Contactors, auxiliaries, accessories and spare parts · 1 Contactors, auxiliaries, accessories and spare parts 1 - 1 CONTACTOR COMMUNICATION AUXILIARY ... AC contactors 4 pole open

1 Contactors, auxiliaries, accessories and spare parts

1 - 1

CONTACTOR COMMUNICATION

AUXILIARY

Contactor ratings chart 1 - 2Introduction to CA 8 2.2 - 5.5 kW compact contactor system 1 - 4Introduction to CA 7 4 - 55 kW contactor system 1 - 5Introduction to CA 6 55 - 500 kW contactor system 1 - 7Introduction to CA 5 257 - 710 kW contactor system 1 - 8Introduction to 1000 volt contactors 1 - 9Product selectionAC contactors 3 pole open type CA 8, CA 7, CA 6, CA 5 1 - 10AC contactors 3 pole open type GH - Ghisalba 1 - 11DC operated AC contactors 3 pole open type CA 8, CA 7, CA 6, CA 5 1 - 12DC operated AC contactors 3 pole open type low profile electronic coil features 1 - 13AC contactors 4 pole open type CA 8, CA 7 1 - 14AC contactors 4 pole open type GH15 - Ghisalba 1 - 16 Safety contactors CAS - AC and DC operated 4 - 500 kW 1 - 18Capacitor contactors CAQ 7 and GH15 type 12.5 - 50 kVar 1 - 20

AC contactors GH15 3 & 4 pole magnetically latched 1 - 21

DC switching contactors 1 - 21

Auxiliaries and accessories 1 - 22Spare parts 1 - 32 Contactor communication auxiliary - type CCA 1 - 36

Mounting rail - to suit DIN style equipment 1 - 37

ACCESSORIES

CA 7 CONTACTORS AC CONTACTORS

CA8-5 CA 8-9[C ]CA 8-12] CA 7-9 CCA 7-12 CCA 7-16 CA 7-23 CA 7-30 CA 7-37 CCA 7-43 CCA 7-60 CA 7-72 CA 7-85

CURRENT RATINGS

40 °C Ith AC 1 - 415 V

Amps

20 20 32 32 32 32 65 65 85 100 100 100

60 °C AC 1 - 415 V 16 16 32 32 32 32 65 65 80 100 100 100

AC 2, AC 3 - 415 V 5 8.5 (11.5) 9 12 16 23 30 37 43 60 72 85

AC 4 1) - 415 V 2 3.6 4.3 6.6 9 9 12 14 16.5 25.5 31 38

AC 2, AC 3 - 690 V 2.8 4.9 (6.7) 5 7 9 12 18 21 25 34 42 49

AC 2, AC 3 - 1000 V - - - - - - - - - - - -

MOTOR STARTER RATINGS AT OPERATIONAL VOLTAGE 400/415 V. ALL kW RATINGS APPROXIMATE

60 °C AC 2, AC 3 - 415 V

kW

2.2 4 (5.5) 4 5.5 7.5 11 15 20 22 32 40 45

AC 4 1) - 415 V 2.2 1.5 1.8 3 4 4 5.5 6.3 7.5 13 17 20

AC 2, AC 3 - 690 V 2.2 4 (5.5) 4 5.5 7.5 10 15 18.5 22 32 40 45

AC 2, AC 3 - 1000 V – – – – – – – – – – – –

Star-delta 2) 3) Line/delta 4 7.5 (11) 7.5 11 15 22 25 37 40 55 63 80

Star point Y - - 14 19 25 37 50 60 72 100 125 145

Star point ∆ - - 18.5 25 34 50 63 85 95 135 150 190

CAPACITOR AND LAMP SWITCHING AT OPERATIONAL VOLTAGE 415 V

Capacitor switching 40 °Ckvar

- - 8 8 10 12.5 20 25 35 50 50 50

AC 6b 4) 60 °C - - 8 8 10 12.5 20 22 30 42 50 50

Incandescent lamps AC 5bAmps

5 9 12 16 18 22 30 37 43 60 70 76

Fluorescent lamps AC 5a 18 18 22.5 25 28 29 40.5 45 77 81 85 90

MECHANICAL, ELECTRICAL AND COIL DATA

Mechanical life mill/Ops

15 15 13 13 13 13 13 13 12 6 6 6

Electrical life at AC 3 415 V 0.7 0.7 1.3 1.3 1.3 1.3 1.3 1.3 1 1 1 1

Max operating rate (@ max Amps) Ops/Hr 250 250 700 700 700 600 600 600 600 500 500 500

Switching delay Pick-upms

15-40 15-40 15-30 15-30 15-30 15-30 15-30 15-30 15-30 20-40 20-40 20-40AC Coil Drop-out 15-33 15-33 10-60 10-60 10-60 10-60 10-60 10-60 10-60 10-60 10-60 10-60

AC Coil consumption Pick-up VA 35 35 70 70 70 70 80 80 130 200 200 200

W 32 32 50 50 50 50 60 60 90 110 110 110

Hold-in VA 5 5 8 8 8 9 9 9 10 16 16 16

W 1.8 1.8 2.6 2.6 2.6 3 3 3 3.2 4.5 4.5 4.5

DC Coil consumption Pick-upW

3 3 6.5 6.5 6.5 9.2 9.2 9.2 10.1 200 200 200 Hold 3 3 6.5 6.5 6.5 9.2 9.2 9.2 10.1 4.5 4.5 4.5

Auxiliary contacts available Std/Max// 1/4 1/4 1/9 1/9 1/9 1/9 -/8 -/8 -/8 -/8 -/8 -/8

Integral auxiliary contact AC 12, 60 °C

Amps

6 6 20 20 20 20 - - - - - -

AC 15, 415 V 1.8 1.8 6 6 6 6 - - - - - -

Add-on auxiliary block AC 12, 60 °C 6 6 6 6 6 6 6 6 6 6 6 6

AC 15, 415 V 1.2 1.2 3 3 3 3 3 3 3 3 3 3

Electronic overloadCEP 7-EE and adjustment rangeDirect mounting application 5)

AmpsCEP 7-EECBP 7 EECB 1.0...5 A1 0 5 CEP 7-EEED7 EEED 5.4...27 A5 4 27 CEP 7-EEGE 18...90 A

CEP 7-EEDB 3.2...16 A CEP 7-EEFD 9...45 A CEP 7-EEVE 60...120 A

THERMAL OVERLOAD SELECTION 5) 6)

CEPEP 7-7-EEEEEEBB 5.5 44...27.27 A

THERMAL RLOAD SELECTION 5) 6)

CEP 7 EEVE 60...120 A

Thermal overload 5) 6) and advanced electronicrange Ammps

CT 8 A/B/C...CT 8 A/B/C CT 7N-23-A/B/C...7N 23 A/B/C CT 7N-37-CCT 7N 37 C CT 7N-85-CCT 7N 85 CCT 7N-43-C

Ratings To: AS/NZS 60947.4 IEC 60947.4CONTACTOR

Utilisation categories Main PolesAC 1: Non-inductive or slightly inductive loads; resistance furnacesAC 2: Slip-ring motors: Starting, pluggingAC 3: Squirrel-cage motors: Starting, switching off motors during runningAC 4: Squirrel-cage motors: Starting, plugging, inchingAuxiliary Contacts AC 12: Control of resistive loads and solid state loads with isolation by optocouplersAC 15: Control of electromagnetic loads; contactor coils

Please scan the QR code to download the NHP Contactor Select App.

CACA 7-97 C 5 CA 6-115 7 ) CCA 6-140 7))7 CCA 6-180 7))7 CCA 6-210 8))8 CCA 6-250 8))8 CCA 6-300 8))8 CA 6-420 8)8 CA 6-630 8))8 CCA 6-860 8))8 CA 5-550 CA 5-700 CAA 5-860 C 000CA 5-10 00CA 5-120

130 250 250 250 350 350 450 540 800 1000 760 1000 1100 1200 1350

110 210 210 210 300 300 380 425 - - 605 800 870 960 1085

97 130 155 189 227 258 315 420 630 860 550 700 860 1000 1200

44 53 60 67 85 105 140 170 - - 140 180 210 260 300

57 115 140 180 210 250 300 420 492 - 500 630 700 860 1000

- 46 55 65 80 95 115 160 - - 250 340 380 - -

55 75 90 110 132 150 185 250 355 500 324 430 528 628 737

22 25 32 37 50 55 80 100 - - 81 105 122 151 176

55 111 135 176 205 250 293 424 500 600 510 657 730 897 1043

- 63 75 90 110 132 160 225 - - 355 500 550 - -

90 132 160 160 220 250 335 425 - - 953 1212 1490 1732 2078

165 225 270 300 390 450 550 750 1000 1150 850 1000 - - -

240 320 380 420 560 630 780 1050 - - 110 - - - -

50 81 126 126 176 176 226 252 - - 350 430 500 550 630

50 68 106 106 151 151 191 214 - - 300 9) 360 9) 450 9) 500 9) 600 9)

90 120 140 170 210 250 300 420 - - 315 440 500 560 630

115 144 225 225 315 315 405 450 - - 450 570 700 850 1000

6 10 10 10 10 10 10 10 2 2 5 5 5 1 1

1 0.75 0.75 0.75 0.75 0.75 0.75 1 - - 0.6 0.6 0.6 0.6 0.6

500 120 120 100 120 100 70 70 - - - - - - -

20-40 20-47 20-47 20-47 20-47 20-47 20-47 20-47 60-100 60-100 50-100 50-100 50-100 50-100 50-100

20-40 25-110 25-110 25-110 25-110 25-110 25-110 25-110 70-145 70-145 150-200 10) 150-200 10) 150-200 10) 25-50 25-50

400 380 (650)11)12) 380 (650)11)12) 380 (650)11)12) 380 12) 380 12) 380 12) 490 12) 1915 12) 1915 12) 950 1600 1600 2400 2400240 240 (310)11) 240 (310)11) 240 (310)11) 240 240 240 270 1720 1720 850 1550 1500 2100 2100

24 13 (50) 11) 13(50) 11) 13(50) 11) 13 13 13 18 33 33 11 25 25 70 70

9 6 (10) 11) 6 (10) 11) 6 (10) 11) 6 6 6 7 30 30 10 22 22 60 60

325 265 12) 265 12) 265 12) 265 12) 265 12) 265 12) 340 12) 1980 12) 1980 12) 850 1600 1600 2400 24005.5 6 6 6 6 6 6 7 30 30 10 25 25 70 70

-/8 2/8 2/8 2/8 2/8 2/8 2/8 2/8 2/8 2/8 4/8 4/8 4/8 2/7 2/7

- - - -- - - - - - - - - - - -

- - - - - - - - - - - - - - -

6 12 12 12 12 12 12 12 12 12 12 12 12 12 12

3 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2 2 2 2 2

ELECTRONIC OVERLOAD SELECTIONRONIC OVERLOAD SELECTION

CEP 7-EEHF7 EEHF 30...150 A30 15 CEP 7-EEJG7 EEJG 40...200 A40 20 CEP 7-EEMH 120...600 ACEP 7-EEJF 40...200 A CEP 7-EEKG 60...300 A CEP 7-EENH 160...800 A

CCEP 7-EELG 00...500 100...500 A

ADVANCED ELECTRONIC OVERLOAD SELECTION

CET 5 0.5...5000 A 13)

CURRENT RATINGS

MOTOR STARTER RATINGS AT OPERATIONAL VOLTAGE 400/415 V. ALL kW RATINGS APPROXIMATE

CAPACITOR AND LAMP SWITCHING AT OPERATIONAL VOLTAGE 415 V

MECHANICAL, ELECTRICAL AND COIL DATA

RATINGS CHART

Notes: 1) 200,000 operation cycles. 2) Star point Y = star connected. Star point ∆ = delta

connected star point. 3) Star delta to AS 1202 part 2 class 0.3. 4) For PF correction panels min 6pH inductive or use of

harmonic filters. 5) Maximum current setting to be no more than the rated

current of contactor.

6) Refer to Price List (Part A Section 2) for complete Cat. No and Amp range.

7) Available with standard coil or electronic coil.8) Fitted standard with electronic coil.9) Capacitor switching, rated at 55 ºC.10) E coil adjustable drop-out delay 20 - 1000 ms refer to contactor instructions.11) () standard type coil.12) CA 6 24 AC and 24 DC electronic coils are sensitive to voltage drop;

< 10 ms = 25 Amps start up peak, < 100 ms = 11 Amps pull-in values < 100 ms = 0.5 Amps average hold-in values

13) When fitted with appropriate current converter.

Please scan the QR code to download a copy of this chart.

1 - 4 For further information please contact Sales 1300 NHP NHP or visit nhp.com.au GST not included

1

CA 8 Compact contactor systemSpecial purpose

Q��Compact dimensionsQ��Efficient modular designQ��Rugged constructionQ��High switching capacityQ��Rated up to 690 V ACQ��Low power requirementsQ��Safe designQ��AC and DC coil typesQ��Supplied in screw or push in terminal configurationQ��High electrical and mechanical life spanQ��3 operating versions, 2.2, 4 and 5.5 kWQ��Control relay availableQ��Clip-on accessoriesQ��DIN rail or screw mountingQ��Rated at +60 ºC (+70 ºC with 15 % derating applied)Q��Auxiliary contacts suitable for low voltage switchingQ��IP 20 Finger protection according to IEC 60947

The components of the CA 8 compact contactor system complement each other to form a versatile system with long term dependability. The CA 8 range is a compact system of contactors, relays and accessories with a wide range of application possibilities. Their size and versatility makes them particularly suitable for OEM applications, small control systems and PLC interfacing.

Q��Small motor controlQ��DistributionQ��Lighting loadsQ��Heating systemsQ��Office machinesQ��Swimming pool and sauna controlQ��Refrigeration controlQ��Household appliancesQ��Small package machinesQ��Small conveyor systemsQ��Lifting equipmentQ��Commercial kitchen equipmentQ��Sprinkling and irrigation controlQ��Construction site liftsQ��Heat pumpsQ��Waste water pumpsQ��Roller door controlQ��Automatic blinds barriers and doorsQ��Air conditioning installationsQ��Interface for logic control systems

CA8 type reversing starter, mechanically interlocked

CA8 contactors, fitted with mechanical interlock and RC link

Features

Applications include

1 - 5

1

For further information please contact Sales 1300 NHP NHP or visit nhp.com.au GST not included

CA 7-9 4 kW 9 ACA 7-12 5.5 kW 12 ACA 7-16 7.5 kW 16 ACA 7-23 11 kW 23 A

CA 7-30 15 kW 30 ACA 7-37 18.5 kW 37 A

CA 7-43 22 kW 43 A

CA 7-60 32 kW 60 ACA 7-72 40 kW 72 ACA 7-85 45 kW 85 ACA 7-97 55 kW 97 A

45 mm

45 mm

72 mm

54 mm

CA 7 contactors 4 – 55 kW

Q Front mountingQ Side mounting leftQ Side mounting rightAlternatively you can choose to combine left, right and front mounting auxiliary contacts to fulfil your requirements. Instead of the top mounted auxiliary contacts, on or off delay timing modules or mechanical latches can be fitted.

Q On and off delay pneumatic timersQ Coil mounted electronic timers

on delay, off delay, star-deltaQ Coil mounted 24/48 V DC interfaceQ Coil mounted RC and varistor

suppressor modulesQ Mechanical latchQ Mechanical interlockQ Mechanical interlock with

integrated N/C interlock contactsQ Moulded wire link sets for DOL,

reversing and star-delta startersQ Large choice of front and side

mounting auxiliary contacts

45 mm

45 mm

54 mm

Motor switching rating AC 3 @ 400/415 V

Compact without compromise is the best way to describe the CA 7 range of contactors and motor protection relays from Sprecher + Schuh. In spite of the compact dimensions, the CA 7 range features high breaking capacity and extraordinary flexibility. Up to 18.5 kW the contactors are only 45 mm wide and even the largest 55 kW frame is only 72 mm wide. CA 7 contactors are the main component in the Advanced Control System (ACS).

For special

purpose DC

switching

refer

Section 7

The highest

switching

capacity in

the smallest

space

CA 7 clip-on accessory modules

72 mm

Compact without compromise

With CA 7 you have flexibility with auxiliary contacts Common auxiliaries from 9 to 97 amps Three fitting positions

With CA 7 you have more clip-on accessoriesCommon accessories from 9 to 97 amps

1 - 6

1


Coil terminals are always in the correct positionThe coil terminations on CA 7 contactors can be supplied optionally at the top or bottom of the contactor. It is also a simple task to change this arrangement on-site should the requirements change. When CA 7 contactors are used in combination with KTA 7 motor circuit breakers the bottom coil terminations are used. When used with standard CT 7N thermal or CEP 7 electronic overloads the top coil terminals should be selected.

Advanced safety and reliability featuresThe entire CA 7 line features mechanically linked contacts, such that if a main power pole welds, adequate clearances exist (>0.3 mm) to ensure that the auxiliary contacts do not change state when coil power is removed and device tries to open. This is a requirement in safety circuits. Reliability is further assured by ‘cross-stamped’ auxiliary contacts, which provide multi-point reliability in low current, low voltage applications.

CA 7 contactors 4 – 55 kW

Mechanical interlocks save spaceOnly 9 mm wide, the CM 7 mechanical interlock snaps into place between any of the CA 7 contactors. You can also interlock different sizes of the CA 7 range with the same interlock. The basic mechanical interlock is supplemented by a variation with built-in N/C auxiliary contacts for electrical interlocking. This version is also only 9 mm wide and further minimises space requirements.

CA 7 contactors provide improved wiring terminalsThe main terminals of all CA 7 contactors are designed to accept at least two cables. At the same time they comply with safety standards regarding touch protection. The larger contactors CA 7-30 and upwards employ a special cage terminal which allows the connec-tion of two cables in separate chambers. The ease of wiring with CA 7 contactors saves both time and money.

With Sprecher + Schuh you can choose the best protection for your motors

CEP 7CCT 7N CEP 7-ED CEP 7-EE

Innovation

and ease of use

provide solutions

for your control

systems

1 - 7

1


CA 6 contactors55 – 500 kW (63 - 220 kW @ 1000 volts)

CA 6 - A complete rangeThe CA 6 range of contactors is now available up to 860 amps in four frame sizes. The range now incorporates nine sizes from 55 to 500 kW @ 400/415 volts and 63 to 220 kW @ 1000 volts.

Electronically controlled mechanism (ECM)The electronically controlled mechanism has, with the release of the larger CA 6 contactors, been further improved. As well as providing the unique advantages of electronic coil control, the ECM version now includes a built-in PLC interface. These are identified with the suffix EI on the Cat. No.

What is “ECM”ECM stands for “Electronically Controlled Mechanism”. With the version EI, an electronic circuit regulates the voltage to the contactor coil. This is achieved using an ASIC (application specific integrated circuit) which precisely controls the pick-up and drop-out levels of the contactor. This provides decisive advantages for the user.

Q Very low pick-up and hold coil consumption (constant VA)Q No contact chatter because of defined pick-up and drop-out voltagesQ High contact reliability due to minimised tendency to contact bounceQ Built-in suppression circuitsQ Built-in PLC interfaceQ Wide voltage tolerance of coils suitable for 50/60 Hz (DC versions also available)Q EMC compatibility: (Note EMC is not to be confused with ECM. EMC means that the contactors

also conform to electromagnetic compatibility standards for noise emission and immunity)

Robust and versatileQ Rated up to 1000 voltsQ Type ‘2’ co-ordination with fuses or circuit breakersQ High thermal capacityQ High switching capacityQ Mechanical interlock does not increase overall widthQ Up to 8 auxiliary contactsQ Flexible busbars and mounting plates available for quick assembly of starter combinationsQ Choice of electronic motor protectionQ Plug-in voltage suppressors

Safety firstQ Arc chamber cannot be removed with the contactor energisedQ Contactor cannot be energised unless arc chambers are locked into placeQ Switch position indicator (manual operation of contactor not possible)Q Closed arc chambers prevent hot gases escaping. Safety distance in front of contactor not necessaryQ Touch-proof design using special insulated terminal blocks and terminal coversQ No cadmium or asbestos (environmentally safe)

Contactors with electronically controlled mechanism (ECM) tested to IEC 60947

CA 6

CA 6-180-EI is a 90 kW (@ 1000 V) contactor with ECM

Unique

low power

consumption

electronic coil

system

Extremely low pick-up and hold-in coil consumption compared with conventional contactors.

Cat. No. 400/415 V AC-3 kW

690 V AC-3 kW

1000 V AC-3 kW

CA 6-115-(EI) 63 100 63CA 6-140-(EI) 80 110 75CA 6-180-(EI) 100 132 90CA 6-210-EI 125 200 110CA 6-250-EI 150 250 132CA 6-300-EI 160 300 160CA 6-420-EI 250 425 220CA 6-630-EI 355 500 –CA 6-860-EI 500 600 –

1 - 8

1


1

CA 5 contactors257 – 710 kW (280 – 550 kW @ 1000 Volts)

The complete contactor for heavy industrial applicationsCA5 Series contactors provide large kilowatt performance with a design that is up to 40 % smaller than traditional contactors of this rating. The entire range is modularly designed for easy inspection, contact replacement and coil changeover. All maintenance can be performed from the front so that mounting can be accomplished with no wasted space on the sides.

Specially designed shock-free contact systemA characteristic of contactors in this size class is to transmit intense impact forces during operation. This is caused by the heavy magnetic armatures of the core, which can cause contact “bounce.” CA5 contactors, however, are designed so that the operating planes of the electromagnets and the contacts are opposed to each other by 90°. This results in a bounce-free contact system, increasing the contactor’s mechanical life and raising contact reliability.

Rugged and reliableA massive steel framework supporting the magnet system ensures high stability in all applications. Low-wear materials for bearings and sliding surfaces, as well as generously dimensioned magnet-pole faces result in above average mechanical life with a minimum of maintenance. Despite their rugged construction, overall contactor weight has been reduced considerably permitting simpler panel construction and easier assembly.

Unique coil “feeder group”offers many advantagesCA5-700 and 860 contactors are equipped with a special “feeder group” for the coil that accommodates AC control voltages of 50 or 60 Hz, and a wide range of DC voltages. This coil arrangement eliminates noise and provides very low pickup and hold-in current. In addition, the dropout time of the coil can be adjusted within one of three ranges.

Normal Drop (150 to 200 ms): for prompt reaction of contactor to a breaking command (factory setting).

Delayed Drop (0.5 to 1 s): where it is necessary for the contactor to be immune to short power supply interruptions or uncertain control devices.

Fast Drop (about 20 ms): for safety applications where instant dropout is required.

CA 5-450

Direction of main contacts

Direction of electromagnets (coil armature)

Modular, convenient designThe CA5 line is modularly designed for easy inspection, coil change and contact replacement. Maintenance can be performed from the front so that mounting requires no additional space. Even with the installation of mechanical interlocks and auxiliary contact blocks, the units can be flush mounted side by side, saving panel space.

1. CA5-700 Contactor2. CA5-1000 Contactor3. Coil Pair4. Feeder Group5. 4th Pole (Neutral Switching)6. Auxiliary Contact Block7. Auxiliary Contact Block8. Mechanical Interlock (horizontal)9. Mechanical Interlock (vertical)

A full range of CA5 accessories is available, including a unique mechanical interlock that allows vertical mounting of contactors (see explanation above)

1 - 9

1


1000 V contactor CA 5-5501000 V contactor CA 5-450 1000 V contactor CA 5-860

1000 volt contactorsCA 6 1000 volt contactor system

The latest in switching technology up to 1000 voltsThe CA 6 contactors offer the latest in switching technology up to 1000 volts, from Sprecher + Schuh. The development of the CA 6 range now covers the CA 6-95 to the CA 6-420, the complete range covering 1000 volt, AC 3 ratings up to 220 kW, with 400/415 volt ratings up to 500 kW. Special design features of these contactors include a unique electronically controlled mechanism (ECM) which is standard on all sizes. (refer page 1 - 7).

A choice of motor protectionElectronic overload relay CEP7-E and CET 5 electronic motor protection relays are also rated at 1000 volts. They are ideally suited for combining with the CA 6 and CA 5 contactors providing a choice of quality motor protection solutions.

The CET 5 electronic motor protection relay can be combined with S+S 1000 volt contactors.

High current contactors CA 5The CA 5-450 … CA 5-860 high current contactors combine high switching currents up to 1000 volts together with low coil power consumption due to a specially designed coil and magnet system. These rugged and reliable contactors extend the 1000 volt switching capacities of Sprecher + Schuh contactors up to 550 kW as well as being suitable for AC 3 400/415 volt applications up to 710 kW.

Compact 90 kW 1000 volt starter with CEF 1 electronic motor protection.

CA6

CEP7

1 - 10

1


AC contactors3 pole open type with AC coil

CA 6-860-EI

Notes: 1) 1000 volt ratings in ( ). 2) Add control voltage to Cat. No. when ordering: 24, 32, 110, 240, 415, 440 V 50 Hz. (CA6 conventional coils) Standard voltages for CA 6-115-EI…250-EI are 24, 110, 240 and 415 V 50 Hz. Standard voltages for CA 6-300-EI…420-EI 110, 240 and 415 V 50 Hz. Standard voltages for CA 5-450…1200, 110, 240 and 415 V 50 Hz. 3) Electronically controlled mechanism (ECM) with interface suffix (EI). 240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038: 2000.

AC 3 rating at 60° C

CA 7-9

CA 7-72

CA 6-115-EI

CA 6-250-EI

Price Schedule CA 7 ‘AA’, CA 8 ‘A1’CA 6 up to 420 ‘AA’CA 6 - 630/860 & CA5 ‘A1’

CA 8-5

AC 3 400/415 V kW 1)

AC 3 400/ 415 VAmps 1)

AC 3690 V kW

AC 1Amps40 ˚C

Auxiliary contacts standard With

standard coilPrice $N/O N/C Max. Cat. No. 2)

2.2 4.9 2.2 20 1 0 5 CA 8-5-10_ AC 102.002.2 4.9 2.2 20 0 1 5 CA 8-5-01_ AC 102.004 8.5 4 20 1 0 5 CA 8-9-10_ AC 116.004 8.5 4 20 0 1 5 CA 8-9-01_ AC 116.005.5 11.5 5.5 20 1 0 5 CA 8-12-10_ AC 141.005.5 11.5 5.5 20 0 1 5 CA 8-12-01_ AC 141.004 9 4 32 1 0 9 CA 7-9-10_V AC 122.00

0 1 9 CA 7-9-01_V AC 122.005.5 12 5.5 32 1 0 9 CA 7-12-10_V AC 155.00

0 1 9 CA 7-12-01_V AC 155.007.5 16 7.5 32 1 0 9 CA 7-16-10_V AC 199.00

0 1 9 CA 7-16-01_V AC 199.0011 23 11 32 1 0 9 CA 7-23-10_V AC 295.00

0 1 9 CA 7-23-01_V AC 295.0015 30 15 65 0 0 8 CA 7-30-00_V AC 390.0018.5 37 18.5 65 0 0 8 CA 7-37-00_V AC 470.0022 43 22 85 0 0 8 CA 7-43-00_V AC 590.0032 60 32 100 0 0 8 CA 7-60-00_V AC 820.0040 72 40 100 0 0 8 CA 7-72-00_V AC 910.0045 85 45 100 0 0 8 CA 7-85-00_V AC 1060.0055 97 55 130 0 0 8 CA 7-97-00_V AC 1330.0075 (63) 130 (46) 100 250 1 1 8 CA 6-115-11_V AC 1600.0075 (63) 130 (46) 100 250 1 1 8 CA 6-115-EI-11_V AC 3) 1880.0090 (75) 155 (55) 110 250 1 1 8 CA 6-140-11_V AC 2120.0090 (75) 155 (55) 132 250 1 1 8 CA 6-140-EI-11_V AC 3) 2400.00110 (90) 189 (65) 135 250 1 1 8 CA 6-180-11_V AC 2480.00110 (90) 189 (65) 135 250 1 1 8 CA 6-180-EI-11_V AC 3) 2690.00132 (110) 225 (80) 205 350 1 1 8 CA 6-210-EI-11_V AC 3) 3420.00150 (132) 258 (95) 250 350 1 1 8 CA 6-250-EI-11_V AC 3) 4390.00185 (160) 315 (115) 300 450 1 1 8 CA 6-300-EI-11_V AC 3) 4910.00250 (225) 420 (160) 425 540 1 1 8 CA 6-420-EI-11_V AC 3) 6450.00355 630 500 800 1 1 8 CA 6-630-EI-11_V AC 10240.00500 860 600 1000 1 1 8 CA 6-860-EI-11_V AC 16730.00257 (280) 450 (200) 375 700 2 2 8 CA 5-450_V AC 6360.00315 (355) 550 (250) 500 800 2 2 8 CA 5-550_V AC 8500.00415 (500) 700 (340) 630 1000 2 2 8 CA 5-700_V AC 9910.00515 (550) 860 (380) 710 1100 2 2 8 CA 5-860_V AC 16540.00600 1000 850 1250 1 1 8 CA 5-1000_V AC 27110.00710 1200 1000 1350 1 1 8 CA 5-1200_V AC 29420.00

1 - 11

1


GH62

GH76

Aux. contact blockCat. No. CA 5-EB-11

Notes: 1) Rating at 55 ºC, maximum allowable rating 60 ºC at 0.85 derating. 2) For AC-4 ratings contact NHP Technical Support. 3) Available in standard control voltages 110 V, 240 V, 415 V 50 Hz. Contact NHP for other coil voltages. For dimensions, refer to pages 4 – 52 to 4 – 54.

240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038 : 2000.

Accessories and spares for 3 and 4 pole contactors Auxiliary contact blocks

Price Schedule ‘A2’Except GH55 and above ‘A1’

GH15T.11

AC contactorsType GH - 3 pole - open type

GH15KT

GH8

Pneumatic timers

Mechanical interlock (horizontal) 7)

AC-3415 V/ 50 Hz kW 1)2)

AC-3415 V/ 50 HzAmps 1)2)

AC-31000 V/ 50Hz kW

AC-31000 V/ 50 Hz Amps

AC-1690 V/ 40º C Amps

Auxiliary contacts

Cat. No. 3)

With standard

coil Price $Standard Max.

N/O N/C N/O N/C11 25 - - 45 - - 7 5 � GH15ET3_VAC 4) 320.0015 32 - - 50 - - 7 5 GH15FT3_VAC 4) 420.0021 40 - - 63 - - 7 5 GH15GT3_VAC 4) 620.0030 63 - - 100 - - 7 5 GH15JT3_VAC 4) 910.0040 80 37 28 125 - - 7 5 GH15KT3_VAC 5) 1080.0047 95 37 30 125 - - 7 5 GH15LT3_VAC 5) 1280.00115 210 110 85 350 - - 7 5 GH15RT3_V 5) 6) 2340.00257 450 280 200 700 2 2 4 4 GH55B_VAC 5) 6) 7070.00315 550 355 250 800 2 2 4 4 GH57B_VAC 5) 6) 9000.00415 700 500 340 1000 2 2 4 4 GH62_VAC 5) 6) 9910.00515 860 550 380 1100 2 2 4 4 GH64_VAC 5) 6) 16540.00600 1000 - - 1200 1 2 7 8 GH76_VAC 4) 25850.00710 1200 - - 1350 1 2 7 8 GH78_VAC 4) 28050.00415 700 - - 1600 4 4 8 8 GH82_VA 4) 28400.00515 860 - - 2000 4 4 8 8 GH84_VA 4) 29800.00

To suitcontactor

Amps230/240 V

AC 15400/415 V

ContactsN/O N/C Cat. No. Price $

GH15 3 2 1 1 side mount GH15S11 73.50GH15 3 2 1 1 top mount GH15T11 68.00GH15 3 2 2 2 top mount GH15T22 85.00GH15 3 2 3 1 top mount GH15T31 85.00GH15 3 2 4 - top mount GH15T40 85.00GH5_/6_/82_84 3 2 2 2 front mount CA 5-EF-22 6) 350.00GH76 - 78 3 2 1 1 side mount CA 5-EB-11 350.00

To suit contactor Timing range Cat. No. Price $GH15 0.3 - 30 seconds GHPT30 350.00GH15 10 - 180 seconds GHPT180 350.00

To suit contactor Cat. No. Price $ 8)GH15-BN-EN-FN-GN-HN-JN-LN-JT-KT-LT-MT BMOHMI 56.50GH15-MN-NN-PN-NT-RT-ST-TT-RN-SN-TN BM3H 166.00

4) 690 V, 50 Hz contactors.5) 1000 V 50 Hz contactors.6) Dual supply AC/ DC coils.7) Vertical interlocks refer to page 1 - 31. Not available for G15. 8) Not fitted, order separately.

1 - 12

1


Notes: 1) 1000 volt ratings ( ). 2) Add control voltage to Cat. No. when ordering: 24, 48, 110 and 240 V DC for CA 7. 24, 48 and 110 V DC for CA 6-115-L...180L. 24, 110 and 220 V DC for CA 6-115EI...420 EI. For CA 7, the suffix ‘D’ denotes ‘fitted with a suppressor or diode’. This is standard on CA 7-60…97 (24 V DC only) All DC contactors use AC contactor accessories. 3) Electronically controlled mechanism (ECM) with interface suffix (EI). 4) For CA 5 and CA 6-630/860 DC operation the AC version should be ordered. 110 V AC = 110 V DC, 240 V AC = 220 V DC, 400/415 V AC = 380 V DC

AC 3 400/415 V kW 1)

AC 3 400/415 V Amps 2)

AC 3 690 VkW

AC 1Amps40 ˚C

Auxiliary contacts standard

N/O N/C Max. Cat. No. 2)

With standard

coilPrice $

2.2 4.9 2.2 20 1 0 5 CA 8-5C-10_VDC 215.002.2 4.9 2.2 20 0 1 5 CA 8-5C-01_VDC 215.004 8.5 4 20 1 0 5 CA 8-9C-10_VDC 225.004 8.5 4 20 0 1 5 CA 8-9C-01_VDC 225.005.5 11.5 5.5 20 1 0 5 CA 8-12C-10_VDC 245.005.5 11.5 5.5 20 0 1 5 CA 8-12C-01_VDC 245.004 9 4 32 1 0 9 CA 7-9E-10_VDC 315.00

0 1 9 CA 7-9E-01_VDC 315.005.5 12 5.5 32 1 0 9 CA 7-12E-10_VDC 375.00

0 1 9 CA 7-12E-01_VDC 375.007.5 16 7.5 32 1 0 9 CA 7-16E-10_VDC 410.00

0 1 9 CA 7-16E-01_VDC 410.0011 23 11 32 1 0 9 CA 7-23E-10_VDC 560.00

0 1 9 CA 7-23E-01_VDC 560.0015 30 15 65 0 0 8 CA 7-30E-00_VDC 630.0018.5 37 18.5 65 0 0 8 CA 7-37E-00_VDC 800.0022 43 22 85 0 0 8 CA 7-43E-00_VDC 950.0032 60 32 100 0 0 8 CA 7-60D-00_VDC 1300.0040 72 40 100 0 0 8 CA 7-72D-00_VDC 1380.0045 85 45 100 0 0 8 CA 7-85D-00_VDC 1470.0055 97 55 130 0 0 8 CA 7-97D-00_VDC 1620.0075 (63) 130 (46 ) 100 250 1 1 6 CA 6-115-L-22_VDC 1820.0075 (63) 130 (46) 100 250 1 1 8 CA 6-115-EI-11_VD 3) 2140.0090 (75) 155 (55) 110 250 1 1 6 CA 6-140-L-22_VDC 2310.0090 (75) 155 (55) 132 250 1 1 8 CA 6-140-EI-11_VDC 3) 2680.00110 (90) 189 (65) 135 250 1 1 8 CA 6-180-L-22_VDC 3) 2640.00110 (90) 189 (65) 135 250 1 1 8 CA 6-180-EI-11_VDC 3) 2990.00132 (111) 225 (80) 205 350 1 1 8 CA 6-210-EI-11_VDC 3) 3720.00150 (133) 258 (95) 250 350 1 1 8 CA 6-250-EI-11_VDC 3) 4790.00185 (163) 315 (115) 300 450 1 1 8 CA 6-300-EI-11_VDC 3) 5340.00250 (225) 425 (160) 425 500 1 1 8 CA 6-420-EI-11_VDC 3) 6880.00355 630 500 800 1 1 8 CA 6-630-EI-11_VAC 4) 10240.00500 860 600 1000 1 1 8 CA 6-860-EI-11_VAC 4) 16730.00257 (280) 450 (200) 375 600 1 1 8 CA 5-450_V AC 4) 6360.00315 (355) 550 (250) 500 780 2 2 8 CA 5-550_V AC 4) 8500.00415 (500) 700 (340) 630 1000 2 2 8 CA 5-700_V AC 4) 9910.00515 (550) 860 (380) 710 1100 2 2 8 CA 5-860_V AC 4) 16540.00

DC operated AC contactors3 pole open type

For DC operated AC contactors with continuously rated coils

CA 7-85D

CA 6-115…VDC

CA 6-860…VDC

Price Schedule CA 8 ‘A1’, CA 7 ‘AA’CA 6 up to 420 ‘AA’ CA 6 - 630/860 & CA 5 ‘A1’

CA 8-5C

CA 7-12E

CA 7-37E

1 - 13

1


CA 7-9C

CA 7-30C

DC operated AC contactors3 pole open type

CA 7-E Contactors and relays with low holding power, electronic coilSprecher + Schuh has expanded it’s successful range of CA 7-E industrial contactors and relays with a new low consumption coil. The 24 V DC coil with low power consumption is integrated in a small contactor body and draws less than 1.5 W/ 60 mA holding power. The CA 7-E range now replaces the CA 7-C range listed below.

The new design results in a lighter, lower depth and more energy efficient contactor, easy wiring and uniform panel appearance.

FeaturesQ Low consumption DC electronic coilsQ Coil voltages: 12 V, 24 V, 48...72 V, 110...125 V, 220...250 V DCQ Low contactor depth, same dimensions as AC devicesQ Meets IEC, UL and CSA standardsQ Common accessories for AC + DC contactors (except electronic timers)Q Reversible coil terminations (line or load side)Q PLC control without need for interposing relay

Notes: 1) All CA 7 coils can be reversed for line-load side coil terminations as required. 2) All DC contactors use AC contactor accessories. 3) All conventional coil contactors superceded 2013.Price Schedule ‘AA’

AC 3 400/415 VkW

AC 3 400/415 V Amps

AC 3690 VAmps

AC 1Amps40 ˚C

Auxiliary contacts standard

Cat. No. 2) Price $N/O N/C Max.4 9 5 32 1 0 9 CA 7-9C-10-24V DC 1) 365.00

0 1 9 CA 7-9C-01-24V DC 1) 365.005.5 12 7 32 1 0 9 CA 7-12C-10-24V DC 1) 410.00

0 1 9 CA 7-12C-01-24V DC 1) 410.007.5 16 9 32 1 0 9 CA 7-16C-10-24V DC 1) 470.00

0 1 9 CA 7-16C-01-24V DC 1) 470.0011 23 12 32 1 0 9 CA 7-23C-10-24V DC 1) 630.00

0 1 9 CA 7-23C-01-24V DC 1) 630.0015 30 18 65 0 0 8 CA 7-30C-00-24V DC 1) 690.0018.5/20 37 21 65 0 0 8 CA 7-37C-00-24V DC 1) 930.0022 43 25 85 0 0 8 CA 7-43C-00-24V DC 1) 1020.00

Conventional DC operated AC contactors 3)Range to be superseded in 2013.

1 - 14

1


AC contactors4 Pole open type with AC coil

Ratings to IEC 60947 and AS 3947 400/415 V

4 pole – open type with AC coil 1)

Notes: 1) All CA 7 coils can be reversed for line or load-side coil terminations as required. 2) Contact NHP for recommended cable size. 3) Add control voltage to Cat. No. when ordering: 24, 32, 110, 240, 415, 440 V AC 50 Hz. Standard voltage 240 V AC 50 Hz, other voltages available on request. Auxiliaries, accessories and spares refer to page 1 - 22. 240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038 : 2000.

CA 7-9-M40

Price Schedule ‘AA’

CA 8-9M

AC 3 400/415 V kW

AC 3 400/415 V Amps

AC 1 2) amps40 ˚C

AC 1 2) amps60 ˚C enclosed

Main poles

Cat. No. 3)

With standard

coilsPrice $N/O N/C

Max. Aux.

4 8.5 20 16 4 0 8 CA 8-9-M40_V AC 147.004 8.5 20 16 2 2 8 CA 8-9-M22_V AC 147.004 8.5 20 16 3 1 8 CA 8-9-M31_V AC 147.004 9 32 32 4 0 8 CA 7-9-M40_V AC 158.004 9 32 32 2 2 8 CA 7-9-M22_V AC 158.004 9 32 32 3 1 8 CA 7-9-M31_V AC 158.005.5 12 32 32 4 0 8 CA 7-12-M40_V AC 186.005.5 12 32 32 2 2 8 CA 7-12-M22_V AC 186.005.5 12 32 32 3 1 8 CA 7-12-M31_V AC 186.007.5 16 32 32 4 0 8 CA 7-16-M40_V AC 245.007.5 16 32 32 2 2 8 CA 7-16-M22_V AC 245.007.5 16 32 32 3 1 8 CA 7-16-M31_V AC 245.0011 23 32 32 4 0 8 CA 7-23-M40_V AC 370.0011 23 32 32 2 2 8 CA 7-23-M22_V AC 370.0011 23 32 32 3 1 8 CA 7-23-M31_V AC 370.0018.5 37 75 4 0 8 CA 7-40-M40_V AC 630.0018.5 37 75 2 2 8 CA 7-40-M22_V AC 630.0045 85 130 4 0 8 CA 7-90-M40_V AC 1470.0045 85 130 2 2 8 CA 7-90-M22_V AC 1560.00

1 - 15

1



AC contactors4 Pole open type with DC coil

4 pole – open type with DC coil

Ratings to IEC 60947 and AS 3947 400/415 V

Notes: 1) Contact NHP for recommended cable size. 2) Add control voltage to Cat. No. when ordering CA 8 contactors DC 24, 48, 110, 240 V. CA 7 contactors DC 24, 48..72, 110..125, 220..250 V. 3) Standard voltage 24 V DC, other voltages available on request.

All conventional coil contactors will be superceded in 2013. Auxiliaries, accessories and spares, refer to page 1 - 22.

4 Pole open type 24 V DC coil - conventional coil 3)

CA 7-12E

CA 8-9CM

AC 3 400/415 V kW

AC 3 400/415 V Amps

AC 1 1) amps40 ̊ C

AC 1 1) amps60 ˚C enclosed

Main poles

Cat. No. 2)

With standard

coilPrice $N/O N/C

Max.Aux.

4 8.5 20 16 4 0 8 CA 8-9C-M40_V DC 3) 235.004 8.5 20 16 2 2 8 CA 8-9C-M22_V DC 3) 235.004 8.5 20 16 3 1 8 CA 8-9C-M31_V DC 3) 235.004 9 32 32 4 0 8 CA 7-9E-M40_V DC 315.004 9 32 32 2 2 8 CA 7-9E-M22_V DC 315.005.5 12 32 32 4 0 8 CA 7-12E-M40_V DC 375.005.5 12 32 32 2 2 8 CA 7-12E-M22_V DC 375.007.5 16 32 32 4 0 8 CA 7-16E-M40_V DC 410.007.5 16 32 32 2 2 8 CA 7-16E-M22_V DC 410.0011 23 32 32 4 0 8 CA 7-23E-M40_V DC 560.0011 23 32 32 2 2 8 CA 7-23E-M22_V DC 560.0018.5 37 75 75 4 0 8 CA 7-40E-M40_V DC 740.0018.5 37 75 75 2 2 8 CA 7-40E-M22_V DC 740.00

AC 3 400/415 V kW

AC 3 400/415 V Amps

AC 1 1) amps40 ˚C

AC 1 1) amps60 ˚Cenclosed

Main poles

Cat. No. 3)

With standard

coilPrice $N/O N/C

Max. Aux.

4 9 32 32 4 0 8 CA 7-9C-M40 24V DC 365.004 9 32 32 2 2 8 CA 7-9C-M22 24V DC 365.005.5 12 32 32 4 0 8 CA 7-12C-M40 24V DC 410.005.5 12 32 32 2 2 8 CA 7-12C-M22 24V DC 410.007.5 16 32 32 4 0 8 CA 7-16C-M40 24V DC 480.007.5 16 32 32 2 2 8 CA 7-16C-M22 24V DC 480.0011 23 32 32 4 0 8 CA 7-23C-M40 24V DC 630.0011 23 32 32 2 2 8 CA 7-23C-M22 24V DC 630.00

Range to be superseded in 2013.

1 - 16

1


Contactor type

Fluorescent not compensated Ie max. (A)

Lamps AC 5a not compensated Ie max. (A)

Incandescent lamps AC 5b Ie max. (A)

GH15BN 9 6 8GH15EN 22 15 17GH15GN 38 26 32GH15HN 45 30 40GH15JN 60 40 50

GH15JN

AC contactors4 pole - open type Type GH15

Ratings to AS 1029 (400/415 V)

GH15BN

GH15EN

GH15GN

GH15HN

Notes: 1) Maximum 60 °C allowable at 0.85 derating. 2) Standard control voltages 24, 110, 240, 415 V AC 50 Hz. Other voltage coils on application. 3) Add control voltage to Cat. No. when ordering. 4) DIN style contactor - clip-on auxiliary contacts. 5) 22 = 2 N/O + 2 N/C main poles, 04 = 4 N/C main poles. 6) Coils are AC/DC. 7) Not all coil voltages are stocked, contact NHP for availability. 240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038 : 2000.

Lighting ratings of GH15 contactors (AC 5a and AC 5b) to IEC 947

4 pole contactor (with N/O and/or N/C poles)

Q Main poles available in 4 N/O, 4 N/C, or 2 N/O / 2 N/CQ Applications include - lighting circuits, power supply systems, etcQ IP 20 touch protectionQ Rated up to 400 amps AC 1 (315 amps AC 3)

Lighting circuit switching (µe = 440 V)

GH15NN

GH15LN-40

Price Schedule ‘A2’

Amps AC1 Main polesAux.

contacts 4) Max.Cat. No. 3) 7)

With standard

coil 2)Price $Amps 1) kW40 °C 55 °C N/O N/C N/O N/C

25 21 9 4.3 4 0 6 4 GH15BN-40_V 181.0025 21 9 4.3 2 2 6 4 GH15BN-22_V 5) 205.0025 21 9 4.3 0 4 6 4 GH15BN-04_V 5) 250.0045 38 25 11 4 0 6 4 GH15EN-40_V 370.0050 42 32 15 4 0 6 4 GH15FN-40_V 485.0063 53 40 18.5 4 0 6 4 GH15GN-40_V 670.0063 53 40 18.5 2 2 6 4 GH15GN-22_V 5) 740.0063 53 40 18.5 0 4 6 4 GH15GN-04_V 5) 870.0080 68 50 22 4 0 6 4 GH15HN-40_V 770.00100 85 63 34 4 0 6 4 GH15JN-40_V 1060.00125 105 95 45 4 0 6 4 GH15LN-40_V 1520.00125 105 95 45 2 2 6 4 GH15LN-22_V 1630.00125 105 95 45 0 4 6 4 GH15LN-04_V 1660.00200 169 115 55 4 0 6 4 GH15MN-40_V 1830.00230 195 150 75 4 0 6 4 GH15NN-40_V 2460.00250 212 175 90 4 0 6 4 GH15PN-40_V 2910.00350 - 210 110 4 0 6 4 GH15RN_V 6) 3820.00450 - 260 132 4 0 6 4 GH15SN_V 6) 4840.00500 - 315 160 4 0 6 4 GH15TN_V 6) 6510.00

AC 3 55 °C

1 - 17

1


AC contactors4 pole - open type 6). Type GH55 to GH78

GH55CA5-450/550

GH62CA5-700/860

GH76CA5-1000/1200

Ratings to AS 1029 (400/415 V)

Notes: 1) Maximum 60 °C allowable at 0.85 derating. 2) Standard control voltages 110 V, 240 V, 415 V 50 Hz. GH55/57/62/64 can be AC or DC. Other voltage coils on application. 3) Add control voltage to Cat. No. when ordering. 4) Screw-on auxiliary contacts. 5) 1000 volt contactors. 6) The 4th pole contacts feature early make/ late break, relative to main contacts. 240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038 : 2000.

3 pole contactor with add-on 4th pole (all main poles normally open)

Other selections of 4th poles are available (refer below for details)

Lighting ratings of GH55 to GH78 contactors (AC 5a and AC 5b) to IEC 947Lighting circuit switching (µe = 440 V)


Add-on 4th pole for assembly onto 3 pole GH contactors

Amps AC1 AC 3 55 °C 1)4th poleAC 1 40 °C amps

Aux. contacts 4)

Cat. No. 3)

With standard

coil 2)Price $

Standard Maximum40 °C 55 °C amps kW N/O N/C N/O N/C600 510 450 265 500 2 2 4 4 GH55+NP500_V 5) 7390.00760 645 550 325 760 2 2 4 4 GH57+NP760_V 5) 9630.001000 850 700 430 1000 2 2 4 4 GH62+NP1000_V 5) 11110.001100 930 860 520 1000 2 2 4 4 GH64+NP1000_V 5) 17750.001250 1020 1000 600 1000 1 2 3 4 GH76+NP1000_V 28580.001350 1150 1200 710 1000 1 2 3 4 GH78+NP1000_V 30910.00

Amp rating To suit contactors CA5 Cat. No. Price $325 GH55, GH57 450, 550 NP325-5 860.00

500 GH55, GH57 450, 550 NP500-5 1030.00

760 GH55, GH57 450, 550 NP800-5 1030.00

500 GH62, GH64 700, 860 NP500-6 1030.00

1000 GH62, GH64 700, 860 NP1000-6 1210.00

1000 GH76, GH78 700, 860 NP1000-7 1320.00

Contactor type CA5

Fluorescent AC 5a not compensated Ie max. (A) AC1 (A)

Fluorescent AC 5a compensated Ie max. (A)

Incandescent lamps AC 5b Ie max. (A)

GH55 450 360 700 300 260GH57 550 450 800 360 315GH62 700 570 1000 460 440GH64 860 700 1100 550 500GH76 1000 850 1200 660 560GH78 1250 1000 1350 800 630

1 - 18

1


Ratings @ 400/415 Volts AC Auxiliary ContactsCat. No. 2) 3) Price $AC 3 kW AC 3 amps N/O N/C

75 130 2 2 CAS 6-115-22_VAC POA75 130 2 2 CAS 6-115-EI-22_VAC 2180.0090 155 2 2 CAS 6-140-22_VAC 2340.0090 155 2 2 CAS 6-140-EI-22_VAC 2850.00100 180 2 2 CAS 6-180-22_VAC 2700.00100 180 2 2 CAS 6-180-EI-22_VAC 2850.00132 225 2 2 CAS 6-210-EI-22_VAC 3750.00150 258 2 2 CAS 6-250-EI-22_VAC 4950.00185 315 2 2 CAS 6-300-EI-22_VAC 5390.00250 425 2 2 CAS 6-420-EI-22_VAC 7010.00355 630 2 2 CAS-6-630-EI-22_V 11070.00500 860 2 2 CAS-6-860-EI-22_V 17940.00

Price Schedule CAS 7 ‘AA’Price Schedule CAS 6 ‘A1’

Safety contactors CAS AC operated

Safety contactorsQ AC controlQ 3 main contactsQ Positively guided contacts (mirror contacts) according to IEC 947Q Mechanically linked contactor and auxiliary contact block to IEC 947Q Protection against unintended actuationQ Auxiliary contacts are electronically compatible according to DIN 19240Q Auxiliary contact blocks cannot be removed – vibration resistant 5)Q Above 23 amps, i.e. -14C version, standard N/O side-mounting auxiliary contact providedQ Reversible coil terminals for CAS 7 rangeQ Category B4 endorsement

CAS 7 - 9…23 - 14C

Safety contactors (3 main contacts) AC operated CAS 7

AC Controlled safety contactors CAS 6

Notes: 1) 110, 240 V 50 Hz available as standard. 2) 240 V 50 Hz available as standard. 3) Please enquire regarding other AC control voltages and contact configurations. 4) Supplied fitted with standard N/O side mounting auxiliary contact. 5) Accessories need to be side or coil mounted, not top mounted.

Ratings @ 400/415 Volts AC Auxiliary ContactsCat. No. 1) 3) Price $AC 3 kW AC 3 amps N/O N/C

4 9 1 4 CAS 7-9-14C_VAC 270.005.5 12 1 4 CAS 7-12-14C_VAC 280.007.5 16 1 4 CAS 7-16-14C_VAC 330.0011 23 1 4 CAS 7-23-14C_VAC 495.0015 30 1 4 CAS 7-30-14C_VAC 4) 590.0018.5 37 1 4 CAS 7-37-14C_VAC 4) 680.0022 43 1 4 CAS 7-43-14C_VAC 4) 740.0030 60 1 4 CAS 7-60-14C_VAC 4) 1040.0037 72 1 4 CAS 7-72-14C_VAC 4) 1170.0045 85 1 4 CAS 7-85-14C_VAC 4) 1600.00

1 - 19

1


Ratings @ 400/415 Volts AC Auxiliary ContactsCat. No. 1)2)3) Price $AC 3 kW AC 3 amps N/O N/C

4 9 1 4 CAS 7-9E-14C_VDC 400.005.5 12 1 4 CAS 7-12E-14C_VDC 435.007.5 16 1 4 CAS 7-16E-14C_VDC 520.0011 23 1 4 CAS 7-23E-14C_VDC 640.0015 30 1 4 CAS 7-30E-14C_VDC 3) 790.0018.5 37 1 4 CAS 7-37E-14C_VDC 3) 950.0022 43 1 4 CAS 7-43E-14C_VDC 3) 1090.0030 60 1 4 CAS 7-60D-14C_VDC 3) 1400.0037 72 1 4 CAS 7-72D-14C_VDC 3) 1670.0045 85 1 4 CAS 7-85D-14C_VDC 3) 1790.00

Safety contactors (3 main contacts) DC operated CAS 7

Ratings @400/415 Volts AC Auxiliary ContactsCat. No. 1)3) Price $AC 3 kW AC 3 mps N/O N/C

75 130 3 3 CAS 6-115-L33_VDC POA75 130 2 2 CAS 6-115-EI-22_VDC 2440.0090 155 3 3 CAS 6-140-L33_VDC 2330.0090 155 2 2 CAS 6-140-EI-22_VDC 2950.00100 80 3 3 CAS 6-180-L33_VDC 2850.00100 180 2 2 CAS 6-180-EI-22_VDC 3210.00132 225 2 2 CAS 6-210-EI-22_VDC 3890.00150 258 2 2 CAS 6-250-EI-22_VDC 5130.00185 315 2 2 CAS 6-300-EI-22_VDC 5630.00250 425 2 2 CAS 6-420-EI-22_VDC 7010.00

Notes: 1) Add control voltage. 2) Other contact configurations are available, refer NHP. 3) Supplied fitted with standard N/O side mounting auxiliary contact. 4) Accessories need to be side or coil mounted, not top mounted.

Safety contactors CASDC operated

Safety contactorsQ DC controlQ 3 main contactsQ Positively guided contacts (mirror contacts) according to IEC 947Q Mechanically linked contactor and auxiliary contact block to IEC 947Q Protection against unintended actuationQ Auxiliary contacts are electronically compatible according to DIN 19240Q Auxiliary contact blocks cannot be removed 4)Q Above 23 amps, i.e. -14C version, standard N/O side-mounting auxiliary contact providedQ Reversible coil terminals for CAS 7 rangeQ Category B4 endorsement

CAS 7-9…23-05

CAS 7-9…23-14

CAS 7-30…85-04

Price Schedule CAS 7 ‘AA’Price Schedule CAS 6 ‘A1’

DC Controlled safety contactors CAS 6

1 - 20

1


1 Phase 50 Hz (kVar) 3 Phase 50 Hz (kVar)

No. of Aux.

Contacts

Cat. No. 1) 2) Price $230/ 240 V 400 V 415 V 500 V 690 V

230/ 240 V 400 V 415 V 500 V 690 V N/O N/C

5 8.5 9 10.5 15 8.5 15 15.5 18.5 25 1 1 CAQ 7-16-11_VAC 325.008 14 14.5 17.5 24 14 25 25 30 40 1 1 CAQ 7-37-11_VAC 520.00

DescriptionSprecher + Schuh CAQ 7 capacitor switching contactors are designed for switching high inrush currents. The unique design utilises front mounted resistor elements, which limit the severe high inrush currents seen in single or multiple capacitor banks. This allows for a more compact and economical design without the use of air-core reactors.


Capacitor switching contactorsCAQ 7

Product selection

Wiring diagrams

Q Compact sizeQ Limits high inrush currentsQ AC and DC coil controlQ Reversible coil terminalsQ Panel or 35 mm DIN rail mountingQ Environmentally friendly materialsQ 45 mm width

Ratings for switching capacitor banks @ 40 ºC

Ratings for switching capacitor banks @ 60 °C

CAQ 7-16-11/CAQ 7-37-11

Notes: 1) Uses common CA 7 auxiliary contact blocks. 2) Control voltage 240 V AC. Other voltages available on request. 3) A further 1 N/O + 1 N/C can be added by using auxiliary GH15S11. Maximum operational rates: CAQ 7-16...200 operations / hour. CAQ 7-37...100 operations / hour.

GH15RF3240VAC

1 Phase 50 Hz (kVar) 3 Phase 50 Hz (kVar)

No. of Aux.

Contacts

Cat. No. 1) 2) Price $230/ 240 V 400 V 415 V 500 V 690 V

230/ 240 V 400 V 415 V 500 V 690 V N/O N/C

5 8.5 9 10.5 15 8.5 15 15.5 18.5 25 1 1 CAQ 7-16-11_VAC 325.007 12.5 13 16 22 12.5 21.5 25 27 37.5 1 1 CAQ 7-37-11_VAC 520.00

GH15 typeQ 3 frame sizes 12.5 - 50 kVarQ High switching reliability Q Compact designQ Limit inrush currents

1 Phase 50-60 Hz (kVar)

3 Phase 50-60 Hz (kVar)

No. of Aux. Contacts 3)

Cat. No. 2) Price $230/ 240 V

300/ 415 V

230/ 240 V

380/ 415 V N/O N/C

7.5 12.5 7.5 15 1 1 GH15RF1240 VAC 295.0015 20 10 30 1 0 GH15RF3240 VAC 590.0025 30 15 50 1 0 GH15RF5240 VAC 1050.00

1 - 21

1


AccessoriesQ Mechanical interlock - BM3HQ Auxiliary contact blocks 1)


Contactors3 and 4 pole - with magnetic latch

AC ContactorsQ AC 1000 V rated for AC-1 or AC-3 applicationQ Standard control coil voltages 110 V, 240 V, 415 V AC/DCQ Main coil supply can be different to latch release coil supplyQ Not sensitive to any kind of voltage dropQ Inrush 350 VA, opening 100 VA

GH15-NT/PT/RT-ML...GH15-ST/TT-ML...

GH15-MN/NN/PN-ML...GH15-RN/SN/TN-ML...

GH9-PV-10/20/50

DC Switching contactorsType GHQ DC 310 V to 1000 V rating and DC-1/ DC-3/ DC-5 applicationsQ Standard control coil voltages 110 V, 240 V, 415 V AC/DCQ Inrush AC: 250 VA, hold 18 VAQ Inrush DC: 230 W, hold 4 W

AccessoriesQ Mechanical interlock - BM3HQ Auxiliary contact blocks 1)

Notes: 1) For auxiliary contact blocks refer to page 1 - 11. 2) Price for standard control voltages only. (110, 240, 415 V 50 Hz). 3) For dual voltage AC, DC or both add 20 % upon list price.

No hold-in power

Solar DC switching

GH6-DC-10/20/50

Main N/O poles

AC-1 Amps

AC-3 Amps 55 ºC

AC-3kW 415 V

Max. aux. contacts

Cat. No.

With std coil 2) 3)

above Price $N/O N/C

3 230 150 75 6 4 GH15NT-ML_V 2670.003 250 175 90 6 4 GH15PT-ML_V 3120.003 350 210 110 6 4 GH15RT-ML_V 3860.003 450 260 132 6 4 GH15ST-ML_V 4080.003 500 315 160 6 4 GH15TT-ML_V 5280.004 200 115 55 6 4 GH15MN-ML_V 2610.004 250 150 75 6 4 GH15NN-ML_V 3120.004 300 175 90 6 4 GH15PN-ML_V 3580.004 350 210 110 6 4 GH15RN-ML_V 5500.004 450 260 132 6 4 GH15SN-ML_V 7100.004 600 315 160 6 4 GH15TN-ML_V 9590.00

Main N/O poles

DC-1 Amps600 V

DC-1 Amps1000 V

DC-3/5 Amps310 V

DC-3/5600 V kW

DC-1 600 VkW

Max. Aux. contacts 1)

Cat. No. 2)

With standard

coil 2)Price $N/O N/C

1 100 - 90 25 60 6 4 GH6DC-10_V 1700.001 200 - 180 50 150 6 4 GH6DC-20_V 2950.001 500 - 450 90 300 6 4 GH6DC-50_V 5000.001 30 30 15 - 18 6 4 GH9PV-3_V 620.001 60 60 24 - 36 6 4 GH9PV-6_V 910.001 100 100 90 25 60 6 4 GH6PV-10_V 2090.001 250 250 200 50 150 6 4 GH9PV-20_V 3010.001 500 500 300 90 300 6 4 GH9PV-50_V 9140.00

GH9 PV3...6

1 - 22

1


For contactors CA 8...-10 Contact arrangement

N/O N/C Cat. No. Price $0 2 CA 8-P-02 47.501 1 CA 8-P-11 47.502 0 CA 8-P-20 47.500 4 CA 8-P-04 69.501 3 CA 8-P-13 69.503 1 CA 8-P-31 69.502 2 CA 8-P-22 69.504 0 CA 8-P-40 69.50

For contactors CA 8...-10 Contact arrangement

N/O N/C Cat. No. Price $0 2 CS 8-P-02E 47.501 1 CS 8-P-11E 47.502 0 CS 8-P-20E 47.500 4 CS 8-P-04E 69.501 3 CS 8-P-13E 69.503 1 CS 8-P-31Z 69.502 2 CS 8-P-22Z 69.504 0 CS 8-P-40E 69.50

Auxiliaries and accessoriesTo suit CA 8 contactors

Notes: 1) 17 volts, 5 mA>108 switchings per failure (to DIN 19240). 2) The contact selection is to comply with contact numbeirng sequence. 3) Add voltage to complete Cat. No.

Q Electronic compatible contacts 1) Q Simple and fast installation without tools

Price Schedule CA 8, CS 8 ‘A1’

Auxiliary contact blocks CA 8-P 2)

Description Cat. No. Price $

Mechanical interlock (requires no additional space) CM 8 20.40

Steel DIN rail 35 mm (2 metre lengths) SDR-2 29.40

On time-delay, solid state

0.1-3 sec (CA 8/CS 8 connection) CRZE 4-3S 199.00

1-30 sec (CA 8/CS 8 connection) CRZE 4-30S 240.00

Adaptor for mounting time delay relay onto G or DIN rail CR 4-P 6.80

RC link for coil suppression 24-48 V or 110-240 V 50 Hz or 380-480 V AC 50 Hz CRC 8-_ 3) 56.00

Diode link for coil suppression 12-250 V DC CRD 8-250 40.00

Metal Oxide Varistor (MOV) 12-55 V AC/12-77 V DC,

56-136 V AC/78-178 V DC and 137-277 V AC/181-350 V DC CRV 8-_ 3) 47.50

Connection links for DOL starters - KTA 3/KTA 7+CA 8

Connection links for reversing and star-delta starters @ 60 °C

Mechanical interlock CM 8

Mechanical interlock CM 8 (Shown fitted)

RC link CRC 8

Description Cat. No. Price $For use with KTA 7+CA 8 KT7-25S PEK12 12.40

Feeder terminal for compact bus bars (for use with CA 8-9 and 12) CA8-WT 48.50

3 phase compact bus bars - 3 connections

(for use with CA 8-9 and 12 contactors with 45 mm spacing)CA8-W453 48.50

3 phase compact bus bars - 4 connections

(for use with CA 8-9 and 12 contactors with 45 mm spacing)CA8-W454 48.50

Description Cat. No. Price $Reversing link set for CA 8-5/9 CAUT 8-PW 51.00

1 - 23

1


Price Schedule CA 7, CS 7 ‘AA’

AuxiliariesTo suit CA 7 contactors

Auxiliary contact4 pole top mount

Side mounting auxiliary contact blocks 1)

Auxiliary contact1 pole side mount

N/O 2) N/C 2) Diagram Position Suit CA 7 3) Cat. No. Price $

0 1 01 All CA 7-PA-01 56.00

1 0 10 All CA 7-PA-10 56.00

0 2 02 All CA 7-PA-02 67.00

1 1 11 All CA 7-PA-11 67.00

2 0 20 All CA 7-PA-20 67.00

1EM 1LB L11 All CA 7-PA-L11 68.00

22

2132

31

14

1344

43

12

11

22

2142 32

3141

14

13

22

2144 32

3143

14

13

24

2344 34

3343

18

17

26

2548 36

3547

Notes: 1) Aux contacts can be used on all CA 7 contactors. Suitability is determined by terminal numbering. 2) Maximum of 4 N/C contacts per contactor. N/O no restrictions. 3) Aux. contacts can be used on all CA 7 contactors. Suitability is determined by terminal numbering.

N/O 2) N/C 2) Diagram Position Suit CA 7 Cat. No. Price $

1 1 11 All CS 7-PV-11 55.50

0 2 02 All CS 7-PV-02 55.50

2 0 20 All CS 7-PV-20 55.50

1 1 S11 CA 7-9…23 CA 7-PV-S11 56.00

1 1 11 CA 7-30…97 CA 7-PV-11 56.00

0 2 02 CA 7-30…97 CA 7-PV-02 56.00

1EM 1LB L11 CA 7-30…97 CA 7-PV-L11 56.00

2 2 22 All CS 7-PV-22 78.00

2 2 22 CA 7-30…97 CA 7-PV-22 78.00

2 2 S22 CA 7-9…23 CA 7-PV-S22 78.00

1+1EM 1+1LB L22 All CS 7-PV-L22 78.00

3 1 31 All CS 7-PV-31 78.00

4 0 40 All CS 7-PV-40 78.00

0 4 04 All CS 7-PV-04 78.00

54

53

62

61

52

51

62

61

6454

6353

24

23

32

31

14

13

22

21

22

21

12

11

18

17 3547

3648 26

25

84

83

54

53

62

61

72

71

44

43

14

13

22

21

32

31

54

53

22

21

32

31

44

43

88

87

54

53

62

61

76

75

84

83

54

53

62

61

74

73

84

83

54

53

64

63

74

73

52

51

62

61

72

71

82

81

Top mounting auxiliary contact blocksTo suit CA 7 contactors

Auxiliary contact 2 pole top mount

1 - 24

1


Description Cat. No. Price $ On-delay 0.3-30 s CZE 7-30 270.00 On-delay 1.8-180 s CZE 7-180 280.00 Off-delay 0.3-30 s CZA 7-30 280.00 Off-delay 1.8-180 s CZA 7-180 290.00

68

67

56

55


Accessories - to suit CA 7/ CS 7Timers – mechanical interlocks

Electronic timer on-delay for in-line connection (clips onto CA 7 coil). Operating voltage 110…240 V 50/60 Hz, 110…250 V DC.

Electronic timer off-delay for in-line connection. (clips onto CA 7 coil). Operating voltage 110…240 V 50/60 Hz.

Electronic timer for star-delta starting. In-line connection clips onto main contactor. Operating voltage 110…240 V 50/60 Hz, 110…250 V DC. Changeover transition 90 ms.

Mechanical interlock for CA 7 contactors which can also be used between CA 7 of different ratings. Stand-ard version or version with integrated N/C contacts for electrical interlocking. Adds only 9 mm to width and includes connecting dovetail. Not suited for use with CA 7-40 & CA 7-90 4 pole contactors.

CZ pneumatic timer

Accessories for CA 7 contactors 1)

Notes: 1) Accessories are suitable for all CA 7 contactors. 240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038 : 2000.

CRZE 7 timer on-delay

CRZA 7 timer off-delay

CM 7-02 mechanical interlock with 2 x N/C contacts

CRZY 7-30 timer star delta

CA7-SF47

Time range 0.1…3 s CRZE 7-3 188.00

Time range 1…30 s CRZE 7-30 188.00

Time range 10…180 s CRZE 7-180 205.00

Time range 0.1…3 s CRZA 7-3 265.00

Time range 1…30 s CRZA 7-30 265.00

Time range 10…180 s CRZA 7-180 280.00

Time range 1…30 s CRZY 7-30 280.00

CA7-SF47modules meet the semi

47 voltage sag immunity

requirement to 50% voltage for 200 mS.

For CA 7/CS 7DC controlled devices

CA 7/CS 7Control voltage Cat. No. Price $

24-250 V DC 24-250 V AC CA7-SF47 270.00

110-250 V DC 110-250 V AC CA7-SF47A (1-30 Sec) 360.00

Interlock only CM 7 62.00

Interlock with 2 x N/C contacts CM 7-02 97.0022

21

22

21

Pneumatic timer

Pneumatic timer66

65

58

57

1 - 25

1


CA 7-S dovetail adaptor

Accessories - To suit CA 7/ CS 7Latch – interface – suppressor


CV 7 mechanical latch

CRI 7E interface

CRC 7 suppressor module

Accessories for CA 7 contactors 1)

Notes: 1) Accessories are suitable for all CA 7 contactors. 240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038 : 2000.

PLCinterface

available

for 18 to

48 V DC

Function/Description Cat. No. Price $

Mechanical latch clips onto the top of CA 7 contactors. Latch includes N/O

and N/C contact and the suggested circuit shows on and off button with

interlock circuit. The contactor stays latched ‘on’ until electrically released

by the stop button. (latching ‘on’ without coil power).

Volts AC Volts DC

24 V 50/60 Hz 12 V DC CV7-11-24VA 270.00

48 V 50/60 Hz 24 V DC CV7-11-48VA 270.00

110 V 50/60 Hz 48 V DC CV7-11-110VA 270.00

230-240 V 50 Hz 110 V DC CV7-11-240VA 270.00

400 V 50/60 Hz 220 V DC CV7-11-400VA 270.00

Interface (electronic) clips onto CA 7 coil and is ideal for PLC interface

having 18...30 V DC (10 mA...15 mA) input. 200 V AC switching capacity.

Suitable for coil voltage 110...240 V AC and includes in-built suppressor

and LED status indicator.CRI 7E 171.00

CRI 7E-48M 171.00

Suppressor module R-C (resistor capacitor) for limiting switching overvoltages of the coil circuit. Clips onto all CA 7 contactor coils.

Coil voltage range 24...48 V 50/60 Hz CRC 7-48 77.00Coil voltage range 110...280 V 50/60 Hz CRC 7-280 77.00Coil voltage range 380...480 V 50/60 Hz CRC 7-480 77.00

Suppressor module - varistor for limiting switching overvoltages

of the coil circuit (surge protection).

Clips onto CA 7 contactors for AC or DC coil circuits.

Coil voltage 12...55 V AC, 12...77 V DC CRV 7-55 82.00Coil voltage 56...136 V AC, 78...180 V DC CRV 7-136 82.00Coil voltage 137...277 V AC, 181...350 V DC CRV 7-277 82.00Coil voltage 278...575 V AC CRV 7-575 82.00

Diode suppressor for DC coils 12…250 V DC CRD 7-250V 62.00

Dovetail adaptors

For joining contactor assemblies together in reversing/star-delta

or similar contactor combinations.

0 mm spacing CA 7-S0 4.709 mm spacing CA 7-S9 6.80

A0 E2 E1

+–L

N

A2

A1L

A1E1

E1

E2

A1

A2

14

13

K1R

L1~/L+

N~/L-

K1M

58

57

66

65K1R

0

I

K1M

Interface module suitable for 32…48 V DC

1 - 26

1


Cat. No.CA7-P-KN23/P-KL23 CA7-P-K37 CA7-P-K43 CA7-P-K85 CA7-P-B23 CA7-P-B37

Terminal type B7 B7 B9 B11 B11 B11

Fine stranded with ferrule (mm2) 4…16 4…16 6…35 10…70 10…70 10…70

Coarse stranded / solid (mm2) 4…25 4…25 6…35 10…70 10…70 10…70

Tightening torque (Nm) 2…3 2…3 3…6 8…12 6…12 6…12

Tightening torque (lb-in) 18…27 18…27 27…54 72…108 54…108 54…108

Wire size IEC 60947-1

Terminal specifications

Description To suit

Max. AC 1 current rating IEC

Cat. No. Price $@ 40ºC @ 60ºC

3 pole terminal links

CA 7 - 9…23 45 A 45 A (line side) CA 7-P-KN23 68.00 (load side) CA 7-P-KL23 68.00

CA 7 - 30…37 60 A 55 A CA 7-P-K37 77.001 pole terminal links

CA 7 - 43 90 A 75 A CA 7-P-K43 34.00CA 7 - 60…97 130 A 130 A CA 7-P-K85 68.50

Description To suit

Max. AC 1 current rating IEC

Cat. No. Price $@ 40ºC @ 60ºC3 pole bridginglinks

CA 7 - 9…23 100 A 100 A CA 7-P-B23 67.00CA 7 - 30…37 150 A 135 A CA 7-P-B37 77.00


Accessories - To suit CA 7Terminal, bridging and connecting links CA 7

Terminal links

Bridging links

General featuresQ Terminal links allow for larger wires to be used with CA 7 contactorsQ Enable external connections to be made without disturbing existing power wiringQ Ideal for star-delta, reversing and multi-speed contactors and startersQ Bridging links enable the use of smaller contactors on resistive loadsQ IP 2LX finger protection

DescriptionCA 7 terminal links and bridging links provide greater flexibility for the CA 7 range. The terminal links allow for larger conductors to be used on standard CA 7 contactors. This eliminates the need for power distribu-tion blocks on certain star-delta starter applications or where long cable runs make the use of larger cables necessary to reduce voltage drop. In addition, the use of larger wires can increase the AC 1 current rating of the contactor.The bridging links enable smaller CA 7 contactors to be used on single-phase resistive applications. By paralleling the three power poles, the contacts see only a portion of the actual load.

CA 7-P-K37

CA 7-P-KL23

CA 7-P-B23

CA 7-P-K43

1 - 27

1


Function/Description To suit Cat. No.Nett 1)Price $

Coil extension used to raise height of coil connections

CA 7-9...23 KT 7-25S-PSC23 16.00CA 7-30...43 KT 7-45H-PSC43 16.20

Longer links allow the use of coil extension between components

KT 7-25S to CA 7-9…23 KT 7-25S-PNC23 15.80KT 7-25H to CA 7-9…23 KT 7-25H-PNC23 15.80KT 7-45H to CA 7-30…37 KT 7-45H-PNC37 16.80KT 7-45H to CA 7-43 KT 7-45H-PNC43 20.40

Kits of both coil extensions and links

KT 7-25S to CA 7-9…23 KT 7-25S-PKC23 31.50KT 7-25H to CA 7-9…23 KT 7-25H-PKC23 30.50KT 7-45H to CA 7-30…37 KT 7-45H-PKC37 35.00KT 7-45H to CA 7-43 KT 7-45H-PKC43 39.50

Function/Description To suit Cat. No.Nett 1)Price $

Reversing starter wiring set, can be used in conjunction with KTA 3-25 and KTA 7 wiring links

CA 7-9...23 CAUT 7-PW23 17.00CA 7-30...37 CAUT 7-PW37 22.80CA 7-43 CAUT 7-PW43 26.20CA 7-60…97 CAUT 7-PW85 90.50

Star-delta wiring set for use with KTA 3-25 and KTA 7 wiring link. Includes star point connection

CA 7-9...23 CAYT 7-PW23 24.80CA 7-30...37 CAYT 7-PW37 29.60CA 7-43 CAYT 7-PW43 31.50

Cover for contactor to prevent manual operation CA 7-9…97 CA 7-SCCA 17.00Cover for auxiliary contact CA 7-P/CS 7-P CA 7-SCFA 9.90

Wiring links for KT 7 to CA 7 contactors DOL Cat. No.Nett 1) Price $

For use with KT 7-25S & CA 7-9…23 KT 7-25S-PEC23 13.60For use with KT 7-25H & CA 7-9…23 KT 7-25H-PEC23 15.40

Function/Description Cat. No. Price $Tag sticker for CA 7 (pkt 100) CA 7-FMS 10.20Tag labels for CA 7 (pkt 100) CA 7-FMP 10.20Tag covers for CA 7 (pkt 100) CA 7-FMC 90.50

3 component starter accessories - coil extensions and longer connecting links

KT 7-25S-PKC23

Accessories - To suit CA 7Wiring sets

Price Schedule ‘AA’KT 7 Accessories = ‘Nett’

CAUT 7-PW23

CAYT 7-PW23

Notes: 1) Nett prices.

CA 7 SCCA andCA 7 FMC

KT 7-25H-PEC23

1 - 28

1


Description Contacts 2) Position Diagram Cat. No. Price $For fitting inside(replaces CA6-P1-11 & CA 6-P2-11)

N/O + N/C 1+2 CA 6-S1-11 118.00

For fitting outside(replaces CA6-P3-11 & CA 6-P4-11)

N/O + N/C 3+4 CA 6-S2-11 118.00

For fitting inside(replaces CA6-P1-11 & CA 6-P2-11)

2 N/O 2+1 CA 6-S1-20 122.00

For fitting outside(replaces CA6-P4-11) 2 N/O 4+3 CA 6-S2-20 122.00

For fitting inside(replaces CA6-P2-L11)

N/O + N/C

(late break)1+2 CA 6-S1-L11 3) 122.00

13

14

21

22

4443

3231

5384

5483

6172

6271

1344

1443 2433

2334

8354

8353 6473

6374

1344

1443 2635

2536

AuxiliariesTo suit CA 6, CA 5 contactors

Description Cat. No. Price $

2 N/O + 2 N/C aux. block to suit CA 5-370/450/550/700/860 CA 5-EF-22 4) 350.00

11-12 and 23-24 to suit CA 5-1000/1200 CA 5-EB-11 350.00

Auxiliary contact blocks for CA 5-450 - CA 5-1200

Positioning of auxiliary contacts

Notes: 1) Maximum of four blocks per contactor. One CA 6-S1-11 block provided standard on each CA 6. 2) Refer diagram this page. 3) To be used with DC coil. 4) Adjustable type.

Note: Position one (CA 6-S1-11) fitted as standard on CA 6 contactors.

CA 5-EB-11

CA 6- S1-B11

CA 5-EF-22

Note: New and previous range auxiliaries are compatible and interchangeable

Auxiliary contact blocks for CA 6 1)

3 1 CA 6 2 4

CA6-S1-11

CA6-S2-11

(inside positions)

(outside positions)

Auxiliary contact blocks for CA 6 (low current and low voltage)

AC 1 - 250 V 0.1 AAC 15/DC 13-min 3…125 V 1…100 mAElectronic compatible contactsDescription Contacts 2) Position Diagram Cat. No. Price $

For fitting inside(replaces CA6-P2-B11 & CA 6-P3-B11)

1 C/O 1 CA 6-S1-B11 193.006434 6232

61

CA 6- S2-11

Price Schedule ‘AA’Except CA 5 Aux. ‘A2’

1 - 29

1


Mechanical interlocks

Plug-in suppressors

Notes: 1) AC: 24 V, 48 V, 110 V, 240 V, 415 V, DC: 24 V, 48 V, 120 V, 220 V.

Above EI coils fitted with surge suppression circuit/module. Other voltages require plug-in suppressor. 2) Supplied as standard to 24 V 50 Hz and 24 V DC EI coils. 3) Supplied as standard to 48 V 50 Hz EI coils. 4) Supplied as standard to 415 V 50 Hz EI coils. 5) Includes 2 N/C auxiliary contacts.

CM 6-D00

CRC 6

CA 6-HB

CA 6 - TC180

AccessoriesTo suit CA 6 contactors


Description Cat. No. Price $Mechanical interlock for CA 6-115(-EI)…CA 6-860-EI (Replaces CM 6) CM 6-D00 151.00Mechanical interlock to interlock CA 7-9…97 to CA 6-95…860 CM 6-C00 171.00Mechanical/Electrical interlock to suit CA 6-95(-EI)…CA 6-860-EI 5) CM 6-D02 171.00Mechanical/Electrical interlock to suit CA 7-9…97 to CA 6-115…860 5) CM 6-C02 171.00

R-C suppressor to suit CA 6 with conventional coil Cat. No. Price $21 – 48 V 50 Hz CRC 6-48 77.0095 – 110 V 50 Hz CRC 6-110 77.00190 – 240 V 50 Hz CRC 6-240 77.00380 – 550 V 50 Hz CRC 6-550 77.00

Varistor for surge suppression to suit CA 6 conventional coil Cat. No. Price $12 – 55 V 50 Hz CRV 6-55 57.0056 – 136 V 50 Hz CRV 6-136 57.00137 – 277 V 50 Hz CRV 6-277 57.00278 – 575 V 50 Hz CRV 6-575 57.00

Varistor for surge suppression to suit CA 6 electronic coil 1) Cat. No. Price $24 – 28 V AC/DC CRV 6-40 2) 57.0048 – 72 V DC CRV 6-72 57.0043 – 65 V 50 Hz CRV 6-75 3) 57.00208 – 277 V 50 Hz (overvoltage category IV) CRV 6-550 57.00380 – 400 V 50 Hz CRV 6-460 4) 57.00

Terminal covers (for line or load side) Cat. No. Price $Main terminal cover IP 20 to suit CA 6-95(-EI)…180(-EI) – Qty.: 1 CA 6-TC180 110.00Main terminal cover IP 20 to suit CA 6-210-EI…420-EI – Qty.: 1 CA 6-TC420 159.00Main terminal cover IP 20 to suit CA 6-630-EI…860-EI – Qty.: 1 CA 6-TC860 225.00

Terminal blocks (set of 2) – IP 20 protection to IEC60529 Cat. No. Price $Terminal block – 3-pole for CA 6-115(-EI) 1) and CA 6-140-(EI)…CA 6-180(-EI) CA 6-HB2 235.00

Terminal block – 3-pole for CA 6-210-EI…CA 6-420-EI CA 6-HB3 520.00

1 - 30

1


AccessoriesTo suit CA 6 contactors

CA 6-180-VLHB

Price ScheduleCA 6 Accessories = ‘Nett’CWE 4 = ‘A2’ Notes:

1) Nett price only.

Busbar sets - for direct connection of CA 6 to CET 5 (CWE 4-180)To Suit Cat. No. Price $CA 6-115-EI…CA 6-180-EI; CA 6-140-11 CWE 4-VS2 225.00

Phase barriersDescription To suit Cat. No. Price $Phase barrier (set of 4) CA 6-630…860 CA 6-DPB860 POA

Connection links rated to 1000 V Cat. No.Nett

Price $ 1)

Flat conductor set input for reversing/star delta with CA 6-115(-EI) to CA 6-180(-EI) - 50 mm2 CA 6-180-VL 250.00

Flat conductor set output for reversing with CA 6-115(-EI) to CA 6-180(-EI) - 50 mm2 CA 6-180-VT 240.00

Star point shorting bar CA 6-115(-EI)…CA 6-180(-EI) CA 6-180-VYU 24.80Flat conductor set input for reversing/star delta with CA 6-210-EI to CA 6-420-EI - 120 mm2 CA 6-420-VL 420.00

Flat conductor set output for reversing with CA 6-210-EI to CA 6-420-EI - 120 mm2 CA 6-420-VT 420.00

Star point shorting bar CA 6-210-EI…CA 6-420-EI CA 6-420-VYU 56.50Flat conductor set input for reversing/star delta with CA 6-630-EI to CA 6-860-EI - 350 mm2 CA 6-860-VL 490.00

Flat conductor set output for reversing with CA 6-630-EI to CA 6-860EI - 350 mm2 CA 6-860-VT 410.00

Star point shorting bar CA 6-630-EI and CA 6-860-EI CA 6-860-VYU 56.50Flat conductor set input for reversing/star delta for CA 6-115(-EI) to CA 6-180(-EI) with CA 6-HB1 or CA 6-HB2 CA 6-180-VLHB 225.00

Flat conductor set output for reversing with CA 6-115(-EI) to CA 6-180(-EI) with CA 6-HB2 CA 6-180-VTHB 245.00

Flat conductor set input for reversing/star delta with CA 6-210-EI to CA 6-420-EI with CA 6-HB3 CA 6-420-VLHB 420.00

Flat conductor set output for reversing with CA 6-210-EI to CA 6-420-EI with CA 6-HB3 CA 6-420-VTHB 420.00

Flat conductor set for star-delta for connecting delta contactor to star contactor [CA 6-115(-EI)…CA 6-180(-EI)] using CA6-HB terminal blocks CA 6-420-VYHB 420.00

1 - 31

1


AccessoriesTo suit CA 5 and GH55-84 contactors


Terminal covers (IP 20)

Notes: 1) Latches are factory fitted. Refer NHP. 2) Fitted by customer after contactors are mounted. 240/415 V rated coils are suitable for use in 230/400 V in accordance with AS 60038 : 2000.

Mechanical interlocks(horizontal) for CA 5 contactors 2)

CA 5-AM5

CA 5-PR55

To suit contactor Cat. No. Price $CA 5-450 GH55 CA 5-PR55 340.00CA 5-550 GH57 CA 5-PR57 365.00CA 5-700 GH62 CA 5-PR62 400.00CA 5-860 GH64 CA 5-PR64 425.00

To suit contactor Cat. No. Price $CA 5-450/550 GH55/57 CA 5-BM5H 460.00CA 5-700/860 GH62/64 CA 5-BM6H 910.00CA 5-450/860 GH55/7-62/4 CA 5-BM56H 590.00CA 5-1000/1200 GH76/78 CA 5-BM7H 1190.00

Mechanical interlock (vertical)To suit contactors Cat. No. Price $CA5 GH55_57_62_64_76_78 CA 5-BM56V 590.00

CA 5-BM56H

Mechanical latches 1)

Typical latch to suitGH contactors

CA5-AM6

To suit contactor Control type

Pick-up power of release magnet

Cat. No. Price $AC(VA) DC(W)

GH55-57 &CA 5-450/550 Pushbutton 950 500 CA 5-AM5 1390.00

GH62-64 & CA 5-700/860 Pushbutton 1600 800 CA 5-AM6 1790.00

Spare AC or DC coil for AM5/AM6 latch CVC 5...V 270.00CA 5-BM56V

1 - 32

1


To suit Cat. No. 1) Price $

Spare coils for contactors (AC)

CA 7-9...CA 7-16 CAC 7-16_V AC 68.50CA 7-23...CA 7-37 CAC 7-37_V AC 102.00CA 7-43 CAC 7-43_V AC 114.00CA 7-60...CA 7-85 CAC 7-85_V AC 151.00CA 7-97 CAC 7-97_V AC 160.00

Spare EI coils for contactors (DC)

CA 7-9C…CA 7-16C CAC 7-16_V DC 137.00CA 7-23C…CA 7-37C CAC 7-37_V DC 210.00CA 7-43C CAC 7-43_V DC 340.00CA 7-60C…CA 7-85C CAC 7-85_V DC 430.00CA 7-60...CA 7-85 CAC 7-97_V DC 440.00

To suit Cat. No. 1) Price $

Spare coil (AC)CA 8-5 … CA 8-12 CAC8_VAC 85.50CS 8 CAC8_VAC 85.50

Spare coil (DC)CA 8-5C … CA 8-12C CAC8_VDC 85.50CS 8C CAC8_VDC 85.50

Spare coil (DC) with diodeCA 8-5C … CA 8-12C CAC8_VDC 85.50CS 8C CAC8_VDC 85.50

Spare CA 7 coil

Spare coils for CA 8 contactors and relays (CS 8)

Spare parts – CoilsTo suit CA 8, CA 7, CA 6 contactors

Notes: 1) Standard voltages for spare coils AC 12, 24, 32, 48, 110, 240, 415, 480 V 50 Hz. For special voltages - contact NHP. Standard voltages for spare coils DC 12, 24, 48, 110, 220, 240 V DC. 2) Conventional coil standard AC voltages: 24, 110, 240, 415 V. Electronic ‘-EI’ coil standard AC voltages: 24 (only up to CA6-250), 48, 110, 240, 415 V. Conventional coil and electronic ‘-EI’ coil standard DC voltages: 24, 48, 110, 220 V (only up to CA 6-300). For coil voltages other than those listed above, contact NHP. 240/415 V rated coils are suitable for use in 230/400 V in accordance with AS 60038: 2000.

Spare CA 8 coil


Spare coils for CA 7 contactors

CAC 6-300-EI

To suit contactor Cat. No. 2)

Std. Voltage Price $

Non-std. Voltage Price $

CA 6-95-11…CA 6-180-11 (Conventional coil) CAC 6-180_V DC 240.00 340.00CA 6-95-EI…CA 6-300-EI CAC 6-300-EI_V DC 960.00 960.00CA 6-420-EI CAC 6-420-EI_V DC 1290.00 1290.00CA 6-630-EI & CA 6-860-EI CAC 6-860-EI…V DC 1870.00 1870.00

Spare DC coils for CA 6 contactors

To suit contactor Cat. No. 2)

Std. Voltage Price $

Non-std. Voltage Price $

CA 6-95-11…CA 6-180-11 (Conventional coil) CAC 6-180_V AC 240.00 305.00CA 6-95-EI…CA 6-300-EI CAC 6-300-EI_V AC 960.00 960.00CA 6-420-EI CAC 6-420-EI_V AC 1290.00 1290.00CA 6-630-EI & CA 6-860-EI CAC 6-860-EI_V AC 1870.00 1870.00

Spare AC coils for CA 6 contactors

1 - 33

1


Spare partsTo suit CA 6 contactors


CA 6-AE250

Fixed and moving contacts

Arc chambersTo suit contactor Cat. No. Price $CA 6-115-11 CA 6-A115 190.00CA 6-115-EI CA 6-AE115 190.00CA 6-140-11 CA 6-A140 255.00CA 6-140-EI CA 6-AE140 265.00CA 6-180-11 CA 6-A180 270.00CA 6-180-EI CA 6-AE180 270.00CA 6-210-EI CA 6-AE210 570.00CA 6-250-EI CA 6-AE250 570.00CA 6-300-EI CA 6-AE300 570.00CA 6-420-EI CA 6-AE420 570.00CA 6-630-EI CA 6-AE630 2460.00CA 6-860-EI CA 6-AE860 3210.00

Main contacts – replacements (set of 3 poles)To suit contactor Contact set ID number Cat. No. Price $CA 6-115-11 2 CA 6-C115 610.00CA 6-115-EI 22 CA 6-CE115 610.00CA 6-140-11 33 CA 6-C140 650.00CA 6-140-EI 3 CA 6-CE140 650.00CA 6-180-11 44 CA 6-C180 650.00CA 6-180-EI 4 CA 6-CE180 650.00CA 6-210-EI 5 CA 6-CE210 1090.00CA 6-250-EI 6 CA 6-CE250 1380.00CA 6-300-EI 7 CA 6-CE300 1580.00CA 6-420-EI 8 CA 6-CE420 1810.00CA 6-630-EI (includes arc chamber) Pending CA 6-CE630 5540.00CA 6-860-EI (includes arc chamber) Pending CA 6-CE860 7440.00

1 - 34

1


Arc chambers

To suit contactor Cat. No.Per each

Price $CA 5-450/550 1) GH55/57 CA 5-PF-450/550 750.00CA 5-700/860 1) GH62/64 CA 5-PF-700/860 850.00CA 5-1000/1200 2) GH76/78 CA 5-PF-1000/1200 750.00

Feeder group CA 5-FG51

Spare partsTo suit CA 5 contactors, GH contactors

Notes: 1) 3 pole arc chamber. 2) Three per contactor required. Price per item. 3) 2 coils per contactor - priced per set of two. Change of coil voltage requires change of feeder group. 4) Contactors CA 5-450/860 are AC or DC operated standard voltages:- 110/120 V AC=100/110 V DC. 415 V AC=345/380 V DC. 220/240 V AC=200/220 V DC. 440/480 V AC=400/440 V DC. 5) Non-standard voltages, POA. 6) When changing to a different feeder group voltage, change coil to suit this voltage. 240/415 V rated coils are suitable for use in 230/400 V in accordance with AS 60038 : 2000.

CA 5-PF-700/860

CAC 5-550…VA

To suit contactor Cat. No.Per pole Price $

CA 5-450 GH55 CA 5-CP-GH55 1170.00CA 5-550 GH57 CA 5-CP-GH57 1440.00CA 5-700 GH62 CA 5-CP-GH62 1790.00CA 5-860 GH64 CA 5-CP-GH64 2360.00CA 5-1000 GH76 CA 5-CP-GH76 3090.00CA 5-1200 GH78 CA 5-CP-GH78 4020.00

Main contacts - replacements per pole 2)

To suit contactor Cat. No. Price $CA 5-450/550 GH55/57 CA5-FG51-110 V AC 1050.00CA 5-450/550 GH55/57 CA5-FG51-240 V AC 1050.00CA 5-450/550 GH55/57 CA5-FG51-415 V AC 1050.00CA 5-700/860 GH62/64 CA5-FG61-110 V AC 1580.00CA 5-700/860 GH62/64 CA5-FG61-240 V AC 1580.00CA 5-700/860 GH62/64 CA5-FG61-415 V AC 1580.00CA 5-700/860 GH62/64 CA5-FG61-440 V AC 1580.00CA 5-1000/1200 GH76/78 CA5-FG78-110 V AC 2900.00CA 5-1000/1200 GH76/78 CA5-FG78-240 V AC 2900.00CA 5-1000/1200 GH76/78 CA5-FG78-415 V AC 2900.00CA 5-1000/1200 GH76/78 CA5-FG78-440 V AC 2900.00

Spare AC coils 3) 4) 5)To suit contactor Cat. No.

Std. voltagePrice $

CA 5-450/CA 5-550 GH55/57 CAC 5-550_V AC 850.00CA 5-700/860 GH62/64 CAC 5-860_V AC 1500.00CA 5-1000/1200 GH76/78 CAC 5-1200_V AC 2440.00

Feeder groups 4) 6)


1 - 35

1



AC contactorsType GH - spares

To suit contactorCoil Cat. No. 1)

AC coilstandardvoltagePrice $

DC coilstandardvoltagePrice $

GH15 BN/EN GHC15-01_V 3) 73.50 170.00GH15 GN/JN/KT/LT/HN/FN GHC15-02_V 3) 101.00 187.00GH15 M/N/P (electronic coil) GHC15PN_V 590.00 590.00GH15 LN (electronic coil) GHC15LN_V 330.00 330.00

Spare operating coils 2)

AC 1 categoryContactor GH15NT, NN GH15PT, PN

Operational current (Ue ≤ 690 V)le AC 1 amb T ≤ 40 °C (A) 200 250le AC 1 amb T ≤ 55 °C (A) 170 210

Maximum operating power for 3 phase loads (kW) (ambient T ≤ 40 °C)

kW @

230 V 79 99400 V 138 173440 V 152 190500 V 173 216690 V 239 2981000 V 276 346

Connections (mm2) 95 120

AC 3 and AC 4 categoryContactor GH15NT GH15PT

Rated operational current AC 3 le (A) Ue ≤ 440 V 150 175

230 V 40 50

3 phase motor rated operational power AC 3 (kW)

kW @

400 V 75 90415 V 80 95440 V 85 100500 V 90 110690 V 90 1101000 V 55 75

Rated operational current AC 4 le (A) 400 V 55 63

Coil consumption for GH contactors

ContactorGH15 BN/EN

GH15 BN/EN

GH15 KT/LT

GH15 M/N/P

CA5 450/550GH55/57

CA5 700/860 GH62/64

CA5 1000/1200 GH76/78

Pick-up VA 80-100 250 250/260 350 950 1700 2500Hold VA 9-12 18 18 5 11 25 75

Notes: 1) Add control voltage to Cat. No. when ordering. 2) For non-standard coils (POA). 3) GHC15-01 is frame size 1. GHC15-02 is frame size 2. 240/415 V rated coils are suitable for use on 230/400 V in accordance with AS 60038 : 2000.

1 - 36

1


Contactor communication auxiliaryType CCA 1)

Price Schedule

‘A4’

Enclosed starter incorporating DeviceNet™

CCA

Notes: 1) On-site commissioning and application support (field service).

C C A - D N Y 4 2 R

Contactor communication auxiliary DeviceNet™

2 = 2 In / 1 Out4 = 4 In / 2 Out

1 = 110 V AC input2 = 24 V DC input

R = Relay

FeaturesQ DeviceNet™ communication for startersQ 22.5 mm wide caseQ DIN rail mounting or dovetail to CA 7 contactorsQ Choice of I/O options Q LED status indication for inputs and outputsQ Auto baud detection (No DIP switches)

The CCA is a compact 22.5 mm wide starter accessory. It can be mounted separately on DIN rail, screw fixing or dovetail mounted onto the side of a CA 7 contactor. Although the starter auxiliary is designed for use with motor starting it can be used as a communication node (via DeviceNet™) for any application needing input/output monitoring.A typical application would be for a standard DOL starter. The ‘1’ output device would be used to switch the contactor coil circuit. The two inputs could be used to check the overload and contactor status. The ‘2’ output device could be used for reversing starter applications or two DOLs controlled from the same node. Alternatively it could be used in a single starter situation where more inputs/outputs are required.

'Networkable' solutions for starter control

Catalogue Number construction

DeviceNet™starter auxiliary CCA

Inputs Voltage Outputs Type Cat. No. Price $4 110 V AC 2 Relay CCA-DNY41R 870.004 24 V DC 2 Relay CCA-DNY42R 900.00

1 - 37

1



Mounting railFor rail mounting of various DIN style equipment

DIN 35 mm mounting rail

NDRA-35

NDSR-35

Combination mounting rail NHP - aluminium

Notes: 1) Mounting rails are supplied as standard, in the lengths shown.

Description Standard length 1) Cat. No. Price $

Aluminium

1 metre length NDRA-35-1 15.602 metre length NDRA-35-2 30.503 metre length NDRA-35-3 45.50

Steel per 2m length SDR-2 29.40

Description Standard length 1) Cat. No. Price $Combines slide rail andDIN 35 mm rail

3 metre length NDSR-35-3 82.00

1. Download

In order to scan one of the QR Codes you need to download a QR Code reader app to your smartphone. Try simply searching ‘QR Code’ in your app store.

2. Scan

Open your QR Code reader app and point the device’s camera at the relevant QR code.

3. View

Once scanned the QR Code will automatically open the relevant location.

HO

W TO

ACTIVATE YOU

R QR CO

DES

WWEBQR CODE

With NHP’s Price Lists available for download online, you can now access product information anytime, anywhere!

Scan the QR code below or go to www.nhp.com.au to download the latest NHP catalogues and price lists.

34

VictoriaRichmondLavertonDandenongAlbury / Wodonga

TasmaniaHobartLaunceston

New South WalesSydneyNewcastleCanberraWollongong

Western AustraliaPerth

Northern TerritoryDarwin

QueenslandBrisbaneTownsvilleRockhamptonToowoombaCairns

South AustraliaAdelaide

1 Ballarat2 Bendigo 3 Geelong4 Shepparton5 Gippsland 6 Mildura7 Whyalla8 Mt Gambier9 Kalgoorlie10 Bunbury11 Karratha12 Port Hedland

13 Mackay14 Gladstone15 Sunshine Coast16 Gold Coast17 Griffith18 Wagga Wagga19 Dubbo20 Gosford21 Coffs Harbour22 Tamworth23 Lithgow

North IslandAucklandHamiltonNapierWellington New Plymouth

South IslandChristchurch Dunedin

24 Bay of Plenty

Cairns

Townsville

Rockhampton

Brisbane

NewcastleSydney

Wollongong

Auckland

Hamilton

LauncestonDandenongLaverton

12

3 5

67

13

14

15

16

17

18

19

20

2122

23

24

8

9

10

11 12

Adelaide

NHP Branch OfficesNHP Resident Sales Staff

Perth

Darwin

Melbourne

AlburyCanberra

Hobart

Napier

Wellington

Christchurch

Dunedin

Toowoomba

4

New Plymouth

Australian Branches

New Zealand Branches

Australian Regional Representation

New Zealand Regional Representation

NHP Electrical Engineering Products Pty LtdA.B.N. 84 004 304 812

NPLISTAC © Copyright NHP 2013

Cert no. XXX-XXX-XXX X

Please scan the QR code to download this document.

AUSTRALIAnhp.com.au

SALES 1300 NHP NHP

VICTORIAMelbourne 43-67 River Street Richmond VIC 3121 Tel +61 3 9429 2999

Laverton 104-106 William Angliss Drive Laverton North VIC 3026 Tel +61 3 9368 2901

Albury / Wodonga 847 Ramsden Drive Albury NSW 2640 Tel +61 2 6049 0600 Dandenong 40-42 Cyber Loop Dandenong South VIC 3175 Tel +61 3 8773 6400

TASMANIA

Hobart 29B Lampton Avenue Derwent Park TAS 7009 Tel +61 3 6228 9575 Launceston Unit 3 13-17 Merino Street Kings Meadows TAS 7249 Tel +61 3 6345 2600

NEW SOUTH WALESSydney 30-34 Day Street North Silverwater NSW 2128 Tel +61 2 9748 3444

Newcastle 575 Maitland Road Mayfield West NSW 2304 Tel +61 2 4960 2220 Wollongong 34 Industrial Road Unanderra NSW 2526 Tel +61 2 4272 5763

ACT

Canberra Unit 1 187 Gladstone Street Fyshwick ACT 2609 Tel +61 2 6280 9888

WESTERN AUSTRALIA

Perth 38 Belmont Ave Rivervale WA 6103 Tel +61 8 9277 1777

NORTHERN TERRITORYDarwin 3 Steele Street Winnellie NT 0820 Tel +61 8 8947 2666

QUEENSLANDBrisbane 16 Riverview Place Murarrie QLD 4172 Tel +61 7 3909 4999 Townsville 5 Leyland Street Garbutt QLD 4814 Tel +61 7 4779 0700 Rockhampton 1 Lawson Street Parkhurst QLD 4702 Tel +61 7 4927 2277 Toowoomba Cnr Carroll Street and Struan Court QLD 4350 Tel +61 7 4634 4799 Cairns Unit 2 1 Bramp Close Portsmith QLD 4870 Tel +61 7 4035 6888

SOUTH AUSTRALIA

Adelaide 36-38 Croydon Road Keswick SA 5035 Tel +61 8 8297 9055

NEW ZEALANDnhp-nz.com

SALES 0800 NHP NHP

PO Box 62-009 Sylvia Park Auckland 1644 New Zealand

Auckland 118a Carbine Road Mt Wellington 1060 Tel +64 9 276 1967

Hamilton 78 Rostrevor Street Hamilton 3204 Tel +64 7 849 0257 Napier 126 Taradale Road Onekawa 4110 Tel +64 6 843 6928 New Plymouth 2 Dean Place Waiwhakaiho 4312 Tel 0800 NHP NHP Wellington 52 Victoria Street Lower Hutt 5010 Tel +64 4 570 0634 Christchurch 27 Iversen Terrace Waltham 8011 Tel +64 3 377 4407 Dunedin 30 Fox Street South Dunedin 9012 Tel 0800 NHP NHP

Documents

Contactors, auxiliaries, accessories and spare parts · 1 Contactors, auxiliaries, accessories and spare parts 1 - 1 CONTACTOR COMMUNICATION AUXILIARY ... AC contactors 4 pole open