Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 1 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Common first year
If no foundation units are required:
Year Sem Units
First year engineering electives
1
1
ENG1001 Engineering design: lighter, faster, strongerfa
ENG1005 Engineering mathematics
ENG1060 Computing for engineers
Elective unit
CHM1011 Chemistry 1 or CHM1051 Chemistry 1 advanced
ENE1621 Environmental engineering
ENG1021 Spatial communication in engineering
ENG1051 Materials for energy and sustainability
MAT1830 Discrete mathematics for computer science
PHS1002 Physics for engineering
RSE1010 Natural resources engineering
ECE2041 Telecommunications
ECE2072 Digital systems
FIT2085 Introduction to computer science for engineers
MAE2405 Aircraft performance
MEC2404 Mechanics of fluids
TRC2001 Introduction to systems engineering
2
ENG1002 Engineering design: cleaner, safer, smarter
ENG1003 Engineering mobile apps
First year engineering elective unit
Elective unit
If you need to enrol in foundation physics and foundation maths:
1
1
ENG1002 Engineering design: cleaner, safer, smarter
ENG1003 Engineering mobile apps
PHS1001 Foundation physics
ENG1090 Foundation mathematics
2
ENG1001 Engineering design: lighter, faster, stronger
ENG1005 Engineering mathematics
ENG1060 Computing for engineers
First year engineering elective unit
If you need to enrol in foundation maths:
1
1
ENG1002 Engineering design: cleaner, safer, smarter
ENG1003 Engineering mobile apps
First year engineering elective unit
ENG1090 Foundation mathematics
2
ENG1001 Engineering design: lighter, faster, stronger
ENG1005 Engineering mathematics
ENG1060 Computing for engineers
Elective unit
If you need to enrol in foundation physics:
1
1
ENG1002 Engineering design: cleaner, safer, smarter
ENG1003 Engineering mobile apps
First year engineering elective unit
PHS1001 Foundation physics
2
ENG1001 Engineering design: lighter, faster, stronger
ENG1005 Engineering mathematics
ENG1060 Computing for engineers
Elective unit
Notes:
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 2 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Aerospace Engineering
Year Sem Units Aerospace engineering technical electives:
1 1
Common first year
MEC2402 Engineering 1
MEC2407 Electromechanics
TRC2001 Introduction to systems engineering
MAE3406 Aerospace Materials
MEC3416 Engineering design 2
TRC3500 Sensors and artificial perception
MAE4409 Wing design
MAE4965 Advanced aerodynamics and turbulence
MAE4980 Aircraft engines
MEC4407 Engineering design 3
MEC4418 Control systems (not offered in 2019)
MEC4428 Advanced dynamics
MEC4446 Composite structures
MEC4447 Computers in fluids and energy
MEC4459 Wind engineering
MEC5881 Engineering systems performance analysis**
MEC5882 Instrumentation, sensing and monitoring**
MEC5883 Mechanical systems design**
MEC5884 Sustainable engineering systems**
An approved engineering technical elective chosen in consultation with the course adviser
** Students must obtain an honours weighted average (HWA) of 70 per cent or above at the conclusion of level 3 and be in their final year to enrol in these units.
2
2
1 MAE2401 Aircraft structures 1
MAE2406 Orbital mechanics and space flight dynamics
ENG2005 Advanced engineering mathematics
Elective or aerospace technical elective
2
MAE2402 Thermodynamics and heat transfer
MAE2404 Aerodynamics
MAE2405 Aircraft performance
Elective or aerospace technical elective
3
1 MAE3401 Aerodynamics 2
MAE3404 Flight vehicle dynamics
MAE3456 Aerospace computational mechanics
Aerospace technical elective at level 3 or 4
2 MAE3405 Flight vehicle propulsion
MAE3408 Aerospace control
MAE3426 Computer-aided design
Aerospace technical elective at level 3 or 4
4
1 MAE4404 Aerospace practices
MAE4411 Aircraft structures 2
MEC4401 Final year project
Aerospace technical elective at level 3 or above
ENG0001 Continuous Professional Development (0 credit points)
2 MAE4410 Flight vehicle design
MAE4408 Damage tolerance and airworthiness
MEC4402 Final year project - Thesis
Aerospace technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 3 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Chemical Engineering
Year Sem Units Chemical engineering technical electives
1 1
Common first year
SCI1020 Introduction to statistical reasoning
CHE2166 Introduction to process simulation
CHE2167 Process material selection
CHM2951 Environmental chemistry - water
CHE3163 Sustainable processing 1
CHE3171 Bioprocess technology
CHE3172 Nanotechnology and materials 1 (Clayton only)
CHM3960 Environmental chemistry
ENE3608 Environmental impact assessment and management systems (Malaysia only in 2020)
ENE4042 Environmental impact and risk assessment
CHE4171 Biochemical engineering
CHE4172 Nanotechnology and materials 2
CHE4173 Sustainable processing 2
CHE5881 Advanced reaction engineering (Clayton only)*
CHE5882 Biomass and bio-refineries (Clayton only)*
CHE5883 Nanostructured membranes for separation and energy production (Clayton only)*
CHE5884 Process modelling and optimisation (Clayton only)*
CHE5885 Principles and practices for sustainable development (Malaysia only)*
ENG5002 Engineering entrepreneurship*
An approved engineering technical elective chosen in consultation with the course adviser
* Students must obtain an honours weighted average (HWA) of 70 per cent or above at the conclusion of level 3 and be in their final year to enrol in these units.
2
2
1
ENG2005 Advanced engineering mathematics
CHM1011 Chemistry 1 or CHM1051 Chemistry 1 Advanced (if not already completed at level 1)
CHE2164 Thermodynamics 1
Elective or chemical technical elective
2 CHE2162 Materials and energy balances
CHE2161 Mechanics of fluids
CHE2163 Heat and mass transfer
Elective or chemical technical elective
3
1
CHE3161 Chemistry and chemical thermodynamics
CHE3165 Separation processes
CHE3167 Transport phenomena and numerical methods
Chemical technical elective at level 3 or 4
2 CHE3162 Process control
CHE3164 Reaction engineering
CHE3166 Process design
Chemical technical elective at level 3 or 4
4
1
CHE4164 Integrated industrial project (18 points) For selected students taking a period of integrated industrial training in the first semester of their final year. This will replace the two core units below [CHE4180 and CHE4161]
Chemical technical elective at level 3 or above
ENG0001 Continuous Professional Development (0 credit points) 1
CHE4161 Engineer in society
CHE4180 Chemical engineering project (12 points) Chemical technical elective at level 3 or above
2 CHE4162 Particle technology
CHE4170 Design project (12 points) Chemical technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
Depending on placement location, students who choose CHE4164 may have to overload a semester or extend an additional semester in order to complete their course requirement.
Students should not overload in the semester of undertaking CHE4170.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
OR
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 4 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Civil Engineering
Year Sem Units Civil engineering technical electives
1
1
Common first year
ENG1021 Spatial communication in engineering
ENE1621 Environmental engineering
RSE1010 Natural resources engineering
CIV2283 Civil engineering construction
ENE2503 Materials properties and recycling
RSE2010 Fixed plant engineering and project management
CIV4283 Transport planning
CIV4284 Traffic systems
CIV4211 Project B
CIV4234 Advanced structural analysis
CIV4235 Advanced structural design
CIV4248 Ground hazards engineering
CIV4249 Foundation engineering
CIV4261 Integrated urban water management
CIV4268 Water resources management
RSE4111 Numerical modelling (not offered in 2019)
An approved engineering technical elective chosen in consultation with the course adviser
2
2
1
CIV2206 Mechanics of solids
*This unit title changes in 2019 to Structural mechanics
CIV2225 Design of steel and timber structures
CIV2263 Water systems Elective or civil technical elective
2
ENG2005 Advanced engineering mathematics
CIV2242 Geomechanics 1
CIV2282 Transport and traffic engineering
Elective or civil technical elective
3
1
CIV3248 Groundwater and environmental geomechanics
CIV3221 Building structures and technology
CIV3285 Engineering hydrology
Civil technical elective at level 4
2 CIV3204 Engineering investigation
CIV3284 Design of concrete and masonry structures
CIV3247 Geomechanics 2
Civil technical elective at level 4
4
1 CIV4210 Project A CIV4286 Project management for civil engineers
CIV4280 Bridge design and assessment
Civil technical elective at level 4
ENG0001 Continuous Professional Development (0 credit points)
2
CIV4212 Civil and environmental engineering practice
CIV4287 Road engineering
CIV4288 Water treatment
Civil technical elective at level 4
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 5 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Electrical and Computer Systems Engineering
Year Sem Units Electrical engineering technical electives
1 1 Common first year
ENG2801 Leadership and innovation (Malaysia
only) TRC2001 Introduction to systems
engineering
ECE3093 Optimisation estimation and
numerical methods
TRC3500 Sensors and artificial perception
ECE4024 Wireless communications
ECE4032 Advanced control
ECE4033 Industrial instrumentation and
measurement technologies (Malaysia only)
ECE4042 Communications theory
ECE4043 Optical communications
ECE4044 Telecommunications protocols
ECE4045 Network performance
ECE4053 Electrical energy - generation and
supply (Unit title change to “Power system analysis”
from 2020)
ECE4055 Electrical energy - power electronic
applications (Clayton only)
ECE4058 Electrical energy - high voltage
engineering (Clayton only)
ECE4063 Large scale digital design
ECE4064 Electronic test technology (Malaysia
only) ECE4074 Advanced computer architecture
ECE4076 Computer vision
ECE4077 Advanced computing techniques
ECE4078 Intelligent robotics (Clayton only)
ECE4081 Medical instrumentation
ECE4086 Medical imaging technology
ECE4087 Medical technology innovation
ECE4122 Advanced electromagnetics ECE4146 Multimedia technologies (Clayton only)
ECE4179 Neural networks and deep learning
ECE4808 Organic electronics and micro devices (Malaysia only) ECE4809 Solid state lighting (Malaysia only)
ECE4810 Internet of Things: Communication, data
and security (Malaysia only)
ENG4700 Engineering technology for biomedical
imaging and sensing (Clayton only)
TRC4901 Artificial intelligence for engineers (Malaysia only)
ECE5881 Real-time system design (Clayton only)**
ECE5882 Advanced electronics design (Clayton
only)**
ECE5883 Advanced signal processing (Clayton
only)**
ECE5884 Wireless communications (Clayton only)**
ECE5886 Smart grids**
An approved engineering technical elective chosen in consultation with the course adviser
** Students must obtain an honours weighted average (HWA) of 70 per cent or above at the conclusion of level 3 and be in their final year to enrol in these units.
2
2
1 ECE2071 Computer organisation and programming
ECE2131 Electrical circuits
ENG2005 Advanced engineering mathematics
Elective or ECSE technical elective
2 ECE2072 Digital systems (if not already completed at level 1)
ECE2111 Signals and systems
ECE2191 Probability models in engineering
Elective or ECSE technical elective
3
1 ECE3073 Computer systems
ECE3141 Information and networks
ECE3161 Analogue electronics
ECSE technical elective at level 3 or 4
2 ECE3051 Electrical energy systems* *This unit is taught in Semester 1 from 2020
ECE3091 Engineering design
ECE3121 Engineering electromagnetics
ECSE technical elective at level 3 or 4
4
1 ECE4094 Project A
ECE4099 Professional practice
ECSE technical elective at level 4
ECSE technical elective at level 3 or above
ENG0001 Continuous Professional Development (0 credit points)
2 ECE4095 Project B
ECE4132 Control system design
ECSE technical elective at level 4
ECSE technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 6 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Environmental Engineering
Year Sem Units Environmental engineering technical electives
1 1 Common first year
General:
ATS2545 Environmental hydrology
ATS2548 Environmental policy and management
BIO2040 Conversation biology
CIV3203 Civil engineering construction
CIV3204 Engineering investigation
CIV4211 Project B
MTE4593 Materials and sustainability
Geomechanics:
CIV2242 Geomechanics 1
CIV3204 Engineering investigation
CIV3247 Geomechanics 2
CIV4248 Ground hazards engineering
CIV4249 Foundation engineering
Sustainable processing:
CHM1011 Chemistry 1
CHE3161 Chemistry and chemical thermodynamics
CHE3163 Sustainable processing 1
CHE3165 Separation processes
CHE3166 Process design
CIV4210 Project A
Transport:
CIV2282 Transport and traffic engineering
CIV3204 Engineering investigation
CIV4287 Road engineering
CIV4283 Transport planning
CIV4284 Traffic systems
Water:
ATS2545 Environmental hydrology
BIO2040 Conservation biology
CIV3204 Engineering investigation
CIV4261 Integrated urban water management
CIV4268 Water resources management
CIV4288 Water treatment
An approved engineering technical elective chosen in consultation with the course adviser
2
2
1 ENE2021 Energy and the environment
CHE2164 Thermodynamics 1
CIV2263 Water systems
Elective or environmental technical elective
2 CHE2162 Material and energy balances
ENG2005 Advanced engineering mathematics
ENE2503 Materials properties and recycling
Elective or environmental technical elective
3
1 CIV3248 Groundwater and environmental geomechanics
CIV3285 Engineering hydrology
ENE3031 Building sustainability
Environmental technical elective at level 3 or 4
2 ENE3606 The air environment
ENE3032 Fate and transport of contaminants
Environmental engineering technical elective at level 4
Environmental technical elective at level 3 or 4
4
1 BTX3100 - Sustainability regulation for business
CIV4286 Project management for civil engineers
ENE4042 Environmental impact and risk assessment
Environmental technical elective at level 3 or 4
ENG0001 Continuous Professional Development (0 credit points)
2 ENE4041 Soil remediation and solid waste management (offered in 2021)
CIV4212 Civil and environmental engineering practice
CIV4210 Project A Environmental technical elective at level 3 or 4
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
The Sustainable processing stream is not available in a double degree as it requires extra prerequisites in the elective space.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 7 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Materials Engineering
Year Sem Units Materials engineering technical electives
1 1
Common first year
MTE2548 Biomaterials 1
MTE3544 Management and practice in materials engineering
ENG4700 Engineering technology for biomedical imaging and sensing
MTE4590 Modelling of materials
MTE4592 Advanced ceramics and applications
MTE4593 Materials and sustainability
MTE4594 Engineering alloy design, processing and selection
MTE4595 Corrosion mechanisms and protection methods
MTE4596 Biomaterials 2
MTE4597 Engineering with nanomaterials
MTE4598 Electron microscopy
MTE5881 Applied crystallography in advanced materials characterisation*
MTE5882 Advanced polymeric materials*
MTE5883 Environmental durability and protection of metals and engineering materials*
MTE5884 Materials for energy technologies*
MTE5885 Biomaterials and biomechanics*
MTE5886 Additive manufacturing of metallic materials*
MTE5887 Additive manufacturing of polymeric and functional materials*
An approved engineering technical elective chosen in consultation with the course adviser
*Students must obtain an honours weighted average (HWA) of 70 per cent or above at the conclusion of level 3 and be in their final year to enrol in these units.
2
2
1 MTE2544 Functional materials
MTE2541 Crystal structures, thermodynamics and phase equilibria
MTE2546 Mechanics of materials * Unit replaced with CIV2206 in 2020 (only)
Elective or materials technical elective
2 ENG2005 Advanced engineering mathematics
MTE2542 Microstructural development
MTE2545 Polymers and ceramics 1
Elective or materials technical elective
3
1 MTE3541 Materials durability
MTE3543 Microstructure to applications: The mechanics of materials
MTE3542 Microstructural design in structural materials
Materials technical elective at level 3 or 4
2 MTE3546 Polymers and ceramics 2
MTE3545 Functional materials and devices
MTE3547 Materials characterisation and modelling
Materials technical elective at level 3 or 4
4
1 MTE4525 Project 1 MTE4571 Materials engineering design and practice
MTE4572 Polymer and composite processing and engineering
Materials technical elective at level 3 or above
ENG0001 Continuous Professional Development (0 credit points)
2 MTE4526 Project 2 MTE4573 Processing and engineering of metals and ceramics
Materials engineering elective
Materials technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 8 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Mechanical Engineering
Year Sem Units
Mechanical engineering technical electives
1 1
Common first year
Clayton only MAE2405 Aircraft performance ENG4700 Engineering technology for biomedical imaging and sensing MEC4425 Micro/nano solid and fluid mechanics MEC4428 Advanced dynamics MEC4446 Composite structures MEC4447 Computers in fluids and energy MEC4456 Robotics MEC4459 Wind engineering MEC5881 Engineering systems performance analysis* MEC5882 Instrumentation, sensing and monitoring* MEC5883 Mechanical systems design* MEC5884 Sustainable engineering systems* MEC5888 Renewable energy systems*
Clayton and Malaysia MEC2407 Electromechanics TRC2001 Introduction to systems engineering MEC3458 Experimental project MEC3459 Materials selection for engineering design TRC3500 Sensors and artificial perception MEC4418 Control systems (not offered in
2019)
MEC4444 Industrial noise and control TRC4800 Robotics MEC5885 Energy conservation and management*
Malaysia only ECE2131 Electrical circuits ENG2801 Leadership and innovation MEC4416 Momentum, energy and mass transport in engineering systems MEC4417 Refrigeration and air-conditioning MEC4801 Non-destructive testing and inspection MEC4802 Sustainable engineering and design with nanomaterials (not offered in
2019) MEC4804 Clean energy materials TRC4901 Artificial intelligence for engineers MEC5886 Sustainable energy technologies* MEC5887 Environmental and air pollution control*
An approved engineering technical elective chosen in consultation with the course adviser
*Students must obtain an honours weighted average (HWA) of 70 per cent or above at the conclusion of level 3 and be in their final year to enrol in these units.
2
2
1 MEC2403 Mechanics of materials
MEC2401 Dynamics 1 MEC2402 Engineering design 1
Elective or mechanical technical elective
2 ENG2005 Advanced engineering mathematics
MEC2404 Mechanics of fluids
MEC2405 Thermodynamics
Elective or mechanical technical elective
3
1 MEC3455 Solid mechanics
MEC3451 Fluid mechanics 2
MEC3456 Engineering computational mechanics
Mechanical technical elective at level 3 or 4
2 MEC3453 Dynamics 2 MEC3416 Engineering design 2
MEC3457 Systems and control
Mechanical technical elective at level 3 or 4
4
1 MEC4401 Final year project
MEC4404 Professional practice
MEC4408 Thermodynamics and heat transfer
Mechanical technical elective at level 3 or above
ENG0001 Continuous Professional Development (0 credit points)
2 MEC4402 Final year project – Thesis
MEC4407 Engineering design 3
MEC4426 Computer-aided design
Mechanical technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 9 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Mechatronics Engineering
Year Sem Units Mechatronics engineering technical electives
1 1 Common first year
Clayton only MTE3545 Functional materials and devices ECE4045 Network performance ECE4063 Large scale digital design ECE4078 Intelligent robotics ECE4081 Medical instrumentation ECE4055 Electrical energy - power electronics applications ENG4700 Engineering technology for biomedical imaging and sensing ECE5881 Real time system design* MEC5881 Engineering systems performance analysis* MEC5882 Instrumentation, sensing and monitoring* MEC5883 Mechanical systems design* MEC5884 Sustainable engineering systems* MEC5888 Renewable energy systems* Malaysia only ECE4032 Advanced control MEC4416 Momentum, energy and mass transport in engineering systems MEC4417 Refrigeration and air-conditioning MEC4801 Non-destructive testing and inspection MEC4802 Sustainable engineering and design with nanomaterials (not offered in 2019) TRC4901 Artificial intelligence for engineers MEC5886 Sustainable energy technologies*
Clayton and Malaysia ECE2072 Digital systems
ECE2111 Signals and systems
MAE2405 Aircraft performance
MEC2407 Electromechanics ECE3051 Electrical energy systems
ECE3073 Computer systems
MEC3416 Engineering design 2
MEC3459 Materials selection for engineering
design
ECE4076 Computer vision
ECE4146 Multimedia technologies
MEC4418 Control systems(not offered in 2019)
MEC4425 Micro/nano solid and fluid mechanics
MEC4426 Computer-aided design
MEC4428 Advanced dynamics
MEC4444 Industrial noise and control
MEC4446 Composite structures
ECE5886 Smart grids*
MEC5885 Energy efficiency and sustainability
engineering*
An approved engineering technical elective chosen in consultation with the course adviser
*Students must obtain an honours weighted average (HWA) of 70 per cent or above at the conclusion of level 3 and be in their final year to enrol in these units.
2
2
1 ECE2131 Electrical circuits
MEC2402 Engineering design 1
ECE2071 Computer organisation and programming
Elective or mechatronics technical elective
2 ENG2005 Advanced engineering mathematics
TRC2201 Mechanics TRC2001 Intro to systems engineering
Elective or mechatronics technical elective
3
1 ECE3161 Analogue electronics
TRC3200 Dynamical systems
TRC3500 Sensors and artificial perception
Mechatronics technical elective at level 3 or 4
2 TRC4802 Thermo-fluids and power systems
TRC3000 Mechatronics project 2
TRC3600 Modelling and control
Mechatronics technical elective at level 3 or 4
4
1 TRC4000 Mechatronics final year project 1
TRC4800 Robotics ECE3141 Information and networks
Mechatronics technical elective at level 3 or above
ENG0001 Continuous Professional Development (0 credit points)
2 TRC4001 Mechatronics final year project 2
TRC4902 Mechatronics and manufacturing
TRC4002 Professional practice
Mechatronics technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 10 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Resources Engineering – Mining stream
Year Sem Units Resources engineering technical electives
- Mining
1
1
Common first year
Mining
CHE2163 Heat and mass transfer EAE2522 Sediments and basins MEC2405 Thermodynamics ENE2021 Energy and the environment ATS2548 Environmental policy and management CIV3204 Engineering investigation CIV3247 Geomechanics 2 CIV3248 Groundwater and environmental geomechanics CHE3163 Sustainable processing 1 CIV4248 Ground hazards engineering CIV4268 Water resources management CIV4288 Water treatment CIV4249 Foundation engineering MTE4593 Materials and sustainability RSE4111 Numerical modelling (not offered in 2020)
An approved engineering technical elective chosen in consultation with the course adviser
2
2
1
CIV2206 Structural mechanics CIV2263 Water systems EAE2511 Deep earth processes Elective or Resources technical elective
2
CIV2242 Geomechanics 1 RSE2010 Fixed plant engineering and project management
ENG2005 Advanced engineering mathematics
Elective or Resources technical elective
3
1
RSE3020 Resource estimation RSE3060 Blasting and fragmentation
ENE4042 Environmental impact assessment and management systems
Resources stream technical elective at level 3 or 4
2
RSE3010 Mine geotechnical engineering
RSE3030 Mine ventilation RSE3040 Mining systems Resources stream technical elective at level 3 or 4
4
1
CIV4210 Project A RSE4010 Mine planning and scheduling
RSE4120 Instrumentation, automation and asset management
Resources stream technical elective at level 3 or 4
ENG0001 Continuous Professional Development (0 credit points)
2
CIV4211 Project B RSE4020 Mine design and feasibility project
RSE4040 Mineral processing Resources stream technical elective at level 3 or 4
This course map is a guide and subject to updates. Notes:
The Resources Engineering specialisation is not offered in a double degree course.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information, refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 11 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Resources Engineering – Renewable energy stream
Year Sem Units Resources engineering technical electives
– Renewable energy
1
1
Common first year
Renewable energy
CHE2163 Heat and mass transfer EAE2522 Sediments and basins ENE2021 Energy and the environment MEC2405 Thermodynamics ATS2548 Environmental policy and management CIV3204 Engineering investigation CIV3247 Geomechanics 2 CIV3248 Groundwater and environmental geomechanics ENE3031 Building sustainability ENE3032 Fate and transport of contaminants ENE3606 The air environment CIV4248 Ground hazards engineering CIV4268 Water resources management CIV4288 Water treatment ENE4607 Environmental risk assessment (not offered in 2020) RSE4111 Numerical modelling (not offered in 2020)
An approved engineering technical elective chosen in consultation with the course adviser
2
2
1
CIV2206 Structural mechanics CIV2263 Water systems EAE2511 Deep earth processes Elective or Resources technical elective
2
CIV2242 Geomechanics 1 RSE2010 Fixed plant engineering and project management
ENG2005 Advanced engineering mathematics
Elective or Resources technical elective
3
1
ECE2131 Electrical circuits RSE3141 Solar energy ENE4042 Environmental impact assessment and management systems
Resources stream technical elective at level 3 or 4
2
RSE3241 Hydropower
RSE3242 Geothermal energy RSE3243 Bioenergy Resources stream technical elective at level 3 or 4
4
1
CIV4210
Project A
RSE4050 Energy systems and design
ECE3051 Electrical energy systems
Resources stream technical elective at level 3 or 4
ENG0001 Continuous Professional Development (0 credit points)
2
CIV4211
Project B
ECE4053 Power system analysis MEC4459 Wind engineering Resources stream technical elective at level 3 or 4
This course map is a guide and subject to updates. Notes:
The Resources Engineering specialisation is not offered in a double degree course.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information, refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 12 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Software Engineering Year Sem Units Software engineering technical electives
1
1
Common first year
FIT3003 Business intelligence and data
warehousing
FIT3031 Information and network security
FIT3080 Intelligent systems
FIT3081 Image processing
FIT3088 Computer graphics
FIT3094 Artificial life, artificial intelligence and
virtual environments
FIT3134 IT-based entrepreneurship
FIT3138 Real time enterprise systems
FIT3139 Computational science
FIT3142 Distributed computing
FIT3143 Parallel computing
FIT3146 Emergent technologies and interfaces
FIT3152 Data analytics
FIT3154 Advanced data analysis
FIT3155 Advanced data structures and
algorithms
FIT3157 Advanced web design
FIT3168 IT forensics
FIT3169 Immersive environments
FIT3173 Software security
FIT3175 Usability
FIT3176 Advanced database design
FIT3178 Advanced mobile applications
FIT3179 Data visualisation
FIT4005 Research methods in information technology
FIT4009 Advanced topics in intelligent systems FIT4010 Advanced topics in algorithms and discrete structures
FIT4012 Advanced topics in computational science
FIT5003 Software security
FIT5032 Internet application development
FIT5037 Network security
FIT5042 Enterprise application development on the web
FIT5046 Mobile and distributed systems
FIT5083 Network infrastructure
FIT5133 Enterprise architecture and management
FIT5137 Database analysis and processing
FIT5138 Advanced software engineering
FIT5139 Advanced distributed and parallel systems
FIT5140 Advanced mobile systems
FIT5142 Advanced data mining
FIT5145 Introduction to data science
FIT5148 Distributed and big data processing
FIT5163 Information and computer security
FIT5166 Information retrieval systems
An approved engineering technical elective chosen in consultation with the course adviser
2
2
1 FIT2085 Introduction to computer science for engineers
MAT1830 Discrete mathematics for computer science
FIT2099 Object-oriented design and implementation
Elective or software engineering technical elective
2 FIT2101 Software engineering process and management
FIT2004 Algorithms and data structures
FIT2107 Software quality and testing
Elective or software engineering technical elective
3
1 FIT3159 Computer architecture
FIT3077 Software engineering: Architecture and design FIT3170 Software
engineering practice (12 points)
Software engineering technical elective at level 3 or 4
2 FIT2100 Operating systems
FIT3171 Databases Software engineering technical elective at level 3 or 4
4
1 FIT4002 Software engineering industry experience studio project (12 points)
FIT4165 Computer networks
Software engineering technical elective at level 4 or above
Software engineering technical elective at level 3 or 4
ENG0001 Continuous Professional Development (0 credit points)
2 FIT4003 Software engineering research project (12 points)
Software engineering technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
Students in the Industry Based Learning placement program will have a different progression map, with their placement in Semester 2 of third year, and will need to overload in one semester or complete a summer semester unit.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.
Course progression map for 2018 commencing students This progression map provides advice on the suitable sequencing of units and guidance on how to plan unit enrolment for each semester of study. It does not substitute for the list of required units as described in the course requirements' section of the Handbook. Update version: 20 December 2019
Page 13 of 13
Source: Monash University 2018 Handbook – CRICOS Provider Number: 00008C While the information provided herein was correct at the time of viewing and/or printing, Monash University reserves the right to alter procedures, fees and regulations should the need arise. Students should carefully read all official correspondence, other sources of information for students and the official university noticeboards to be aware of changes to the information contained herein. The inclusion in a publication of details of a course in no way creates an obligation on the part of the university to teach it in any given year, or to teach it in the manner described. The university reserves the right to discontinue or vary courses at any time without notice. Students should always check with the relevant faculty officers when planning their courses. Some courses and units are described which may alter or may not be offered due to insufficient enrolments or changes to teaching personnel.
E3001 Bachelor of Engineering (Honours) Specialisation – Software Engineering – Industry Based Learning
Year Sem Units Software engineering technical electives
1 1
Common first year
FIT3003 Business intelligence and data
warehousing
FIT3031 Information and network security
FIT3080 Intelligent systems
FIT3081 Image processing
FIT3088 Computer graphics
FIT3094 Artificial life, artificial intelligence
and virtual environments
FIT3134 IT-based entrepreneurship
FIT3138 Real time enterprise systems
FIT3139 Computational science
FIT3142 Distributed computing
FIT3143 Parallel computing
FIT3146 Emergent technologies and
interfaces
FIT3152 Data analytics
FIT3154 Advanced data analysis
FIT3155 Advanced data structures and
algorithms
FIT3157 Advanced web design
FIT3168 IT forensics
FIT3169 Immersive environments
FIT3173 Software security
FIT3175 Usability
FIT3176 Advanced database design
FIT3178 Advanced mobile applications
FIT3179 Data visualisation
FIT4005 Research methods in information technology
FIT4009 Advanced topics in intelligent systems FIT4010 Advanced topics in algorithms and discrete structures
FIT4012 Advanced topics in computational science
FIT5003 Software security
FIT5032 Internet application development
FIT5037 Network security
FIT5042 Enterprise application development on the web
FIT5046 Mobile and distributed systems
FIT5083 Network infrastructure
FIT5133 Enterprise architecture and management
FIT5137 Database analysis and processing
FIT5138 Advanced software engineering
FIT5139 Advanced distributed and parallel systems
FIT5140 Advanced mobile systems
FIT5142 Advanced data mining
FIT5145 Introduction to data science
FIT5148 Distributed and big data processing
FIT5163 Information and computer security
FIT5166 Information retrieval systems
An approved engineering technical elective chosen in consultation with the course adviser
2
2
1 FIT2085 Introduction to computer science for engineers
MAT1830 Discrete mathematics for computer science
FIT2099 Object-oriented design and implementation
Elective or software engineering technical elective
2 FIT2101 Software engineering process and management
FIT2004 Algorithms and data structures
FIT2107 Software quality and testing
FIT2100 Operating systems
3
1 FIT3159 Computer architecture
FIT3077 Software engineering: Architecture and design
FIT3171 Databases Software engineering technical elective at level 3 or 4
Elective or Software engineering technical elective
2 FIT4042 Industry based learning (18 points)
4
1
FIT3170 Software engineering practice (12 points)
FIT4165 Computer networks
Software engineering technical elective at level 3 or 4
Software engineering technical elective at level 3 or 4
ENG0001 Continuous Professional Development (0 credit points)
2 FIT4003 Software engineering research project (12 points)
Software engineering technical elective at level 3 or above
Notes:
The placement of units may be rearranged to support sequencing for double degree courses but care should be taken to ensure sequenced units are maintained in sequence.
All students are required to complete at least 420 hours of Continuous Professional Development (CPD) in order to graduate. For further information refer to the CPD webpage.
For enrolment advice, please refer to the Course Advisers webpage. This course map is recommended as a guide only and subject to updates.