Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Vendor: S000242
Page 1 of 11
ASSEMBLY INSTRUCTIONS
CORONA 3 DOOR WARDROBE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CORONA 3 DOOR
WARDROBE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations
On unpacking you may notice an odour due to the production process. This will disappear after a period of
time.
DO NOT place the item next to a radiator or direct sunlight. The item is manufactured in pine but is
susceptible to temperature change. It’s recommended an even room temperature be maintained with no
sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item, use a placemat or marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
To retreat the surface to maintain the original finish use block wax (un-perfumed) and follow the
manufacturer’s instructions carefully
DO NOT place the item onto wet or damp flooring as staining may occur to the floor
www.birlea.com
Vendor: S000242
Page 2 of 11
Vendor: S000242
Page 3 of 11
Parts List Hardware List (found in box 1)
Part Description Box Qty Part Description Qty
1 Right Panel 2 1 A 3.5 x 35 mm Screw 50
2 Left Panel 2 1 B 8 x 25 mm Wooden Dowel 39
3 Base Panel 1 1 C Stud 2
4 Base Frame 1 1 D 3/16 x 5/8 Bolt 3
5 Base Side Plinth 1 2 E 10 x 10 mm Tack 52
6 Base Front Plinth 1 1 F Handle 3
7 Top Panel 1 1 G 3.5 x 14 mm Black Screw 88
8 Top Shelf 1 1 H Hinge 9
9 Side Back Panel 2 2 I Connector 1 6
10 Left Frame 2 1 J Connector 2 6
11 Right Frame 2 1 K 4 x 45 mm Screw 9
12 Outer Top Frame 1 1 L Rail Support 2
13 Inner Top Frame 1 1 M Bracket 4
14 Top Side Plinth 1 2 O Shelf Support 12
15 Top Front Plinth 1 1 P 3.5 x 30 mm Screw 20
16 Spine 2 1 Q 8 x 40 mm Wooden Dowel 2
17 Hanging Rail 1 1 ** You will need a small mallet and a screwdriver
18 Left Door 2 1
19 Right Door 2 1
20 Door Stopper 2 2
21 Centre Frame 2 1
22 Centre Panel 2 1
23 Centre Back Panel 2 1
24 Centre Door 2 1
25 Side Shelf 1 3
26 Base Support 1 1
Vendor: S000242
Page 4 of 11
Step 1: Insert hardware parts A, B. Q and O using a small mallet (not provided). Attach hardware part L using
hardware part A and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000242
Page 5 of 11
Step 2: Attach the left frame (10) to the left panel (2), then attach the right frame (11) to the right panel (1)
using hardware part A. Attach the base side plinths (5) using hardware part A. Attach the top side plinths
(14) using hardware part P. You will need to use a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Fix the centre frame (21) to the centre panel (22) using hardware part A and a screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach the centre panel (22) to the top panel (7), top shelf (8) and base panel (3) using hardware
parts A and K with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000242
Page 6 of 11
Step 5: Attach the right panel (1) and left panel (2) using hardware part A and a screwdriver (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Connect the top front plinth (15), outer top frame (12) and inner top frame (13) using hardware
parts K and P. Secure hardware part M using hardware part G. You will need to use a screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach the assembled top frame using hardware part A and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000242
Page 7 of 11
Step 8: Attach the base support (26) using hardware part K. Secure hardware parts M in place using
hardware part G. You will need to use a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9: Attach the base plinth (6) using hardware part A and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 10: Secure the inner top frame using hardware part P and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000242
Page 8 of 11
Step 11: Attach hardware parts F, H and J to the right door (19) using hardware parts D and G with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 12: Attach hardware parts F, H and J to the left door (18) using hardware parts D and G with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000242
Page 9 of 11
Step 13: Attach hardware parts F, H and J to the centre door (24) using hardware parts D and G with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 14: Secure the doors to the frame using hardware part G and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000242
Page 10 of 11
Step 15: Insert the hanging rail (17) and side shelves (25). Secure hardware part I using hardware part G and
a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 16: Attach the door stoppers (20) using hardware part P and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000242
Page 11 of 11
Step 17: Position the side back panels (9) and centre back panel (23) with the spine (16) and secure using
hardware part E and P with a small mallet and screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 18: Insert hardware part C using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.