Embed Size (px)
Citation preview
Counters, Process displays, Timers, Tachometers, Format alignmentProduct overview – Edition 2013
Baumer GroupInternational SalesP.O. Box · Hummelstrasse 17 · CH-8501 FrauenfeldPhone +41 52 728 1122 · Fax +41 52 728 [email protected] · www.baumer.com
Our entire portfolio
Presence detection Inductive sensors Photoelectric sensors Ultrasonic sensors Capacitive sensors Magnetic sensors Precision mechanical switches
Distance measurement Inductive sensors Photoelectric sensors Ultrasonic sensors Linear encoders without bearings Cable-pull encoders
Angle measurement / rotary encoders Absolute encoders Incremental encoders HeavyDuty encoders Bearingless encoders Tachogenerators and resolvers Format alignment Speed switches Encoder combinations Inclination sensors
Identifi cation / image pr
Process instrumentation
Temper Pressur
Force/strain sensors
ssago, MI
arszawa
SwedenBaumer A/SBox 134SE-561 22 HuskvarnaPhone +46 (0)36 13 94 [email protected]
SwitzerlandBaumer Electric AGP.O. Box, Hummelstrasse 17CH-8501 FrauenfeldPhone +41 (0)52 728 [email protected]
United KingdomBaumer Ltd.33/36 Shrivenham HundredGB-Watchfield, Swindon, SN6 8TZPhone +44 (0)1793 783 [email protected]
ates
eet, Unit C-6T 06489
VenezuelaBaumer BAVE, SAAv. Principal, Urb. LebrunLocal 41-A, Petare, Ap.70817VE-1070 CaracasPhone +58 (0)212 256 [email protected]
Welcometo the world of industrial counter and process technology
Counting quantities, programming targets, cutting to length, packaging and dosing operations
Acquisition of operation hours, product lifetime and maintenance cycles
Time-controlled starting and ending of manufacturing processes
Displaying speed, frequencies, fl ow or positions, automa-ted shaft alignment, indication and monitoring physical or electrical values
The displays, counters and data processing solutions presented in this brochure are capable of all these simple applications in factory automation.
More detailed information on our broad portfolio and latest Baumer product innovations is available on our website:
www.baumer.com
Introduction Motion Control
A wide selection among innovative products
Application examples
2
Counters Totalizers / Position displays
Preset counters
8
Time and hour counters Totalizers
Preset counters
12
Format alignment Spindle position displays
Components
14
Tachometers Tachometers
Tachometers with limit
16
Process displays Process
Temperature
Electric values
For strain gauge (DMS)
18
Large displays Numeric, process, counter
Alphanumeric
24
Mechanical counters Revolution counters
Meter counters
Handheld piece counters
Measuring wheels
26
Content
2 www.baumer.com
Baumer
Industries
Drive engineering
Elevator technology
Automotive
Chemical, petrochemical
Automation
Energy, mining
Material handling
Food & Beverage
Graphical machinery
Semiconductor
Handling and robotics
Woodworking
Warehouse technology
Plastics
Medical
Pharmaceutical, biotechnology
Injection molding, die- cast
Textile
Packaging
Tooling
Wind power
3www.baumer.com
Motion Control
Baumer is setting new benchmarks
We endeavor to always being one step ahead and setting innovative benchmarks.
Committed to quality ever since, we offer practice-proven solutions and evolved products
developed to the smallest detail of cutting-edge technologies which refl ect our competen-
cies, reliability and precision. Our strong presence on the market and the close, on-site
collaboration with our customers ensure the perfect individual solution. Optimized pro-
cess design and control is the basis for our consistently high quality standards, reliability,
fl exibility and effi ciency. Striving to continually improve, we merge the principles of lean
management with methodologies of fl awless and effi cient process fl ow. Our commitment
High degree of innovation
Broad product and performance portfolio
Profound application competence
Close collaboration and partnership with our customers
Comprehensive expert advice – outstanding service across the globe
4 www.baumer.com
A wide selection among innovative products and solutions for process data display and management
Customer-specifi c solutions
There will be no product portfolio large enough to offer the optimum solution for
every application. Quite often, some requirements lie in a completely new direction
which any conventional or standard product won’t meet to the desired extent. That’s
why our engineers work closely together with our customers. Searching for the
perfect solution for special requirements will bring up practice-oriented, customer-
exclusive product variants – from mere design modifi cations to completely new
developments.
Our innovative solution will ensure your competitive edge.
We should be glad to help you!
5www.baumer.com
Motion Control
www.baumer.com
Totalizers and preset counters
Time meters and hour meters
Timers
Tachometers
Position displays
Spindle position displays
Process displays
Large displays
Industry and product competencies
Baumer products are robust, reliable and approved by renowned manufacturers
in diverse industries such as automotive, tooling, packaging, material handling or
textile. To ensure utter satisfaction of our customers, we attach greatest impor-
tance to competent experts and high-quality products. Our sales team will gladly
support you in elaborating on your projects. Thanks to our expertise you can be
sure to be provided with the optimum solution for your application.
Our experienced product engineers offer you sustaining technical support during
system installation and product implementation.
6 www.baumer.com
Cutting to length
Controller NE212 utilized in conjunction with incremental encoder
and measuring wheel will acquire the length of the material and
output a cutting command once the programmed length is comple-
ted. The following parameters are programmable:
Length measurement and output of cutting command
Counting the quantity with preset of desired target per selected
measuring unit (batch counter)
Total of quantity already produced
Display of machine operating time
Dosing operations
NE216 is a compact and cost-effi cient controller particularly suited
for dosing applications. Yet integrating all the necessary functiona-
lities, it is a standalone product and does not require any further
external components.
Functions supported:
Preset 1 as precontact, preset 2 as final contact
„Start“ and „Stop“ inputs for dosing cycles
Scaling factor
Totalizer (8 digits) to display the total volume.
Edge offset monitoring
Machining of sheet metal, fi lms or wood boards requires the work
piece exactly in the center of the conveyor belt.
Two photoelectric line sensors suffi ce for edge detection. PCD45 is
calculating the edge offset based on both measured values provided
and via the analog outputs will perform the necessary adjustments
at the positioning drives to ensure precise material infeed.
Application Examples
7www.baumer.com
Format alignments
multicon and multiconDrive are the names behind two cost-effi cient
systems for eased shaft positioning during machine setup to support
the editing engineer in the alignment operation:
Indication of actual value and target
Manual or automated shaft alignment
As stand-alone system or linked to PLC via Profibus, CANopen or
DeviceNet gateway
Administration and memory of up to 100 profiles and max. 32
spindles
Distance and tolerance window monitoring
When unrolling fi lms, sheet metal or panels of fabric any emerging
tension forces must be compensated prior to material processing.
Photoelectric, laser or ultrasonic sensors monitor material transport
and provide PA418 display with the measured values. The admis-
sible tolerances are administered by outputs P1 and P2. Where
required, an additional analog value may be transferred to the
process control system.
Large displays
Outstanding contrast properties and large characters of 57 mm in
height allow for optimal readability even from remote. The broad
portfolio comprises products for any signal type and will provide the
optimally matching solution for any application:
Manufacturing or production-related instructions
Servicing and maintenance information
Safety instructions
Visitor reception and information
Process data
Application Examples
8 www.baumer.com
Product name F 524 ISI30 ISI31 ISI32 ISI33 N 208 N 214 NA214
Features -Electromechanic -Adding -Adding/subtractingA, Up/Down or A-B
-Adding or subtractingA and Up/Down
-Position display-2 channels A 90° B
-LED display, red-Bidirectional
-Large LED display, red-Bidirectional
-Compatible to encoder, linear measuring bar or any other absolute SSI system
-Master or slave mode
Display 6- or 8-digit, 4.5 mm 8-digit, LCD, 8 mm, backlit or non-backlit
8-digit, LCD, 8 mm, backlit or non-backlit
8-digit, LCD, 8 mm, backlit or non-backlit
8-digit, LCD, 8 mm, backlit or non-backlit
6-digit + negative signLED red, 8 mm
6-digit + negative signLED red, 14 mm
8-digit + negative signLCD, 10 and 5 mm, backlit
Count input Voltage pulse 24 VDC, 24, 48, 115 or 230 VAC
Potential-free contact, NPN, PNP or voltage pulse 10...260 VAC/VDC
NPN, PNP or voltage pulse 10...260 VAC/VDC
Voltage pulse 10...260 VAC/VDC
NPN counting frequency 3 kHzPNP Counting frequency 7 kHz
NPN- or PNP-compatible 1 or 2 channels A and Up/Down, A-B, A+B or A 90° B for encoders
NPN- or PNP-compatible 1 or 2 channels A and Up/Down, A-B, A+B or A 90° B for encoders
SSI signals up to 31 bits, gray or binary code
Reset Manual by key or no reset Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
-
Analog output - - - - - - - 0...10 V and -10....+10 V
Interfaces - - - - - - RS485, RS422 or RS232 RS485
Voltage supply - Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
12...24 VDC 24/48 VAC ±10% (50/60 Hz)115/230 VAC ±10% (50/60 Hz)24 VDC ±10%
85...265 VAC (50/60 Hz)24 VDC ±10 %
Dimensions W x H 53 x 28 mm DIN 48 x 24 mm DIN 48 x 24 mm DIN 48 x 24 mm DIN 48 x 24 mm 53 x 28 mm DIN 96 x 48 mm DIN 96 x 48 mm
Totalizers / Position displays
9www.baumer.com
Product name F 524 ISI30 ISI31 ISI32 ISI33 N 208 N 214 NA214
Features -Electromechanic -Adding -Adding/subtractingA, Up/Down or A-B
-Adding or subtractingA and Up/Down
-Position display -2 channels A 90° B
-LED display, red -Bidirectional
-Large LED display, red -Bidirectional
-Compatible to encoder, linear measuring bar or any other absolute SSI system -Master or slave mode
Display 6- or 8-digit, 4.5 mm 8-digit, LCD, 8 mm, backlit or non-backlit
8-digit, LCD, 8 mm, backlit or non-backlit
8-digit, LCD, 8 mm, backlit or non-backlit
8-digit, LCD, 8 mm, backlit or non-backlit
6-digit + negative signLED red, 8 mm
6-digit + negative signLED red, 14 mm
8-digit + negative signLCD, 10 and 5 mm, backlit
Count input Voltage pulse 24 VDC, 24, 48, 115 or 230 VAC
Potential-free contact, NPN, PNP or voltage pulse 10...260 VAC/VDC
NPN, PNP or voltage pulse 10...260 VAC/VDC
Voltage pulse 10...260 VAC/VDC
NPN counting frequency 3 kHzPNP Counting frequency 7 kHz
NPN- or PNP-compatible 1 or 2 channels A and Up/Down, A-B, A+B or A 90° B for encoders
NPN- or PNP-compatible 1 or 2 channels A and Up/Down, A-B, A+B or A 90° B for encoders
SSI signals up to 31 bits, gray or binary code
Reset Manual by key or no reset Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
Electric or manual by lockable key
-
Analog output - - - - - - - 0...10 V and -10....+10 V
Interfaces - - - - - - RS485, RS422 or RS232 RS485
Voltage supply - Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
12...24 VDC 24/48 VAC ±10% (50/60 Hz)115/230 VAC ±10% (50/60 Hz)24 VDC ±10%
85...265 VAC (50/60 Hz)24 VDC ±10 %
Dimensions W x H 53 x 28 mm DIN 48 x 24 mm DIN 48 x 24 mm DIN 48 x 24 mm DIN 48 x 24 mm 53 x 28 mm DIN 96 x 48 mm DIN 96 x 48 mm
Counting quantities is a process repeating thousands of times in production installations. One main aid for quantity control is the totalizer. When utilized together with an encoder, it will even acquire and display length and position.
Totalizers / Position displays
10 www.baumer.com
Product name FS324 NE131 NE134 NE210 NE216 NE212 NE214 NE230
Features -Electromechanic -Two-line LCD display -Adding or subtracting -With integrated totalizer - Inputs: Voltage-impulses 12...260 VAC/VDC
-Two-line LCD display -Bidirectional -With integrated totalizer and batch counter -Start / stop functionality i.e. for dosing operations
-LED display, red-Timer functions
-LED display, red-With integrated totalizer-Start / stop functionality i.e. for dosing operations
-Keypad with 10 numerals for convenient value entry
-Particularly suitable for cutting to length operations
-With integrated totalizer, batch counter and timer
-Large LED display, red-Analog output-With integrated totalizer and timer
-LED display, red-DIN rail mount-With integrated totalizer and timer
Display 6-digit, 4.5 mm 6-digit + negative signLCD, 7 and 4 mm, backlit
6-digit + negative signLCD, 7 and 4 mm, backlit
5-digit + negative signLED red, 8 mm
5-digit + negative signLED red, 8 mm
8-digit + negative signLED red, 14 mm
6-digit + negative signLED red, 14 mm
6-digit + negative signLED red, 8 mm
Count input Voltage pulse 24 VDC,24, 48, 110 or 220 VAC
Voltage pulse12...260 VAC/VDC
NPN-, PNP-, TTL-compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN- or PNP-compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN-, PNP-, TTL-compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN- or PNP- compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN-, PNP-, TTL- compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN-, PNP-, TTL-compatible 1 or 2 channels A-B, A+B or encoder A90°B
Preset 1 preset 1 or 2 presets 2 presets or 1 preset+ 1 batch counter
1 preset 2 presets 2 presets+ 1 batch counter
2 presets 2 presets
Output 1 relay 1 or 2 relays 2, relay or electronic 1, relay or electronic 2, relay or electronic 3, relay or electronic 2, relay or electronic 2 relays
Analog output - - - - - - 0...10 V or 4...20 mA -
Interfaces - - RS485 - RS485 RS485, RS422 or RS232 RS485, RS422 or RS232 RS485, RS422 or RS232
Voltage supply - 10...30 VAC (50/60 Hz)85...265 VAC (50/60 Hz)10...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)24 VDC ±10 %
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)24 VDC ±10 %
24/48 VAC ±10 % (50/60 Hz)115/230 VAC ±10 % (50/60 Hz)24 VDC ±10 %
14...28 VAC (50/60 Hz)85...265 VAC (50/60 Hz)10...30 VDC
Dimensions W x H 53 x 53 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 72 x 72 mm DIN 96 x 48 mm 70 x 89 mm
Preset counters
11www.baumer.com
Product name FS324 NE131 NE134 NE210 NE216 NE212 NE214 NE230
Features -Electromechanic -Two-line LCD display-Adding or subtracting-With integrated totalizer- Inputs: Voltage-impulses 12...260 VAC/VDC
-Two-line LCD display-Bidirectional-With integrated totalizer and batch counter
-Start / stop functionality i.e. for dosing operations
-LED display, red -Timer functions
-LED display, red -With integrated totalizer -Start / stop functionality i.e. for dosing operations
-Keypad with 10 numerals for convenient value entry -Particularly suitable for cutting to length operations -With integrated totalizer, batch counter and timer
-Large LED display, red -Analog output -With integrated totalizer and timer
-LED display, red -DIN rail mount -With integrated totalizer and timer
Display 6-digit, 4.5 mm 6-digit + negative signLCD, 7 and 4 mm, backlit
6-digit + negative signLCD, 7 and 4 mm, backlit
5-digit + negative signLED red, 8 mm
5-digit + negative signLED red, 8 mm
8-digit + negative signLED red, 14 mm
6-digit + negative signLED red, 14 mm
6-digit + negative signLED red, 8 mm
Count input Voltage pulse 24 VDC,24, 48, 110 or 220 VAC
Voltage pulse12...260 VAC/VDC
NPN-, PNP-, TTL-compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN- or PNP-compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN-, PNP-, TTL-compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN- or PNP- compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN-, PNP-, TTL- compatible 1 or 2 channels A-B, A+B or encoder A90°B
NPN-, PNP-, TTL-compatible 1 or 2 channels A-B, A+B or encoder A90°B
Preset 1 preset 1 or 2 presets 2 presets or 1 preset+ 1 batch counter
1 preset 2 presets 2 presets+ 1 batch counter
2 presets 2 presets
Output 1 relay 1 or 2 relays 2, relay or electronic 1, relay or electronic 2, relay or electronic 3, relay or electronic 2, relay or electronic 2 relays
Analog output - - - - - - 0...10 V or 4...20 mA -
Interfaces - - RS485 - RS485 RS485, RS422 or RS232 RS485, RS422 or RS232 RS485, RS422 or RS232
Voltage supply - 10...30 VAC (50/60 Hz)85...265 VAC (50/60 Hz)10...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)24 VDC ±10 %
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)24 VDC ±10 %
24/48 VAC ±10 % (50/60 Hz)115/230 VAC ±10 % (50/60 Hz)24 VDC ±10 %
14...28 VAC (50/60 Hz)85...265 VAC (50/60 Hz)10...30 VDC
Dimensions W x H 53 x 53 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 72 x 72 mm DIN 96 x 48 mm 70 x 89 mm
Cutting to length, positioning and packaging operations are tasks where length, time or quantities must be counted, evaluated and displayed. But a preset counter can do a whole lot more: Compare values, evaluate differences, output control values and communicate with master controls via serial interface.
Preset counters
12 www.baumer.com
Product name B 148 B 160 ISI34 ISI35 NE131 BE134 NE210 NE216
Features -Electromechanic -Low-cost variant -System-integrated, top-mount or DIN rail
-Electromechanic -System-integrated or DIN rail mount
-For universal use -For universal use -Two-line LCD display -Adding / subtracting -With integrated totalizer -Voltage inputs, max. 260 VAC/VDC
-Two-line LCD display -With integrated totalizer and batch counter -Timer function with start-/stop inputs
-LED display, red -Timer function
-LED display, red -With integrated totalizer -Timer function with start-/stop inputs
Display 7-digit, 4.5 mm 7-digit, 4.5 mm 8-digit, LCD, 8 mm, backlit 8-digit, LCD, 8 mm, backlit 6-digit, LCD, 7 and 4 mm, backlit
6-digit, LCD, 7 and 4 mm, backlit
5-digit, LED red, 8 mm 5-digit, LED red, 8 mm
Resolution 99 999.99 h 99 9999.9 h 99999.99h - 99999h59min
99999min59s - 99999999s
9 999.99 h - 9 999 h 59 min9 999 min 59 s - 9 999,99 s
9 999 h 59 min - 9 999 min 59 s999 min 59 s 9/10 s - 9 999.99 s
999 h 59 min - 999 min 59 s99 min 59 s 9/10 s - 999.99 s
999 h 59 min - 999 min 59 s99 min 59 s 9/10 s - 999.99 s
Count input Voltage 24, 48, 115, 230 or 380 VAC with 50 or 60 Hz
Voltage 10...80 VDC Potential-free contact, NPN, PNP or voltage10...260 VAC/VDC
Potential-free contact, NPN, PNP or voltage 10...260 VAC/VDC
Voltage12...260 VAC/VDC
NPN-, PNP-, TTL- compatible
NPN- or PNP- compatible NPN-, PNP-, TTL- compatible
Preset - - - - 1 or 2 presets 1 or 2 presets+ 1 batch counter
1 preset 2 presets
Output - - - - 1 or 2 relays 2, relay or electronic 1, relay or electronic 2, relay or electronic
Interfaces - - - - - RS485 - RS485
Reset Without reset Without reset Electric or manual by lockable key
Electric or manual by lockable key
- - - -
Voltage supply - - Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
85...265 VAC (50/60 Hz)10...30 VAC (50/60 Hz)10...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)24 VDC ±10 %
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
Dimensions W x H DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x24 mm DIN 48 x 24 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm
Time meters, totalizers or preset counters
13www.baumer.com
Product name B 148 B 160 ISI34 ISI35 NE131 BE134 NE210 NE216
Features -Electromechanic-Low-cost variant-System-integrated, top-mount or DIN rail
-Electromechanic-System-integrated or DIN rail mount
-For universal use -For universal use -Two-line LCD display -Adding / subtracting -With integrated totalizer -Voltage inputs, max. 260 VAC/VDC
-Two-line LCD display -With integrated totalizer and batch counter -Timer function with start-/stop inputs
-LED display, red -Timer function
-LED display, red -With integrated totalizer -Timer function with start-/stop inputs
Display 7-digit, 4.5 mm 7-digit, 4.5 mm 8-digit, LCD, 8 mm, backlit 8-digit, LCD, 8 mm, backlit 6-digit, LCD, 7 and 4 mm, backlit
6-digit, LCD, 7 and 4 mm, backlit
5-digit, LED red, 8 mm 5-digit, LED red, 8 mm
Resolution 99 999.99 h 99 9999.9 h 99999.99h - 99999h59min
99999min59s - 99999999s
9 999.99 h - 9 999 h 59 min9 999 min 59 s - 9 999,99 s
9 999 h 59 min - 9 999 min 59 s999 min 59 s 9/10 s - 9 999.99 s
999 h 59 min - 999 min 59 s99 min 59 s 9/10 s - 999.99 s
999 h 59 min - 999 min 59 s99 min 59 s 9/10 s - 999.99 s
Count input Voltage 24, 48, 115, 230 or 380 VAC with 50 or 60 Hz
Voltage 10...80 VDC Potential-free contact, NPN, PNP or voltage10...260 VAC/VDC
Potential-free contact, NPN, PNP or voltage 10...260 VAC/VDC
Voltage12...260 VAC/VDC
NPN-, PNP-, TTL- compatible
NPN- or PNP- compatible NPN-, PNP-, TTL- compatible
Preset - - - - 1 or 2 presets 1 or 2 presets+ 1 batch counter
1 preset 2 presets
Output - - - - 1 or 2 relays 2, relay or electronic 1, relay or electronic 2, relay or electronic
Interfaces - - - - - RS485 - RS485
Reset Without reset Without reset Electric or manual by lockable key
Electric or manual by lockable key
- - - -
Voltage supply - - Lithium battery (lifetime >8 years)
Lithium battery (lifetime >8 years)
85...265 VAC (50/60 Hz)10...30 VAC (50/60 Hz)10...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)24 VDC ±10 %
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60 Hz)12...30 VDC
Dimensions W x H DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x24 mm DIN 48 x 24 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm DIN 48 x 48 mm
Time and hour counters are brought to the fore wherever operation hours of machines, installations and systems have to be acquired.For time-controlled processes there are product variants with preset, control outputs and RS485 interface.
Time meters, totalizers or preset counters
14 www.baumer.com
Product name N 150 N 140, N 141 N 152 N 142 N 155 N 153 N 242 GK473 BG440, BG650
Features -Multicon -Manual, user-operated alignment -Compact design
-Multicon -Manual, user-operated alignment -Correction button for tool radius (N 141)
-MulticonDrive -Fully automated alignment -Compact dimensions -Control outputs for motor trigger (BG440 or BG650)
-MulticonDrive -Fully automated alignment -Control outputs for motor trigger (BG440 or BG650)
-Conveniently displayed as electronic note block
-Displaying the values transferred by Master or network gateway
-Product variant without integrated encoder
-Multicon AccuDrive-Position aligment via ASMIR-power tool
-Semi-automatic alignment
-Memory controller-Multicon / MulticonDrive-Managing up to 100 profiles of 32 spindles
-Teach mode
-Network gateway CANopen, DeviceNet or Profibus
-Max. 32 displays in the RS485 network
-Brushless DC motor with planetary gearing
- Integrated speed control electronics
-5 capacities from 20 W to 140 W
-4 control inputs, clockwise, counterclockwise,speed 1, speed 2
Display LCD, 2 lines-99.99 to 999.99 mm or-9.999 to 99.999 Inch
LCD, 2 lines-999.99 to 9999.99 mm or-99.999 to 999.999 Inch
LCD, 2 lines-99.99 to 999.99 mm or-9.999 to 99.999 Inch
LCD, 2 lines-999.99 to 9999.99 mm or-99.999 to 999.999 Inch
LCD, 2 lines-9999...99999
LCD, 2 lines-99.99 to 999.99 mm or-9.999 to 99.999 Inch
2 x 16 charactersLCD, 10 mm, backlit
4 x signal LED -
Voltage supply 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 85...265 VAC 12...24 VDC 24 VDC
Interfaces RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485 RS485 -
Resolution 1440 steps/revolutionto ±4096 revolutions
2304 steps/revolutionto ±4096 revolutions
1440 steps/revolutionto ±4096 revolutions
2304 steps/revolutionto ±4096 revolutions
- 1440 steps/revolutionto ±4096 revolutions
- - -
Hollow shaft ø14 mm ø20, ø25 mm ø14 mm ø20, ø25 mm - ø14 mm - - -
DimensionsB x H x T
37 x 75 x 45 mm 56 x 100 x 84 mm 37 x 75 x 45 mm 56 x 100 x 84 mm 37 x 75 x 29 mm 37 x 75 x 45 mm DIN 144 x 144 mm 23 x 99 x 115 mm 44 x 44 x 166 - 191 mmor 65 x 65 x 177 - 202 - 227 mm
Spindle position displays / Components
15www.baumer.com
Product name N 150 N 140, N 141 N 152 N 142 N 155 N 153 N 242 GK473 BG440, BG650
Features -Multicon -Manual, user-operated alignment -Compact design
-Multicon -Manual, user-operated alignment -Correction button for tool radius (N 141)
-MulticonDrive -Fully automated alignment -Compact dimensions -Control outputs for motor trigger (BG440 or BG650)
-MulticonDrive -Fully automated alignment -Control outputs for motor trigger (BG440 or BG650)
-Conveniently displayed as electronic note block -Displaying the values transferred by Master or network gateway -Product variant without integrated encoder
-Multicon AccuDrive -Position aligment via ASMIR-power tool -Semi-automatic alignment
-Memory controller -Multicon / MulticonDrive -Managing up to 100 profi les of 32 spindles -Teach mode
-Network gateway CANopen, DeviceNet or Profi bus -Max. 32 displays in the RS485 network
-Brushless DC motor with planetary gearing - Integrated speed control electronics -5 capacities from 20 W to 140 W -4 control inputs, clockwise, counterclockwise,speed 1, speed 2
Display LCD, 2 lines-99.99 to 999.99 mm or-9.999 to 99.999 Inch
LCD, 2 lines-999.99 to 9999.99 mm or-99.999 to 999.999 Inch
LCD, 2 lines-99.99 to 999.99 mm or-9.999 to 99.999 Inch
LCD, 2 lines-999.99 to 9999.99 mm or-99.999 to 999.999 Inch
LCD, 2 lines-9999...99999
LCD, 2 lines-99.99 to 999.99 mm or-9.999 to 99.999 Inch
2 x 16 charactersLCD, 10 mm, backlit
4 x signal LED -
Voltage supply 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 24 VDC ±20 % 85...265 VAC 12...24 VDC 24 VDC
Interfaces RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485, ASCII protocol RS485 RS485 -
Resolution 1440 steps/revolutionto ±4096 revolutions
2304 steps/revolutionto ±4096 revolutions
1440 steps/revolutionto ±4096 revolutions
2304 steps/revolutionto ±4096 revolutions
- 1440 steps/revolutionto ±4096 revolutions
- - -
Hollow shaft ø14 mm ø20, ø25 mm ø14 mm ø20, ø25 mm - ø14 mm - - -
DimensionsB x H x T
37 x 75 x 45 mm 56 x 100 x 84 mm 37 x 75 x 45 mm 56 x 100 x 84 mm 37 x 75 x 29 mm 37 x 75 x 45 mm DIN 144 x 144 mm 23 x 99 x 115 mm 44 x 44 x 166 - 191 mmor 65 x 65 x 177 - 202 - 227 mm
Numerous spindles at production installations require alignment to the respective manufacturing profi le – most often this is done manually using hand cranks. With every format re-alignment the editing engineer has to enter the relevant position values provided on a printed document, which is a potential error source. Position displays of the multicon® series indicate both current value and related target, latter are provided by master controller or PLC. multiconDrive® makes any hand crank superfl uous. The position display for direct, automatic motor trigger ensures pinpoint target achievement.
Spindle position displays / Components
16 www.baumer.com
Product name TA1200 TA1220 TA134 TA200 TA201 TA202 PCD41 PCD45
Features -Compact design -Limit outputs -Compact design
-Two-line LCD display -Limit outputs -With integrated totalizer
-Large LED display -Max. frequency 40 kHz
- Indication of 2 speeds, difference, ratio, material compression / stretch or torsion
- Indication of 2 speeds, difference, ratio, material compression / stretch or torsion
- Limit outputs-Analog outputs- Serial interface
-Analog input-Peak value memory-Limit output
-2 analog inputs-3 analog outputs- Indication of 2 measured values with related ratio or difference
-Limit outputs
Display 4-digit, LED red, 10 mm 4-digit, LED red, 10 mm 6-digit, LCD, 7 and 4 mm, backlit
6-digit, LED red, 14 mm 6-digit, LED red, 14 mm 6-digit, LED red, 14 mm 6-digit, LED red, 14 mm 6-digit, LED red, 14 mm
Pulse input NPN-, PNP-, Namur, TTL- compatible or sine
NPN-, PNP-, Namur, TTL- compatible or sine
NPN-, PNP-, Namur- or TTL- compatible
NPN-, PNP- compatible NPN-, PNP-, TTL- compatible
2 NPN-, PNP-, TTL- compatible inputs
- -
Analog input - - - - - - 1 input 0...10 V or 4...20 mA
2 inputs 0...10 V or 4...20 mA
Limits - 2 limits 2 limits - - 2 limits 2 limits 2 limits
Output - 2 relay 2, relay or electronic - - 2, relay or electronic 2, relay 2, relay
Analog output - - - - - 0...10 V or 4...20 mA - 3 outputs ±10 V
Interfaces - RS485 RS485 - - RS485, RS422 or RS232 RS485, RS422 or RS232 RS485, RS422 or RS232
Voltage supply 21...53 VAC (50/60Hz) or 10.5...70 VDC85...265 VAC (50/60Hz) or100...300 VDC
21...53 VAC (50/60Hz) or 10.5...70 VDC85...265 VAC (50/60Hz) or100...300 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60Hz)12...30 VDC
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)24 VAC ±10%
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)24 VAC ±10%
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)24 VAC ±10%
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)12...30 VDC
85...265 VAC (50/60Hz)18...30 VDC
Dimensions W x H DIN 48 x24 mm DIN 48 x 24 mm DIN 48 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Tachometers and process displays
17www.baumer.com
Product name TA1200 TA1220 TA134 TA200 TA201 TA202 PCD41 PCD45
Features -Compact design -Limit outputs-Compact design
-Two-line LCD display-Limit outputs-With integrated totalizer
-Large LED display-Max. frequency 40 kHz
- Indication of 2 speeds, difference, ratio, material compression / stretch or torsion
- Indication of 2 speeds, difference, ratio, material compression / stretch or torsion - Limit outputs -Analog outputs - Serial interface
-Analog input -Peak value memory -Limit output
-2 analog inputs -3 analog outputs - Indication of 2 measured values with related ratio or difference -Limit outputs
Display 4-digit, LED red, 10 mm 4-digit, LED red, 10 mm 6-digit, LCD, 7 and 4 mm, backlit
6-digit, LED red, 14 mm 6-digit, LED red, 14 mm 6-digit, LED red, 14 mm 6-digit, LED red, 14 mm 6-digit, LED red, 14 mm
Pulse input NPN-, PNP-, Namur, TTL- compatible or sine
NPN-, PNP-, Namur, TTL- compatible or sine
NPN-, PNP-, Namur- or TTL- compatible
NPN-, PNP- compatible NPN-, PNP-, TTL- compatible
2 NPN-, PNP-, TTL- compatible inputs
- -
Analog input - - - - - - 1 input 0...10 V or 4...20 mA
2 inputs 0...10 V or 4...20 mA
Limits - 2 limits 2 limits - - 2 limits 2 limits 2 limits
Output - 2 relay 2, relay or electronic - - 2, relay or electronic 2, relay 2, relay
Analog output - - - - - 0...10 V or 4...20 mA - 3 outputs ±10 V
Interfaces - RS485 RS485 - - RS485, RS422 or RS232 RS485, RS422 or RS232 RS485, RS422 or RS232
Voltage supply 21...53 VAC (50/60Hz) or 10.5...70 VDC85...265 VAC (50/60Hz) or100...300 VDC
21...53 VAC (50/60Hz) or 10.5...70 VDC85...265 VAC (50/60Hz) or100...300 VDC
24/48 VAC ±10 % (50/60 Hz)85...265 VAC (50/60Hz)12...30 VDC
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)24 VAC ±10%
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)24 VAC ±10%
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)24 VAC ±10%
115/230 VAC ±10% (50/60Hz)24/48 VAC ±10% (50/60Hz)12...30 VDC
85...265 VAC (50/60Hz)18...30 VDC
Dimensions W x H DIN 48 x24 mm DIN 48 x 24 mm DIN 48 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Speed and clock rates are prerequisite parameters to be indicated and monitored in production facilities. Tachometers with combined measuring of cycle and gate times ensure precise results. User-programmable pulse evaluation enables value display in the required measuring unit.
Process displays allow for universal parameterization by one or two analog outputs. For safe and reliable process monitoring there are product variants featuring calculator function, limits, analog outputs and RS interface.
Tachometers and process displays
18 www.baumer.com
Product name PA200 PA210 PA220 PA408 PA418 PA420 PA430 PA440
Features -Compact design -Supply by current loop -Compact design
-Limit outputs -Compact design
-For universal tasks -Large LED display -Limit outputs -Optional 20 mm display
-Limit outputs -Analog output -Serial interface
-Limit outputs -Analog output -Serial interface -Automatic volume calculation
-Multifunctional -Two-line display -Limit outputs -Analog output -Serial interface
-High measuring rate 555/s
Display -1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 14 mm
-19 999 to 19 999LED red, green and amber, 14 mm
-32 000 to 32 000LED red, 14 mm
-99 999 to 99 999LED red, 14 mm
-9 999 to 9 999LED red, 14 mm
Input ±10 V or ±20 mA, up to 200 VDC or external shunt
+4 to +20 mA ±10 V or ±20 mA, up to 60 VDC or external shunt
±10 V or ±20 mA,thermocouples, Pt100/Pt1000, resistance measuring or potentiometer
±10 V or ±20 mA, thermocouples, Pt100, strain gauge or potentiometer
±10 V or ±20 mAor potentiometer
±10 V or ±20 mA,thermocouples, Pt100, strain gauge or potentiometer
Process ±10 V or ±20 mAstrain gauge or potentiometer
Limits - - 2 limits 2 limits 2 or 4 limits 2 or 4 limits 2 or 4 limits 2 or 4 limits
Function - - TARA and MIN/MAX MIN/MAX TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD
Output - - 2 relay 2 relay 2 or 4, relay or electronic 2 or 4, relay or electronic 2 or 4, relay or electronic 2 or 4, relay or electronic
Analog output - - - - 0...10 V or 4...20 mA 0...10 V or 4...20 mA 0...10 V or 4...20 mA 0...10 V or 4...20 mA
Interfaces - - RS485 - RS485 or RS232 RS485 or RS232 RS485 or RS232 RS485 or RS232
Voltage supply 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
- 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
12...265 VDC and 20...265 VAC
21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
24/115/230 VAC ±10% (50/60 Hz)10...30 VDC
24/115/230 VAC ±10% (50/60 Hz)
24/115/230 VAC ±10% (50/60 Hz)10...30 VDC
Dimensions W x H DIN 48 x 24 mm DIN 48 x 24 mm DIN 48 x 24 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Process displays for standard signals
19www.baumer.com
Product name PA200 PA210 PA220 PA408 PA418 PA420 PA430 PA440
Features -Compact design -Supply by current loop-Compact design
-Limit outputs-Compact design
-For universal tasks-Large LED display-Limit outputs-Optional 20 mm display
-Limit outputs -Analog output -Serial interface
-Limit outputs -Analog output -Serial interface -Automatic volume calculation
-Multifunctional -Two-line display -Limit outputs -Analog output -Serial interface
-High measuring rate 555/s
Display -1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 14 mm
-19 999 to 19 999LED red, green and amber, 14 mm
-32 000 to 32 000LED red, 14 mm
-99 999 to 99 999LED red, 14 mm
-9 999 to 9 999LED red, 14 mm
Input ±10 V or ±20 mA, up to 200 VDC or external shunt
+4 to +20 mA ±10 V or ±20 mA, up to 60 VDC or external shunt
±10 V or ±20 mA,thermocouples, Pt100/Pt1000, resistance measuring or potentiometer
±10 V or ±20 mA, thermocouples, Pt100, strain gauge or potentiometer
±10 V or ±20 mAor potentiometer
±10 V or ±20 mA,thermocouples, Pt100, strain gauge or potentiometer
Process ±10 V or ±20 mAstrain gauge or potentiometer
Limits - - 2 limits 2 limits 2 or 4 limits 2 or 4 limits 2 or 4 limits 2 or 4 limits
Function - - TARA and MIN/MAX MIN/MAX TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD
Output - - 2 relay 2 relay 2 or 4, relay or electronic 2 or 4, relay or electronic 2 or 4, relay or electronic 2 or 4, relay or electronic
Analog output - - - - 0...10 V or 4...20 mA 0...10 V or 4...20 mA 0...10 V or 4...20 mA 0...10 V or 4...20 mA
Interfaces - - RS485 - RS485 or RS232 RS485 or RS232 RS485 or RS232 RS485 or RS232
Voltage supply 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
- 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
12...265 VDC and 20...265 VAC
21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
24/115/230 VAC ±10% (50/60 Hz)10...30 VDC
24/115/230 VAC ±10% (50/60 Hz)
24/115/230 VAC ±10% (50/60 Hz)10...30 VDC
Dimensions W x H DIN 48 x 24 mm DIN 48 x 24 mm DIN 48 x 24 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Available with 2 or 4 limit outputs, process displays of the PA series monitor and display any physical values provided as analog signal. Limit programming is easy and convenient. The serial interface allows for remote access and communication.
Featuring numerous properties and functionalities, these process displays have got what it takes for universal deployment in diverse applications. Some product variants come with TARA, HOLD, MIN and MAX functionality, saving the MIN/MAX values of the input signal.
Process displays for standard signals
20 www.baumer.com
Product name PA201 PA408 PA418 PA430 PA402 PA418 PA422
Features -Compact design -For universal tasks -Large LED display -Limit outputs -Optionally 20 mm display
-Multifunctional -Limit outputs -Analog output -Serial interface
-Multifunctional -Twin display -Limit outputs -Analog output -Serial interface
-Large LED display -Limit outputs
-Multifunctional -Limit outputs -Analog output -Serial interface
-Limit outputs -Analog output -Serial interface
Display -1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 14 or 20 mm
-19 999 to 19 999LED red, green and amber, 14 mm
-99 999 to 99 999LED red, 14 mm
-1 999 to 9 999LED red, 14 mm
-19 999 to 19 999LED red, green and amber, 14 mm
-32 000 to 32 000LED red, 14 mm
Input Sensor Pt100 or thermocouples J,K,T
Pt100, Pt1000, thermocouples J,K,T,N, ±10 V or ±20 mA, resistance measuring or potentiometer
Sensor Pt100, thermocouples J,K,T,R,S,E or process ±10 V or ±20 mA,strain gauge or potentiometer
Sensor Pt100, thermocouples J,K,T,R,S,E or process ±10 V or ±20 mA,strain gauge or potentiometer
Strain gauge ±30 mV to ±300 mV
Sensor Pt100, thermocouples J,K,T,R,S,E or process ±10 V or ±20 mA,strain gauge or potentiometer
Strain gauge ±30 mV to ±300 mV
Limits - 2 limits 2 or 4 limits 2 or 4 limits 2 limits 2 or 4 limits 2 or 4 limits
Function - MIN/MAX TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD TARA TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD
Output - 2 relay 2 or 4, relay or electronic 2 or 4, relay or electronic 2 relay 2 or 4, relay or electronic 2 or 4, relays or electronic
Analog output - - 0...10 V or 4...20 mA 0...10 V or 4...20 mA - 0...10 V or 4...20 mA 0...10 V or 4...20 mA
Interfaces - - RS485 or RS232 RS485 or RS232 - RS485 or RS232 RS485 or RS232
Voltage supply 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
12...265 VDC and 20...265 VAC
85...265 VAC (50/60 Hz) or 100...300 VDC21...53 VAC (50/60 Hz) or 10,5...70 VDC
24/115/230 VAC ±10 % (50/60 Hz)
12...265 VDC and 20...265 VAC
85...265 VAC (50/60 Hz) or 100...300 VDC21...53 VAC (50/60 Hz) or 10.5...70 VDC
24/115/230 VAC ±10 % (50/60 Hz) 10...30 VDC
Dimensions W x H DIN 48 x 24 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Process displays for temperature
21www.baumer.com
Product name PA201 PA408 PA418 PA430 PA402 PA418 PA422
Features -Compact design -For universal tasks-Large LED display-Limit outputs-Optionally 20 mm display
-Multifunctional-Limit outputs-Analog output-Serial interface
-Multifunctional-Twin display-Limit outputs-Analog output-Serial interface
-Large LED display -Limit outputs
-Multifunctional -Limit outputs -Analog output -Serial interface
-Limit outputs -Analog output -Serial interface
Display -1 999 to 9 999LED red, 10 mm
-1 999 to 9 999LED red, 14 or 20 mm
-19 999 to 19 999LED red, green and amber, 14 mm
-99 999 to 99 999LED red, 14 mm
-1 999 to 9 999LED red, 14 mm
-19 999 to 19 999LED red, green and amber, 14 mm
-32 000 to 32 000LED red, 14 mm
Input Sensor Pt100 or thermocouples J,K,T
Pt100, Pt1000, thermocouples J,K,T,N, ±10 V or ±20 mA, resistance measuring or potentiometer
Sensor Pt100, thermocouples J,K,T,R,S,E or process ±10 V or ±20 mA,strain gauge or potentiometer
Sensor Pt100, thermocouples J,K,T,R,S,E or process ±10 V or ±20 mA,strain gauge or potentiometer
Strain gauge ±30 mV to ±300 mV
Sensor Pt100, thermocouples J,K,T,R,S,E or process ±10 V or ±20 mA,strain gauge or potentiometer
Strain gauge ±30 mV to ±300 mV
Limits - 2 limits 2 or 4 limits 2 or 4 limits 2 limits 2 or 4 limits 2 or 4 limits
Function - MIN/MAX TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD TARA TARA, MIN/MAX and HOLD TARA, MIN/MAX and HOLD
Output - 2 relay 2 or 4, relay or electronic 2 or 4, relay or electronic 2 relay 2 or 4, relay or electronic 2 or 4, relays or electronic
Analog output - - 0...10 V or 4...20 mA 0...10 V or 4...20 mA - 0...10 V or 4...20 mA 0...10 V or 4...20 mA
Interfaces - - RS485 or RS232 RS485 or RS232 - RS485 or RS232 RS485 or RS232
Voltage supply 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
12...265 VDC and 20...265 VAC
85...265 VAC (50/60 Hz) or 100...300 VDC21...53 VAC (50/60 Hz) or 10,5...70 VDC
24/115/230 VAC ±10 % (50/60 Hz)
12...265 VDC and 20...265 VAC
85...265 VAC (50/60 Hz) or 100...300 VDC21...53 VAC (50/60 Hz) or 10.5...70 VDC
24/115/230 VAC ±10 % (50/60 Hz) 10...30 VDC
Dimensions W x H DIN 48 x 24 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Temperature displays evaluate the signal generated by sensor Pt100, Pt1000 or thermocouple and will indicate the temperature in °C or F.
Displays for strain gauge (DMS) sensors are intended to indicate and monitor weight or load using a measurement bridge or strain gauge.
Process displays for strain gauge (DMS) sensors
22 www.baumer.com
Product name PA203 PA213 PA403 PA408 PA419
Features -Compact design -Power supply by measured voltage -Compact design
-Large LED display -Limit outputs
-For universal tasks -Large LED display -Limit outputs
-Analog output-Serial interface-Limit outputs
Display -1 999 to 9 999LED red, 10 mm
8.0 to 32.0LED red, 10 mm
-1 999 to 9 999LED red, 14 mm
-1 999 to 9 999LED red, 14 mm
- 19 999 to 19 999LED red, green and amber, 14 mm
Input Voltage max. 600 VCurrent max. 5 AAC and DC
8...32 VDC Voltage max. 600 VCurrent max. 5 AAC and DC or shunt 60 or 100 mV
Resistance measurement ±10 V or ±20 mA, thermocouples, Pt100, Pt1000 or potentiometer
Voltage max. 600 VCurrent max. 5 A,AC (TRMS) and DC or shunt 50, 60, 100 mV
Limits - - 2 limits 2 limits 2 or 4 limits
Function - - MIN/MAX MIN/MAX TARA, MIN/MAX and HOLD
Output - - 2 relays 2 relays 2 or 4, relay or electronic
Analog output - - - - 0...10 V or 4...20 mA
Interfaces - - - - RS485 or RS232
Voltage supply 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
- 20...265 VAC and12...265 VDC
20...265 VAC and12...265 VDC
85...265 VAC (50/60 Hz) or 100...300 VDC 21...53 VAC (50/60 Hz) or 10.5...70 VDC
Dimensions W x H DIN 48 x 24 mm DIN 48 x 24 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Process displays for electric values
23www.baumer.com
Product name PA203 PA213 PA403 PA408 PA419
Features -Compact design -Power supply by measured voltage
-Compact design
-Large LED display-Limit outputs
-For universal tasks-Large LED display-Limit outputs
-Analog output -Serial interface -Limit outputs
Display -1 999 to 9 999LED red, 10 mm
8.0 to 32.0LED red, 10 mm
-1 999 to 9 999LED red, 14 mm
-1 999 to 9 999LED red, 14 mm
- 19 999 to 19 999LED red, green and amber, 14 mm
Input Voltage max. 600 VCurrent max. 5 AAC and DC
8...32 VDC Voltage max. 600 VCurrent max. 5 AAC and DC or shunt 60 or 100 mV
Resistance measurement ±10 V or ±20 mA, thermocouples, Pt100, Pt1000 or potentiometer
Voltage max. 600 VCurrent max. 5 A,AC (TRMS) and DC or shunt 50, 60, 100 mV
Limits - - 2 limits 2 limits 2 or 4 limits
Function - - MIN/MAX MIN/MAX TARA, MIN/MAX and HOLD
Output - - 2 relays 2 relays 2 or 4, relay or electronic
Analog output - - - - 0...10 V or 4...20 mA
Interfaces - - - - RS485 or RS232
Voltage supply 21...53 VAC (50/60 Hz) or 10.5...70 VDC85...265 VAC (50/60 Hz) or 100...300 VDC
- 20...265 VAC and12...265 VDC
20...265 VAC and12...265 VDC
85...265 VAC (50/60 Hz) or 100...300 VDC 21...53 VAC (50/60 Hz) or 10.5...70 VDC
Dimensions W x H DIN 48 x 24 mm DIN 48 x 24 mm DIN 96 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mm
Such instruments display and monitor voltage and current values (AC/DC). Display PA408 is also capable of measuring and monitoring resistors.
Process displays for electric values
24 www.baumer.com
Product name D060A - D065A D060T - D065T D060P - D065P D060S - D065S
Features -Process input ±10 V and ±20 mA -LED red, green or amber, depending on the value displayed
-Temperature input for sensor Pt100 and thermocouples J, K, T -LED red, green or amber, depending on the value displayed
- Inputs BCD -Counter -Tachometers -Time meter -LED red, green or amber, depending on the value displayed
-Serial interface RS485/RS232 -ASCII, ISO1745 protocol, modbus, S7-200 -Compatible to our controllers, tachometers and displays -LED red, green or amber, depending on the value displayed
Display 3-color LED 3-color LED 3-color LED 3-color LED
Number of digits 3- to 5- 3- to 5- 4- to 8- 3- to 8-
Character height 57 mm 57 mm 57 mm 57 mm
Reading distance 30 m 30 m 30 m 30 m
Protection IP 41 or IP 65 IP 41 or IP 65 IP 41 or IP 65 IP 41 or IP 65
Voltage supply 230 VAC 230 VAC 230 VAC 230 VAC
Outstanding contrast properties and large characters of 57 mm in height allow for optimal readability even from remote. Variants D060A-D065A provide two limits and an additional ±10 V and ±20 mA input with a display range that can be individually linearised. Temperature displays D060T-D065T come with Pt100 and thermocouple inputs. Numeric displays D060P-D065P transfer the indicated values in BCD parallel or BCD multiplex mode. Corresponding configuration will turn the display into a counter, tachometer or time meter with two limits. Numeric displays D060S-D065S feature RS232 or RS485 interface.
Large displays, numeric
25www.baumer.com
Product name DA050P DA050S
Features -14 inputs for retrieving device-stored messages
-Message transmission and retrieval via serial interface RS485/RS232 -ASCII protocol, modbus, omron, S7-200
Display LED red LED red
Number of lines 1 to 6 1 to 6
Character height 50 mm 50 mm
Total of characters 20 20
Reading distance 30 m 30 m
Protection IP 41 IP 41
Voltage supply 230 VAC 230 VAC
Our large-capacity alphanumeric displays with characters of 50 mm in height will announce the information appropriately in any situation.Thanks to different communication modes, the data to be displayed are either previously entered and stored in the device or externally transferred step by step. Permanent message storage and display by external signal or, as an alternative, message transfer and display via serial interface.
Large displays, alphanumeric
26 www.baumer.com
Product name U 310 U 300 U 400 - U 410 UE230 M 310 M 300 M 410 M 400 ME230
Features Revolution counter Revolution counter Revolution counter Revolution counter,1 preset
Meter counter Meter counter Meter counter Meter counter Meter counter, 1 preset
Display 99 999height 4.5 mm
999 999height 4.5 mm
9 999 999height 7 mm
99 999height 7 mm
9999.9height 4.5 mm
99999.9height 4.5 mm
9999.9height 7 mm
999 999.9height 7 mm
99 999Height 7 mm
Resolution 1 revolution = 1 count 1 revolution = 1 count 1 revolution = 1 count variant-specifi c 5 revolutions = 1.0 5 revolutions = 1.0 2 revolutions = 1.0 2 revolutions = 1.0 variant-specific
Accuracy - - - - 1 dm 1 dm 1 dm, 1 cm 1 dm 1 m, 1 dm
Speed ≤3000 rpm ≤3000 rpm ≤1000 rpm ≤5000 rpm <200 m/min with measuring wheel
<100 m/min with measuring wheel
<200 m/min with measuring wheel
<100 m/min with measuring wheel
<2500 m/min for 2 revolutions = 1
Shaft diameter 4 mm 4 mm 7 mm 7 mm 4 mm 4 mm 7 mm 7 mm 7 mm
Mounting Mounting plate with 6 holes
Mounting plate with 6 holes
Mounting plate with 4 holes
Base plate with 4 mounting holes
Mounting plate with 6 holes
Mounting plate with 6 holes
Mounting plate with 4 holes
Mounting plate with 4 holes
Base plate with 4 mounting holes
Preset - - - 1 preset - - - - 1 preset
Output - - - 1 change-over contact - - - - 1 change-over contact
Reset Reset lever Detachable reset key Detachable reset key / lever Reset lever Reset lever Detachable reset key Reset lever Detachable reset key Reset lever
Optional PTB certifi cate M 310 A M 410 A
Mechanical counters
27www.baumer.com
Product name U 310 U 300 U 400 - U 410 UE230 M 310 M 300 M 410 M 400 ME230
Features Revolution counter Revolution counter Revolution counter Revolution counter,1 preset
Meter counter Meter counter Meter counter Meter counter Meter counter, 1 preset
Display 99 999height 4.5 mm
999 999height 4.5 mm
9 999 999height 7 mm
99 999height 7 mm
9999.9height 4.5 mm
99999.9height 4.5 mm
9999.9height 7 mm
999 999.9height 7 mm
99 999Height 7 mm
Resolution 1 revolution = 1 count 1 revolution = 1 count 1 revolution = 1 count variant-specific 5 revolutions = 1.0 5 revolutions = 1.0 2 revolutions = 1.0 2 revolutions = 1.0 variant-specifi c
Accuracy - - - - 1 dm 1 dm 1 dm, 1 cm 1 dm 1 m, 1 dm
Speed ≤3000 rpm ≤3000 rpm ≤1000 rpm ≤5000 rpm <200 m/min with measuring wheel
<100 m/min with measuring wheel
<200 m/min with measuring wheel
<100 m/min with measuring wheel
<2500 m/min for 2 revolutions = 1
Shaft diameter 4 mm 4 mm 7 mm 7 mm 4 mm 4 mm 7 mm 7 mm 7 mm
Mounting Mounting plate with 6 holes
Mounting plate with 6 holes
Mounting plate with 4 holes
Base plate with 4 mounting holes
Mounting plate with 6 holes
Mounting plate with 6 holes
Mounting plate with 4 holes
Mounting plate with 4 holes
Base plate with 4 mounting holes
Preset - - - 1 preset - - - - 1 preset
Output - - - 1 change-over contact - - - - 1 change-over contact
Reset Reset lever Detachable reset key Detachable reset key / lever Reset lever Reset lever Detachable reset key Reset lever Detachable reset key Reset lever
Optional PTB certificate M 310 A M 410 A
Mechanical counters acquire length, strokes or revolutions via the drive shaft. Such counters are deployed in systems for distance measuring, trestle tables or at presses and punches when cutting cable to a determined length. Main benefi t of mechanical counters is on-site measurement without power supply. The measuring results are that precise that some counter variants are PTB-certifi ed (German Metrology Institute) and capable of calibrated length measurement.
Mechanical counters
28 www.baumer.com
Mechanical counters
Product name H 310 H 300 H 410 H 400 H 127 T 127 T 130, T 134 T 120, T 123, T 124
Features Stroke counter Stroke counter Stroke counter Stroke counter Stroke counter Piece counter with lever Handheld piece counterPlastic housing
Handheld piece counterMetal housing
Display 99 999height 4.5 mm
999 999height 4.5 mm
99 999height 7 mm
999 999height 7 mm
99 999height 4.5 mm
9 999height 4.5 mm
9 999height 4.5 mm
9 999height 4.5 mm
Resolution 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1
Stroke angle >38° and <60° >38° and <60° >38° and <60° >38° and <60° >38° and <60° >38° and <60° - -
Speed <500 strokes/min <500 strokes/min <500 strokes/min <500 strokes/min <500 strokes/min - - -
Shaft diameter 4 mm 4 mm 7 mm 7 mm 4 mm 4 mm - -
Lever diameter 5 mm 5 mm 6 mm 6 mm 3.5 mm - - -
Mount Mounting plate with 6 holes
Mounting plate with 6 holes
Mounting plate with 4 holes
Mounting plate with 4 holes
Mounting plate with 2 holes
Mounting plate with 2 holes
Retaining ring or base plate with 3 mounting holes
Retaining ring or base plate with 3 mounting holes
Reset Reset lever Detachable reset key Reset lever Detachable reset key Knurled reset button Knurled reset button Knurled reset button Knurled reset button
29www.baumer.com
Stroke counters for example will count the strokes of presses and punches. Mechanical handheld piece counters for mobile and stationary use ease counting persons, parts, events, etc.
Mechanical counters
Product name H 310 H 300 H 410 H 400 H 127 T 127 T 130, T 134 T 120, T 123, T 124
Features Stroke counter Stroke counter Stroke counter Stroke counter Stroke counter Piece counter with lever Handheld piece counterPlastic housing
Handheld piece counterMetal housing
Display 99 999height 4.5 mm
999 999height 4.5 mm
99 999height 7 mm
999 999height 7 mm
99 999height 4.5 mm
9 999height 4.5 mm
9 999height 4.5 mm
9 999height 4.5 mm
Resolution 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1 1 stroke = 1
Stroke angle >38° and <60° >38° and <60° >38° and <60° >38° and <60° >38° and <60° >38° and <60° - -
Speed <500 strokes/min <500 strokes/min <500 strokes/min <500 strokes/min <500 strokes/min - - -
Shaft diameter 4 mm 4 mm 7 mm 7 mm 4 mm 4 mm - -
Lever diameter 5 mm 5 mm 6 mm 6 mm 3.5 mm - - -
Mount Mounting plate with 6 holes
Mounting plate with 6 holes
Mounting plate with 4 holes
Mounting plate with 4 holes
Mounting plate with 2 holes
Mounting plate with 2 holes
Retaining ring or base plate with 3 mounting holes
Retaining ring or base plate with 3 mounting holes
Reset Reset lever Detachable reset key Reset lever Detachable reset key Knurled reset button Knurled reset button Knurled reset button Knurled reset button
30 www.baumer.com
Product name MR211 MR241 MR261 MR291 MR512 MR542 MR552 MR562 MR592
Circumference 20 cm 20 cm 20 cm 20 cm 50 cm 50 cm 50 cm 50 cm 50 cm
Outer diameter 63.66 mm 63.66 mm 63.66 mm 63.66 mm 159.15 mm 159.15 mm 159.15 mm 159.15 mm 159.15 mm
Surface profi le Cross knurl Smooth Knopped rubber Knurled Cross knurl Smooth Smooth Knopped rubber Knurled
Surface material Aluminium Hytrel TPE-E NBR Nitril Hytrel TPE-E Aluminium Hytrel TPE-E Vulkollan PUR NBR Nitril Hytrel TPE-E
Wheel material Aluminium Plastic Aluminium Plastic Aluminium Plastic Aluminium Aluminium Plastic
Shore hardness approx. - 90° shore A 55° ±5° shore A 90° shore A - 90° shore A 94° shore A 55° ±5° shore A 90° shore A
Operation temperature -30...+180 °C -10...+70 °C -10...+50 °C -10...+70 °C -30...+180 °C -10...+70 °C -30...+80 °C -10...+50 °C -10...+70 °C
Appropriate material Cardboard, wood, fabric/textiles
Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Fabric/textiles Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Cardboard, wood, fabric/textiles
Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Wire, wood, plastic, vanished surfaces, metal, paper, cardboard, fabric
Fabric/textiles Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Measuring wheels
31www.baumer.com
Product name MR211 MR241 MR261 MR291 MR512 MR542 MR552 MR562 MR592
Circumference 20 cm 20 cm 20 cm 20 cm 50 cm 50 cm 50 cm 50 cm 50 cm
Outer diameter 63.66 mm 63.66 mm 63.66 mm 63.66 mm 159.15 mm 159.15 mm 159.15 mm 159.15 mm 159.15 mm
Surface profile Cross knurl Smooth Knopped rubber Knurled Cross knurl Smooth Smooth Knopped rubber Knurled
Surface material Aluminium Hytrel TPE-E NBR Nitril Hytrel TPE-E Aluminium Hytrel TPE-E Vulkollan PUR NBR Nitril Hytrel TPE-E
Wheel material Aluminium Plastic Aluminium Plastic Aluminium Plastic Aluminium Aluminium Plastic
Shore hardness approx. - 90° shore A 55° ±5° shore A 90° shore A - 90° shore A 94° shore A 55° ±5° shore A 90° shore A
Operation temperature -30...+180 °C -10...+70 °C -10...+50 °C -10...+70 °C -30...+180 °C -10...+70 °C -30...+80 °C -10...+50 °C -10...+70 °C
Appropriate material Cardboard, wood, fabric/textiles
Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Fabric/textiles Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Cardboard, wood, fabric/textiles
Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Wire, wood, plastic, vanished surfaces, metal, paper, cardboard, fabric
Fabric/textiles Wood, plastic, vanished surfaces, metal, paper, cardboard, fabric/textiles
Measuring wheels are intended for use in conjunction with encoders, electronic or mechanical counters and process displays. Two sizes, either 20 cm or 50 cm circumference, and different surface profi les ensure optimum precision on any material.
Measuring wheels
imers,
Our entire portfolioBaumer has the perfect solution for every application.
Presence detection Inductive sensors Photoelectric sensors Ultrasonic sensors Capacitive sensors Magnetic sensors Precision mechanical switches
Distance measurement Inductive sensors Photoelectric sensors Ultrasonic sensors Linear encoders without bearings Cable-pull encoders
Angle measurement / rotary encoders Absolute encoders Incremental encoders HeavyDuty encoders Bearingless encoders Tachogenerators and resolvers Format alignment Speed switches Encoder combinations Inclination sensors
Identifi cation / image processing Industrial cameras Vision sensors
Process instrumentation Level measurement Temperature measurement Pressure measurement Conductivity measurement Force/strain sensors Counters and process displays
Samaratel. +7 846 273 95 [email protected]
Yekaterinburgtel. +7 343 287 19 [email protected]
St. Petersburgtel. +7 812 327 [email protected]
Moscowtel. +7 495 641 [email protected]
Helsinkitel. +358 9 540 [email protected]
Vilniustel. +370 5 215 [email protected]
Rigatel. +371 6738 [email protected]
Мinsktel. +375 17 200 [email protected]
Tallinntel. +372 668 [email protected]
Кievtel. +38 044 495 33 [email protected]
www.klinkmann.com
