Contactless Kernel C-2 Implementation …...Notice: This ICS form must be completed for products implementing the Kernel C-2 submitted to receive EMVCo Contactless Product testing

V151216_1 Copyright ©2017 EMVCo, LLC. All rights reserved. Page 1 of 6 ICS Contactless Kernel C-2 – version 2.6a

Contactless Kernel C-2 Implementation Conformance

Statement Version 2.6a

ICS Reference Number and Validity Period (for EMVCo administrative use only)

ICS Reference Number:

Valid from:

Valid to:

Notice: This ICS form must be completed for products implementing the Kernel C-2 submitted to receive EMVCo Contactless Product testing and compliance/approval. ICS form must be completed in its entirety and provided along with the corresponding “ICS - Contactless Product”.

Part I - Administrative Product Provider Identification M Company Legal Name:

(As listed on the Letter of Registration)

M EMVCo Registration Number: Laboratory Identification M Company Legal Name:

M EMVCo Registration Number: ICS Submission Type M Select submission type <Select>

C For any submission except Initial, please provide the EMVCo letter of approval reference number of the previously approved product (if already granted)

M Is this ICS a replacement of a previously accepted ICS?

Yes No

C If Yes. please provide the reference number of the previously accepted ICS

C If Yes, please provide the reason for replacing the ICS

<Select>

C If Yes, please provide details of ICS replacement


PART II – Contactless Product Identification The completion of this section is mandatory and shall identify the product in its entirety Reader/terminal “Marketing name” containing the Contactless Product

Product Name:

Product Version:

Kernel C-2 Application Name

Kernel C-2 Version

Kernel C-2 Checksum Value (only if architecture is modular)

Test Configuration Data Sets – Name and Version (Provide the identification you have assigned to uniquely identify the batch of Configuration Data Sets used during the testing session)

Test Environment Interface – Name and Version (Provide the identification you have assigned to uniquely identify the Test Environment Interface used during the testing session)


PART III – EMV Specifications EMV Specification Date & Version: EMV® Contactless Specifications for Payment Systems - Book

A - Architecture and General Requirements Version 2.6 EMV® Contactless Specifications for Payment Systems - Book C-2 - Kernel 2 Specification Version 2.6


PART IV – Payment System Applications & Capabilities

Performance Values Offline Transaction Disposition Enter here your own measurements of the Offline Transaction Disposition as per EMV Book A in milliseconds The Vendor shall consider a transaction with the same configuration (terminal/reader and card) as defined for Kernel C-2 in the current version of “EMVCo Type Approval Performance Test Cases”.

Authorized offline:

Declined offline:

Require switching to another interface:

Status indicators: Please detail which signal(s) the product is using to indicate a successful card read:

Status Signal (leds, sounds …) Card read completed successfully


Testing Environment: Describe the installation and operation of the Device Test Environment submitted with the samples. Reference attached document(s).


Part V - Digital Signatures Product Provider I hereby declare that the above referenced product currently is and will remain in compliance with the above referenced EMV specification for all mandatory and supported optional requirements unless noted as non-compliant on the attached sheets Comments

Signature

Laboratory I hereby declare that this ICS document has been reviewed, and that all product information is consistent throughout the ICS. Comments

Signature

EMVCo Approval Secretariat Signature

Documents

Contactless Kernel C-2 Implementation …...Notice: This ICS form must be completed for products implementing the Kernel C-2 submitted to receive EMVCo Contactless Product testing