Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
The Control Stitch nozzle air jets attenuate and actuate adhesive fibers to produce a tight stitch pattern, delivering superior control of hot melt adhesive for reliable product performance.
Controlled adhesive deposition delivers strong bonds at high line speeds for continuous or intermittent applications. Use of process air improves nozzle cleanliness and assists in pattern cutoff in intermittent applications. The configurable nozzles provide operating flexibility for single or multiple adjacent lines to meet stringent adhesive application requirements.
Nozzles are compatible with Universal™ series modules. These include UM22 and UM25 modules for less demanding intermittent operations, Speed-Coat® module for high-speed intermittent lines, UM50 module for continuous operations, and UM3 module for metering applications.
A serviceable, surface-mounted elastomeric o-ring prevents leaks. The patented Universal module screw applies uniform nozzle clamping for a positive hydraulic seal and thorough heating. Nozzles are easily cleaned and withstand repeated handling. Common Universal parts minimize inventory costs and simplify service.
Improve bond strength and product performance in nonwovens construction applications.
Control Stitch Nozzles
Control Stitch nozzles:
n Produce single or multiple fine-stitch beads in continuous or intermittent operation
n Deliver excellent pattern control
n Achieve strong, consistent bonds
Nordson Corporation11475 Lakefield DriveDuluth, GA 30097-1511
(800) 683-2314nordson.com/hotmelt
Control Stitch Nozzles
NWL-14-5847Reissued 2/14© 2014 Nordson CorporationAll Rights Reserved.Printed in U.S.A.Nordson reserves the right to make design changes between printings.
For more information, speak with your Nordson representative or contact your Nordson regional office.
United States
Duluth, Georgia
(800) 683-2314 Phone
(866) 667-3329 Fax
Europe
Luneburg, Germany
(49) 4131-894-0 Phone
(49) 4131-894-149 Fax
Japan
Tokyo, Japan
(81) 3-5762-2700 Phone
(81) 3-5762-2701 Fax
Asia/Australia/
Latin America
Amherst, Ohio
(440) 985-4496 Phone
(440) 985-1096 Fax
Find us on:
SpecificationsModule Compatibility All Universal modules
Materials of Construction1 Brass with hard-release coating
Nozzle Widths 22 and 25 mm
Nozzle Orifice Size2 0.46 mm (0.018 in.)
Nozzle to Substrate Distance 10 to 20 mm (0.38 to 0.79 in.) 15 mm (recommended)
Maximum Add-on Weight 14 g/min @ 300 m/min 10 g/min @ 400 m/min
Production Speed Capability 100 to 600 m/min (330 to 1,980 ft/min)
Adhesive Fiber Size 100 to 150 microns
Adhesive Viscosity (Recommended) 3,000 to 8,000 centipoise
Operating Temperature 70° to 205°C (160° to 400°F)
Maximum Hydraulic Flow 100 grams per minute per nozzle at 8,000 centipoise
Adhesive Flow 5 to 50 grams per minute per orifice
Air Consumption 0.50 to 1.0 scfm per nozzle
Air Pressure (Typical) 0.5 to 1.5 bar (7.5 to 22.5 psi)
Working Hydraulic Pressure 13.8 to 55.2 bar (200 to 800 psi)
Maximum Hydraulic Pressure 89.6 bar (1300 psi)
1Also available in stainless steel as an engineered special.2Other orifice sizes are available upon request as engineered specials.
Uniform stitch pattern delivers strong bondsand optimizes adhesive consumption.