Configurator PRIMERGY RX900 S2 · 2019. 1. 10. · configuration default and set by BIOS up to 4 CPU configuration support non Hemisphere Mode only. Spare Mode Spare mode is not supported

PRIMERGY RX900 S2System configurator and order-information guide

Contents

Instructions

Configuration diagram

Configurator

0 0 System software

1 I Basic unit

2 II Processor

3 III Memory

4 IV USB devices / optical devices

5 V Hard disk drives

7 VI Internal SAS RAID Controller

8 VII External SCSI / SAS controller

9 VIII Fibre Channel controller

10 IX Communication / Network / CNA / Infiniband

11 X iRMC S2 advanced pack / TPM

12 XII Optional PSU / Power Cord

Change report

PRIMERGY Server

August 2014

System configurator and order-information guidePRIMERGY RX900 S2 Status 2014-07-31

Instructions

This document contains basic product and configuration information that will enable you to configure your system viaPC-/System-Architect

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect.

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.

Section III Memory, example

There are X memory slots which can be equipped with XXX MB

It is permissible to make up to X passes through the memory upgrade options

S26361-XXX-XXX S26361-XXX-XXX

Memory XXX MB Memory XXX MB

X times

max. X times per system max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x

Please note that there are information symbols which indicate necessary information.

Further information in the internet see:

http://ts.fujitsu.com/products/standard_servers/index.html (internet)

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx(extranet)

Prices and availability see price list and PC-/System-Architect.Subject to change and errors excepted.

Fujitsu PRIMERGY Server 2 of 18

http://ts.fujitsu.com/products/standard_servers/index.html

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx

System configurator and order-information guidePRIMERGY RX900 S2 Status 2014-07-31

Configuration diagram PRIMERGY RX900 S2

Basic Unit ( I )Processor ( II )

Memory ( III )

Ether 2 Ether 4 Ether 6

Service Ether 1 Ether 3 Ether 5

1. PSU 2. PSU 4. PSU ( 2+2 )

Hot Plug Redundant Power Supply (XII)

Option

Slot #3 PCIe 2.0 x8, short length

Slo

t #

9 P

CIe

2.0

x8

, sh

ort

le

ng

h P

HP

Included in the base configuration

10 Gb

Ether 7

CO

M

Slo

t #

13

PC

Ie 2

.0 x

8,

sh

ort

le

ng

h

Slo

t #

16

PC

Ie 2

.0 x

8,

sh

ort

le

ng

h Slot #2 PCIe 2.0 x8, short length

Slo

t #

12

PC

Ie 2

.0 x

8,

sh

ort

le

ng

h P

HP

Slo

t #

8 P

CIe

2.0

x8

, in

tern

al R

AID

3. PSU ( 2+1 )

Vid

eo

Slo

t #

15

PC

Ie 2

.0 x

8,

sh

ort

le

ng

h

Slo

t #

14

PC

Ie 2

.0 x

8,

sh

ort

le

ng

h

10 Gb

Ether 8



Slo

t #

17

PC

Ie 2

.0 x

4,

sh

ort

le

ng

h

US

B #

4


RE

AR

VIE

W

US

B #

1

US

B #

2

US

B #

3

Slo

t #

10

PC

Ie 2

.0 x

8,

sh

ort

le

ng

h P

HP

Slo

t #

11

PC

Ie 2

.0 x

8,

sh

ort

le

ng

h P

HP

Local View LCD Display

2.5" SAS #3

USB #5 2.5" SAS #4

Hard disk drives ( VI )Hard disk drives ( VI )

2.5" SAS #0

2.5" SAS #1 2.5" SAS #5 2.5" SAS #7

Operating

PanelDVD / Blue Ray



Extension slots:

external SCSI / RAID controller ( VIII ), Fiber Channel ( IX ), Communication/Network ( X )

FR

ON

T V

IEW

USB #7

USB #6

TO

P V

IEW

2.5" SAS #6

Slo

t #

17

P

CIe

2.0

x4

, sh

ort

le

ng

ht

Slo

t #

16

P

CIe

2.0

x8

, sh

ort

le

ng

ht

Video2.5" SAS #2

Slo

t #

14

P

CIe

2.0

x8

, sh

ort

le

ng

ht

Slo

t #

13

P

CIe

2.0

x8

, sh

ort

le

ng

ht

Slo

t #

12

P

CIe

2.0

x8

, sh

ort

le

ng

ht

PH

P

Slo

t #

11

P

CIe

2.0

x8

, sh

ort

le

ng

ht

PH

P

Slo

t #

15

P

CIe

2.0

x8

, sh

ort

le

ng

ht

CP

UM

EM

R #

3

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

1

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

8

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

7

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

6

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

4

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

2

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

5

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

Slo

t #

9

PC

Ie 2

.0 x

8,

sh

ort

le

ng

ht

PH

P

Slo

t #

8

PC

Ie 2

.0 x

8,

inte

rna

l R

aid

slo

t

Slo

t #

10

P

CIe

2.0

x8

, sh

ort

le

ng

ht

PH

P


PRIMERGY-Software Configurators and Release ListsStart "PRIMERGY RX900 S2" PRIMERGY RX900 S2 Status 2014-07-31

Section O SW Configurator 64 bit (EM64T / IA64)

with OEM-Software without OEM-Software

for PRIMERGY Server for PRIMERGY Server

OEM- SW is bound to HW and

For all SW products please refer to the corresponding is not allowed to be ordered

software configurator accessible via the Extranet under separately.

"Configuration & Tools, -All configurations, -Software, Exceptions: VMware SW,

URL see below. Citrix XenServer

VMware-Software

- VirtualCenter Management Server for any server released for Windows Server 2003

- Virtual Infrastructure 3 for PRIMERGY > except all mono PRIMERGY systems

- ESX2 for PRIMERGY RX/TX300S2, RX/TX600S3, BX620S2, BX630 Dual/Quad, BX630 8-way

Microsoft Hyper-V Server and System Center

- Microsoft System Center Virtual Machine Manager Workgroup Edition for any server released for Windows Server 2008 R2

- Microsoft System Center Essentials Management Suite for any server released for Windows Server 2008 SP2

- Microsoft Hyper-V Server 2008 R2

Microsoft - Windows Server 2008 R2 Server Licenses Linux - Software *) **)

- Windows Server 2008 R2 Datacenter # Open Enterprise Server ***)

- Windows Server 2008 R2 Enterprise only - SuSE Linux ES (OEM): LO

- EM64T - Red Hat EL (OEM): LO

Microsoft - Windows Server 2008 Server Licenses

- Windows Server 2008 Datacenter PRIMECLUSTER *)

- Windows Server 2008 Enterprise - Clustering

- - Load Balancing

only MultiPath, Duplex Data

EM64T Manager (DDM)

Windows, Linux (W-DDM) Details eg. version numbers are published

on the page referred to

*) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under

Manageability Software: V**) https://partners.ts.fujitsu.com/com/products/software/cluster%20technology/primecluster/Pages/default.aspx

- iRMC advanced Pack

only - RemoteView Software

EM64T - RemoteView Service Board **) Pay attention to release and order information in PRINCE -> Operating System

- RemoteView Diagnosis https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

- RemoteDeploy

***) Supply over distribution or procurement from FSC VP BC Software

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

for internal users: http://sp.ts.fujitsu.com/dmsp/docs/osrel.xlsx

for partners: https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

Continue with PRIMERGY

HW configurator


https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

System configurator and order-information guideStart PRIMERGY RX900 S2 PRIMERGY RX900 S2 Status 2014-07-31

Section I Basic unit

PRIMERGY RX900 S2 Baseboard with

- Intel E7-8800 chipset with serial QPI links (Quick Path Interconnect)

Rack unit 8U with - 16 PCI-Express Slots

- 2 hot-plug power supplys (additional PSU as option) 2x PCIe 2.0 x4 (half length)

- 4 CPUMemory Boards (CPUMEMR) (up to 4 additional boards optional) 14x PCIe 2.0 x8 (half length)

- LCD-Display for LocalView (Service Display) - 8x socket for CPUMEMR

- 8 bays for 2.5" SAS/SATA HDD`s - SATA controller on-board (for ODD)

- Power cord for rackmounting (ICE 320 C14->C19 plug) - iRMC S2 (integrated Remote Management Controller)

- no Rack- mounting kit included with graphics controller and 10/100Mbit Service LAN-port

- 6x 1GBit LAN Ports on-board (WOL-capable)

Base Unit S26361-K1403-V800 - 2x 10GBit LAN Ports on-board

- SAS RAID controller as option

- ServerView Suite Software package

incl. ServerStart, ServerBooks, Management Software and Updates

Interfaces:

Front side

- 3x USB 2.0

- 1x VGA (15 pin)

Rear Side

S26361-F2735-E111 S26361-F2735-E109 - 2x USB 2.0

No Rackmount-Kit option RMK RX900 - 1x VGA (15 pin)

Only for loose deliveries telescopic rails - 1x RS-232-C (serial, 9 pin)

No mounting in Racks possible - 6x onboardLAN RJ45, 2x onboardLAN SFP+, 1x ServiceLAN RJ45

max. 1x per system consisting of Internal

- 1 pair of telescopic rails - 1x internal USB Interfaces for backup device

with screws and washers - 1x internal port for UFM (uSSD) Module (Embedded vSphere ESXi 4.0)

no PS/2 connection for KB / Mouse (USB must be used instead)

1x per system

S26361-F2735-L109

RMK RX900 for Server Drop-in

S26361-F4530-E10 telescopic rails

S26361-F4530-E13 Mounting of RMK in symmetrical for loose delivery

Bracket 3U in asymmetrical racks racks

max. 1x per system (no support brackets needed)

max. 1x per system S26361-F2735-L7

Lateral cable management for RX900

S26361-F2735-E17 S26361-F2201-E20 mounted in asymmetrical racks

Cable management for RX900 2U cable arm behind systems for loose delivery

- for asym. PRIMECENTER racks - for symmetrical PCR M1

- not for 3rd party - or for 3rd party racks S26361-F2201-L20

max. 4x per system max. 3x per system 2U cable arm mounted behind systems

in symmetrical PCR M1 or 3rd party racks

for loose delivery

S26361-F2735-L31

PRIMECENTER S2 or M1 Racks Support Bracket 3 HU for mounting

in asymmetrical racks

1x per system

SNP:SY-F1647E301-P

Installation ex works for one "Rack-mounting ex factory"

server or subsystem. This service is to be ordered once

Hereby the rack will be delivered per installable server/storage

completely pre-mounted and subsystem, in order to get the

all wired connections are tested. server/storage subsystem

With racks 12U, 24U, 38U: mounted into the PRIMERGY racks.

Systems and components In case of the 46 U PRIMERGY Rack,

will be delivered installed in the rack this service has to be ordered,

With racks 46U: to get the mounting kits and the

Systems and components cables installed.

will be delivered separately

To be ordered only together with

a PRIMERGY PRIMECENTER rack

e.g.:

S26361-K826-V10x

refer configurator PC-Rack

max. 1x per System

A


System configurator and order-information guideA PRIMERGY RX900 S2 Status 2014-07-31

Section II Processor

4 CPU Memory Riser (CPUMEMR) and 4 CPU's must be configured as minimum, as maxmimum 8 are possible.

Later upgrading to a 6 or 8 processor system is also possible,

but requires possibly adding of PSU modules.

Extension CPUs must be identical to the already installed CPU´s.

4 CPU Memory Riser (CPUMEMR) are part of the

Base Unit S26361-K1403-V800

S26361-D3145-A100

CPUMEMR - CPU Memory Riser Board

A minimum of 4 CPUMEMR must be configured

- 1x CPU Socket for Intel Xeon processor E7-8800 series

with 1066 or 1333MHz Frontside Bus incl. passive heat sink

- 16 Memory DIMM Slots for DDR3 DIMM

- 4x SMI on each CPUMEMR

Max 8 CPUMEMR per System

Following CPU´s can be configured max. 8x per system

A minimum of 4 CPU´s must be configured

Xeon E7-8870 10C/20T 2.40GHz 30MB 6.4GT/s (130W) S26361-F4471-E887

4x Xeon E7-8860 10C/20T 2.26GHz 24MB 6.4GT/s (130W) S26361-F4471-E886




B


System configurator and order-information guideB PRIMERGY RX900 S2 Status 2014-07-31

Section III Memory

C

Memory configuration modes Interleaving Mode In RX900 S2 Memory Interleaving Mode is default and set by BIOS. Hemisphere Mode RX900 S2 supports Hemisphere Mode from 5 - 8 CPU configuration default and set by BIOS up to 4 CPU configuration support non Hemisphere Mode only. Spare Mode Spare mode is not supported in RX900 S2 Mirroring mode To use Mirroring Mode you have to order the Mirroring Mode option - S26361-F4472-E3 In mirroring mode, all data are copied within the main memory. Therefore only 50 % of the total memory is available for the operating system. Two types of mirroring modes are available: Intrasocket Mirroring - Memory Mirroring within CPUMEMR Memory will be mirrored from one memory controller to the other memory controller within the same CPU. Intrasocket Mirroring is possible for all CPU up to 4 CPUs. When enabling Memory Mirroring in case of 4 socket configuration, same DIMMs must be populated between DDR channel (ABCD) and (EFGH). Memory Mirroring is configured within CPUMEMR. This means same size of DIMMs must be populated as below - DIMM# (1B, 1D, 1F, 1H) should be same size of DIMMs. - DIMM# (1A, 1C, 1E, 1G) should be same size of DIMMs. - DIMM# (2B, 2D, 2F, 2H) should be same size of DIMMs. - DIMM# (2A, 2C, 2E, 2G) should be same size of DIMMs. Intersocket Mirroring - Memory Mirroring between CPUMEMR Memory will be mirrored from one memory controller to an memory controller on another CPU. Intersocket mirroring is only possible with 6 or 8 CPUs. When enabling Memory Mirroring in case of 6 or 8 socket configuration, all four DIMMs must be same size within CPUMEMR. - DIMM# (1B, 1D, 1F, 1H) should be same size of DIMMs. - DIMM# (1A, 1C, 1E, 1G) should be same size of DIMMs. - DIMM# (2B, 2D, 2F, 2H) should be same size of DIMMs. - DIMM# (2A, 2C, 2E, 2G) should be same size of DIMMs. In addition to this, same configuration must be kept between CPUMEMR (1,2), (3,4), (5,6), (7,8) because Memory mirroring will be configured between CPUMEMRs.

Memory Mirror for up to 4-S (Intra-Socket Mirroring)

Memory Mirror for 6-S and 8-S (Inter-Socket Mirroring)

Memory DIMM population Order


System configurator and order-information guideC PRIMERGY RX900 S2 Status 2014-07-31

Max. Capacity / Features

The system can be equipped with up to128 DIMMs (distributed on 8 CPUMEMRiser boards)

Each DIMM slot can optionally be equipped with 4GB, 8GB, 16GB or 32GB DDR3 DIMM modules,

so the maximal memory size is 4096GB with 32GB modules.

ECC with SDDC (Chipkill) is standard for RX900 S2.

Max. Memory Speed depends on CPU QPI Speed, but is limited to 1066 MHz.

S26361-F4472-E3

Mirrored Mode Installation

BIOS setup for Mirrored mode

Preinstallation ex factory

max. 1x per system

on special release as long as available as soon as available

S26361-F4523-E942 S26361-F4523-E943 S26361-F4523-E944 S26361-F4523-E945 S26361-F4523-E946 S26361-F4523-E947

Memory 16GB Memory 32GB Memory 32GB Memory 64GB Memory 128GB Memory 64GB

min. LV RDIMM (single rank) LV RDIMM (dual rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (dual rank)

2x consisting of consisting of consisting of consisting of consisting of consisting of

mem 4x 4GB modules 4x 8GB modules 4x 8GB modules 4x 16GB modules 4x 32GB modules 4x 16GB modules (4Gb)

upgr. occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots

max. 32x per system max. 32x per system max. 32x per system max. 32x per system max. 32x per system max. 16x per system




up to 3x14x LV RDIMM (single rank) LV RDIMM (dual rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (dual rank)

memory consisting of consisting of consisting of consisting of consisting of consisting of

upgrades 4x 4GB modules 4x 8GB modules 4x 8GB modules 4x 16GB modules 4x 32GB modules 4x 16GB modules (4Gb)

occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots


S26361-F4524-E100 Upgrade path is

CPUMEMR - CPU Memory Riser Board - 2x CPUMEMR and 2 CPUs

A minimum of 4 CPUMEMR must be configured for CPUMEMR slot 5 and 6

2 or 4x - 1x CPU Socket for Intel Xeon processor E7-8800 series - 4x CPUMER and 4 CPUs

with 1066 or 1333MHz Frontside Bus incl. passive heat sink for CPUMEMR slot 5 to 8

- 16 Memory DIMM Slots for DDR3 DIMM

Other CPUMEMR upgrades

max. 4 CPUMEMR per System are not supported!

One of the following CPU´s must be configured

per CPU Memory Riser Board

Xeon E7-8870 10C/20T 2.40GHz 30MB 6.4GT/s (130W) S26361-F4471-E887 2 or 4x Xeon E7-8860 10C/20T 2.26GHz 24MB 6.4GT/s (130W) S26361-F4471-E886







LV RDIMM (single rank) LV RDIMM (dual rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (dual rank)

up to 16x consisting of consisting of consisting of consisting of consisting of consisting of

memory 4x 4GB modules 4x 8GB modules 4x 8GB modules 4x 16GB modules 4x 32GB modules 4x 16GB modules (4Gb)

upgrades occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots


D


System configurator and order-information guide

D PRIMERGY RX900 S2 Status 2014-07-31

Section IV USB devices / optical devices

Setup RX900 S2 by SV Installation Manager is supported with following configurations:

built in CD/DVD or USB CD/DVD, no Floppy disk drive:

UNC Network share reachable

DVD Dummy - C26361-K644-C640-*-Y155

built in DVD slot if no DVD/Blue Ray

is requested

S26361-F3531-E2 S26361-F3269-E2 S26361-F3641-E2

Blu-ray Combo slim SATA DVD-RW supermulti slim SATA Blu-ray Triple Writer slim SATA

6x BD-ROM, 16x DVD, 40x CD all formats, DUAL/DL, DVD-RAM 6x BD-RW, 8x DVD, 24x CD

1x BD DL and all CD/DVD formats only W2K, W3K and Linux BD DL and all CD/DVD formats

0.5 x 5.25", black bezel 0.5 x 5.25", black bezel 0.5 x 5.25"

max. 1x per system max. 1x per system max. 1x per system

E


System configurator and order-information guideE PRIMERGY RX900 S2 Status 2014-07-31

Section V Hard disk drives

HDD SAS 6Gb/s 2.5" with hot plug/hot replace tray

300GB 10000rpm,<4,5ms, 16MB Cache S26361-F4482-E130 configuration of 450GB 10000rpm,<4,5ms, 16MB Cache S26361-F4482-E145 SAS-HDDs requires600GB 10000rpm,<4,5ms, 16MB Cache S26361-F4482-E160 SAS RAID controller900GB 10000rpm,<4,5ms, 32MB Cache S26361-F4482-E190 1,2TB 10000rpm,<4,5ms, 64MB Cache S26361-F5247-E112 as soon as available

146GB 15krpm,<4,5ms, 32MB Cache S26361-F4482-E514

300GB 15krpm,<4,5ms, 32MB Cache S26361-F4482-E530

500GB 7.2krpm,<9,5ms, 64MB Cache S26361-F5228-E500

1TB 7.2krpm,<9,5ms, 64MB Cache S26361-F5228-E100

max. 8x per system

Solid State Disk, Mainstream Endurance*

SSD SAS 6Gb/s MLC 2.5" with hot plug/hot replace tray

100GB, Enterprise Performance S26361-F4581-E100 as long as stock

200GB, Enterprise Performance S26361-F4581-E200 as long as stock

max. 8x 400GB, Enterprise Performance S26361-F4581-E400 as long as stock

SSD SAS 12Gb/s 2.5" with hot plug/hot replace tray as soon as available

200GB, Enterprise Performance S26361-F5297-E200 Interface SAS12Gb/s and SAS 6Gb/s.

400GB, Enterprise Performance S26361-F5297-E400 SAS 12Gb/s support is not released

max. 8x 800GB, Enterprise Performance S26361-F5297-E800

1.6TB, Enterprise Performance S26361-F5297-E160 *) SSD Mainstream Endurance

10DWPD over 5y

max. 8x per system

SSD SAS 2.5" SLC

as long as stock as long as stock

S26361-F4541-E100 S26361-F4541-E400

SSD SAS 100GB, SLC SSD SAS 400GB, SLC

Solid State Disk Solid State Disk

SAS 6Gb/s SAS 6Gb/s

Enterprise Perfomance Enterprise Perfomance

hot plug/hot replace tray hot plug/hot replace tray

max. 8x per system max. 8x per system

Section VI PCIe-SSD

S26361-F4522-E781 S26361-F4522-E121 loose delivery: S26361-F4522-L781/L121

PCIe-SSD 785GB MLC PCIe-SSD 1.2TB MLC

ioDrive2 785GB ioDrive2 1.2TB

max. 4x PCIe 2.0 PCIe 2.0

25nm Lithography 25nm Lithography

PCIe x4, Low Profile PCIe x4, Low Profile


F



F PRIMERGY RX900 S2 Status 2014-07-31

Section VI internal SAS RAID 0/1 and RAID5 Controller for HDD´s

S26361-F3554-E512

RAID Ctrl SAS 6G 8port internal

Based on chip LSISAS2108 Modular RAID controller must be ordered,LSI MegaRAID if at least one internal HDD is configured!512MB Cache with ECC

1x RAID 0, 1, 10, 5, 50, 6, 60

optional BBU

Support for 3Gb/s and 6Gb/s

SATA and SAS hard drives

PCIe x4

Low-profile MD2 form factor

max. 1x per system

S26361-F3257-E270

Cache Battery Backup Unit BBU max. 2x per system possible

with 70cm cable set for loose delivery please order


G



G PRIMERGY RX900 S2 Status 2014-07-31

Section VII external SAS controller

The number of max. I/O PCIe controllers highly depends

on the numer of CPUMEMR!

The following Table describes the max. number of PCIe

controller slots

CPUMEMR PCIe slots PCIe slots (PHP)

The showm max. numer of each controller is valid,as far

as the numer of PCIe slots are available also.

A. SAS controller for external backup drives

S26361-F3271-E2

SAS Controller 3Gb/s 8 port

LSI SAS3442E-R

max. 3x PCIe x4, The 3Gb/s SAS Controller is basically for SX10 S2

int: 4 port due to the fact that SX10 S2 supports 3Gb/s only.

ext: 4 port We have to withdraw the controller because it can't

max. 3x per system run under UEFI BIOS.

We will release the controller with UEFI support soon.

Same controller but new order number!

B. SAS controller for external backup drives

S26361-F3628-E1

SAS Controller 6Gb/s 8 port

LSI SAS9200-8e

max. 3x PCIe

ext: 8 port

max. 3x per system

C. SAS RAID controller for JBOD subsystems

S26361-F3593-E1

8 port SAS RAID Controller The RAID controller can be used only for the connection of

LSI external subsystems (FibreCAT SX40, Eternus JX40)

MegaRAID SAS9280-8e 6Gb/s

512MB Cache with ECC Cables for the connection from the RAID Controllers

RAID 0, 1, 10, 5, 50, 6 & 60 to the subsystem see configurator FibreCAT SX40

without iBBU The usage of the internal SAS ports is not supported !

SAS 6Gb/sec

max. 2x 8 port external

PCIe x4, 167mm

full height bracket

max. 2x per system

S26361-F3257-E270

Cache Battery Backup Unit BBU max. 2x per system possible

with 70cm cable set for loose delivery please order


as soon as available

S26361-F3713-E3

RAID Ctrl SAS 6G 8port external

LSI MegaRAID SAS 9285-8e

1GB Cache with ECC

RAID 0, 1, 5, 6, 10, 50 & 60

without FBU

SAS 6Gb/sec

8 port external

2x PCIe 3.0 x8, MD2 form factor

full height bracket

max. 2x per system

S26361-F3669-E170 S26361-F3669-L110

Flash Backup Unit Flash Backup Unit

with 70cm cable set with 25cm, 55cm, 70cm cable set

max. 1x per Contr., 2x per system max. 1x per Contr., 2x per system

as soon as available as soon as available

S26361-F3669-E661 S26361-F3669-L661

RAID Advanced Software Options RAID Advanced Software Options

License Activation Key License Activation Key

for CacheCade 2.0 and FastPath for CacheCade 2.0 and FastPath

for 1 Controller for 1 Controller

H

0

4

4

4

6

8

7

7

12



PRIMERGY RX900 S2 Status 2014-07-31H

Section VIII Fibre Channel




controller slots


4 7 0

6 7 4

8 12 4



S26361-F3961-E1 S26361-F3961-E2 The LPe12* supports Boot from FC

8GBit/s FC Controller 8GBit/s FC Controller

Emulex Emulex loose delivery:

LPe1250, full height bracket LPe12002, full height bracket Single channel S26361-F3961-L1

8x 1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller Dual Channel S26361-F3961-L2

LC Interface for 50µm Fiber LC Interface for 50µm Fiber with mounted LP bracket

PCIe x4, 170mm PCIe x4, 170mm FH bracket is not included


The LPe16* supports Boot from FC

S26361-F4994-E1 S26361-F4994-E2


Emulex Emulex loose delivery:

LPe16000, low profile bracket LPe16002, low profile bracket Single channel S26361-F4994-L501

8x 1 channel 16GBit/sec FC Contr. 2 channel 16GBit/sec FC Contr. Dual Channel S26361-F4994-L502

LC Interface for 50µm Fiber LC Interface for 50µm Fiber contains LP and FH brackets.

PCIe x8, 170mm PCIe x8, 170mm


S26361-F3631-E1 S26361-F3631-E2 The QLE256x do not support Boot via FC


Qlogic Qlogic loose delivery:

QLE2560, full height bracket QLE2562, full height bracket Single channel S26361-F3631-L1

8x 1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller Dual Channel S26361-F3631-L2

LC Interface for 50µm Fiber LC Interface for 50µm Fiber with mounted LP bracket

PCIe x4, 170mm PCIe x4, 170mm FH bracket is not included


All controllers for the connection of external storage systems are delivered without cables.

For the configuration of external cabling see the configurator for external storage systems.

For Fibre Channel SAN also other componets like switches, SFPs and optical wires are

orderable (for details see price liste)

I



I PRIMERGY RX900 S2 Status 2014-07-31

Section IX Communication / Network / CNA / Infiniband




controller slots


4 7 0

6 7 4

8 12 4



on-board LAN Controller

3x Dual Gbit Ethernet Contr. on-board Teaming: Failover, Load Balancing

Intel 82576 NS (Kawela wo/IPsec) The Intel LAN Controllers Pro 1000MT, 1000MF, 1000PT, 1000PF

can be used with the on-board controller in Teaming Mode

ext: 6x RJ45 connector, Cat 5 Two onboard LAN ports can likewise educate a team.

1x Dual 10Gbit Ethernet Contr. on-board

Intel 82599 (Niantic wo/IPsec) Onboard Ethernet Controller

The onboard controller are configured in the Basic Unit already.

ext: 2x SFP+ connector

S26361-F3986-E3

SFP+ Module MMF 10GbE LC

SFP+ module for 10 Gbit The SFP+ Module is also available as loose delivery

Ethernet FO cabling S26361-F3986-L3

ext:LC-connector Instead SFP+ modules, SFP+ twinax cables from

max. 2x per adapter switch vendors may be used

V:TWX Connector-PY

for all Twinax (FJ,BR,CI)

2x max. 2x per controller

S26361-F3989-E600 *) S26361-F3873-E500 *) S26361-F4571-E500 *) *) in SA only

SFP+ active twinax cable SFP+ active twinax cable SFP+ passive twinax cable shown in

customized twinax cable for customized twinax cable for customized twinax cable for cabling view

full rack setup ex factory full rack setup ex factory full rack setup ex factory

cable length is selected by cable length is selected by cable length is selected by

requirement in the factory requirement in the factory requirement in the factory

Fujitsu branded cable Brocade branded cable Cisco branded cable

max. 2x per controller max. 2x per controller max. 2x per controller

separate orderable 10Gb Ethernet cables

S26361-F3989-L102 SFP+ aktives Twinax Kabel Fujitsu 2m



S26361-F3873-L501 SFP+ aktives Twinax Kabel Brocade 1m



S26361-F4571-L101 SFP+ passives Twinax Kabel Cisco 1m



S26361-F4571-L107 SFP+ aktives Twinax Kabel Cisco 7m


1Gbit/s Ethernet Adapter

S26361-F4610-E2 S26361-F4610-E4

(I350-T2) (I350-T4)

Gigabit Ethernet Controller Dual 1000TX Gigabit Ethernet Controller Quad 1000TX

PLAN CP 2x1Gbit Cu Intel I350-T2 PLAN CP 4x1Gbit Cu Intel I350-T4

Intel Powerville based 2 port Server Ad. Intel Powerville based 4 port Server Ad.

PCIe x4, Low Profile PCIe x4, Low Profile

full height (FH) bracket full height (FH) bracket

ext: for RJ45-plug, Cat 5 ext: for RJ45-plug, Cat 5


8x

while stocks last while stocks last while stocks last

S26361-F3740-E1 S26361-F3739-E1 S26361-F3242-E1

(D3035) (D3045) (Sheepshead Bay)

Gigabit Ethernet Controller Dual 1000TX Gigabit Ethernet Controller Quad 1000TX Gigabit Ethernet Contr. 1000SX

Eth Ctrl 2x1Gbit Cu PCIe x4 D3035 Eth Ctrl 4x1Gbit Cu PCIe x4 D3045 Eth Ctrl 1x1Gbit PCI-e Pro/1000PF LC

Intel Powerville based 2 port Server Ad. Intel Powerville based 4 port Server Ad. Intel PRO/1000 PF Server Adapter

PCIe x4, Low Profile PCIe x4, Low Profile PCIe x4

full height (FH) bracket full height (FH) bracket ext:LC-connector

ext: for RJ45-plug, Cat 5 ext: for RJ45-plug, Cat 5 max. 8x per system


Loose delivery with FH and LP bracket:

I350-T2 S26361-F4610-L502

I350-T4 S26361-F4610-L504

D3035 S26361-F3740-L501

D3045 S26361-F3739-L501

Loose delivery with LP bracket:

Sheepshead Bay S26361-F3242-L1

I1


System configurator and order-information guideI1 PRIMERGY RX900 S2 Status 2014-07-31

10GbE 2-Port SFP+ for MMF Module 10Gbit/s Ethernet Adapter

S26361-F3629-E2 S26361-F3752-E2

(D2755) (Intel X540-T2)

10 Gigabit Ethernet Contr. dual port SFP+ Eth Ctrl 2x10GBase-T

Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+ Intel Twinville based 2 port Server Ad.

Intel Niantic based dual port 10Gb NIC PCIe x4, Low Profile

PCIe x8, Low Profile, Full Height Bracket FullHeight (FH) bracket

ext: 2x SFP+ cage ext: for RJ45-plug, Cat 6


S26361-F3986-E3 S26361-F3986-E4 V:TWX Connector-PY

SFP+ Module MMF 10GbE LC SFP+ Module SMF 10GbE LC for all Twinax (FTS,BR,CI)

SFP+ module for 10 Gbit SFP+ module for 10 Gbit max. 2x per controller

8x Ethernet 50µm FO cabling Ethernet 9µm FO cabling

ext:LC-SR-connector ext:LC-LR-connector

max. 2x per controller max. 2x per controller

The SFP+ modules are also available as loose delivery

S26361-F3986-L3

S26361-F3986-L4

Instead SFP+ Modules, SFP+ twinax cables from the switch vendors may be used

S26361-F3989-E600 *) S26361-F3873-E500 *) S26361-F4571-E500 *)

SFP+ active twinax cable SFP+ active twinax cable SFP+ passive twinax cable

customized twinax cable for customized twinax cable for customized twinax cable for *) in SA only

full rack setup ex factory full rack setup ex factory full rack setup ex factory shown in

cable length is selected by cable length is selected by cable length is selected by cabling view



max. 2x per controller max. 2x per controller max. 2x per controller


S26361-F3989-L102 SFP+ active Twinax Cable Fujitsu 2m

The controller D2755 is delivered without SFP+ modules for optical S26361-F3989-L105 SFP+ active Twinax Cable Fujitsu 5m

cables, these must be ordered separately. S26361-F3989-L110 SFP+ active Twinax Cable Fujitsu 10m

Loose delivery options (FH and LP bracked included) S26361-F3873-L501 SFP+ active Twinax Cable Brocade 1m

D2755 S26361-F3629-L502 S26361-F3873-L503 SFP+ active Twinax Cable Brocade 3m

X540-T2 S26361-F3752-L502 S26361-F3873-L505 SFP+ active Twinax Cable Brocade 5m

S26361-F4571-L101 SFP+ passive Twinax Cable Cisco 1m



S26361-F4571-L107 SFP+ active Twinax Cable Cisco 7m

S26361-F4571-L110 SFP+ active Twinax Cable Cisco 10m

F) Fibre Channel over Ethernet

S26361-F3592-E2

2 x 10GBit/s CNA

Emulex

OCe10102 Loose Delivery: S26361-F3592-L2

2 channel 10GBit/sec CNA

SFP+ Cage

PCIe x8, 170mm

max. 8 per system

S26361-F3592-E108 V:TWX Connector-PY The SFP+ Module is also available as loose delivery

SFP+ Module MMF 10GbE LC for all Twinax (FTS,BR,CI) S26361-F3591-L108

SFP+ module for 10 Gbit max. 2x per adapter Instead SFP+ Modules, SFP+ twinax cables from

8x Ethernet FO cabling the switch vendors may be used

ext:LC-connector

max. 2x per adapter

2x

S26361-F3989-E600 *) S26361-F3873-E500 *) S26361-F4571-E500 *)

SFP+ active twinax cable SFP+ active twinax cable SFP+ passive twinax cable

customized twinax cable for customized twinax cable for customized twinax cable for *) in SA only

full rack setup ex factory full rack setup ex factory full rack setup ex factory shown in

cable length is selected by cable length is selected by cable length is selected by cabling view



max. 2x per adapter max. 2x per adapter max. 2x per adapter













I2


System configurator and order-information guideI2 PRIMERGY RX900 S2 Status 2014-07-31

G) Infiniband HCA's

S26361-F4475-E102

IB HCA 40Gb 1 port QDR

IB HCA 1x 40Gb Low Profile PCIe form factor with exchangeable Full Height (FH)

PCIe 2.0 (5,0GT/s) or Low Profile (LP) bracket

PCIe x8, low profile

ext: 1x QSFP-connector

max.2x per system

S26361-F3996-E101 S26361-F3996-E103 If additional length of copper cable or optical cable are needed,

InfiniBand Cu Cable 40Gb InfiniBand Cu Cable 40Gb then they must be ordered from the cable vendor directly

QSFP, 1m QSFP, 3m

max. 1x per adapter max. 1x per adapter

max. 2x

while stock lasts

S26361-F4475-E202

IB HCA 40Gb 2 port QDR

IB HCA 2x 40Gb Low Profile PCIe form factor with exchangeable Full Height (FH)

PCIe 2.0 (5,0GT/s) or Low Profile (LP) bracket

PCIe x8, low profile

ext: 2x QSFP-connector

max. 2x per system

S26361-F3996-E101 S26361-F3996-E103 If additional length of copper cable or optical cable are needed,

InfiniBand Cu Cable 40Gb InfiniBand Cu Cable 40Gb then they must be ordered from the cable vendor directly

QSFP, 1m QSFP, 3m

max. 2x per adapter max. 2x per adapter

J



K PRIMERGY RX900 S2 Status 2014-07-31

Section XI System Management Products (RemoteView)

S26361-F1790-E241

iRMC S2 advanced pack

integrated remote management controller

activation key for

graphical console redirection

and remote media redirection

max. 1x per system

Be aware of import restrictions!

S26361-F3552-E1 Loose delivery for later

TPM Module integration possible for customer.

Trusted Platform Module on Motherboard

Use according to import restrictions S26361-F3552-L1

max. 1x per system TPM Module add-on kit

for later integration (loose delivery)

Trusted Platform Module on Motherboard

Use according to import restrictions

max. 1x per system

Section XII Optional PSU / power cords / region Kits

Base system will be shipped with two PSUs and power cords ICE320 C14->C19

for rack installation. Country specific power cords are not required.

In addition to the base configuration with two power supplies units (1+1 redundancy)

max. two addition PSU´s can be installed.

Configurations with more than 4 CPUMEMR require

1 additional PSU for PSU redundancy (2+1 redundancy).or

2 additional PSU for phase redundancy (2+2 redundancy)

For later upgrade the following kit is available:

S26113-F608-E10 S26113-F608-L10

3./4. power supply module 3./4. power supply module

2000W, hot plug 2000W, hot plug 2x for 2+1 redundancy for 2+1 redundancy

for 2+2 redundancy for 2+2 redundancy

incl. 1x power cord ICE320 C14->C19 (2,5m) incl. 1x power cord ICE320 C14->C19 (2,5m)


S26361-F1452-E100 S26361-F1452-E110 S26361-F1452-E130

REGION KIT APAC/EMEA/India REGION KIT JP REGION KIT America

For Shipments to Asia pacific, For Shipments to Japan regions For Shipments to America

EMEA or India regions

1x per system 1x per system 1x per system

End PRIMERGY RX900 S2



PRIMERGY RX900 S2 Status 2014-07-31

Change Report

Date Order number Changes

2014-04-03 corrected Basic unit order number S26361-F4530-E10 and E13

2014-03-19 S26361-F4610-E4 added Intel I350-T4

2014-03-19 S26361-F4610-E2 added Intel I350-T2

2014-03-18 S26361-F3739-E201 phase out

2014-03-18 S26361-F3740-E201 phase out

2014-03-18 S26361-F3610-E202 EOL

2014-01-31 S26361-F5247-E112 New 1.2TB 2.5" SAS 10K HDD added.

2014-01-31 S26361-F5303-* New SATA SSDs added.

2014-01-31 S26361-F5297-* New SAS SSDs added.

2013-10-18 Optional USB Comps no longer available

2013-08-05 S26361-F4482-E* HDD Cache updated.

2013-03-25 S26361-F3713-E3 RAID Ctrl SAS 6G 8Port ex 1GB LSI

2013-03-25 S26361-F3669-E661/L661 RAID advanced SW options added - for RAID Ctrl SAS 6G 8port external

2013-01-08 S26361-F5228-E*** New 2.5" BC-SAS 7.2K HDD

2012-11-22 S26361-F3669-E1 removed

2012-10-18 S26361-F5423-E647 Added 64 GB Memory

2012-09-28 S26361-F4541-E200 EOL - SSD SAS 200GB, SLC

2012-08-16 S26361-F4523-E946 Add 128GB / 4x32GB Memory

2012-07-25 S26361-F4581-Exxx Add SSD SAS MLC

2012-07-06 S26361-F3669-L100 Loose delivery TFM module added (UJ)

2012-04-24 S26361-F3669-E1 new int. SAS RAID Controller added

2012-02-29 S26361-F3257-E270 Change from E170 --> E270 and L110 --> L210

2012-02-20 PCIe-SSD Count changed from 2 > 4

2012-01-30 S26361-F3641-E2 new Blue-ray Triple Writer added

2011-12-21 S26361-F4482-E114 SAS HD 6G 144GB - no longer available

2011-10-30 S26361-F4541-Ex00 new SAS SSD with 100, 200, 400 GB added - as soon as available

2011-10-10 S26361-F2201-E20 Cable arm adjusted

2011-10-01 S26361-F3298-E64 64 GB SSD - no longer available

2011-07-01 First Release


Documents

Configurator PRIMERGY RX900 S2 · 2019. 1. 10. · configuration default and set by BIOS up to 4 CPU configuration support non Hemisphere Mode only. Spare Mode Spare mode is not supported