilizationpf 20%pc 80% 70% 50%pw 70%50%30% 50%30%10% 50%30%10%

10495877972676257535046

10491807062565045413835

10488746355484238343128

10189786961554945413735

10186736254474237343128

10183685749423732292624

9786756659534843403634

9783716153464137333028

9781675648423632292623

RC

R

0123456789

10

Zonal Lumen SummaryZone Lumens % Lamp % Fixture0˚ - 30˚0˚ - 40˚0˚ - 60˚0˚ - 90˚90˚ - 180˚0˚ - 180˚

672110019402375

02375

24.640.371.187.00.087.0

28.346.381.7

100.00.0

100.0

Efficiency: 87.0%

CP Summary0˚ 90

0˚5˚15˚25˚35˚45˚55˚65˚75˚85˚90

86284881474763649233118985150

862862844792723636523323106130

LER: 74.2 lpw

Specification Premium T8 Troffer

SP8 2'x4'2, 3, 4 or 6 Lamps

T8

Catalog Number

Notes Type

Sheet #: SP8-2x4 STAT-150Fluorescent

All dimensions are inches (millimeters).

Specifications

Length: 48 (1218)Width: 24 (609)Depth: 3-11/16 (94)Weight: 22 lbs (9.9 kg)

FEATURES & SPECIFICATIONSINTENDED USESpecification premium, high performance, static T8 luminaires providegeneral illumination for recessed applications; ideal for restricted plenumspaces.ATTRIBUTESDesigned exclusively for use with T8 lamps, electronic ballasts and sockets.CONSTRUCTION

Smooth hemmed sides and smooth, inward formed end flanges for safehandling. Lighter weight fixture allows safe, easy installation.Standard steel door frame has superior structural integrity with premiumextruded appearance and precision flush mitered corners. Steel door allowseasy lens replacement without frame disassembly (for lenses up to .156"thick). Powder-painted, steel latches provide easy, secure door closure.Superior mechanical light seal requires no foam gasketing. Integral T-bar clipssecure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylicshielding material 100% UV stabilized. No asbestos is used in this product.US PATENTS: 6,210,025; 6,231,213; 6,213,625; 2,288,471.FINISH

Five-stage iron-phosphate pretreatment ensures superior paint adhesion andrust resistance. Painted parts finished with highly reflective matte white enamel.OPTICAL

A12 lens features reverse apex technology for superior lamp obscurationand improved visual comfort.ELECTRICAL SYSTEMStandard ballast is electronic, thermally protected, resetting, Class P, HPF,non-PCB, UL Listed, CSA certified ballast, universal voltage and sound rated A.Luminaire is suitable for damp locations. AWM, TFN or THHN wire usedthroughout, rated for required temperatures.LISTING

Standard: UL. Optional: Canada — CSA or cUL; Mexico — NOM.WARRANTY

Guaranteed for one year against mechanical defects in manufacture.Specifications subject to change without notice.

Door frame

(blank) Flush steel, whiteFN Flush aluminum, naturalFM Flush aluminum, matte blackFW Flush aluminum, whiteRN Regressed aluminum, naturalRM Regressed aluminum, matte black

RW Regressed aluminum, white

Voltage

120277347

MVOLTOthers

available.

Series

2SP8 2' wide

Trim type

G GridF Overlapping

flanged

Lamp type

32 32W T8 (48")

2SP8

NOTE:1 MVOLT standard for 120-277V applications,

50-60 hz operation. Some options requirevoltage specified.

Options1

1/4 One 4-lamp ballast1/3 One 3-lamp ballast

GEB10IS Electronic ballast, <10% THD, instantstart

GEB10RS Electronic ballast, <10% THD, rapidstart

EL Emergency battery pack (nominal 300lumens

EL14 Emergency battery pack (nominal1400 lumens)

GLR Internal fast-blow fuseGMF Internal slow-blow fuseLST Tandem-wired fixture pairs (shared

ballasts)PWS1836 6' prewire, 3/8" dia., 18-gauge, 1 circuitPWS1846 6' prewire, 3/8" dia., 18-gauge, 2 circuits

LP735 Lamped, 700-series, 3500KLP__ Lamped; specify lamp type and color

JP Palletized and stretch-wrappedwithout individual cartons

CSA CSA CertifiedNOM NOM Certified

Diffuser type

A12 #12 pattern acrylic, reverseapex

A12125 #12 pattern acrylic, .125" thick RA125 #12 pattern acrylic, .125" thick,

reverse apexA19 #19 pattern acrylic, .156" thickA15 #15 pattern acrylic, .2" thick

PC1S 1/2" x 1/2" x 1/2" plastic cubelouver, silver

PC2S 1-1/2" x 1-1/2" x 1" plastic cubelouver, silver w/ flange

PC3S 3/4" x 3/4" x 1/2" plastic cubelouver, silver

Numberof lamps

2346

Notincluded.

For shortest lead times, configure product using standard options (shown in bold).Example: 2SP8 G 3 32 A12 MVOLT 1/3 GEB10IS

ORDERING INFORMATION

SP8 2'x4' Static T8 Troffer

DIMENSIONS

PHOTOMETRICSCalculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%.Lamp configurations shown are typical. Full photometric data on these and other configurations available upon request.

2SP8 2 32 A12*Report LTL 7525Lumens per lamp - 2850 – Lum. eff. - 85.5%S/MH (along) 1.3 (across) 1.4Coefficient of UtilizationCeiling 80% 70% 50%Wall 70% 50% 30% 70% 50% 30% 50% 30% 10%

0 102 102 102 99 99 99 95 95 951 94 90 87 92 88 85 85 82 802 86 80 74 84 78 73 75 71 683 79 71 64 77 70 64 67 62 584 73 63 56 71 62 56 60 55 505 67 57 50 66 56 49 54 48 446 62 52 44 61 51 44 49 43 397 58 47 40 57 46 40 45 39 348 54 43 36 53 42 36 41 35 319 51 39 33 49 39 33 38 32 28

10 47 36 30 46 36 30 35 29 25Zonal Lumens Summary


0-30 1541 27.0 31.60-40 2571 45.1 52.70-60 4192 73.5 86.00-90 4874 85.5 100.0

90-180 0 0 00-180 4874 85.5 100.0


0 100 100 100 97 97 97 93 93 931 92 88 85 90 86 83 83 80 782 84 78 73 82 77 72 74 70 663 78 70 63 76 68 62 66 61 574 72 62 55 70 61 55 59 54 495 66 56 49 64 55 49 53 48 436 61 51 44 60 50 43 49 43 387 57 46 39 56 46 39 44 38 348 53 42 36 52 42 35 41 35 319 50 39 32 49 38 32 38 32 28



0-30 2319 27.1 32.40-40 3833 44.8 53.60-60 6164 72.1 86.20-90 7147 83.6 100.0

90-180 0 0 00-180 7147 83.6 100.0


0 97 97 97 95 95 95 91 91 911 90 86 83 87 84 81 81 78 762 82 76 71 80 75 70 72 68 653 76 68 62 74 67 61 64 59 554 70 61 54 68 60 53 58 52 485 64 55 48 63 54 47 52 46 426 60 50 43 58 49 42 47 42 377 56 45 38 54 44 38 43 37 338 52 41 35 51 41 34 40 34 309 48 38 32 47 38 31 37 31 27



0-30 3029 26.6 32.60-40 4999 43.8 53.80-60 8017 70.3 86.30-90 9292 81.5 100.0

90-180 0 0 00-180 9292 81.5 100.0

* With reverse apex lensEnergy (Calculated in accordance with NEMA standard LE-5)

ANNUAL LAMP LAMP BALLASTLER.FL ENERGY COST** DESCRIPTION LUMENS FACTOR WATTS

77 $3.12 (2) 32W T8 2850 .90 5774 $3.24 (3) 32W T8 2850 .87 8577 $3.12 (4) 32W T8 2850 .88 107** Comparative yearly lighting energy cost per 1000 lumens

MOUNTING DATAContinuous row mounting of flanged units requires CRE and CRM trim options (seeOptions).

NOTE:1 Recommended rough-in dimensions for F-trim fixtures 24"x48". (Tolerance is +1/4"-0".)

Swing-gate range 1-3/16" to 3-15/16". Swing-gate span 23-3/8" to 26-11/16". Fixtureswing-gate points require additional 9/16" over nominal fixture height.

Sheet #: SP8-2x4

Lithonia LightingFluorescentOne Lithonia Way, Conyers, GA 30012Phone: 800-858-7763 Fax: 770-929-8789www.lithonia.com© 1999 Acuity Brands Lighting, Inc., Rev. 3/12/09

CATALOG NUMBER

AVAILABLE FIXTURES

SPECIFICATIONS

ORDERING LOGIC

S P E C I F I C A T I O N S

PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • www.peerless-lighting.com

__________ __________ __________ __________ __________ FT __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________

Type: ________________________

Project: ______________________

Use guide below to order complete fi xture runs from four feet to one-hundred feet in increments of four.

© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Peerless Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents

Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notifi cation as part of the company’s continuing product improvement program.

Pendant Mount — Modular / 8” X 2” Rectangular BRM1

BrunoIndirect T8

1 11⁄16”

8 1⁄4”

■ BRM1 - 1

1 11⁄16”

8 1⁄4”

■ BRM1 - 2

1 11⁄16”

8 1⁄4”

■ BRM1 - 3

Examples: BRM1 2 32 SPR 40FT R8 277 GEB10 DCT LP835 F1/18 SCEP — BRM1 3 32 SPR 32FT R8 277 GEB10 1SE EL DCT LP835 F1/21

ConstructionHousing is a nominal 8 1⁄4” x 1 11⁄16” rectangular

channel formed from cold-rolled steel. 5⁄8” thick

aluminum die cast end cap is standard, 4” sculpted

die cast aluminum end cap is optional.

Refl ectorsDie formed specular refl ector with 95% refl ectance.

FinishFine textured white polyester powder paint

is standard. Consult factory for special fi nish

requirements.

ElectricalSpecify 120V, 277V, or 347V. Pre-wired with

16AWG fi xture wire. For special circuiting or wire

gauge, consult factory. Plug-in electrical connectors

included. UL and C-UL listed and labeled.

Fixture Length4’ 3⁄8”, 8’ and 12’ lengths in a single section for

nominal support spacing 4’-0” and 8’-0”. For total

fi xture length, add 5⁄8” for each fl at end cap and 4”

for each sculpted end cap. Using internal joiners, 4’

and 8’ sections can be joined to form longer rows.

Consult factory for availability of 12’ length fi xture

section.

Notes:1 Must be in 4’ increments.

2 Optional.

3 EL and EC are installed in last 4’ of fi xture sections and are not available concurrently with

each other. Separate feed required for each EL or EC unless ELS/ELH is specifi ed.

4 Not available in 347 volt.

______________ ______________ ________________ ______________ ___________ FT ______________ ______________ ________________________ ______________

Fixture

BRM1

# of Lamps inCross Section

1

2

3

Lamp Type

32

Refl ector

SPR Specular

Refl ector

NominalRowLength1

MaximumSectionLength

R4R8R12

Voltage

120277347

Ballast Type

GEB10 <10% THD ELECTRONIC

ADEZ4 Advance Mark 10 dimming

ECO104 Lutron ECO-10 dimming

ADZT4 Advance Mark 7 0-10v dimming

Reference Ballast Chart on website or consult factory for other options.

# of Emergency Modules2

Blank No Emergency

1SE 1 section

2SE 2 sections

XSE X sections

______________ ______________ ________________ ______________ / ______________ ______________ _________________________________

Emergency Type2,3

Blank No Emergency or

Night Light

EL Emergency

Battery Pack

EC Emergency /

Night Light Circuit

EN Emergency

Battery Pack

with Night Light

Circuit

Switching

SCT Single

Circuit

DCT Dual Circuit

Lamp Color

L/LP No Lamp

LP730 3000K 70+ CRI

LP735 3500K 70+ CRI

LP741 4100K 70+ CRI

LP830 3000K 80+ CRI

LP835 3500K 80+ CRI

LP841 4100K 80+ CRI

Reference Lamp Chart on website or consult factory for other options.

Mounting Type /

F1 T-Bar Ceiling (Universal

Mounting Bracket)

F1A T-Bar Ceiling (UMB with

Integrated J-Box)

F2 Hard Ceiling (Horizontal

J-Box)

F3 Stem Mount

F4A IDS Clip 15⁄16” Tee

F4B IDS Clip 9⁄16” Tee

F4C IDS Clip Screw Slot

Overall Suspension

12 12” overall suspension





XX XX” overall suspension

Finish

C210 Standard White

White (fi ne-

textured low

gloss)

C110 Painted to match

Aluminum Finish

C099 Custom Color

Options

ACG Adjustable Cable Grippers

APF Alternate Power Feed

CP Chicago Plenum

DL Damp Location Label

DU Dust Cover

ELH EM Through wire w/ Separate Feed

ELS EM Through Wire w/ Single Feed

GLR Fusing (Fast blow)

GMF Fusing (Slow Blow)

NYC New York City Code

SCEP Sculptured End Cap

http://www.peerless-lighting.com/info/?pg=ProductSupport

http://www.peerless-lighting.com/info/?pg=ProductSupport

PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • www.peerless-lighting.com

P H O T O M E T R I C S

© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Peerless Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.

Type: ________________________

Project: ______________________

Pendant Mount — Modular / 8” X 2” Rectangular BRM1

BrunoIndirect T8

1-LAMP T8 wITh SPECULAR REfLECToR 2-LAMP T8 wITh SPECULAR REfLECToR

3-LAMP T8 wITh SPECULAR REfLECToR

Documents

covelight 26 - Douglas 50-percent submittal... | 1.773.247.9494 Visit focalpointlights.com for complete photometric data. july 2008 A covelight 26 features Low profile indirect luminaire