Embed Size (px)
Citation preview
Computers 3: Revit
IDC : Institute of Design and Construction
Building Information Modeling with Revit 2013
Day 13 (Firehouse Day 10)
Reflected Ceiling Plans
Professor Paul C. King, RA, AIA, ARA
http://professorpaulking.wordpress.com/
http://students.autodesk.com/
1.15
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Reflected Ceiling Plans : Add Plans
• View > Plan Views > Reflected Ceiling Plan
• Check Levels in Elevation or Section View
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Correct Graphics & Display : Main Floor
• Main Floor (El. 143’-0 ½”)
• Propagate extents of grid here
• Check Properties & View Range
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Correct Graphics & Display : Ground Floor
• Ground Floor (El. 129’-11”)
• Propagate extents of grid here
• Check Properties & View Range
• Modify Top: and View Depth to Lower Roof
• Current Setting is T.O. Firehouse Footing
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Reflected Ceiling Plans : View Depth Settings
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Level Primary Range:Top & View Depth
Ground Floor Main Floor
Main Floor Lower Roof
Tower 1 Tower 2
Tower 2 Tower 3
Tower 3 Tower 4
Tower 4 Tower 5
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Add 2’x4’ Grid
• Ground Floor Ceiling
• Compound Ceiling 2’x4’ ACT System
• Select Room
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Rotate
• Ground Floor Ceiling : Rotate Grid Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Change to 2’x2’
• Ground Floor Ceiling : Rotate Grid & use 2’x2’ Grid Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Move
• Ground Floor Ceiling : Rotate Grid & use 2’x2’ Grid
• Rotate Grid
• Move grid by
snapping from grid
intersections to room
corners or midpoints
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Centered • Draw Guidelines from room corner to corner and grid intersection to grid intersection
• Move ceiling from midpoint of small guideline to midpoint of long guideline
• To see guidelines set Underlay to “Ground Floor”
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Add Lights & Registers
• Architecture > Place a Component > Load Family
• Lighting > Architectural > Interior > Internal > Troffer Light – 2x2 Parabolic
• Mechanical > Architectural > Air-Side components > Air terminals
• Place a light
• Align & Lock
• Position and
copy lights
• Also add HVAC
Supply & Return
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Sketch Ceiling • Architecture > Ceiling
• Sketch Ceiling
• Offset 3’ from all walls
• Creates 2x4 grid ceiling
• Adjust height to 9’-0” AFF
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Ground Floor Ceiling Plan : Add GWB Ceiling • Architecture > Ceiling
• Automatic Ceiling
• Select Room
• Edit Boundary > Trace Edge of Grid
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Development of a Construction Documents Set
• CD Set Categories
• Architectural Floor Plans
• Ceiling Plans
• Furniture Plans
• Structural Plans (typically all the same scale)
• Exterior Elevations
• Building Sections (scale typically matches plans)
• Wall Sections & Details (3/4”, 1 ½”, 3”)
• Interior Elevations (typically matches scale of part plans)
• Callouts of all types
• Part plans and Details
• Considerations
• What makes a good set of construction documents?
• What do we need to explain in order to build this building?
• Focus in a single category at a time and be thorough
• Appropriate Scale
• Sheet naming and numbering
• Project Browser Organization
• Final Assignment:
To develop as complete and logical set of construction documents as you can.
The final set will be printed 11 x 17 and bound in order and should comprise a
minimum of 30 to 40 sheets.
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
Prof. Paul C. King Copyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Day 13 - Wrap Up
• Reflected Ceiling Plans
Fix the Display
Propagate extents of grid
View Depth
• Add Ceilings
2x4 or 2x2 grids
Rotate, Move or Center
• Add Lights & HVAC Registers
Place a Component
Load Family
• Soffit with Grid
2x4 Grid @ 9’-0” AFF
GWB Soffit @8’-0” AFF
• CD Documents Review
• Wrap Up
Day 13 FH.10
Ceiling Plans
Add plans
Fix Display
Main Floor
Ground Floor
Add Ceilings
2x4 Grid
Rotate
2x2 Grid
Move
Center
Add Lights
2x2 Parabolic
Soffit with Grid
Sketch Ceiling
GWB Ceiling
CD Documents
Wrap Up
