1www.yrco.co.nz

ConcretingEQUIPMENT

Power Trowels

Vibrators

Saws and Cutters

Diamond Blades

Surface Preparation

Construction Lasers

Finishing Tools

Screeds

Mixers

Breakers

METAL PRODUCTS INC. ®

PROFESSIONAL SERIES

2

“the concreting specialists”

Sole New Zealand distributor for Mikasa, Subaru Robin, Whiteman, Edco, Wagman and Husqvarna Construction Products, we have over 31 years of experience supplying a wide range of machines and equipment for the hire and construction industries.

RIDE-ON POWER TROWELSModel HHNTrowels Dual 5 bladed Trowelling width 2310mmTrowelling speed 40-170rpmDimensions (mm) 2410L 1220W 1170HWeight 535kgEngine Diesel 34.0hp

Model HHXTrowels Dual 5 bladed Trowelling width 2310mmTrowelling speed 40-170rpmDimensions (mm) 2490L 1270W 1370HWeight 658kgEngine Diesel 34.0hp

Model HTXTrowels Dual 5 bladed Trowelling width 2330mmTrowelling speed 10-160rpmDimensions (mm) 2410L 1220W 1450HWeight 841kgEngine Diesel 55.0hp

Model STXTrowels Dual 6 bladed Trowelling width 2970mmTrowelling speed 10-130rpmDimensions (mm) 3180L 1650W 1450HWeight 1030kgEngine Diesel 55.0hp

CONTENTSRide-On Power Trowels 2

Walk-Behind Power Trowels 3

Plate Compactors 4 Concrete Mixers

Concrete Vibrators 5

Diamond Blades 6 Construction Lasers

Power Cutters 7 Road & Floor Saws

Masonry Saws 8 Surface Preparation Wet & Dry Vacuum

Power & Hand Screeds 9 Breakers & Tool Bits

Trowel Blades 10 Finishing Tools

Waterblasters 11 Wheel Barrows Accessories

SALES SPECIALISTSDiamond Tools, Concreting Equipment & Associated Products:

Upper North Island Mobile 021 501 143 Lower North Island Mobile 021 610 838

Genie Access Equipment & Genie TelehandlersMobile: 021 999 768

Rubber Tracks and GEHL Skid Steer LoadersMobile 021 504 899

NORTHLANDTerritory Sales: Mobile 021 507 951

AUCKLAND Territory Sales: Mobile 021 616 875 Territory Sales: Mobile 021 501 143 Territory Sales: Mobile 021 877 384

WAIKATO/BAY OF PLENTYTerritory Sales: Mobile 021 725 169

WELLINGTON REGIONTerritory Sales: Mobile 021 729 005 Territory Sales: Mobile 021 610 838

SOUTH ISLANDCanterbury, Nelson & West Coast Regions: Mobile 021 503 683 Otago, Central, Southland Regions: Mobile 021 405 180

AUCKLAND HEAD OFFICE

CHRISTCHURCH BRANCH

HTXSTX

HHNHHX

These hydraulic ride-on trowels have all the features contractors demand from their finishing equipment. The innovative SmartPitch, Power Management and Cruise Control enables maximum performance.

3

Designed to start finishing sooner, even when surface is still wet. It weights only 10.8kg, and is pole driven from outside the pour area. Pole lengths can be added up to 9.0m (30’).

Model PPFTrowel diameter 860mmTrowelling speed 0-65rpmBlades/Pitch 4, at 5ºWeight 10.8kgEngine 22cc

WALK-BEHIND POWER TROWELS

Model ECO900Trowels 4 bladed Trowelling width 915mmTrowelling speed 0-120rpmDimensions (mm) 2050L 950W 1050HWeight 84kgEngine Subaru EX17, 6.0hp

Model C-Series 24”Trowels 4 bladed Trowelling width 610mmTrowelling speed 70-130rpmDimensions (mm) 1555L 610W 921HWeight 57kgEngine Subaru EX17, 6.0hp

Model J-Series 36”Trowels 4 bladed Trowelling width 915mmTrowelling speed 90-155rpmDimensions (mm) 1789L 915W 1044HWeight 86kgEngine Subaru EX17, 6.0hp

Model B-Series 46”Trowels 4 bladed Trowelling width 1170mmTrowelling speed 60-130rpmDimensions (mm) 1910L 1170W 1044HWeight 110/113kgEngine Subaru EX27 9hp, EX35 12hp

Model HD-Series 48”Trowels 4 bladed Trowelling width 1219mmTrowelling speed 35-180rpmDimensions (mm) 1940L 1020W 980HWeight 143kgEngine 12.0hp

The world’s number one selling trowels for over 70 years. Amazing balance and control and with many features. Models available to suit small confined areas up to large slab surface areas.

Heavy-duty construction. Easy and rapid finishing. Dead man’s switch. Optional clip-on blades.

PROFESSIONAL SERIES Engine

C-Series 24”

J-Series 36”

HD-Series 48”

Free spinning guard ring for close corner and edge finishing

POWER POLE FINISHER

B-Series 46”

4

Model MVC88GEWeight 82kg Plate Size (mm) L525 x W500Engine Subaru EX17, 6.0hp Cent Force 15.0 kN Frequency 6000vpm

Model MVCF60RWeight 65kg Plate Size (mm) L540 x W350Engine Subaru EX13, 4.5hp Cent Force 10.1 kN Frequency 6200vpm

FORWARD PLATE COMPACTORSIdeal for base course compaction, roads and footpaths, general repairs, construction work and landscaping. Long life and low maintenance and powered by industrial Subaru petrol engines. Water tank available for all models.

CONCRETE MIXERSVERSATILE ALL-PURPOSE MIXERS. Can be wheeled to pouring site. Petrol & electric models.

TOWABLE & NON-TOWABLE

Towable & Non-TowableCapacity 2 cu. ft Engine Subaru EX13 4.5hpMotor 1/3hp, single phaseWheels Pneumatic

Petrol and Electric models available.

Baromix (Petrol & Electric)Mix capacity 2 cubit footEngine Subaru 2.0hpMotor 240V Single phaseWeight 65kg

PROFESSIONAL SERIES

Both come with a swivel stand

TOWABLE LARGE CAPACITY SITE MIXER

AT250 (Petrol) AT350 (Petrol or Diesel)

Capacity 250Ltrs / 350 Ltrs Engine Subaru Petrol 4.5 hp Diesel 4.8hpWeight 250kg / 305kgWheels Pneumatic tyres (not for road)

Altrad BWE60 (Electric)

Mix capacity 130LMotor 240V Single phaseWeight 48kg

Folding handle on the 45kg and 60kg models.

Models fitted with the VAS handle have greatly reduced hand vibration.

Engines

Model MVC50GWeight 60kg Plate Size (mm) L460 x W345Engine Subaru EX13, 4.5hp Cent Force 9.8 kN Frequency 5800vpm

Model MVC40GWeight 45kg Plate Size (mm) L420 x W292Engine Subaru EH09, 2.8hp Cent Force 7.2 kN Frequency 6200vpm

Model MVC60RVASWeight 72kg Plate Size (mm) L570 x W350Engine Subaru EX13, 4.5hp Cent Force 10.1 kN Frequency 5600vpm

Model MVCF80RVASWeight 82kg Plate Size (mm) L570 x W450Engine Subaru EX17, 6.0hp Cent Force 13.7 kN Frequency 5600vpm

Model MVCF82VEWeight 84kg Plate Size (mm) L570 x W450Engine Subaru EX17, 6.0hp Cent Force 13.7 kN Frequency 5600vpm

5

CONCRETE VIBRATORS

Model GE5LEngine Subaru EX17, 6.0hp, OHC Flexible shaft 6 metresVibrator heads 28, 38, 45 or 70mmWeight 47kg

MGX SERIES Four models. Double insulated. Choice of shafts lengths & vibrator heads.

Model CV-2E CV-3EMotor 2.0hp, 7.5amps 3.0hp, 10amps Shaft lengths 1.0m, 2.1m, 4.3m, 6.4mVibrator heads 35mm, 43mm, 54mm

Model BP-35 BP-50aEngine 1.75hp 2.50hp Head size (dia) Up to 38mm Up to 63mmWeight 8.6kg 11.0kg

MULTIQUIP ELECTRICFor medium to high-slump concrete.

PROFESSIONAL SERIES‘OZTEC’ ELECTRIC SERIES

‘OZTEC’ INTERCHANGEABLE SHAFTS & HEADS

PROFESSIONAL SERIES

‘OZTEC’ PETROL SERIES

Specs 1.8 OZ 3.2 OZ

Flexible shaft 1m, 1.8m, 2.15m, 4.3m, 6.4mSteel heads (L) 20mm, 25mm, 30mm, 38mm, 45mm, 50mm, 62mm Rubber heads (L) 60mm, 70mm

Power units - 4 models. Lightweight and compact, with adjustable shoulder strap.

Two models available. Powerful and reliable offering the operator incredible comfort and manoeuvrability.

RubberHead Steel Heads Rubber Tips

Selection of vibrator shaft, heads and tips available.

Engines

Heads have case hardened tips, oil filled, with extra thick shells to resist wear.

Model MGX28.1 MGX32.2Motor 3/4hp, 230v 3/4hp, 230vShaft lengths 748mm 2mVibrator heads 28mm, 32mmHead weights 4.3kg, 4.7kg Model 1.8 OZ 3.2 OZ

Motor 1.75hp, 7.5amps 3.0hp, 9.5ampsHead size (max) 45mm 70mm

3.2OZ

BP35

PENDULOUS TYPEMounted in sturdy roll bar frame.

6

HUSQVARNA 400 T15 SERIESFull 15mm diamond height for ultimate life and a unique turbo style segment for extreme speed. Available in 410, 420 and 450 bonds.

HUSQVARNA 400 SERIES 10mm segment height. The Ultimate Performance blade for flat saws, masonry saws and handheld power cutters. Sizes 300 to 610mm dia.

HS SERIES FOR HIGH SPEED, HAND-HELD POWER CUTTERS

For extremely hard reinforced concrete and granite etc. Designed for fast and efficient cutting.Sizes 305, 360 & 417mm dia.

DIAMOND BLADESFOR POWER CUTTERS, MASONRY AND LOW HP FLAT SAWS

HUSQVARNA 200 SERIES9mm segment height. For Extreme Performance on road saws, masonry saws and low hp handheld power cutters. Sizes 300 to 510mm dia.

HUSQVARNA 100 SERIES8mm segment height. Economical quality for the occasional user. Suits a broad range of materials on masonry saws and handheld saws. Sizes 300 to 415mm dia.

CONTINUOUS RIMProvides a perfect chip-free edgeSizes (dia): 105 to 250mm (wet above 150mm)125, 180mm dia (wet/dry)

SEGMENTEDIdeal blade for general-purpose cutting.Sizes (dia): 105 to 350mm (wet/dry)

Husqvarna Mizer diamond blades are premium quality. Developed for economy and hassle free working.

CONSTRUCTION LASERS

ML10xWorking range 300mAccuracy 1.5mm/30mBattery 7.2V Makita

ML11xWorking range 300mAccuracy 1.5mm/30mBattery 7.2V Makita

ML13ldWorking range 300m or 500mAccuracy 1.5mm/30mBattery 7.2V Makita

MLP120Beam diameter 10mm øAccuracy 2mm/100mWeight 3kg

Tripod & staff available

Trivet available

MULTI-PURPOSE CONSTRUCTION LASERSThe most rugged, easy to use, function packed and most accurate multi-purpose laser you can buy. Comes in a case with remote control unit and handheld receiver.

PIPE LASERDesigned to function under all jobsite conditions. Comes in a waterproof case with a range of accessories.

DIAMOND TOOLS

CUP WHEEL - TURBOGeneral-purpose, good for grinding concrete, masonry & stone products. Sizes (dia): 105, 125, & 180mm (wet/dry)

CUP WHEEL - DOUBLE ROW SEGMENTEDFast removal on concrete & masonry. Sizes (dia): 105, 125, 180mm (wet/dry)

7

POWER CUTTERS Active Series is among the most rugged cutter range in the world.

Husqvarna K3000 WetMotor 230V, 2700WCutting depth 125mm Blade Size 350mmWeight 9.9kg

Husqvarna K3000 VacMotor 230V, 2300WCutting depth 119/125mm Blade Size 350mmWeight 8.9kg

POWER CUTTER TROLLEYSEasy-to-use and compact. Water tanks holds 15 litres. Easy to fold up and transport.Two models available:KV760 (suits K750/K760) KV970 (suits K960/K970)/K1260)

KV970

HUSQVARNA K760 Lightweight, excellent fuel economy.HUSQVARNA K760 with OilGuard Eliminates engine damage from incorrect fuel oil mix.

Husqvarna K760 Husqvarna K760 OilGuardEngine 2-stroke, 74ccCutting depth 100/125mmBlade Size 300/350mmWeight 9.7/9.9kg

Husqvarna K1260 Engine 2-stroke, 119ccCutting depth 125/145mmBlade Size 350/400mmWeight 13.9/14.7kg

HUSQVARNA K960 Ring Makes 260mm cuts with a 350mm blade.

Husqvarna K960 RingEngine 2-stroke, 94ccCutting depth 260mmBlade Size 350mmWeight 13.1kg

Husqvarna K960 ChainEngine 2-stroke, 94ccCutting depth 390mmBar 350mmWeight 9.4kg

SOFF-CUT SAWS‘ SOFF-CUT EARLY ENTRY SAWS

SOFF-CUT 150

ROAD & FLOOR SAWS

Model FS309 FS413 FS627 Blade Size 350mm 500mm 600mmCut depth 120mm 190mm 220mmEngine EX27, 9.0hp EX40, 14.0hp 27.0hp

Husqvarna Soff-Cut 5000

Cutting depth (max) 100mm (4”)Engine Kohler 27.0hp petrol

Husqvarna Soff-Cut 4200

Cutting depth (max) 76mm (3”)Engine Kohler 23.0hp petrol

Husqvarna Soff-Cut 2500

Cutting depth (max) 38mm (1.5”)Engine Kohler 13.0hp petrol

Husqvarna Soff-Cut 4000

Cutting depth (max) 76mm (3”)Engine Kohler 20.0hp petrol

Husqvarna Soff-Cut 2000e

Cutting depth (max) 38mm (1.5”)Engine Subaru 9.0hp petrol

Husqvarna Soff-Cut 150

Cutting depth (max) 30mm (1.25”)Engine Subaru 4.5hp petrol

The Problem: Random CrackingThe Solution: With the Soff-Cut System you can cut within the first hour or two after finishing.

Husqvarna K970.14/.16Engine 2-stroke, 94cc Cutting depth 125/145mmBlade Size 350/400mmWeight 11.0kg/11.8kg

HUSQVARNA K970 Best power-to-weight ratio on the market.

Ideal for cutting concrete and asphalt. Reinforced

Model SP2Blade Size 508mmCut depth 191mmEngine 20.8hp petrol

FS413FS309 FS627

Models to suit large construction sites, multi-purpose applications and small expansion joint cutting.

HUSQVARNA K1260 The world’s largest & mightiest power cutter.

HUSQVARNA K3000 Wet Operates a water spray system on blade.

HUSQVARNA K960 Chain 390mm cuts from one side. No overcutting.

HUSQVARNA K3000 Vac For clean dry cutting without dust or water.

SOFF-CUT 2000e

Models to suit large paving applications and airport runways, heavy-duty industrial, light commercial and residential work.

SOFF-CUT 4200

frame reduces vibrations to improve sawing performance.

8

EDCPM8

EDCO CPM8Engine Subaru EX27, 9.0hp, OHCScarifing width 200mm

MASONRY SAWS Electric powered. are efficient with precision cutting capabilities. Fold away legs for transportation.

WET & DRY VACUUM

Attachment Systems: DustHoodie cover for floor grinding DustBuddie for dustless floor grinding crack chasing and decorative cutting. FlatBoy for floor sanding. Works well with DustHoodie.BitBuddie for dustless drilling (drills or corebits up to 35mm)

MASONRY SAWS SURFACE PREPARATION

CONCRETE SCARIFIER Makes short work of grooving, cleaning, texturing and levelling etc.

CONCRETE SCARIFIER

Engine

GRINDING/POLISHING MACHINES AND DUST COLLECTOR UNITS

Repairing worn concrete. Removing floor adhesives, sealers, paints and epoxies. Polishing concrete, terrazzo and natural stone. Petrol and electric models.

PG680

DC3300

DC5500

Industrial Semi-gloss High-gloss

It produces a floor exceptionally resistant to wear, marking, stains, abrasion and heat.

HUSQVARNA HIPERFLOOR METHOD A step-by-step method for grinding, treating and polishing any concrete floor.• Compact, low weight

and highly portable• Automatic dust filter

cleaning, prevents clogging while working

• Washable polyester filters

WET/DRY VACUUM is designed to handle extremely fine dust created by concrete, stone, fibreglass, drywall and similar materials.

Model DC1400Dimensions (mm) L580 x W380 x H870Weight 16.0kgMotor 1.5kW Single phase

Model TS400F TS350E TS300EBlade Size 400mm 350 (300)mm 350mmCutting depth 125mm 100/80mm 100mmReverse Cut 230mm -- -- Weight 96kg 92kg 82kg

Model PG820 PG680 PG530 PG400 PG280Power 12.5kW 12.5kW 4.75kW 4.0kW 2.2kWWidth 820mm 680mm 530mm 400mm 280mmDiscs(mm) 3x270 3x240 3x240 1x400 1x280Weight 440kg 385kg 216kg 115kg 70kg

PG530

PG280

TS400F

TS300E

TS350E

Model HD7070Engine: 35cc, 4-stroke, petrol

Weight with Blade:3.0kg 1220mm (4’)4.6kg 1800mm (6’)6.1kg 2440mm (8’)7.6kg 3000mm (10’)9.2kg 3660mm (12’)10.7kg 4270mm (14’)12.2kg 4880mm (16’)

9

POWER SCREEDS

PETROL ENGINE BREAKERHigh breaking force. Will take standard 32mm x 150mm tool bits.

Model BG231Weight 23.5kgEngine Subaru EC04, 40.2cc

Model UH070 Max Pressure 11.7Mpa Weight (dry) 44kgEngine Subaru EX21, 7.0hp

HYDRAULIC BREAKERS General finishing work.

HYDRAULIC ATTACHMENTS HAND SAW 14”

Model BH051 BH112 BH163 Weight 5.5kg 11kg 16kg

Model CH2500Blade/Cut depth 355mm/125mm Weight 8.3kg

Model PH300Max head 20mMax flow 1000 lts/minWeight 12.4kg

Petrol Powered Compact & portable.Comes with 5m of hydraulic hose.

Model H65SB2 H90SBWeight 16.5kg 32kg

H65SB2 H90SB

HYDRAULIC POWER PACK & BREAKERS

BH163

BH051

BH23K DH203 KH182

BH112

Full range on request.

WATER PUMP 3”

For a large range of applications.

Powerful suction.Maximun 20m hose extension.

LIGHTNING STRIKE ROLLER SCREED

Ideal for pervious concrete, and concrete laying jobs including wide, sloped or circular pours. Is operated outside of the concrete surface with adjustable tube sizes.

Magic screed is a great solution for your concrete laying. Easy, fast and reliable, the screed can be used on big construction sites and smaller indoor projects. Can level

up to 4 times more concrete than the traditional method quickly and with more accuracy.

Model BH23K DH203 KH182Weight 21.5kg 20kg 23kg

ELECTRIC BREAKERS

Available as a convenient Contractor Package • Control handle with 50cc petrol engine• End handle• 3 collapsible tripod stands• 460mm wall plug with riser wheel • Accessories and tool box• 4 screed tubes - 1.2m, 1.8m, 3.6m & 6.0m

SpecificationsEngine 2.5hp, 50cc petrolRoller lengths 3’, 4’, 6’, 12’, 20’

With wall plug attached, allows you to get close to walls etc.

1010

TROWEL BLADES

GROOVERS & EDGERS

ACCESSORIES

METAL PRODUCTS INC. ®

BULL/CHANNEL FLOATS Exceptional durability and will not warp. Ends designed to eliminate marking. Square or rounded end models available.Channel Floats - 24”, 48”, 60”& 72” 12ft model with outriggers

Speed Floats - 36”& 48”

METAL PRODUCTS INC. ®

Sturdy hand tools in a variety of styles. Stainless steel and bronze types.

Hand Groovers Walking GrooversEdger/GrooversBronze GrooversHand Edgers Long Handle EdgersDriveway Safety GrooverLong Handle GrooversSafety Ramp Groover (3 piece set)

METAL PRODUCTS INC. ®

BROOM HANDLESWooden & adjustable aluminiumSCRAPERS/CHOPPERSFor general clean up of forms & debris.FINISHING BROOMSHardwood with horse hair bristles. Aluminium with plastic fibres. SQUEEGEESBent ends or straight.ATTACHMENTS/BRACKETSWide variety (male & female).CUSHIONED KNEELING BOADReduces knee and lower back pain. TROWEL FILER Safely renews trowel edges.

HAND TROWELS ULTRA-GRIP Top quality, lightweight and made of high-carbon steel. Rubber handles. Square, round or square/round ends. MAGNESIUM T-Slot design for handle positioning. Tapered ends and rounded corners. Extra wide Jumbo style for decorative work.

FRESNO High carbon, polished spring steel. Uses a Fresno style handle. Round ends.

METAL PRODUCTS INC. ®

FLOAT PANS High quality Float Pans designed for both ride-on and walk-behind trowels. Two styles available - with standard clips and with Safety catch clips. Pans to fit 30”x 4 blades, 36”x 4 blades and 46”x 4 & 5 blades.

METAL PRODUCTS INC. ®

Top quality designed for ride-on and walk-behind models. The longest lasting high-performance trowel blades available.

GOLD PRO (up to 50% longer life)Style - Finishing Blade Sizes 6”x14” & 6”x18” Trowel Sizes 36” & 46”

BLUE XL (up to 25% longer life) Style - Finishing Blade Sizes 6”x14” & 6”x18” Trowel Sizes 36”& 46”

ORIGINAL SILVERStyle - Finishing Blade Size 6”x14”& 6”x18” Trowel Size 36”& 46”

PLASTIC BLADESSuitable for walk-behind models. Polished, mark free finish. Style - Finishing Blade Size 6”x14” Trowel Size 46”

FLOAT/SLIP ONStyle - Float/Clip On Blade Size 10”x14” & 10”x18” Trowel Sizes 6”& 46”

EDCO ‘CLIP ON’ BLADESFinish, combination and float. Blade sizes 6”x11”, 6”x14”, 6”x18”, 10”x14”, 10”x18”

HAND SCREEDS

PROFESSIONAL SERIES

• Ultra-lightweight powder coated aluminium• 1 piece construction

The YRCO KiwiScreed is 100% New Zealand made, and designed for professional concrete layers.

Available in 6 lengths: 1200mm (4’) 1800mm (6’) 2400mm (8’) 3000mm (10’) 3600mm (12’) 4200mm (13.3’)

CONCRETE RAKES Available in all aluminium, or steel with wooden handle. With or without a hook.

METAL PRODUCTS INC. ®

1111

PROTECTIVE GEAR that makesyour work safer.

ACCESSORIESFINISHING SLICKS Overshoes designed for wearing during the actual finishing and drying phase of concreting.Will greatly eliminate work boot and kneeboard marks.

CONCRETE REMOVING & SOFTENING CHEMICALS

ECO CRETEFor removing dry, hardened concrete. 5-litre container. Environmentally friendly. For use on: Tools, forms, trowels & screeds, concrete mixers, ready mix trucks & vehicles.

ECO COATFor tool and equipment protection. 5-litre container. Helps prevent concrete, asphalt and dirt from sticking.

For use on: Hand tools, equipment, forms, & vehicles.

HELMET Extra large visor, sun peak, neck guard and hearing protectors.

HEARING PROTECTION With FM radio & Bluetooth. Wireless GSM connection to mobile phone

GLOVESLeather palm and thumb. With Velcro fastening. BOOTS

Approved fire resistant rubber.

Reinforced toecap, non-slip sole and ankle protection.

GLASSESScratch resistant lenses. Adjustable frame.

Works with any size of shoe or boot. Quick to put on and take off.

SAFETY HELMET with attachable ear muffs

Automatic spray gun available for controlled application.

WATERBLASTERS

WHEEL BARROWS‘KELSO’ MASTER BUILDERS WHEEL BARROWS

TWB Polymer tray 90 litres

Two models available. Pneumatic tyres. Sturdy construction.

MPPTWB Heavy Duty Steel tray 95 litres

All models fitted with removable handle

COMES WITH 4 NOZZLES

0º 15º 25º 40º

Model YR2700ARPressure 2200psiMax flow 11 L/minEngine Subaru EX17 6.0hp

Model YR3000ARPressure 2600psiMax flow 13.5 L/minEngine Subaru EX21 7.0hp

Model YR3500ARPressure 3000psiMax flow 15.5 L/minEngine Subaru EX27 9.0hp

Model YR4000ARPressure 3600psiMax flow 17.5 L/minEngine Subaru EX40 14.0hp

PROFESSIONAL SERIES

Petrol powered, designed for industrial and commercial cleaning jobs. Highly portable, mounted on sturdy frame with pneumatic wheels. Features: • Powered by Subaru EX Series, OHC engines • 14 metres of hose. • Comes with gun, lance & variable pressure nozzles • Fitted with “Annovi Reverberi” high pressure pumps

12

AUCKLAND HEAD OFFICE6-10 Parkway Drive, Mairangi Bay, Auckland, New Zealand PO Box 100-040, North Shore City 0745 Phone: (+64) 09 443 2436 Fax: (+64) 09 443 2435 Email: sales@yrco.co.nz

SOUTH ISLAND BRANCH 20 Nga Mahi Road, Sockburn, Christchurch 8042, New Zealand Phone: (+64) 03 341 6923 Fax: (+64) 03 341 6955 Email: gregl@yrco.co.nzwww.yrco.co.nz

Proud to be 100% New Zealand Owned and Operated

PARTS SERVICEWe are proud of the back-up service we offer to customers. The importance of stocking genuine spare parts for all the equipment we supply is a high company priority.