Upload
tate-dyer
View
45
Download
0
Embed Size (px)
DESCRIPTION
Components. HP and IP, High T Rotor Diaphram Blades/Nozzles Casing/Steam Chest. LP, High T Rotor Diaphram Blades/nozzles. List of Potential Materials HP, High T, Static and Dynamic. Inconel 617 Inconel 625 Inconel 718 Inconel 740 Nimonic 105 Nimonic 115 Nimonic 263. - PowerPoint PPT Presentation
Citation preview
Components
• HP and IP, High T– Rotor– Diaphram– Blades/Nozzles– Casing/Steam Chest
• LP, High T– Rotor– Diaphram– Blades/nozzles
List of Potential MaterialsHP, High T, Static and Dynamic
• Inconel 617• Inconel 625• Inconel 718• Inconel 740• Nimonic 105• Nimonic 115• Nimonic 263
• Haynes 230• Haynes 282• U700• U710• U720• Waspaloy• ODS-FeCrAl
Phase 1 – Disqualifying FactorsHP Components – Rotor and Casing
Weldability(Ti+Al )< 2.5
•Yes - Inconel 617, Inconel 625, Inconel 718, Haynes 230, Inconel 740, Nimonic 263
•No - U700, U710, U720, Waspalloy, Nimonic 105, Nimonic 115, Haynes 282 ODS-FeCrAl
Larson-
Miller Parameter >
25
•Yes - Inconel 617, Inconel 740, Nimonic 263
•No - Inconel 625, Inconel 718, Haynes 230
Machinabilit
y
•Inconel 617, Inconel 740, Nimonic 263
Phase 2 - Performance RankingRotor and Diaphragm
Material Yield Strength Oxidation x 10 Cost x - 5 Total
Inconel 617 283 8 10.70 309.5
Inconel 740 608 10 10.70 654.5
Nimonic 263 630 6 11.39 633.05
Phase 2 - Performance RankingCasing
Material Yield Strength Oxidation x 5 Cost x - 10 Total
Inconel 617 283 8 10.70 216
Inconel 740 608 10 10.70 551
Nimonic 263 630 6 11.39 546.1
Phase 1 – Disqualifying FactorsHP Components – Blades
WeldabilityN/A •N/A
Larson-
Miller Parameter >
25
•Yes - Inconel 617, Inconel 740, Nimonic 263, Nimonic 105, Nimonic 115, U720, Waspaloy, Haynes 282
•No - Inconel 625, Inconel 718, Haynes 230
Machinabilit
y
•Yes - Inconel 617, Inconel 740, Nimonic 263,Nimonic 105, Nimonic 115, U720, Waspaloy, Haynes 282
•No – U720
Phase 2 - Performance RankingHP Blades
Material Yield Strength Oxidation x 10 Cost x - 10 Total
Inconel 617 283 8 10.70 256
Inconel 740 608 10 10.70 601
Nimonic 263 630 6 11.39 576.1
Nimonic 105 690 x 11.36 576.4
Nimonic 115 690 x 11.36 576.4
Waspaloy 650 5 10.30 597
Haynes 282 614 6 10.35 570
List of Potential MaterialsLP Components
• 304• 316Ti• A286• 253MA
Phase 1 – Disqualifying FactorsLP Components
Weldability(Ti+Al )< 2.5
•Yes – 304, 316Ti, 253MA, A286
•No -
Larson-
Miller Param
eter > ??
•Yes -
•No -
Machinabilit
y