Construction of Proposed Zonal Office at Paryawas … of Proposed Zonal Office at Paryawas Bhawnan, Arera Hills , Bhopal Date :- ...21.01. 2011 ISSUED TO :-. M/S .. DATE :- …………………

PRICE BID

Construction of

Proposed Zonal Office

at

Paryawas Bhawnan, Arera Hills , Bhopal

Date :- ...21.01. 2011

ISSUED TO :-.

M/S ………………………………..

………………………………

DATE :- ………………….

Sr. Manager( HR)PLACE:- BHOPAL (M.P.) NFL . Bhopal

S NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT1.0 Demolishing brick workup to 250 mm thk

including plaster & tile, rcc band includingdisposal of unserviceable material to municipaldumping ground as directed by engineer in charge

job 1

2.0 Demolishing all plumbing and sanitary workincluding W C ( Indian , Western) ,Wash basin,concealed GI pipe , disposal of unserviceablematerial to dumping ground as directed byengineer in charge

job 1

3.0 Dismantling tile work in floors / wall / kotah ,flagstone flooring etc laid in cement mortar includingdisposal of unserviceable material .

job 1

4.0 Providing and applying postconstructional curativecum preventive antitermite treatment to thebuilding under construction by providing (i)Pumping the emulsion in plinth / masonry oninternal side at floor junction @ .25 liters per holeincluding drilling and making hole with mechanicaldrill @ 300 mm c/c along the external wall at thejunction of wall and floor . (1Chlorpyrifos:19water) with five years service guarantee.(measurements to be taken for carpet area).MakeDurban

Sq Ft 6500.0

5.0 Providing and laying Half brick ( 100 MM )masonry with bricks class made by Ghol processof designation 40 in mortar 1:4 ( 1 cement : 4coarse sand ).in superstructure including costof providing and placing in position 2nos.6mm dia. m.s. bars at every fourth course and50 mm thk M- 15 concrete including 100 chickenwire mesh . Rate shall be inclusive of all lead andlift , curing , scaffolding and for all floor level.

Sq Ft 1120.0

6.0 Providing and laying Brick masonry made by Gholprocess of designation 40 in mortar 1:4 ( 1cement : 4 coarse sand ).in superstructure.Rate shall be inclusive of all lead and lift , curing ,scaffolding and for all floor level.

Cu Ft 172.4

7.0 Providing and applying average 12 mm thkcement plaster in all positions over new masonryand concrete surfaces in cement mortar 1:4 toproper line level and plumb including curing,scaffolding etc. complete.

Sq Ft 699.3

BOQ & SCHEDULE OF ITEM

NAME OF PROJECT : PROPOSED INTERIOR WORK OF NFL OFFICE AT PARYAWAS BHAWAN BHOPAL

SCHEDULE - A

Signature Seal of Bidder nfl.f.est.boq Page 1

S NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT

8.0 Providing and applying average 15 mm thkcement plaster over new masonry and concretesurfaces in cement mortar 1:4 to proper line leveland plumb including curing, scaffolding etc.complete.

Sq Ft 1542.5

9.0 Providing and applying average 12 mm thkcement plaster polymer modified with fosroc andchicken in all positions over masonry andconcrete surfaces in cement mortar 1:4 to properline level and plumb including curing, scaffoldingetc. complete. and by engineer in charge .

Sq Ft 400.0

10.0 Providing and laying of brick bat coba waterproofing work with chemical treatment fortoilet/pantry average 125mm thk I/c dismantling &removing of old flag stone flooring /marble flooringincluding sub base. Then applying : Average 15-20mm Cement mortar screed admixed withCeebex 112 in proper slope along with fibers forreinforcement & to avoid development ofshrinkage cracks in future. Rate shall be inclusiveof dismantling and removing of old brick bat cobaand by engineer in charge .

Sq Ft 200

11.0 Providing and injection grouting ,drilling Holessuitable dia in zigzag manner along the crackline,fixing the nozzles, grouting Cement Slurryenriched with CEEBEX 100 @225gm/bag ofcement . SBR Latex @5 Lt./bag of cement withstandard pressure grouting pump until the refusalof slurry to get inside. Removal of nozzle andsealing holes etc as per standard practice and byengineer in charge .

each 20

12.0 Providing and applying average 6 mm thicknesspunning to all walls at all height to interiorsurface in proper line level and plumb includingscraping of old paint , making key to wall surface,including all scaffolding ,materials, T & P etc.

Sq Ft 2000.0

13.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings i/c fixing the pipe withclamps at 1.00 m spacing. This includes jointingof pipes & fittings with one step CPVC solventcement and the cost of cutting chases and makinggood the same including testing of joints completeas per direction of Engineer in Charge. concealed/ surface. Make ASTRAL or approved equivalent



13.1 32 mm nominal outer dia .Pipes. mtr 20.0

13.2 20 mm nominal outer dia .Pipes. mtr 30.0

14.0 Providing and fixing G.I. Pipes complete with GIFittings and clamps I/c cutting and making goodthe walls etc.; 15mm dia .Concealed pipeincluding painting with anti corrosive bitumasticpaint, cutting chases and making good the wall,Make Swastik, Surya

mtr 20.0

15.0 Providing and finishing walls with Luster paint (Satin Finish ) oil base in required shade withroller finish ( 3 coats) shade after thoroughlybrushing the surface , putty acrylic make Asian,oil base cement primer including all materials, T& P etc. Make Berger/ICI/Apcolite

Sq Ft 6000.0

16.0 Providing and finishing walls/ceiling with acrylicemulsion paint in required shade with roller finish( 3 coats ) shade after thoroughly brushing thesurface, 2 coats acrylic putty make Asian , onecoat of water base cement primer including all T& P etc.

Sq Ft 4448.6

17.0 Providing and finishing walls with Dulux velvettouch Berger Royal super acrylic emulsion paintin required shade with roller finish ( 3 coats )shade after thoroughly brushing the surface, 2coats acrylic puttymake Asian , one coat of waterbase cement primer including all T & P etc. andby engineer in charge .

Sq Ft 1271.0

18.0 Providing and finishing walls surface with a spray

texture rustic finish of spectrum and app.. shadeon undercoated including supply of material, labor,T&P etc and by engineer in charge .

Sq Ft 200.0

19.0 Providing and fixing Wash Basin White color :(MODEL - Alroy WAB 28 make EURO orequivalent in cero ,hind ware ) complete with CPwaste coupling 50 mm size, Bottle trap with190mm long wall connecting pipes, 450mm CPcopper pipes and brass nuts ( Fittings of Jaguar )complete .

each 6.0

20.0 Providing and fixing Wash Basin ( CORNER )White color :( MODEL - CASTA make EUROWAB 15 complete with CP waste coupling 50 mmsize, Bottle trap with 190mm long wall connectingpipes, 450mm CP copper pipes and brass nuts (Fittings of Aquel/ ESS) complete .and byengineer in charge .

each 3.0


S NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT21.0 Providing and fixing Wash Basin under counter

" White color 490x380x200 mm :( MODEL -ARIETA make EURO or equivalent in cero ,hindware ) complete with CP waste coupling 50 mmsize, Bottle trap (with 190mm long wall connectingpipes, 450mm 9 braided A1S 304 ) and CPbrass nuts " make Viking " complete and byengineer in charge .

each 2.0

22.0 Providing and fixing Urinal flat back half stall375x390x575 White color :( MODEL - PISCINAmake EURO or equivalent in cero ,hind ware )complete with CP waste coupling 50 mm size,Bottle trap with 190mm long wall connectingpipes( Viking ), copper pipes brass nuts,spreader nozzle (Fittings of Jaquar) complete )PUSH TYPE flushing system with CP wastecoupling 32mm size, Spray nozzle with 190mmlong wall connecting pipes, complete and byengineer in charge .

each 4.0

23.0 Providing and fixing wall hung EWC White color (model COSMO WAH06 make - EURO orequivalent of Hindware , parry ware ) includingsoft close seat cover ,installation kit etc completeand as directed by engineer in charge .

each 6.0

24.0 Providing and fixing Concealed flush tank with allaccessories 83 mm thk , flush plate ( model SAP506743 make - Hindware ) including installationkit etc complete and as directed by engineer incharge .

each 4.0

25.0 Providing and fixing of concealed flushing systemPush type ( Metropol Flush Valve ) connectedwith GI / CPVC Piping inclusive connecting to theexisting plumbing and fitting etc to the entiresatisfaction of the architect. Make Jaquar , Aquel, ESS . -50/35 mm & by engineer in charge .

each 2.0

26.0 Providing and fixing urinal division plate size 75 x16.5 x 36.5 with all accessories ( Model 61005make - Hindware ) including installation kit etccomplete and by engineer in charge .

each 2.0

27.0 Providing and fixing stainless steel sink - 18" x18" ( AISI304 18/8 ) with CP waste coupling 50mmsize,1 nos long body sink cock ( Carysil ARNO ),Complete with drain pipes and brass nuts (Fittings of Carysil/cero, ) complete and byengineer in charge . .

each 2.0

28.0 Providing and fixing Size 600 X 750 mm x 6 mmthk mirror fixed on 12 mm thk marine IS 710Grade ply wood and 4 nos stainless steel spacers. Mirror ( Modi ) shall have transparent safety filmbacking .

each 10.0



29.0 Fabrication and installation of stainless Steel AISI302 grade non magnetic railing having circularpipe of 50 mm dia .Rate shall be inclusive ofdrilling and fixing with dash fastener, ssflange,Cutting welding , buffing and polishing. Andas by engineer in charge .

Kg 200.0

30.0 Providing and fixing anodized 55 micron TCT(matching to existing color ) extruded aluminumsection conforming to IS:733, IS:1285 & IS:1868including jointing with extruded Aluminum cleatsneoprene weather stripping gasket beveledbeading, screws and as per direction of Engineer-in-Charge. Make Man , Jindal

Kg 110.0

31.0 Dismantling and reinstallation of existingaluminum windows / doors /sliding includingproviding neoprene gasket , TPI bearing ,concealed locks etc as required to windows. Rateshall be inclusive of filling the gaps with suitablegrade dow corning silicon sealant

Sq Ft 889.0

32.0 Providing supplying and fixing extrudedaluminum polyester power coated 55-65 TCTmicron section conforming to IS:733, IS:1285 &IS:1868 including jointing with extrudedAluminum cleats neoprene weather strippinggasket beveled beading, screws and as perdirection of Engineer-in-Charge. Make Man ,Jindal complete as per direction of Engineer-in-Charge duly fixed in walls .

Kg 150.0

33.0 Providing and fixing Ist quality ceramic glazed walltiles Make Somany ( Limited Bianco , Gris ) /Nitco /Varmora 250x350 / 300x450 (6-7mmthickness) of approved make in all colours,shades of any size as approved by architect inskirting, risers of steps and dados over 12 mmthick bed of cement Mortar 1:3 (1 cement : 3sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cementmixed with pigment of matching shade complete

Sq Ft 1017.7

34.0 Providing and fixing Ist quality ceramic floor tilesMake Somany ( Mosaic White / Nero ) / Nitco/Varmora 300X 300 (6-7mm thickness) ofapproved make in all colours, shades of any sizeas approved by architect in skirting, risers ofsteps and dados over 12 mm thick bed of cementMortar 1:3 (1 cement : 3 sand) and jointing withgrey cement slurry @ 3.3kg per sqm includingpointing in white cement mixed with pigment ofmatching shade .

Sq Ft 253.0



35.0 Providing & laying of full body vitrified " SatinFinish" tiles of size 600x600 +/- 6mm andapproved shade shade, over existing flooring,after tucking of existing floor base and fixed withcement mortar 1:3 bed and slurry of tile adhesiveaverage thickness 20 mm . The joints to befinished with white cement and color to match thebase color of the tiles. To be properly finishedincluding supply of all materials labor and T&Petc. make Restile " Pearl rock " / RAK orapprove equivalent"

Sq Ft 4892.7

36.0 Providing and fixing 16 mm thick mirror polishedmachine cut riser and tread of step, skirting andmidlanding in two colors including providing6x6xmm bull nose aluminum T channel across thelength of treads of required size

of approved shade, color and texture laid over 15mm thick base cement mortar 1:4 (1 cement: 4coarse sand) with joints treated with white cementmixed with matching pigment, epoxy touch upincluding rubbing, curing etc. complete in all level.Granite Jed Black / steel grey over 1 sqm but upto 2 sqm. Rate shall be inclusive of making andpolishing round edge molding for treads .

Sq Ft 20.0

37.0 Providing and fixing 16 mm thick mirror polishedgranite machine cut for kitchen platforms, vanitycounters fascias, floor of required size ofapproved shade, color and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4coarse sand) with joints treated with white cementmixed with matching pigment, epoxy touch upincluding rubbing, curing etc. complete in all level.granite black over 1 sqm .

Sq Ft 60.0

38.0 Providing and fixing 18 mm thick mirror polishedmachine cut for kitchen platforms, fascias, window sill and similar locations of required size ofapproved shade, color and texture laid overwooden cabinet .Baroda Green over 1.2 sqm slaband on average 15 mm thick base cement mortar1:4 (1 cement: 4 coarse sand) with joints treatedwith white cement mixed with matching pigment,epoxy touch up including rubbing, curing etc.complete in all level.

Sq Ft 150.0

39.0 Providing and fixing 18 mm thick mirror polishedmachine cut for kitchen platforms, fascias, window sill and similar locations of required size ofapproved shade, color and texture laid overwooden cabinet .Baroda Green over 1.2 sqm


S NO ITEM DESCRIPTION UNIT QTY RATE AMOUNTslab and on average 15 mm thick base cementmortar 1:4 (1 cement: 4 coarse sand) with jointstreated with white cement mixed with matchingpigment, epoxy touch up including rubbing, curingetc. complete in all level.

Sq Ft 150.0

40.0 Extra for providing edge molding to 18 mm thickGranite / green marble including machinepolishing to edge

R ft 60.0

41.0 Providing and fixing of CP angle 15 mm stop cock/angle with wall flange . Make Jaquar , Aquel ,ESS.

each 15.0

42.0 Providing and fixing of quarter turn Chrome Plated( CP ) two way bibcock cock with wall flange ,extension nipple etc as required. Make Jaquar ,Aquel , ESS.

each 7.0

43.0 Providing and fixing health faucet with 1/2" x 24 "( Make Viking )

each 7.0

44.0 Providing and fixing of time delayed self closingpillar cock 15 mm dia nominal bore . Make VikingModel 11512 or Make , Aquel , ESS

each 10.0

45.0 Providing and fixing of Toilet paper holders Ozone- OZBATRH01VL.

each 4.0

46.0 Providing and fixing of C.P towel ringsOZBANRH01VL. Make Jaquar , Aquel.

each 4.0

47.0 Providing and fixing of Chrome plated push buttonSoap dispenser Make Jaquar , Aquel , Ess.

each 4.0

48.0 Providing and fixing of C.P robe hooks . MakeJaquar , Aquel , Lauret.

each 7.0

49.0 Providing and fixing brass ball valve . 35mmnominal bore.ISI heavy duty Make Astral

each 2.0

50.0 Providing and fixing cockroach trap on 100 mmnahani trap with CP jali .Make Chilli,mayra

each 7.0

51.0 Providing and fixing of stainless steel AISI 304towel rail 600mm Make - Jewel , Ozone, 3square.

each 3.0

52.0 Providing and fixing on wall face unplasticised -PVC (working Pressure 6Kg. per sq cm) rain water pipes conforming to IS:4985 including jointingincluding all necessary bends , tee, collar,washers , pvc saddle, screw, clips etc as required

a 110mm diameter R ft 90.0

b 75mm diameter R ft 60.0



53.0 Providing & fixing solid core block boardconstruction ISI 30 mm thick BWP Grade flushdoor shutters over all thickness 32mm includinglaminate . Both faces of shutter to be laminatedwith 1.0 mm thick laminate as shown in drawing.Door shall have 5mm thk float glass with acid

/ metal louver . All edges of flush door to beprovided with 5mm thk teakwood lippingincluding necessary hardware such as doorstoppers, stainless steel 4nosx100 x 35 bearinghinges (ozone, magnum,kich) . Rate shall beinclusive of labour, T & P, accessories andancillaries etc as required and as directed by eng-in -charge. Make -Sylvi /Sainik

Sq Ft 441.0

54.0 Providing and fixing fist class teak wood doorframe .with teak wood 125 x 65 section and heldinto position by approved stainless steel ( chili)hold fast, anchor bolts etc.

cu ft 20.0

55.0 Providing and fixing at all height false ceilingincluding providing and fixing of frame work madeof special sections power pressed from M.S. sheetand galvanized in accordance with zinc coating ofgrade 350 as per IS : 277 and consisting of anglecleats of size 25mm wide x 1.6mm thick withflanges of 22mm and 37mm at 1200mm centre tocentre one flange fixed to the ceiling with dashfastener 12.5mm diax40mm long with 6mm diabolts to the angle hangers of 25x25x0.55mm ofrequired length, and other end of angle hangerbeing fixed with nut and bolts to G.I. channels45x15x0.9mm running at the rate of1200mmcentre to centre to which the ceilingsection 0.5mm thick button wedge of 80mm withtapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre shall be fixedin a direction perpendicular to G.I. channel withconnecting clips made out of 2.64mm diax230mmlong G.I. wire at every junction including fixing thegypsum board with ceiling section and perimeterchannels 0.5mm thick 27mm

high having flanges of 20mm and 30mm long,make Gypsteel the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mmcentre to centre with 25mm long drive-all screws@ 230mm interval including jointing and fixing toa flush finish of tapered and square edges of theboard with recommended filler, jointing tapes,finisher and two coats of primer suitable for boardas per manufactures specification and alsoincluding the cost of making openings for lightfittings, grills,

Sq Ft 4448.6


S NO ITEM DESCRIPTION UNIT QTY RATE AMOUNTdiffusers, cutouts made with frame of perimeter

channels suitably fixed all complete as perdrawing and specification and direction of theEngineer in Charge.Excluding the cost of paintingbut including 12 mm thk gypsum board (moisture resistant grade ) of Saint Gobain,Elephant .

56.0 Providing & fixing 600 x 600 tegular edge mineralfiber board tiles16mm thk of Armstrong / SaintGobain make micro look finish tegular edge tilesat various heights as per drwgs. & details, withArmstrong /saint gobain select / silhouette gridframe work frame work in 600x 600 framw work.

Sq Ft 1000.0

57.0 Dismantling and reinstallation of existing doorframe including providing new MS hold fast,concrete block etc as required

Nos. 10.0

58.0 Providing and fixing low height partitions height(78mm thk ) Both face shall have 9 mm ply .Make sylivy,sainik,CP and core frame workmadeof ( 50 x 18 x2) mm i.e. 50 x 36 mm plywood grid 500 x 500 mm c/c both ways .Rate shall beinclusive of providing 8mm thk toughened glasspolishing , T & P etc as required. Core frameshall have 30mm dia perforation @ 900 c/c

Sqft 731.00

59.0 Partitions - Providing and fixing partitions lowheight partitions up to 1200mm( 102 mm thk )Both face shall have 9 mm ply +4 mm MDF andcore frame work of ( 76 x 18 x2) mm i.e. 76 x 36mm plywood ( fire retardant grade ( flammabilitynot less than 30 minutes & other parametersconfirming to IS 5509 - 2000 ) grid 500 x 500mm c/c both ways . Make sylivy,sainik .Rateshall be inclusive of 8 MM thk toughened glasspolishing , T & P etc as required.Slats shall have30mm dia perforation @ 600 c/c

Sqft 100.00

60.0 Providing and applying two coats of fire retardantpaint unthinned on cleaned wood/ply [email protected] per liter percoat including preparationof base surface as per recommendations ofmanufacturer to make the surface fire retardant.

Sq Ft 3196.3

61.0 Partitions - ( Full Ht.Wooden Partition ) Providingand fixing partitions having both face shall have9 mm ply (IS 303 )+ 4 mm MDF and core framework made of ( 50 x 18 x2) mm ie 50x 36 mmplywood ( fire retardent grade flammability notless than 30 minutes & other parametersconfirming to IS 5509 - 2000 )



grid 500 x 500 mm c/c both ways . MakeSylivy,Sainik .Rate shall be inclusive of providing6mm toughened glass , T & P etc asrequired.Core frame work shall have 30mm diaperforation @ 600 c/cfor wire management

Sq Ft 2465.27

62.0 Extra for providing 4.0 mm thk veneer ( Wallnutgroup match )make Archid on face of partition/with marine grade PVA glue . Rate shall beinclusive of of polishing & finishing with melaminepolishing ( MRF ,Vam Organics )

Sq Ft 1160.00

63.0 Extra for providing 1.0 mm thk laminate (textured) (Olive , Vir , Formica ) on face ofpartition in specified design annd grrove withmarine grade PVA glue ( fevicol ).

Sq Ft 4272.54

64.0 Providing and fixing insulation of 8mm thick oneface laminated aluminium foil, fire retardant,closed cell, cross linked PE foam light gray colour( Make supreme ) including drilling and fixing theinsulation to wall with fischer make pvc rawl plug, full threat round head steel screw with washers@ 1200 c/c both ways etc complete.

Sq Ft 1600.0

65.0 Providing and fixing wall panelling having fasciaof 9 mm ply (IS 303 ) and core frame work ( 60x 18 x 2 ) mm ie 60 x 36 mm plywood ( fireretardent grade , flammability not less than 30minutes & otherparameters confirming to IS 5509 -2000 ) grid 500 x 500 mm c/c both ways .Make sylivy,sainik .Core frame work shall have30mm dia perforation @ 600 C /C for wiremanagement.

Sq Ft 1000

66.0 Providing and fixing, in position concealed G.Isection for paneling using 8mm thick (HighPressure Steam Cured), pre-primered, FiberCement Boards conforming to IS 14862:2000fixed on the supporting ‘W’ profile (0.55 mm thickhaving a knurled web of 51.55 and 1200 mm c/chorizontally in perimeter channel (having oneflange of 20 mm and another flange of 30 mmwith thickness of 0.55 mm and web of length 27mm). Perimeter channel is fixed on the floor andthe ceiling with the nylon sleeves @ 300 mm c/cwith expandable fasteners. Board is fixed to the‘W’ profile with 25 mm long self

Sq Ft 800

embedding type fibre cement screws @ 300mmc/c, all complete as per the drawing & directions ofengineer-in-charge. Uniform gap/groove to becovered with decorative molding or may befinished with Jointing Filler. Make Everest / Shera



67.0 Soft Pin Cladding -Providing and fixing over 12mm soft board covered with fabric and 4 mm thkplywood backing as approved with edge leapingof teak wood and fabric costing 300/- mtr.

Sq Ft 200

68.0 Providing and fixing of aluminium composite panel 3mm thick sheet of Alstrong / Alucobond makeconsisting of a core of polythethylene sandwich ofPVDF paint. The PVDF coated finished surface tobe factory protected with self adhesive peal of foiltested to withstand at least six months . Thecomplete sheet is to be cut, bent and fixed on50x35x1.5mm alluminium pipe . The angle is to be fixed to the wall with anchoner fasteners

of Fisher/ Hilti make and the supporting anglewill be fitted by 25x6mm but bolts. the sheet panelwill be fitted to the supporting angle of35x351.5mm with 25x8mm steel screws. The gapof 8mm between the two panel will be filled withsilicon sealant of 789 DOW CORNING make, tomake the system waterproof.

Sqft 250.0

69.0 Storage Cabinet- 400 mm / upto 2400 high above1200- Providing & fixing into position storagecabinet made with phenol bonded 19 mmthick BWP IS 303 block board ( make - Sylvi ,Green) with 1.0 mm thick laminate ( make -Olive,VIR,Formica) on shutter fascias, sides . Thestorage unit shall consist of openable Shuttermade of 19 mm thk BWP Grade block board 1.0mm laminate face & .8 mm laminate on innerface . All exposed edges finished in anodisedaluminium edge profile 21 mm make ebco modelEP1901 / EP1908 . All the units shall beprovided with all the necessary hard wareapproved by architect such as shutter handleprofile ebco SH1935 , locks ( door set , hettic,godrej ) , W hinges /auto closing hinges 110 , magneticcatcher ,etc. All internal surfaces, shelves shallbe laminated with .8 mm thk laminate .Shelvesshall ve made of 25 mm thk bothside laminated .8mm and fixed @ 400 mm c/c vertically andvertical division @600 mm c/c horizontalymaximum @ 400 mm c/c vertically and verticaldivision @600 mm c/c horizontaly maximum.Back shall have 8 mm thk cement bonded fibreboard ( Make shera )

Sqft 677.74

70.0 Storage Cabinet- 450 mm depth (upto 1200height )Providing & fixing into position storagecabinet made with 19 mm thick IS 303 blockboard ( make - Sylvi , Green , sainik ) with 1.0mm thick laminate ( make - Olive,VIR,Formica) on shutter fascias, sides .



The storage unit shall consist of openableShutter made of 19 mm thk BWP Grade blockboard 1.0 mm laminate face & .8 mm laminateon inner face. Back shall have 12mm thk plywoodand 1 mm laminate . All exposed edges finished inanodised aluminium edge profile 21 mm makeebco model EP1901 / EP1908 . All the unitsshall be provided with all the necessary hard wareapproved such as shutter handle profile ebcoSH1935 , locks ( door set , hettich ,godrej ) , Whinges /auto closing hinges 110 , magneticcatcher ,etc. All internal surfaces, shelves shallbe laminated with .8 mm thk laminate .Shelvesshall ve made of 19 mm thk bothside laminated .8mm and fixed @ 400 mm c/c vertically andvertical division @600 mm c/c horizontalymaximum @ 400 mm c/c vertically and verticaldivision @600 mm c/c horizontaly maximum.

Sqft 124.00

71.0 Work Station :-Providing & Fixing workstationsmade of phenol bonded IS 303 25mm thick isIS 303 grade ( Sylvi,sainik,green ). block boardfor top and sides and 1 mm thk laminate on topface , both faces of sides and .80 mm below topmake ( Olive,Vir,Durian ) . Each station moduleshall be inclusive of providing key board tray (ebco,efficient gadjet) , CPU stand ( ebcohanging/floor mounted ), S S wire manager (ozone) .Shape and size shall be as shown indrawing, standard height shall be 725/750 mm

Sqft 565

72.0 Drawer Cabinet- Size- 400 (w) x 400 (d) x 650(H)

each 42

Providing & fixing into position side unit madewith phenol bonded 19 mm thick IS303 blockboard with 1.0 mm thick laminate on top, frontand .8 mm thk laminate from inside ,edgesfinished in 1.0 mm thk laminate.The cabineteunit shall consist of open ableshutter made up of19mm thick phenol bonded block board ( IS303) with 1.0mm thick laminate ( Olive , Vir ,Durian ) on outer face face and balancing .8 mmlaminate in inner face . Drawer shall have ballcage drawer slide ( hettich,ebco, .Back shall have12 mm plywood . All the units shall be providedwith necessary hardware such as Stainless steelhandles 100 mm , locks ( door set ,hettich ) ,Whinges 50/18 , magnetic catcher ,etc.

73.0 Side Cabinet - Size - 1200 mm long' (L) x 400mm (W) x 650 mm (H) - Providing & fixing inposition side unit made with phenol bonded


S NO ITEM DESCRIPTION UNIT QTY RATE AMOUNT19 mm thick bwp board with 1.0 mm thick

laminate ( Olive , Vir ,Durian ) on top, front and .8mm thk laminate from inside ,edges finished in1.0 mm thk laminate.The cabinete unit shallconsist of open ableshutter made up of 19mmthick phenol bonded block board ( IS 303)

with 1.0mm thick laminate on outer face faceand balancing .8 mm laminate in inner face .Drawer shall have ball cage drawer slide (hettich,ebco, .Back shall have 12 mm plywood .Allthe units shall be provided with necessaryhardware such as Stainless steel handles 100mm , locks ( door set ) ,W brass hinges 50/18 ,magnetic catcher ,etc each 6

74.0 CORNER TABLES :-Size- 600 mm x 600 mm x400 H - 19MM thk block board base withbevelled edge glass 12 mm toughened float glass, board shall have 4 mm thk wall nut veneer

each 6

75.0 TABLES -1500 L X 750 W X 750 mm H - For SRManager -Supplying & fixing in position tablewith working top 750 mm wide at 750mm levelmade of 25 mm thick block board of IS303 grade( make - Sylvi , Green, Sainik) and front panelmade of 19 mm thk block board with 1.0 mm thkcross brushed steel

laminate sheet front panel and 1.0 mm thk walllaminate on front, sides and top .Table shall haveprovision of side cabinet 900(L) x 450 (W) x 675(H) - made with phenol bonded 19 mm thickbwp board with 1.0 mm thick laminate on top,front & both face of sides (textured laminate ),0.8 mm below top ,edges finished in 1.0mm thklaminate. Table shall have 80 mm side panel ( refdrg ) 900 mm height both side 1.0 mm laminate .Refer Drg NO- F5

Nos. 6

76.0 Zonal Manager - Size- 1800(L) x 850 (W) x 750(H) Supplying & fixing in position table withworking top 850 mm wide at 750mm level madeof 25 mm thick block board of IS303 ( make -Sylvi , Green, Sainik ) and front panel made of 19mm thk block board with 1.0 mm thk crossbrushed steel laminate sheet, 4.0 mm thk WallNut veneer (Archid /Green/Natural ) polished inmelamine finish on front, both face of sides andtop . Table shall have provision of side cabinet1200' (L) x 450 (W) x 700 (H) - made withphenol bonded 25 mm thick bwp board with4.0 mm veneer on top , shutter fascias, edges.8mm thk laminate below top. The cabinet unitshall consist of drawer/ open

each 1



able shutter made up of 19mm thick phenolbonded block board ( IS 303) with all thenecessary hard ware approved by the designersuch as Stainless steel handles 100 mm , locks (door set ), ball cage drawer slide (hettich,ebco,brass hinges ,magnetic catcher S Swire manger (ozone 55 mm ), SS Legs 100 mmetc. Table shall have 80 mm hick side panel ( refdrg ) 900 mm height with veneered 4mm andmelamine polished. All inetrnal surface shall have0.8 mm laminate REF DRG NO F3

77 Meeting Table - Providing supplying and fixing ofconference table .Table top width shall be 900 mmand height shall be 730 mm . Top made of 25 mmthk BWP plywood and 1.5 mm thk laminate and38 mm thickness at edges. Base shall be made of80 mm thk hollowcore plywood frame with 6 mmflexible plywood and 1.0 mm Laminate : Make:Olive/ Durian , Veneer Archid /duro, Edges shallhave 40x6 melamine polished wallnut leaping.Size 1800 x 900

each 1

78 Conference Table.- Providing supplying and fixingof conference table in 4 part module joinedtogether to form ovall shape having maximumlength of 14 feet length and maximum width6'6''at centre as shown in drawing. Table top widthshall be 600 mm and height shall be 730 mm .Top made of 25 mm thk BWP plywood and 38mm thickness at edges with1.5 mm thk laminate ,Base shall be made of 80 mm thk hollowcoreplywood frame with 4 mm flrexible plywood and4.0 mm thk veneer on both face polished inmelamine finish Cable carrier made of 12 mmplywood below top shall be provided for wireManagement Flipup : Flip up beam is a wiremanagement device, fitted on to the tabletopCable Dump : . Laminate : Make: Olive, Durian,Veneer Archid /duro, melamine Vam Organics.Edges shall have 40 x 12 wall nut leaping polishedin melamine

each 1.0

79 Reception Table :- Size- 5.5'(L) x 2’-3”(W) x 3-4”(H) Supplying & fixing in position receptioncounter with working top 600 mm wide at 750mmlevel made of 25 mm thick block board of phenolformaldehyde resin bonding ( make - Sylvi , Duro,Sainik ) and 300 mm wide 12 mm toughenedglass service top at 1000 mm level includingdrawer unit 400 mm wide 450 mm deep , 600mmhigh . Front made of 100 mm thk block boardpartition with 1.0 mm thk


S NO ITEM DESCRIPTION UNIT QTY RATE AMOUNTbrushed finish steel laminate sheet &1.0 texured

laminate on all surfaces . Table shall haveprovision of drawer cabinet consist of drawers /open able shutter made up of 16mm thick phenolbonded block board with 1.0mm thick laminateon both face with all the necessary hard wareapproved by the designer such as Stainless steelhandles 100 mm , locks ( hettich, door set ) ,brass hinges , magnetic catcher, drawer channel(hettich), EBCO keyboard tray etc.

each 1.0

80 Providing, making and placing in position fullyupholstered Sofa in module of two seater having100 mm wide arms on both sides as per designand drawing with hollock wood frame work,flat spring, stitching, slopes contours, hemmingwith seat of 100mm thick foam , 50mm thickhigh density foam on back and arms with 25mmthick high density foam, seat and back coveredwith best quality markeen, and finished in fabric(of not more than Rs.450 per mtr.) of approvedcolour, texture and quality including teakwood molding / frame. seat size 500mm wide,550deth, overall depth 700 mm

each 6

81 Providing and fixing reflective ( one way ) typeheat / light control film to window / door glazingas marketed under the brand name of Garware, 3M or equivalent as approved. Rate shall beinclusive of removing old film from window glass

Sqft 789.0

82 Providing and fixing of dust proof roller Blindsof approved shade texture and fabric ( opaque /eclipse ) make complete in all respects andproperly finished to the satisfaction of tengineer incharge , Make Vista,Hunterdouglas, or approvedequivalent.

Sqft 589.0

83 Providing and fixing in position on rose 6 levercylindrical lock stainless steel mortise lock andhandle . Make Dorset nik on rose / Ozone OMH11L , One side key one sode Knob

each 10.0

84 Providing and fixing in position on rose stainlesssteel mortise handle . Make Dorset Nik on rose /Ozone OMH 11L Bathroom type

each 6.0

85 Providing and fixing CP brass tower bolts size200 x 8 mm.

each 15.0

86 Providing and fixing concealed lock in doorscomplete. make , OMH L L1 SS 55 Ozone

each 4.0

87 Providing and fixing glass door handles 675 mm

length (pair ) 302 grade stainless steel brushed

finish handle and wood . Make PAN MODEL PA

310.

each 6.0



88 Providing and fixing floor spring suitable for 150kgs make" ozone / doorset suitable for patchfittings of toughened 12 mm glass doors asrequired, making holes, cut out for locks andcover plates etc. complete as per direction ofEngineer - In - charge.

each 6.0

89 Providing and fixing door closer. Make Ozone,Doorset , Haffele

each 8.0

90 Providing supplying and fixing of Stainless steelsignage plate 100x 100 X .8mm with stamped,etched color logo fitted to wall /partition with caphead steel screw.installed and mounted over 200x 150 x 6 mm forex sheet.

each 8.0

91 Providing supplying and fixing Stainless Steel 750x 750 mm x 2.0 mm metal logo at buildingfaçade .Logo shall be laser cut . ( Registered logoOf NFL )

set 1.0

92 Providing and fixing Frameless 12 mm thicktoughened glass door[glazing with accessories like corner lock/ pivot/ upper hinge/ lower hinge/ overpanel/ impost hinge, connectors, locks & otheraccessories as necessary of SS 304 (SaintGobain/ ozone /hypert) make. Glass should besaint Goblin / modi /ashai float .Vendor to submitdesign and make & Model No. of all fittings for allheights as required and directed by Engineer incharge.Rate shall be inclusive of polishing ofedges, cutting ,etc as required

Sqft 112.0

93 Providing and fixing ASTRO TURF Door matts ofapproved make

Sqft 90.0

94 Stainless Steel Dustbins 400 mm dia perforatedbody 202 grade SS

each 6.0

95 Providing and fixing vitreous enamelled steelsheet top surface suitable for writing andprojection screening on writing face & aluminiumframe with all accesories , markerpen,eraser/duster. Make - AKRITI or approvedequivalent

95.1 Size -1800x1200 Make Krati model krati /C SWB,Color - White

each 1

95.2 Size -900 x 600 Make Krati model krati /C SWB,Color - White

each 6

95.3 Size -900 x 1200 Make Krati model krati /C SWB,Color - White

each 3

96 Providing and fixing OES DR - 11 lockableshutter drawer sfae with all accesories Make -Ozone

each 1



97 Providing and fixing name card holder and keyboard with, aluminium frame and lockable glazedshutter with all accesories Make - AKRITI "ADKB : or approved equivalent

each 1

98 CHAIRS98.1 Providing and fixing ( DGM ) Revolving chair .

Model Anatom Slide Medium Back , makeFeatherlite .

each 1.0

92.2 Providing and fixing Conference Chair Revolving

: Model -DYNAMIC , Make Featherlite.

each 1.0

92.3 Providing and fixing ( Sr Manager ) chairRevolving - Model Duck Medium Back MB , makeFeatherlite .

each 20.0

92.4 Providing and fixing Manager Chair Revolving:Model - Advantage, Make Featherlite

each 15.0

92.5 Providing and fixing Dy .Manager chairRevolving (Model - Bristol ) , Make Featherlite,Wipro

each 34.0

SUB TOTAL - A RS

B ELECTRICAL , DB & INTERNAL WIRING 93 Supply installation, testing and commissioning of

following DBs of make ( MDS / L&T /HAVELLS) vetical type with one hinged door to covercomplete flush mounted as under

93.1 Lighting DB - Phase changing type TP Incomingside - 1 no. 40 Amp. 4 Pole TPN MCB 10 KAOutgoing side - 9 Nos of 10 Amp SP MCB 10 Ka.(Leigrand/northwest / L&T )

each 3.00

93.2 Supplying and installing Dist. Box Havells loadline DB with incomer MCCB-100Amp. Outgoingisolator 3 nos TP three phase 63 Amp

each 2.00

93.3 UPS DB - Single phase Incoming side - 1 no. 40Amp. 4 Pole TPN MCB .Outgoing side - 9 Nos of5 Amp SP MCB 10 Ka & 30 ma(Leigrand/northwest / L&T )

each 2.00

94.0 Supplying, unloading, storing , laying, testing andcommissioning of following sizes of PVC / XLPEinsulated (Heavy duty) Al / Cu conductor armoured cables suitable for working voltage uptoand including 1100 Volts , laid and tied onexisting overhead cable trays; or laid and tied overMS supports in masonry trenches includingproviding MS supports and clamps for fixing tosupports ; or buried in ground



complete as required and as per specifications.(Polycab ,Havells, Finolex )

94.1 Aluminium Armored - 4 core 16 sq mm Mtrs. 150.00

94.2 Aluminium Armored - 3.5 X 25 sq mm mtr 100.00

95.0 Supply installation , testing and commissioning of25 amp starter with plug & socket power unit forAC. ( using modular accessoriesof Nort west,Legrand mosaic )

each 2.00

96.0 UPS outlets – 2 nos. 10 Amp 3 hole socket with10 Amp SP control switch on one box and theseto on a box looped on one circuit. ( using modularaccessoriesof Nort west, Legrand mosaic,MKLogic )

set 44.00

97.0 Supply , fixing and testing in 20mm dia 2 MMTHK PVC conduit and 6 mm insulated coppercable insulated upto DP.Make AKG

mtr 80.00

98.0 Digging of earth pit by boarding machine on inhard rock/soft rock 4" (100 mm) dia bore anddepth upto 100 feet and then inserting 40mm diaG.I. pipe ('A' Class) for earth electrode to thedepth of 100 feet and packing earth electrode 20feet bottom of the bore with the mixture of blackcotton soil salt and char coal etc. and fill upremaining part of bore with black cotton soil andfixing and providing and testing earth terminalsupper end for taking out going copper strip withrequired lamps nut bolts etc. as per I.E.Specification as required.

each 1.00

99.0 Preparation of the Plate Earth Station: (as perIS:3043) Excavation of rocky earth, soft murrum,hard murrum etc and back filling with black cottonsoil for the earth station, the earth pit size is 1000mm x 1000 mm x 2500 mm deep.S/F of Copperplate of size 600 x 600 x 3.0 mm thick. fixing 50mm x 6 mm, 3 mtrs Copper strips from G.I.plateto earth terminal including brazing / welding atplate etc. Supplying and laying in position 19 mm,2 mtrs G.I. `B' class pipe for watering.withreducer/funnel with mesh.

S/F of the following in the earth station. 75 Kg.Charcoal. +15 Kg. Original Salt.+ Black Cottonsoil Construction of earth pit chamber includingnecessary brick work concrete, plastering, S/F ofC.I. Cover of size 12" x 12" complete as per sitereq.

each 1.00

100.0 Preparation of the Plate Earth Station: (as perIS:3043) Excavation of rocky earth, soft murrum,hard murrum etc and back filling with black cottonsoil for the earth station,



the earth pit size is 1000 mm x 1000 mm x 2500mm deep. S/F of G.I. plate of size 600 x 600 x 6.0mm thick. fixing 50 mm x 6 mm, 3 mtrs G.I, stripsfrom G.I.plate to earth terminal including brazing /welding at plate etc.Supplying and laying inposition 19 mm, 2 mtrs G.I. `B' class pipe forwatering with reducer/ funnel with mesh.S/F of thefollowing in the earth station. 75 Kg. Charcoal. 15Kg. Original Salt. Black Cotton soil Constructionof earth pit chamber including necessary brickwork concrete, plastering, S/F of C.I. Cover of size12" x 12" complete as per site requirement.

each 2.00

101.0 Providing and fixing Copper / GI strip as perspecification complete including connection toearth electrode revetting / sweating / soldering,burying 15 cms below in all types of soil / rocksetc complete as required.

a G.I.Strip 25 X 5 mm mtr 125

b G.I.Strip 50 X 6 mm mtr 100

c Copper Strip 25 X 5 mm mtr 50

d Copper Strip 50 X 6 mm mtr 20

102.0 POINT WIRING Providing wiring ( supply, fixing, testing andcomm. etc) for light point /Exhaust fan point / Callbell point / Ceiling fan point i/c fan box ( ifrequired) etc with 1.5 sq mm PVC insulated copperconductor singlecore multi strended wire in 16swg stove enamelled rigid steel conduitwithconduit accessories like bend , junction box etc inconcealed / surface manner as per siterequirement with suitable Modular Switches withplate and metal / PVC box, 3 plate ceiling rose /bulb holder etc including 1.5 sqmm PVC insulatedcopper earth wire in loop system ( max four points) etc complete as required. Wire colours :

Red, Black, Green .( using modular accessoriesofNort west, Legrand mosaic ,) Light Point/FanPoints.

a One light point controlled by one 10 amp switch. each 100.00

b Two light point controlled by one 10 amp switch. each 30.00

c Ceiling point controlled by followings : one noswitch and one no stepped electronic regulator (two Module )

each 8.00



d Call bell point wiring including supply andinstallation of anchor Bell, Bell indicator withacknowledges switch, bell push etc.

each 4.00

103.0 6/10 AMP. Point on same board:Supply,fixing,testing and commissioning of 1 No6 A Multi Socket with1No. 10 A switch ( Modulartype ) with cover plate , sheet steel box /PVCmodular box etc on surface / concealedmanner I/c electrical connections and makinggood all the damages, painting, cleaning the siteetc complete as required as per site requirementand as directed.( using modular accessoriesofNort west, Legrand mosaic ,)

each 20.00

104.0 6/10 AMP. Point on seperate board.Supply,fixing,testing and commissioning of 1 No6 A Multi Socket with 1No. 6 A switch ( Modulartype ) with cover plate , sheet steel box / PVCmodular box etc on surface / concealed mannerI/c electrical connections and making good all thedamages, painting, cleaning the site etc completeas required as per site requirement and asdirected.

each 20.00

105.0 10/ 20 AMP. POWER POINTS:Supply, fixing,testing and commissioning of 1 No 16/20 A switch& 1 No.six pin 6/16 or 10/20 Amp. Multi Socket (Modular Type ) with cover plate , sheet box etc onsurface / concealed manner I/c electricalconnections and making good all the damages,painting, cleaning the site etc complete asrequired as per site requirement and as directed.

each 10.00

106.0 AC / GEYSER POWER POINTS :Supply,Installation, Testing and commissioning of thesurface / recess mounting A.C. / GEYSER pointwith the followings :32 A D.P.,1 way switch withneon with plate and box.- 1 set 25 A & 10 A Twinsocket with plate and box.- 1 Set. i/c electricalconnections and making good all the damages,etc complete as required as per site requirementand as directed.painting, cleaning the site

each 10.00

107.0 CIRCUIT WIRING / SUB MAIN WIRING ( specialyfor laboratory wiring ) Supply, installation, testingof concealing power point wiring with PVCinsulated stranded copper conductor wires frompanels to places in concealed 25 mm dia heavyduty 2mm thk low halogen SFT rigid pvc typeconduit, ISI marked. Halogen free fire retardantgrade wire finolex / RR



a 2 nos x 2.5 +1.5 sq.mm stranded copper wire1100 VG

mtr 700.00

b 2nos x 4 + 2.5 sq.mm stranded copper wire1100 VG

mtr 150.00

c 2nos x 6 + 2.5 sq.mm stranded copper wire1100 VG

mtr 80.00

d 4nos x 4 + 2.5 sq.mm stranded copper wire 1100VG

mtr 200.00

108.0 Emergency Signage ceiling suspended / wallmounted "exit signage " with in built batterybackup 1 hr , make crompton, aluminiumextruded housing for surface / pendant mounting.Cat No -exl/t/1/de/s/dd or EXL/C/1/SE/W/DDFOR LED exit sign

each 3.00

109.0 Providing supplying and fixing of GI 15 mm diafan rod 400mm feet length with fan hook at newposition including 8mm dash fastener type (FISCHER ) Fan hook

each 15.00

110.0 Supplying, installation and testing flexible wireinterconnection etc. & all accessories asrequired1200 mm sweep Ceiling fan

each 15.00

111.0 Supplying, installation and testing flexible wireinterconnection etc. & all accessories asrequiredWall Fan 600 mm sweep, metal blade -Make Crompton , Usha , Havells

each 10.00

112.0 Supplying, installation and testing flexible wireinterconnection etc. & all accessories as requiredexhaust fan .Make CATA , MODEL LVH -300 orapproved equivalent

each 3.00

113.0 Supplying, installation and testing flexible wireinterconnection etc. & all accessories as requiredhavells make ceiling mounted exhaust fan with 2mtr 150 mm dia PVC pipe .Make -Havellsapproved equivalent

each 3.00

114.0 Installation and testing interconnection withflexible wire etc. & all accessories as required SPDP MCB UPTO 32AMP

each 50.00

115.0 Dismantling of all existing internal electricalwork,Distribution Panel , dub DB single phase /three phase ( excluding main panel) , internalwiring as directed

job 1.00

SUB TOTAL - D RS

Signature & Seal of Bidder



C TELEPHONE POINT :116.0 Supply , fixing and testing telephone cable in 20

mm dia 2 mm thk. PVC conduit ( Finolex/prince,)concealed including making chasses in wall/ flooretc. and repairing of same. Make - D Link/ Delton/ finolex

a Two pair, 0.50 mm dia. telephone cable tinnedcopper conductor, P.V.C. insulated and sheathed ,fire retarding, anti termite, colour coded twistedpairs and rip cord.

mtr 800.00

b 10 pair, 0.50 mm dia. telephone cable tinnedcopper conductor, P.V.C. insulated and sheathed ,fire retarding, anti termite, colour coded twistedpairs and rip cord.

mtr 50.00

c 20 pair, 0.50 mm dia. telephone cable tinnedcopper conductor, P.V.C. insulated and sheathed ,fire retarding, anti termite, colour coded twistedpairs and rip cord.

mtr 75.00

117.0 Double outlet with shutter modular type TelephoneOutlets ( RJ – 11 ) with suitable size M.S./ PVCmodular boxes complete as req.

each 40.00

118.0 Supplying and fixing of krone telephone tag block,suitable for the multi core telephone cable andshall accommodate tin-plated phosphor bronzeconnectors, the connectors shall splice unskinnedcables up to 0.61 mm dia and shall be terminateboth incoming and out going lines, the tag blocksshall be mounted inside, water proof box andlocking arrangement and shall be fullyaccessible.The item is inclusive of providing andfixing of boxes in surface / recessed system etccomplete as required.

a 20 pair tag block each 3.00

SUB TOTAL - C RS 0.00

D LAN - ( LOCAL AREA NETWORKING ) FOR COMPUTERS :119.0 Providing , fixing and commisioning of 24-Port

Data Switch of (managed Layer-2 with 2-GigaPorts (10/100/1000) Make:D-Link, Netgear,Techroutes

each 1.00

120.0 Providing , fixing and commisioning of 16-PortData Switch of (managed Layer-2 with 2-GigaPorts (10/100/1000) Make:D-Link, Netgear,Techroutes

each 1.00

121.0 Providing , fixing and commisioning of 8-PortData Switch of (managed Layer-2 with 2-GigaPorts (10/100/1000) Make:D-Link, Netgear,Techroutes

each 1.00



122.0 Supply, Installation, Testing and Commissioningof 8 Port ( 100 base TX ) Cat-6 Patch / jack panelwith connectors, outlets and necessaryconnectivity complete as required.

each 1.00

123.0 Supply and Installation of following factoryfabricated patch cords ( UTP-CAT 6 ) completewith connectors on both sides.

a One Meter length. each 20.00

b Two Meter length. each 20.00

124.0 Supply and laying of Four Pair UTP CAT 6 LANcables in existing PVC Conduit / Floor trunkingwith RJ-45 connector if req.as req.includingLaying / Fixing of the 25mm dia size rigid pvcconduit 2.0 mm with conduit accessories likebend / junction box / on surface / in floor /recessed manner and making and making goodall the damages, painting, cleaning the site etccomplete as required as per site requirement andas directed.

mtr 800.00

125.0 Supply and fixing of modular type InformationOutlets with suitable size M.S./ PVC modularboxes complete with displacement connectors etcsuitable for CAT 6 UTP Cabling.insulation . OnePort.

each 45.00

126.0 Supply, Installation, Testing and Commissioningof the following 10 / 100 Mbps Rack mountedSwitch ( Auto managed ) suitable for auto-sensethe network speed of the connected nodes to runat either 10 Mbps or 100 Mbps. The port also autonegotiate between full / half duplex and cablecross over. a). 24 RJ-45 10 base –T / 100 Base –TX port.

each 2.00

127.0 Supply, Installation, Testing and Commissioningof the following Rack on existing wall / table /plateform etc i/c fixing of equipment/ accessoriesetc as required.9 U Rack.

each 2.00

128.0 Supply and Fixing of woodwn box / table for Rackinstallation with 19 mm board with mica (Matching interior ) etc complete as req.

each 2.00

129.0 Testing of STP cabling with scanner for all theNodes.

job 1.00

SUB TOTAL - F RSE LIGHTING FIXTURES

130.0 Supplying, installation and testing mirror optic fixture with lamp

130.1 Wipro WVP 24336 SGW with paralite P5 louvreor equivalent fixture of crompton / Philips i/c3X36 watt CFL lamp .

16.00 each



130.2 Wipro WCP 17236 SGWR ballast with paraliteP5 louvre or equivalent fixture of crompton /Philips i/c 2X36 watt CFL lamp .

28.00 each

130.3 Wipro GCP 10118 or equivalent fixture ofcrompton / Philips i/c CFL 18 watt lamp .

17.00 each

130.4 Wipro WVP 41236 fixture mirror optic surfacemounting fixture including 2x T8FTL lamps

10.00 each

130.5 Wipro GCP 10218 SGW with ballast orequivalent fixture of crompton / Philips i/c 2x18watt CFL lamp .

56.00 each

131.0 Supplying, installation and testing LED strip light 15.00 mtr

SUB TOTAL - G RS

F BUS BAR PANEL132.0 Providing, installation, testing & commissioning of

100 KVAr Automatic power factor panel suitablefor 160 KW electric supply load Vermin proof, dust proof duly fabricated out of MS/CRCA 16 SWGsheet fully compartmentalized, consisting ofswitch fuse units, busbar , contractor ,APFCrellay, indicating lamp , Amp. meter , volt meter &accessaries. Painting should be done afterdegreasing the sheet with powder coating ofrequired shade. Internal wiring shall be done withrequired size multi strand copper wire 1100 voltsgrade / PVC insulated alluminium strip & controlwiring for instruments

shall be done with required PVC insulatedmultistrand copper wire 1100 volt grade withproper ferruling for circuit identification & twoearthing terminal at the bottom and both terminalinter connected with G.I. strip earth bus. Allincomimg ,out going cable connection , earthconnection shall be done with requiredlugs,glands. The panel are comprising of followingitems :- (1) Capacitor ( crompton ) Heavy duty 10 KVAr - 7Nos.(2) Capacitor Heavy duty 5 KVAr - 4 Nos. (3) APFC rellay 12 Stage - 1 Nos.(4) Contactor & SFU,s with HRC 32 Amp.-12 Nos.

(5) Copper Bus bar 160 Amp. TPN - 1 setMetering Instruments :Voltmeter 0 - 500 V flush type - 1 Nos. Ammeter 0-200Amp. flush type C.T.operated-1Nos. C.T. 200/5 Amp.suitable for ammeter-3 Nos. Voltmeter selector switch- 1Nos.Ammeter selector switch-1 Nos.



indicating lamp LED type-15 Nos.Bakelite Kit Kat fuse 20 Amp.HRC fuse-3 Nosrubber matt 900x 450 - 2 nos 1.00 each

133.0 Installing testing and commisioning of existing DB/ SUB sigle phase / 3 phase using existingaccessories and ancillaries, MCCB, MCB , allinterconnection , making provision for installingpower factor panel, load balancing.

4.00 each

134.0 Installing testing and commisioning of existingmain bus bar panel using existing accessories andancillaries, MCCB, MCB , all interconnection ,making provision for installing power factorpanel,sub metering for Ist floor, load balancing.

1.00 each

RS

G FIRE DETECTION SYSTEM135.0 Providing, fixing, testing and commissioning of UL

listed and FM approved and as per IS standardsautomatic fire Alarm detectors including end ofline relay bases wherever required and manualcall points, electronic hooters & responseindicators etc. with supply of all material laborand T & P required for proper completion of workincluding providing connections to the detectors,manual call points , hooters, response indicators,fire alarm control panel etc. as required tocomplete the system. (MAKE : System Sensor /Apollo / Edward)

135.1 Ionization type smoke detectors as per IS : 11360 -1985 of dual chamber, 12/24 volt D.C, Ionizationsource - less than one micro curie maximumAmericium 241, twin visual alarm indicator(LED's) "Blink" in stand by and "steady" in alarmcomplete in all respects .

15.00 each

135.2 Fixed cum rate of rise temperature type heat

detectors as per IS : 2175 - 1988, 57 to 60o

(135oF.) (fixed) and 15

oF per minute rate of rise

twin visual alarm indicators (LED's) "Blink" instand by and "Steady" in alarm complete in allrespects .

5.00 each

135.3 Optical/Photoelectric type smoke detectors as perIS : 11360 - 1985 of photo-optic sensing chamber,12/24 volt D.C., twin visual alarm indicator "Blink"in stand by and "Steady" in alarm (LED's)complete in all respects .

10.00 each

136.0 Manual call points break glass type housed in 16SWG sheet steel housing . The manual call pointshould have an indicator, which should "blink" instand by condition.

2.00 each



137.0 Electronic Hooters - hooters shall also be able towork as public address system sounders housedin 16 SWG - sheet steel housing suitable forceiling and surface / recess mounting . ( Make :MPA / ASC )

4.00 each

138.0 Response indicators pulsating type suitable foroperation on 12/24 volts D.C, housed in 16 SWGsheet . The response indicator should have anindicator, which should "blink" in stand bycondition. (Make : MPA/ASC)

10.00 each

139.0 P/F and commissioning of 8-Zone main controlpanel and indicating panel, solid state modularcard type pulser, timer for dual stage alarm facilitywith indicators, stand by battery, battery charger,battery box etc. complete in all respect. (MAKE :Safezone / Minimax / Safeway / godrej ) )

1.00 set

140.0 Providing, fixing, testing 2X1.5 SQ MM Armoredcable Havells,Polycab, Finolex

200.00 Rmtr

SUB TOTAL - H RS

A CIVIL WORKS, FURNITURE & CHAIRS

B DB & INTERNAL WIRING

C TELEPHONE POINT :

D LAN - ( LOCAL AREA NETWORKING ) FORCOMPUTERS :

E LIGHTING FIXTURES

F BUS BAR PANEL

G FIRE DETECTION SYSTEM

RS

Signature & Seal of Bidder

ABSTRACT OF COST


Documents

Construction of Proposed Zonal Office at Paryawas … of Proposed Zonal Office at Paryawas Bhawnan, Arera Hills , Bhopal Date :- ...21.01. 2011 ISSUED TO :-. M/S .. DATE :- …………………