ControlR Interface Instructions

Thank you for purchasing an SRH ControlR Interface. Each unit is hand made using the finest

materials to produce a truly special and unique product for your enjoyment! Please read and

follow these instructions to ensure a simple fitment and ease of use.

INSTALLATION:

The ControlR comes complete with its own adjustable mounting brackets, these brackets are

height adjustable (Via the 4 Allen screws/slots) to enable the fitment of ‘add-on’ units. The

brackets have 4 mounting holes in the feet to secure the unit to your rig or desktop etc. Please

do not over tighten any of the bolts to avoid damage to your ControlR!

Once mounted, simply plug in the supplied USB lead to the ControlR and your PC and allow the

device driver software to install (a few moments). Your unit is now ready to use!

OPERATION:

The ControlR comes fully configured and is ready to use! The toggle switches send a ‘pulse’ or

button press every time they are operated (up OR down) and are far more realistic than

momentary switches. Rotary Encoders are ‘assigned’ in game the same way as buttons, just

turn left as one button and right as another.

ADD-ON UNITS

ControlR has been designed as a modular system that can be upgraded and added to by the

user in stages. We will release more information and add-on units for ControlR in the near

future and will include a Bottom Box unit and a Gauge Pack.

FINALLY

We would like to thank you again for purchasing your ControlR and assure you that as an SRH

customer, you have full technical backup and e-mail support just a message away! Feel free to

contact us via the contact page here: http://simracinghardware.com/contact-srh/ and we will get

back to you as quickly as possible!