Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
PUMPS PAGE CONTROLLERS PAGE
AA7 SERIES PUMP 12 BUFFER SOULTIONS 45AA9 SERIES PUMP 12 CHLORINE CONTROLLER 46AIR OPERATED DOUBLE DIAPHRAGM PUMPS 56 Liquitron 7000 series cooling/boiler controller NEW 43B1 SERIES PUMP 14 CONDUCTIVITY CONTROLLERS 43 44B7 SERIES PUMP 14 ORP CONTROLLERS 43 44 46B9 SERIES PUMP 14 ORP ELECTRODES 45 47C1 SERIES PUMP 16 pH & REDOX CONTROLLERS 45 47C7 SERIES PUMP 16C9 SERIES PUMP 16CENTRIFUGAL PUMPS 58 SYSTEMS & ACCESSORIESDRUM TRANSFER PUMPS 56G SERIES B PUMPS 38 BROMINATORS 54GA SERIES PUMPS 34 CALIBRATION CYLINDERS 73GM SERIES PUMPS 36 CHLORINE DIOXIDE GENERATION 60HAND TRANSFER PUMPS 58 CORPORATION STOP 30MAGNETIC COUPLED SEAL-LESS PUMPS 56 CORROSION SERPENTINES 71MILTON ROY INDUSTRIAL PUMPS 48 CORROSION TEST COUPONS 71MOTOR DRIVEN DOSING PUMPS 34 COUPON HOLDERS 71PD SERIES DOSING PUMPS NEW 8 FLOWMETERS ELECTRMAGNETIC 65Proteus SMART DIGITAL DOSING PUMPS 33 PINCH VALVES 68P0 SERIES DOSING PUMPS 4 POLYMATIC POLYMER MAKE DOWN SYSTEM 61P1 SERIES DOSING PUMPS 4 POLYPACK CS SERIES POWDER MAKE DOWN SYSTEMS 63P5 SERIES DOSING PUMPS 6 POLYPACK M 62PERISTALTIC PUMPS 50 PURGE VALVE ASSEMBLY 72ROYTRONIC EXCEL AD SERIES PUMPS 10 SAMPLE COOLERS 70ROYTRONIC P+0 SERIES PUMPS 3 STATIC MIXERS 64ROYTRONIC P+1 SERIES PUMPS 3 TIMER SINGLE SHOT 74TRANSFER DRUM PUMPS 56 58 TIMER SWITCHES DIGITAL 74WATER DRIVEN INJECTOR PUMPS 49 TIMER SWITCHES WEATHERPROOF 74WORLD PUMPS 58 SOLENOID VALVES 72
WATER METERS 66
DOSING ACCESSORIES & SPARESTANKS, BUNDS, ACCESSORIES & SPILL CONTAINMENT
ANTI-SYPHON VALVES 22 40AUTOPRIME DE-GASSING VALVES 22 AGITATORS - ELECTRIC HIGH SPEED 78DOSING POTS 55 AGITATORS - ELECTRIC SLOW SPEED GEARED 78ENCLOSURES 29 AGITATORS - HAND 78FLOW MONITORS 22 CAMLOCKS 82FOUR FUNCTION VALVE COUPLING KITS 300 BSP 20 IBC HEATER JACKET 82FOUR FUNCTION VALVES 20 IBC SPILL PALLETS 82G SERIES AUTOMATION FOR PROPORTIONAL DOSING 41 42 LEVEL CONTROLLERS 80HEAD ASSEMBLIES 18 19 LEVEL PROBES 80INJECTION ASSEMBLIES 30 LEVEL SWITCHES 80INJECTION QUILLS 30 LOW LEVEL SWITCH 80LIQUID END ASSEMBLIES 18 19 RIGID SUCTION LOW LEVEL ASSEMBLIES 80LIQUID END SERIES 300 BSP ACCESSORIES 20 21 SCHUTZ IBC ADAPTOR 83PRESSURE LOADING VALVES 40 SIGHT GLASSES 77PRESSURE RELIEF VALVES 40 SNAPLOCKS 82PULSATION DAMPENER 40 SPILL CONTAINMENT BUNDS 82 85PUMP MOUNTING ACCESSORIES 20 SPILL CONTAINMENT FLOORING 84PUMP SELECTION GUIDE LMI 2 SPILL CONTAINMENT KITS 85RODDING INJECTORS 30 TANKS & BUNDS 76ROYTRONIC FOUR FUNCTION VALVES 22SERIES 100 FOUR FUNCTION VALVES 20SERIES 300 BSP FOUR FUNCTION VALVES 20 MISCELLANEOUSSPARES KITS LMI SERIES 300 BSP LIQUID ENDS 3 to 17SPARES KITS PERISTALTIC PUMPS 53 CARRIAGE CHARGES 33SPARES KITS ROYTRONIC SERIES PUMPS 3 11 LMI PUMP SELECTION GUIDE 2SPARES KITS SERIES 300 BSP LMI B SERIES PUMPS 15 SELECTION GUIDE LMI PUMPS 2SPARES KITS SERIES 300 BSP LMI C SERIES PUMPS 17 TERMS & CONDITIONS 94SPARES KITS SERIES 300 BSP LMI P SERIES PUMPS 5 7SPARES KITS SERIES 600, 800 & 900 BSP LMI PD PUMPS 9SPARES KITS SERIES GA MOTOR DRIVEN 32 33SPARES KITS SERIES GM MOTOR DRIVEN 36 37SPARES KITS G SERIES B MOTOR DRIVEN 38 39STEGMANN ACTUATORS 42TUBE CONNECTION KITS 300 BSP 21TUBING 22TUBING DOUBLE WALLED CONNECTORS FOR 300 SERIES 28TUBING SPECIFICATION 28VARIPULSE MOTOR CONTROLLERS 41
CONTENTS
1 5 7
Diaphragm VersionP+X5 XP+X6 X
PX2 XPX3 XPX7 XPX4 X XPX5 X XPX6 X XPX8 X XPDX1 XPDX4 XPDX5 XPDX6 XAAX7 XAAX4 XAAX5 XAAX6 XADX1ADX4ADX5ADX6
BX1 X XBX2 X XBX3 X XBX4 X XCX0 X XCX1 X XCX2 X XCX3 X XCX4 X XJX4L XJX5L XJX6L X
Piston VersionX X
CXA5-XX12P X XCXA5-XX14P X XCXB5-XX10P X XCXB5-XX12P X XCXB5-XX14P X X
The character "X" defines the possible control code The Liquid end's type and the materials used are defined
The character "XX" defines the Liquid end material according to the liquid being pumped
(PVC or 316L) on Piston Pump Series
1 1001 100
1 1001 1001 100
50505050
Speed
Max spm
Min spm
1 2401 240
1 601 601 1001 1001 100
11
N/AN/AN/AN/A
0.0990.2710.4380.792
0.8 1600.8 1600.8 1600.8 160
XXXX
0.952.64.27.6
30.617.010.24.8
Max L/hr
Max Bar
Min ml/stroke
Max ml/stroke
Instantaneous W
Max Wh
X
Model
0 9
XX
Possible Control Modes
0.05 0.26 110 28
SPECIAL NOTES :
XX
XX 1 100
1 1001 100
7.6 1.4 0.25
X 76
XXXX
X
XX
XXX
XXX
X
XXXXXX
3.8 7.6
3.8 7.6
12 1.5
2.2 17
7.6 3.4
1.9 17.3
7.6 3.4
9.5 6.9
26.5
X
0.79 10.3 0.07 0.22 75 11
7.6 3.4 0.11 0.53 110 28
1.6 9.7 0.08 0.27 75 111.6 7.6 0.13 0.44 75
0.13 0.63 150 222.2 17.3 0.07 0.37 150 22
0.4 2 150 227.6 3.5 0.25 1.27 150 221 100
1 100
0.07 0.37 107 181.6 9.7 0.08 0.26 65 91
1100100
0.25 1.26 107 183.8 7.6 0.13 0.63 107 181
1100100
0.05 0.26 322 430.8 17.3 0.02 0.11 322 431
1120120
0.21 1.06 322 433.8 7.6 0.11 0.53 322 431
1120120
0.16 1.58 248 296 10.3 0.1 1 248 291
1100100
2 0.44 4.42 248 2917 3.4 0.28 2.83 248 291
1100100
9.5 10.3 0.16 1.58 420 564.9 20.7 0.08 0.81 420 561
1100100
0.27 108
34 4.2 0.57 5.05 420 5615.2 6.9 0.25 2.52 420 561
11
100100100
1 100
1.26 108 19
Output Pressure Volume Volume Power Consumption
193.8 4.1 0.13 0.63 108 19
1.75 1.26 12.6 420 561.6 9.7 0.08
CXA5-XX10P X0.921.221.131.6121.4
40255040
0.64 50 0.011 0.11 420 56
LMI PUMP SELECTION GUIDE
420420420420420
5656565656
0.150.2
0.190.270.3625
0.0150.02
0.0190.0270.036
X
LMI22 LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
P+0 Range Features : AVAILABLE FOR A LIMITED TIME ONLYAdjustable Stroke size 20 to 100% Supplied with Injection Valve, Foot Valve,
Suction Lift 1.5m 4FV depending on model, & 6m of MDPE
IP65 Housing Tubing (Except 316 SS & HV versions)
50 degrees C max dose temp Double ball check valves
Fast Prime Liquid end with Transparent facia protector
bleed port
P+1 Range Features extra to P+0 :Adjustable Stroke frequency 0 - 240 SPM
Model Numbering Example
P+ 0 5 5 - N X
Output Code Liquid End Assembly Tubing TypePump Series Control Code Voltage Code Valve Accessory
Control Codes : 0 = Manual Stroke ; 1 = Manual Speed & Stroke Liquid End Options : See Table Below
Output Codes : See Table Below Valve Accessory : N = Without Valve S = 4FV
Voltage Codes : 8 = 110V without plug ; 5 = 240V with UK plug Tubing Type : 2 = Imperial, 3 = Metric, 4 = Reinforced PVC (6 x 12mm)
PUMP RANGE & PRICING
P+055 180.0 ml to 3.8L/hr P+155 3.00 ml to 3.8L/hr Size Code 7.6 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
920NX ACRYLIC ceramic PVDF AFLAS OPT 0.375" RPM-822 105.00£
P+065 396.0 ml to 7.6L/hr P+165 6.00 ml to 7.6L/hr Size Code 3.4 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
930NX ACRYLIC ceramic PVDF AFLAS OPT 0.375" RPM-832 103.00£
ACCESSORIES
PRICE
£102.00
£102.00
PART NUMBER DESCRIPTION
48754
48799
4 Function Valve for Roytronic Series Low Pressure (For Liquid Ends: 832, 838, 842, 848, 910A, 920A, 930 & 940)
4 Function Valve for Roytronic Series High Pressure (For Liquid Ends 812, 818, 822, 828, 910, & 920)
£451.00 £501.00
Rings
Prices Materials Valve or Seal
P+065 P+165
RingsP+055 P+155
£431.00
LMI Roytronic SERIES P+ Dosing Pumps
920
Prices Materials Valve or Seal
£480.00
WILL BE REPLACED BY PD SERIES PUMPS
3LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
P0 Range Features : AVAILABLE FOR A LIMITED TIME ONLY
Output 135ml to 12L/hr Stroke Adjustment with fixed Speed
Pressure upto 17.3 bar
Suction Lift 1.5m
IP65 Housing
240 Volt & 110 Volt versions
Imperial & metric fittings available
Supplied with Injection Valve, Foot Valve, 4FV depending on model
& 6m of MDPE Tubing (Except 316 SS & HV versions)
P1 Range Features extra to P0 : AVAILABLE FOR A LIMITED TIME ONLY
Output 2.25ml to 12L/hr
Speed Adjustment
P 0 5 5 - S 2Tubing Type
Valve Accessory
Liquid End Assembly
Voltage Code
Output Code
Control Code
Pump Series
Control Codes : 0 = Manual Stroke Only 1 = Manual Speed & Stroke 5 = External Pulse
Output Codes : See Adjacent Table (NB Codes 2 & 3 are 60 spm maximum)
Voltage Codes : 1 = 110V 5 = 240V
Liquid End Options : See Adjacent Table
Valve Accessory : S = 4 function valve T = 3 FV N = Without Valve
Tubing Type : 2 = Imperial 3 = Metric 4 = Reinforced PVC (6 x 12mm)
LMI SERIES P Dosing Pumps
Model Numbering Example
390
WILL BE REPLACED BY PD SERIES PUMPS
LMI24 LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
P02X 135.0 ml to 0.75 L/hr P12X 2.25ml to 0.79 L/hr Size Code 0.5 10.3 Bar
Liquid Accs.
End Valve
358S2 PVDF AFLAS 4 FV
352S2 PVDF AFLAS 4 FV
350S2 PVDF AFLAS 4 FV
257 316 SS N/A
P03X 288.0 ml to 1.6 L/hr P13X 4.8ml to 1.6 L/hr Size Code 0.9 7.6 Bar
Liquid Accs.
End Valve
398S2 PVDF AFLAS 4 FV
392S2 PVDF AFLAS 4 FV
390S2 PVDF AFLAS 4 FV
85HV PTFE OPT
297 316 SS N/A
P04X 440.0 ml to 2.2 L/hr P14X 4.4ml to 2.2 L/hr Size Code 0.5
Liquid Accs.
End Valve
358S2 PVDF AFLAS 4 FV
352S2 PVDF AFLAS 4 FV
350S2 PVDF AFLAS 4 FV
155HV PTFE OPT
257 316 SS N/A
P05X 760.0 ml to 3.8 L/hr P15X 7.6ml to 3.8 L/hr Size Code 0.9
Liquid Accs.
End Valve
398S2 PVDF AFLAS 4 FV
392S2 PVDF AFLAS 4 FV
390S2 PVDF AFLAS 4 FV
85HV PTFE OPT
297 316 SS N/A
P06X 1.52 to 7.6L /hr P16X 15.2ml to 7.6 L/hr Size Code 1.8
Liquid Accs.
End Valve
368S2 PVDF AFLAS 4 FV
362S2 PVDF AFLAS 4 FV
360S2 PVDF AFLAS 4 FV
75HV PTFE OPT
277 316 SS N/A
P08X 2.4 to 12L /hr P18X 24ml to 12 L/hr Size Code 1.8
Liquid Accs.
End Valve
368N2 PVDF AFLAS N/A
362N2 PVDF AFLAS N/A
360N2 PVDF AFLAS N/A
75HV PTFE OPT
277 316 SS N/A316 SS
Valves / Seal Rings
Tubing
Sizes
0.375" 131.00£
Materials
Balls
ceramic
ceramic
ceramic
316 SS
316 SS
Prices
1.5 Bar
1/4NPT
3.4 Bar
131.00£
131.00£
131.00£
1/4NPT
316 SS
316 SS
POA
Valves / Seal Rings
Tubing
131.00£
131.00£
119.00£
Spares Kit
No.
RPM362-DMR
RPM362-DMR
RPM362-DMR
SP-75HV
POA
Price
0.375"
0.375"
0.5"
1/4NPT
119.00£
Sizes
0.375"
0.375"
0.375"
0.5"
PriceSpares Kit
No.
RPM362-DMR
RPM362-DMR
RPM362-DMR
SP-75HV
POA
Prices
P05X P15X
677.00£
700.00£
ceramic
ceramic
ceramic
0.250"
0.250"
0.5"
1/4NPT
583.00£
616.00£
Valves / Seal Rings
Materials
BallsHead/Fitting
0.375"
0.375"
0.375"
0.5"
7.6 Bar
RPM392-DMR
SP-85HV
Tubing
SizesPrice
Spares Kit
No.
RPM392-DMR
RPM392-DMR
131.00£
131.00£
131.00£
119.00£
Balls
ceramic
PVDF/PVDF
Acrylic/PVC
PP/PP
902.00£ 316 S/316 S
N/A
857.00£
627.00£
661.00£
689.00£
ceramic
ceramic
316 SS
316 SS
No.
RPM352-DMR
RPM352-DMR
RPM352-DMR
SP-155HV
POA
Price
131.00£
131.00£
131.00£
119.00£
96.00£
96.00£
119.00£
Spares Kit
No.
0.375"
0.375"
0.375"
0.5"
1/4NPT
RPM392-DMR
RPM392-DMR
316 SS
96.00£
Tubing
Sizes
0.250"
578.00£ 628.00£ Acrylic/PVC
N/A 316 SS
PVC/PVC
653.00£ PP/PP
836.00£ 885.00£ 316 S/316 S
599.00£
P04X P14X Head/FittingValves
/ Seal Rings
554.00£
17.3 Bar
Spares Kit
Price
Price
Valves / Seal Rings
Valves / Seal Rings
MaterialsPrices
RPM392-DMR
SP-85HV
POA
Tubing
Sizes
0.250"
0.250"
0.250"
1/4NPT
Spares Kit
No.
RPM352-DMR
RPM352-DMR
RPM352-DMR
POA
Tubing
Sizes
ceramic
96.00£
96.00£
96.00£
PVDF/PVDF
Acrylic/PVC
316 S/316 S
Balls
ceramic
ceramic
ceramic
316 SS
Materials
P02X P12X Head/Fitting
499.00£ 549.00£ PVC/PVC
Prices
530.00£ 580.00£
568.00£ 618.00£
509.00£ 559.00£ PVC/PVC
540.00£ 590.00£ PVDF/PVDF
P03X P13X Head/Fitting
Prices Materials
Balls
ceramic
836.00£
ceramic
885.00£
P06X P16X Head/Fitting
575.00£ 620.00£ PVC/PVC
909.00£
PVC/PVC
PVDF/PVDF
Acrylic/PVC
PP/PP
316 S/316 S
705.00£
PVDF/PVDF
PP/PP
Acrylic/PVC
PP/PP
869.00£ 1,016.00£ 316 S/316 S
480.00£ 530.00£ PVC/PVC
Prices
P08X P18X Head/Fitting
Materials
Balls
ceramic
ceramic
ceramic
316 SS
863.00£ 913.00£ 316 S/316 S
570.00£ 615.00£
598.00£
632.00£
N/A
864.00£
643.00£
512.00£ 562.00£ PVDF/PVDF
550.00£
N/A
599.00£
681.00£
Acrylic/PVC
604.00£
637.00£
N/A
648.00£
682.00£
5LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
P5 Range Features : AVAILABLE FOR A LIMITED TIME ONLY
Output 4.8ml to 12L/hr
Pressure upto 17.3 bar
Speed Adjustment
Low level LED indication with pump shut off.
External Pulse control
Suction Lift 1.5m
IP65 Housing
240 Volt & 110 Volt versions
Imperial & metric fittings available
Supplied with Injection Valve, Foot Valve, 4FV
depending on model & 6m of MDPE Tubing
(Except 316 SS & HV versions)
-Tubing Type
Valve Accessory
Liquid End Assembly
Voltage Code
Output Code
Control Code
Pump Series
Control Codes : 0 = Manual Stroke Only 1 = Manual Speed & Stroke 5 = External Pulse
Output Codes : See Adjacent Table (NB Codes 2 & 3 are 60 spm maximum)
Voltage Codes : 1 = 110V 5 = 240V
Liquid End Options : See Adjacent Table
Valve Accessory : S = 4 function valve T = 3 FV N = Without Valve
Tubing Type : 2 = Imperial 3 = Metric 4 = Reinforced PVC (6 x 12mm)
Model Numbering Example
P 5 5 5 S 2
LMI SERIES P Dosing Pumps
WILL BE REPLACED BY PD SERIES PUMPS
390
LMI26 LMI ELECTROMAGNETIC DOSING PUMPS
LMI CATALOGUE 2019 LMI
P57X 4.8ml to 1.6 L/hr Size Code 0.5 9.7 Bar
P54X 4.4ml to 2.2 L/hr Size Code 0.5 17.3 Bar
P55X 7.6ml to 3.8 L/hr Size Code 0.9 7.6 Bar
P56X 15.2ml to 7.6 L/hr Size Code 1.8 3.4 Bar
P58X 24ml to 12 L/hr Size Code 1.8 1.5 Bar
277
Prices MaterialsValve / Seal Rings
Liquid
316 S/316 S
P58X
669.00£
700.00£
738.00£
819.00£
1,051.00£
ceramic
ceramic
ceramic
316 SS
316 SS
Head/Fitting
PVC/PVC
PVDF/PVDF
Acrylic/PVC
PP/PP
PVDF
OPT
N/A
Tubing
Sizes
0.375"
0.375"
0.375"
0.5"
PVDF
PVDF
PTFE
316 SS
AFLAS
AFLAS
AFLAS
1/4NPT
N/A
119.00£
Spares Kit
No.
RPM362-DMR
RPM362-DMR
RPM362-DMR
SP-75HV
POA
Price
131.00£
131.00£
131.00£
Valve / Seal RingsMaterials
316 SS
316 SS
Head/Fitting
PVC/PVC
PVDF/PVDF
Acrylic/PVC
PP/PP
316 S/316 S
Balls
ceramic
ceramic
368S2
362S2
360S2
75HV
277
Accs.
Valve
N/A
N/A
ceramic
PVDF
PVDF
PVDF
PTFE
316 SS
4 FV
4 FV
OPT
N/A
AFLAS
AFLAS
AFLAS
POA
Tubing
Sizes
0.375"
0.375"
0.375"
0.5"
1/4NPT
131.00£
119.00£
Spares Kit
No.
RPM362-DMR
RPM362-DMR
RPM362-DMR
SP-75HV
Price
131.00£
131.00£
Accs.
Valve
4 FV
BallsP55X
PricesLiquid
EndPrice
PVC/PVC
PVDF/PVDF
Acrylic/PVC
PP/PP
316 S/316 S
739.00£ AFLAS
AFLAS
AFLAS
768.00£
801.00£
824.00£
1,033.00£
PVDF
PVDF
PVDF
PTFE
316 SS
ceramic
ceramic
ceramic
316 SS
316 SS
Tubing
Sizes
0.375"
0.375"
0.375"
0.5"
1/4NPT
4 FV
4 FV
4 FV
OPT
N/A
Accs.
Valve
131.00£
131.00£
131.00£
119.00£
Spares Kit
No.
RPM392-DMR
RPM392-DMR
RPM392-DMR
SP-85HV
POA
PricesLiquid
End
Valve / Seal RingsMaterials
316 S/316 S
P54X
724.00£
752.00£
786.00£
813.00£
1,027.00£
ceramic
ceramic
ceramic
316 SS
316 SS
Head/Fitting
PVC/PVC
PVDF/PVDF
Acrylic/PVC
SP-155HVPP/PP
N/A
AFLAS
AFLAS
AFLAS
Accs.
Valve
4 FV
4 FV
4 FV
OPT
MaterialsPrice
96.00£
96.00£
96.00£
119.00£
PVC/PVC
PVDF/PVDF
Acrylic/PVC
316 S/316 S
POA
Tubing
Sizes
0.250"
0.250"
0.250"
0.5"
1/4NPT
Spares Kit
No.
RPM352-DMR
RPM352-DMR
RPM352-DMR
AFLAS
RPM352-DMR
POA
Tubing
Sizes
0.250"
0.250"
0.250"
1/4NPT
Spares Kit
No.
RPM352-DMR
RPM352-DMRAFLAS
398S2
P57X
714.00£
746.00£
Accs.
Valve
4 FV
4 FV
4 FV
N/A
Valve / Seal RingsBallsHead/Fitting
Materials
PVDF
PVDF
PVDF
316 SS
ceramic
ceramic
ceramic
316 SS
AFLAS
PricesPrice
96.00£
96.00£
96.00£
360N2
75HV
368N2
362N2
BallsEnd
830.00£
1,039.00£
773.00£
807.00£
P56X
745.00£
End
297
PricesLiquid
390S2
85HV
257
784.00£
1,051.00£
392S2
Head/Fitting
155HV
257
352S2
350S2
PVDF
Valve / Seal RingsBalls
PVDF
PVDF
PTFE
316 SS
358S2
Liquid
End
358S2
352S2
350S2
7LMI ELECTROMAGNETIC DOSING PUMPSLMI CATALOGUE 2019L
MI
Introducing the PD Series Chemical Metering Pump
Designed specifically for water treatment applications, the newly redesigned PD series pump adds advanced technology to one of LMI's most popular pumps. Available in two models, Manual and Enhanced, the PDSeries pump fits seamlessly into your water treatment process whilst adding convenience and value to your application
PD0 Range Features : Advanced Electronics with dynamic compensation for
temperature and voltage conditions
Improved Drive Design Dual Voltage : 110/240V
Fast Prime as Standard Speed Adjustment only
Output 4.8ml to 7.6L/hr 0.8 - 160 spm;
200:1 turn down : IP65 Housing
+/- 3% accuracy/repeatability Suction Lift 1.5m
Pressure upto 30.6 bar Imperial & metric fitting
Liquid & Ambient Temperature between -10 & 500C
Supplied with Injection Valve, Foot Valve &
6m of MDPE Tubing (Except 316 SS versions)
PD7 Range Features extra to PD0 :
Output 4.8ml to 7.6L/hr Speed Adjustment only
External Control Inputs :
pulse, stop/start & level indication
LCD Graphical display: for intuitive navigation to configure, operate and view status from a distance
Calibration Assist :
Allows simple calibration adjustment on screen
StayPrime Degassing Technology :
Automates the priming cycle after a period of idle time
System & User Totalisers : Logs pump strokes, estimated
volume and power cycles, indicates when service due.
Due to the improved drive mechanism this range will generate greater pressure than the original P series pumps, please be advised to consider a suitable safety pressure relief valve if your application discharge lines are at risk of blockage or closure.These are available in a range of materials on page 40 and can be adjusted to your required pressure
NEW LMI SERIES PD Dosing Pumps NEW
This Range will be replacing the P0, P+0, P1 & P+1 Ranges of PUMPS
This Range will be replacing the P5 & AA7 Ranges of PUMPS
LMI28 LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
PD 0 4 5 - N 2Tubing Type
Pump Series Output Code Valve Accessory
Control Code Cord Code Liquid End Assembly
Control Codes : 0 = Manual Speed Only 7 = External Pulse
Output Codes : See Tables Below
Cord Codes : 5 = 220 - 240V UK plug attached
Liquid Ends : See Tables Below
Valve Accessory : N = Fast Prime No 4FV A = Autoprime no 4FV
Tubing Type : 2 = Imperial 3 = Metric P = Pipe (1/4" NPT, 316SS Only)
PDX15 4.8 ml to 0.95L/hr Size Code 0.2 30.6 Bar
Liquid Accs.
End Valve
907NP 316 SS N/A
PDX45 13.0 ml to 2.6L/hr Size Code 0.4 17.0 Bar
Liquid Accs.
End Valve
828N2 PVDF AFLAS 4 FV
A28A2 PVDF AFLAS 4 FV
822N2 PVDF AFLAS 4 FV
920N2 PVDF AFLAS 4 FV
A20A2 PVDF AFLAS 4 FV
927NP 316 SS N/A
PDX55 21.0 ml to 4.2L/hr Size Code 0.8 10.2 Bar
Liquid Accs.
End Valve
838N2 PVDF AFLAS 4 FV
A38A2 PVDF AFLAS 4 FV
832N2 PVDF AFLAS 4 FV
930N2 PVDF AFLAS 4 FV
A30A2 PVDF AFLAS 4 FV
937NP 316 SS N/A
PDX65 38.0 ml to 7.6L/hr Size Code 1.6 4.8 Bar
Liquid Accs.
End Valve
848N2 PVDF AFLAS 4 FV
A48A2 PVDF AFLAS 4 FV
842N2 PVDF AFLAS 4 FV
940N2 PVDF AFLAS 4 FV
A40A2 PVDF AFLAS 4 FV
947NP 316 SS N/A
754.00£ 887.00£ 316 S/316 S 316 SS
PD745 Head/Fitting Balls
PD015 PD715 Head/Fitting
PricePD065 PD765
769.00£ 902.00£ 316 S/316 S
Head/Fitting
0.375"
Balls Sizes
186.00£
Prices
136.00£
283.00£
283.00£ 821.00£ 688.00£
103.00£
103.00£
705.00£ PVDF/PVDF ceramic 0.375" RPM832 103.00£
688.00£ 821.00£
518.00£ 672.00£ PVC/PVC ceramic 0.375"
PVC/PVC 0.375"
0.375"
588.00£ 756.00£ Acrylic/PVC ceramic 0.375" RPM832
573.00£
754.00£ 887.00£ 316 S/316 S 316 SS 1/4NPT RPM927
ceramic RPM-A30A
RPM832
Acrylic/PVC ceramic
518.00£ 672.00£ PVC/PVC ceramic
316 SS 1/4NPT RPM937
RPM842
No.
Materials Valves / Seal Rings
Tubing Spares Kit
RPM-A30A
206.00£
136.00£
688.00£ 821.00£ Acrylic/PVC ceramic 0.375" RPM-A40A 283.00£
769.00£ 902.00£ 316 S/316 S 316 SS 1/4NPT RPM947
588.00£ 756.00£ Acrylic/PVC ceramic 0.375" RPM842
573.00£ 705.00£ PVDF/PVDF ceramic 0.375" RPM842 136.00£
0.375" RPM-A40A 283.00£ 688.00£ 821.00£ PVC/PVC ceramic
PricePD055 PD755 Head/Fitting Balls Sizes No.
Prices Materials Valves / Seal Rings
Tubing Spares Kit
171.00£
608.00£
806.00£
Acrylic/PVC ceramic 0.250" RPM822
673.00£
741.00£
Acrylic/PVC ceramic 0.250" 283.00£ RPM-A20A
RPM822 105.00£
673.00£
105.00£
PVC/PVC ceramic
Sizes No.
490.00£ 657.00£ PVC/PVC ceramic 0.250" RPM822 105.00£
0.250" 283.00£
690.00£ PVDF/PVDF ceramic
RPM-A20A
558.00£
806.00£
0.250"
Model Numbering Example
828
Prices Materials Valves / Seal Rings
Tubing Spares KitPrice
PD045
1/4NPT RPM907 179.00£
Balls Sizes No.
Prices Materials Valves / Seal Rings
Tubing Spares KitPrice
9LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
AD8 Range Features :Output 0.02ml to 7.6L/hr IP65 Housing
Pressure upto 17.3 bar Double ball check valves
Digital Flow rate display Suction Lift 1.5m
Universal 95 - 240V 1 SPH TO 120 SPM
Transparent facia protector Remote on/off
Batch Accumulation
Fast Prime Liquid End & bleed port
Auto-prime de-gassing liquid ends (USE SUFFIX "A")
Imperial & metric fittings available
Includes Injection & Foot Valves, 6m of MDPE Tubing
(Except 316 SS & HV versions)
Pulse multiply/divide function
AD9 Range Features extra to AD8 :
Flow monitoring with FM-ROY-9
Built in 7 day timer;
Programmable 4-20mA/pulse control
4-20mA Output
Remote control of internal/external switching
Alarm contact
AD 9 1 5 - S 2
Pump Series Output Code Tubing Type
Control Code Voltage Code Liquid End Assembly Valve Accessory
Control Codes : 8 = Manual + External Pulse & 4-20mA 9 = Programmable 4 -20 mAOutput Codes : See Adjacent Table Voltage Codes : 3 = 95 - 240V (CE plug) 5 = 95 - 240V (UK plug)Liquid Ends : See Adjacent TableValve Accessory : S = 4 function valve N = No Valve A = Degas No Valve H = Degas with 4FVTubing Type : 2 = Imperial 3 = Metric 4 = Reinforced PVC (6 x 12mm)
LMI SERIES AD Programmable Dosing Pumps
Model Numbering Example
818
LMI2 LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
1010
PUMP RANGE & PRICING
ADX15 0.02 ml to 0.8 L/hr Size Code 0.2 17.3 Bar
Accs. Tubing Spares Kit
Balls Valve Sizes No.
ceramic 4 FV 0.250" RPM-812
ceramic 4 FV 0.250" RPM-812
ceramic 4 FV 0.250" RPM-812
ceramic 4 FV 0.250" RPM-910A316 SS N/A 1/4NPT RPM-917
ADX45 0.05 ml to 1.9 L/hr Size Code 0.4 17.3 Bar
Accs. Tubing Spares Kit
Balls Valve Sizes No.ceramic 4 FV 0.250" RPM-822ceramic 4 FV 0.250" RPM-822ceramic 4 FV 0.250" RPM-822ceramic 4 FV 0.250" RPM-920A316 SS OPT 0.5" RPM-624316 SS N/A 1/4NPT RPM-927
ADX55 0.11 ml to 3.8 L/hr Size Code 0.8 7.6 BarAccs. Tubing Spares Kit
Balls Valve Sizes No.ceramic 4 FV 0.375" RPM-832ceramic 4 FV 0.375" RPM-832ceramic 4 FV 0.375" RPM-832ceramic 4 FV 0.375" RPM-930A316 SS OPT 0.5" RPM-634316 SS N/A 1/4NPT RPM-937
ADX65 0.21 ml to 7.6 L/hr Size Code 1.6 3.4 BarAccs. Tubing Spares Kit
Head/Fitting Balls Valve Sizes No.ceramic 4 FV 0.375" RPM-842ceramic 4 FV 0.375" RPM-842ceramic 4 FV 0.375" RPM-842ceramic 4 FV 0.375" RPM-940A316 SS OPT 0.5" RPM-644316 SS N/A 1/4NPT RPM-947
ACCESSORIES
Price£147.00
£102.00
£102.00
910S2
910A2917
Prices
AD815
734.00£
769.00£
821.00£
821.00£ 902.00£
Liquid
End828S2822S2920S2920A2624V927
Prices
AD845828.00£ 862.00£ 914.00£ 914.00£ 892.00£ 997.00£
LiquidEnd
838N2832N2930N2930A2634V937
PricesAD855
757.00£ 757.00£ 852.00£ 920.00£ 898.00£
1,003.00£
848N2842N2940N2940A2644V947
LiquidEnd
PricesAD865
771.00£ 771.00£ 858.00£ 925.00£ 903.00£
1,008.00£
Prices
PVDFPVDFPVDFPVDFPTFE
316 SS
AFLASAFLASAFLASAFLASPTFEPTFE
1,067.00£ 1,172.00£ 316 S/316 S
1,022.00£ Acrylic/PVC1,089.00£ Acrylic/PVC
935.00£ PVC/PVC970.00£ PVDF/PVDF
136.00£ 164.00£ 106.00£ 206.00£
PVDFPVDFPVDFPVDFPTFE
316 SS65.00£
186.00£
Price
136.00£ 136.00£
AFLASAFLASAFLASAFLAS
Valve or Seal
PTFEPTFE
Price
103.00£ 103.00£ 103.00£ 106.00£
316 SS
Valve or Seal
49.00£ 171.00£ PTFE
Valve or Seal
AFLASAFLASAFLASAFLASPTFE
PVDFPVDF
Price
105.00£ 105.00£ 105.00£ 103.00£
PVDFPVDFPTFE
AFLAS
AFLAS
AFLASPTFE
Valve or Seal
PVDF
PVDF
PVDF316 SS
AD915 Head/Fitting
177.00£
Price
119.00£
119.00£
119.00£
110.00£ 1,066.00£ 316 S/316 S
AFLASPVDF
Liquid
End
818S2
812S2
48754 AD9 4 FV Low Press (LE's: 832, 838, 842, 848, 910A, 920A, 930 & 940)
48799 AD9 4 FV High Press (LE's: 812, 818, 822, 828, 910, & 920)
48413 AD9 Level Switch, float type. Stops the pumps on low levelPart Number Pump Model Description
PP/PP
PVDF/PVDF
AD965Materials
1,062.00£ PP/PP1,167.00£ 316 S/316 S
1,016.00£ Acrylic/PVC1,084.00£ Acrylic/PVC
930.00£ PVC/PVC964.00£ PVDF/PVDF
AD955 Head/FittingPrices
1,056.00£ 1,161.00£ 316 S/316 S
1,078.00£ Acrylic/PVC1,078.00£ Acrylic/PVC
Materials
Prices Materials
Prices
AD945 Head/Fitting992.00£ PVC/PVC
1,026.00£
Materials
PP/PP
985.00£ Acrylic/PVC
985.00£ Acrylic/PVC
898.00£ PVC/PVC
933.00£ PVDF/PVDF
LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
1111
AA7 Range Features : AVAILABLE FOR A LIMITED TIME ONLY
Mantual Speed & Stroke Adjustment plus external pulse control
Output 21ml to 7.6L/hr
Can be converted to 4-20mA input.
240 Volt & 110 Volt versions
Imperial & metric fittings available
Dims: (L) 325 x (W) 235 x (H) 290 (mm)
Low Level alarm indication and auto cut off when used with level switch
Suction Lift 1.5m
Pressure upto 17.3 bar
IP65 Housing
Control panel protection
Packing Weight : 4.5Kg
Includes Injection & Foot Valves, 6m of MDPE Tubing
(Except 316 SS & HV versions)
POLYBLEND VERSIONS AVAILABLE ON REQUEST
AA9 Range Features extra to AA7 :
Microprocessor, programmable pump
Output 0.07ml to 7.6L/hr
Proportional control by 4 - 20mA analog signal
Integrated pulse divide/multiply functions
Adjustable Stroke Frequency from 1 sph to 100 spm
Flow monitoring with alarm output when used with FM-459
Digipulse monitor
Includes 4 pin cable for external pulse control and 8 pin cable
for 4 - 20mA control
Remote stop/start
Adjustable pressure capacity
AA 9 7 8 - S 2
Pump Series Output Code Tubing Control Code Voltage Code Liquid End Assembly Valve Accessory
Control Codes : 7 = Manual Speed & Stroke + External Pulse 9 = Programmable 4 -20 mA
Output Codes : See Adjacent Table
Voltage Codes : 8 = 110V 5 = 240V
Liquid End Options : See Adjacent Table
Valve Accessory : S = 4 function valve T = 3 FV N = Without Valve
Tubing Type : 2 = Imperial 3 = Metric 4 = Reinforced PVC (6 x 12mm)
WILL BE REPLACED BY THE ROYTRONIC AD SERIES
LMI SERIES AA Dosing Pumps
350
Model Numbering Example
LMI2 LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
12
PUMP RANGE & PRICING
AA77X 24.0 ml to 1.56 L/hr AA97X 0.08ml to 1.56 L/hr Size Code 0.5 9.7 Bar
Liquid Accs. Tubing Spares Kit Price
End Valve Sizes No.
358S2 PVDF AFLAS 4 FV 0.250" RPM352-DMR 96.00£
352S2 PVDF AFLAS 4 FV 0.250" RPM352-DMR 96.00£
350S2 PVDF AFLAS 4 FV 0.250" RPM352-DMR 96.00£
155HV PTFE OPT 0.5" SP-155HV 113.00£
257 316 SS N/A 1/4NPT POA
AA74X 21.0 ml to 2.22 L/hr AA94X 0.07ml to 2.22 L/hr Size Code 0.5 17.3 Bar
Liquid Accs. Tubing Spares Kit Price
End Valve Sizes No.
358S2 PVDF AFLAS 4 FV 0.250" RPM352-DMR 96.00£
352S2 PVDF AFLAS 4 FV 0.250" RPM352-DMR 96.00£
350S2 PVDF AFLAS 4 FV 0.250" RPM352-DMR 96.00£
155HV PTFE OPT 0.5" SP-155HV 113.00£
257 316 SS N/A 1/4NPT POA
AA75X 39.0 ml to 3.78 L/hr AA95X 0.13ml to 3.78 L/hr Size Code 0.9 7.6 Bar
Liquid Accs. Tubing Spares Kit Price
End Valve Sizes No.
398S2 PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
392S2 PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
390S2 PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
85HV PTFE OPT 0.5" SP-85HV 119.00£
297 316 SS N/A 1/4NPT POA
AA76X 75.0 ml to 7.56 L/hr AA96X 0.25ml to 7.56 L/hr Size Code 1.8 3.5 Bar
Liquid Accs. Tubing Spares Kit Price
End Valve Sizes No.
368S2 PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
362S2 PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
360S2 PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
75HV PTFE OPT 0.5" SP-75HV 119.00£
277 316 SS N/A 1/4NPT POA
Price£29.00
£24.00
£31.00
£361.00
AA9
AA9
Description2m, 4 pin, 2 wire cable for external pulse control
3m, 4 pin, 4 wire cable for external pulse control
3m, 8 pin, 8 wire cable for 4-20mA external control
Digi-Pulse Flow monitor for 300 series, upto 30L/hr
28368
33796
33738
FM-459
Part Number Pump ModelAA7
AA9
Prices
Prices
316 SS
Head/Fitting
PVC/PVC
PVDF/PVDF
Acrylic/PVC
PP/PP
316 S/316 S
1,052.00£
1,284.00£
AA96X
1,158.00£
1,190.00£
1,227.00£
1,253.00£
1,485.00£
989.00£
1,027.00£
Head/Fitting
PVC/PVC
PVDF/PVDF
Acrylic/PVC
PP/PP
AA76X
316 S/316 S
ceramic
ceramic
316 SS
Rings
Prices Valve or SealMaterials
Balls
ceramic
1,479.00£ 1,278.00£
958.00£
ceramic
ceramic
ceramic
316 SS
316 SS
RingsBalls
Materials
1,034.00£
1,271.00£
1,234.00£
1,472.00£
AA95XAA75X
316 SS
316 SS
1,152.00£
1,221.00£
1,221.00£
1,247.00£
952.00£
983.00£
1,021.00£
1,046.00£
966.00£
1,003.00£
AA94X
1,135.00£
1,166.00£
1,204.00£
Rings
ceramic
ceramic
Head/Fitting
PVC/PVC
Balls
ceramic
1,182.00£ 1,382.00£
Materials
AA97X
1,045.00£
1,077.00£
1,114.00£
Valve or Seal
PVC/PVC
PVDF/PVDF
Acrylic/PVC
PP/PP
316 S/316 S
PVDF/PVDF
Acrylic/PVC
PP/PP
316 S/316 S
ceramic
ceramic
316 SS
316 SS
Valve or Seal
AA74X
934.00£
RingsHead/Fitting
1,145.00£
Prices Valve or Seal
Balls
ceramic
Materials
AA77X
845.00£
876.00£
914.00£
944.00£
LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
13
B1 Range Features :
Manual Control with variable speed and stroke size
Output 13ml to 26L/hr
Pressure upto 10.3 bar
Stroke Indicator Light
IP65 Housing
240 Volt & 110 Volt versions
Imperial & metric fitting available
Supplied with Injection Valve, Foot Valve
& 6m of MDPE Tubing (Except 316 SS & HV versions)
B7 Range Features extra to B1 :
Manual Control or External Pulse Control
6- Level pressure control, reduces noise, shock & vibration
Low level indication with pump shut off.
Can be used with LMI Micropace devices for 4-20mA control,
pulse multiply & divide
B9 Range Features extra to B7 :
Microprocessor controlled
Output 0.1 ml to 26L/hr
LCD screen with 4-key Tactile Keypad
1 sph to 100 spm
3 external control modes; pulse divide, pulse multiply or 4-20mAProgrammable 0-20mA from 0 - 100 spmFlow monitoring enabled with alarm output. (accessory required)
Model Numbering Example
B 1 4 5 - N 2Tubing Type
Valve Accessory
Liquid End Assembly
Voltage Code
Output Code
Control Code
Pump Series
Control Codes : 1 = Manual Adjustment 7 = External Pulse 9 = Programmable
Output Codes : See Adjacent Table
Voltage Codes : 1 = 110V 5 = 240V
Liquid End Options : See Adjacent Table
Valve Accessory : S = 4 function valve T = 3 FV N = Without Valve
Tubing Type : 2 = Imperial 3 = Metric 4 = Reinforced PVC (6 x 12mm)
LMI SERIES B Dosing Pumps
310
LMI2 LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
14
BX1 6.0 ml to 6.0 L/hr Size Code 0.9 10.3 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
398S2 PVC/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
392S2 PVDF/PVDF ceramic PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
390S2 Acrylic/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
85HV PP/PP 316 S PTFE PTFE OPT 0.5" SP-85HV 119.00£
297 316 S/316 S 316 S 316 S PTFE N/A 1/4"NPT N/A POA
BX2 9.5 ml to 9.5 L/hr Size Code 0.9 6.9 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
398S2 PVC/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
392S2 PVDF/PVDF ceramic PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
390S2 Acrylic/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM392-DMR 131.00£
85HV PP/PP 316 S PTFE PTFE OPT 0.5" SP-85HV 119.00£
297 316 S/316 S 316 S 316 S PTFE N/A 1/4"NPT N/A POA
BX3 17.0 ml to 17.0 L/hr Size Code 1.8 3.4 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
368S2 PVC/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
362S2 PVDF/PVDF ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
360S2 Acrylic/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
75HV PP/PP 316 S PTFE PTFE OPT 0.5" SP-75HV 119.00£
277 316 S/316 S 316 S 316 S PTFE N/A 1/4"NPT N/A POA
BX4 26.0 ml to 26.0 L/hr Size Code 3.0 2.0 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
318N2 PVC/PVC ceramic PVDF AFLAS N/A 0.5" RPM312-DMR 163.00£
312N2 PVDF/PVDF ceramic PVDF AFLAS N/A 0.5" RPM312-DMR 163.00£
310N2 Acrylic/PVC ceramic PVDF AFLAS N/A 0.5" RPM312-DMR 163.00£
25HV PP/PP 316 S PTFE PTFE OPT 0.5" SP-25HV 139.00£
27 316 S/316 S 316 S 316 S PTFE N/A 1/2"NPT N/A POA
Materials Valve or Seal
Rings
Rings
Valve or Seal
Rings
Materials
Materials Valve or Seal
1,335.00£
1,545.00£
Prices
B14 B74 B94
1,069.00£
1,278.00£
1,042.00£
1,545.00£ 1,369.00£
Prices
1,159.00£
B12 B72 B92
B71
1,250.00£
B91
1,278.00£
1,312.00£
1,073.00£
1,102.00£
1,136.00£
1,279.00£
B11
Prices
984.00£
1,012.00£
1,046.00£
Materials Valve or Seal
Rings
Prices
1,312.00£
1,012.00£
1,046.00£
1,069.00£
1,279.00£
1,102.00£
984.00£
1,335.00£
1,250.00£
984.00£ 1,073.00£ 1,250.00£
B13 B73 B93
1,871.00£ 1,960.00£
1,278.00£
1,312.00£
1,335.00£
1,279.00£ 1,369.00£ 1,545.00£
1,012.00£
1,046.00£
1,069.00£
1,102.00£
1,136.00£
1,159.00£
2,137.00£
1,164.00£ 1,254.00£ 1,430.00£
1,278.00£ 1,368.00£ 1,544.00£
1,102.00£ 1,191.00£ 1,368.00£
1,130.00£ 1,219.00£ 1,396.00£
1,136.00£
1,159.00£
1,369.00£
LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
15
C1 Range Features :
Manual Control with variable speed and stroke size
Output 4.8ml to 76L/hr
Pressure upto 20.7 bar
Stroke Indicator Light
IP65 Housing
240 Volt & 110 Volt versions
Imperial & metric fitting available
Supplied with Injection Valve, Foot Valve
& 6m of MDPE Tubing (Except 316 SS & HV versions)
C7 Range Features extra to C1 :
Manual Control or External Pulse Control
6- Level pressure control, reduces noise, shock & vibration
Low level indication with pump shut off.
Can be used with LMI Micropace devices for 4-20mA control,
pulse multiply & divide
C9 Range Features extra to C7 :
Microprocessor controlled
Output 0.08ml to 76L/hr
LCD screen with 4-key Tactile Keypad
1 sph to 100 spm
3 external control modes; pulse divide, pulse multiply or 4-20mAProgrammable 0-20mA from 0 - 100 spmFlow monitoring enabled with alarm output. (accessory required)
Model Numbering Example
C 1 3 5 - S 2Tubing Type
Valve Accessory
Liquid End Assembly
Voltage Code
Output Code
Control Code
Pump Series
Control Codes : 1 = Manual Adjustment 7 = External Pulse 9 = Programmable
Output Codes : See Adjacent Table
Voltage Codes : 1 = 110V 5 = 240V
Liquid End Options : See Adjacent Table
Valve Accessory : S = 4 function valve T = 3 FV N = Without Valve
Tubing Type : 2 = Imperial 3 = Metric 4 = Reinforced PVC (6 x 12mm)
LMI SERIES C Dosing Pumps
310
LMI2 LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
16
CX0 4.8ml to 4.9 L/hr (C90 0.08 ml to 4.9 L/hr) Size Code 0.9 20.7 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
297 316 S/316 S 316 S 316 S PTFE N/A 1/4NPT N/A POA
CX1 9.5 ml to 9.5 L/hr (C91 0.16 ml to 9.5 L/hr) Size Code 1.8 10.3 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
368S2 PVC/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
362S2 PVDF/PVDF ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
360S2 Acrylic/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
75HV PP/PP 316 S PTFE PTFE OPT 0.5" SP-75HV 119.00£
277 316 S/316 S 316 S 316 S PTFE N/A 1/4NPT N/A POA
CX2 15.0 ml to 15.2 L/hr (C92 0.25 ml to 15.2 L/hr) Size Code 1.8 6.9 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
368S2 PVC/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
362S2 PVDF/PVDF ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
360S2 Acrylic/PVC ceramic PVDF AFLAS 4 FV 0.375" RPM362-DMR 131.00£
75HV PP/PP 316 S PTFE PTFE OPT 0.5" SP-75HV 119.00£
277 316 S/316 S 316 S 316 S PTFE N/A 1/4NPT N/A POA
CX3 30.4 ml to 30.4 L/hr (C93 0.57 ml to 30.4 L/hr) Size Code 3.0 4.2 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
318S2 PVC/PVC ceramic PVDF AFLAS 4 FV 0.5" RPM312-DMR 163.00£
312S2 PVDF/PVDF ceramic PVDF AFLAS 4 FV 0.5" RPM312-DMR 163.00£
310S2 Acrylic/PVC ceramic PVDF AFLAS 4 FV 0.5" RPM312-DMR 163.00£
25HV PP/PP 316 S PTFE PTFE OPT 0.5" SP-25HV 139.00£
27 316 S/316 S 316 S 316 S PTFE N/A 1/2NPT N/A POA
CX4 76 ml to 76 L/hr (C94 1.27 ml to 76.0 L/hr) Size Code 6.0 1.75 Bar
Liquid Accs. Tubing Spares Kit Price
End Head/Fitting Balls Valve Sizes No.
36 PVC/PVC ceramic PVDF PTFE N/A 0.5" SP-U6 221.00£
32 PVDF/PVDF ceramic PVDF PTFE N/A 0.5" SP-U6 221.00£
30 Acrylic/PVC ceramic PVDF PTFE N/A 0.5" SP-U6 221.00£
35T PP/PP 316 S PTFE PTFE OPT 0.5" SP-U6 221.00£
37 316 S/316 S 316 S 316 S PTFE N/A 1/2NPT N/A POA
C10X C70X C90X Rings
Prices Materials Valve or Seal
Prices Materials Valve or Seal
C11X C71X C91X Rings
1,581.00£ 1,674.00£ 1,842.00£
1,350.00£ 1,443.00£ 1,612.00£
1,373.00£ 1,466.00£ 1,634.00£
1,288.00£ 1,381.00£ 1,550.00£
1,316.00£ 1,409.00£ 1,578.00£
Rings
1,288.00£ 1,381.00£ 1,550.00£
1,581.00£ 1,674.00£ 1,842.00£
Prices Materials Valve or Seal
1,316.00£ 1,409.00£ 1,578.00£
1,350.00£ 1,443.00£ 1,612.00£
C12X C72X C92X
Prices Materials Valve or Seal
C13X C73X C93X Rings
1,373.00£ 1,466.00£ 1,634.00£
1,581.00£ 1,674.00£ 1,842.00£
1,412.00£ 1,505.00£ 1,674.00£
1,475.00£ 1,568.00£ 1,736.00£
1,350.00£ 1,443.00£ 1,612.00£
1,378.00£ 1,471.00£ 1,640.00£
C14X C74X C94X Rings
1,680.00£ 1,773.00£ 1,942.00£
2,062.00£ 2,155.00£ 2,323.00£
Prices Materials Valve or Seal
1,628.00£ 1,721.00£ 1,890.00£
2,268.00£ 2,361.00£ 2,529.00£
1,911.00£ 2,003.00£ 2,172.00£
1,684.00£ 1,777.00£ 1,945.00£
LMI ELECTROMAGNETIC DOSING PUMPSLMI
LMI CATALOGUE 2019
17
Liquid end head assemblies include :-Head BlockSuction & Discharge valve assemblies1/2"BSP Connections, each including a cartridge check valveTube Connection kitsFour Head Block Fixing Screws
NB A 4 Function valve is supplied in place of a discharge valve when ordered for pumps
with a Liquid End Valve code "S"
Part Numbers & Pricing300 BSP
Normal Imperial
Part Numbers & Pricing
£509.00
£509.00
7736477364
7736777367
77364
Diaphragm
30916309173142031419
Price
46.35£ 52.44£ 52.44£ 84.15£
136.59£ 7736725719
Foot Valve
77367
Size Code
0.50.91.83.06.0
Price
56.00£ 56.00£ 56.00£ 56.00£ 56.00£
Price
73.00£ 73.00£
Injection Valve
73.00£ 73.00£
7736477364
73.00£ 77367
Part Number
LMI Head Assemblies
Price Liquid End Code
MaterialPrice
N2
HA312(XX)HA318(XX)
368
312318
HA350(XX)HA352(XX)HA358(XX)HA360(XX)HA362(XX)
350352358360362
Liquid End Code
Part Number Material
(N3) (S3)Normal Imperial 4 FV Imperial Normal Metric 4 FV Metric
(N2) (S2)
Prices
HA310(XX)310
£217.00 £309.00
£416.00 £507.00£309.00 £402.00
£158.00 £249.00
£316.00
HA368(XX)
AcrylicPVDFPVC
£407.00 £498.00
£207.00 £299.00£316.00 £408.00
AcrylicPVDFPVC
AcrylicPVDF
£158.00 £249.00
£148.00 £240.00
PVC
£299.00 £391.00
£408.00£208.00 £300.00 £208.00 £300.00
£148.00 £240.00
£299.00 £391.00 £299.00 £391.00£218.00 £311.00 £218.00 £311.00
£391.00392 HA392(XX) PVDF £224.00 £315.00 £224.00 £315.00390 HA390(XX) Acrylic £299.00 £391.00 £299.00
£232.00398 HA398(XX) PVC £140.00 £232.00 £140.00
100 SERIES
N2
Liquid End Code
Part Number Normal ImperialMaterial
25HV 27083 Polypropylene £331.00
20HV 26163 Acrylic £360.00 £287.00
£315.00
32 33538 PVDF £793.00
25T 25155 Polypropylene £331.00 £299.00
£509.00
25660 Acrylic
156 28420 Acrylic
155HV 28416 Polypropylene
86
85HV 27082 Polypropylene £315.00
257 32516 316L
297 32517 316L
277 32518 316L
76 25659 Acrylic £287.00
75HV 27081 Polypropylene £315.00
18 LMI ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
Liquid end head assemblies include :-Head BlockSuction & Discharge valve assemblies1/2"BSP Connections, each including a cartridge check valveTube Connection kitsFour Head Block Fixing Screws
NB A 4 Function valve is supplied in place of a discharge valve when ordered for pumps
with a Liquid End Valve code "S"
Part Numbers & Pricing600, 800 & 900 BSP
Part Numbers & Pricing
Liquid End Code Material
812818822828832
HA812(XX)HA818(XX)HA822(XX)HA828(XX)HA832(XX)
Part Number
PVCPVDF
48188
4872143.90£ 70.74£
487211.9 48189 4872882.93£
624
634
644
Acrylic
48728
HAA40(XX)A40
48728
Diaphragm Injection Valve
PP
PP
PP
HA624V
HA634V
HA644V
Price
32.93£ 0.4 48187 487280.2 48186
0.848721
Size Code
POA POA
POA POA POA POA
POA POA POA POA
POA POA
Standard No Valve
(N)
POAPOAPOAPOAPOAPOAPOA
920927
937940
HA947(XX)947
A20
A30
POA907917
Acrylic316SS
316SS
Standard 4 FV(S)
POAPOAPOAPOAPOAPOAPOA
Autoprime No Valve
(A)
POAPOAPOAPOAPOAPOAPOA
Autoprime 4FV(H)
POAPOAPOAPOAPOAPOAPOAPOAPOA
POAPOA
POAPOA
POAPOAPVC
PVC
LMI Head Assemblies
POA POA POA POA
POA POA POA POA
Acrylic
Acrylic
POA POA POA POAPOA POA POA POA
Acrylic316SS
HA930(XX)HA937
HA940(XX)
POA
POA POA
POA POA POA POAPOA POA POA POA
POA POA
316SS
HAA20(XX)
HAA30(XX)
930
HA920(XX)HA927
POA POA POAPOA POA POA POA
HA907NPHA917
POA POA POAPOA POA POA POA
Acrylic316SS
HAA48(XX)A48
HAA28(XX)HAA38(XX)
A28A38
PVCHA848(XX)
842848
PVDFPVC
HA842(XX)838
POA POA POA POAPOA POA POA POA
PVDF
PVCPVDFPVCHA838(XX)
Prices
Price
71.00£ 71.00£ 71.00£ 71.00£
Price
56.00£ 56.00£ 56.00£ 56.00£
48721
Foot Valve
19LMI ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
4 Function Valves Features : Anti-Siphon - enables downstream dosing or into low pressure
Back Pressure Valve - Maintains 1.4 bar back pressure avoiding over
dosing
Priming - Helps to bleed air in the liquid end on start - up
Line Depressurisation - Takes pressure from
discharge tube without having to disconnect
3 Function Valve Features : Back Pressure Valve - Maintains 1.4 bar back pressure avoiding over
dosing
Priming - Helps to bleed air in the liquid end on start - up
Line Depressurisation - Takes pressure from discharge tube without
having to disconnect
4 Function Valve Features : Adjustable continuous bleed of degassing or entrapped vapours
Continuous Bleed Anti-Siphon - enables downstream dosing or into low pressure
Back Pressure Valve - Maintains 1.4 bar back pressure avoiding over
dosing
Priming - Helps to bleed air in the liquid end on start - up
Line Depressurisation - Takes pressure from discharge tube without
having to disconnect
Price
91.00£
83.00£
96.00£
105.00£
105.00£
129.00£
95.00£
105.00£
151.00£
67.00£
LMI Dosing Pump Accessories
Description Part Number
4FV For 4x6, 6x8, 6x12
4FV For 1/4" Tube
4FV For 1/2" Tube
Convert To Negative Suction
77388
49148
77395
27043
27048
27051
3133628046
34626
NEG
4FV For 1/4" Tube
4FV
3 FV
4FV Continuous Bleed
4FV For 1/2" Tube
4FV For 3/8" Tube
N/A
To Fit Liquid Ends
LMI 300 BSP SERIES
LMI 300 BSP SERIES
LMI 300 BSP SERIES
11S, 12S, 71S, 112S, & 118S
61S, 62S, 91S, 922S, 162S, 168S, 192S & 198S
94S
All Metric Liquid Ends except 20, 30 & HV158S & 190
20S, 25T, 26S, 30S, 35T, 36S & ALL HV
ALL HV SERIES
PVDF
PVDF
PVDF
PVDF
PVDF
Material
PVDF
PVC
PVDF
PVDF
20 LMI ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
Common Nut 6 x 8 Tubing (70182) (77379) 9 x 12 Tubing
4 x 6 Tubing (77380) 6 x 12 Tubing(77378) (77381)
1/2" BSP Common Valve 1/2" Tubing 1/4" Tubing Body (77385) (77384) (77382)
7/8-14 UNF 3/8" Tubing Thread Liquipro Cartridge (54714)
(77350)(77352 for 1/4" & 6mm)
Part Number
Part Number
DescriptionPart
NumberDescription Price
77378 70191 Ferrule
77379 70187 Cones 70188 Sleeve £4.0077380
77381 70185 Cones 70186 Sleeve £5.0077382 70196 Ferrule
54714 70192 Cones 70193 Sleeve £6.0077384 70194 Cones 70195 Sleeve £6.0077385
77352
77350
70182
1/2"
ALL
1/4"
3/8" £15.49
£15.49
Valve
£15.49
£15.49
£19.91
£15.49
£15.49
£9.00
Description Price
Coupling Kit
Valve Body
Valve
Price
ALL OTHERS
Coupling Kit
Coupling Kit
Coupling Kit
Coupling Kit
Coupling Kit
Coupling Kit
4 x 6 mm
6 x 8 mm
9 x 12 mm
6 x 12 mm
1/4" & 6mm £22.00
£14.00
Size (ID x OD)
LMI ConnectionsFor 300, 800 & 900 BSP series Liquid Ends
1/2" NUT £6.00
£3.00
£6.00
£6.00
£5.00
£4.00
£6.00
21LMI ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
Roytronic 4 FV Features :Anti-Siphon - enables downstream dosing or into low pressure
Back Pressure Valve - Maintains 1.4 bar back pressure avoiding over
dosing
Priming - Helps to bleed air in the liquid end on start - up
Line Depressurisation - Takes pressure from
discharge tube without having to disconnect
Autoprime Valve Features :Automatic bleed of degassing or entrapped vapours
Priming - Helps to bleed air in the liquid end on start - up
Used inconjunction with 4FV to provide back pressure,
Line depressurisation & Anti-syphon function
Available in PVC for Hydrogen Peroxide
& Acrylic for Chlorine based disinfectants
Flow Monitor Features :Two selectable ranges, upto 6L/hr & upto 30L/hr
FM 301-302 has flow rate upto 95L/hr
Transmitter Output : No Flow = N.O. switch Condition
Maximum Pressure 10 Bar
Can be used directly with LMI 9 Series pumps.
Pump Mounting Features :Allow the secure fixing of any LMI solenoid metering pump
Wall mounted shelf
Stainless Steel Fixing brackets for securing to a flat surface
Pump shelf welded to the DT range of tanks
22 LMI ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICING
Price
102.00£
102.00£
Price
217.00£
231.00£
Price
338.00£
361.00£
338.00£
361.00£
351.00£
361.00£
361.00£
Price
52.00£
30.00£
55.00£
Flow Monitor
Flow Monitor
Pump Mounting
34643
10461
PPS-W
Flow Monitor
Flow Monitor
Flow Monitor
Pump Mounting
Pump Mounting
Flow Monitor
FM350
FM359
FM-450
FM-459
FM350
FM359
Male Valve Housing 1/2" NPT
Use with 9 series, with 1/2" OD Tubing
4FV Roytronic 48799 Roytronic High Pressure
4FV Roytronic Roytronic Low Pressure
Description Part Number
316S
300 Series Liquid EndsFlow Monitor
PVDF
Auto Prime Degassing Valve
Auto Prime Degassing Valve
Acrylic
PVC
PVDF
Material
Description Part Number To Fit Material
48754
38538
38794
300 Series Liquid Ends
300 Series Liquid Ends
FM-879
To Fit
MDPE
Description Part Number To Fit Replaces
Description Part Number To Fit Material
LMI range to Wall mounted shelf
LMI range to flat surface
LMI range to tank welded shelf
FM301
FM301-9
FM302
FM302-9
FM-PRO
FM-PRO-9
FM-ROY-9
with 1/2" NPT MVH for 9 series pumps
300 Series Liquid Ends ; 9 series pumps
Roytronic Excel AD9 series pumps
Male Valve Housing 1/2" NPT
23LMI ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
SINGLE WALLEDFeatures :
Available in MDPE, HDPE & PTFE
Imperial & Metric Sizes
Working Pressure Ranges between 100 & 623 psi
Burst Pressure Ranges between 505 & 2492 psi
Temperature Ranges between -20 & 2650C
1/4", 3/8", 1/2", 6 mm, 8 mm, & 12 mm
DOUBLED WALLEDFeatures :
As for Singled Walled with the inclusion of an outer
Yellow or Black LDPE
Inline adaptors available to join both inner & outer
Double Walled Injection Connectors available
to seal potential leaks so they drain back to the
dosing pumps
CLEAR BRAIDED HOSEFeatures :
PVC Construction
Various Sizes
6 mm, 3/4", 1/2", 1", 11/4", 11/2", 2"
NB ALL Tubing ONLY available :-In multiples of 30m, 50m & 100m for MDPE, increments of 10m up to 100m for PTFEIncrements of 10m up to 50m for Clear Braided Hose
TUBING
24 LMI ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICING
SINGLE WALLED
DOUBLE WALLED
CLEAR BRAIDED HOSE
CBPH-1 1/2 PVC 1 1/2" Bore Hose £5.20CBPH-2 PVC 2" Bore Hose £7.54
CBPH-3/4 PVC 3/4" Bore Hose £1.68CBPH-1 PVC 1" Bore Hose £2.34
CBPH-1 1/4 PVC 1 1/4" Bore Hose £4.22
MATERIAL SIZEPRICE per
METRECBPH-6 PVC 6 mm ID x 12 mm OD £0.91
CBPH-1/2 PVC 1/2" Bore Hose £0.92
PART NUMBERPRICE per
METRE
MDPEMDPE
£1.13High Density Poly Ethylene (HDPE) 1/2" OD x 3/8" ID
6 mm-MDPE £0.386 mm OD x 4 mm ID1/2-MDPE £0.74
1/4-MDPE £0.403/8-MDPE £0.59
SIZE
1/4" OD (INNER) x 1/2" OD (OUTER)3/8" OD (INNER) x 3/4" OD (OUTER)
1/4" OD x 0.157" ID
£5.00
£1.13
6 mm-HDPE £0.618 mm-HDPE £0.80
8 mm-MDPE Medium Density Poly Ethylene (MDPE) 8 mm OD x 6 mm ID £0.48£0.74
High Density Poly Ethylene (HDPE) 8 mm OD x 6 mm IDHigh Density Poly Ethylene (HDPE) 12 mm OD x 9 mm ID
High Density Poly Ethylene (HDPE) 6 mm OD x 4 mm ID
3/8-HDPE High Density Poly Ethylene (HDPE) 3/8" OD x 1/4" ID1/2-HDPE
£13.08TEFLON (PTFE) 1/2" OD x 3/8" ID
12 mm DW-PTFE £8.76
SIZE
1/4" OD x 0.157" ID3/8" OD x 1/4" ID1/2" OD x 3/8" ID
6 mm DW-PTFE £4.378 mm DW-PTFE £5.97
12 mm-PTFE £7.79
6 mm-PTFE £3.76TEFLON (PTFE)
£0.951/4-HDPE High Density Poly Ethylene (HDPE) 1/4" OD x 0.157" ID £0.63
12 mm-MDPE
£14.36TEFLON (PTFE) 3/8" OD x 1/4" ID1/4-PTFE £6.38
1/2DW-MDPE £1.706 mm DW-MDPE £0.99
1/4DW-MDPE £1.013/8DW-MDPE £1.55
MDPEMDPE 6 mm OD (INNER) x 1/2" OD (OUTER)
PART NUMBERPRICE per
METRE
8 mm-PTFE TEFLON (PTFE)TEFLON (PTFE)
8 mm OD x 6 mm ID12 mm OD x 9 mm ID
1/2-PTFE
£1.243/8DW-HDPE £1.91
8 mm DW-MDPE £1.4512 mm DW-MDPE £1.70
8 mm DW-HDPE £1.76
1/4" OD (INNER) x 1/2" OD (OUTER)3/8" OD (INNER) x 3/4" OD (OUTER)1/2" OD (INNER) x 3/4" OD (OUTER)
6 mm OD (INNER) x 1/2" OD (OUTER)8 mm OD (INNER) x 3/4" OD (OUTER)
8 mm OD (INNER) x 3/4" OD (OUTER)12 mm OD (INNER) x 3/4" OD (OUTER)
MDPEMDPE
HDPEHDPEHDPEHDPEHDPE
1/4DW-HDPE
£2.10
1/2DW-HDPE £2.106 mm DW-HDPE £1.22
1/2 DW-PTFE £14.05
1/4 DW-PTFE £6.993/8 DW-PTFE £15.29
1/4" OD (INNER) x 1/2" OD (OUTER)3/8" OD (INNER) x 3/4" OD (OUTER)1/2" OD (INNER) x 3/4" OD (OUTER)
12 mm OD (INNER) x 3/4" OD (OUTER)
PTFEPTFE
PTFE
HDPE12 mm DW-HDPE
3/8-PTFE
Medium Density Poly Ethylene (MDPE)
Medium Density Poly Ethylene (MDPE)
12 mm-HDPE
1/2" OD (INNER) x 3/4" OD (OUTER)
MATERIAL
Medium Density Poly Ethylene (MDPE)
TEFLON (PTFE)
Medium Density Poly Ethylene (MDPE)Medium Density Poly Ethylene (MDPE)
12 mm OD (INNER) x 3/4" OD (OUTER)
MATERIAL
PTFEPTFEPTFE
6 mm OD (INNER) x 1/2" OD (OUTER)8 mm OD (INNER) x 3/4" OD (OUTER)
6 mm OD x 4 mm ID
12 mm OD x 9 mm ID
PART NUMBER
25LMI ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
Polypropylene illustrated PVDF illustrated
Suitable for Pressure up to 220 psi / 15.2 Bar
Male Stud Couplings (Imperial) Male Stud Couplings (Metric)
Straight Connectors (Imperial) Straight Connectors (Metric)
PriceMaterialMaterialPart
NumberMSC 1/4-1/4
Size
MSC 6-1/4PP
Price
£2.79
£3.18
£6.03
£7.73
£5.28
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
6mmOD - 1/4"BSP
6mmOD - 3/8"BSP
6mmOD - 1/2"BSP
8mmOD - 1/4"BSP
£2.54
Size Part
Number1/4"OD - 1/4"NPT POLYPROPYLENE £2.12
£2.18MSC 1/4-3/8
MSC 3/8-1/4
MSC 3/8-3/8
MSC 6-3/8PP
MSC 6-1/2PP
MSC 8-1/4PP
1/4"OD - 3/8"NPT
3/8"OD - 1/4"NPT
3/8"OD - 3/8"NPT
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
MSC 3/4-1/2
MSC 3/4-3/4
MSC 3/8-1/2
MSC 1/2-3/8
MSC 1/2-1/2
3/4"OD - 1/2"NPT
3/8"OD - 1/2"NPT
1/2"OD - 3/8"NPT
1/2"OD - 1/2"NPT
3/4"OD - 3/4"NPT
£8.21
£8.98
12mmOD - 1/2"BSP £13.47
PVDF
POLYPROPYLENE
POLYPROPYLENE
POLYPROPYLENE
£3.29
£3.39
£3.60
£6.53
MSC 6-1/2
MSC 8-1/4
MSC 8-3/8PP
MSC 8-1/2PP
MSC 12-1/2PP
£6.81
8mmOD - 3/8"BSP
8mmOD - 1/2"BSP
£7.80
£11.39
£11.80
£9.21
£13.86
£15.58
MSC 8-3/8
PVDF
PVDF
PVDF
PVDF
£22.28
MSC 8-1/2
MSC 12-1/2
6mmOD - 1/4"BSP
6mmOD - 3/8"BSP
6mmOD - 1/2"BSP
8mmOD - 1/4"BSP
8mmOD - 3/8"BSP
8mmOD - 1/2"BSP
12mmOD - 1/2"BSP
MSC 6-1/4
MSC 6-3/8
PVDF
PVDF
Part Number
Size MaterialPrice
£3.15 SC 6PP 6mm OD - 6mm OD POLYPROPYLENE
£10.14
SC3/8
SC1/2
SC3/4
3/8"OD - 3/8"OD
1/2"OD - 1/2"OD
3/4"OD - 3/4"OD
Part Number
Size Material
SC1/4 1/4"OD - 1/4"OD POLYPROPYLENE
POLYPROPYLENE
Price
SC 12 12mm OD - 12mm OD PVDF £23.76
SC 8 8mm OD - 8mm OD PVDF £14.18
SC 8PP
£2.59
SC 6 6mm OD - 6mm OD PVDF £8.25
8mm OD - 8mm OD POLYPROPYLENE £4.72
SC 12PP 12mm OD - 12mm OD POLYPROPYLENE £26.77POLYPROPYLENE
POLYPROPYLENE
£4.25
£5.43
TUBE CONNECTORS
26 LMI ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
Elbow Connectors (Imperial) Elbow Connectors (Metric)
Bulkhead Connectors (Imperial) Bulkhead Connectors (Metric)
Tee Connectors (Imperial) Tee Connectors (Metric)
In-Line Reducer (Imperial) In-Line Reducer (Metric)
Price
EC1/4 1/4"OD - 1/4"OD POLYPROPYLENE £4.01 POLYPROPYLENE £2.91
Part Number
Size Material PricePart
Number Size
EC 6PP
EC3/8 3/8"OD - 3/8"OD POLYPROPYLENE £5.33
EC1/2 1/2"OD - 1/2"OD POLYPROPYLENE £6.53
Material
PVDF £15.24
EC 8 8mm OD - 8mm OD PVDF £16.61
POLYPROPYLENE £5.12
EC 12PP 12mm OD - 12mm OD POLYPROPYLENE £12.81
EC 8PP 8mm OD - 8mm OD
EC 6 6mm OD - 6mm OD
6mm OD - 6mm OD
EC 12 12mm OD - 12mm OD PVDF £25.51
Part Number
Size Material PricePart
Number Size (OD) Material Price
BC1/4 1/4"OD - 1/4"OD POLYPROPYLENE £4.25 BC 6PP 6mm OD - 6mm OD POLYPROPYLENE £3.24
BC1/2 1/2"OD - 1/2"OD POLYPROPYLENE £7.01 BC 12PP 12mm OD - 12mm OD POLYPROPYLENE £12.90
BC3/8 3/8"OD - 3/8"OD POLYPROPYLENE £5.33 BC 8PP 8mm OD - 8mm OD
BC 6 6mm OD - 6mm OD PVDF £11.59
BC 8 8mm OD - 8mm OD PVDF £17.86
POLYPROPYLENE £5.55
Material Price
TC1/4 1/4" - 1/4" - 1/4"OD POLYPROPYLENE £5.28 TC 6PP 6mm - 6mm - 6mm POLYPROPYLENE £3.52
Part Number
Size Material PricePart
Number Size (OD)
TC1/2 1/2" - 1/24" - 1/2"OD POLYPROPYLENE £8.39 TC 12PP 12mm - 12mm - 12mm POLYPROPYLENE £26.77
TC3/8 3/8" - 3/8" - 3/8"OD POLYPROPYLENE £6.99 TC 8PP 8mm - 8mm - 8mm
TC 6 6mm - 6mm - 6mm PVDF £15.21
TC 8 8mm - 8mm - 8mm PVDF £19.72
POLYPROPYLENE £8.20
TC 12 12mm - 12mm - 12mm PVDF £32.28
Part Number
Size Material PricePart
Number Size (OD) Material Price
IR1/4 1/4" - 1/4" - 1/4"OD POLYPROPYLENE £3.90 IR 6PP 6mm - 8mm POLYPROPYLENE £5.89
£7.93
POLYPROPYLENE £14.46
IR 6-1/4PP 6mm - 1/4" POLYPROPYLENE £2.65
IR3/8 3/8" - 3/8" - 3/8"OD POLYPROPYLENE £4.86 IR 8PP 8mm - 12mm
IR 8-6 8mm - 6mm PVDF £17.73
IR 3/8-8 3/8" - 8mm PVDF £21.41
IR 8-1/2PP 8mm - 1/2" POLYPROPYLENE £14.89
IR 12-1/2PP 12mm - 1/2" POLYPROPYLENE £14.89
IR 6-3/8PP 6mm - 3/8" POLYPROPYLENE £7.95
IR 8-3/8PP 8mm - 3/8" POLYPROPYLENE
27LMI ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
DOUBLE WALLED TUBING CONNECTORSFeatures :
Provides Safe containment of chemical in case
of inner tube rupture.
Designed for use with LMI tubing listed above
Female 1/2" BSP thread
Connects the Inner & Outer tubes together
Designed to fit the LMI Standard Injection Valve
Supplied with corresponding tube connection kitNB. Does NOT include injection valve illustrated above
SPECIFICATION & PRICES
TUBING SPECIFICATIONS
PART NUMBERDWTA-B1/4
DWTA-B3/8
DWTA-B1/2
DWTA-B6
DWTA-B8
12 mm PTFE 505
BURST PRESSURE (psi)1340
1131
754
1131
754
1/4" HDPE 2492
TUBE SIZE
1/4"
3/8"
1/2"
6 mm
8 mm
100 s -200C to +2650C
2103 526 s -200C to +700C8 mm HDPE 1402 351 s -200C to +700C
1/4" PTFE 1215 243 s -200C to +2650C
1/2" PTFE 675 135 s -200C to +2650C6 mm
8 mm PTFE 676
s -200C to +700C
RECOMMENDED WORKING PRESSURE (psi)
335
283
189
283
189
623
PTFE 1015 203 s -200C to +2650C
s -200C to +650C
s -200C to +650C
MATERIAL
MDPE
MDPE
MDPE
MDPE
MDPE
s -200C to +650C
s -200C to +650C
s -200C to +650C
135 s -200C to +2650C
To Fit 8 mm OD inner & 3/4" OD outer tubing
3/8" PTFE 1016 203 s -200C to +2650C
3/8" HDPE 2103 526 s -200C to +700C1/2" HDPE 1402 350 s -200C to +700C
6 mm HDPE
RECOMMENDED WORKING TEMPERATURE
£22.40
£23.04
£5.43
To Fit 12 mm OD inner & 3/4" OD outer tubing
To Connect 1/2" OD Outer Tubing Together
To Connect 3/4" OD Outer Tubing Together
DESCRIPTIONTo Fit 1/4" OD inner & 1/2" OD outer tubing
To Fit 3/8" OD inner & 3/4" OD outer tubing
To Fit 1/2" OD inner & 3/4" OD outer tubing
To Fit 6 mm OD inner & 1/2" OD outer tubing
PRICE£17.58
£23.67
£22.40
£17.58
To Extend both inner & Outer tube length (1/2" & 3/8"; 8mm & 12mm OD)
ILDWTA 1/4-6
ILDWTA 1/2-3/8
DWTA-B12
SC 1/2
SC 3/4 £10.14
£92.00
£119.00
To Extend both inner & Outer tube length (1/4" & 6mm OD)
28 LMI ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
Features :Wall mounting.
IP 65 Protection for contents.
GRP or Stainless Steel Construction.
Glazed Lockable Door.
Pump Shelf for the fitting of upto 3 LMI B or C Series Pumps
Or 4 P, PD, AA or AD Series Pumps.
Specifications & Pricing
Pump Enclosure 600 mm x 600 mm x 400 mm
Three Piece Stainless Steel Enclosure for Wall Mounting
Steel Stand for free Standing Enclosure Height 1 m
Ventilation Kit for Enclosures when used with Motor Driven Pumps
ENCLOSURES
£69.00Pump Fitting including Mounting Kit & Tube Connector
PRICE
£641.00
£686.00
£213.00
£231.00
PART NUMBER
GRPENC
SSENC
ENCSTA
VENTKIT
DESCRIPTION
ENCSTA (SS) Stainless Steel Stand for free Standing Enclosure Height 1 m £297.00
29LMI ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
Foot ValveFeatures :
LMI 300 Series Connection (Except 316L)PVDF ConstructionNon - Return Cartridge ValveMesh Strainer for larger product particlesKeeps pump primed in negative suctionapplications
Injection ValveFeatures :
LMI 300 Series Connection (Except 316L)PVDF ConstructionNon - Return Spring ValveGives back pressure to aid accurate dosing
Injection BlockFeatures :
PVC ConstructionAids the mixing of Chlorine & Brominebased chemicals prior to injection intothe process water system via 1" outletAccepts two LMI injection valvesvia 2 off 1/2" inlets
Corporation StopFeatures :
Improves Chemical DispersionMinimises Process Pipe CorrosionAccepts LMI injection valve with1/2" BSP Thread.Injection Valve & Quill can be removed without shutdown of the process line
Rodding InjectorFeatures :
Designed to remove build up of crystallinedeposits on the LMI injection valveAvailable in two sizes with BSP connectionsPVC ConstructionStainless Steel rodding shaft (Replaceable)
Injection QuillsFeatures :
Available in Standard, Retractable &Heat Sink Versions.Accepts LMI injection valveShut off and non-return valves.Hastelloy Ball available when ceramicball unsuitable, simply add £33.00& an I to the price of H option code
Chemical Injection Accessories
30 LMI ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
LE PriceP1T Foot Valve £73.00D1T Foot Valve £73.00V1H Foot Valve £91.00S1N Foot Valve £210.00P4T Foot Valve £73.00D4T Foot Valve £73.00V4H Foot Valve £91.00S4N Foot Valve £210.00P6P Foot Valve £105.00D6P Foot Valve £136.00V6H Foot Valve £71.00S6N Foot Valve £210.00P40Q Foot Valve £313.00P50Q Foot Valve £313.00D40N Foot Valve N/AD50N Foot Valve N/AV40H Foot Valve £1,052.00V50H Foot Valve £1,052.00S40N Foot Valve N/AS50N Foot Valve N/A541H Foot Valve £975.00541Q Foot Valve £1,052.00542N Foot Valve N/A547N Foot Valve N/A561H Foot Valve £1,175.00561Q Foot Valve £1,052.00562N Foot Valve N/A567N Foot Valve N/A581H Foot Valve £1,175.00581Q Foot Valve £1,052.00587N Foot Valve N/A
** Include Hastelloy C Spring for chemicals incompatible with 316L stainless steel£261.00
£208.00£239.00
£244.00£173.00
£184.00
Nozzle Assembly
49287
AWIF-BN000
Description Part Number
£3.77
IQ-5B8-316-25 £227.00 IQ-5B8-316-25 H
£205.00 IQ-5B6-PVDF-25 H
IQ-5B8-PP-25 HIQ-5B8-PVDF-25 £223.00 IQ-5B8-PVDF-25 H
IQ-5B6-316-25 HIQ-5B8-PVC-25 H
IQ-5B8-PP-25
Item
£271.00
SSRIQ £481.003/8" Stainless steel quill with 3/4", 18" rectractable quill Overall length of 23" with 1/2" female connection
Price
connection to accept standard LMI injection Valve
Part NumberS-SIQ
Same as S-SIQ with the addition of 1 metre 3/8" stainless steel heat sink, 1/2" female connection SSIQ-HS (PT)
Description6" Injection Quill with 1/2" BSP injection connection terminating in 1/2" female £258.00
Description
Price
Price1781 £191.00
Description Part Number Price
£240.00
Replacement "O" rings
£263.00
£242.00
Rodding Injector, 3/4" with BSP threadRodding Injector, 1/2" with BSP threadReplacement shaft, 316L
RODINJ 3/4RODINJ 1/2
RIS-316
£130.00£135.00
Price
RIK-3/4-1/2RIO-3/4-1/2
Corporation Stop 3/4" Bronze c/w CPVC
Price Part Number **IQ-5B6-PVC-25 £139.00 IQ-5B6-PVC-25 H
IQ-5B6-PVDF-25
£49.00
£0.30
3050987217F3050987410F
N/A
IQ 5B6 316 2577032
IQ 5B6 316 25
1/2" BSP1/2" BSP
1/2" BSP1/2" BSP1/2" BSP1/2" BSP
N/AN/A
3050987310F3050987410F
£487.00£347.00
N/A
N/AN/A
3050987310F3050987410F
N/A
1/2" BSP1/2" BSP1/2" BSP
1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP
Injection ValveInjection Valve
Size
1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP
1/2" BSP1/2" BSP1/2" BSP1/2" BSP1/2" BSP
1/2" BSP1/2" BSP
3050987410FN/A
1/2" BSP1/2" BSP1/2" BSP
773647736477031
Injection Valve
3050823307F3050823307F
1/2" BSP
N/A3050987410F
77109
Injection Valve
1/2" BSP1/2" BSP
£319.00£228.00
1/2" BSP1/2" BSP
£174.00£174.00£319.00
N/A
1/2" BSP
Part Number Size
1/2" BSP1/2" BSP1/2" BSP1/2" BSP
N/A
1/2" BSP
IQ-5B6-PP-25 H
N/A
27535
1/2" BSP1/2" BSP1/2" BSP1/2" BSP
1/2" BSP77368
£56.00
Injection Valve
Injection Valve£613.00
N/AInjection Valve
Injection Valve
Description
N/A
77035
Injection Valve
Injection Valve
Price
£56.00£56.00 Injection Valve
Injection Valve773647736477031
IQ 5B6 316 25
£56.00N/A
£613.00£91.00
£105.00N/A
Part Number
£228.00£184.00
Nozzle Assembly
1/2" BSP
1/2" BSP
N/A
1/2" BSP1/2" BSP1/2" BSP
7703477037
N/A
1/2" BSP1/2" BSP1/2" BSP
3050987157F3050987350F3050987350F
N/A
£401.00£347.00
N/A
Corporation Stop 1" Bronze c/w CPVC
IQ-5B6-316-25
Injection Valve
Injection ValveInjection Valve
Injection ValveInjection Valve
Injection ValveInjection Valve
Injection Block PVC (Hypo/bromine)
N/A
N/A3050987050F3050987050F3050987157F
3050987250F3050987150F
N/A
3050987360F
3050987260F3050987060F
1/2" BSP
3050987060F
N/A
8" Injection Quill PVDF (upto 1250C)8" Injection Quill 316L (upto 2600C)
£173.00
Injection Valve
Injection ValveInjection Valve
Injection ValveInjection Valve
Injection ValveInjection Valve
N/AN/A
8" Injection Quill PP (upto 900C)IQ-5B8-PVC-25 £150.00
N/A
IQ-5B6-PP-25 £149.00
1/2" BSP1/2" BSP
Replacement Knob
Description Part Number
£174.00
Injection Valve
8" Injection Quill PVC (upto 600C)£210.00
Part Number6" Injection Quill PVC (upto 600C) 6" Injection Quill PP (upto 900C)6" Injection Quill PVDF (upto 1250C)6" Injection Quill 316L (upto 2600C)
Injection ValveInjection Valve
7736777368
N/A2753577367
1/2" BSP
Injection ValveInjection Valve
£228.00N/A
N/AN/A
31LMI ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
ERB1 Range Features :
Manual Control with variable speed Stepper Motor (+/-) 1% Steady State Accuracy
Multi language options ; Four colour backlit display Up to 1000:1 Turndown rate
Variable stroke profile ; Calibration Function 23ml to 68L/hr; 12 Bar max press.
Slow suction mode for viscous liquids Stop/start, 100% capacity button
Alarm Log Diaphragm replacement mode
Level switch cut off.
ERB2 Range Features extra to ERB1 :
Remote Connectivity enabling control and feedback
in real time via programmable input and output
such as 4-20mA,
ERC Range Features extra to ERB2 :Available mid -2019 Profibus & Modbus 23ml to 200.6L/hr; 12 Bar max press.
StayPrime degassing Technology Remote access via cloud (IoT)
Model Tubing Kit
Control Code Fitting Connection
Output Code Voltage Code Head Size Code Ball Material Fitting Material
LE Type Head Material Seat Material "O" ring material
Model : ERB
Control Codes : 1 = Manual 2 = Enhanced
Output Codes : 2 = 21L/hr 3 = 56L/hr 4 = 68L/hr (@ 12 Bar) (@ 5 Bar) (@ 3.5 Bar)
Voltage Codes : 5 = 100 - 240V UK Plug
Liquid End Type : A = Standard V = HV S = Slurry
Head Material : 1 = 316L 2 = PVC 4 = PP 7 = PVDF
Head Size Code : 4 = Size 4 Diaphragm 6 = Size 6 Diaphragm
Seat Material : A = TFE/P T = PTFE V = FKM 1 = 316L
Ball Material : C = Ceramic 1 = 316L 4 = 440C T = PTFE
"O" ring Material : A = TFE/P V = FKM
Fitting Material : 1 = 316L 2 = PVC 4 = PP 7 = PVDF
Fitting Connection : P = NPT B = BSP S = Socket F = DN15(F) D = DN15(M) T = Imp M= Metric
Tubing Type : N =None 1 = Kit 1 2 = Kit 2 3 = Kit 3 4 = Kit 4
5 A 4 4 A C
Model Numbering Example
ERB 7 TA1 3 1
PROTEUS SERIES Dosing Pumps
32 SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019 L
MI
ERBX25 21L/ hr 12 Bar
ERBX35 56L/ hr
ERBX45 68L/ hr 3.5 Bar
CARRIAGE CHARGES
AFLAS
AFLAS
PTFE
316L
NPT
NPT
1/2"FNPT 15 x 23 PVC (S)
NPT
RPM54780
RPM54773
RPM54777
RPM54775
Spares Kit No.PricesLiquid Materials
PricesLiquid
End
A44ACA7M2
A74TCA7M2
V44T1N4T3
A1411V1PN
Balls
ceramic
ceramic
316L
316L
MaterialsHead / Fitting
PP/PVDF
Balls
PVDF
PP
Tubing
Sizes
Tubing
Sizes6 x 12 PVC
8mm MDPE6 x 12 PVC
8mm MDPE1/2" OD MDPE 15 x 23 PVC (S)
1/2"NPT
RPM54771
RPM54773
RPM54777
RPM54775
Spares Kit No.
A44ACA7M2
A74TCA7M2
V44T1N4T3
A1411V1PN
PricesLiquid
End Balls
ceramic
ceramic
316L
316L
Materials
2,638.00£
ERB225
2,618.00£
2,758.00£
2,635.00£
2,957.00£
Head / Fitting
PP/PVDFPVDF/ PVDFPP/PP (HV)316L /316L 316L
362.00£
360.00£
344.00£
651.00£
PriceValve / Seal
Rings
AFLAS
AFLAS
PTFE
PVDF
PVDF
PP
ERB125
2,299.00£
2,439.00£
2,316.00£
A46VCN4PN
A76VCN7PN
V46T1N4P4
A1611V1PN
ceramic
ceramic
316L
PVDF
PP
PVDF/ PVDF
PP/PP (HV)
PP/PP PVDF
3,234.00£ 2,915.00£ 316L /316L
2,664.00£
2,933.00£
2,916.00£
2,344.00£
2,613.00£
2,596.00£
316L
5 Bar
362.00£
360.00£
344.00£
651.00£
AFLAS
AFLAS
PTFE
316L
Valve / Seal Rings
RPM54771
RPM54773
RPM54777
RPM54775
Spares Kit No.
PVDF
ERB235
PVDF/ PVDFPP/PP (HV)
Tubing
Sizes6 x 12 PVC
8mm MDPE6 x 12 PVC
8mm MDPE1/2" OD MDPE 15 x 23 PVC (S)
1/2"NPT
Price
176.00£
360.00£
344.00£
651.00£
Price
Valve / Seal Rings
Saturday am Delivery
ERB245ERB145
316L /316L
Head / FittingEnd
ERB135
2,299.00£
2,439.00£
2,316.00£
2,638.00£
2,618.00£
2,758.00£
2,635.00£
2,957.00£
Highlands Scotland 2/3 days Scottish Isles Northern Ireland Ireland
DESCRIPTION
Next Day, up to 10 Kg excluding Isle of WightNext Day, up to 10 Kg RESIDENTIAL addresses excluding Isle of Wighta.m. Delivery10:30 am Delivery
£1.00/Kg
PRICE Upto 10Kg
£17.00£21.00£25.00£50.00£54.00£41.00
£106.00£42.00£47.00
Above 10Kg
£0.45/Kg£0.45/Kg£0.45/Kg£0.55/Kg£0.45/Kg£1.89/Kg£1.68/Kg£0.90/Kg
POST - Special Delivery SATURDAY by 1 pm UPTO 1 Kg £19.00 N/A
Tanks & Bunds Please Consult
Channel Islands & Isle of Man £106.00 £1.68/KgPOST - Special Delivery by 1 pm UPTO 1 Kg £9.70 N/APOST - Special Delivery by 9 am UPTO 1 Kg £26.50 N/A
33SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019L
MI
GA Range Features :Max flow upto 170L/hr
Max Pressure 12 Bar
Mechanically Operated PTFE coated Diaphragm
Variable Eccentric Drive Mechanism
Corrosion Resistant GRP Casing
IP55 rated
Proportional dosing available with Varipulse V Controller
Models upto GA45 in PP & PVDF are supplied with
Injection Valve, Foot Valve & 6m of Tubing
Model Numbering Example
Model ControlOutput Code Head Size Code Voltage Code Double Diaphragm
LE Type Fitting Connection
Model : GM
Output Code : See adjacent table
Liquid End Type : P = Polypropylene D = PVDF S = 316L V = Polypropylene (HV)
Head Size Code : 1, 4, or 6
Fitting Connection : T = PE flexible hose 6 x 8; reinforced PVC tubing 6 x 12 & G 1/2" male. Q = DN15 female socket
Voltage Code : 2 = 230V (50Hz) 3 = 415V (50/60Hz)
Double Diaphragm : C0 = without detection C5 = Ruptor detector by pressure gauge
Control Codes : V = Varipulse V F = Varipulse F
DRIVE ASSEMBLY & MOTOR SPECIFICATIONS
PART NUMBERS & PRICING
GA 2
GA 2
GA 2
GA 2
GA 5
GA 5
GA 5
GA 5
GA 10
GA 10
GA 10
GA 10
120
POWER 1Ph (W)
POWER 3Ph (W)
GA2 2.5 12 36 1500 180 90
GM12072 3000
180 120 3.5120 180
110
3000 180 120
GM170
2 C0 V
MILTON ROY G SERIES Dosing Pumps
PRESS.
(Bar) *SPEED SPM
MOTOR RPM
POWER 1Ph (W)
GA 5 P 1 T
POWER 3Ph (W)
MODELMAX FLOW
PRESS.
(Bar) *SPEED SPM
MOTOR RPM
MODELMAX FLOW
GA5 5 12 72 3000 180
120GA25 25 12 72 3000 180GA10 10 12 144 3000
End (240v) 2 (415v) 3 Balls
5083
PriceSpares Kit No.Tubing Sizes
180 120170 3.5 144 3000
120GA90 5144 3000 180
GA45 10 144
ModelLiquid Flow
L/Hr @ 1.5
Bar
Flow L/hr @ 12 Bar.
*
Valve / Seals
ceramic PVDF/ AFLASD1T 2.5 2.25 883.00£ 840.00£
ceramic PVDF/ AFLASP1T 2.5 2.25 791.00£ 748.00£
Prices Materials
Head / Fitting
PP/PVDF
PVDF/PVDF
316L/ 316LS1N 2.5 2.25 1,174.00£ 1,131.00£
316L PP/ PTFEV1H 2.5 2.25 1,007.00£ 964.00£ PP/PP (HV)
316L 316L
PVDF/PVDFD1T 5.0 4.5 912.00£ 870.00£
ceramic PVDF/ AFLAS 3071240181FPP/PVDFP1T 5.0 4.5 820.00£ 778.00£
ceramic PVDF/ AFLAS
316L/ 316LS1N 5.0 4.5 1,203.00£ 1,160.00£
316L PP/ PTFE 3071240148F9x12 tube(D) 15x23(S)PP/PP (HV)V1H 5.0 4.5 1,036.00£ 994.00£
316L 316L Female 1/2" BSP
D1T 10.0 9.0 952.00£ 909.00£
ceramic PVDF/ AFLASPP/PVDFP1T 10.0 9.0 860.00£ 817.00£
ceramic PVDF/AFLAS
S1N 10.0 9.0 1,242.00£ 1,200.00£
316L PP/ PTFE 9x12 tube(D) 15x23(S)PP/PP (HV)V1H 10.0 9.0 1,076.00£ 1,033.00£
316L 316L
3071240181F
3071240182F
3071240148F
123.00£
179.00£
123.00£
165.00£
179.00£
179.00£ Female 1/2" BSP316L/ 316L
6x12; 6x8 & 1/2"BSPPVDF/PVDF
6x12; 6x8 & 1/2"BSP
165.00£
179.00£
3071240147F
3071240148F
3071240182F
3071240181F
3071240147F
3071240182F
3071240147F
6x12; 6x8 & 1/2"BSP
6x12; 6x8 & 1/2"BSP
9x12 tube(D) 15x23(S)
Female 1/2" BSP
6x12; 6x8 & 1/2"BSP
6x12; 6x8 & 1/2"BSP
179.00£
123.00£
165.00£
179.00£
34 SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019 L
MI
PART NUMBERS & PRICING
GA 25
GA 25
GA 25
GA 25
GA 45
GA 45
GA 45
GA 45
GA 90
GA 90
GA 90
GA 90
GA 120
GA 120
GA 120
GA 120
Prices Materials
GA 170
GA 170
GA 170
GA 170
MANUFACTURER STRONGLY RECOMMENDS THE USE OF A PRESSURE RELIEF VALVE WITH MOTOR DRIVEN PUMPS
End (240v) 2 (415v) 3 Balls
PricesModel
Liquid Flow L/Hr
@ 1.5 Bar
Flow L/hr @ 12 Bar.
*
Valve / SealsMaterials
D4T 25.0 19.0 1,128.00£ 1,086.00£
ceramic PVDF/ AFLASP4T 25.0 19.0 1,036.00£ 994.00£
PVDF/ AFLAS
S4N 25.0 19.0 1,419.00£ 1,376.00£
316L PP/ PTFEPP/PP (HV)V4H 25.0 19.0 1,252.00£ 1,210.00£
D4T 45.0 38.0 1,178.00£ 1,135.00£
ceramic PVDF/ AFLAS 3071240185FPP/PVDFP4T 45.0 38.0 1,086.00£ 1,043.00£
ModelLiquid Flow
L/Hr @ 1.5
Bar
Flow L/hr @
5 Bar. *Valve / Seals
316L 316L 3071240157F316L/ 316LS4N 45.0 38.0 1,468.00£ 1,426.00£
Tubing SizesPrices Materials
Spares Kit No.
P6P 85.0 77.0 1,272.00£ 1,229.00£
End (240v) 2 (415v) 3 BallsHead / Fitting
PP/PVDF
V6H 85.0 77.0 1,613.00£ 1,571.00£
ceramic PVDF/ AFLAS 3071240152FD6P 85.0 77.0 1,409.00£ 1,366.00£ 1/2" NPT MALE
1/2" male(D) / 15x23(S)
PVDF/PVDF
PP/PP (HV)
S6N 85.0 77.0 1,889.00£ 1,846.00£
1/2" NPT MALE
Prices
1/2" BSP (F)316L /316L
D6P 120.0 108.0 1,483.00£ 1,440.00£
P6P 120.0 108.0 1,345.00£ 1,303.00£
D6P 170.0 153.0 1,557.00£ 1,514.00£
ceramic PVDF/ AFLASPP/PVDFP6P 170.0 153.0 1,419.00£ 1,376.00£
S6N 170.0 153.0 2,036.00£ 1,993.00£
316L PP/ PTFEV6H 170.0 153.0 1,761.00£ 1,718.00£
316L /316L
PP/PP (HV)
PVDF/PVDF
1/2" BSP (F)
1/2" male(D) / 15x23(S)
1/2" NPT MALE
316L 316L
ceramic PVDF/ AFLAS
316L 316L
316L PP/ PTFE
ceramic PVDF/ AFLAS
316L PP/ PTFE
257.00£
257.00£
End (240v) 2 (415v) 3 BallsHead / Fitting
183.00£
ModelLiquid Flow
L/Hr @ 1.5
Bar
Flow L/hr @ 10 Bar.
*
Valve / Seals
137.00£
179.00£
179.00£ 316L PP/ PTFE 3071240162FPP/PP (HV)V4H 45.0 38.0 1,302.00£ 1,259.00£
ceramic
ModelLiquid Flow
L/Hr @ 1.5
Bar
Flow L/hr @ 3.5 Bar.
*
Valve / SealsEnd (240v) 2 (415v) 3 Balls
ModelLiquid Flow
L/Hr @ 1.5
Bar
Flow L/hr @ 3.5 Bar.
*
End
S6N 120.0 108.0 1,962.00£ 1,920.00£
V6H 120.0 108.0 1,687.00£ 1,644.00£
183.00£
3071240185F 137.00£
(240v) 2 (415v) 3 BallsHead / Fitting
ceramic PVDF/ AFLAS
316L 316L 3071240150F
Female 1/2" BSP316L/ 316L
Prices
Head / Fitting
PP/PVDF
PVDF/PVDF ceramic
3071240186FPVDF/PVDF
316L 316L
Materials
6x12; 6x8 & 1/2"BSP
6x12; 6x8 & 1/2"BSP
296.00£
240.00£
Price
3071240152F
3071240152F
3071240149F
3071240150F
Spares Kit No.
296.00£
240.00£
3071240157F
3071240162F
3071240186F 179.00£
179.00£
257.00£
257.00£
Spares Kit No. Price
Spares Kit No. Price
9x12 tube(D) 15x23(S)
Price
3071240149F
3071240152F
6x12; 6x8 & 1/2"BSP
6x12; 6x8 & 1/2"BSP
Tubing Sizes
1/2" NPT MALE
9x12 tube(D) 15x23(S)
Female 1/2" BSP
Tubing Sizes
PVDF/ AFLAS
ceramic PVDF/ AFLAS
1/2" NPT MALE
1/2" NPT MALE
1/2" male(D) / 15x23(S)
1/2" BSP (F)
Tubing Sizes
Tubing SizesHead / Fitting
PP/PVDF
PVDF/PVDF
PP/PP (HV)
316L/ 316L
Materials
Valve / Seals
257.00£
257.00£
296.00£
240.00£
Price
3071240152F
3071240152F
3071240149F
3071240150F
Spares Kit No.
35SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019L
MI
GM Range Features :Max flow upto 500L/hr Max Pressure 12 Bar
Aluminium Housing IP55 rated
Mechanically Operated PTFE coated Diaphragm
Variable Eccentric Drive Mechanism Double Diaphragm available
Proportional dosing enabled with Varipulse V Controller and / or
Stegmann stroke actuator
Atex Certification available
Models upto GM50 in PP & PVDF are supplied with Injection Valve,
Foot Valve & 6m of Tubing
Model Numbering ExampleModel Control
Output CodeLE Type Head Size Code Fitting Connection Voltage Code Double Diaphragm
Model : GMOutput Code : See adjacent tableLiquid End Type : P = Polypropylene D = PVDF S = 316L V = Polypropylene (HV)Head Size Code : 1, 4, 40 or 50Fitting Connection : T = PE flexible hose 6 x 8; reinforced PVC tubing 6 x 12 & G 1/2" male. Q = DN15 female socketVoltage Code : 2 = 230V (50Hz) 3 = 415V (50/60Hz) 9 = Special, includes 110V 1HX = STD ATEX motorDouble Diaphragm : C0 = without detection C5 = Ruptor detector by pressure gaugeControl Codes : V = Varipulse V F = Varipulse F ST1 = 230V Servo Actuator ST3 = 110V Servo Actuator
DRIVE ASSEMBLY & MOTOR SPECIFICATIONS
PART NUMBERS & PRICING
GM 2
GM 2
GM 2
GM 2
GM 5
GM 5
GM 5
GM 5
GM 10
GM 10
GM 10
GM 10
MILTON ROY G SERIES Dosing Pumps
Tubing Sizes Spares Kit No.
6x12; 6x8 & 1/2"BSP
6x12; 6x8 & 1/2"BSP
9x12 tube(D) 15x23(S)
Female 1/2" BSP
6x12; 6x8 & 1/2"BSP
316L
Prices MaterialsValve / Seals
PVDF/ AFLAS
PVDF/ AFLAS
PP/ PTFE
316L
PVDF/ AFLAS
1,453.00£
(110v) 9 Balls
PVDF/AFLAS
PP/ PTFE
PVDF/PVDF
1,164.00£
1,258.00£
1,194.00£
1,288.00£
316L
316L
ceramic
ceramic
316L
1,384.00£
1,553.00£
1,623.00£
PVDF/PVDF
PP/PP (HV)
316L/ 316L
PP/PP (HV)
316L/ 316L
PP/PVDF
PVDF/PVDF
PP/PP (HV)
316L/ 316L
PP/PVDF
1,583.00£
1,234.00£
1,327.00£
MOTOR RPM
150015001500150015001500
1,413.00£
ceramic
ceramic
GM170GM240GM330GM400GM500
90909090
12
MAX FLOW
2.254.59
255085
PRESSURE (Bar)
12 150015001500
400500
150015001500
C0 V
PRESSURE (Bar)
777555
SPEED SPM
7214414414414418
MOTOR RPM
MODEL
GM120
POWER 3Ph (W)
9090
120120250250
POWER 1Ph (W)
180180180180180250
5
MAX FLOW
GM P 1 T 2
Head / Fitting
120170240315
107
POWER 1Ph (W)
18018018018072
14472
1212
PP/PVDF
SPEED SPM
180180
POWER 3Ph (W)
9090
ModelLiquid
End (240v) 2 (415v) 3
Flow L/Hr
@ 1.5 Bar
Flow L/hr @
Max press.
MODEL
GM2GM5
GM10GM25GM50GM90
3672
144
V1H 2.5 2.25 1,272.00£ 1,228.00£
D1T 2.5 2.25 1,146.00£ 1,102.00£
1,471.00£ 1,427.00£
V1H 5.0 4.5 1,301.00£ 1,258.00£
S1N
S1N 9.0 8.0 1,511.00£
P1T 2.5 2.25 1,052.00£ 1,009.00£
S1N 2.5 2.25 1,441.00£ 1,398.00£
5.0 4.5
1,039.00£ 3071240181F
D1T 5.0 4.5 1,176.00£ 1,132.00£
P1T 5.0 4.5 1,082.00£
6x12; 6x8 & 1/2"BSPPVDF/ AFLAS 3071240182F
1,467.00£
P1T 9.0 8.0 1,122.00£ 1,078.00£
V1H 9.0 8.0 1,341.00£
D1T 9.0 8.0 1,215.00£ 1,172.00£
1,298.00£
Price
3071240181F
3071240182F
3071240148F
3071240147F
123.00£
165.00£
179.00£
179.00£
123.00£
165.00£
Female 1/2" BSP
6x12; 6x8 & 1/2"BSP
9x12 tube(D) 15x23(S)
179.00£
3071240182F
3071240148F
3071240147F
3071240148F
3071240147F
ceramic
316L
316L
316L
ceramic
MANUFACTURER STRONGLY RECOMMENDS THE USE OF A PRESSURE RELIEF VALVE WITH MOTOR DRIVEN PUMPS
Female 1/2" BSP
179.00£
179.00£
123.00£
165.00£
179.00£
PP/ PTFE
316L
PVDF/ AFLAS 3071240181F
6x12; 6x8 & 1/2"BSP
9x12 tube(D) 15x23(S)
36 SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019 L
MI
PART NUMBERS & PRICING
GM 25
GM 25
GM 25
GM 25
GM 50
GM 50
GM 50
GM 50
GM 90
GM 90
GM 90
GM 90
GM 120
GM 120
GM 120
GM 120
GM 170
GM 170
GM 170
GM 170
GM 240
GM 240
GM 240
GM 240
GM 330
GM 330
GM 330
GM 330
GM 400
GM 400
GM 400
GM 400
GM 500
GM 500
GM 500
GM 500
1,956.00£
2,610.00£
Prices
PP/PVDF
PVDF/PVDF
PP/PP (HV)
316L /316L
Head / Fitting
Materials
(110v) 9
1,886.00£
1,973.00£
2,180.00£
2,460.00£
Valve / Seals Tubing Sizes
ceramic
ceramic
316L
316L
PP/ PTFE
316L/ 316L
Materials
(110v) 9
1,413.00£
2,036.00£
316L
316L
ceramic
1,956.00£
2,236.00£
1,737.00£
1,824.00£
2,031.00£
2,311.00£
1,812.00£
PVDF/PVDF
PP/PP (HV)
PP/PVDF
PP/PVDF
PVDF/PVDF
PP/PP (HV)
316L /316L
2,386.00£
1,961.00£
2,048.00£
2,255.00£
2,535.00£
316L /316L
PVDF/PVDF
PP/PP (HV)
316L /316L
1/2" BSP (F)
DN15 SOCKET
1/2" BSP Female
DN15 SOCKET
DN15 SOCKET
1/2" BSP (F)
DN15 SOCKET
1/2" BSP (F)
1,507.00£
1,633.00£
1,802.00£
1,463.00£
1,557.00£
1,683.00£
1,852.00£
PVDF/ AFLAS
PP/ PTFE
316L
1/2" BSP Female316L
316L
PP/PP (HV)
DN15 SOCKET
1/2" BSP (F)
DN15 SOCKET
1/2" BSP (F)
DN15 SOCKET
1/2" BSP (F)
DN15 SOCKET
1/2" BSP (F)
DN15 SOCKET
PP/PP (HV)
316L/ 316L
(110v) 9
1,587.00£
1,674.00£
1,881.00£
2,161.00£
1,662.00£
1,749.00£
Head / Fitting
PP/PVDF
PVDF/PVDF
DN15 SOCKET
1/2" BSP (F)
Valve / Seals Tubing Sizes
PVDF/ AFLAS
PVDF/ AFLAS
6x12; 6x8 & 1/2"BSP
6x12; 6x8 & 1/2"BSP
9x12 tube(D) 15x23(S)
Female 1/2" BSP
6x12; 6x8 & 1/2"BSP
6x12; 6x8 & 1/2"BSP
9x12 tube(D) 15x23(S)
Female 1/2" BSP
316L
ceramic
ceramic
316L
316L
ceramic
316L
316L
ceramic
316L
ceramic
ceramic
316L
ceramic
PVDF/AFLAS
PVDF/AFLAS
PP/ PTFE
3071240186F
1/2" BSP Female
PVDF/AFLAS
PP / PTFE
2,123.00£
ceramic
316L
PVDF/ AFLAS
PVDF/ AFLAS
PP/ PTFE
316L
PVDF/ AFLAS
PVDF/ AFLAS
PP/ PTFE
316L
PVDF/ AFLAS
1,899.00£
2,106.00£
PP/PTFE
316L
PVDF/AFLAS
316L
PP/PVDF
PVDF/PVDF
PVDF/AFLAS
PVDF/AFLAS
ceramic
Model
Liquid
End (240v) 2
D4T 25.0 19.0 1,395.00£
P4T 25.0 19.0 1,301.00£
Flow L/Hr
@ 1.5 Bar
Flow L/hr @
Max press.
25.0 19.0 1,521.00£ 1,477.00£
1,308.00£
S40N 85.0 77.0 2,167.00£ 2,123.00£
S4N 50.0 38.0 1,740.00£ 1,697.00£
V4H 50.0 38.0 1,571.00£ 1,527.00£
P4T 50.0 38.0
D40N
S40N 120.0 108.0 2,242.00£ 2,198.00£
S40N 170.0 153.0 2,317.00£ 2,273.00£
V40H 170.0 153.0 2,037.00£ 1,994.00£
D40N 170.0 153.0 1,830.00£ 1,787.00£
1,700.00£ P40Q 170.0 153.0
Valve / Seals
316L
PVDF/ AFLAS
Tubing Sizes
PVDF/ AFLAS
PVDF/ AFLAS
PP/ PTFEV4H
1,351.00£
Prices
PVDF/PVDF
PP/PP (HV)
316L/ 316L
ceramic1,351.00£ PP/PVDF
1,258.00£
(415v) 3
ceramic
ceramic
316L
Balls
ModelLiquid
End (240v) 2 (415v) 3
Flow L/Hr
@ 1.5 Bar
Flow L/hr @
Max press.
3071240157FS4N 25.0 19.0 1,690.00£ 1,647.00£
D4T 50.0 38.0 1,445.00£ 1,401.00£ ceramicPVDF/PVDF
MaterialsPrices
PP/PP (HV)
85.0 77.0 1,680.00£ 1,637.00£
P40Q 85.0 77.0 1,593.00£ 1,550.00£
P40Q 120.0 108.0 1,668.00£ 1,625.00£
V40H 85.0 77.0 1,887.00£ 1,844.00£
V40H 120.0 108.0 1,962.00£ 1,919.00£
D40N 120.0 108.0 1,755.00£ 1,712.00£
D40N 240.0 215.0 1,905.00£ 1,862.00£
P40Q 240.0 215.0 1,818.00£ 1,774.00£
Model
Liquid
S40N 240.0 215.0 2,392.00£ 2,348.00£
V40H 240.0 215.0 2,112.00£ 2,069.00£
P50Q 315 290 1,892.00£ 1,849.00£
End (240v) 2 (415v) 3
Flow L/Hr
@ 1.5 Bar
Flow L/hr @
Max press.
V50H 315 290 2,186.00£ 2,143.00£
D50N 315 290 1,979.00£ 1,936.00£
S50N 315 290 2,466.00£ 2,422.00£
D50N 400 368 2,054.00£ 2,011.00£
P50Q 400 368 1,967.00£ 1,924.00£
S50N 400 368 2,541.00£ 2,497.00£
V50H 400 368 2,261.00£ 2,218.00£
P50Q 500 460 2,042.00£ 1,999.00£
S50N 500 460 2,616.00£ 2,572.00£
V50H 500 460 1,962.00£ 1,919.00£
D50N 500 460 2,129.00£ 2,086.00£
316L
PP/PVDF
PVDF/PVDF
PP/PP (HV)
316L /316L
Head / Fitting
PP/PVDF
316L
137.00£ 3071240185F
3071240185F
3071240186F
3071240162F
Spares Kit No. Price
137.00£
179.00£
179.00£
183.00£
179.00£
179.00£
183.00£
309.00£
659.00£
527.00£
309.00£
DN15 SOCKET
309.00£
PVDF/ AFLAS
PP/ PTFE
3071240172F
3071240170F
3071240171F
3071240173F
3071240172F
3071240170F
338.00£
3071240044F
3071240046F
3071240048F
3071240050F
301.00£
915.00£
669.00£
338.00£
DN15 SOCKET
1/2" BSP Female
DN15 SOCKET
1/2" BSP Female
669.00£
301.00£
915.00£
669.00£
338.00£
3071240173F
301.00£
3071240171F
3071240170F
3071240171F
3071240173F
527.00£
377.00£
377.00£
1,743.00£
ceramic
316L
316L
3071240172F
915.00£
DN15 SOCKET
1/2" BSP Female
3071240044F
3071240046F
3071240048F
3071240050F
3071240044F
3071240046F
3071240048F
3071240050F
659.00£
527.00£
377.00£
316L /316L
PP/PVDF
Spares Kit No. PriceBalls
ceramic
Spares Kit No. PriceBalls
316L
316L
3071240162F
3071240157F
3071240044F
3071240046F
3071240048F
3071240050F
309.00£
659.00£
527.00£
377.00£
659.00£
37SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019L
MI
G Range Model B Features :Max flow upto 1200L/hr
Max Pressure 10 Bar
Mechanically Operated PTFE coated Diaphragm
Variable Eccentric Drive Mechanism
Aluminium Housing
IP55 rated
230/400V 3 phase motor
Oil bath lubricated
Model Numbering Example
G51 - 54 1Q
LE Type
Liquid End prefix
Motor Type
Drive
Drive : See Adjacent Table
Motor Type : Refers to special motor; 415V, (0.37kW for G51 & G52; 0.55kW for other models)
Liquid End Prefix : 54, 56 & 58 see adjacent table
LE Type : 1Q = Polypropylene 2N = PVDF 1H = High Viscosity 7N = 316L Stainless Steel
DRIVE ASSEMBLY & MOTOR SPECIFICATIONS
PART NUMBERS & PRICING
G51 9
G51 9 AFLAS
G51 9
G51 9
MILTON ROY G SERIES Dosing Pumps
9
MODEL MAX FLOW POWER KwPRESSURE (Bar) SPEED SPM MOTOR RPM MOTOR VOLTAGE
G529 175G519 90 0.37
0.371010
3672
15001500
230/400230/400
G589 430G539 345 0.55
0.55108
144180
15001500
230/400230/400
0.553.5 180 1500 230/400G739 950G689 590 0.55
0.557
3.5180144
15001500
230/400230/400
ModelLiquid Prices Materials
BallsValve or Seals Tubing Sizes
G789 1200
PriceEnd
Head / Fitting
ceramic PVDF AFLAS DN15(15x20)PVC 3071240044F 309.00£ 541Q 90 86 PP/PVDF
(415v) 3Ph
£1,940.00
Spares Kit No.Flow
L/hr @ 1.5 Bar
Flow L/Hr @ Max Press.
659.00£
541H 90 86
542N 90 86 PVDF/PVDF
527.00£ PP/PP (HV) 316L PP PTFE DN15(15x20)PVC 3071240048F
£2,526.00
£2,318.00
ceramic PVDF F 1/2" BSP 3071240046F
MANUFACTURER STRONGLY RECOMMENDS THE USE OF A PRESSURE RELIEF VALVE WITH MOTOR DRIVEN PUMPS
547N 90 86 316L /316L 316L 316L F 1/2" BSP 3071240050F 377.00£ £2,574.00
38 SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019 L
MI
G52 9
G52 9 AFLAS
G52 9
G52 9
G53 9
G53 9 AFLAS
G53 9
G53 9
G58 9
G58 9 AFLAS
G58 9
G58 9
G68 9
G68 9 AFLAS
G68 9
G68 9
G73 9
G73 9 AFLAS
G73 9
G73 9
G78 9
G78 9 AFLAS
G78 9
G78 9
ModelLiquid Prices Materials
Valve or Seals Tubing Sizes Spares Kit No. PriceEnd
Head / Fitting
Balls(415v) 3Ph
Flow L/hr @ 1.5 Bar
Flow L/Hr @ Max Press.
ceramic PVDF AFLAS DN15(15x20)PVC 3071240044F 309.00£ 541Q 175.0 168 PP/PVDF£1,998.00
659.00£
541H 175.0 168
542N 175.0 168 PVDF/PVDF
527.00£ PP/PP (HV) 316L PP PTFE DN15(15x20)PVC 3071240048F
£2,584.00
£2,318.00
ModelLiquid Prices Materials
Valve or Seals Tubing Sizes Spares Kit No.
ceramic PVDF F 1/2" BSP 3071240046F
PriceEnd
Head / Fitting
Balls
547N 175.0 168 316L /316L 316L 316L F 1/2" BSP 3071240050F 377.00£ £2,574.00
(415v) 3Ph
Flow L/hr @ 1.5 Bar
Flow L/Hr @ Max Press.
ceramic PVDF AFLAS DN15(15x20)PVC 3071240044F 309.00£ 541Q 345.0 331.0 PP/PVDF£2,419.00
659.00£
541H 345.0 331.0
542N 345.0 331.0 PVDF/PVDF
527.00£ PP/PP (HV) 316L PP PTFE DN15(15x20)PVC 3071240048F
£3,005.00
£2,739.00
ModelLiquid Prices Materials
Valve or Seals Tubing Sizes Spares Kit No.
ceramic PVDF F 1/2" BSP 3071240046F
PriceEnd
Head / Fitting
Balls
547N 345.0 331.0 316L /316L 316L 316L F 1/2" BSP 3071240050F 377.00£ £2,632.00
(415v) 3Ph
Flow L/hr @ 1.5 Bar
Flow L/Hr @ Max Press.
ceramic PVDF AFLAS DN15(15x20)PVC 3071240044F 309.00£ 541Q 430.0 412.0 PP/PVDF£2,430.00
659.00£
541H 430.0 412.0
542N 430.0 412.0 PVDF/PVDF
527.00£ PP/PP (HV) 316L PP PTFE DN15(15x20)PVC 3071240048F
£3,016.00
£2,750.00
ModelLiquid Prices Materials
Valve or Seals Tubing Sizes Spares Kit No.
ceramic PVDF F 1/2" BSP 3071240046F
PriceEnd
Head / Fitting
Balls
547N 430.0 412.0 316L /316L 316L 316L F 1/2" BSP 3071240050F 377.00£ £3,064.00
(415v) 3Ph
Flow L/hr @ 1.5 Bar
Flow L/Hr @ Max Press.
ceramic PVDF AFLAS DN25(25x32)PVC 3071240055F 509.00£ 561Q 590.0 573.0 PP/PVDF£2,941.00
1,894.00£
561H 590.0 573.0
562N 590.0 573.0 PVDF/PVDF
863.00£ PP/PP (HV) 316L PP PTFE DN25(25x32)PVC 3071240059F
£3,527.00
£3,261.00
ModelLiquid Prices Materials
Valve or Seals Tubing Sizes Spares Kit No.
ceramic PVDF Female 1" BSP 3071240057F
PriceEnd
Head / Fitting
Balls
567N 590.0 573.0 316L /316L 316L 316L Male 1" BSP 3071240062F 825.00£ £3,575.00
(415v) 3Ph
Flow L/hr @ 1.5 Bar
Flow L/Hr @ Max Press.
ceramic PVDF AFLAS DN25(25x32)PVC 3071240068F 604.00£ 581Q 950.0 920.0 PP/PVDF£3,645.00
1,959.00£
581H 950.0 920.0
582N 950.0 920.0 PVDF/PVDF
1,034.00£ PP/PP (HV) 316L PP PTFE DN25(25x32)PVC 3071240070F
£4,230.00
£3,965.00
ModelLiquid Prices Materials
Valve or Seals Tubing Sizes Spares Kit No.
ceramic PVDF Female 1" BSP 3071240164F
PriceEnd
Head / Fitting
Balls
587N 950.0 920.0 316L /316L 316L 316L Male 1" BSP 3071240072F 865.00£ £4,279.00
(415v) 3Ph
Flow L/hr @ 1.5 Bar
Flow L/Hr @ Max Press.
ceramic PVDF AFLAS DN25(25x32)PVC 3071240068F 604.00£ 581Q 1200.0 1112.0 PP/PVDF£3,677.00
ceramic PVDF Female 1" BSP 3071240164F 1,959.00£
581H 1200.0 1112.0
582N 1200.0 1112.0 PVDF/PVDF
1,034.00£ PP/PP (HV) 316L PP PTFE DN25(25x32)PVC 3071240070F
£4,262.00
£3,996.00
Male 1" BSP 3071240072F 865.00£ 587N 1200.0 1112.0 316L /316L 316L 316L£4,310.00
39SMART DIGITAL & MOTOR DRIVEN PUMPSLMI CATALOGUE 2019L
MI
Pressure Loading Valves / Features :Anti-Syphon Valves
Provides Accurate Dosing under Low or Erratic System Pressure
Back Pressure is adjustable from 0 - 150 psi (10.3 bar)
Also acts as an anti-syphon valveMaximum temperature 600C
Maximum pulsed flow rate allowed is 378L/hr
Maximum continuous flow rate allowed is 1135L/hr
Pressure Relief Valves Features : Protects pumps and Systems from overpressure in the pumps
discharge line, usually caused by blockages
Relief Pressure adjustable from 0 - 150 psi (10.3 bar)Maximum temperature 600C
Maximum pulsed flow rate allowed is 378L/hr
Maximum continuous flow rate allowed is 1135L/hr
Pulsation Dampeners Features : Removes pulsating flows from positive displacement pumps
Increases System Efficiency and Pump Life
Protects pipework, valves and instrumentation from vibration
Prevents Foam & Splashing of the discharged liquid.
To size, take the swept volume of the pump and multiply by 12
The closest size in the table below which is above the calculated
figure is the correct dampener
DescriptionPressure Relief ValvePressure Relief Valve
Part NumberBPM050-P
BPM050-PPBPM050-KBPM050-S
Part NumberPRM050-P
PRM050-PP £248.00£660.00£671.00
Pressure Relief ValvePressure Relief Valve
Spares Kit for Relief/Loading Valves
PRM050-KPRM050-S
RK001 £75.00
£587.00£716.00£802.00
PVDF PD **
£248.00£251.00£273.00£285.00£479.00£499.00£561.00£583.00
316L Al (260 bar)£188.00£203.00£239.00£251.00£344.00£365.00£542.00£566.00
04V1-Al£534.00 £498.00
£190.00£216.00 £210.00£196.00
£131.00
£1,215.00£1,296.00
£170.00DAMPERDAMPERDAMPERDAMPER
0.180.180.36
U000A01B1-XXU000A01V1-XXU001A01E1-XXU001A01V1-XXU002A01E1-XXU002A01V1-XXU003A01E1-XX
0.040.040.090.1
0.36U003A01V1-XX0.7
0.650.950.95
FPMEPDMFPM
EPDMFPM
U007A01E1-XXU007A01V1-XXU010A01E1-XXU010A01V1-XX
DAMPERDAMPERDAMPERDAMPER
Price£223.00£231.00£644.00£637.00
DAMPERDAMPERDAMPERDAMPER
Description UPVC PC **
Polypro PP **
£131.00£134.00£159.00
G Series Dosing Pump Spares & Accessories
Price£236.00
Size1/2" NPT
MaterialPVC
POLYPROPYLENEPVDF316L
Material
DescriptionPressure Loading ValvePressure Loading ValvePressure Loading ValvePressure Loading Valve
Size1/2" NPT1/2" NPT1/2" NPT1/2" NPT
Part Number Size (L)
£134.00£160.00£171.00
FPMEPDM
PVCPOLYPROPYLENE
PVDF316L ALL
1/2" NPT1/2" NPT1/2" NPT1/2" NPT
£226.00£234.00
BSP (F)
Press Max Bar **
Materials Bladder
BUTYLFPM
EPDMFPM
EPDM
1010101010
3/8"3/8"3/8"3/8"1/2"1/2"3/4"3/4"3/4"3/4"1"1"
10101010101010
18V1-Al18E1-Al18V1-Al05E1-Al05V1-Al04E1-Al
£351.00 £333.00 £861.00£454.00 £417.00
Prices Part No Prefix U0##A
26E1-Al26V1-Al26E1-Al26V1-Al18E1-Al
£814.00£303.00 £286.00£256.00 £248.00
£537.00
40 MOTOR DRIVEN ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
VARIPULSE MOTOR CONTROLLER Features :Allows automatic control of motor speed via pulse or
4-20mA depending on model
Supply voltage 230V to control a 415V motor
requires 10 amp MCB for supply protection
IP55 enclosure
Frequency 50/60 Hz
Upto 3 operating modes depending on model
Manual speed adjustment
Factory fitted accessory
Non ATEX only
* Factory Fitted Price only, Consult Sales Office for price for replacements
AUTOMATION SELECTION GUIDE
NO
YES
NO
YES
YES
NO
YES
YES
NO
VARIPULSE F
NO
NO
YES
NO
GM240
GM330
GM400
GM500
VARIPULSE V
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
PUMP DRIVE
GA2
GA5
GA10
GA25
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
YES
YES
YES
YES
YES
GM120
GM170
Pump mounted for GA/GM series pumps; 4-20mA ONLY£958.00£719.00VARIPULSE-F
GM10
GA45
GM25
GM50
GM90
GA90
GA120
GA170
GM2
GM5
MILTON ROY G SERIES AUTOMATION
VARIPULSE-V
Part Number Description Price *Pump mounted for GA/GM series pumps; Manual, Pulse & 4-20mA
41MOTOR DRIVEN ACCESSORIES & SPARESLMI CATALOGUE 2019L
MI
STEGMANN ELECTRONIC SERVOMOTOR Features :Allows automatic control of stroke size via
0-20mA, 4-20mA, 0-10 volt & 2-10volt signals
Nominal voltage: 230V or 110V single phase
IP65 enclosure
Manual adjustment
Factory fitted accessory
Non ATEX only
* Factory Fitted Price only, Consult Sales Office for price for replacements
AUTOMATION SELECTION GUIDE
GM500 YES
GA2
GA5
GA10
GA25
GA45
GA90
GA120
GA170
GM2
GM5
GM10
GM25
GM50
GM90
GM120
PUMP DRIVE STEGMANN ACTUATOR
NO
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
GM330
GM400
YES
YES
GM170
GM240
YES
YES
ST-3 Electronic Servomotor actuator for use with GM series pump (110V) £1,793.00
MILTON ROY G SERIES AUTOMATION
Part Number Description Price *ST-1 Electronic Servomotor actuator for use with GM series pump (230V) £1,793.00
42 MOTOR DRIVEN ACCESSORIES & SPARESLMI CATALOGUE 2019 L
MI
LIQUITRON 7000 Series Multi-Parameter Controller
Water treatment just got easier with the new LIQUITRON 7000 Series controller. When paired with yourLMI metering pump, the controller's 7" (17.8cm) full colour touchscreen and intuitive user interfaceprovides seamless setup and operation. This single controller combines all the application functionality of the four LIQUITRON standard controllers: DC4000, DC4500, DR5000 and DP5000. The LIQUITRON 7000Series is fully equipped and ready to control your boiler, cooling tower, pH and ORP applications out of the box.
Features :The Setup Wizard simplifies installation with step-by-step configurations for common applications.
See status at a glance and tap into process data to optimize system health.
Available with (optional) cloud based LMI ConnectTM
providing process analytics and mobile access.
Multivoltage 115/230 VAC 50/60Hz
7" full colour touchscreen
Data recorded every minutetransferable to USB (1 year capacity)
Two flow meter, one flow switch and four Tank Low inputs
Two pulse & two 4-20mA outputs
Four Pump relays, Blowdown valve & alarm relays
GSM global remote connectivity
Mounting bracket for easy installation
Control Blowdown, Biocides, Acid/Base,
Inhibitor with 4 modes & Oxidiser/Reducer
NEW LMI PROCESS CONTROLLERS NEW
43PROCESS CONTROLLERSLMI CATALOGUE 2019L
MI
DC 4000 Series Conductivity Cooling Tower Water/Boiler Water ControllerFeatures :
Provides a conductivity set point and relay for TDS ControlMeasurement range from 0 - 20,000 uS/cm or 0 - 12,000ppm TDS Rising/Falling trip pointsHigh & Low alarm with relayTemperature in Celcius or Fahreheit4-20mA output, (Non Isolated)Flow Switch compatible
Four Time Feed modes; Water Meter Impulse, Feed as % of timeFeed as % of bleed, Feed & BleedBacklit LCD Alpha/Numeric DisplaySupplied with probe, PVC tee and 1000uS/cm buffer solution
DC 4500 Series Conductivity Cooling Tower Water/Boiler Water Controller
Features above DC 4000:Dual Biocide addition - 28 day programmable 1,2,3 or 4 weekselectableBiocide Lockout timer 1 - 999 minutesBiocide Prebleed - time or uS/cm
DP 5000 Series pH Controller
Features :Measurement range 0 - 14In-Line or Batch operationOn/Off Relay or proportional outputs for twopump control.Independent high/low alarm.Relay output to Activate solenoid ValveTimer Functions for pump run timeOptional 4 - 20mA outputComplete with electrode, PVC tee & buffers
DR 5000 Series REDOX Controller
Features :Measurement range -2000 mV to +2000 mVIn-Line or Batch operationOn/Off Relay or proportional outputs for twopump control.Independent high/low alarm.Relay output to Activate solenoid ValveTimer Functions for pump run timeOptional 4 - 20mA outputComplete with electrode, PVC tee & buffer
LMI PROCESS CONTROLLERS
The controllers above are AVAILABLE FOR A LIMITED TIME ONLY
44 PROCESS CONTROLLERSLMI CATALOGUE 2019 L
MI
Accessories (Conductivity)
(pH)
(REDOX)
CO-1 150ml of 475mV (+/-10mV) ORP buffer solution £13.11
SUB-PH4 18" Dip Tube immersion assembly c/w cap for tank applications £30.00CAB-EXT Electrode extension cable with BNC plug. Max length 25m (Min order 5m) £3.33
PH4-TEE 3/4" PVC tee for use with electrode £18.00SH4-TEE 3/4" Stainless Steel tee temperatures over 600C £9.00
CA4-10 3m cable assembly for use with ORP4-00C £131.00CA4-25 8m cable assembly for use with ORP4-00C £187.00
ORP4-25S (+/-) 5000mV ORP electrode with sealed entry, 8m cable, 0 - 1050C £243.00ORP4-00C pH Electrode with IP55 connector for use with CA4-10/25, range 0 - 1050C £225.00
Accessories
Part Number Description PriceORP4-10S (+/-) 5000mV ORP electrode with sealed entry, 3m cable, 0 - 1050C £198.00
CP-2 150ml pH 4 buffer solution £12.06CP-3 150ml pH 10 buffer solution £7.74
SUB-PH4 18" Dip Tube immersion assembly c/w cap for tank applications £30.00CAB-EXT Electrode extension cable with BNC plug. Max length 25m (Min order 5m) £3.33
PH4-TEE 3/4" PVC tee for use with electrode & PT100 temperature sensor £18.00SH4-TEE 3/4" Stainless Steel tee temperatures over 600C £9.00
CA4-10 3m cable assembly for use with PH4-00C £131.00CA4-25 8m cable assembly for use with PH4-00C £187.00
PH4-25S pH Electrode with sealed entry, 8m cable working range 0 - 1050C £208.00PH4-00C pH Electrode with IP55 connector for use with CA4-10/25, range 0 - 1050C £182.00
Accessories
Part Number Description PricePH4-10S pH Electrode with sealed entry, 3m cable working range 0 - 1050C £168.00
CC-1 1000uS/cm Standard Solution (150ml) £13.2114853 Extension cable (minimum 5m) priced per metre £2.00
32383-D 18" Dip Probe Holder £103.0032383-DP 32576 probe complete with 18" Dip Probe Holder £351.00
32576Carbon Probe with locating pin for use with AC1000; DC1000; DC4000 & 4500 (Pre April
1999)£322.00
32383 PVC 3/4" Tee for in-line systems. £62.00
34761Boiler Probe Assembly for DC4000 only, c/w electrode, coduit box and sampling
cross. Max temperature 2040C, Max Pressure 17.3 Bar£332.00
34759 Stainless Steel Boiler Probe £233.00
35660 3/4" NPT PVC Tee for use with 34659 carbon probe £61.0036130 Flow switch with 3/4" NPT connections, will activate below 170L/hr £162.00
34659 Carbon Probe with locating pin (April 1999 onwards) £214.0035659 As 34659 above but c/w PVC union 3/4" NPT Tee £221.00
DR5000-1 110V REDOX Controller with relay or proportional pulse output control £1,541.00DR5000-5 240V REDOX Controller with relay or proportional pulse output control
Part Number Description Price
DP5000-1 110V pH Controller with relay or proportional pulse output control £1,474.00DP5000-5 240V pH Controller with relay or proportional pulse output control
DC4500-1 110V Conductivity Cooling Tower Process Controller c/w Twin Biocide Timers £1,049.00DC4500-5 240V Conductivity Cooling Tower Process Controller c/w Twin Biocide Timers
DC4000-1 110V Conductivity Cooling Tower Process Controller £825.00DC4000-5 240V Conductivity Cooling Tower Process Controller
Part Number Description Price
45PROCESS CONTROLLERSLMI CATALOGUE 2019L
MI
DPH 3000 pH Controller Features :
Supplied with electrode, 3/4" PVC Tee and calibration solutionEasy to use keypad for programming & calibrationUniversal Power supply from 90 - 240VMeasurement range from 0 - 14 across the pH scale2 on/off and 2 pulse proprtional control outputs4 - 20 mA output (isolated)RS232 serial port
LDS-PH-PLUS pH Controllers with remote connectivity optionsFeatures :
Supplied with electrode, 3/4" PVC Tee and calibration solutionEasy Nav Encoder Wheel for simple menu findingUniversal Power supply from 90 - 240VMeasurement range from 0 - 14 across the pH scale2 on/off and 2 pulse proprtional control outputs4 - 20 mA output (Non-isolated)
ERMES web communication option. May require Data SIM CardMODBUS serial communication option
LDS-RH REDOX Controllers with remote connectivity options
Supplied with electrode, 3/4" PVC Tee and calibration solutionEasy Nav Encoder Wheel for simple menu findingUniversal Power supply from 90 - 240VMeasurement range from -1000mV - +2000mV1 on/off and 1 pulse proprtional control outputs4 - 20 mA output (Non-isolated)ERMES web communication option. May require Data SIM CardMODBUS serial communication option
LDS-CL Chlorine Controllers with remote connectivity options
Features :Easy Nav Encoder Wheel for simple menu findingUniversal Power supply from 90 - 240VMeasurement range from 0 - 10 mg/l (ppm)1 on/off and 1 pulse proprtional control outputsOptional 4 - 20 mA output (Non-isolated)ERMES web communication option. May require Data SIM CardMODBUS serial communication optionOpen Amperometric cell provides accurate and reliable readingEasy maintenance with self cleaning platinum/copper electrodesMaximum flow 30 L/hrMaximum Pressure 5 Bar
Remote Connectivity is realised using the ERMES WEB APP which allows users to read, analyse data and modify instrument parameters using a PC, smartphone or tablet. With ethernet or GSM/GPRS options there is a system for any site.
LDS SERIES PROCESS CONTROLLERS
46 PROCESS CONTROLLERSLMI CATALOGUE 2019 L
MI
PART NUMBERS & PRICING
(pH)
(REDOX)
Accessories (Chlorine)
Part Number Description Price
DPH 3000
LDS-PH-PLUS90 - 240V pH Controller with 2 relay & 2 proportional pulse outputs
(Remote Connectivity Option)
£1,169.00
£1,283.00
GSM-MODGSM modem in the LD Series Controllers allows connection to the ERMES WEB APP. c/w
Antenna, requires Data SIM Card appropriate to network coverage £640.00
LDS-CL90 - 240V Chlorine Controller with 1 relay & 1 proportional pulse outputs
(Remote Connectivity Optional)£640.00
LAN-COM
90 - 240V pH Controller with 2 relay & 2 proportional pulse outputs
LAN network card and RJ-45 cable allows connection between The LD Series controller and the ERMES WEB APP
£195.00
LDS-RH90 - 240V REDOX Controller with 1 relay & 1 proportional pulse outputs
(Remote Connectivity Optional)£1,360.00
Replacement Glass Cleaning Balls £28.00
78083 Proximity Flow Switch £93.00
Part Number Description Price78029 Platinum & Copper Electrode. 0 - 10mg/l (ppm) £610.00
78082 5" water filter with washable cartridge £59.00
78070 Activated carbon filter cartridge for use with 78082 to remove Chlorine £44.00
Accessories
Part Number Description Price
PH4-10S pH Electrode with sealed entry, 3m cable working range 0 - 1050C £168.00
CP-3 150ml pH 10 buffer solution £7.74
CA4-10 £131.00
CA4-25 8m cable assembly for use with PH4-00C £187.00
PH4-25S
78028
CP-2 150ml pH 4 buffer solution £12.06
78069 PT 100 temperature sensor £93.00
pH Electrode with sealed entry, 8m cable working range 0 - 1050C £208.00
PH4-00C
3m cable assembly for use with PH4-00C
£182.00
SUB-PH4 18" Dip Tube immersion assembly c/w cap for tank applications £30.00
CAB-EXT Electrode extension cable with BNC plug. Max length 25m (Min order 5m) £3.33
PH4-TEE 3/4" PVC tee for use with electrode & PT100 temperature sensor £18.00
SH4-TEE 3/4" Stainless Steel tee temperatures over 600C £9.00
£187.00
ORP4-25S (+/-) 5000mV ORP electrode with sealed entry, 8m cable, 0 - 1050C £243.00
ORP4-00C pH Electrode with IP55 connector for use with CA4-10/25, range 0 - 1050C £225.00
Accessories
Part Number Description PriceORP4-10S (+/-) 5000mV ORP electrode with sealed entry, 3m cable, 0 - 1050C £198.00
CO-1 150ml of 475mV (+/-10mV) ORP buffer solution £13.11
pH Electrode with IP55 connector for use with CA4-10/25, range 0 - 1050C
SUB-PH4 18" Dip Tube immersion assembly c/w cap for tank applications £30.00
CAB-EXT Electrode extension cable with BNC plug. Max length 25m (Min order 5m) £3.33
PH4-TEE 3/4" PVC tee for use with electrode £18.00
SH4-TEE 3/4" Stainless Steel tee temperatures over 600C £9.00
CA4-10 3m cable assembly for use with ORP4-00C £131.00
CA4-25 8m cable assembly for use with ORP4-00C
47PROCESS CONTROLLERSLMI CATALOGUE 2019L
MI
MROY Features :Upto 310 L/Hr & 123 BarAccuracy +/- 1 %ATEX Conformity & API 675 CompliantOperating Temp -40 0C to +50 0CLiquid Temp Upto + 88 0CService Life in excess of 20 yearsHydraulically Actuated Diaphragm
MAXROY Features :Upto 1,110 L/Hr & 28 BarAccuracy +/- 1 %ATEX Conformity & API 675 CompliantOperating Temp -40 0C to +50 0CLiquid Temp Upto + 90 0CService Life in excess of 20 yearsHydraulically Actuated Diaphragm
MILROYAL D Features :Upto 345 L/Hr & 500 BarAccuracy +/- 1 %ATEX Conformity & API 675 CompliantOperating Temp -40 0C to +50 0CLiquid Temp Upto + 110 0CService Life in excess of 20 yearsHydraulically Actuated Diaphragm
POWEROYAL Features :Upto 26,145 L/Hr & 350 BarAccuracy +/- 1 %ATEX Conformity & API 674 CompliantOperating Temp -20 0C to +50 0CLiquid Temp + 80 0CService Life in excess of 20 years
PRIMEROYAL Features :Upto 70,000 L/Hr & 1034 BarATEX Conformity & API 675 CompliantOperating Temp -40 0C to +50 0CBuilt for Extreme ConditionsService Life in excess of 20 years
Milton Roy Industrial Dosing Pumps
48 MILTON ROY INDUSTRIAL PUMPSLMI CATALOGUE 2019 L
MI
A Range of Non-Electric, Liquid Driven Proportional Injectors, designed with a patented internal mixing chamber which segregates any harsh chemicals from critical internal components. Full Range of replacement & serviceable
Accuracy +/- 10% Accuracy +/- 5%
Repeatability +/- 3% Repeatability +/- 3%
Max Fluid Temp 380C Max Fluid Temp 380C
Min Fluid Temp 10C Min Fluid Temp 10C
Max Vertical 3.6 m Max Vertical 3.6 m
Suction Lift Suction Lift
Seal Materials Aflas Seal Materials Aflas
Available Viton Available Viton
EPDM EPDM & Kalrez
Features : Features :Proprietary Composite Housing for chemical As for MiniDos with the inclusion of :-
Compatability, exceeding that of PVDF. Interchangeable lower ends
Built in on/off switch Highly Aggressive, Chemically Resitant models available.
Highest Standard Operating Pressure Diesel Fuel-friendly models available
SPECIFICATION & PRICINGMINIDOS SERIES PUMPS
SUPERDOS SERIES PUMPS
MINIDOS SERIES SPARES
SUPERDOS SERIES SPARES
Other kits available, contact sales office for further details
Dilution Rate (Ratio)Dilution Rate
(%)Water Flow Rate
Range (L/Hr)1:4000 - 1:2500.025 - 0.47 - 27000.5 - 9.6
0.2 - 2.5 1:500 - 1:40
PricePART NUMBERPressure Range
(BAR)Water Flow Rate
Range (L/Hr)Dilution Rate
(%)Dilution Rate (Ratio)
parts available.
£284.00MiniDos 10% 0.5 - 4.5 16 - 2200 2.0 - 10.0 1:50 - 1:10£270.00
PricePART NUMBERPressure Range
(BAR)£352.00
1:200 - 1:400.5 - 2.57 - 27000.5 - 9.6MiniDos 0.4%MiniDos 2.5%
WATER DRIVEN INJECTION PUMPS
£447.00SuperDos 45 2.5% 0.4 - 6.9 57 - 10000 0.2 - 2.5 1:500 - 1:40SuperDos 30 5% 0.4 - 6.9 34 - 6800 0.4 - 5.0 1:250 - 1:20 £399.00
SuperDos 20 2.5% 0.4 - 6.9 11 - 4500 0.2 - 2.5 1:500 - 1:40 £332.00SuperDos 20 0.3% 0.4 - 6.9 11 - 4500 0.025 - 0.3 1:4000 - 1:333
SuperDos 30 5%£36.00£36.00
SuperDos 15 2.5%SuperDos 20 0.3%
£36.00£33.00
DESCRIPTION PRICE
Kit A PISTON & O RINGKit A PISTON & O RING
PRICE£35.00£22.00£23.00
PUMP PART NUMBER
SuperDos 20 2.5%
011109VGB011055VGB011082VGB
DESCRIPTION Kit A PISTON & O RING
£386.00£414.00SuperDos 15 2.5% 0.2 - 4.1 10 - 3400
£36.00
SuperDos RangeMiniDos Range
SuperDos 45 2.5%
011850VGB012310GB
011850VGB011852PVGB011850VGB
Kit A PISTON & O RINGKit A PISTON & O RINGKit A PISTON & O RINGKit A PISTON & O RINGKit A PISTON & O RING
PUMPMiniDos 0.4%MiniDos 2.5%MiniDos 10%
PART NUMBER
49OTHER DOSING PRODUCTSLMI CATALOGUE 2019L
MI
CLASSIC SERIES SINGLE HEAD
Features :
Self-Priming and Run dry capable Suction Lift : 7.6 m
Max Viscosity : 10,000cps (reduced output) Accuracy +/- 2%
Fixed or Adjusted Output versions Manually adjustable from 5 - 100% with turn of a dial
Fixed speed motor IP44 Resistant
Vertical or Horizontal Mounting
Supplied with 6 m, foot strainer and 1/2" injection valve
CLASSIC SERIES DOUBLE HEAD
Features :
As per Single Head version
Twin Headed Pump allows two chemicals to be dosed simultaneously.
Peristaltic Dosing Pumps
50 OTHER DOSING PRODUCTSLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICING
CLASSIC SINGLE HEAD
CLASSIC DUAL HEAD
FIXED OUTPUT
ADJUSTABLE OUTPUT
2.78 7 6 mm
N Y
2.15 2 6 mm
0.38 1 6 mm N Y
6 mm Y
1.26 2 6 mm N Y
N Y
£773.00£773.00
170MDCHP34 N/A 2 x 2.14 2 6 mm N Y170MDCHP9 N/A 2 x 0.62 1 6 mm N Y £773.00
£773.00
100MDCHP20 N/A 2 x 1.26 2 6 mm N Y100MDCHP5 N/A 2 x 0.37 1 6 mm N Y
£732.00£732.00
170MDC5 N/A 2 x 10.72 5 6 mm N Y170MDC4 N/A 2 x 7.57 4 6 mm N Y £732.00
£732.00
170MDC3 N/A 2 x 5.04 3 6 mm N Y170MDC2 N/A 2 x 2.14 2 6 mm N Y
£732.00
170MDC1 N/A 2 x 0.62 1 6 mm N Y100MDC5 N/A 2 x 6.30 5 6 mm N Y £732.00
£732.00
100MDC4 N/A 2 x 4.41 4 6 mm N Y100MDC3 N/A 2 x 2.77 3 6 mm N Y100MDC2 N/A 2 x 1.26 2 6 mm N Y100MDC1 N/A 2 x 0.37 1 6 mm N Y
PART No.MIN FLOW
L/HrMAX FLOW
L/HrFEED TUBE
No.TUBING
SIZE
85MHP40
0.04 0.63 1 6 mm85MHP585MHP17
2.78 7 6 mm N Y
0.25 5.05 7 6 mm0.1 2.15 2 6 mm N Y
Y N5.05
6 mm N Y
10.73 5 6 mm N Y7.57 4 6 mm N Y
Y N
7 N
N Y
Y N
6 mm N Y45M4 0.21 4.42 4 6 mm N Y45M3 0.14 2.78 345M2 0.06 1.26 2 6 mm N Y
85MP5 N/A 10.73
45M1 0.03 0.38 1 6 mm N Y
5 6 mm Y
£380.00£380.00
1.72 bar
1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar
£380.00
£529.00£529.00£529.00
MAX PRESSURE
45MP345MP2 N/A 1.26 2 6 mm Y
1.72 bar1.72 bar1.72 bar
45MHP22 0.1445MHP10 0.0645MHP2 0.03
85MPHP40 N/A85MPHP17 N/A
NN/A 2.78 3 6 mm Y N
6.31 5 6 mm Y
85MPHP5 N/A 0.63 1 6 mm Y N 6.9 bar
N6 mm Y N
1.72 bar85MP3 N/A 5.0585MP4 N/A 7.57
85MP1 N/A 0.6385MP2
45MPHP22 N/A45MPHP10 N/A45MPHP2 N/A
1.26 2 6 mm0.38 1 6 mm Y N
85M5 0.5485M4 0.3885M3 0.25 5.05 3 6 mm85M2 0.1
Y45M5 0.32 6.31 5 6 mm N Y85M1 0.04 0.63 1 6 mm N
2.15 2
445MP5 N/A
N4 6 mm Y N3 6 mm Y N
N/A 2.15
N/A 0.38 1 6 mm Y
MIN FLOW L/Hr
MAX FLOW L/Hr
FEED TUBE No.
45MP1
PART No.TUBING
SIZEFIXED
OUTPUTADJUSTABLE
OUTPUT
N
2 6 mm Y N1 6 mm Y N
45MP4 N/A 4.42
PRICE
230 V
MAX PRESSURE
1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar6.9 bar6.9 bar6.9 bar6.9 bar
£732.00£732.00£732.00
1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar
1.72 bar1.72 bar1.72 bar1.72 bar1.72 bar
6.9 bar6.9 bar6.9 bar
6.9 bar6.9 bar
6.9 bar6.9 bar6.9 bar6.9 bar6.9 bar6.9 bar
PRICE
230 V£380.00£380.00£380.00£380.00£380.00£380.00£380.00
£529.00£529.00£529.00£529.00£529.00£529.00£529.00
£401.00
£549.00£549.00£549.00
£401.00£401.00£401.00£401.00£401.00
£549.00£549.00£549.00
51OTHER DOSING PRODUCTSLMI CATALOGUE 2019L
MI
SVP SERIES
Features :
Self-Priming and Run dry capable Suction Lift : 7.6 m
Max Viscosity : 10,000cps (reduced output) Accuracy +/- 2%
Digitally adjusted motor speed, Manual or External Control Via 4 - 20mA
Automatic via keypad or external device IP44 Resistant
Vertical or Horizontal Mounting Supplied with 6 m, foot strainer and 1/4" injection
valve
ECON LD SERIES
Features :
Low Continuous Flow 1.3 - 240 ml/hr depending on model
Variable Speed Motor 50:1 turn down via potentiometerMax Operating Temperature : 400C
Max Working Pressure 5.5 bar
Polycarbonate Housing
Santoprene Tubing & Duckbill Check Valves (FDA Approved)
Peristaltic Dosing PumpsPeristaltic Dosing Pumps
52 OTHER DOSING PRODUCTSLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICINGSVP SERIES
ECON LD SERIES
SPARESPUMP HEAD SERVICE KITS PUMP HEAD ASSEMBLIES
QP171K to QP175K includes QP691K to QP697K includes
1 Santoprene tube, 2 Connecting nuts 1 Santoprene tube, 2 Connecting nuts
1 Roller Assy, 2 Cover Screws 1 Roller Assy, 2 Cover Screws
3 Ferrules (6mm) 3 Ferrules (6mm), 1 Duckbill
PUMP TUBE & ACCESSORIESECON PUMP HEAD PARTS
ECON MOTOR PARTSPRICE
92.00£
10.00£
95.00£
27.00£
PART No.
EC301
EC302
EC310
EC330
DESCRIPTION
Brushless DC Motor
Drive Assembly Pad
Gear Kit: Spacers, Screws and Aquashield
Gear Case Front Cover
£11.00
£19.00
£24.00
DESCRIPTION
(x 2) No. 1 Santoprene Tube Assy.
(x 2) No. 2 Santoprene Tube Assy.
(x 2) No. 3 Santoprene Tube Assy.
(x 2) No. 4 Santoprene Tube Assy.
(x 2) No. 5 Santoprene Tube Assy.
(x 2) No. 7 Santoprene Tube Assy.
(x 2) No. 2 Versilon Tube Assy.
(x 2) No. 5 Versilon Tube Assy.
Injection for 1.7 bar M series (No Duckbill)
Injection for 6.9 bar M series (No Duckbill)
6mm Suction Strainer c/w ceramic weight
£39.00
£39.00
£58.00
£58.00
Pump Head Cover
PRICE
22.00£
22.00£
11.00£
PRICE
£39.00
£39.00
£39.00
£39.00
PART No.
EC350
EC351
EC355
DESCRIPTION
White Roller Assembly
Black Roller Assembly
QuickPro Head Assy; No.1 Tube 6.9 bar
QuickPro Head Assy; No.2 Tube 6.9 bar
QuickPro Head Assy; No.7 Tube 6.9 bar
PART No.
QP171-1
QP172-1
QP173-1
QP174-1
QP175-1
QP691-1
QP692-1
QP697-1
QP174-1
QP175-1
QP691-1
QP692-1
QP697-1
QuickPro Head Assy; No.2 Tube 6.9 bar
QuickPro Head Assy; No.7 Tube 6.9 bar
QuickPro Head Assy; No. 4 Tube 1.7 bar
QuickPro Head Assy; No.5 Tube 1.7 bar
DESCRIPTION
No. 1 ; QuickPro Collapsable Roller / 1.7 bar
No. 2 ; QuickPro Collapsable Roller / 1.7 bar
No. 3 ; QuickPro Collapsable Roller / 1.7 bar
No. 4 ; QuickPro Collapsable Roller / 1.7 bar
No. 5 ; QuickPro Collapsable Roller / 1.7 bar
No. 1 ; QuickPro Collapsable Roller / 6.9 bar
No. 2 ; QuickPro Collapsable Roller / 6.9 bar
No. 7 ; QuickPro Collapsable Roller / 6.9 bar
PRICE
£53.00
£53.00
£53.00
£53.00
£53.00
£57.00
£57.00
£57.00
PART No.
QP171K
QP172K
QP173K
QP174K
QP175K
QP691K
QP692K
QP697K
PART No.
UCCP-21CE
UCCP-22CE
UCCP-23CE
UCCP-24CE
UCCP-25CE
UCCP-27CE
UCTY-2CE
UCTY-5CE
UCAK-3CE
UCINJCE
ST106
PRICE
£128.00
£128.00
£128.00
£128.00
£128.00
£138.00
£138.00
£138.00
£128.00
£128.00
£138.00
£138.00
£138.00
DESCRIPTION
QuickPro Head Assy; No.1 Tube 1.7 bar
QuickPro Head Assy; No.2 Tube 1.7 bar
QuickPro Head Assy; No.3 Tube 1.7 bar
QuickPro Head Assy; No.4 Tube 1.7 bar
QuickPro Head Assy; No.5 Tube 1.7 bar
QuickPro Head Assy; No.1 Tube 6.9 bar
PART No.MIN FLOW
L/HrMAX FLOW
L/HrFEED TUBE
No.TUBING
SIZEMANUAL
AUTOMATIC 4 -20mA
£933.00
SVP1L2 0.125 2.7 2 6 mm Y NSVP1L1 0.046 0.79 1 6 mm Y N
SVP1L4 0.475 9.5 4 6 mm Y NSVP1L3 0.317 6.3 3 6 mm Y N
SVP1L5 0.679 13.4 5 6 mm Y N £933.00£1,143.00£1,143.00£1,143.00
SVP4L1 0.046 0.79 1 6 mm N Y
SVP4L3 0.317 6.3 3 6 mm N YSVP4L2 0.125 2.7 2 6 mm N Y
£933.00
SVP4L5 0.679 13.4 5 6 mm N YSVP4L4 0.475 9.5 4 6 mm N Y £1,143.00
£1,143.00
SVP1H2 0.125 2.7 2 6 mm Y NSVP1H1 0.046 0.79 1 6 mm Y N
SVP4H1 0.046 0.79 1 6 mm N YSVP1H7 0.317 6.3 7 6 mm Y N
SVP4H7 0.317 6.3 7 6 mm N YSVP4H2 0.125 2.7 2 6 mm N Y
PRICE
E10LHMC5SE10LHFC5S
MF
1.33.2
70.0240.0
5.55.5
50:150:1
MIN FLOW ml/Hr
MAX FLOW ml/Hr
MAX PRESSURE bar
TURN DOWN
£458.00£458.00
PART No. PUMP TUBE
£1,143.00£1,143.00
1.7 bar1.7 bar1.7 bar1.7 bar1.7 bar1.7 bar1.7 bar1.7 bar1.7 bar1.7 bar6.9 bar6.9 bar6.9 bar6.9 bar6.9 bar6.9 bar
£933.00£933.00£933.00
£933.00£1,143.00
£933.00
MAX PRESSUREPRICE230 V
53OTHER DOSING PRODUCTSLMI CATALOGUE 2019L
MI
Features :Chemical Feeders designed for use with Bromine Tablets
The K900 Series have adjustable feed rate control with Max Pressure 3.5 Bar
SC Series provide higher pressure capabilities (5.5 Bar) complete with rotameter, isolation valve
and pre-assembled pipework.
Specifications & Pricing
B95 "O" ring for K940 / K960 models £23.00
FMF Flow Meter with fittings & Support Bracket £384.00
SC10-0536Kg High Pressure Model with
pre-assembled pipework & Support Bracket£1,379.00
K941PP Cap with "O" ring for K940 / K960 models £72.00
K9604.5 Kg Off - Line RETRO Fit Feeder
(Partial Flow Through Unit)£204.00
SC10S-0218Kg High Pressure Model with
pre-assembled pipework & Support Bracket£1,292.00
BROMINATORS
PART NUMBER
DESCRIPTION PRICE
K940 4.5 Kg In - Line Feeder £167.00
54 OTHER DOSING PRODUCTSLMI CATALOGUE 2019 L
MI
CDP SERIESDesigned to provide a manually controlled method
of dosing chemicals into heating, steam and chilled
water systems.
Features :
Stainless Steel Construction.
Pressure Tested to 21 bar.
Complete with tundish, inlet, outlet
& drain valves.
All Valves are 1" BSP Female.
Maximum Temperature 1200C.
Supplied Fully Assembled for Easy Installation.
Specifications & Pricing
PART NUMBER
CDP-5
CDP-10
CDP-25 25 8 £439.00
SIZE (LITRES)
5
10
CHEMICAL DOSING POTS
PRICE
£247.00
£320.00
£348.0015 10CDP- 15
MAX WORKING PRESSURE
(BAR)14
10
£329.00
CDP-20 20 10 £392.00
CDP-18 1018
55OTHER DOSING PRODUCTSLMI CATALOGUE 2019L
MI
AIR OPERATED DOUBLE DIAPHRAGM PUMPS
Features :Self- Priming, runs dry.
ATEX Approved
Non Electrical
Lubrication Free
Non-Stalling
Available in PP, PVDF, Aluminium & Stainless Steel
Easy to install
Wide selection of sizes & flow rates
MAGNETIC COUPLED SEAL-LESS PUMPS
Features :Chemically Resistant - Polypropylene & PVDF
Seal-less leak-proof design
High Performance - Flow rates up to 1000 L / min
BSP Male inlet / outlet ports
For use only in Flooded Suction Applications
DRUM TRANSFER PUMPSFeatures :
Seal-less design, short run-dry without failure
Heavy duty motor, 825W capable of pumping liquids
up to 1.8 SG
Variable Speed Control up to 100L / min (SG = 1)
Robust Construction
2 tube lengths available
Easy maintenance with screw-on pump foot and bearing housingAvailable in 115V, 230V, (Explosion Proof & Air Operated to Order)
Accessories :
DESCRIPTION
1" ID Clear Braided Hose per metre
Wall Bracket for correct storage of pump
Polypropylene Strainer for dirty/abrasive liquids
Trigger Type Discharge Nozzle
Chemical Transfer Pumps
PART NO. PRICECBPH1
55-0265
55-0282A
52-0017
2.34£
21.00£
81.00£
131.00£
56 CHEMICAL & WATER TRANSFER PUMPSLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICINGAODD PUMPS
MAGNETIC COUPLED SEAL-LESS PUMPS
DRUM TRANSFER PUMP TUBES
DRUM TRANSFER PUMP MOTORSPART NUMBER
ODP-S-240DESCRIPTION
825W Drip-proof motor for Viscosity to 1500cps & SG 1.8
ALTF-1
ALL-1/2
BODY MATERIAL
841.00£
1,073.00£ SSL-1/2
SSL-2
651.00£ SSTF-1 1,596.00£
2,346.00£ 1,665.00£ 1,143.00£
1,383.00£ 1,400.00£ 8.6
964.00£ 2,948.00£
8.68.6
ALL-2SSTF-2
340340340340
ALUMINIUM
460.00£
897.00£ 746.00£ 941.00£
1,601.00£ 1,744.00£ 2,070.00£
1,001.00£
50505050
SANTOPRENETEFLONTEFLONTEFLON
SANTOPRENETEFLON
SANTOPRENE
ALUMINIUMALUMINIUM
STAINLESS STEELSTAINLESS STEEL
DIAPHRAGM
PPTF-1KTF-1
PPL-1 1/2PPTF-1 1/2KTF-1 1/2ALTF-1/2
PRICE
PPTF-1/4KTF-1/4PPL-1/2
1"
299.00£ 394.00£ 447.00£ 527.00£
3,800.00£ 531.00£
340340340 PVDF
SSL-1 1/2ALTF-2
ALL-1 1/2SSTF-1 1/2
SSL-1ALTF-1 1/2
ALL-1
SSTF-1/2
KTF-1/2PPL-1
PPTF-1/2
PART NUMBER
3"3"
2,873.00£ 1,880.00£
3,706.00£ 3,112.00£ STAINLESS STEEL SANTOPRENE
TEFLONSANTOPRENE
2"
145145
POLYPROPYLENEPVDF
POLYPROPYLENEPOLYPROPYLENE
PVDFPOLYPROPYLENEPOLYPROPYLENE
PVDFPOLYPROPYLENEPOLYPROPYLENE
01-7202-0101-7203-01
60 6 POLYPROPYLENE - 90W N/A
ALUMINIUM
26 4.2 POLYPROPYLENE - 18W £155.00 N/A50 6.5 POLYPROPYLENE - 60W £114.00 N/A
371.00£ 120 8 POLYPROPYLENE 1/3 0.25 N/A 448.00£
01-7208-03
01-7204-0301-7205-03
200 12 POLYPROPYLENE 3/4 0.55 N/A 644.00£ 300 20 POLYPROPYLENE 2 1.5 N/A 1,211.00£
01-7206-0301-7207-03
525 22 POLYPROPYLENE 3 2.2 N/A 1,355.00£ 513.00£
200 12 PVDF 3/4 0.55 N/A 771.00£ 0.25 N/A01-7205-03K
01-7206-03K01-7207-03K01-7208-03K
120 8 PVDF 1/3
20 PVDF 2 N/A525 32 PVDF 3 2.2 N/A
1200
MATERIAL
10001200
PART NUMBER LENGTH (mm)
PART NUMBER
KY-8339-1KY-8347-1SS-8339-1SS-8347-1
1000OUTLET HOSE DIAMETER (inches)
CK-8339-1CK-8347-1PP-8339-1PP-8347-1
1111
12001000
1
PRICE345.00£ 348.00£ 303.00£ 310.00£
PRICE 240V 415V
10001200
1,310.00£ 1,542.00£
N/A£124.00
MOTOR HP KW- 10W
300 1.5
1
CPVCCPVC
POLYPROPYLENEPOLYPROPYLENE
PVDFPVDF
STAINLESS STEELSTAINLESS STEEL
ODP-S-115 340.00£
468.00£ 424.00£ 506.00£ 531.00£
PRICE
11
ALUMINIUM
8.68.68.68.6
STAINLESS STEELSTAINLESS STEEL
ALUMINIUMALUMINIUM
STAINLESS STEELSTAINLESS STEEL
ALUMINIUMALUMINIUM
STAINLESS STEEL
TEFLONTEFLON
SANTOPRENETEFLONTEFLON
SANTOPRENETEFLONTEFLON
TEFLONSANTOPRENE
TEFLONSANTOPRENE
TEFLONSANTOPRENE
TEFLONSANTOPRENE
TEFLONSANTOPRENE
TEFLON
SIZE
1/4"1/4"1/2"1/2"1/2"1"1"
11/2"
11/2"
11/2"
1/2"1/2"1/2"1/2"1"1"1"1"
11/2"
11/2"
11/2"
11/2"
2"2"2"
8.68.68.6
FLOW L/min
1515505050
145145
145145
145 8.68.68.68.6
8.6
PRESSURE BAR
55
8.68.68.68.68.6
8.68.68.68.68.68.68.6
PART NUMBER
01-7201-01
55010001000
550550550
BODY MATERIAL
POLYPROPYLENE
MAX FLOW (L/MIN)
MAX HEAD (M)
15.5 2.4
ALTF-3ALL-3
ALUMINIUM
57CHEMICAL & WATER TRANSFER PUMPSLMI CATALOGUE 2019L
MI
LOWARA CENTRIFUGAL PUMPS
Features :Wide range for domestic and industrial applications.Single (CEA) and dual-impeller (CA) models available.Delivery: up to 31 m³/hHead: up to 62 mPower supply: both single and three-phase 50 and 60 HzPower: from 0.37 kW up to 3 kWMaximum operating pressure: 8 barTemperature of pumped liquid: from -10 °C to 110 °CAvailable on request “V” version with FPM seals for temperature up to 110°C and “N” version completely made of AISI 316 stainless steel.
WORLD CENTRIFUGAL PUMPS
Features :from 5 to 50 l/m with head up to 84 metres.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-crystallised and chemically neutral.Liquids from -10°C to +50°C Maximum ambient temperature: +40°CMaximum operating pressure: 10 bar (6 bar for KPS-KPF 30/16).Installation: fixed, horizontal position.Motor protection class: IP 44, Insulation class: FStandard voltage: single-phase 1 x 230 V / 50 Hzthree-phase: 3 x 230-400 V / 50 Hz.
HAND TRANSFER PUMPSFeatures :
Hand operated diaphragm pumps are suitable for a widerange of application, including liquid trasnfer, drum emptying and tank drainage. Suction lift 2.5 metersMaximum discharge of 4m meter head1 stroke/ second approximately 40 liters an hour
Chemical Transfer Pumps
58 CHEMICAL & WATER TRANSFER PUMPSLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICING
LOWARA CENTRIFUGAL PUMPS
WORLD CENTRIFUGAL PUMPS
HAND TRANSFER PUMPS
ACCESSORIES
Pump plus 1m Discharge Leg, 1m suction tube & two jubilee clips
HEAD (m)
FLOW (L/Hr) BODY MATERIAL VOLTAGE
CAST IRON 240
4
4 40
PART NUMBER
CBPH 1 1/4" £4.2211/4" Bore, Clear Braided PVC Hose per metre
HTP-DC £100.00VITON DIAPHRAGM
HTP-DB £33.00
£336.00HTP-BF 40 DUTRAL
£352.00HTP-CF 4 40
£331.00HTP-C
DUTRAL DIAPHRAGM
DESCRIPTION PRICE
VITON
VITON
Pump plus 1m Discharge Leg, 1m suction tube & two jubilee clips
£189.00
DAB-110 84 3000 CAST IRON 110 £350.00
PART NUMBER
£316.00HTP-B 40 DUTRAL
PRICEPART
NUMBERFLOW (L/Hr)
DIAPHRAGM
DAB-240 84 3000
HEAD (m)
4
DESCRIPTION
Pump Only
Pump Only
CEAM-705-415 31 4500 STAINLESS STEEL 415 £409.00
PRICE
CEAM-705-240 31 4500 STAINLESS STEEL 240 £670.00
CEAM-705-110 31 4500 STAINLESS STEEL 110 £339.00
PART NUMBERHEAD
(m)FLOW (L/Hr) BODY MATERIAL VOLTAGE PRICE
59CHEMICAL & WATER TRANSFER PUMPSLMI CATALOGUE 2019L
MI
Chlortronic-2
Features : Applications :Compact Design Potable Water Treatment
Master Control Unit to manage the process Food & Beverage
Wide range of reactor sizes suits most applications Water Hygiene
Optional GRP Enclosure for saftey & security Cooling Towers
Digital Inputs for Flow Proportional Control Building Services
Optional Analyser Upgrade Package with Paper Industry
Optional remote connectivity
Alarm output for connection to on site BMS
Specifications & PricingGenerators
Accessories
POA
CHLORINE DIOXIDE GENERATION
Panel Only Version
PART NUMBER
CHLOR2/LEG
ENCLOSURE
Optional Enclosure
DESCRIPTION
PANEL ONLY
ENCLOSURE
PANEL ONLY
PRICE
£5,273.00
£5,957.00
POA
PART NUMBER
CHLOR2/1
CHLOR2/2
CHLOR2/3
CHLOR2/4
SIZE
UP TO 80 g/hr
UP TO 80 g/hr
UP TO 160 g/hr
UP TO 160 g/hr
SIZE
25 Kg Drum
30 LITRESCHLOR2/BUND
LDS-CLO2
LAN-COM
GSM-MOD
PRICE
£255.00
£265.00
£3,694.00
£195.00
£640.00
DESCRIPTION
SUCTION ASSEMBLIES C/W LEVEL SWITCH
CONTAINMENT BUND FOR ClO2 REAGENTS
CLO2 MONITORING PANEL
REMOTE CONNECTIVITY FOR LDS-CLO2
REMOTE CONNECTIVITY FOR LDS-CLO2
60 CHEMICAL PREPARATION & DILUTION UNITSLMI CATALOGUE 2019 L
MI
POLYMATIC
Designed to auto dilute flocculation
chemicals to the required concentration
immediately prior to injection into the
waste water treatment process
Can be used as a continuous or batch
make down unit
Features :Small, Compact foot-print.
Easy to install.
Easy to maintain.
Multi function control unit.
Inter-locked to water supply so only works when there is sufficient water flow.
Continuous Production or batch processed via level switches.
Standby Mode allows system to remain Idle when solution is not required.
Rental Terms Available.
Weir Overflow Design meets 1999 water regulations on back flow prevention.
Adjustable Water Flow and Polymer pump to vary the concentration produced.
Ancillary Equipment also available such as Polymer Tanks, Storage Tanks, Level Control
devices & Process Dosing Pumps
Specifications & Pricing
Above Costs Exclude Delivery & Installation
Service Contracts Available, Contact Sales Office for Details
£6,103.00
3240 30.3 N/A £7,510.00
PM1380
PM3240
1380 17 £567.00
£5,453.00
600 7.57 £567.00 £5,739.00
PM300
PM600
300 3.79 £562.00
PM120 120 1.58 £562.00 £5,388.00
Liquid Emulsion Polymer Make-Down Systems
PART NUMBERMAX WATER FLOW L/Hr
MAX POLYMER FLOW L/Hr
RENTAL COST PER MONTH
PRICE
61CHEMICAL PREPARATION & DILUTION UNITSLMI CATALOGUE 2019L
MI
POLYPACK M SERIES
Designed to dissolve powder polymer
chemicals to the required concentration
immediately prior to injection into the
waste water treatment process via
Manual Operation of Water Supply
& manual filling of powder funnel.
Features :Available Capacities : 200, 300, 500 & 1000 Litres
140 rpm Agitator
Voltages : 110, 240 & 415V
Outlet Valve
Weld P.E. Pump Mounting Shelf.
Optional low level control.
Graduated MDPE tank in black or natural
Specifications & Pricing
Powder Polymer Make-Down Systems
M1000 £2,004.00
PART NUMBER
M200
M300
M500 £1,942.00
1000
TANK SIZE (LITRES)
200
300
500
PRICE
£1,748.00
£1,830.00
62 CHEMICAL PREPARATION & DILUTION UNITSLMI CATALOGUE 2019 L
MI
POLYPACK CS SERIES
CS 9000 model
Illustrated
Features :Extraction Flow rate up to 12,000 L/hr. Up to 3 mixers depending on model.
2 or 3 Compartment Systems. Supply Hopper with heated
Powder "Wetting" System to prevent "Fish Eyes." Dry Feeder System.
1 draw off nozzle, 3 Drain nozzles Ultrasonic level detection control.
& 1 Overflow nozzle. 304L & 316L stainless steel models
230 V Control Panel. also available.
Extraction Dosing pumps available as optional Auto-Fill Hopper loader available as
extra. optional extra.
Specifications & Pricing
Flow Rates & Powder Rates are based on 60 mins Maturation & Ageing times Respectively
£13,051.00
£14,515.00
Powder Polymer Make-Down Systems
PRICEPART NUMBER
1100
1500
1900
3000
4200
5600
9000
£15,393.00
£23,979.00
POWDER FLOW RANGE Kg/Hr
4.2 - 21.0
5.6 - 28.0
£9,254.00
£9,546.00
£10,132.00
£11,490.00
0.6 - 3.0
1.1 - 5.5
1.5 - 7.5
1.9 - 9.5
3.0 -15.0
Service Contracts Available, Contact Sales Office for Details
CS-5600
CS-9000
Designed to dissolve powder polymer chemicals to the required concentration
immediately prior to injection into the waste water treatment process.
Can be used as a continuous or batch make down unit.
Above Costs Exclude Delivery & Installation
CS-600
CS-1100
CS-1500
CS-1900
CS-3000
CS-4200
9.0 - 45.0
MAX POLYMER SOLUTION FLOW
L/Hr600
63CHEMICAL PREPARATION & DILUTION UNITSLMI CATALOGUE 2019L
MI
Features :
Allows Mixing in the Process Line using baffles
to cause turbulent flow
316 L Stainless Steel or PVC Construction
Male or Female connection options
Plain, BSP or Union Ends Available
Specifications & Pricing
SM1/2PVC £72.00
SM3/4PVC £78.00
1/2"
3/4"
PVC Static Mixer
PVC Static Mixer
170
250
SM2SS £303.00
SM3SS £400.00
2"
3"
Stainless Steel Static Mixer
Stainless Steel Static Mixer
1250
1500
SM1SS £141.00
SM11/2SS £196.00
1"
1 1/2"
Stainless Steel Static Mixer
Stainless Steel Static Mixer
330
1000
STATIC MIXERS
PART NUMBER
PRICE
SM1/2SS £125.00
SIZE DESCRIPTIONLENGTH
(mm)
1/2" Stainless Steel Static Mixer 170
SM1PVC 1" PVC Static Mixer 330 £91.00
SM11/2PVC 1 1/2" PVC Static Mixer 1000 £131.00
SM2PVC 2" PVC Static Mixer 1250 £169.00
64 CHEMICAL PREPARATION & DILUTION UNITSLMI CATALOGUE 2019 L
MI
Sitrans F M Magflo Meters Can measure almost all conductive liquids.
Process Parameters such as Temperature,
viscosity, pressure & density have no
influence on measurement.
Applications:
Water & Waste water
Chemicals
Food & Beverage
Pharmaceuticals
Mining/Aggregates/Cement
Pulp & Paper
Power & Utilities
Features :
MAG 5000 MAG 6000
Analogue Output : 0-20mA or 4-20mA / As for MAG 5000 plus:
Digital Output : Pulse or Frequency Built in Batch Control
Relay Output : 24V dc. Flow alarm/error/empty pipe Improved Accuracy : 0.2%
Digital Input : 30V dc. From totaliser reset or forced output Additional Communications Options
Power Supply : 115-230V IP 67 Housing
Two Totalisers, bi-directional flow, empty pipe detection, error logging Accuracy : 0.4%
Specifications & Pricing
PART NUMBERSIZE
(mm) MAG5000 MAG6000PRICE DESCRIPTION
SENSOR
Siemens Magnetic-Inductive Flowmeters
MAGX-51W-40 40 £1,772.00 £1,945.00 MAG5100W (waste water)MAGX-51W-25 25 £1,762.00 £1,935.00 MAG5100W (waste water)
MAGX-51W-65 65 £1,807.00 £1,980.00 MAG5100W (waste water)MAGX-51W-50 50 £1,798.00 £1,971.00 MAG5100W (waste water)
MAGX-51W-100 100 £1,852.00 £2,025.00 MAG5100W (waste water)MAGX-51W-80 80 £1,816.00 £1,989.00 MAG5100W (waste water)
MAGX-11-6 6 £1,893.00 £2,066.00MAGX-11-2 2 £2,113.00 £2,286.00
MAG1100 (Corrosives)MAG1100 (Corrosives)
MAGX-11-25 25 £1,970.00 £2,142.00MAGX-11-15 15 £1,970.00 £2,142.00MAGX-11-10 10 £1,970.00 £2,142.00
MAGX-11-65 65 £2,465.00 £2,638.00MAGX-11-50 50 £2,366.00 £2,539.00MAGX-11-40 40 £2,167.00 £2,340.00
MAGX-11-100 100 £2,989.00 £3,162.00MAGX-11-80 80 £2,565.00 £2,737.00
MAGX-11F-15 15 £2,129.00 £2,302.00 MAG1100F (Food Sensor)MAGX-11F-10 10 £2,129.00 £2,302.00 MAG1100F (Food Sensor)
MAGX-11F-40 40 £2,373.00 £2,545.00 MAG1100F (Food Sensor)MAGX-11F-25 25 £2,160.00 £2,333.00 MAG1100F (Food Sensor)
MAGX-11F-65 65 £2,676.00 £2,849.00 MAG1100F (Food Sensor)MAGX-11F-50 50 £2,572.00 £2,745.00 MAG1100F (Food Sensor)
MAGX-11F-100 100 £3,350.00 £3,523.00 MAG1100F (Food Sensor)MAGX-11F-80 80 £2,805.00 £2,978.00 MAG1100F (Food Sensor)
MAG1100 (Corrosives)MAG1100 (Corrosives)MAG1100 (Corrosives)
MAG1100 (Corrosives)MAG1100 (Corrosives)MAG1100 (Corrosives)MAG1100 (Corrosives)MAG1100 (Corrosives)
65PROCESS ACCESSORIESLMI CATALOGUE 2019L
MI
DRY DIAL MULTI JETFeatures :
For use with clean water onlyContacting head (pulsed output) when proportional dosing to water flow is required. Used to control LMI dosing pumps (AA9,B7/B9/C7/C9/P5 and Roytronic Excel AD)
Nominal water flows of up to 150 m3/h (6" model)Maximum pressure 16 bar.Cable length 2 metres.Cold Water versions to 30 or 400CHot Water versions upto 90 or 1000CComplete with BSP CouplingsEasily removable reed switch
K Factors : 0.25, 0.5, 1.0, 2.5,
5, 10, 25, 50, 100, 250, 500, 1000
DRY DIAL FLANGE MOUNTFeatures :
Similar to multijet with the additions:-Nominal water flows of up to150 m3/h (6" model)
Maximum pressure 16 bar.Cable length 2 metres.Cold Water versions to 400C
Hot Water versions upto 1100C
Maximum pressure 16 bar.
Easily removable reed switchK Factors : 2.5, 5, 10, 25, 50, 100, 250, 500,1000, 2500, 5000, 10,000.
PART NUMBERS & PRICINGMULTIJET COLD WATER METERS WITH COUPLINGS
FLOW M3/Hr
WATER METERS
SIZE NOMINAL TEMPERATURE
6
10
15
30
30
30
INCH (0C)
GZRFS30 £154.00
GZRFS40 £222.00
11/4
11/2
30
40
GZRFS50 2 50 £311.00
PricePart Number
30
30
30
mm
GZRFS20 £96.00
GZRFS25 £133.001 25 3.5
GZRFS15 £91.001/2 15
3/4 20
1.5
2.5
66 PROCESS ACCESSORIESLMI CATALOGUE 2019 L
MI
PART NUMBERS & PRICINGMULTIJET COLD WATER METERS - TEFLON COATED
FLOW M3/Hr
SINGLE JET HOT WATER METERS
FLOW M3/Hr
FLANGE MOUNT COLD WATER METERS
FLOW M3/Hr
FLANGE MOUNT HOT WATER METERS
FLOW M3/Hr
FLANGE MOUNT COATED HOT WATER METERS
FLOW M3/HrTEMPERATURENOMINAL
(0C)mmINCHPrice
SIZEPart Number
Part NumberSIZE NOMINAL TEMPERATURE
PriceINCH mm (0C)
GMWF100I 4 100 60 40 £587.00
GMWF80I
GMWHD150 6 150 150 110 £1,459.00
GMWHD100 4 100 60 110 £850.00
GMWHD80 3 80 40 110 £801.00
2 50 15 110
GMWHD65 21/2 65 25 110 £711.00
GMWHD50 £635.00
3 80 40 40 £617.00
3
GMWH100
GMWH150 150
£876.00
£1,626.006 150
GMWF150I £1,322.00150 150 406
40 100
4 100 60
£355.001 1/2
11/2 40 10 90
1 25 3.5 90
40 10 30
100
INCH mm (0C)
NOMINAL
£218.00
3/4 20 2.5 30
1 25 3.5 30
GZRFSD40
JSH30KE £227.00
JSH40KE £321.0011/4 30 5 90
100
GMWH65 £682.00
GMWH80 £812.00
65 25 100
GMWH50 £551.002 50 15 100
21/2
80
GMWF65I
GZRFSD15 £206.00
GZRFSD20 £213.00
1/2 15 1.5 30
1 1/4 6 30
65 25 40 £532.00
Part NumberSIZE
Price
GMWF50I 2 50 15 40 £511.00
21/2
TEMPERATURE
Part NumberSIZE NOMINAL TEMPERATURE
PriceINCH mm (0C)
Part NumberSIZE
mm (0C)
NOMINAL TEMPERATUREPrice
INCH
GZRFSD25 £264.00
GZRFSD30 £302.0030
JSH25KE
67PROCESS ACCESSORIESLMI CATALOGUE 2019L
MI
PIC SERIES Metallic Flanged PIC SERIES Plastic Threaded
Features : Designed for use with abrasive & corrosive slurries dry solids & viscous materials
Full bore, no pressure drop or risk of blockage
Total sealing with solids particles, gases, powders & slurries
Leak free due to absence of glands
3 grades of inner sleeve available
Resistant to water hammer process phenomena
PART NUMBERS & PRICING
PVC
£112.00
sleeve material
MILTON ROY PINCH VALVES
Part Number
SizeDN
Part NumberSleevePrice
Control Pressure
Bar
Connection
size
Valve Price
Neoprene
sleeve material
non Toxic Rubber
Operate Pressure
Bar
3060071003F 2 - 6 0980053400NF 3/4" BSP
3060071002F 20 0.05 PVC
4
LitresBody
materialVolume
sleeve material
Natural Rubber
PVC0.05 X20
£147.00
3060071004F 20 0.05 PVC X 4 2 - 6 F 3/4" BSP £148.00
X 4 2 - 6 F 3/4" BSP
£99.00
3060071102F 25 0.07 PVC X 4 2 - 6 F 1" BSP £163.00
4 2 - 6 F 1" BSP3060071103F 25 0.07 PVC X
£164.00
3060071203F 32 0.15 PVC X 4 2 - 6 F 11/4" BSP £146.00
X 4 2 - 6 F 1" BSP3060071104F 25 0.07 PVC
£181.00
3060071204F 32 0.15 PVC X 4 2 - 6 F 11/4" BSP £182.00
X 4 2 - 6 F 11/4" BSP3060071202F 32 0.15 PVC
X 4 2 - 6 F 11/2" BSP3060071304F 40 0.2 PVC
3060071302F 40 0.2 PVC X
3060071303F 0.240 PVC X
97.00£
0980053200N
£190.00
£153.00
4 2 - 6 F 11/2" BSP £189.00
4 2 - 6 F 11/2" BSP
50.00£
127.00£
97.00£
138.00£
368.00£
0980373081N
0980373090N
0980054400N
0980054200N
0980053300N
0980372083N
0980372081N
0980372090N
0980373083N
152.00£
110.00£
149.00£
155.00£
124.00£
152.00£
0980054300N
68 PROCESS ACCESSORIESLMI CATALOGUE 2019 L
MI
CAST IRON
ALUMINIUM
4 2 - 6 316L £145.003060043143F 20 0.2 Cast Iron X
X
£180.00
3060043144F 20 0.2 Cast Iron X 4 2 - 6 316L £181.00
X 4 2 - 6 316L3060043142F 20 0.2 Cast Iron
0.2 Cast Iron
£163.00
3060057122F 40 0.2 Cast Iron X 4 2 - 6 Cast Iron £198.00
4 2 - 6 Cast Iron3060057123F 40 0.2 Cast Iron
3060057144F 40 0.2 Cast Iron
£199.00
3060057143F 40 0.2 Cast Iron X 4 2 - 6 316L £570.00
X 4 2 - 6 Cast Iron3060057124F 40
4 2 - 6 Cast Iron £82.00
X 4 2 - 6 316L
Cast Iron £215.00
X 4 2 - 6 Cast Iron3060058122F 50 1 Cast Iron
3060058124F 50 1 Cast Iron X 4 2 - 6
£624.00
3060058144F 50 1 Cast Iron X 4 2 - 6 316L £661.00
4 2 - 6 316L3060058143F 50 1 Cast Iron X
£194.00
3060059122F 65 1 Cast Iron X 4 2 - 6 Cast Iron £229.00
4 2 - 6 Cast Iron3060059123F 65 1 Cast Iron X
£230.00
3060059143F 65 1 Cast Iron X 4 2 - 6 316L £678.00
X 4 2 - 6 Cast Iron3060059124F 65 1 Cast Iron
£715.00
3060060123F 80 2 Cast Iron X 4 2 - 6 Cast Iron £245.00
X 4 2 - 6 316L3060059144F 65 1 Cast Iron
£280.00
3060060124F 80 2 Cast Iron X 4 2 - 6 Cast Iron £281.00
X 4 2 - 6 Cast Iron3060060122F 80 2 Cast Iron
£857.00
3060060144F 80 2 Cast Iron X 4 2 - 6 316L £893.00
4 2 - 6 316L3060060143F 80 2 Cast Iron X
Number DN Litres material Natural Rubber
Neoprenenon Toxic
RubberBar Bar Material
Price Price
180.00£
Part Size Volume Body sleeve
materialsleeve
materialsleeve
materialOperate Pressure
Control Pressure
ConnectionValve
Part NumberSleeve
0980054400N
0980054200N
£214.00
£607.00
3060058123F 50 1 Cast Iron X
£357.00
3060061122F 100 3.5 Aluminium X 4 2 - 6 Cast Iron £393.00
4 2 - 6 Cast Iron3060061123F 100 3.5 Aluminium X
£394.00
3060061143F 100 3.5 Aluminium X 4 2 - 6 316L £1,252.00
X 4 2 - 6 Cast Iron3060061124F 100 3.5 Aluminium
£1,288.00
3060062123F 125 7 Aluminium X 4 2 - 6 Cast Iron £480.00
X 4 2 - 6 316L3060061144F 100 3.5 Aluminium
£516.00
3060062124F 125 7 Aluminium X 4 2 - 6 Cast Iron £516.00
X 4 2 - 6 Cast Iron3060062122F 125 7 Aluminium
£1,680.00
3060062144F 125 7 Aluminium X 4 2 - 6 316L £1,716.00
4 2 - 6 316L3060062143F 125 7 Aluminium X
£685.00
3060063122F 150 12.5 Aluminium X 4 2 - 6 Cast Iron £721.00
4 2 - 6 Cast Iron3060063123F 150 12.5 Aluminium X
£722.00
3060063143F 150 12.5 Aluminium X 4 2 - 6 316L £2,398.00
X 4 2 - 6 Cast Iron3060063124F 150 12.5 Aluminium
£2,435.00
3060064123F 200 29 Aluminium X 4 2 - 6 Cast Iron £1,145.00
X 4 2 - 6 316L3060063144F 150 12.5 Aluminium
£1,180.00
3060064124F 200 29 Aluminium X 4 2 - 6 Cast Iron £1,181.00
X 4 2 - 6 Cast Iron3060064122F 200 29 Aluminium
£4,007.00
3060064144F 200 29 Aluminium X 4 2 - 6 316L £4,043.00
4 2 - 6 316L3060064143F 200 29 Aluminium X
0980053400N 97.00£
0980053200N
0980053300N
0980055300N
0980055400N
0980055300N
0980055400N
0980055200N
0980054300N
0980054400N
0980054300N
0980055400N
0980055200N
0980056300N
0980056400N
0980056300N
0980057400N
0980057200N
0980055300N
0980055400N
0980055300N
0980056400N
0980056200N
0980060400N
0980060200N
0980058300N
0980058400N
0980058300N
0980059400N
0980059200N
0980057300N
0980057400N
0980057300N
0980058400N
0980058200N
225.00£
148.00£
225.00£
187.00£
283.00£
0980060300N
0980060400N
0980060300N
50.00£
127.00£
124.00£
152.00£
152.00£
124.00£
152.00£
148.00£
225.00£
148.00£
225.00£
148.00£
180.00£
0980059300N
0980059400N
0980059300N
548.00£
575.00£
331.00£
272.00£
331.00£
366.00£
598.00£
241.00£
187.00£
241.00£
272.00£
362.00£
1,261.00£
945.00£
1,261.00£
Part Size Volume Body sleeve
materialsleeve
materialsleeve
materialOperate Pressure
Control Pressure
ConnectionValve
Part NumberSleeve
665.00£
548.00£
665.00£
945.00£
1,111.00£
410.00£
366.00£
410.00£
Price PriceNeoprene
non Toxic Rubber
Bar Bar MaterialNumber DN Litres material Natural
Rubber
69PROCESS ACCESSORIESLMI CATALOGUE 2019L
MI
Required when necessary to take a system water sample which
operates above 600C
Features :
Fixed or Removable Coil.
For System Pressures up to 139 Bar, 3360C
Using a Stainless Steel Coil.
For System Pressures up to 17 Bar, 2050C
Using a Stainless Steel Coil.
Maximum Working Pressure of Shell is 14 bar
Coolant fittings 1/2" BSP
Specifications & Pricing
SAMPLE COOLERS
PART NUMBER
DESCRIPTION PRICE
FS-WSC FIXED STAINLESS STEEL COIL SAMPLE COOLER £558.00
70 PROCESS ACCESSORIESLMI CATALOGUE 2019 L
MI
Assembly Pipework which allows corrosion
testing of other materials with process water.
Coupon test metal strips are held in coupon
holders within the Serpentine for any given
period of time which can be weighed and
photographed, before & after to establish
the type and severity of corrosion.
Features :3 types of Serpentine available :
PVC, Mild Steel & Stainless Steel
2 or 4 Coupon Holder options
1" Brass Gate Valve
1" Hosetail Terminations
Specifications, Accessories & Pricing
£17.00
£27.00
£31.00
£192.00
CH-SS COUPON HOLDER WITH PLUG STAINLESS STEEL
CH-RSSCOUPON HOLDER, STAINLESS STEEL, RETRACTABLE. TOTAL
LENGTH 57.5CM, RECTRACTABLE 49CM
SS-CTC COUPON, STAINLESS STEEL, 3" x 1/2"
MS-CTC COUPON, MILD STEEL, 3" x 1/2"
CP-CTC COUPON, COPPER, 3" x 1/2"
£6.00
£7.00
£7.00
CH-PVC COUPON HOLDER WITH PLUG PVC
CH-MS COUPON HOLDER WITH PLUG MILD STEEL
MS-SERP SERPENTINE MILD STEEL STANDARD 4 PORT
SS-SERP SERPENTINE STAINLESS STEEL STANDARD 4 PORT
£303.00
£479.00
SERPENTINE CORROSION MONITORING
PART NUMBER
DESCRIPTION
PVC-SERP SERPENTINE PVC STANDARD 4 PORT
PRICE
£262.00
PRICE (2 PORT)
£189.00
£226.00
£369.00
71SYSTEMS ACCESSORIESLMI CATALOGUE 2019L
MI
SOLENOID VALVE PURGE VALVE
Features : Features :Solenoid Valve Purge Valve Assembly
110 or 240 V (Please Specify) 110 or 240 V (Please Specify)
Maximum Pressure 10 Bar Complete with Y pattern strainer
Brass Body Brass Body
3 sizes Available 3 sizes Available
Specifications & Pricing
PART NUMBER
DESCRIPTION PRICE
PVA 1 PURGE VALVE ASSEMBLY 1" £321.00
PVA 1/2 PURGE VALVE ASSEMBLY 1/2" £190.00
PVA 3/4 PURGE VALVE ASSEMBLY 3/4" £208.00
SCE-210D95-S SOLENOID VALVE 3/4" £185.00
SCE-210B54-S SOLENOID VALVE 1" £302.00
ELECTRONIC VALVES
PART NUMBER
DESCRIPTION PRICE
SCE-210C94-S SOLENOID VALVE 1/2" £169.00
72 SYSTEMS ACCESSORIESLMI CATALOGUE 2019 L
MI
When installed in the suction pipework
to a dosing pump, they provide an
excellent means of checking the output
and accuracy of the pump without
disturbing the discharge or process
pipework.
Features :
PVC Construction
From 100 ml to 20 L sizes available
Standard BSP connections top & bottom
Specifications & Pricing
1/2" BSP
CALIBRATION CYLINDERS
CONNECTIONS
1/2" BSP
1/2" BSP
1/2" BSP
PART NUMBER
PV2-100B
PV2-250B
PV2-500B
PV2-1000B
SIZE
100 ml
250 ml
500 ml
1000 ml
PRICE
£48.00
£51.00
£56.00
£59.00
PV2-20LTB 20 l 2" BSP £500.00
1" BSP
1" BSP
2" BSP
£105.00
£173.00
£250.00
PV2-2000B
PV2-4000B
PV2-10LTB
2000 ml
4000 ml
10 L
73SYSTEMS ACCESSORIESLMI CATALOGUE 2019L
MI
SINGLE SHOT TIMER
Features :
1.2 seconds to 300 hours
Universal 110 - 240 V
Single depression switches the power to a device for a pre-set amount of time.
Used with a dosing pump can give semi-automatic repeatable dose.
WEATHER PROOF DIGITAL TIME SWITCHES
Features :
IP 55 Rated 16A contacts
single, twin and asymetrical on/off re-cycling versions 30 feely programmable, free day or week block.
240 V (110 V version available) Battery Reserve > 200 hrs
Minimum Switching Time 1 Minute.
Available with fused terminals only or complete with terminals and isolator.
TIMERS
74 SYSTEMS ACCESSORIESLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICING
SINGLE SHOT TIMER
WEATHER PROOF TIME SWITCHES
PLEASE SPECIFY VOLTAGE WITH ORDER
PRICEPART NUMBER DESCRIPTION
1.2 second to 300 hours single shot timer £292.00SDT6
DESCRIPTION
2 Twin Channel Timers with Fused Terminals & Isolator
1 Single & 1 Twin Channel Timer with Fused Terminals & Isolator
PRICEPART NUMBER
£216.00Twin Channel Timer with Fused Terminals and IsolatorSC28 21-ISO
£135.00
SC28 31-ENC
Twin Channel Timer with Fused Terminals
Single Channel Timer with Fused TerminalsSC28 11-ENC
£338.00
£326.00
£197.00ODI3-ISO Asymetrical on/off Re-Cycling Timer with Fuesd Terminals & Isolator
£331.00
£167.00
£180.00
1 Single & 1 Twin Channel Timer with Fused Terminals
SC28 21-ENC
Single Channel Timer with Fused Terminals and IsolatorSC28 11-ISO
SC28 31-ISO
SC28 41-ISO
75SYSTEMS ACCESSORIESLMI CATALOGUE 2019L
MI
Roto MouldedDT Range Features :
50 - 1000L Working Capacity
UV Stabilised MDPE
Max Sg 1.30 for contents
Screw Top Lids for Safety
Split Level top design for strength, provides ancillary
mounting surface
Available in Natural or Black
BD Range Features :55 - 1100L Working Capacity
UV Stabilised MDPE
Max Sg 1.30 for contents
ST Range Features :1500 - 2000L Working Capacity
UV Stabilised MDPE
Max Sg 1.30 for contents
Manhole size top access
Flat Surface, provides mounting for ancillary equipment
Available in Black
ALL TANKS & BUNDS ARE SIBJECT TO SPECIAL DELIVERY COSTS
DUE TO SIZE.
PLEASE CONTACT SALES OFFICE FOR DETAILS
SPECIFICATION & PRICING
TN3M2 BLACK TANK 3000 1535 X 1913 £1,148.00TN5M0 BLACK TANK 5000 1950 X 2000 £1,523.00
£206.00
Chemical Dosing Tanks & Bunds
BD300BD500
£111.00£136.00
DESCRIPTIONNATURAL BUNDNATURAL BUNDNATURAL BUND
1200 X 1694ST1500ST2000
BLACK TANK£1,076.00
Tank Lid 1
BLACK TANK1500
1625 X 1430
£74.00£38.00
DT100BNATURAL TANK
NATURAL TANK
BD1000
NATURAL BUNDNATURAL BUNDNATURAL BUND
DIMENSIONS (dia x h) mm
805 X 325
330550
940 X 620
CAPACITY (LITRES)55
PART NUMBERBD50 680 X 285
£406.00
PRICE£91.00
1100 1825 X 560
£173.001130 X 680
DT1000B 1065 X 1355
BD200 970 X 395220
Tank Lid 2 Spare Screw Top Tank Lid 500-1000
BD100 110
BLACK TANK
Spare Screw Top Tank Lid 50 - 300
£806.002000
NATURAL TANK
DT200BDT200
DT300
DT500
DT1000
NATURAL TANK
NATURAL TANKDT300B
DT500B
BLACK TANK
BLACK TANK
£248.00
£361.00
£423.00
100
200
300
500
1000
495 X 700
635 X 785
660 X 1075
815 X 1100
200
300
500
1000
£329.00
£385.00
635 X 785
660 X 1075
815 X 1100
1065 X 1355
£136.00
£226.00
£124.00
£143.00
PART NUMBER DESCRIPTION CAPACITY (LITRES) DIMENSIONS (dia x h) mm PRICEDT50
DT100 100 495 X 700 £113.00
NATURAL TANK 50 425 X 500 £85.0050 425 X 500 £93.00BLACK TANK
BLACK TANK
BLACK TANK
DT50B
76 CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019 L
MI
Tank Mounting Frames Tank Outlet ValvesFeatures : Features :
Includes Pump Shelf Fitting Included
Allows Flooded Suction Allows flooded suction to
Supports and Elevates pumps
Storage Tank Various sizes available
Painted Mild Steel or PVC Construction
Polypropylene Options Option for use with LMI
Foot valve
Tank Sight Glasses Features :To suit tanks from 50L to 3000L
Tank Outlet Valve Included
Enables visual check of chemical level
in opaque storage tanks
Assembly Charge :
Tank, Sight Glass & outlet valve @ £45.00
SPECIFICATION & PRICINGTANK MOUNTING FRAMES
TANK OUTLET VALVES SIGHT GLASSES
£60.00
£90.004500 L TANK FRAME TMP2
£186.00
£226.00
£97.00 ASSY CHG1" OUTLET VALVE
11/2" OUTLET VALVE
2" OUTLET VALVE
TFR4500
DESCRIPTION
MILD STEEL
50 L TANK FRAME
100 L TANK FRAME
200 L TANK FRAME
300 L TANK FRAME
500 L TANK FRAME
1000 L TANK FRAME
1500 L TANK FRAME
2000 L TANK FRAME
PART NUMBER
DESCRIPTION
£151.00
£165.00
£173.00
£148.00
£221.00
£756.00
PRICE PRICEPART
NUMBERBUND PART No.
IF REQUIRED
PRICE
Tank Accessories
Please Contact Sales
£756.00
£1,458.00
£161.00
£161.00
£145.00
£145.00
BUND PART No. IF REQUIRED
TFR50
TFR100
TFR200
TFR300
TFR500
TFR1000
TFR1500
BD100
BD200
BD500
BD500
PART NUMBER
TFR50-PP
TFR100-PP
TFR200-PP
PRICEPART
NUMBERDESCRIPTION
(Fitted complete with EPDM Seals)
MDPE
DESCRIPTION
POLYPROPYLENE
50 L TANK FRAME
100 L TANK FRAME
200 L TANK FRAME
300 L TANK FRAME
50-200L MOUNTING PLATE
TFR300-PP
TMP1
BD100
BD200
BD500
BD500
BD1000
BD1000
Please Contact Sales
PART NUMBER
DESCRIPTION MATERIAL
£129.00
TFR2000Please Contact
Sales
MDPE300-1000L MOUNTING
PLATE
PRICE
Tank, sight glass & outlet valve £45.00
£68.00 SG1 Sight Glass for 50 - 200L tanks £130.00OV1/2
OV1
OV11/2
OV2
1/2" OUTLET VALVE
77CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019L
MI
Agitators High Speed Motor
Features :
1400 rpm
From 50L - 1000L tank sizes
Plastic coated shafts up to 200L
optional above 200L
Agitators Slow Speed Geared Motor
Features :Slow speed 140 rpm geared
motor
From 50L - 1000L tank sizes
Plastic coated shafts
available
Agitators Hand OperatedFeatures :
Economical agitationEasy to operate
PVC Construction
50 - 500L tank models available
Tank Accessories
78 CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICING
AGITATORS HIGH SPEED
AGITATORS SLOW SPEED
AGITATORS - HAND OPERATED
AGITATORS - ACCESSORIES HIGH SPEED
CAPACITY (LITRES)
50
100
200
300
500
PRICE
£55.00
£57.00
£57.00
£61.00
£70.00
PVC-SC
AGIKIT
REPSHA-1
REPSHA-2
REPSHA-3
PRICE
£120.00
£52.00
£217.00
£186.00
£217.00
CAPACITY (LITRES)
upto 200
300 - 1000
upto 200
DESCRIPTION
PVC Coating for Shaft
Tank Fitting Kit
Replacement Shaft 90W
Replacement Shaft 0.37kW
Replacement Shaft 0.25kW
PART NUMBER
HA200
HA300
HA500
DESCRIPTION
PVC AGITATOR
PVC AGITATOR
PVC AGITATOR
PVC AGITATOR
PVC AGITATOR
PART NUMBER
HA50
HA100
300 ; 500 ; 1000
300 ; 500 ; 1000
300 ; 500 ; 1000
upto 1000
PRICE
£536.00
£421.00
£487.00
£647.00
£503.00
£578.00
£120.00
£301.00
£259.00
CAPACITY (LITRES)
50 ; 100 ; 200
50 ; 100 ; 200
50 ; 100 ; 200
300 ; 500 ; 1000
300 ; 500 ; 1000
300 ; 500 ; 1000
PRICE
£352.00
£321.00
£281.00
£321.00
DESCRIPTION
110 V ; 0.25kW
240 V ; 0.25kW
415 V ; 0.25kW
110 V ; 0.375kW
SSA-4153
SSA-1107
SSA-2407
SSA-4157
PVC-SC-SSM
PART NUMBER
SSA-1103
SSA-2403
DESCRIPTION
110 v 1 phase 0.37 kW
240 v 1 phase 0.37 kW
415 v 3 phase 0.37 kW
110 v 1 phase 0.75 kW
240 v 1 phase 0.75 kW
415 v 3 phase 0.75 kW
PVC Coating for Shaft
CAPACITY (LITRES)
50 ; 100 ; 200
50 ; 100 ; 200
50 ; 100 ; 200
25292
27591
240 V ; 0.375kW
415 V ; 0.375kW
PART NUMBER
15290
15292
17591
25290
AGIMOUNT Mounting of Agitator includes AGIKIT upto 1000L £83.00
TPM2 Tank Re-inforcing Plate upto 1000L £90.00
79CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019L
MI
Level Switches/Probes/Controllers
Features :
Illustrated left for use with LMI pump range, AA7, AA9,
B7, C7, P5 & AD9 series
Can simply switch off a pump when low level reached or
close valve on high level
LMI Switch
Designed to be part of the automation of a system
Float Type Switches available.
Float Switch
Can be connected to a terminal box for use with
DCS/plc etc.
Conductive Level Probes & Controllers available for
automation of refilling
Controller
Tank Accessories
80 CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019 L
MI
LOW LEVEL SWITCH
LEVEL CONTROLLERS
LOW LEVEL ASSEMBLIES - RIGID SUCTION
LEVEL PROBES
LEVEL SWITCHES
PRICE
£113.00
DESCRIPTION
Stainless Steel Level Probe & Holder
PART NUMBER
LPH-3
£57.00
£100.00
Switch & Cable
Switch, terminal box & Lance
FLS-C
FLS-T
PART NUMBER
RS200
RS500
RS1000
WTB
RS-AD EXCEL
61FGP-ENC £261.00
PRICEDESCRIPTIONPART NUMBER
Enclosure, pre-wired terminals
PRICE
£86.00
£88.00
£90.00
£38.00
£149.00
DESCRIPTION
Low Level Assy upto 200L
Low Level Assy upto 500L
Low Level Assy upto 1000L
Weatherproof Terminal Box
Low Level Assy for AD Excel
PART NUMBER
29190E
WTB
48413
DESCRIPTION
Level Switch
Weatherproof Terminal Box
Level Switch for AD Series
PRICE
£92.00
£38.00
£285.00
PART NUMBER DESCRIPTION PRICE
Level Controller in Proof
81CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019L
MI
Spill PalletsFeatures :
Polyethylene Construction
Suitable for Most 1000L IBC's
Holds 110% capacity of the IBC
Complete with Flooring
Single & Double IBC capacity available
Heater JacketFeatures :
Teflon / Polyester Construction
Designed heat the contents stored in 1000L
Intermediate Bulk Containers
Dual Power Circuits
Thermally Insulated with Optional Thermal LidFrom 0 - 40 or 0 - 900C Thermostat
110 or 240V options
IP 40 Protection
SnaplocksFeatures :
Polypropylene Construction
Suitable for Most Tanks & IBC's
From 3/4" to 2" available
Both Male and Female parts stocked
Couplers and Dust Plug/Caps available
IBC ACCESSORIES
82 CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019 L
MI
SPECIFICATION & PRICING
SPILL PALLETS HEATER JACKET
SNAPLOCKS PART A- Female BSP Threaded Adaptor SNAPLOCKS PART B- Male BSP Threaded Coupler
SNAPLOCKS PART D- Female BSP Threaded Coupler SNAPLOCKS PART F- Male BSP Threaded Adaptor
DUST PLUG DUST CAP
SCHUTZ IBC ADAPTOR
DESCRIPTION
(1") 633A-1 & 633F-1
(11/2") 633A-11/2
& 633F-11/2
(2") 633A-2 & 633F-2
PART NUMBER
633F-2
PART NUMBER PRICE
634B-1 £10.41
634B-1 1/2
PART NUMBER DESCRIPTION
634A-1 1/211/2" For
633D-1 1/2 & 633B-1 £7.23 £12.31
634A-11" For
633D-1 & 633B-1£6.27
PRICE PRICE
2 1/2" Female Snaplock/Female BSP
£16.81
SHUIBC £20.00
SHUKIT £128.00
634A-22" For
633D-2 & 633B-2£10.53
DESCRIPTION
To Convert 2" nominal bore Schutz IBC Outlet to 2" BSP Female thread
Schutz Outlet Assembly with Isolation Valve, 3/4" Snaplock & 5 m Hose
634B-2 £13.73
3/4" Male Snaplock / Male BSP
1" Male Snaplock / Male BSP
PRICE
1 1/2" Male Snaplock / Female BSP
PRICE
HIBC-(xxxV) £1,610.00
£5.03
1" Male Snaplock / Female BSP
£18.08
DESCRIPTION
IBC Heater Jacket
Thermal Lid
DESCRIPTION
3/4" Female Snaplock / Male BSP
1" Female Snaplock / Male BSP
1 1/2" Female Snaplock / Male BSP
2 1/2" Female Snaplock / Male BSP
DESCRIPTION
633D-2
£6.38
£6.48
633D-1 1/2 1 1/2" Female Snaplock/Female BSP
£15.93 633F-1 1/2 1 1/2" Male Snaplock/Male BSP
2 1/2" Male Snaplock/Male BSP
PART NUMBER PRICE
2576 x 1366 x 460 HIBC-L
£6.16
PART NUMBER
633F-3/4
633A-2 £9.08 633B-2
1" Female Snaplock / Female BSP
£11.58
PART NUMBER PRICE
633D-3/43/4" Female
Snaplock/Female BSP£9.62
633D-1
2 1/2" Male Snaplock / Female BSP
DESCRIPTION
633F-1
PRICE
£4.83
DESCRIPTION
PIBC
PIBC-2
1760 x 1350 x 710 £701.00
£827.00
633B-1 1/2 £15.69
PART NUMBER DIMENSIONS PRICE
633B-3/4 £11.38
633B-1 £14.33
PART NUMBER
633A-1 £6.27
633A-1 1/2 £7.23
633A-3/43/4" Male Snaplock /
Female BSP
£210.00
PART NUMBER
83CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019L
MI
LOW PROFILE SPILL FLOORING
2 DRUM CAPACITYCapacity : 150 L
PSF2 Length : 1260 mm
Width : 860 mm
Height : 150 mm
Load : 1000 Kg
Evenly Distributed
4 DRUM CAPACITY IN-LINECapacity : 300 L
PSF4S Length : 2610 mm
Width : 860 mm
Height : 150 mm
Load : 1000 Kg
Evenly Distributed
4 DRUM CAPACITY
PSF4 Capacity : 300 L
Length : 1660 mm
Width : 1260 mm
Height : 150 mm
Load : 1000 Kg
Evenly Distributed
SPILL SAFE FLOOR RAMPLength : 650 mm
POLYRAMP Width : 800 mm
Height : 165 mm
SPILL CONTAINMENT PRODUCTS
84 CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019 L
MI
BUNDED PALLETS1 DRUM CAPACITY
Capacity : 225 L
PP1 Length : 900 mmWidth : 700 mmHeight : 525 mm
2 DRUM CAPACITYCapacity : 240 L
PP2 Length : 1220 mmWidth : 820 mmHeight : 330 mm
4 DRUM CAPACITY Capacity : 230 L
PP4L Length : 1280 mm
Width : 1280 mm
Height : 275 mm
SPILL KITS
GRAB BAG KITS WHEELED SPILL KITSTS01 & TSC1 SKC6 & SKC7
Easy Carry for rapid Two Sizes Available
response Includes: Capacity : 84L 218L
Kits of absorbents Absorbent Pads & Socks Length : 420 mm 580 mm
compatible with chemical plugging compound Width : 460 mm 650 mm
or fuel/oil based liquids cushions & Bags Height : 920 mm 1040 mm
goggles & gloves
SKC6 SKC7
85CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019L
MI
SPECIFICATION & PRICING
LOW PROFILE SPILL FLOORING
BUNDED PALLETS
GRAB BAG KITS
WHEELED SPILL KITS
WHEELED SPILL KIT REFILLS
Pads : 40 cm x 50 cm Cushions : 40 cm x 40 cmSmall Socks : 7.5 cm x 3 m Plugging Compound : 500 gLarge Socks : 7.5 cm x 1.2 m
SKC6R50 PADS, 4 SOCKS (SMALL), 1 SOCK (LARGE) 4 CUSHIONS, 1 TUB PLUGGING
COMPOUND, 3 BAGS, 1 PAIR GOGGLES & 1 PAIR GLOVES£132.00
SKC7R200 PADS, 8 SOCKS (SMALL), 3 SOCKS (LARGE) 5 CUSHIONS, 1 TUB PLUGGING
COMPOUND, 10 BAGS, 1 PAIR GOGGLES & 1 PAIR GLOVES£274.00
PART NUMBER DESCRIPTION PRICE
SKC6 WHEELED BIN CHEMICAL SPILL KIT, ABORBS 84L OF LIQUID £138.00
SKC7 WHEELED BIN CHEMICAL SPILL KIT, ABORBS 218L OF LIQUID £226.00
PART NUMBER DESCRIPTION PRICE
TS01 GRAB BAG SPILL KIT FOR OIL BASED LIQUIDS £66.00
TSC1 GRAB BAG SPILL KIT FOR LIQUID CHEMICALS £67.00
PART NUMBER DESCRIPTION PRICE
PP2 4 DRUM SPILL FLOOR MDPE CONSTRUCTION £187.00
PP4L 4 DRUM IN-LINE SPILL FLOOR MDPE CONSTRUCTION £244.00
PART NUMBER DESCRIPTION PRICE
PP1 2 DRUM SPILL FLOOR MDPE CONSTRUCTION £202.00
£272.00
£453.00
£99.00
2 DRUM SPILL FLOOR MDPE CONSTRUCTION £210.00
PSF4
PSF4S
POLYRAMP
4 DRUM SPILL FLOOR MDPE CONSTRUCTION
4 DRUM IN-LINE SPILL FLOOR MDPE CONSTRUCTION
SPILL FLOOR RAMP MDPE CONSTRUCTION
DESCRIPTIONPART NUMBER PRICE
PSF2
86 CHEMICAL STORAGE, HANDLING & ACCESSORIESLMI CATALOGUE 2019 L
MI
INSTALLATIONS - PILOT PLANTS, TEST RIGS & DOSING SKIDS
Features :Rugged con-joined frames provide support & Storage.
Equipment ergonomically positioned for safe operation and maintenance
IBC Frame designed for optimum flow characteristic through the equipment.
Design allows for flooded suction to re-circulation pump, avoiding priming & cavitation issues.
Allows efficient & safe equipment operation & switch over.
Built & installed to client's specification.
SYSTEMS ENGINEERING
87SYSTEM BUILDSLMI CATALOGUE 2019L
MI
WALL MOUNTED BACKBOARD SYSTEMS
Furnished with simple sample manifolds or, more complex Cooling Tower Control
Equipment like the one illustrated above.
Features :
Plug & Play Designs make it easier to install on site.
Leading to Reduced Installation/Commissioning Time
Resulting in Reduced Client Costs.
Choice of Materials to suit your Application
Ergonomically Constructed to Allow Easy Maintenance
Sizes & Dimensions to suit site requirements.
Extensive Choice of Dosage and Monitoring Equipment Available
SYSTEMS ENGINEERING
88 SYSTEM BUILDS LMI CATALOGUE 2019 L
MI
FRAME MOUNTED BACKBOARD SYSTEMS
Features :Ideal where a flat vertical surface is not available.
Plug & Play Design allows efficient Installation & Commissioning
Bespoke Frame Stand designs to suit site requirements
Ergonomic positioning of euipment at the correct height for your operators
Weather Proof Canopies available for outdoor installations
Localised electrical connections, isolators and process valve isolation to aid maintenance
SYSTEMS ENGINEERING
89SYSTEM BUILDSLMI CATALOGUE 2019L
MI
FREE STANDING L - SHAPED FRAME WITH ENCLOSURE SYSTEMS
Features :Provides Secure, Lockable environment for dosage equipment.
Positioned ergonomically for operator comfort
Complete with suction manifold to suit the application.
System illustration shows the use of a calibration cylinder fitted with level switch
Localised electrical connections, isolators and process valve isolation to aid maintenance
SYSTEMS ENGINEERING
90 SYSTEM BUILDS LMI CATALOGUE 2019 L
MI
SELF CONTAINED L - SHAPED FRAME SYSTEMS
Features :Rugged L- Shape design for strength and durability.
Equipment ergonomically positioned for safe operation and maintenance
IBC Bund Mounted for complete chemical containment.
Design allows for flooded suction to dosing pumps, avoiding priming issues.
Allows efficient & safe chemical switch over.
Allows simple use of calibration cylinders to aid commissioning & process verification
SYSTEMS ENGINEERING
91SYSTEM BUILDSLMI CATALOGUE 2019L
MI
AUTO CHEMICAL DILUTION & DISTRIBUTION SYSTEMS
Features :
Plug & Play Designs make it easier to install on site.
Integrated Operator Control Panel
Compact Design to fit site footprint
Choice of Materials to suit your Application
Sizes & Dimensions to suit site requirements.
Local Isolation of electrical connections and process valves
Audible/Visual Alarm warning signals available to suit.
SYSTEMS ENGINEERING
92 SYSTEM BUILDS LMI CATALOGUE 2019 L
MI
FRAME MOUNTED BATCHED PROCESS SYSTEM
Features :Fabricated Process Solution Storage Tank, sized to fit in building.
Moulded Treatment Tank sized to process a given sized batch in a required time period.
Transfer and re-circulation pumps to provide mixing and to move batches of process liquid.
Backboard with sample manifold and chemical injection point.
Process monitor treats process batch and empties Treatment tank when batch complete
Designed from scratch to meet clients' requirements.
SYSTEMS ENGINEERING
93SYSTEM BUILDSLMI CATALOGUE 2019L
MI
GENERAL.Unless otherwise agreed in writing these conditions of sale shall be deemed to be incorporated in to the contract of sale entered into by
LIQUID METERING INSTRUMENTS LTD (Hereinafter called “The Company”). The customers terms & conditions shall only be incorporated into the
contract if :
i) They are not inconsistent with “The Company’s” conditions of sale, and ii ) They have been accepted by “The Company” in writing.
ACCOUNTS AND PAYMENT.1) Accounts shall be opened at the discretion of “The Company”
2) The customer shall pay for the goods by the last day of the month following that in which the goods were supplied. Payment by this date
shall be nett monthly account, unless otherwise agreed in writing by the parties.
3) A maximum amount of credit allowable shall be set upon each account & “The Company” reserves the right to withdraw credit facilities upon
accounts exceeding the said limit.
4) “The Company” reserves the right to withdraw credit facilities on all overdue accounts.
5) All goods or materials supplied by “The Company” are to remain the property of “The Company” until payment is received in full for said goods.
All such goods and materials are at the sole risk of the customer and in the event of the same being damaged, destroyed or lost after delivery,
“The Company” is entitled to receive payment for the said goods in full.
PRICES AND CONDITIONS.1) Typing and clerical errors are subjected to correction.
2) All prices quoted shall be subjected to “Price ruling at date of supply” unless otherwise stated in writing.
3) A minimum order value of £15.00, excluding VAT is required on all orders accepted by the “The Company”
4) Any revision in price quoted shall be effective without prior notice to the customer.
5) “The Company” reserves the right to charge the customer for any additional costs incurred in obtaining or supplying goods or materials where
these occur either as a direct result of the customers instructions, or where they could not reasonably have been foreseen at the time the
quotation was given.
ORDERS AND DELIVERY.1) “The Company” reserves the right to charge the customer with all costs incurred on cancelled orders.
2) The time and date of delivery shall not be of the essence, unless otherwise agreed in writing by the parties.
3) In the absence of written information to the contrary the customers directions will be the sole basis for manufacture.
4) “The Company” shall not be liable for any loss or damage of any kind attributable to any delay in the performance of the contract on behalf of
“The Company” for whatever reason. The customer will keep “The Company” indemnified against any action, claim or demand arising from such
loss or damage.
5) The customers of “The Company” are experts in their own specialized fields and utilize the goods for a multitude of applications specific to their
business. To the best of “The Companys” knowledge the workability, reliability and accuracy of the goods is of the highest quality, but all goods
are supplied on the understanding that the customers will use their own specialised skill and judgement in assessing the fitness of the goods for
the intended use, results and level of performance which will be obtained therefrom.
6) “The Company” shall be under no liability to the customer in respect of any loss or defects in goods supplied, nor shall it be responsible for any
personal injury, damage or loss of any kind attributable to defects in such goods. The customer will keep “The Company” indemnified against any
such claim or demand arising from any such injury, damage or loss.
7) When delivery takes place at the customers premises, “The Company” or carrier, as the case may be, shall not be under any obligation to
provide any plant, power or labour, which in addition to “The Companys” or carriers personnel is required for loading or unloading.
Any assistance given beyond the usual place of delivery or collection shall be at the sole risk and expense of the customer, who will keep
“The Company” or carrier indemnified against any action, claim or demand which could not have been made if such assistance had not been given.
RETURNS. If rejecting any goods the customer shall specify the reason why and return the rejected goods within thirty days of the original invoice date, at
the expense of the customer unless, it has been agreed in writing between the parties that the necessary replacement or repair shall be carried
out by “The Company” at the customers premises.
Goods supplied cannot be returned for credit without written agreement by “The Company”
A minimum handling charge of 15% will be made on the value of the goods returned. Specially manufactured goods will not be accepted for credit.
SHORTAGE AND DAMAGE.1) The customer shall within fourteen days of the original invoice notify “The Company” in writing of any shortage or damage to the
goods supplied.
2) The customer shall ensure that a duly authorized person is in attendance to receive goods being delivered, and that a signature is obtained
to confirm receipt of goods.
3) It shall be deemed that where a customer fails to comply with 1 & 2 above, that all goods have been received in the correct amount and
in good condition.
WARRANTY. If any goods are reported faulty whilst covered under warranty the goods must be returned to “The Company” for inspection / validation
and repair.
The Contract shall be governed in all respects by English Law and can be subject to the jurisdiction of the English Courts.
CONDITIONS OF SALE
LMI94