blue’Log XM / XC

Compatibility listVersion 21.1.3 (2021-08-16)

1

CopyrightCopyright for this document remains with the manufacturer. No part of this document may be reproduced or edited, duplicated or

distributed in any form or by any means without prior written consent of meteocontrol GmbH.

Compensation shall be payable in the event of any copyright infringements.

Trademarks and trade names mentioned in this manual are the property of their respective holders and are hereby acknowledged.

Contact dataThe manufacturer of the device described in this documentation is:

meteocontrol GmbH

Spicherer Straße 48

86157 Augsburg

Germany

Phone: +49 (0)821 34666 - 0

Web: www.meteocontrol.com

Technical support:

Phone: +49 (0)821 34666 - 44

E-mail: technics@meteocontrol.com

Details regarding the documentThe original document is written in English. All other language versions are translations of the original document and are hereby

identified as such.

© 2021 meteocontrol GmbH.

All rights reserved.

All information in this document has been compiled and checked with the greatest care and diligence. Nevertheless, the possibility of

errors cannot be entirely excluded. meteocontrol GmbH therefore cannot accept any liability for errors or their consequences.

Subject to technical alterations.

2

Contents

Connections.......................................................................................................................................15RS485 bus cabling.........................................................................................................................15

Ethernet Connection..................................................................................................................15Clamp connection.....................................................................................................................15RJ45 jack...................................................................................................................................15

Max. number of devices...................................................................................................................16

Beta version.......................................................................................................................................16

Inverter..............................................................................................................................................17ABB...............................................................................................................................................17

PRO...........................................................................................................................................17PVS 800....................................................................................................................................19PVS 800-57B............................................................................................................................21PVS 980....................................................................................................................................23PVS, TRIO, TRIO-TM, UNO-DM-PLUS (SunSpec)..............................................................25TRIO-20.0/27.6-TL-OUTD......................................................................................................27ULTRA 750/1100/1500.............................................................................................................29UNO, TRIO, PVI, PVI-CENTRAL, REACT, ULTRA, PLUS, CORE (Aurora Protocol)......31

Advanced Energy...........................................................................................................................35PVPXXXX_PVP30KW/AExxxTX..........................................................................................35

AEG...............................................................................................................................................37Protect Pv..................................................................................................................................37

AETI..............................................................................................................................................39Integrated Solar Inversion System (ISIS).................................................................................39

Albatech.........................................................................................................................................41APL...........................................................................................................................................41

ARM Solar.....................................................................................................................................43AEC Trinergy Plus Series.........................................................................................................43

AROS (Riello)...............................................................................................................................45SIRIO K12 - K800 central inverter...........................................................................................45

Astrid Energy Enterprises..............................................................................................................47Copernico TT/TL......................................................................................................................47

ATESS Power................................................................................................................................49HPS...........................................................................................................................................49

Canadian Solar...............................................................................................................................51CSI series..................................................................................................................................51

Chint...............................................................................................................................................53CPS Series.................................................................................................................................53CPS-T/SA Series.......................................................................................................................55

Danfoss..........................................................................................................................................57DLX, FLX, TLX, ULX.............................................................................................................57

Delta...............................................................................................................................................59DelCEN 1000............................................................................................................................59M (Q@night, only Q method) (SunSpec).................................................................................61M (SunSpec).............................................................................................................................63SI, SOLIVIA, SOL, TL, RPI (Delta protocol)..........................................................................65

3

Diehl Ako.......................................................................................................................................68PLATINUM..............................................................................................................................68

EEI.................................................................................................................................................718YF............................................................................................................................................71

Emerson.........................................................................................................................................73Unidrive SPV1..........................................................................................................................73Unidrive SPV2..........................................................................................................................75

FIMER...........................................................................................................................................77PVS-10/33-TL...........................................................................................................................77R400 - R5000TL.......................................................................................................................79

FRIEM...........................................................................................................................................81RECon 30 Central Inverter (firmware > 2.42.0).......................................................................81RECon Central Inverter (firmware > 5.2.xx)............................................................................83

Fronius...........................................................................................................................................85Datamanager 2.0 / GEN24 / Tauro............................................................................................85Fronius SolarNet Inverter..........................................................................................................87

Gamesa Electric.............................................................................................................................91Inverter III 500kW....................................................................................................................91

Gefran............................................................................................................................................93APVS1XF.................................................................................................................................93APVS2XF.................................................................................................................................95APVS3XF.................................................................................................................................97APVX2M..................................................................................................................................99APVX4TL...............................................................................................................................101

Ginlong........................................................................................................................................103Solis.........................................................................................................................................103

GoodWe.......................................................................................................................................106ET series..................................................................................................................................106MT, XS, NS, DNS, HF, SDT-G2, SDT, DT, SMT..................................................................108

GPTech.........................................................................................................................................111PV series..................................................................................................................................111

Growatt........................................................................................................................................113750~3000 S.............................................................................................................................1132500~5500 MTL-S..................................................................................................................1153000~6000 TL3-S...................................................................................................................1177000~11000 TL3-S.................................................................................................................11910000~20000 UE....................................................................................................................12112000~15000 TL3-S...............................................................................................................12317000~25000 TL3-S...............................................................................................................12530000~50000 TL3-S...............................................................................................................127MAC xx KTL3 x LV...............................................................................................................129MAX xx KTL3 LV/MV..........................................................................................................131SPA xxxx TL-BL.....................................................................................................................133SPA xxxx TL3-BH..................................................................................................................135SPH xxxx................................................................................................................................137SPH xxxx TL3-BH..................................................................................................................139

Huawei.........................................................................................................................................141SUN2000.................................................................................................................................141SUN2000L..............................................................................................................................144

Ingeteam.......................................................................................................................................146

4

Ingecon SUN...........................................................................................................................146Jema.............................................................................................................................................149

IF 20 / 25 / 30..........................................................................................................................149IF 50 / 80 / 100........................................................................................................................151IF500.......................................................................................................................................153IF700.......................................................................................................................................155IF730.......................................................................................................................................157IF765.......................................................................................................................................159IF800.......................................................................................................................................161IF1050.....................................................................................................................................163IF1100.....................................................................................................................................165IF1150.....................................................................................................................................167IF1200.....................................................................................................................................169

KACO new energy.......................................................................................................................171Powador TL3, blueplanet (SunSpec)......................................................................................171Powador, blueplanet (KACO protocol)...................................................................................173

Kostal...........................................................................................................................................177PIKO.......................................................................................................................................177PIKO IQ/PLENTICORE plus.................................................................................................179

Kstar.............................................................................................................................................181GSL series...............................................................................................................................181KSG1K-60K............................................................................................................................183

LTi ReEnergy...............................................................................................................................185PVMaster II/III........................................................................................................................185

neoom...........................................................................................................................................187BLOKK inverter.....................................................................................................................187

Power Electronics........................................................................................................................189HE / HEC / HES Series...........................................................................................................189HEM series..............................................................................................................................191HEMK series...........................................................................................................................193

RCT Power..................................................................................................................................195Inverter 4.0 / 5.0 / 6.0..............................................................................................................195

REFU / Siemens / Schueco / LSIS / Satcon / Advanced Energy.................................................197REFUsol, SINVERT PVM, IPE, LSRP, Equinox LC, 3TL (USS Protocol)..........................197

Riello............................................................................................................................................200RS series..................................................................................................................................200

SAJ...............................................................................................................................................202Suntrio Plus.............................................................................................................................202

Santerno.......................................................................................................................................204Sunway TG..............................................................................................................................204

Satcon...........................................................................................................................................206PowerGate Plus < 100kW.......................................................................................................206PowerGate Plus > 100kW.......................................................................................................208

Schneider Electric........................................................................................................................210Conext CL SERIES.................................................................................................................210Conext Core XC......................................................................................................................212Conext SmartGen....................................................................................................................214

Shenzhen INVT Electric..............................................................................................................217iMars series.............................................................................................................................217

SIEL.............................................................................................................................................219

5

10TL Solar Inverter.................................................................................................................219Monophase Solar Inverter.......................................................................................................221Solar Converter.......................................................................................................................223Soleil.......................................................................................................................................225

Siliken..........................................................................................................................................227SE100......................................................................................................................................227

SMA.............................................................................................................................................229SC (SMA Data).......................................................................................................................229SHP3, STP, SB, SBS, SI (SunSpec)........................................................................................232SMA Modbus..........................................................................................................................234SOLID-Q 50............................................................................................................................237SOLID-Q PRO 60...................................................................................................................239STP 60, STPS 60, SHP 1 (SunSpec).......................................................................................241STP 110-60 (Core2)................................................................................................................243STP, SB, SMC (SMA Data)....................................................................................................245Sunny Central (1760-4600).....................................................................................................248Sunny Central (CP, CP-US, CP-JP, HE).................................................................................250

Socomec.......................................................................................................................................252SUNSYS.................................................................................................................................252

SOFARSOLAR............................................................................................................................254SOFAR / ME / HYD...............................................................................................................254

SolarEdge.....................................................................................................................................257SE (SunSpec)..........................................................................................................................257

SolarMax......................................................................................................................................259SolarMax Inverter (MaxComm Protocol)...............................................................................259

Solax Power.................................................................................................................................262X3 Hybrid...............................................................................................................................262

SunGrow......................................................................................................................................264SG 3125-3400HV/HV-MV/U.................................................................................................264SG1 - SG250 (string inverter).................................................................................................266SG500 - SG2500 HV/MV (turnkey station)...........................................................................269

SunSpec Alliance.........................................................................................................................271Compatible inverter.................................................................................................................271

Sunways.......................................................................................................................................273STS, STT.................................................................................................................................273

Tabuchi Electric...........................................................................................................................275MBX03_US2..........................................................................................................................275

TMEIC.........................................................................................................................................276SOLAR WARE 100................................................................................................................276SOLAR WARE 175................................................................................................................278SOLAR WARE 250................................................................................................................280SOLAR WARE 490................................................................................................................282SOLAR WARE 500................................................................................................................284SOLAR WARE 630................................................................................................................286SOLAR WARE 665................................................................................................................288SOLAR WARE 675................................................................................................................290SOLAR WARE 750................................................................................................................292SOLAR WARE 833................................................................................................................294SOLAR WARE 1000..............................................................................................................296SOLAR WARE 1000ERM......................................................................................................298

6

SOLAR WARE 1250..............................................................................................................300SOLAR WARE 1667..............................................................................................................302SOLAR WARE 1833..............................................................................................................304SOLAR WARE 2220..............................................................................................................306SOLAR WARE 2500..............................................................................................................308SOLAR WARE 2550..............................................................................................................310SOLAR WARE 2700..............................................................................................................312SOLAR WARE 3200..............................................................................................................314

Yaskawa Solectria........................................................................................................................316PVI 14-60TL...........................................................................................................................316

Sensor...............................................................................................................................................318Brodersen.....................................................................................................................................318

PT100 with converter PXT-10................................................................................................318PT1000 with converter PXT-11..............................................................................................319

Campbell Scientific......................................................................................................................320CR-PVS1.................................................................................................................................320CR-PVS2.................................................................................................................................321

contrel elettronica srl...................................................................................................................322CTT4.......................................................................................................................................322CTT8.......................................................................................................................................323

DAVIS..........................................................................................................................................324VantagePro2............................................................................................................................324

Dini Argeo....................................................................................................................................325DGT20....................................................................................................................................325

EKO Instruments.........................................................................................................................326MS series.................................................................................................................................326

Fuji Electric..................................................................................................................................327Water Level Transmitter..........................................................................................................327

Huawei.........................................................................................................................................328SmartLogger 2000/3000 EMI.................................................................................................328

Hukseflux.....................................................................................................................................329SR Series.................................................................................................................................329SR20-TR/D2...........................................................................................................................330

Kipp & Zonen..............................................................................................................................331DustIQ.....................................................................................................................................331RaZON+..................................................................................................................................332RT1..........................................................................................................................................333SMPx (4 - 20 mA)...................................................................................................................334SMPx, SGRx, SHPx, PR1, PH1, SUVx (Modbus).................................................................335

Lufft.............................................................................................................................................337WSxxx.....................................................................................................................................337

Meier-NT.....................................................................................................................................339ADL-SR..................................................................................................................................339

meteocontrol................................................................................................................................340Hygro-Thermosensor compact................................................................................................340PT100 compact.......................................................................................................................341Si-12TC...................................................................................................................................342Si-12TC-T...............................................................................................................................343Si-020TC.................................................................................................................................344

7

Si-020TC-T.............................................................................................................................345Si-420TC.................................................................................................................................346Si-420TC-T.............................................................................................................................347Si-I-420...................................................................................................................................348Si-I-420-T................................................................................................................................349Si-RS485TC-2T-MB...............................................................................................................350Si-RS485TC-2T-V-MB...........................................................................................................351Si-RS485TC-T-MB.................................................................................................................352Si-RS485TC-T-Tm-MB..........................................................................................................353Si-V-010..................................................................................................................................354Si-V-010-T..............................................................................................................................355Ta-ext-RS485..........................................................................................................................356Tm-I-4090...............................................................................................................................357Tm-RS485...............................................................................................................................358Wind direction classic (0 - 10 V)............................................................................................359Wind direction classic (4 - 20 mA).........................................................................................360Wind direction compact (0 - 10 V).........................................................................................361Wind direction compact (4 - 20 mA)......................................................................................362Wind speed classic (0 - 10 V).................................................................................................363Wind speed classic (4 - 20 mA)..............................................................................................364Wind speed compact (0 - 10 V)...............................................................................................365Wind speed compact (4 - 20 mA)...........................................................................................366

NES..............................................................................................................................................367SOZ-03....................................................................................................................................367

NOHKEN.....................................................................................................................................368PLD121-11 (Water depth) Analog (4 - 20 mA)......................................................................368

Power Electronics........................................................................................................................369Protection system - HEMK + MVSKID.................................................................................369

Sommer Messtechnik...................................................................................................................370USH-8/9 (0 - 20 mA)..............................................................................................................370USH-8/9 (4 - 20 mA)..............................................................................................................371USH-9 (Modbus).....................................................................................................................372

SunGrow......................................................................................................................................373Logger 1000/3000 Meteo Station...........................................................................................373

SunSpec Alliance.........................................................................................................................374Compatible sensor...................................................................................................................374

Thermokon...................................................................................................................................375PT1000 with integrated converter...........................................................................................375

TOKYO KEISO...........................................................................................................................376UW3000 (Water depth) Analog (4 - 20 mA)..........................................................................376UW3000 (Water depth) Modbus.............................................................................................377

Vendor-neutral..............................................................................................................................378Analog input (0 - 20 mA)........................................................................................................378PT1000....................................................................................................................................379

Meter................................................................................................................................................380ABB.............................................................................................................................................380

A43/A44..................................................................................................................................380B23/B24..................................................................................................................................382CM-UFD.MxxM.....................................................................................................................384

8

M2M Ethernet.........................................................................................................................385REF615...................................................................................................................................387RET620...................................................................................................................................389RIO600 - SIM8F.....................................................................................................................391

Accuenergy..................................................................................................................................393Acudc 240...............................................................................................................................393Acuvim II................................................................................................................................394

AEC.............................................................................................................................................396USM-1.....................................................................................................................................396

Antarc-Automation......................................................................................................................398TicMaster (Pro).......................................................................................................................398

Bender..........................................................................................................................................400LINETRAXX VMD460-NA..................................................................................................400

CCK.............................................................................................................................................401CCK6700E..............................................................................................................................401

CEWE Instrument........................................................................................................................403Elite440...................................................................................................................................403Prometer..................................................................................................................................405Prometer (Marcom Gateway)..................................................................................................407Prometer 100...........................................................................................................................409

Circutor........................................................................................................................................411Cirwatt B series.......................................................................................................................411CVM 96, Mini.........................................................................................................................413CVM-C10................................................................................................................................415

ComAp.........................................................................................................................................417InteliPro G59...........................................................................................................................417

Daiichi Electronics.......................................................................................................................419SQLC 110L.............................................................................................................................419

Deep Sea Electronics...................................................................................................................421DSEP100.................................................................................................................................421

DEIF.............................................................................................................................................423ASC Main meter.....................................................................................................................423

dpee..............................................................................................................................................424TH40 (Marcom Gateway).......................................................................................................424TH40C.....................................................................................................................................426

Eaton............................................................................................................................................428EDR-5000...............................................................................................................................428IQ 35MA12 / IQ 35MA13......................................................................................................430IQ 35MA22 / IQ 35MA23......................................................................................................432METER44...............................................................................................................................434Power Xpert Meter 2000 / IQ 250/260...................................................................................436

EDMI...........................................................................................................................................438SmartHub................................................................................................................................438

Electro Industries/GaugeTech......................................................................................................440Shark 100S..............................................................................................................................440Shark 200/270.........................................................................................................................442Shark 250................................................................................................................................444

Elster............................................................................................................................................446A1500 (Marcom Gateway).....................................................................................................446A1700 (Marcom Gateway).....................................................................................................447

9

A1700 / A1140 (KoCos ME27.1)...........................................................................................449ALPHA A18xx........................................................................................................................451PowerCom2.............................................................................................................................453

EMH.............................................................................................................................................455LZQJ (Marcom Gateway).......................................................................................................455

Fanox...........................................................................................................................................457SIA-B/C series........................................................................................................................457

Frer...............................................................................................................................................458C96...L.....................................................................................................................................458QUBO 96H.............................................................................................................................460

GE Multilin..................................................................................................................................462PQMII Power Quality Meter...................................................................................................462

Hager............................................................................................................................................464ECR/ECA................................................................................................................................464

HAKARU PLUS CORP..............................................................................................................466XM2-110-5..............................................................................................................................466

Horstmann....................................................................................................................................467ComPass B series....................................................................................................................467

Huawei.........................................................................................................................................469SmartLogger 2000/3000 Power Meter....................................................................................469

IntelliHub.....................................................................................................................................471Modbus Duo............................................................................................................................471

ISKRA.........................................................................................................................................473ISKRA (Marcom Gateway)....................................................................................................473MC330....................................................................................................................................475

Iskraemeco...................................................................................................................................477MT880.....................................................................................................................................477

Itron/Actaris.................................................................................................................................479SL7000 (Elsist Gateway)........................................................................................................479SL7000 (Marcom Gateway)....................................................................................................480

Janitza..........................................................................................................................................482UMG 503................................................................................................................................482UMG series.............................................................................................................................484

Kries-Energietechnik...................................................................................................................486Grid-Inspector IKI-50.............................................................................................................486

Landis & Gyr...............................................................................................................................488E650 (Marcom Gateway)........................................................................................................488

Lovato..........................................................................................................................................490PMVF series............................................................................................................................490

Meter Gateway.............................................................................................................................492L-Box......................................................................................................................................492

Metering Dynamics......................................................................................................................493SmartHub................................................................................................................................493

Microstar......................................................................................................................................495P2000......................................................................................................................................495

Mitsubishi....................................................................................................................................497ME110.....................................................................................................................................497

Nader............................................................................................................................................499NWK22...................................................................................................................................499

PLUS ES......................................................................................................................................501

10

Modbus Duo............................................................................................................................501Powermetric.................................................................................................................................503

Modbus Duo............................................................................................................................503PQ Plus........................................................................................................................................505

UMD series.............................................................................................................................505Regulus........................................................................................................................................507

uReg........................................................................................................................................507SACI............................................................................................................................................509

AHM1.....................................................................................................................................509Satec.............................................................................................................................................511

PM13xP/A/E/EH.....................................................................................................................511SBC..............................................................................................................................................513

ALE3 / AWD3.........................................................................................................................513Schneider Electric........................................................................................................................515

EM125X..................................................................................................................................515EM6400...................................................................................................................................517iEM3155 / iEM3255 / iEM3355 / iEM3555...........................................................................519ION7X00/8X00 series.............................................................................................................521ION7x5x series.......................................................................................................................523ION73X0 series.......................................................................................................................525ION7400..................................................................................................................................527MiCOM P125, P126 & P127..................................................................................................529PM2XX/PM7XX....................................................................................................................531PM2xx0 series.........................................................................................................................533PM51xx/PM53xx/PM55xx.....................................................................................................535PM325x...................................................................................................................................538PM800 series...........................................................................................................................540PM8240...................................................................................................................................542Sepam S40 series....................................................................................................................544

SEL..............................................................................................................................................546SEL-735..................................................................................................................................546

Siemens........................................................................................................................................5487SR10 Argus...........................................................................................................................548PAC.........................................................................................................................................550

SunSpec Alliance.........................................................................................................................552Compatible meter....................................................................................................................552

Takemoto Denki...........................................................................................................................553XM2-110.................................................................................................................................553

Thytronic......................................................................................................................................555PRON NV10P-MB0...............................................................................................................555

Vendor-neutral..............................................................................................................................557S0 energy meter.......................................................................................................................557

Veris Industries............................................................................................................................558E51C2......................................................................................................................................558

WEG............................................................................................................................................559MMW03-M22CH...................................................................................................................559

Woodward....................................................................................................................................561MFR 300.................................................................................................................................561MRA4 / MCA4.......................................................................................................................563

Yokogawa....................................................................................................................................565

11

PR300......................................................................................................................................565

String monitoring...........................................................................................................................567ABB.............................................................................................................................................567

ABB PVI-STRINGCOMB (Aurora protocol)........................................................................567Ultra Solar Field Gathering.....................................................................................................568

AROS (Riello).............................................................................................................................569String Box...............................................................................................................................569

Astrid Energy Enterprises............................................................................................................570Array Monitor.........................................................................................................................570

Carlo Gavazzi..............................................................................................................................571VMU.......................................................................................................................................571

Chint.............................................................................................................................................572CPS CB10...............................................................................................................................572

Circutor........................................................................................................................................573STM........................................................................................................................................573TR8..........................................................................................................................................574TR16........................................................................................................................................575

Fronius.........................................................................................................................................576Fronius SolarNet String Control.............................................................................................576

Gantner.........................................................................................................................................577string.bloxx 1xx EM 1500V....................................................................................................577

Ingeteam.......................................................................................................................................578DC Current Measurement HW................................................................................................578

KACO new energy.......................................................................................................................579blueplanet Argus (SunSpec)....................................................................................................579Powador Argus 16/24S DCS...................................................................................................580

Kernel sistemi..............................................................................................................................581ST0Nxxxx...............................................................................................................................581ST1Nxxxx...............................................................................................................................583ST1xxxx..................................................................................................................................584

Klein.............................................................................................................................................585KSM-VX.X.............................................................................................................................585

meteocontrol................................................................................................................................586i´catcher...................................................................................................................................586String Monitoring Unit (Kernel Sistemi ST2xxxx)................................................................587

Monsol.........................................................................................................................................5881000|1500V Shunt...................................................................................................................588

Noark...........................................................................................................................................589SUP 4S-20S.............................................................................................................................589

Phoenix Contact...........................................................................................................................590Solarcheck...............................................................................................................................590

Power Electronics........................................................................................................................591HE/HEC/HES Disconnecting Unit.........................................................................................591HE/HEC/HES String Supervisor 8/32....................................................................................592

Raycap.........................................................................................................................................593ProSMS...................................................................................................................................593

Renovagy.....................................................................................................................................594PV5690 String Monitoring System.........................................................................................594PV5790 String Monitoring System.........................................................................................595

12

Santerno.......................................................................................................................................596Smart String Box.....................................................................................................................596Sunway TG ES1008................................................................................................................598

SENECA......................................................................................................................................599Z-4AI SCB (0 to 025A)..........................................................................................................599Z-8AI SCB (0 to 025A)..........................................................................................................600

SIEL.............................................................................................................................................601CSP12......................................................................................................................................601

SMA.............................................................................................................................................602String-Monitor (SSM-U).........................................................................................................602Sunny Central (1760-4600) Zone Monitoring........................................................................603Sunny Central (CP, CP-US, CP-JP, HE-20) String Monitor...................................................604Sunny Central (CP, CP-US, CP-JP, HE-20) Zone Monitoring................................................605

Socomec.......................................................................................................................................606SUNSYS IFB/FJB...................................................................................................................606

SolarMax......................................................................................................................................607MaxConnect PLUS (MaxComm Protocol).............................................................................607

Spelsberg......................................................................................................................................608PV Monitoring System............................................................................................................608

SunSpec Alliance.........................................................................................................................609Compatible string monitoring.................................................................................................609

TMEIC.........................................................................................................................................610SGV.........................................................................................................................................610

Weidmüller...................................................................................................................................611Transclinic xi+.........................................................................................................................611

Status DI external...........................................................................................................................612ABB.............................................................................................................................................612

RIO600 - DIM8.......................................................................................................................612CRD.............................................................................................................................................613

CRD600A................................................................................................................................613EXPERT.......................................................................................................................................614

EX9053DM.............................................................................................................................614Huawei.........................................................................................................................................615

SmartLogger 2000 DI Status...................................................................................................615Santerno.......................................................................................................................................616

Sunway TG Remote I/O..........................................................................................................616SMA.............................................................................................................................................617

ioLogik E1210-T.....................................................................................................................617WAGO.........................................................................................................................................618

I/O Systems series 750, 750XTR, 753, 767............................................................................618Weidmüller...................................................................................................................................620

UR20-FBC-MOD-TCP-V2.....................................................................................................620

Tracker............................................................................................................................................621AlionEnergy.................................................................................................................................621

Storm Tracker..........................................................................................................................621Arctech Solar...............................................................................................................................622

Sky Smart System...................................................................................................................622Array Technologies......................................................................................................................624

13

Dura Track Hz.........................................................................................................................624Braux............................................................................................................................................625

SL series..................................................................................................................................625Convert.........................................................................................................................................626

TRJ-AI....................................................................................................................................626FTC Solar.....................................................................................................................................627

Voyager...................................................................................................................................627GameChange Solar......................................................................................................................628

Genius Tracker........................................................................................................................628Ideematec.....................................................................................................................................629

safe Track Trackersystem........................................................................................................629NCLAVE......................................................................................................................................630

Solar tracker SP1000...............................................................................................................630SP160......................................................................................................................................631

NEXTracker.................................................................................................................................632NX Horizon.............................................................................................................................632

Powerway.....................................................................................................................................633Tracker Control Box................................................................................................................633

PVHardware.................................................................................................................................634Axone Duo..............................................................................................................................634

Solar FlexRack.............................................................................................................................635Turnkey Solar Tracker.............................................................................................................635

Soltec...........................................................................................................................................636SF Tracker...............................................................................................................................636

Soltigua........................................................................................................................................637iTracker...................................................................................................................................637

SunTrack......................................................................................................................................638Network Control Unit.............................................................................................................638

TerraTrak......................................................................................................................................639Trak.........................................................................................................................................639

Battery.............................................................................................................................................640ADS-TEC.....................................................................................................................................640

StoraXe Master.......................................................................................................................640Delta.............................................................................................................................................641

RT-10K....................................................................................................................................641Tesla.............................................................................................................................................642

Energy Storage System...........................................................................................................642

Genset..............................................................................................................................................643Deep Sea Electronics...................................................................................................................643

7310MkII................................................................................................................................643DEIF.............................................................................................................................................645

ASC Genset (with AGC).........................................................................................................645ASC Genset (without AGC)....................................................................................................646

Appendix.........................................................................................................................................647SunSpec measurement values......................................................................................................647

Inverter....................................................................................................................................647Sensor......................................................................................................................................647

14

Meter.......................................................................................................................................649String monitoring....................................................................................................................649

15

ConnectionsRS485 bus cablingThe blue’Log offers two separate RS485 interfaces (RS485–1 and RS485–2) which can be used for querying information recorded on

various bus devices such as inverters, power quality analyzers, etc.

Please note the following regarding the bus cabling:

Each RS485 interface supports only a single protocol (for example, Modbus).

All devices on a bus must use the same protocol to communicate.

For Power Control requirements it is recommended to only connect inverters from the same series to one RS485 interface.

The data logger functions exclusively as a master on the bus.

The maximum permitted number of bus devices has to be observed (see driver information).

The order of the bus devices on the bus is unimportant.

The use of a repeater is necessary for every 32nd bus device and for long cable runs.

The bus should be cabled with a twisted and shielded pair of wires.

The shield of the bus cable must be grounded at one end of the connection only. The data logger does not have its own

grounding.

When wiring the bus wires, it is important that AC and DC cables are routed separately.

Do not switch the buses signal wires.

Different manufacturers interpret the RS485 interface's underlying standard differently. A and B wire labels may be different

depending on different manufacturer. The + and – indicators, on the other hand, are unambiguous.

To prevent reflections, the bus must always be terminated with a parallel terminator.

Ethernet ConnectionWhen connecting devices via Ethernet to the blue'Log XM / XC, the IP addresses of the devices which should get connected must be

static.

Clamp connection

Figure 1 - Clamp assignment blue'Log

RJ45 jack

Figure 2 - RJ45 pin assignment

Please consider that the pin assignment of RJ45 jacks can be specific depending on the manufacturer.

16

Max. number of devices Value for max. number of devices in COMMUNICATION section of each driver got calculated theoretically

These values got calculated based on the requirements, Power Control and Monitoring without data gaps

Please check the manufacturer documentation for information regarding the maximum amount of devices which can be

connected to one RS485 bus or to a communication gateway

The amount stated for "Max. number of devices" for each driver refers to the connection via blue'Log XM

When connecting tracker systems the amount of devices which can get connected can get extended on blue'Log XM with help

of the so called "Tracker mode". In case activated on blue'Log XM, up to 250 devices can be queried instead of 100. Except

for the device types tracker, sensor and status, no further devices can be configured. Please note this feature is not available

for blue'Log XC

Beta versionPlease note: Drivers which are tagged with Beta-Version

have not been tested in the field yet

are just available via meteocontrol support

If beta version tagged driver should be required, please contact meteocontrol support:

Technical support:

Phone: +49 (0)821 34666 - 44

E-mail: technics@meteocontrol.com

17

InverterABB

PRO

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 45

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

18

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

STATE (1,...x) Status (1,...x)

S_AC Apparent power

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PRO series

PRO-33.0-TL PRO-33.0-TL-OUTD PRO-33.0-TL-OUTD-400

PRO-33.0-TL-OUTD-S-400 PRO-33.0-TL-OUTD-SX-400

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

19

PVS 800

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

20

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PVS 800

For connection of PVS800 only inverters with firmware (DTC) version ≥ 7320 get supported.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

21

PVS 800-57B

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 22

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Ethernet communication requires the ABB communication module FENA-21. This module needs to be configured. Parameter

154.03 and 154.23 must be set to value 3.

RS485 communication requires the ABB communication module FSCA. This module needs to be configured. Parameter

154.03 and 154.23 must be set to value 3.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

22

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

Q_AC Reactive power

R_ISO Insulation resistance

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PVS 800-57B

For connection of PVS800-57B only inverters with firmware (DTC) version ≥ 1.41 get supported.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

23

PVS 980

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 22

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Ethernet communication requires the ABB communication module FENA-21. This module needs to be configured. Parameter

154.03 and 154.23 must be set to value 3.

RS485 communication requires the ABB communication module FSCA. This module needs to be configured. Parameter

154.03 and 154.23 must be set to value 3.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

24

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

Q_AC Reactive power

R_ISO Insulation resistance

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PVS 980

For connection of PVS980 only inverters with firmware (DTC) version ≥ 1.41 get supported.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

25

PVS, TRIO, TRIO-TM, UNO-DM-PLUS (SunSpec)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 35

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 2

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

If the device provides SunSpec models from more than one SunSpec device type the total amount of devices varies that can

be connected to a blue’Log. E.g. For ABB inverters with additional string monitoring technology (SX2, SY2 models), it is only

possible to connect up to 50 devices to one blue’Log.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the following inverters need at least the following firmware versions:

Inverter model | Firmware Inverter | Firmware Q1 (Logger)

PVS-50-TL | 1901B | 1.6.9

PVS-60-TL | 1901C | 1.6.9

PVS-100-TL | 1912B | 0.14.9

PVS-120-TL | 1912C | 0.14.9

PVS-175-TL | 1916F | 0.2.8

26

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

For ABB inverters with additional string monitoring technology (SX2, SY2 models) the SunSpec String Combiner Model 403

is also supported.

SUPPORTED DEVICES

PVS series

PVS-50-TL PVS-60-TL PVS-60-TL-CN

PVS-60-TL-US PVS-100.0-400-EU PVS-120.0-480-EU

PVS-175.0-800-EU PVS-175.0-800-EU_A.1

TRIO series

TRIO-50.0-TL-OUTD TRIO-50.0-TL-OUTD-JP TRIO-50.0-TL-OUTD-US

TRIO-60.0-TL-OUTD TRIO-60.0-TL-OUTD-US

TRIO-TM series

TRIO-TM-50.0-400 TRIO-TM-60.0-480 TRIO-TM-60.0-480-US

UNO-DM-PLUS series

UNO-DM-1.2-TL-PLUS UNO-DM-2.0-TL-PLUS UNO-DM-3.3-TL-PLUS-US

UNO-DM-3.8-TL-PLUS UNO-DM-3.8-TL-PLUS-US UNO-DM-4.0-TL-PLUS

UNO-DM-4.6-TL-PLUS UNO-DM-5.0-TL-PLUS UNO-DM-5.0-TL-PLUS-US

UNO-DM-6.0-TL-PLUS UNO-DM-6.0-TL-PLUS-US

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

27

TRIO-20.0/27.6-TL-OUTD

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.05 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

For connection of TRIO-20.0/27.6-TL-OUTD only devices with "Communication Board Firmware Version" E10D get

supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

"Fast stop" is only being supported in case the “Remote on/off” function is enabled in the inverter.

ALARM MONITORING

Alarm monitoring: Yes

28

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC (1,...x) Power DC string (1,...x)

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

TRIO series

TRIO-20-TL-OUTD-400 TRIO-20-TL-OUTD-480 TRIO-27.6-TL-OUTD-400

TRIO-27.6-TL-OUTD-480

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

29

ULTRA 750/1100/1500Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 4

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 3

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

30

MEASUREMENT VALUES RECORDED

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ULTRA series

ULTRA 750 ULTRA 1100 ULTRA 1500

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

31

UNO, TRIO, PVI, PVI-CENTRAL, REACT, ULTRA, PLUS, CORE (Aurora Protocol)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 31

Protocol: AURORA

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 2

Timings

Timeout: 0.5 seconds

Delay: 0.035 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

In case String Boxes from ABB should be connected to inverters of the series Plus, Central, Core, Ultra the blue’Log would

automatically create a string combiner device for every device connected during the inverter scan.

Depending on the amount of ABB string boxes connected to each inverter the total amount of devices varies that can be

connected to one blue’Log.

The maximum number of ABB string boxes which can be connected are:

- Ultra series: 80

- Plus / Central / Core series: 12

Communication via ABB Aurora protocol is very time critical to receive 1 minute measured values in time. If the cable

connections to the inverters are not ideal or if an inverter has problems it can lead to data gaps in the monitoring for the whole

RS485 bus. If possible use Modbus or SunSpec communication if the inverter supports it. Please check the other available ABB

drivers from blue'Log. e.g. the newer models from the TRIO series support both protocols ABB Aurora and ABB Modbus,

SunSpec.

Please note inverters from the series PVI-Central, PVI-Ultra and PVI-Core consist of several inverter modules/units with

seperate RS485 addresses. During the scan the blue'Log will create an inverter device for each module/unit.

-PVI -Central: 6 modules

-PVI -Ultra: 4 modules

-PVI - Core: 2 modules

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

32

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Power Control in CLOSED-LOOP mode is only possible in case the controller sample time on the blue’Log got configured.

meteocontrol recommendation is to choose a slower controller sample time than 500 ms.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CORE series

CORE-500.0-TL CORE-1000.0-TL PVI-500.0-TL-CN

33

PLUS series

PVI-55.0 PVI-55.0-TL PVI-110.0

PVI-110.0-TL PVI-134.0-TL PVI-165.0

PVI-165.0-TL PVI-200.0-TL PVI-220.0

PVI-220.0-TL PVI-267.0-TL PVI-275.0

PVI-275.0-TL PVI-330.0 PVI-330.0-TL

PVI-334.0-TL PVI-400.0-TL PVI-CENTRAL-50-US-208

PVI-CENTRAL-50-US-480 PVI-CENTRAL-100-US-208 PVI-CENTRAL-100-US-480

PVI-CENTRAL-250-CAN PVI-CENTRAL-250-US PVI-CENTRAL-300-CAN

PVI-CENTRAL-300-US

PLUS-STATION series

PLUS-STATION-530.0 PLUS-STATION-665.0 PLUS-STATION-800.0

PLUS-STATION-930.0 PLUS-STATION-1065.0 PLUS-STATION-1200.0

PVI series

3-phase interface (3G74) 11.0 KVA Universal (output 400 VAC) 13.8 KVA Universal (output 400 VAC)

PVI-3.0-OUTD PVI-3.6-OUTD PVI-3.8-I-OUTD

PVI-3.8-OUTD PVI-4.2-OUTD PVI-4.6-I-OUTD

PVI-6.0-OUTD Universal (output 400 VAC) PVI-6.0-TL-OUTD PVI-8.0-OUTD Universal

PVI-8.0-OUTD Universal PLUS PVI-8.0-TL-OUTD PVI-10.0-I-OUTD (output 208 VAC)

PVI-10.0-I-OUTD (output 380 VAC) PVI-10.0-I-OUTD (output 480 VAC – current limit 12 A) PVI-10.0-I-OUTD (output

480 VAC)

PVI-10.0-I-OUTD (output 600 VAC) PVI-10.0-OUTD PVI-10.0-OUTD Universal

PVI-10.0-TL-OUTD PVI-12.0-I-OUTD (output 208 VAC) PVI-12.0-I-OUTD (output 380 VAC)

PVI-12.0-I-OUTD (output 480 VAC) PVI-12.0-I-OUTD (output 600 VAC) PVI-12.5-OUTD

PVI-12.5-OUTD Universal PVI-12.5-TL-OUTD PVI-1700-IND

PVI-1700-OUTD PVI-2000 PVI-2000-OUTD

PVI-3600 PVI-3600-OUTD PVI-5000-OUTD

PVI-6000-OUTD

REACT series

REACT-3.6-TL REACT-4.6-TL REACT-UNO-3.6-TL

REACT-UNO-4.6-TL

TRIO series

TRIO-5.0-TL-OUTD TRIO-5.8-OUTD (output 400 VAC) TRIO-7.5-OUTD (output 400 VAC)

TRIO-8.5-OUTD (output 400 VAC) TRIO-20-TL TRIO-20.0 (output 480 VAC)

TRIO-25.0-OUTD TRIO-27.6 (output 480 VAC) TRIO-27.6-TL

TRIO-50.0-TL-OUTD TRIO-50.0-TL-OUTD-JP TRIO-50.0-TL-US

TRIO-60.0-TL-OUTD TRIO-60.0-TL-OUTD-US TRIO-TM-50.0-400 / TRIO-TM-60.0-480

ULTRA series

ULTRA-700.0-TL ULTRA-750.0-TL ULTRA-1050.0-TL

ULTRA-1100.0-TL ULTRA-1400.0-TL ULTRA-1500.0-TL

ULTRA-MVC series

ULTRA-MVC-770.0 ULTRA-MVC-1160.0 ULTRA-MVC-1550.0

ULTRA-MVC-1940.0 ULTRA-MVC-2330.0 ULTRA-MVC-2720.0

ULTRA-MVC-3110.0

ULTRA-MVC-S series

ULTRA-MVC-770.0-S ULTRA-MVC-1160.0-S ULTRA-MVC-1550.0-S

ULTRA-MVC-1940.0-S ULTRA-MVC-2330.0-S ULTRA-MVC-2720.0-S

ULTRA-MVC-3110.0-S

34

UNO series

UNO-2.0-I UNO-2.0-TL-OUTD UNO-2.0-TL-OUTD-US

UNO-2.5-I UNO-3.0-TL-OUTD UNO-3.0-TL-OUTD-US

UNO-3.6-TL-OUTD UNO-3.8-TL-OUTD UNO-4.2-TL-OUTD

UNO-7.6-TL-OUTD UNO-8.6-TL-OUTD

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

35

Advanced Energy

PVPXXXX_PVP30KW/AExxxTX

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 83

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.01 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

36

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

STATE (1,...x) Status (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PVP30/AExxxTX series

AE35TX AE50TX AE75TX

AE100TX AE250TX/AE260TX AE500TX

PVP30KW

PVPxxxx series

PVP4600

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

37

AEG

Protect Pv

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 64

Protocol: DANFOSS_COM_LYNX

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 0

Timings

Timeout: 1 seconds

Delay: 0.005 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

38

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Protect PV series

Protect PV 8 Protect PV 10 Protect PV 12.5 k

Protect PV 15 k

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

39

AETI

Integrated Solar Inversion System (ISIS)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 0.2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

40

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

COS_PHI1 Power factor (cos phi) phase 1

COS_PHI2 Power factor (cos phi) phase 2

COS_PHI3 Power factor (cos phi) phase 3

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

STATE (1,...x) Status (1,...x)

S_AC Apparent power

S_AC1 Apparent power phase 1

S_AC2 Apparent power phase 2

S_AC3 Apparent power phase 3

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Integrated Solar Inversion System (ISIS)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

41

Albatech

APL

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 247

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8E1

Frame settings default: 8E1

Default address: 247

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note when connecting Albatech inverters the communication settings of the inverters need to be set to:

-Bus speed: 19200 bps

-Frame settings: 8E1

-OneBasedAddress: false

-Word/Byte-Order: High

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

42

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

APL15 APL20

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

43

ARM Solar

AEC Trinergy Plus Series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 19

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

44

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Trinergy Plus 10kW Trinergy Plus 20kW Trinergy Plus 30kW

Trinergy Plus 40kW Trinergy Plus 50kW Trinergy Plus 60kW

Trinergy Plus 70kW

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

45

AROS (Riello)

SIRIO K12 - K800 central inverter

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 49

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note for connection of inverters without a touch screen display:

-Connection via Modbus RTU only possible with additional MODCOM PV card

-Connection via Modbus TCP does not get supported

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

46

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

STATE (1,...x) Status (1,...x)

T Temperature

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sirio Central Inverters series

Sirio K12 Sirio K15 Sirio K18

Sirio K25 Series Sirio K33 Series Sirio K40 Series

Sirio K64 Series Sirio K80 Series Sirio K100 Series

Sirio K200 Series Sirio K250 Series Sirio K330 Series

Sirio K500 Series Sirio K800 Series

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

47

Astrid Energy Enterprises

Copernico TT/TLBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 48

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N2, 8O1, 8E1

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

48

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

STATE (1,...x) Status (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Copernico TT/TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

49

ATESS Power

HPSBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 68

Protocol: ModbusRTU

Bus speed: 2400 bps, 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

50

MEASUREMENT VALUES RECORDED

B_CAPACITY Nominal capacity

B_CHARGE_LEVEL Charging status

B_P_DC Battery power

B_U_DC Battery voltage

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

HPS series

HPS30 HPS50 HPS100

HPS120 HPS150 HPS250

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

51

Canadian Solar

CSI series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.3 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Reactive power control - Q control is only possible for the models CSI-30KTL-GI-FL ID 47, CSI-30KTL-GS-FL ID 4C with

version ≥22

ALARM MONITORING

Alarm monitoring: Yes

52

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CSI-3KTL1P-GI-FL CSI-4KTL1P-GI-FL CSI-5K-T400GL01-E

CSI-5KTL1P-GI-FL CSI-6K-T400GL01-E CSI-7KTL1P-GI-FL

CSI-8K-T400GL01-E CSI-8KTL1P-GI-FL CSI-9KTL1P-GI-FL

CSI-10K-T400GL01-E CSI-10KTL1P-GI-FL CSI-12K-T400GL01-E

CSI-15K-T400GL01-E CSI-15KTL-GI-LFL CSI-17K-T400GL01-E

CSI-20K-T400GL01-E CSI-20KTL-GI-FL CSI-20KTL-GI-LFL

CSI-25K-T400GL02-E CSI-25KTL-GI-FL CSI-25KTL-GI-L

CSI-25KTL-GS-FL CSI-30K-T400GL02-E CSI-30KTL-GI-FL

CSI-30KTL-GI-L CSI-30KTL-GS-FL CSI-33K-T400GL02-E

CSI-36K-T400GL02-E CSI-36KTL-GS-FL CSI-40K-T400GL02-E

CSI-40K-T500GL02-E CSI-40KTL-GI-FL CSI-40KTL-GI-HFL

CSI-40KTL-GS-FL CSI-50K-T500GL02-E CSI-50KTL-GI

CSI-50KTL-GI-HFL CSI-60KTL-GI CSI-60KTL-GI-H

CSI-75K-T400GL02-E CSI-100K-T400GL02-E CSI-100K-T400GL02-ZA

CSI-110K-T400GL02-E CSI-110K-T400GL02-ZA CSI-125K-T600GL02-E

CSI-125KTL-GI-E CSI-255K-T800GL02-E

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

53

Chint

CPS Series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 74

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

54

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CPS series

SCA14KTL-DO/US-208 SCA20KTL-DO SCA25KTL-DO

SCA30KTL-DO SCA36KTL-DO SCA50KTL-DO

SCA50KTL-DO/US-480 SCA60KTL-DO SCA60KTL-DO/US-480

SCA500KTL-H SCA1000KTL-H SCH100KTL

SCH275KTL SCH1250K SCH1500K

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

55

CPS-T/SA SeriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 68

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

56

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SCA3KTL_SM SCA4KTL_SM SCA5KTL_SM

SCA6KTL_SM SCA16KTL_SA SCA16KTL_T

SCA18KTL_SA SCA18KTL_T SCA30KTL_SA

SCA30KTL_T SCA36KTL_SA SCA36KTL_T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

57

Danfoss

DLX, FLX, TLX, ULX

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: DANFOSS_ETHER_LYNX

Port: 48004

Default address: 0

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 64

Protocol: DANFOSS_COM_LYNX

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 0

Timings

Timeout: 1 seconds

Delay: 0.005 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note that Danfoss considers RX/TX A ( - ) and RX/TX B ( + ). When connecting Danfoss inverters via RS485 to

blue’Log A and B need to be changed.

TLX Pro supports Ethernet communication.

Scan on RS485 takes several minutes to finish without visible progress in between.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Only TLX inverter with software version ≥ 1.04 are supporting active Power Control. Only TLX+ inverter support active and

reactive Power Control.

ULX inverter with software version ≥ 1.82 support active and reactive Power Control. With software version > 1.67 and < 1.82

only reactive Power Control is possible.

DLX inverter don't support Power Control.

ALARM MONITORING

Alarm monitoring: Yes

58

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

DLX series

DLX 2.0 DLX 2.9 DLX 3.8

DLX 4.6

FLX series

FLX Pro 5 FLX Pro 6 FLX Pro 7

FLX Pro 8 FLX Pro 9 FLX Pro 10

FLX Pro 12.5 FLX Pro 15 FLX Pro 17

TLX series

TLX series 6 k TLX series 8 k TLX series 10 k

TLX series 12.5 k TLX series 15 k

ULX series

ULX 1800 ULX 3600 ULX 5400

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

59

Delta

DelCEN 1000Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 0.5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

I_AC Current AC

P_AC Power AC

P_DC Power DC

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

60

SUPPORTED DEVICES

DelCEN 1000

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

61

M (Q@night, only Q method) (SunSpec)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 72

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

For communication via SunSpec the inverters must be configured accordingly. (please see inverter manufacturer

documentation for more information).

If the device provides SunSpec models from more than one SunSpec device type the total amount of devices varies that can

be connected to a blue’Log. E.g. For Delta inverters with additional string monitoring technology (e.g. Delta M88H), it is only

possible to connect up to 50 devices to one blue’Log.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): Yes

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Only inverters with firmware version 1.19 get supported.

You must activate the "Constant Q, 24/7" mode from the inverter via inverter display or Delta service software DSS to use the

Remote power compensation function. Configure it only for the inverters at the plant which should do the remote power

compensation. The other ones should stay in the mode "Constant Q".

Please note that it is not possible to use the drivers "Delta M (SunSpec)" and "Delta M (Q@night, only Q method)

(SunSpec)" on the same RS485 bus.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

62

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

M15A M20A M30A

M42U M50A M60U

M70A M80U M88H

M125HV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

63

M (SunSpec)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 72

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

For communication via SunSpec the inverters must be configured accordingly. (please see inverter manufacturer

documentation for more information).

If the device provides SunSpec models from more than one SunSpec device type the total amount of devices varies that can

be connected to a blue’Log. E.g. For Delta inverters with additional string monitoring technology (e.g. Delta M88H), it is only

possible to connect up to 50 devices to one blue’Log.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please note that it is not possible to use the drivers "Delta M (SunSpec)" and "Delta M (Q@night, only Q method)

(SunSpec)" on the same RS485 bus.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

64

SUPPORTED DEVICES

M15A M20A M30A

M42U M50A M60U

M70A M80U M88H

M125HV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

65

SI, SOLIVIA, SOL, TL, RPI (Delta protocol)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: DELTA

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Power Control in CLOSED-LOOP mode is only possible in case the controller sample time on the blue’Log got configured.

meteocontrol recommendation is to choose a slower controller sample time than 500 ms.

Only the models RPI M50A and RPI M30A support the function "Fast stop".

ALARM MONITORING

Alarm monitoring: Yes

66

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

R_AC Supply impedance

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

GRIDFIT series

Gridfit 1900/2200

RPI series

RPI H3 RPI H3A RPI H3A Flex

RPI H4A RPI H4A Flex RPI H5

RPI H5A RPI H5A Flex RPI M6

RPI M6A RPI M8 RPI M8A

RPI M10 RPI M10A RPI M12

RPI M15A RPI M20A RPI M30

RPI M30A RPI M50A

SI series

SI 2500 SI 3300 SI 5000

SOL series

SOL 5.0 2TL3 S4

67

SOLIVIA series

SOLIVIA 2.0 EU G4 TR SOLIVIA 2.5 AP G3 SOLIVIA 2.5 EU G3

SOLIVIA 2.5 EU G4 TR SOLIVIA 2.5 NA G4 SOLIVIA 3.0 AP G3

SOLIVIA 3.0 EU G3 SOLIVIA 3.0 EU G4 TR SOLIVIA 3.0 EU T4 TL

SOLIVIA 3.0 NA G4 SOLIVIA 3.0 NA G4 TL SOLIVIA 3.3 AP G3

SOLIVIA 3.3 EU G3 SOLIVIA 3.3 EU G4 TR SOLIVIA 3.3 NA G4

SOLIVIA 3.6 AP G3 SOLIVIA 3.6 EU G3 SOLIVIA 3.6 EU G4 TR

SOLIVIA 3.6 NA G4 SOLIVIA 3.8 NA G4 TL SOLIVIA 4.4 EU G4 TR

SOLIVIA 4.4 NA G4 SOLIVIA 5.0 AP G3 SOLIVIA 5.0 EU G3

SOLIVIA 5.0 EU G4 TR SOLIVIA 5.0 EU T4 TL SOLIVIA 5.0 NA G4

SOLIVIA 5.0 NA G4 TL SOLIVIA 5.2 NA G4 TL SOLIVIA 6.0 EU T4 TL

SOLIVIA 6.6 NA G4 TL SOLIVIA 7.6 NA G4 TL SOLIVIA 8.0 EU T4 TL

SOLIVIA 10 EU G4 TR (EVR) SOLIVIA 10 EU T4 TL SOLIVIA 11 EU G4 TR

SOLIVIA 11 EU G4 TR (EVR) SOLIVIA 12 EU G4 TL SOLIVIA 12 EU T4 TL

SOLIVIA 15 EU G4 TL SOLIVIA 15 EU TL SOLIVIA 20 EU G4 TL

SOLIVIA 20 EU TL SOLIVIA 30 EU T4 TL SOLIVIA CM

SOLIVIA CS

TL series

DELTA 15 TL DELTA 20 TL DELTA 24 TL

DELTA 28 TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

68

Diehl Ako

PLATINUM

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 31

Protocol: DIEHL_AKO

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 0

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note it is possible to connect "String Modules" to Diehl AKO inverters. In case "String Modules" connected the

blue'Log will automatically set up a string combiner device for each "String Module" connected to the inverter. Depending on the

amount of "String Modules" connected the max. amount of devices varies which can get connected to one blue'Log.

Values of the "Power Modules" can get visualized via the inverter.

The scan of a single Diehl AKO inverter can last up to 45 seconds.

It is not possible to scan individual inverters. Only a complete RS485 bus can get scanned.

With Diehl AKO inverters it is possible to start the scan of the RS485 bus not only from a data logger but also from single

inverters part of the bus. The driver does not support this function. In case a scan of the RS485 bus has been carried out from

an inverter this can lead to a communication error. In such cases meteocontrol recommends a restart of the blue'Log as well as

a completely new scan of all inverters connected carried out by the blue'Log.

Diehl AKO inverters with protocol version 5.0 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please note in CLOSED-LOOP only "Active power control" or "Reactive power control" is possible. "Active power control"

and "Reactive power control" at the same time only possible in OPEN-LOOP.

ALARM MONITORING

Alarm monitoring: Yes

69

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I (1,...x) Current DC (1,...x)

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PLATINUM C series

100CS 100CTL 125CTL

PLATINUM R3-M series

7000R3-MDX 7000R3-MDXP 9000R3-MDX

9000R3-MDXP 11000R3-MDX 11000R3-MDXP

14000R3-MDX 14000R3-MDXP 16000R3-MDX

16000R3-MDXP

PLATINUM S series

2100S 2800S 3100S

3501S 3800S 4300S

4301S 4600S 4601S

4602S

PLATINUM TL series

4300TL 4800TL 5300TL

6300TL 7200TL

PLATINUM TL3 (3xTL) series

11000TL3 13000TL3 17000TL3

22000TL3

70

PLATINUM TLD series

3800TLD 3801TLD 4300TLD

4800TLD 5300TLD 6300TLD

7200TLD

PLATINUM TLD series (3xTLD) series

13000TLD (TLxD) 16000TLD (TLxD) 19000TLD (TLxD)

22000TLD (TLxD) 22001TLD (TLxD)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

71

EEI

8YF

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

72

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

8YF

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

73

Emerson

Unidrive SPV1Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

P_AC Power AC

T Temperature

U_AC Voltage AC

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

74

SUPPORTED DEVICES

Unidrive SPV1 series

SPV 145 SPV 175 SPV 350

SPV 525 SPV 700 SPV 875

SPV 1060 SPV 1230 SPV 1410

SPV 1590

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

75

Unidrive SPV2Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 23

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8O1, 8E1, 8N2, 8O2, 8E2, 7N1, 7O1, 7E1, 7N2, 7O2, 7E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

76

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_DC Current DC total

P_AC Power AC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T Temperature

U_AC Voltage AC

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Unidrive SPV2 series

SPV 248 SPV 300 SPV 600

SPV 900 SPV 1200 SPV 1500

SPV 1800 SPV 2100 SPV 2400

SPV 2700

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

77

FIMER

PVS-10/33-TLBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 72

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

78

SUPPORTED DEVICES

PVS-10-TL PVS-12.5-TL PVS-15-TL

PVS-20-TL PVS-30-TL PVS-33-TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

79

R400 - R5000TLBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 65

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

80

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

R400 R800 R1200

R2500TL R5000TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

81

FRIEM

RECon 30 Central Inverter (firmware > 2.42.0)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 115200 bps

Bus speed default: 38400 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

FRIEM RECon central inverters consist of several inverter modules (up to 6) and string combiners (up to 18).

Depending on the combination of modules and string combiners the total amount of devices varies that can be connected to one

blue’Log (e.g. 1 FRIEM RECon central inverter with 6 inverter modules + 18 string combiner = 24 devices).

Please note for connection of FRIEM RECon inverters with only a RS232 interface an additional RS232/RS485 converter is

required for connection via Modbus RTU.

Please note for FRIEM RECon inverters with firmware version up to 2.42.0 the communication via Modbus TCP can't get

used for monitoring.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

82

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

F_AC Grid frequency

I (1,...x) Current DC (1,...x)

I_AC Current AC

I_DC Current DC total

P_AC Power AC

U_AC Voltage AC

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RECon 30 Central Inverter (firmware > 2.42.0)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

83

RECon Central Inverter (firmware > 5.2.xx)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 8000

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 38400 bps

Bus speed default: 38400 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

FRIEM RECon central inverters with firmware > 5.2.xx get supported.

FRIEM RECon central inverters consist of several inverter modules (up to 6) and string combiners (up to 18).

Depending on the combination of modules and string combiners the total amount of devices varies that can be connected to one

blue’Log (e.g. 1 FRIEM RECon central inverter with 6 inverter modules + 18 string combiner = 24 devices).

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

84

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

F_AC Grid frequency

I (1,...x) Current DC (1,...x)

I_AC Current AC

I_DC (1,...x) Current DC string (1,...x)

I_SUM Sum of DC currents

P_AC Power AC

Q_AC Reactive power

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RECon series

FRIEM stringboxes RECon Centralized Inverters

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

85

Fronius

Datamanager 2.0 / GEN24 / Tauro

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 51

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Communication via Modbus must be activated on the Fronius Datamanager 2.0 first.

On the Fronius Datamanager 2.0 the Sunspec Model type "int + SF" needs to be selected.

It is recommended that not more than 6 inverters get connected to a single Datamanager 2.0 for monitoring purpose.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

In case of Power Control requirements "Inverter control via Modbus" needs to be activated on the Fronius Datamanager 2.0.

Please consider that meteocontrol recommends not to connect more than 6 inverters to a single Datamanager 2.0 in case

Power Control should be required.

ALARM MONITORING

Alarm monitoring: Yes

86

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Datamanager 2.0 plug-in card with Fronius Com Card function series

Fronius CL Fronius CL USA Fronius IG

Fronius IG 300 - 500 Fronius IG Plus Fronius IG Plus A

Fronius IG Plus V

Datamanager 2.0 plug-in card without Fronius Com Card function series

Fronius Eco Fronius Galvo Fronius Primo

Fronius Symo

Datamanager Box 2.0 series

Fronius Agilo Fronius Agilo Outdoor Fronius Agilo TL

Fronius CL Fronius CL USA Fronius Eco

Fronius Galvo Fronius IG Fronius IG 300 - 500

Fronius IG Plus Fronius IG Plus A Fronius IG Plus V

Fronius Primo Fronius Symo

GEN24 series

Primo GEN24 Symo GEN24

Tauro series

Tauro D Tauro ECO 50 D Tauro ECO 50 P

Tauro ECO 100 D Tauro ECO 100 P Tauro P

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

87

Fronius SolarNet Inverter

COMMUNICATION

Communication interface: RS422

Max. number of devices per bus: 100

Protocol: SOLAR_NET

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 57600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 7N1, 7N2, 7E1, 7E2

Frame settings default: 8N1

Default address: 0

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

To communicate with the inverter via SolarNet protocol a Full duplex (4 Wires) cabling via RS422 is necessary. It is possible

to use both the two RS485 interfaces of the blue'Log XM / XC base module and the MX-MODULE RS485/422. On the blue'Log

base module the four inputs (starting from left) of each RS485 interface can get used for connections via RS422 SolarNet

protocol.

For cablings via RS422 via RS485 base module interfaces (Inputs from left to right) Rx+ ; Rx- ; Tx+ ; Tx- ; GND

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: No

88

MEASUREMENT VALUES RECORDED

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

R_AC Supply impedance

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T Temperature

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Agilo series

Fronius Agilo 75.0-3 Fronius Agilo 75.0-3 Outdoor Fronius Agilo 100.0-3

Fronius Agilo 100.0-3 Dummy Fronius Agilo 100.0-3 Outdoor Fronius Agilo TL 360.0-3

Fronius Agilo TL 460.0-3

CL series

Fronius CL 33.3 Delta Fronius CL 36.0 Fronius CL 36.0 WYE277

Fronius CL 44.4 Delta Fronius CL 48.0 Fronius CL 48.0 WYE277

Fronius CL 55.5 Delta Fronius CL 55.5 Delta Dummy Fronius CL 60.0

Fronius CL 60.0 Dummy Fronius CL 60.0 WYE277 Fronius CL 60.0 WYE277 Dummy

Eco series

FRONIUS Eco 25.0-3-S FRONIUS Eco 27.0-3-S FRONIUS Symo 15.0-3 208

Galvo series

Fronius Galvo 1.5-1 Fronius Galvo 1.5-1 208-240 Fronius Galvo 2.0-1

Fronius Galvo 2.0-1 208-240 Fronius Galvo 2.5-1 Fronius Galvo 2.5-1 208-240

Fronius Galvo 3.0-1 Fronius Galvo 3.1-1 Fronius Galvo 3.1-1 208-240

Fronius Galvo 3.1-1 Dummy

89

IG series

Fronius IG 15 Fronius IG 20 Fronius IG 30

Fronius IG 30 Dummy Fronius IG 40 Fronius IG 50

Fronius IG 60 ADV Fronius IG 60 HV Fronius IG 300

Fronius IG 400 Fronius IG 500 Fronius IG 2000

Fronius IG 2500-LV Fronius IG 3000 Fronius IG 4000

Fronius IG 4500-LV Fronius IG 5100 Fronius IG Plus 35

Fronius IG Plus 50 Fronius IG Plus 70 Fronius IG Plus 100

Fronius IG Plus 120 Fronius IG Plus 150 Fronius IG TL 3.0

Fronius IG TL 3.6 Fronius IG TL 4.0 Fronius IG TL 4.6

Fronius IG TL 5.0 Fronius IG TL Dummy

IG Plus series

Fronius IG Plus 3.0-1 UNI Fronius IG Plus 3.8-1 UNI Fronius IG Plus 5.0-1 UNI

Fronius IG Plus 6.0-1 UNI Fronius IG Plus 7.5-1 UNI Fronius IG Plus 10.0-1 UNI

Fronius IG Plus 11.4-1 UNI Fronius IG Plus 11.4-3 Delta Fronius IG Plus 12.0-3 WYE277

Fronius IG Plus 25 V-1 Fronius IG Plus 30 V-1 Fronius IG Plus 35 V-1

Fronius IG Plus 50 V-1 Fronius IG Plus 50 V-1 Dummy Fronius IG Plus 55 V-1

Fronius IG Plus 55 V-2 Fronius IG Plus 55 V-3 Fronius IG Plus 60 V-1

Fronius IG Plus 60 V-2 Fronius IG Plus 60 V-3 Fronius IG Plus 70 V-1

Fronius IG Plus 70 V-2 Fronius IG Plus 80 V-3 Fronius IG Plus 100 V-1

Fronius IG Plus 100 V-2 Fronius IG Plus 100 V-2 Dummy Fronius IG Plus 100 V-3

Fronius IG Plus 120 V-1 Fronius IG Plus 120 V-3 Fronius IG Plus 150 V-3

Fronius IG Plus 150 V-3 Dummy Fronius IG Plus V 3.8-1 Dummy Fronius IG Plus V 7.5-1 Dummy

Fronius IG Plus V 12.0-3 Dummy Fronius IG Plus V/A 3.0-1 UNI Fronius IG Plus V/A 3.8-1 UNI

Fronius IG Plus V/A 5.0-1 UNI Fronius IG Plus V/A 6.0-1 UNI Fronius IG Plus V/A 7.5-1 UNI

Fronius IG Plus V/A 10.0-1 UNI Fronius IG Plus V/A 10.0-3 Delta Fronius IG Plus V/A 11.4-1 UNI

Fronius IG Plus V/A 11.4-3 Delta Fronius IG Plus V/A 12.0-3 WYE

Other series

Fronius G24 Serie Remote Plant

Primo series

Fronius Primo 3.0-1 Fronius Primo 3.5-1 Fronius Primo 3.6-1

Fronius Primo 3.8-1 208-240 Fronius Primo 4.0-1 Fronius Primo 4.6-1

Fronius Primo 5.0-1 Fronius Primo 5.0-1 208-240 Fronius Primo 6.0-1

Fronius Primo 6.0-1 208-240 Fronius Primo 7.6-1 208-240 Fronius Primo 8.2-1

Fronius Primo 8.2-1 208-240 Fronius Primo 8.2-1 Dummy Fronius Primo 10.0-1 208-240

Fronius Primo 11.4-1 208-240 Fronius Primo 12.5-1 208-240 Fronius Primo 15.0-1 208-240

Fronius Primo Hybrid 3.6-1 Fronius Primo Hybrid 4.0-1 Fronius Primo Hybrid 4.6-1

Fronius Primo Hybrid 5.0-1 Fronius Primo Hybrid 5.0-1 240 Fronius Primo Hybrid 6.0-1

Fronius Primo Hybrid 6.0-1 240 Fronius Primo Hybrid 8.0-1 Fronius Primo Hybrid 8.0-1 240

Fronius Primo Hybrid 10.0-1 Fronius Primo Hybrid 10.0-1 240 Fronius Primo Hybrid 11.4-1

Fronius Primo Hybrid 11.4-1 240

SPR series

SPR 3001F-1 EU SPR 3300F EU/A 3.8-1 UNI SPR 3300f/A 12.0-3 WYE

SPR 3501F-1 EU SPR 4000F EU/A 3.0-1 UNI SPR 4000f/A 11.4-3 Delta

SPR 4001F-1 EU SPR 6500F EU SPR 6500f/A 11.4-1 UNI

SPR 6501F-2 EU SPR 8000F EU SPR 8000f/A 10.0-3 Delta

SPR 8001F-2 EU SPR 8001F-3 EU SPR 10000F EU

SPR 10000f/A 10.0-1 UNI SPR 10001F-3 EU SPR 11400f-3 208/240/A 7.5-1 UNI

SPR 12000F EU SPR 12000f-277/A 5.0-1 UNI SPR 12000f/A 6.0-1 UNI

SPR 12001F-3 EU SPR-3301f-1 UNI SPR-3801f-1 UNI

SPR-6501f-1 UNI SPR-7501f-1 UNI SPR-10001f-1 UNI

SPR-11401f-1 UNI SPR-11401f-3 Delta SPR-12001f-3 WYE277

90

Symo series

Fronius Symo 3.0-3-M Fronius Symo 3.0-3-S Fronius Symo 3.7-3-M

Fronius Symo 3.7-3-S Fronius Symo 4.5-3-M Fronius Symo 4.5-3-S

Fronius Symo 5.0-3-M Fronius Symo 5.5-3-M Fronius Symo 6.0-3-M

Fronius Symo 6.7-3-M Fronius Symo 7.0-3-M Fronius Symo 8.2-3-M

Fronius Symo 8.2-3-M Dummy Fronius Symo 10.0-3 208-240 Fronius Symo 10.0-3 480

Fronius Symo 10.0-3-M Fronius Symo 12.0-3 208-240 Fronius Symo 12.5-3 480

Fronius Symo 12.5-3-M Fronius Symo 15.0-3 480 Fronius Symo 15.0-3-M

Fronius Symo 17.5-3 480 Fronius Symo 17.5-3-M Fronius Symo 20.0-3 480

Fronius Symo 20.0-3 Dummy Fronius Symo 20.0-3-M Fronius Symo 22.7-3 480

Fronius Symo 24.0-3 480 Fronius Symo 24.0-3 USA Dummy Fronius Symo Hybrid 3.0-3-S

Fronius Symo Hybrid 4.0-3-S Fronius Symo Hybrid 5.0-3-S Symo Advanced 10.0-3 208-240

Symo Advanced 12.0-3 208-240 Symo Advanced 15.0-3 480 Symo Advanced 20.0-3 480

Symo Advanced 22.7-3 480 Symo Advanced 24.0-3 480

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

91

Gamesa Electric

Inverter III 500kW

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8E1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

92

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Inverter III 500kW

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

93

Gefran

APVS1XFBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 59

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

94

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

APV-S-10K-AE-TL1 APV-S-12K-AE-TL1 APV-S-15K-EE-TL1

APV-S-20K-EE-TL1

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

95

APVS2XFBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 58

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

96

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

APV-S-10K-AE-TL2 APV-S-12K-AE-TL2 APV-S-15K-AE-TL2

APV-S-18K-AE-TL2 APV-S-20K-AE-TL2

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

97

APVS3XFBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 58

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

98

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

APV-S-10K-EE-TL3 APV-S-20K-AE-TL3

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

99

APVX2MBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

OT_AC_TOTAL Total operating hours

P_AC Power AC

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

100

SUPPORTED DEVICES

APV-1700-2M-TL APV-2300-2M-TL APV-3100-2M-TL

APV-3800-2M-TL APV-4400-2M-TL APV-5200-2M-TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

101

APVX4TLBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

102

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

APV-10K-4-TL-DM APV-12K-4-TL-DM APV-18K-4-TL-DM

APV-20K-4-TL-DM

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

103

Ginlong

Solis

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.3 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Reactive power control - Q control is only possible for the models Solis-30K/33K ID 47, Solis 30K-Us ID 4C with version ≥22

and Solis-3P5K-4G ID 77, Solis-3P5K-4G-LV (220V) ID 8A, Solis-3P5K-4G (AU) ID 8D with version ≥ 4.

ALARM MONITORING

Alarm monitoring: Yes

104

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

105

SUPPORTED DEVICES

Solis-1P4K-4G Solis-1P5K-4G Solis-1P7K-4G

Solis-1P8K-4G Solis-1P9K-4G Solis-1P10K-4G

Solis-3P5K-4G Solis-3P5K-4G (AU) Solis-3P5K-4G-LV

Solis-3P6K-4G Solis-3P6K-4G (AU) Solis-3P6K-4G-LV

Solis-3P8K-4G Solis-3P8K-4G (AU) Solis-3P9K-4G

Solis-3P9K-4G (AU) Solis-3P10K-4G Solis-3P10K-4G (AU)

Solis-3P10K-4G-LV Solis-3P12K-4G Solis-3P12K-4G (CN)

Solis-3P15K-4G Solis-3P15K-4G (CN) Solis-3P15K-4G-HV

Solis-3P17K-4G Solis-3P20K-4G Solis-6K

Solis-6K-LV Solis-10K Solis-10K-LV

Solis-15K Solis-15K-LV Solis-15K-LV-5G

Solis-20K Solis-20K-HV Solis-20K-LV

Solis-20K-LV-5G Solis-23K-LV-5G Solis-25K

Solis-25K-5G Solis-25K-LV Solis-25K-US

Solis-30K-5G Solis-30K-LV Solis-30K-US

Solis-30K/33K Solis-33K-5G Solis-36K-5G

Solis-36K-HV/-36K-US/-36K-US-SW Solis-36K-US-F Solis-40K

Solis-40K-5G Solis-40K-HV/-40K-US/-40K-US-SW Solis-40K-US-F

Solis-50K Solis-50K-HV-US-F Solis-50K-HV/-50K-HV-US

Solis-50K-US-F-SW Solis-60K-4G Solis-60K-HV/-60K-US-F

Solis-66K-US-F Solis-70K-HV Solis-70K-HV-4G

Solis-80K-5G Solis-100-K-EHV-5G Solis-100K-5G

Solis-100k-5G-SA Solis-100K-HV-5G Solis-110K-5G

Solis-110k-5G-SA Solis-110K-BHV-5G Solis-125-K-EHV-5G

Solis-208K-EHV Solis-255K-EHV Solis-255K-EHV-5G

Solis-Mini-700-4G Solis-Mini-1000-4G Solis-Mini-1500-4G

Solis-Mini-2000-4G Solis-Mini-2500-4G Solis-Mini-3000-4G

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

106

GoodWe

ET seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 99

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

107

MEASUREMENT VALUES RECORDED

B_CHARGE_LEVEL Charging status

B_E_EXP Energy from storage system

B_E_IMP Energy to storage system

B_I_DC Battery current

B_P_DC Battery power

B_U_DC Battery voltage

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

GW5K-ET GW6.5K-ET GW8K-ET

GW10K-ET

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

108

MT, XS, NS, DNS, HF, SDT-G2, SDT, DT, SMT

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 67

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

109

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

DNS series

GW3000D-NS GW3600D-NS GW4200D-NS

GW5000D-NS GW6000D-NS

DT series

GW17K-DT GW20K-DT GW25K-DT

HF series

GW5KHV-HF GW3000-HF GW5000D-HF

LVMT series

GW30KLV-MT GW35KLV-MT GW50KLV-MT

LVSMT series

GW15KLV-MT GW20KLV-MT

MT series

GW50K-MT GW50KBF-MT GW50KN-MT

GW60K-MT GW60KBF-MT GW60KN-MT

GW70KHV-MT GW80K-MT GW80KBF-MT

GW80KHV-MT

NS series

GW1000-NS GW1500-NS GW2000-NS

GW2500-NS GW3000-NS

SDT series

GW10KN-DT GW12KLN-DT GW12KN-DT

GW15KN-DT GW17KN-DT GW20KN-DT

GW4000-DT GW5000-DT GW6000-DT

GW8000-GT

110

SDT-G2 series

GW4K-DT GW5K-DT GW6K-DT

GW8K-DT GW10KT-DT GW12KT-DT

GW15KT-DT GW17KT-DT GW20KT-DT

GW25KT-DT

SMT series

GW25K-MT GW30K-MT GW36K-MT

GW36KN-MT

XS series

GW700-XS GW1000-XS GW1500-XS

GW2000-XS GW2500-XS GW3000-XS

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

111

GPTech

PV seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 98

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

112

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PV500WD-INT-O PV540WD-INT-O PV630WD-INT-O

PV675WD-INT-O PV750WD-INT-O PV800WD-INT-O

PV900WD-INT-O PV975WD-INT-O

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

113

Growatt

750~3000 SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

114

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

750~3000 S series

750-S 1000-S 1500-S

2000-S 2500-S 3000-S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

115

2500~5500 MTL-SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

116

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

2500~5500 MTL-S series

2500MTL-S 3000MTL-S 3600MTL-S

4200MTL-S 5000MTL-S 5500MTL-S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

117

3000~6000 TL3-SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

118

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

3000~6000 TL3-S series

3000TL3-S 4000TL3-S 5000TL3-S

6000TL3-S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

119

7000~11000 TL3-SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

120

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

7000~11000 TL3-S series

7000TL3-S 8000TL3-S 9000TL3-S

10000TL3-S 11000TL3-S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

121

10000~20000 UEBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

122

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

10000~20000 UE series

10000UE 20000UE

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

123

12000~15000 TL3-SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

124

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

12000~15000 TL3-S series

12000TL3-S 13000TL3-S 15000TL3-S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

125

17000~25000 TL3-SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

126

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

17000~25000 TL3-S series

17000TL3-S 20000TL3-S 25000TL3-S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

127

30000~50000 TL3-SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only inverters with firmware 3.15 and higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

To support Power Control the inverters need at least the firmware version 3.15.

ALARM MONITORING

Alarm monitoring: Yes

128

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

30000~50000 TL3-S series

30000TL3-S 33000TL3-S 40000TL3-S

50000TL3-S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

129

MAC xx KTL3 x LVBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 23

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

130

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MAC xx KTL3 x LV series

MAC 40KTL3-X LV MAC 50KTL3-X LV MAC 60KTL3-X LV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

131

MAX xx KTL3 LV/MVBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 23

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

132

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MAX xx KTL3 LV/MV series

MAX 50KTL3 LV MAX 60KTL3 LV MAX 60KTL3 MV

MAX 70KTL3 LV MAX 70KTL3 MV MAX 80KTL3 LV

MAX 80KTL3 MV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

133

SPA xxxx TL-BLBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 23

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

134

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SPA xxxx TL-BL series

SPA1000TL-BL SPA2000TL-BL SPA3000TL-BL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

135

SPA xxxx TL3-BHBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 23

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

136

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SPA xxxx TL3-BH series

SPA 4000 TL3 BH SPA 5000 TL3 BH SPA 6000 TL3 BH

SPA 7000 TL3 BH SPA 8000 TL3 BH SPA 10000 TL3 BH

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

137

SPH xxxxBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 23

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

138

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SPH xxxx series

SPH3000 SPH3600 SPH4000

SPH4600 SPH5000 SPH6000

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

139

SPH xxxx TL3-BHBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 23

Protocol: ModbusRTU

Bus speed: 9600 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

140

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SPH xxxx TL3-BH series

SPH4000TL3 BH SPH5000TL3 BH SPH6000TL3 BH

SPH7000TL3 BH SPH8000TL3 BH SPH10000TL3 BH

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

141

Huawei

SUN2000

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 0

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 41

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Direct connection of Huawei inverters to blue’Log via RS485 (Modbus RTU).

When using Huawei SmartLogger:

- connection of SmartLogger to blue’Log via Ethernet (Modbus TCP)

- blue’Log needs to be registered in the "Whitelist" of the SmartLogger

- blue'Log is compatible to SmartLogger 1000, 2000, 3000 series. Independent of the SmartLogger it's important that the

inverter is compatible and has a supported firmware installed (check supported devices)

- set on the Smartlogger in section Settings/Modbus TCP/Link setting "Enable(Unlimited)" and enter IP address of the blue’Log

- SmartLogger address needs to be set to 0

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

If inverters connected to SmartLogger "Enable" Active/Reactive power control in Settings of SmartLogger.

Set "Active/Reactive power control mode" to: "Remote scheduling" on the SmartLogger.

142

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T Temperature

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

143

SUPPORTED DEVICES

SUN2000 series

SUN2000-3KTL-M0 SUN2000-3KTL-M1 SUN2000-4KTL-M0

SUN2000-4KTL-M1 SUN2000-5KTL-M0 SUN2000-5KTL-M1

SUN2000-6KTL-M0 SUN2000-6KTL-M1 SUN2000-8KTL

SUN2000-8KTL-M0 SUN2000-8KTL-M1 SUN2000-8KTL-M2

SUN2000-10KTL SUN2000-10KTL-M0 SUN2000-10KTL-M1

SUN2000-10KTL-M2 SUN2000-12KTL SUN2000-12KTL-M0

SUN2000-12KTL-M1 SUN2000-12KTL-M2 SUN2000-15KTL

SUN2000-15KTL-M0 SUN2000-15KTL-M2 SUN2000-15KTL-M3

SUN2000-17KTL SUN2000-17KTL-M0 SUN2000-17KTL-M2

SUN2000-17KTL-M3 SUN2000-20KTL SUN2000-20KTL-M0

SUN2000-20KTL-M2 SUN2000-20KTL-M3 SUN2000-23KTL

SUN2000-23KTL-M3 SUN2000-24.5KTL SUN2000-24.7KTL-JP

SUN2000-25KTL-NAM3 SUN2000-28KTL SUN2000-28KTL-M3

SUN2000-29.9KTL SUN2000-29.9KTL-M3 SUN2000-30KTL-A

SUN2000-30KTL-M3 SUN2000-30KTL-NAM3 SUN2000-33KTL

SUN2000-33KTL-A SUN2000-33KTL-E001 SUN2000-33KTL-JP

SUN2000-33KTL-NAM3 SUN2000-33KTL-US SUN2000-36KTL

SUN2000-36KTL-M3 SUN2000-36KTL-NAM3 SUN2000-36KTL-US

SUN2000-40KTL SUN2000-40KTL-JP SUN2000-40KTL-M3

SUN2000-40KTL-NAM3 SUN2000-40KTL-US SUN2000-42KTL

SUN2000-42KTL-M3 SUN2000-43KTL-IN-C1 SUN2000-43KTL-INM3

SUN2000-44KTL-M3 SUN2000-45KTL-US-HV-D0 SUN2000-50KTL

SUN2000-50KTL-C1 SUN2000-50KTL-JPM0 SUN2000-50KTL-JPM1

SUN2000-50KTL-M0 SUN2000-50KTL-M3 SUN2000-55KTL-HV-D1

SUN2000-55KTL-HV-D1-001 SUN2000-55KTL-IN-HV-D1 SUN2000-60KTL-HV-D1

SUN2000-60KTL-HV-D1-001 SUN2000-60KTL-M0 SUN2000-63KTL-JPH0

SUN2000-63KTL-JPM0 SUN2000-65KTL-M0 SUN2000-70KTL-C1

SUN2000-70KTL-INM0 SUN2000-75KTL-C1 SUN2000-90KTL-H0

SUN2000-90KTL-H1 SUN2000-90KTL-H2 SUN2000-95KTL-INH0

SUN2000-95KTL-INH1 SUN2000-100KTL-H0 SUN2000-100KTL-H1

SUN2000-100KTL-H2 SUN2000-100KTL-INM0 SUN2000-100KTL-M0

SUN2000-100KTL-M1 SUN2000-100KTL-USH0 SUN2000-105KTL-H0

SUN2000-105KTL-H1 SUN2000-105KTL-USH0 SUN2000-110KTL-M0

SUN2000-125KTL-M0 SUN2000-168KTL-H1 SUN2000-175KTL-H0

SUN2000-185KTL-H1 SUN2000-185KTL-INH0 SUN2000-193KTL-H0

SUN2000-196KTL-H0 SUN2000-200KTL-H2 SUN2000-215KTL-H0

Only the following inverter firmwares get supported:

SUN2000 V100R001

SUN2000 V200R001

SUN2000 V200R002

SUN2000 V300R001

SUN2000 V500R001

SUN2000HA V100R001

SUN2000MA V100R001

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

144

SUN2000L

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

When using Huawei SmartLogger:

- connection of SmartLogger to blue’Log via Ethernet (Modbus TCP)

- blue’Log needs to be registered in the "Whitelist" of the SmartLogger

- blue'Log is compatible to SmartLogger 3000 series.

- set on the Smartlogger in section Settings/Modbus TCP/Link setting "Enable(Unlimited)" and enter IP address of the blue’Log

- SmartLogger address needs to be set to 0

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

145

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T Temperature

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SUN2000L series

SUN2000-2KTL SUN2000-2KTL-L0 SUN2000-3.8KTL-US

SUN2000-3.8KTL-US-4G SUN2000-3.68KTL SUN2000-3KTL

SUN2000-3KTL-CN SUN2000-3KTL-CN-4G SUN2000-3KTL-CNL0

SUN2000-3KTL-L0 SUN2000-4.6KTL SUN2000-4.6KTL-L1

SUN2000-4.95KTL-JP SUN2000-4.95KTL-JPL0 SUN2000-4.125KTL-JP

SUN2000-4KTL SUN2000-4KTL-CN SUN2000-4KTL-CN-4G

SUN2000-4KTL-CNL0 SUN2000-4KTL-L0 SUN2000-4KTL-L1

SUN2000-5KTL SUN2000-5KTL-CN SUN2000-5KTL-CN-4G

SUN2000-5KTL-L0 SUN2000-5KTL-L1 SUN2000-5KTL-US

SUN2000-5KTL-US-4G SUN2000-6KTL-CNL0 SUN2000-6KTL-L1

SUN2000-7.6KTL-US SUN2000-7.6KTL-US-4G SUN2000-7.6KTL-US-Zb

SUN2000-9KTL-US SUN2000-9KTL-US-4G SUN2000-10KTL-USL0

SUN2000-11.4KTL-US SUN2000-11.4KTL-US-4G

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

146

Ingeteam

Ingecon SUN

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 77

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

147

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Ingecon Sun 3PLAY 100TL series

TL 100kW TL 160kW

Ingecon Sun 3PLAY TL series

10 TL M 15 TL M 20 TL M

24 TL U M480 33 TL M 40 TL M480

Ingecon Sun 3PLAY TL M series

10 TL 20 TL 33 TL

Ingecon Sun Lite series

2.5 2.5 TL 3 TL

3.3 3.3 TL 3.8 TL

3.68 TL 4.6 TL 5

5 TL 6 TL

Ingecon Sun Power series

50 60 70

80 90 100

100 TL 125 TL 150 TL

180 TL 200 TL 210 TL

148

Ingecon Sun PowerMax B series

830 TL B300 890 TL B320 915 TL B330

1000 TL B360 1070 TL B385 1080 TL B390

1110 TL B400 1140 TL B410 1165 TL B420

1170 TL B450 1190 TL B430 1220 TL B440

1250 TL B450 1275 TL B460 1400 TL B540

1500 TL B578 1560 TL B600 1600 TL B615

1640 TL B630 1665 TL B640 1690 TL B650

1740 TL B670 1800 TL B690

Ingecon Sun PowerMax M series

250 TL M220 275 TL M220 315 TL M275

315HE TL M275 350 TL M275 365 TL M320

365HE TL M320 375 TL M220 375 TL NAC M220

380 TL M300 400 TL M320 400 TL M345

400HE TL M345 410 TL M220 420 TL M360

420HE TL M360 440 TL M345 460 TL M360

500 TL M275 500 TL M400 500 TL NAC M220

500HE TL M275 500HE TL NAC M275 520 TL M275

535 TL M420 550 TL M220 550 TL M320

550HE TL M320 550HE TL NAC M320 570 TL M300

600 TL M345 600HE TL M345 600HE TL NAC M345

605 TL M320 625 TL M275 625HE TL M275

625HE TL NAC M275 630 TL M360 630HE TL M360

630HE TL NAC M360 660 TL M345 690 TL M360

695 TL M275 730 TL M320 730HE TL M320

730HE TL NAC M320 750 TL M400 760 TL M300

800 TL M320 800 TL M345 800HE TL M345

800HE TL NAC M345 805 TL M420 840 TL M360

840HE TL M360 840HE TL NAC M360 880 TL M345

920 TL M360 1000 TL M400 1070 TL M420

Ingecon Sun PowerMax X series

275 TL X220 350 TL X275 380 TL X300

400 TL X320 410 TL X220 440 TL X345

460 TL X360 500 TL X400 520 TL X275

535 TL X420 550 TL X220 570 TL X300

605 TL X320 660 TL X345 690 TL X360

695 TL X275 750 TL X400 760 TL X300

800 TL X320 805 TL X420 880 TL X345

920 TL X360 1000 TL X400 1070 TL X420

Ingecon Sun Smart series

10kW 12.5kW 15kW

18kW 20kW 25kW

30kW 50kW 69kW

70kW 80kW 90kW

100kW

Ingecon Sun Smart TL series

10 TL 12.5 TL 15 TL

18 TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

149

Jema

IF 20 / 25 / 30Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

150

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF 20 / 25 / 30

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

151

IF 50 / 80 / 100Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

152

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF 50 / 80 / 100

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

153

IF500Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note Jema IF500 devices consist of two inverter modules. During the scan the blue’Log will create an inverter device

for each inverter module.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

154

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

Jema provides the value E_TOTAL for each IF500 via the first inverter module. There are no E_TOTAL values available for

the individual inverter modules.

SUPPORTED DEVICES

IF500

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

155

IF700Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 47

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

156

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF700

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

157

IF730Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 47

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

158

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF730

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

159

IF765Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 47

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

160

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF765

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

161

IF800Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 47

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

162

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF800

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

163

IF1050Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 37

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

164

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF1050

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

165

IF1100Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 37

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

166

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF1100

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

167

IF1150Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 37

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

168

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF1150

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

169

IF1200Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 37

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

170

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IF1200

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

171

KACO new energy

Powador TL3, blueplanet (SunSpec)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please make sure to enable the "Modbus TCP write access" via the inverters display in case the devices should get used for

Power Control.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

172

SUPPORTED DEVICES

blueplanet series

blueplanet 2.0 TL1 blueplanet 2.6 TL1 blueplanet 3.0 TL1

blueplanet 3.0 TL3 blueplanet 3.5 TL1 blueplanet 3.7 TL1

blueplanet 4.0 TL1 blueplanet 4.0 TL3 blueplanet 4.6 TL1

blueplanet 5.0 TL1 blueplanet 5.0 TL3 blueplanet 6.5 TL3

blueplanet 7.5 TL3 blueplanet 8.6 TL3 blueplanet 9.0 TL3

blueplanet 10.0 TL3 blueplanet 10.0 TL3 INT blueplanet 10.0 TL3 M2

blueplanet 12.0 TL3 blueplanet 14.0 TL3 blueplanet 15.0 TL3

blueplanet 18.0 TL3 blueplanet 20.0 TL3 blueplanet 23.0 TL3

blueplanet 29.0 TL3 WM blueplanet 30.0 TL3 WM blueplanet 32.0 TL3 M1

blueplanet 32.0 TL3 M3 blueplanet 40.0 TL3 M1 blueplanet 40.0 TL3 M3

blueplanet 50.0 TL3 blueplanet 50.0 TL3 M1 blueplanet 50.0 TL3 M3

blueplanet 50.0 TL3 RPO blueplanet 50.0 TL3 WM blueplanet 60.0 TL3 M1

blueplanet 60.0 TL3 M3 blueplanet 60.0 TL3 WM blueplanet 87 TL3

blueplanet 87.0 TL3 - S blueplanet 92 TL3 blueplanet 92.0 TL3 - S

blueplanet 100 TL3 blueplanet 100.0 TL3 - S blueplanet 105 TL3

blueplanet 105.0 TL3 - S blueplanet 110 TL3 blueplanet 110 TL3 - S

blueplanet 125 TL3 blueplanet 125 TL3 - S blueplanet 125 TL3 (C-Sample)

blueplanet 137 TL3 blueplanet 137 TL3 - S blueplanet 150 TL3

blueplanet 150 TL3 - S blueplanet 155 TL3 blueplanet 155 TL3 - S

blueplanet 165 TL3 blueplanet 165 TL3 - S blueplanet gridsave 14.0 TL3

blueplanet gridsave 50 TL3 - I blueplanet gridsave 50 TL3 - S blueplanet gridsave 87 TL3 - S

blueplanet gridsave 92 TL3 - S blueplanet gridsave 110 TL3 - S blueplanet gridsave 125 TL3 - S

blueplanet gridsave 137 TL3 - S blueplanet gs 50.0 TL3S - B/M blueplanet gs 50.0 TL3S - L/XL

blueplanet gs 50.0 TL3S - SECL bp voltage source 50 TL3 bp voltage source 50.0 TL3

BQ 125 TL3

Powador series

Powador 6.0 TL3 Powador 7.8 TL3 Powador 9.0 TL3

Powador 10.0 TL3 Powador 12.0 TL3 Powador 14.0 TL3

Powador 18.0 TL3 Powador 20.0 TL3 Powador 30.0 TL3

Powador 33.0 TL3 Powador 36.0 TL3 Powador 36.0 TL3 M1

Powador 37.5 TL3 Powador 39.0 TL3 Powador 39.0 TL3 M1

Powador 39.0 TL3 ZA Powador 40.0 TL3 Powador 48.0 TL3

Powador 48.0 TL3 Park Powador 50.0 TL3 Powador 60.0 TL3

Powador 72.0 TL3 Powador 72.0 TL3 Park

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

173

Powador, blueplanet (KACO protocol)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 30

Protocol: KACO

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 0.5 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Each of the following inverters 20000xi, 25000xi, 30000xi and 33000xi consists of three power modules which data need to

be requested individually. Therefore the total amount of those inverters connected to one RS485 bus is limited to 12. (1 "xi"

inverter = 1 device)

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Power Control in CLOSED-LOOP mode is only possible in case the controller sample time on the blue’Log got configured.

meteocontrol recommendation is 1000 ms or higher.

ALARM MONITORING

Alarm monitoring: Yes

174

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

E_DAY Energy generated per day

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T Temperature

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

blueplanet series

blueplanet 2.0 TL1 blueplanet 2.6 TL1 blueplanet 3.0 TL1 M1

blueplanet 3.0 TL1 M2 blueplanet 3.0 TL3 blueplanet 3.5 TL1

blueplanet 3.7 TL1 blueplanet 4.0 TL1 blueplanet 4.0 TL3

blueplanet 4.6 TL1 blueplanet 5.0 TL1 blueplanet 5.0 TL3

blueplanet 6.5 TL3 blueplanet 7.5 TL3 blueplanet 8.6 TL3 INT

blueplanet 9.0 TL3 blueplanet 10.0 TL3 INT blueplanet 15.0 TL3

blueplanet 20.0 TL3 blueplanet 29.0 TL3 WM blueplanet 32.0 TL3 M1 OD

blueplanet 32.0 TL3 M3 OD blueplanet 40.0 TL3 M1 OD blueplanet 40.0 TL3 M3 OD

blueplanet 50.0 TL3 M1 OD blueplanet 50.0 TL3 M3 OD blueplanet 50.0 TL3 RPO

blueplanet 50.0 TL3 WM blueplanet 60.0 TL3 M1 OD blueplanet 60.0 TL3 M3 OD

blueplanet 87 TL3 blueplanet 92 TL3 blueplanet 100 TL3

blueplanet 105 TL3 blueplanet 110 TL3 blueplanet 125 TL3

blueplanet 137 TL3 blueplanet 150 TL3 blueplanet 155 TL3

blueplanet 165 TL3 blueplanet 750 TL3 blueplanet 875 TL3

blueplanet 1000 TL3 blueplanet 1502xi blueplanet 2502xi

blueplanet 2901xi blueplanet 3502xi blueplanet 3601xi

blueplanet 5002xi blueplanet 6400M blueplanet 6400xi supreme

blueplanet 7600M blueplanet 7600xi supreme blueplanet gridsave 50.0 TL3

blueplanet gridsave 87 TL3-S blueplanet gridsave 92 TL3-S blueplanet gridsave 110 TL3-S

blueplanet gridsave 125 TL3-S blueplanet gridsave 137 TL3-S blueplanet PVI

blueplanet XP10U-H4 blueplanet XP10U-H6 blueplanet XP83U-H6

blueplanet XP90U-H6 blueplanet XP100U-H2 blueplanet XP100U-H4

blueplanet XP100U-H6 bp voltage source 50.0 TL3 BQ 125 TL3

175

Powador series

blueplanet 23.0 TL3 blueplanet 30.0 TL3 WM blueplanet 60.0 TL3 WM

blueplanet gridsave 14.0 TL3 blueplanet gridsave 50 TL3-I blueplanet gridsave 50 TL3-S

blueplanet gs 50.0 TL3S-B/M bp voltage source 50 TL3 Powador 6.0 TL3

Powador 7.8 TL3 Powador 9.0 TL3 Powador 10.0 TL3

Powador 12.0 TL3 Powador 14.0 TL3 Powador 14.0 TR3

Powador 16.0 TR3 Powador 18.0 TL3 Powador 18.0 TR3

Powador 20.0 TL3 Powador 30.0 TL3 Powador 30.0 TL3Y

Powador 33.0 TL3 Powador 36.0 TL3 Powador 36.0 TL3 M1

Powador 37.5 TL3 Powador 37.5 TL3Y Powador 39.0 TL3

Powador 39.0 TL3 M1 Powador 39.0 TL3Y Powador 40.0 TL3

Powador 48.0 TL3 Park Powador 50.0 TL3 Powador 52.0 TL3

Powador 60.0 TL3 Powador 72.0 TL3 Park Powador 78.0 TL3

Powador 1501xi Powador 2002 Powador 2500xi

Powador 2501xi Powador 3000 SE Powador 3000xi

Powador 3002 Powador 3200 Powador 3500xi

Powador 3501xi Powador 3600xi Powador 4000 supreme

Powador 4000xi Powador 4200 Powador 4202

Powador 4400 Powador 4500xi Powador 4501xi

Powador 5000xi Powador 5001xi Powador 5002

Powador 5300 Powador 5300 supreme Powador 5500

Powador 6002 Powador 6400 supreme Powador 6400xi

Powador 6400xi Thinfilm Powador 6400xi Thinfilm HV Powador 6600

Powador 6650 supreme Powador 6650xi Powador 6650xi Thinfilm

Powador 6650xi Thinfilm HV Powador 7200 supreme Powador 7200xi

Powador 7200xi Thinfilm HV Powador 7700 Powador 7700 supreme

Powador 7900 Powador 7900 supreme Powador 8000 supreme

Powador 8000xi Powador 8000xi Thinfilm Powador 8000xi Thinfilm HV

Powador 8600 Powador 8600 supreme Powador 9600

Powador 9600 supreme Powador 20000xi Powador 25000xi

Powador 30000xi Powador 33000xi Powador XP100 (100k)

Powador XP100 (XP100) Powador XP100-HV Powador XP200-HV

Powador XP200-HV TL Powador XP250-HV Powador XP250-HV TL

Powador XP350-HV TL Powador XP500-HV TL Powador XP500-HV TL OD

Powador XP550-HV TL Powador XP550-HV TL OD

Schueco series

SGI 9k SGI 10k SGI 12k

SGI 13,5k-T SGI 15k-T SGI 25k-02 Home

SGI 30k SGI 30k-02 Home SGI 33k

SGI 33k-02 Home SGI 1500T SGI 1500Tplus-02

SGI 2000 SGI 2000plus-02 SGI 2500

SGI 2500plus-02 SGI 2500Tplus-02 SGI 3000

SGI 3000plus-02 SGI 3500 SGI 3500plus-02

SGI 3500T SGI 3500Tplus-02 SGI 4000

SGI 4000plus-02 SGI 4000Tplus-02 SGI 4500

SGI 4500plus-02 SGI 4500T SGI 4500Tplus-02

SGI 5500 SGI 5500plus-02

SunPower series

SPR-2600K-TL-1 SPR-3600K-TL-1 SPR-4600K-TL-1

SPR-5500K-TL-1 SPR-9000K-TL3 SPR-10000K-TL3

SPR-12500K-TL3

176

Sunset series

SUN3Grid 3000 SUN3Grid 3000-02 SUN3Grid 4000

SUN3Grid 4000-02 SUN3Grid 5000 SUN3Grid 5000-02

SUN3Grid 6000 SUN3Grid 6000-02 SUN3Grid 8000

SUN3Grid 8000-02 SUNstring 3000 SUNstring 3000-02

SUNstring 4000 SUNstring 4000-02 SUNstring 5000

SUNstring 5000-02

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

177

Kostal

PIKO

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: KOSTAL

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 0.2 seconds

Delay: 0.05 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Only inverters with firmware version ≥ 3.50 support active Power Control.

For reactive Power Control the inverters need to be equipped with firmware ≥ 3.90

ALARM MONITORING

Alarm monitoring: Yes

178

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PIKO series

PIKO 3.0 PIKO 3.6 PIKO 4.2

PIKO 4.6 PIKO 5.5 PIKO 5.5 10A

PIKO 7.0 PIKO 8.3 PIKO 8.5

PIKO 10 PIKO 10.1 PIKO 12

PIKO 15 PIKO 17 PIKO 20

PIKO 36 EPC

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

179

PIKO IQ/PLENTICORE plusBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 1502

Default address: 71

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note for Kostal inverters which provide battery values connection of maximum 50 devices to one blue'Log is possible.

For certain devices the "Modbus byte order" can get selected via Modbus. The driver only supports the default byte order

"big endian".

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

180

MEASUREMENT VALUES RECORDED

B_CAPACITY Nominal capacity

B_CHARGE_LEVEL Charging status

B_P_DC Battery power

B_U_DC Battery voltage

COS_PHI Power factor (cos phi)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T Temperature

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PIKO IQ series

PIKO IQ 3.0 PIKO IQ 4.2 PIKO IQ 5.5

PIKO IQ 7.0 PIKO IQ 8.5 PIKO IQ 10

PLENTICORE plus series

PLENTICORE plus 3.0 PLENTICORE plus 4.2 PLENTICORE plus 5.5

PLENTICORE plus 7.0 PLENTICORE plus 8.5 PLENTICORE plus 10

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

181

Kstar

GSL seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 82

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

182

MEASUREMENT VALUES RECORDED

COS_PHI1 Power factor (cos phi) phase 1

COS_PHI2 Power factor (cos phi) phase 2

COS_PHI3 Power factor (cos phi) phase 3

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

500 630 750

1000 1250

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

183

KSG1K-60K

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 32

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

The driver supports the address range 1 to 32. The address 0 does not get supported.

The maximum number of 32 devices can get connected to one bus interface.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

184

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

KSG1.5KSM3 KSG1KSM3 KSG2KSM3

KSG3.2KDM3 KSG3KSM3 KSG4KDM3

KSG5KDM3 KSG6KDM3/KSG10K KSG12.5K

KSG15K KSG17K KSG20K

KSG25KHV KSG30K KSG36KHV

KSG40K KSG50K KSG50KHV

KSG60K KSG60KHV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

185

LTi ReEnergy

PVMaster II/III

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Up to 10 LTi String Combiner Boxes can get connected to a PVMaster II/ III inverter.

Depending on the amount of String Combiner Boxes connected the total amount of devices varies that can be connected to one

blue’Log (e.g. 1 x PVMaster II/ III with 10 LTi String Combiner Boxes = 11 devices).

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

186

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

COS_PHI1 Power factor (cos phi) phase 1

COS_PHI2 Power factor (cos phi) phase 2

COS_PHI3 Power factor (cos phi) phase 3

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I (1,...x) Current DC (1,...x)

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

S_AC1 Apparent power phase 1

S_AC2 Apparent power phase 2

S_AC3 Apparent power phase 3

T Temperature

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

LTi String Combiner Boxes PVMaster II PVMaster III

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

187

neoom

BLOKK inverterBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: No

188

MEASUREMENT VALUES RECORDED

B_CAPACITY Nominal capacity

B_CHARGE_LEVEL Charging status

B_E_EXP Energy from storage system

B_E_IMP Energy to storage system

B_I_DC Battery current

B_P_DC Battery power

B_U_DC Battery voltage

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

P_AC Power AC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

BLOKK inverter

Please note neeom BLOKK solutions can consist of up to 10 batteries + 32 inverter devices (e.g. 1 battery + 4 inverters = 5

devices on blue'Log) . Depending on the neeom BLOKK solution onsite the total amount of devices vary that can be connected

to one blue’Log.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

189

Power Electronics

HE / HEC / HES Series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 49

Protocol: ModbusRTU

Bus speed: 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 10

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Power Electronics inverters consist of several inverter modules (up to 10) and Disconnecting Units (1 per inverter).

Depending on the combination of modules and Disconnecting Units the total amount of devices varies that can be connected to

one blue’Log (e.g. 1 Power Electronics inverter with 6 inverter modules + 1 Disconnecting Units = 8 devices).

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

190

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

STATE (1,...x) Status (1,...x)

T Temperature

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

The driver does not support Measurement values of the "String Supervisor" from Power Electronics.

SUPPORTED DEVICES

HE series

FS0100IH FS0200IH FS0230IH

FS0250IH FS0280IH FS0300IH

FS0340IH FS0380IH FS0400IH

FS0420IH FS0460IH FS0500IH

FS0501IH FS0560IH FS0570IH

FS0600IH FS0630IH FS0680IH

FS0700IH FS0701IH FS0750IH

FS0800IH FS0801IH FS0830IH

FS0880IH FS0900IH FS0910IH

FS0970IH FS1000IH FS1001IH

FS1030IH FS1110IH FS1130IH

FS1140IH FS1250IH FS1251IH

FS1390IH

HECplus series

FS1000OH FS1003CH FS1051CH

FS1112CH FS1162CH FS1201CH

FS1271CH FS1331CH FS1391CH

FS1401CH FS1480CH FS1550CH

FS1600CH FS1620CH FS1690CH

FS1770CH FS1800CH FS1850CH

FS1901CH FS1991CH FS2000CH

FS2081CH FS2110CH FS2200CH

FS2300CH

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

191

HEM seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 39

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8O1, 8E1, 8N2, 8O2, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Power Electronics inverters from the series HEM, HEMK consist of several inverter modules (up to 6) and string combiner (1

per inverter).

Depending on the combination of modules and string combiners the total amount of devices varies that can be connected to one

blue’Log (e.g. 1 Power Electronics inverter with 6 inverter modules + 1 string combiner = 8 devices).

For a successful scan the inverter needs to be configured to one of the following operation modes: Standard, Modular or HEM.

The operation mode STATCOM does not get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

192

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I (1,...x) Current DC (1,...x)

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

HEM series series

FS3190M FS3270M FS3350M

FS3430M FS3510M

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

193

HEMK seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 51

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8O1, 8E1, 8N2, 8O2, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Power Electronics inverters from the series HEM, HEMK consist of several inverter modules (up to 6) and string combiner (1

per inverter).

Depending on the combination of modules and string combiners the total amount of devices varies that can be connected to one

blue’Log (e.g. 1 Power Electronics inverter with 6 inverter modules + 1 string combiner = 8 devices).

For a successful scan the inverter needs to be configured to one of the following operation modes: Standard, Modular or HEM.

The operation mode STATCOM does not get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

194

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I (1,...x) Current DC (1,...x)

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

HEMK series series

FS2000K FS2050K FS2100K

FS2125K FS2150K FS2180K

FS2200K FS2235K FS2285K

FS2300K FS2340K FS2445K

FS3000K FS3075K FS3150K

FS3190K FS3225K FS3270K

FS3300K FS3350K FS3430K

FS3450K FS3510K FS3670K

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

195

RCT Power

Inverter 4.0 / 5.0 / 6.0

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

196

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Inverter series

Power Inverter 4.0 Power Inverter 5.0 Power Inverter 6.0

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

197

REFU / Siemens / Schueco / LSIS / Satcon / Advanced Energy

REFUsol, SINVERT PVM, IPE, LSRP, Equinox LC, 3TL (USS Protocol)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 31

Protocol: USS_ETHERNET

Port: 21062

Default address: 0

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 31

Protocol: USS_SERIAL

Bus speed: 9600 bps, 19200 bps, 57600 bps, 115200 bps

Bus speed default: 57600 bps

Frame settings: 8E1, 8N1

Frame settings default: 8E1

Default address: 0

Timings

Timeout: 0.5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

If meteocontrol protocol is selected in the inverter settings, 8N1 (Data bits 8 bits / Parity None / Stop bit 1 bit) must be

selected as frame settings for successful scanning.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Only inverters with software version ≥ 29.21 are supporting Power Control.

ALARM MONITORING

Alarm monitoring: Yes

198

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

AE 3TL series

AE 3TL 8-IEC (CPV Gen 3) AE 3TL 8-IEC (Gen 3) AE 3TL 10-IEC (CPV Gen 3)

AE 3TL 10-IEC (Gen 3) AE 3TL 10-KR AE 3TL 12-UL (500V AFCI Gen 2)

AE 3TL 12-UL (500V Gen 2) AE 3TL 12-UL (500V Gen 3) AE 3TL 12-UL (1000V AFCI Gen 2)

AE 3TL 12-UL (1000V Gen 2) AE 3TL 12-UL (1000V Gen 3) AE 3TL 13-IEC (CPV Gen 2)

AE 3TL 13-IEC (CPV Gen 3) AE 3TL 13-IEC (Gen 2) AE 3TL 13-IEC (Gen 3)

AE 3TL 13-KR AE 3TL 16-UL (500V AFCI Gen 2) AE 3TL 16-UL (500V Gen 2)

AE 3TL 16-UL (500V Gen 3) AE 3TL 16-UL (1000V AFCI Gen 2) AE 3TL 16-UL (1000V Gen 2)

AE 3TL 16-UL (1000V Gen 3) AE 3TL 17-IEC (CPV Gen 2) AE 3TL 17-IEC (CPV Gen 3)

AE 3TL 17-IEC (Gen 2) AE 3TL 17-IEC (Gen 3) AE 3TL 17-KR

AE 3TL 20-IEC (CPV Gen 2) AE 3TL 20-IEC (CPV Gen 3) AE 3TL 20-IEC (Gen 2)

AE 3TL 20-IEC (Gen 3) AE 3TL 20-KR AE 3TL 20-UL (500V AFCI Gen 2)

AE 3TL 20-UL (500V Gen 2) AE 3TL 20-UL (500V Gen 3) AE 3TL 20-UL (1000V AFCI Gen 2)

AE 3TL 20-UL (1000V Gen 2) AE 3TL 20-UL (1000V Gen 3) AE 3TL 23-IEC (Gen 2)

AE 3TL 23-IEC (MV Gen 3) AE 3TL 23-KR (MV) AE 3TL 23-UL (500V AFCI Gen 2)

AE 3TL 23-UL (500V Gen 2) AE 3TL 23-UL (500V Gen 3) AE 3TL 23-UL (1000V AFCI Gen 2)

AE 3TL 23-UL (1000V Gen 2) AE 3TL 23-UL (1000V Gen 3) AE 3TL 24-JP (1000V)

AE 3TL 24-UL (1000V Gen 3) AE 3TL 40-IEC AE 3TL 40-KR

AE 3TL 46-IEC (MV) AE 3TL 46-KR (MV)

Equinox LC series

Equinox LC CE 8kw Equinox LC CE 10kw Equinox LC CE 13kw

Equinox LC CE 17kw Equinox LC CE 20kw Equinox LC UL 12kw

Equinox LC UL 16kw Equinox LC UL 20kw Equinox LC UL 24kw

IPE series

IPE 010 CN 04 IPE 013 CN 04 IPE 017 CN 04

IPE 020 CN 04 IPE 8000 SN 04 SN 04

LSRP series

LSRP-T010L LSRP-T013L LSRP-T017L

LSRP-T020L

199

REFUsol series

REFUsol 008K REFUsol 08K REFUsol 008K (CPV)

REFUsol 10K REFUsol 010K REFUsol 010K (CPV)

REFUsol 10K with Performer REFUsol 10K with Performer (Belgium) REFUsol 11K

REFUsol 12K REFUsol 12K grounded REFUsol 12K with Performer

REFUsol 012K-UL REFUsol 013K REFUsol 13K

REFUsol 013K (CPV) REFUsol 15K REFUsol 15k control cabinet

REFUsol 15K grounded Modules REFUsol 15K with Performer REFUsol 15K without DC switch

REFUsol 016K REFUsol 016K-UL REFUsol 017K

REFUsol 17K REFUsol 017K (CPV) REFUsol 020K

REFUsol 20K REFUsol 020K (CPV) REFUsol 020K (SCI)

REFUsol 020K grounded Modules REFUsol 20K-2T REFUsol 020K-UL

REFUsol 22-JP REFUsol 023K-460 VAC REFUsol 23K-MV

REFUsol 24-UL REFUsol 24-UL (AFCI) REFUsol 024K-UL

REFUsol 33K-2T REFUsol 40K REFUsol 46K-MV

REFUsol 48K-UL REFUsol 48K-UL (AFCI) REFUsol 50K-3T

REFUsol 100K REFUsol 100KW REFUsol 100KW 430VDC Spain

REFUsol 100KW DE REFUsol 100KW ES REFUsol 100KW IT

REFUsol 160KW REFUsol 333K REFUsol 500KW

REFUsol 630K REFUstore 50K REFUstore 50K-PC

REFUstore 88K REFUstore 88K-PC

SINVERT PVM series

SINVERT PVM10 SINVERT PVM12 UL SINVERT PVM13

SINVERT PVM16 UL SINVERT PVM17 4DC SINVERT PVM17 6DC

SINVERT PVM20 SINVERT PVM20 UL SINVERT PVM24 UL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

200

Riello

RS seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 68

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

201

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RS 1.5 RS 2.0 RS 3.0

RS 4.0 RS 5.0 RS 6.0

RS 6.0 T RS 10.0 T RS 15.0 T

RS 20.0 T RS 25.0 T RS 30.0 T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

202

SAJ

Suntrio Plus

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

203

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

COS_PHI1 Power factor (cos phi) phase 1

COS_PHI2 Power factor (cos phi) phase 2

COS_PHI3 Power factor (cos phi) phase 3

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Suntrio Plus

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

204

Santerno

Sunway TG

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 93

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 38400 bps

Frame settings: 8N2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

205

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunway TG series

Sunway TG 14 600V Sunway TG 19 600V Sunway TG 26 600V

Sunway TG 35 800V Sunway TG 42 600V Sunway TG 57 800V

Sunway TG 61 600V Sunway TG 82 800V Sunway TG 82 800V LT

Sunway TG 90 600V Sunway TG 100 800V Sunway TG 110 600V

Sunway TG 120 800V Sunway TG 120 800V LT Sunway TG 135 600V

Sunway TG 145 800V Sunway TG 145 800V LT Sunway TG 175 800V TE

Sunway TG 180 600V TE Sunway TG 230 600V TE Sunway TG 240 800V TE

Sunway TG 280 600V TE Sunway TG 290 600V TE Sunway TG 300 800V TE

Sunway TG 310 800V TE Sunway TG 365 600V TE Sunway TG 385 800V TE

Sunway TG 455 600V TE Sunway TG 485 800V TE Sunway TG 550 600V TE

Sunway TG 610 800V TE Sunway TG 610 1000V TE Sunway TG 610 1000V TE LT

Sunway TG 610 1100V TE Sunway TG 730 800V TE Sunway TG 750 900V TE

Sunway TG 750 1000V TE Sunway TG 760 1000V TE Sunway TG 900 1500V TE

Sunway TG 1200 1000V TE Sunway TG 1200 1100V TE Sunway TG 1800 1500V TE

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

206

Satcon

PowerGate Plus < 100kW

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 7N1, 7E1, 7O1, 7N2, 7E2, 7O2, 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

207

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PowerGate Plus 30 PowerGate Plus 50 PowerGate Plus 75

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

208

PowerGate Plus > 100kW

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 7N1, 7E1, 7O1, 7N2, 7E2, 7O2, 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

209

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PowerGate Plus 100 PowerGate Plus 135 PowerGate Plus 250

PowerGate Plus 375 PowerGate Plus 500

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

210

Schneider Electric

Conext CL SERIES

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 54

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8O1, 8N1, 8E2, 8O2, 8N2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Inverters of the Schneider Electric Conext CL 18/20/25 kVA series support different reactive power methods depending on

the country setting of the inverter. (please see inverter manufacturer documentation for more information).

ALARM MONITORING

Alarm monitoring: Yes

211

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Conext CL series

Conext CL 60A Conext CL 60E Conext CL 125

PVSCL18NA PVSCL20E PVSCL25E

PVSCL25NA

Conext CL 36 series

Conext CL 36

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

212

Conext Core XC

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 80

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8O1, 8N1, 8E2, 8O2, 8N2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): Yes

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

You must activate the PVCQ mode from the inverter via user interface to use the Remote power compensation function.

ALARM MONITORING

Alarm monitoring: Yes

213

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

STATE (1,...x) Status (1,...x)

S_AC Apparent power

S_AC1 Apparent power phase 1

S_AC2 Apparent power phase 2

S_AC3 Apparent power phase 3

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Conext Core XC series

XC540 XC540-BB XC630

XC630-BB XC680 XC680-BB

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

214

Conext SmartGen

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 39

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8O1, 8N1, 8E2, 8O2, 8N2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 0.01 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Schneider Electric Conext Smartgen inverters consist of 2 inverter modules and one meter.

Therefore the total amount of Smartgen inverters is limited to 33. (33 x 3 submodules = 99 devices).

Please note that IP address range from 192.168.0.0 to 192.168.0.255 is reserved by Schneider Electric Conext SmartGen

inverters. Please make sure that IP addresses in this range do net get used by other devices.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

215

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

P_AC Power AC

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

216

The actually recorded values may vary due to the device model or the device firmware.

The values from the meter module (M_XX_XX) are displayed in the meter device category.

SUPPORTED DEVICES

Conext SmartGen CE series

CS1800 CS2000 CS2200

CS2400

Conext SmartGen NA series

CS1666-1-NA CS1666-2-NA CS1666-3-NA

CS1800 CS2000 CS2200

CS2400

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

217

Shenzhen INVT Electric

iMars series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 19

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

218

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

BG1K5TL BG2K2TL BG3KTL

BG4KTL BG4KTR BG4KTR-S

BG5KTL BG5KTR BG5KTR-S

BG6KTL BG6KTR BG8KTR

BG10KTR BG12KTR BG15KTR

BG17KTR BG20KTR BG25KTR

BG30KTR BG33KTR BG35KTR

BG40KTR BG40KTR-HV BG50KTR

BG50KTR-HV BG50KTR-LD BG60KTR

BG60KTR-LD BG70KTR BG70KTR-LD

BG80KTR-MD EG4K6TL EG4K6TL-2M

EG4KTL EG4KTL-2M EG5KTL

EG5KTL-2M MG1K5TL MG1KTL

MG2KTL MG3KTL MG3KTL-2M

MG4K6TL MG4K6TL-2M MG4KTL

MG4KTL-2M MG5KTL MG5KTL-2M

MG6KTL-2M MG750TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

219

SIEL

10TL Solar InverterBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

220

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

T Temperature

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SolarInverter 10 TL SolarInverter 80 TL SolarInverter 100 TL

SolarInverter 125 TL SolarInverter 200 TL SolarInverter 250 TL

SolarInverter 400 TL SolarInverter 500 TL

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

221

Monophase Solar InverterBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

I_AC Current AC

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

T Temperature

U_AC Voltage AC

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

222

SUPPORTED DEVICES

Monophase Solar Inverter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

223

Solar ConverterBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

224

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Solar Converter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

225

Soleil

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

226

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Soleil 10 Soleil 15 Soleil 20

Soleil 25 Soleil 30 Soleil 40

Soleil 50 Soleil 60 Soleil 80

Soleil 100 Soleil 125 Soleil 200

Soleil 250 Soleil DSPx

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

227

Siliken

SE100Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

228

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SE100

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

229

SMA

SC (SMA Data)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 31

Protocol: SMA_DATA_ETHERNET

Port: 24272

Default address: 0

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 31

Protocol: SMA_DATA

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 0

Timings

Timeout: 10 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

In case String Boxes from SMA should be connected to inverters from SMA the blue’Log would automatically create a string

combiner device for every String Box connected during the inverter scan.

Depending on the amount of string boxes connected to each inverter the total amount of devices varies that can be connected

to one blue’Log.

e.g. 1 x SMA inverter + 5 x String boxes = 6 devices for the blue'Log

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

230

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

R_AC Supply impedance

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

S_AC1 Apparent power phase 1

S_AC2 Apparent power phase 2

S_AC3 Apparent power phase 3

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SC series

SC 100 SC 100LV SC 125LV

SC 150 SC 200 SC 200HE

SC 250 SC 250HE SC 350

SC 350HE SC 400HE-11 SC 400LV-11

SC 500HE SC 500HE-10 SC 500HE-11

SC 560HE SC 560HE-10 SC 560HE-11

SC 630HE-10 SC 630HE-11

231

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

232

SHP3, STP, SB, SBS, SI (SunSpec)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 126

Remote Device Access: No

Timings

Timeout: 10 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

SMA inverters require Speedwire/Webconnect interfaces for communication via SMA SunSpec.

In addition, the Modbus TCP server of the inverters needs to be activated, since this is deactivated at the factory for the

supported SMA devices (please see inverter manufacturer documentation for more information).

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please note with SMA inverters it is not possible to use the option "Method switch" in case it should get switched between

"Reactive power control - Q control" and "Power factor control - Cos φ control" via Modbus. The inverters do not support the

switch between those methods via Modbus.

Before being able to do Power Control with SMA inverters it is neccessary to set the Power Control mode (P_AC, Q_AC,

COS_PHI) at the inverters.

Please note models from the series Sunny Highpower PEAK3 have an active power threshold configured per default, which

prevents reactive power control below this threshold. Please get in touch with SMA in case this threshold needs to be adjusted.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

233

SUPPORTED DEVICES

Sunny Highpower PEAK3 series

SHP 100-20 SHP 100-JP-20 SHP 125-US-20

SHP 150-20 SHP 150-JP-20 SHP 150-US-20

Sunny Island series

Sunny Island 3.0M Sunny Island 4.4M Sunny Island 6.0H

Sunny Island 8.0H

Sunny Tripower series

STP 3.0 STP 4.0 STP 5.0

STP 6.0 STP 8.0 STP 10.0

STP 50-40 (CORE1) STP 50-JP-40 (CORE1-JP) STP 50-US-40 (CORE1-US)

STP 5000TL-20 STP 6000TL-20 STP 7000TL-20

STP 8000TL-20 STP 9000TL-20 STP 10000TL-10

STP 10000TL-20 STP 10000TLEE-JP-10 STP 10000TLEE-JP-11

STP 11000TL-20 STP 12000TL-10 STP 12000TL-20

STP 12000TL-US-10 STP 15000TL-10 STP 15000TL-30

STP 15000TL-US-10 STP 15000TLEE-10 STP 17000TL-10

STP 20000TL-30 STP 20000TL-US-10 STP 20000TLEE-10

STP 20000TLEE-JP-11 STP 24000TL-US-10 STP 25000TL-30

STP 25000TL-JP-30 STP 30000TL-US-10 STP33-US-41 (STP33-US-41)

STP50-41 (STP50-41) STP50-JP-41 (STP50-JP-41) STP50-US-41 (STP50-US-41)

STP62-US-41 (STP62-US-41)

SunnyBoy series

SB 2500TLST-21 SB 3000TL-21 SB 3000TL-US-22

SB 3000TLST-21 SB 3500TL-JP-22 SB 3600SE-10

SB 3600TL-21 SB 3800TL-US-22 SB 4000TL-21

SB 4000TL-US-22 SB 4500TL-JP-22 SB 5000SE-10

SB 5000TL-21 SB 5000TL-US-22 SB 6000TL-US-22

SB 7000TL-US-22 SB 7700TL-US-22 SB1.5-1VL-40

SB2.5-1VL-40 SB3.0-1AV-40 SB3.0-1SP-US-40

SB3.6-1AV-40 SB3.8-1SP-US-40 SB4.0-1AV-40

SB5.0-1AV-40 SB5.0-1SP-US-40 SB6.0-1SP-US-40

SB7.0-1SP-US-40 SB7.7-1SP-US-40

SunnyBoy Storage series

SBS2.5-1VL-40

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

234

SMA Modbus

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 3

Remote Device Access: No

Timings

Timeout: 10 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note when connecting SMA Sunny Islands the total amount of devices varies that can be connected to one blue’Log.

1 x Sunny Island consists of 1 x inverter, 1 x battery and 1 x meter device on the blue’Log. The blue’Log will automatically set up

the devices during the scan.

Please note only Client / Slave IDs from 3-123 are supported by SMA.

Please note with SMA inverters it is not possible to use the option "Method switch" in case it should get switched between

"Reactive power control - Q control" and "Power factor control - Cos φ control" via Modbus. The inverters do not support the

switch between those methods via Modbus.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please note with SMA inverters it is not possible to use the option "Method switch" in case it should get switched between

"Reactive power control - Q control" and "Power factor control - Cos φ control" via Modbus. The inverters do not support the

switch between those methods via Modbus.

ALARM MONITORING

Alarm monitoring: Yes

235

MEASUREMENT VALUES RECORDED

B_CAPACITY Nominal capacity

B_CHARGE_LEVEL Charging status

B_E_EXP Energy from storage system

B_E_IMP Energy to storage system

B_I_DC Battery current

B_LIM_I_CHARGE Maximum charge current

B_LIM_I_DISCHARGE Maximum discharge current

B_LIM_U_DISCHARGE Battery final cut-off voltage

B_OT_TOTAL Operating Hours

B_SOH Current battery capacity in %

B_U_DC Battery voltage

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

S_AC1 Apparent power phase 1

S_AC2 Apparent power phase 2

S_AC3 Apparent power phase 3

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunny Highpower PEAK1 series

SHP 100-20 (SHP 100k-20) SHP 100-JP-20 (SHP 100k-JP-20) SHP 125-US-20 (SHP 125k-US-20)

SHP 150-20 (SHP 150k-20) SHP 150-JP-20 (SHP 150k-JP-20) SHP 150-US-20 (SHP 150k-US-20)

236

Sunny Island series

SI3.0M-11 SI4.4M-11 SI4.4M-12

SI4.4M-13 SI6.0H-11 SI6.0H-12

SI6.0M-13 SI8.0H-11 SI8.0H-12

SI8.0M-13

Sunny Tripower series

STP 5000TL-20 STP 6000TL-20 STP 7000TL-20

STP 8000TL-10 STP 8000TL-20 STP 9000TL-20

STP 10000TL-10 STP 10000TL-20 STP 10000TLEE-JP-10

STP 10000TLEE-JP-11 STP 11000TL-20 STP 12000TL-10

STP 12000TL-20 STP 12000TL-US-10 STP 15000TL-10

STP 15000TL-30 STP 15000TL-US-10 STP 15000TLEE-10

STP 17000TL-10 STP 20000TL-30 STP 20000TL-US-10

STP 20000TLEE-10 STP 20000TLEE-JP-11 STP 24000TL-US-10

STP 24500TL-JP-30 STP 25000TL-30 STP 25000TL-JP-30

STP 30000TL-US-10 STP33-US-41 (STP33-US-41) STP50-40 (STP50-40)

STP50-41 (STP50-41) STP50-JP-40 (STP50-JP-40) STP50-JP-41 (STP50-JP-41)

STP50-US-40 (STP50-US-40) STP50-US-41 (STP50-US-41) STP62-US-41 (STP62-US-41)

SunnyBoy series

SB 1.5 SB 2.5 SB 2500TLST-21

SB 3000TL-21 SB 3000TL-JP-22 SB 3000TL-US-22

SB 3000TLST-21 SB 3500TL-JP-22 SB 3600SE-10

SB 3600TL-21 SB 3800TL-US-22 SB 4000TL-21

SB 4000TL-JP-22 SB 4000TL-US-22 SB 4500TL-JP-22

SB 5000SE-10 SB 5000TL-21 SB 5000TL-US-22

SB 5400TL-JP-22 SB 6000TL-US-22 SB 7000TL-US-22

SB 7700TL-US-22

SunnyBoy Storage series

SBS 2.5

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

237

SOLID-Q 50

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 84

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.01 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

238

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T Temperature

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SOLID-Q 50

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

239

SOLID-Q PRO 60Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 84

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.01 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

240

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T Temperature

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SOLID-Q PRO 60

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

241

STP 60, STPS 60, SHP 1 (SunSpec)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 126

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

For communication with the inverters a SMA Inverter Manager is required.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunny Highpower PEAK1 series

SHP 75-10 SHP 75-JP-10

Sunny Tripower series

STP 60-10 STP 60-JP-10

Sunny Tripower Storage series

STPS 60-10

242

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

243

STP 110-60 (Core2)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

244

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

STP 110-60 (Core2)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

245

STP, SB, SMC (SMA Data)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 31

Protocol: SMA_DATA

Bus speed: 1200 bps, 19200 bps

Bus speed default: 1200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 0

Timings

Timeout: 10 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Power Control in CLOSED-LOOP mode is only possible in case the controller sample time on the blue’Log got configured.

meteocontrol recommendation is to choose a slower controller sample time than 500 ms.

ALARM MONITORING

Alarm monitoring: Yes

246

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

R_AC Supply impedance

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

S_AC1 Apparent power phase 1

S_AC2 Apparent power phase 2

S_AC3 Apparent power phase 3

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

For each device it takes about 2-3 minutes after the SCAN process is finished before the monitoring of the measurement

values starts.

247

SUPPORTED DEVICES

SUNNY BOY series

SB 700-US SB 1200 SB 1500TL

SB 1700 SB 2000HF SB 2000HF-US

SB 2100TL SB 2500 SB 2500HF

SB 2500HF-US SB 3000 SB 3000-US

SB 3000HF SB 3000TL SB 3000TL RPC

SB 3000TLST-21 SB 3300 SB 3800

SB 3800-US SB 4000-US SB 4000TL

SB 4000TL RPC SB 5000-US SB 5000TL

SB 5000TL RPC SB 6000-US SB 7000-US

SB 8000-US SB 8000TL-US SB 9000TL-US

SB 10000TL-US SB 11000TL-US SB3.0-1AV-41

SB3.6-1AV-41 SB4.0-1AV-41 SB5.0-1AV-41

SB6.0-1AV-41

SUNNY MINI CENTRAL series

SMC 4600A SMC 5000A SMC 6000A

SMC 6000TL SMC 7000HV SMC 7000TL

SMC 8000TL SMC 9000TL SMC 9000TL RPC

SMC 10000TL SMC 10000TL RPC SMC 11000TL

SMC 11000TL RPC

SUNNY TRIPOWER series

STP 5000TL-20 STP 6000TL-20 STP 7000TL-20

STP 8000TL STP 8000TL-20 STP 9000TL-20

STP 10000TL-20 STP 10000TLEE-JP-10 STP 10000TLEE-JP-11

STP 12000TL STP 12000TL-20 STP 12000TL-US-10

STP 15000TL-10 Econ. Exc. STP 15000TL-30 STP 15000TL-US

STP 17000TL STP 20000TL-10 Econ. Exc. STP 20000TL-30

STP 20000TL-US-10 STP 20000TLEE-JP STP 24000TL-US-10

STP 25000TL-30 STP 30000TL-US-10 STP3.0-3AV-40

STP4.0-3AV-40 STP5.0-3AV-40 STP6.0-3AV-40

STP8.0-3AV-40 STP10.0-3AV-40

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

248

Sunny Central (1760-4600)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 3

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

blue'Log IP address must be added to the Modbus whitelist of the inverter. Otherwise the Modbus read and write requests

will be blocked from the inverter and the communciation between blue’Log and inverter doesn't work. Either enter the IP

Address manually or activate the learning mode of the inverter which is then 24 h active. The features "GSM" and "READ" must

be active.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

249

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

Find below mapping for T (1,...x):

T1 = Temperature in the AC range

T2 = Temperature in the DC range

T3 = Temperature in the electronics area

T4 = Temperature of the MV transformer

SUPPORTED DEVICES

Sunny Central series

SC-1760US SC-1850US SC-2000EV-US

SC-2000US SC-2200 SC-2200US

SC-2260UP SC-2475 SC-2500EV

SC-2500EV-US SC-2660UP SC-2750EV

SC-2750EV-US SC-2800UP SC-2930UP

SC-3000EV SC-3060UP SC-4000UP

SC-4000UP-US SC-4200UP SC-4200UP-US

SC-4400UP SC-4400UP-US SC-4600UP

SC-4600UP-US

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

250

Sunny Central (CP, CP-US, CP-JP, HE)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 0

Remote Device Access: Yes

Timings

Timeout: 5 seconds

Delay: 0.25 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Recommendation for 1 minute interval data is to limit the maximum number of devices per WebBox / SC-COM to 6. (typical 1

Inverter and 5 String Monitoring Units)

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Power Control is only supported if the inverter is equipped with SC-COM. If the inverter is equipped with WebBox please

contact SMA service about an upgrade to SC-COM.

ALARM MONITORING

Alarm monitoring: Yes

251

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunny Central series

SC 250HE SC 400HE-11 SC 500CP

SC 500CP-JP SC 500CP-US SC 500CP-US 600V

SC 500HE-10 / SC 500HE-11 SC 500HE-20 SC 630CP

SC 630CP-JP SC 630CP-US SC 630HE-11

SC 630HE-20 SC 720CP SC 720CP-US

SC 720HE-20 SC 750CP-US SC 760CP

SC 760HE-20 SC 800CP SC 800CP-JP

SC 800CP-US SC 800HE-20 SC 850CP

SC 850CP-US SC 900CP SC 900CP-US

SC 1000CP

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

252

Socomec

SUNSYS

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 61

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: Yes

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

253

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

OT_AC_TOTAL Total operating hours

P_AC Power AC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

P02 P03 P33 TR

P66 TL P66 TL1K P66 TR

P100 TL P100 TL1K P100 TR

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

254

SOFARSOLAR

SOFAR / ME / HYDBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 1

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.5 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note for connection via Modbus TCP/Modbus RTU some inverters from SOFARSOLAR only support Client (Slave

IDs) / bus addresses from 1-31. Please check with SOFARSOLAR for more information.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

255

MEASUREMENT VALUES RECORDED

COS_PHI1 Power factor (cos phi) phase 1

COS_PHI2 Power factor (cos phi) phase 2

COS_PHI3 Power factor (cos phi) phase 3

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

FT_AC_TOTAL Total feed-in hours

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

1.1-3.3KW String Inverter 3rd (Single Phase) series

SOFAR 1100TL-G3 SOFAR 1600TL-G3 SOFAR 2200TL-G3

SOFAR 2700TL-G3 SOFAR 3000TL-G3 SOFAR 3300TL-G3

3-6KW String Inverter 3rd (Single Phase) series

SOFAR 3.6KTLM-G3 SOFAR 3KTLM-G3 SOFAR 4.6KTLM-G3

SOFAR 4KTLM-G3 SOFAR 5KTLM-G3 SOFAR 6KTLM-G3

3-7.5KW String Inverter 2nd (Dual MPPT) series

SOFAR 3.6KTLM-G2 SOFAR 3KTLM-G2 SOFAR 4.6KTLM-G2

SOFAR 4KTLM-G2 SOFAR 5KTLM-G2 SOFAR 6KTLM-G2

SOFAR 7.5KTLM

3-12KW String Inverter 3rd (Three Phase) series

SOFAR 3.3KTLX-G3 SOFAR 4.4KTLX-G3 SOFAR 5.5KTLX-G3

SOFAR 5KTLX-G3(Australia) SOFAR 6.6KTLX-G3 SOFAR 8.8KTLX-G3

SOFAR 10KTLX-G3(Australia) SOFAR 11KTLX-G3 SOFAR 12KTLX-G3

3.3-12KW String Inverter (Three Phase) series

SOFAR 3.3KTL-X SOFAR 4.4KTL-X SOFAR 5.5KTL-X

SOFAR 5KTL-X(Only For Australia) SOFAR 6.6KTL-X SOFAR 8.8KTL-X

SOFAR 11KTL-X SOFAR 12KTL-X

256

10-15KW String Inverter 2nd(Three Phase) series

SOFAR 10000TL-G2 SOFAR 12000TL-G2 SOFAR 15000TL-G2

10-20KW String Inverter (Three Phase) series

SOFAR 10000TL SOFAR 15000TL SOFAR 17000TL

SOFAR 20000TL

15-24KW String Inverter 3rd (Three Phase) series

SOFAR 15KTLX-G3 SOFAR 17KTLX-G3 SOFAR 20KTLX-G3

SOFAR 22KTLX-G3 SOFAR 24KTLX-G3

20-33KW String Inverter 2nd (Three Phase) series

SOFAR 20000TL-G2 SOFAR 25000TL-G2 SOFAR 30000TL-G2

SOFAR 33000TL-G2

30-40KW String Inverter (Three Phase) series

SOFAR 30000TL SOFAR 33000TL SOFAR 36000TL

SOFAR 40000TL

50-70KW String Inverter (Three Phase) series

SOFAR 50000TL SOFAR 60000TL SOFAR 70000TL-HV

80-136KW String Inverter (Three Phase) series

SOFAR 80KTL SOFAR 100KTL SOFAR 100KTL-HV

SOFAR 125KTL-HV SOFAR 136KTL-HV

255KW String Inverter (Twelve MPPTs) series

SOFAR 250KTL-HV SOFAR 255KTL-HV

Hybrid 3K-6K-EP series

HYD 3000-EP HYD 3680-EP HYD 4000-EP

HYD 4600-EP HYD 5000-EP(Australia) HYD 5500-EP

HYD 6000-EP

Hybrid Inverter 5K-20KTL-3PH series

HYD 5KTL-3PH HYD 6KTL-3PH HYD 8KTL-3PH

HYD 10KTL-3PH HYD 15KTL-3PH HYD 20KTL-3PH

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

257

SolarEdge

SE (SunSpec)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 115200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only CCGs with firmware 3.2462 or higher get supported.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Active/reactive power control is supported by all inverters with firmware 4.xx.xx. An exact list of supported inverters with

firmware 3.xx.xx is available from the inverter manufacturer.

If Q control is required you can use the blue’Log feature “Correction value conversion”. If you select the option “cos φ

correction value” Q setpoints from the grid operator will be converted to cos φ value.

If Q control is required you can use the blue’Log feature “Correction value conversion”. If you select the option “cos φ

correction value” Q setpoints from the grid operator will be converted to cos φ value.

After saving a new power control setting on blue’Log it may lead to a stop in production of the SolarEdge inverters of up to 10

seconds.

ALARM MONITORING

Alarm monitoring: Yes

258

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SE series

SE3K SE4K SE5K

SE6K SE7K SE8K

SE9K SE10K SE10KUS

SE12.5K SE15K SE16K

SE17K SE20KUS SE25K

SE27.6K SE33.3K SE33.3KUS

SE50K SE55K SE66.6K

SE82.8K SE100K SE1000M

SE1500M SE2000M SE2200H

SE3000H SE3500H SE3680H

SE4000H SE5000H

Meters connected to the CCG do not get supported.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

259

SolarMax

SolarMax Inverter (MaxComm Protocol)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: MAX_COMM_ETHERNET

Port: 12345

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: MAX_COMM_SERIAL

Bus speed: 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 3 seconds

Delay: 0.05 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

Power Control in CLOSED-LOOP mode is only possible in case the controller sample time on the blue’Log got configured.

meteocontrol recommendation is to choose a slower controller sample time than 500 ms.

C series string inverters (2000C - 6000C) don't support Power Control.

S, P, and TP series string inverters support only active Power Control.

C, C-SV, S, and TS (not TS-SV) series central inverters support only active Power Control.

6MT2 CH, 12MT2 A, 15MT3 A and 18MT3 A inverters support only active Power Control.

Only 330, 660, 990, 1320 TS-SV inverters with software version ≥ 1.0.16053 are supporting PowerControl.

Only 360, 720, 1080, 1440 TS-SV inverters with software version ≥ 1.0.16086 are supporting PowerControl.

Only MT inverters with software version ≥ 1.0.16830 are supporting PowerControl.

Only P inverters with software version ≥ 2.1.0 are supporting active PowerControl.

260

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DC (1,...x) Current DC string (1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Central inverters series

20 20C 25C

30 30C 35C

40 45 50C

50TS 60 75TS A

80C 80TS 100

100C 100TS 125

300C 300TS MT 300TS ST

330C-SV 330TS-SV MT 330TS-SV ST

360TS-SV 360TS-SV MT 360TS-SV ST

660TS-SV MT 660TS-SV ST 720TS-SV MT

720TS-SV ST 990TS-SV MT 990TS-SV ST

1080TS-SV MT 1080TS-SV ST 1320TS-SV MT

1320TS-SV ST 1440TS-SV MT 1440TS-SV ST

261

String inverters series

4TP 5TP2 6MT2

6MT2 CH 6SMT 6TP2

7TP2 8MT2 8SMT

10MT 10MT2 10SMT

12MT2 A 13MT2 13MT3

13SMT 15MT2 15MT3

15MT3 A 15SMT 17SHT

18MT3 A 18MT3 SV 20HT2

20HT4 20S 20SHT

22SHT 25HT2 25HT4

25SHT 28SHT 30HT4

30S 30SHT 32HT2

32HT4 35S 50SHT

50SHT-S 60SHT 60SHT-S

1000SP 1500SP 2000

2000C 2000E 2000P

2000S 2000SP 2500SP

3000 3000C 3000E

3000P 3000S 3000SP

3600SP 4000 4000C

4000E 4000P 4000SP

4200C 4200S 4600P

4600SP 5000P 5000SP

6000C 6000E 6000S

6000SP

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

262

Solax Power

X3 Hybrid

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

In order to use the "Fast stop" feature on the blue’Log it is neccessary to enable the functionality at the Solax inverters first.

To enable "Fast stop" the "Inverter advanced interface password" has to be send via Modbus to register "0" by using function

code 6.

ALARM MONITORING

Alarm monitoring: Yes

263

MEASUREMENT VALUES RECORDED

B_CHARGE_LEVEL Charging status

B_I_DC Battery current

B_P_DC Battery power

B_U_DC Battery voltage

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC1 Grid frequency phase 1

F_AC2 Grid frequency phase 2

F_AC3 Grid frequency phase 3

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

P_DC (1,...x) Power DC string (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

X3 Hybrid series

X3-Hybrid-5.0-D-C X3-Hybrid-5.0-D-E X3-Hybrid-5.0-N-C

X3-Hybrid-5.0-N-E X3-Hybrid-6.0-D-C X3-Hybrid-6.0-D-E

X3-Hybrid-6.0-N-C X3-Hybrid-6.0-N-E X3-Hybrid-8.0-D-C

X3-Hybrid-8.0-D-E X3-Hybrid-8.0-N-C X3-Hybrid-8.0-N-E

X3-Hybrid-10.0-D-C X3-Hybrid-10.0-D-E X3-Hybrid-10.0-N-C

X3-Hybrid-10.0-N-E

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

264

SunGrow

SG 3125-3400HV/HV-MV/UBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 77

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 5 seconds

Delay: 0.025 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Sungrow Turnkey Stations consist of several module/inverter units. This affects the total amount of devices that can be

connected to the blue’Log. This station consists of 4 devices (3 inverter and 1 string combiner).

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

265

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I (1,...x) Current DC (1,...x)

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SG3125HV SG3125HV-MV SG3150U

SG3400HV SG3400HV-MV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

266

SG1 - SG250 (string inverter)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8O1, 8O2, 8N1, 8N2, 8E1, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Direct connection via Modbus TCP of capable Sungrow inverters to blue’Log does not get recommended.

For connection of blue’Log to Sungrow inverters via Sungrow Logger1000/3000 the below software versions are required for

the Sungrow Loggers:

-Logger3000: LOGGER-SV200.001.00.P003

-Logger1000: LOGGER-SV300.001.00.P003

In case blue'Log should get connected via RS485 to Sungrow Logger1000/3000 recommendation is to not connect more than

20 inverters to a single RS485 interface of the Logger1000/3000.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

267

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T Temperature

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

268

SUPPORTED DEVICES

String Inverter series

LP_P34KSG SG2K5-S SG3.0RT

SG3K6-D SG3KTL-EC SG4.0RT

SG4K6-D SG4KTL SG4KTL-EC

SG5.0RT SG5KTL-EC SG5KTL-MT

SG6.0RT SG6KTL-EC SG6KTL-MT

SG7.0RT SG8.0RT SG8KTL-EC

SG8KTL-M SG10KTL SG10KTL-EC

SG10KTL-M SG10KTL-MT SG10RT

SG12KTL SG12KTL-EC SG12KTL-M

SG12RT SG15KTL SG15KTL-M

SG15RT SG16K6J SG17KTL-M

SG17RT SG20KTL SG20KTL-M

SG20KU SG20RT SG25CX-SA

SG30CX SG30KJ SG30KTL

SG30KTL_V31 SG30KTL-M SG30KTL-M-V31

SG30KU SG33CX SG33K3J

SG33KTL-M SG33KTL-M-20 SG33KTL-M-V2

SG34KJ SG36CX-US SG36KTL

SG36KTL-M SG36KTL-M-20 SG36KTL-M-V2

SG36KU SG40CX SG40KTL

SG40KTL_V21 SG40KTL-M SG49K5J

SG50CX SG50KTL SG50KTL-M

SG50KTL-M-20 SG50KTL-M-V2 SG60CX-US

SG60KTL SG60KTL-M SG60KU

SG60KU-M SG75CX SG80BF

SG80HV SG80KTL SG80KTL-M

SG80KTL-M-20 SG85BF SG100CX

SG100CX-JP SG100K3 SG110CX

SG110HV-M SG111HV SG125HV

SG125HV-20 SG132TX SG136TX

SG150TX SG225HX SG250HX

SG250HX-IN SG250HX-US

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

269

SG500 - SG2500 HV/MV (turnkey station)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 63

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Sungrow Turnkey Stations consist of several module/inverter units (up to 4).

Depending on the amount of module/inverter units the total amount of devices varies that can be connected to one blue’Log

(e.g. 1 x Sungrow Turnkey Station with 4 module/inverter units = 4 devices).

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

270

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

R_ISO Insulation resistance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Turnkey Station series

SG500MX SG500MX-M SG630MX

SG630MX-M SG750MX SG800MX

SG1000 SG1000HV SG1000MX

SG1250 SG1250-MV SG1250HV

SG1250UD SG1500/SG1500UD SG1500HV

SG2000 SG2000-MV SG2500

SG2500-MV SG2500HV SG2500HV-MV

SG2500U SG2500UD SG2500UD-MV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

271

SunSpec Alliance

Compatible inverter

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 51

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

If the device provides SunSpec models from more than one SunSpec device type the total amount of devices varies that can

be connected to one blue’Log.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

272

SUPPORTED DEVICES

Compatible inverter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

273

Sunways

STS, STT

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 43

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: No

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

274

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

I_DCX_Y Current DC (1,...x).(1,...x)

OT_AC_TOTAL Total operating hours

P_AC Power AC

P_DC Power DC

P_DC (1,...x) Power DC string (1,...x)

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC Voltage AC

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

STS series

STS-3.6KTL STS-3KTL STS-4.2KTL

STS-4.6KTL STS-5KTL

STT series

STT-6KTL STT-8KTL STT-10KTL

STT-12KTL STT-15KTL STT-17KTL

STT-20KTL STT-25KTL STT-50KTL

STT-60KTL STT-70KTL-HV STT-75KTL-HV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

275

Tabuchi Electric

MBX03_US2

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 51

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: No

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 101 Model 102 Model 103

Model 122 Model 123 Model 160

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MBX03_US2

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

276

TMEIC

SOLAR WARE 100

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 93

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

277

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVF-L0100 PVF-T0100 PVF-T0100-S

PVF-T0100R

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

278

SOLAR WARE 175

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 93

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

279

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVG-L0175 PVL-L0175

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

280

SOLAR WARE 250

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

281

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVF-L0250 PVF-T0250 PVG-L0250

PVL-L0250

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

282

SOLAR WARE 490

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

283

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL-L490

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

284

SOLAR WARE 500

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 93

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

285

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVF-L0500 PVL-L0500 PVL-L0500E

PVL-L0500E(J) PVl L0500E D‐ ‐ PVL L0500E S‐ ‐PVL L0500U‐

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

286

SOLAR WARE 630

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 93

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

287

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL-L0630E PVL-L0630E(J) PVL L0630E D‐ ‐PVL L0630E S‐ ‐ PVL L0630U‐

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

288

SOLAR WARE 665

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

289

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL-L0665E

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

290

SOLAR WARE 675

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

291

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL L0675E‐

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

292

SOLAR WARE 750

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 93

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

293

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVF-L0750 PVL-L0750E PVL L0750E S‐ ‐

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

294

SOLAR WARE 833

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

295

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL-L0833GR

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

296

SOLAR WARE 1000

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

297

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVF-L1000 PVL-L1000E(J)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

298

SOLAR WARE 1000ERM

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

299

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL-L1000ERM(J)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

300

SOLAR WARE 1250

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

301

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVH-L1250ER(J) PVL-L1250ER(J)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

302

SOLAR WARE 1667

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

303

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL-L1250ER(J) PVL L1667GR‐ PVL L1667GRQ‐

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

304

SOLAR WARE 1833

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

305

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVL-L1833ERM PVL-L1833GR PVL-L1833GRM

PVL-L1833GRQ

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

306

SOLAR WARE 2220

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

307

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVH L2220E‐

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

308

SOLAR WARE 2500

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: No

Power factor control - Cos φ control: No

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

309

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVH-L2500ER(J)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

310

SOLAR WARE 2550

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

311

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVH L2550E‐

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

312

SOLAR WARE 2700

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

313

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVH-L2700ER(J)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

314

SOLAR WARE 3200

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

315

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

U_DC_NE Voltage DC negative pole to earth

U_DC_PE Voltage DC positive pole to earth

The actually recorded values may vary due to the device model or the device firmware.

Please note depending on the used setpoint method there is no value for either "P_AC_SET-ABS" (Absolute active power

setpoint) or "P_AC_SET_REL" (Relative active power setpoint) available.

SUPPORTED DEVICES

SOLAR WARE series

PVH-L3200ER(J)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

316

Yaskawa Solectria

PVI 14-60TL

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

Active power constraint: Yes

Fast stop: Yes

Reactive power control - Q control: Yes

Power factor control - Cos φ control: Yes

Reactive power compensation

(beyond feed-in operation): No

Active/reactive power control is not supported by all inverter types. An exact list is available from the inverter manufacturer.

Please check if the inverter type requires a specific configuration in order to accept Power Control commands of the

blue'Log.

Reactive power compensation beyond feed-in operation (Q at Night, STATCOM mode/operation, Q on Demand 24/7, etc.) is

not supported by all inverter types. An exact list is available from the inverter manufacturer.

ALARM MONITORING

Alarm monitoring: Yes

317

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_DAY Energy generated per day

E_TOTAL Energy total

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC (1,...x) Current DC string (1,...x)

P_AC Power AC

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC (1,...x) Voltage DC string (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PVI-14TL-208 PVI-20TL-480 PVI-23TL-480

PVI-28TL-480 PVI-36TL-480 PVI-50TL-480

PVI-60TL-480

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

318

SensorBrodersen

PT100 with converter PXT-10

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PT100 with converter PXT-10

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

319

PT1000 with converter PXT-11

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PT1000 with converter PXT-11

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

320

Campbell Scientific

CR-PVS1

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 11

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 11

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I_SC1 Short circuit current 1

I_SC2 Short circuit current 2

SLI Soiling loss

SLI_RAW Soiling loss raw

SRAD1 Irradiance 1

SRAD2 Irradiance 2

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CR-PVS1

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

321

CR-PVS2

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 11

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I_SC1 Short circuit current 1

I_SC2 Short circuit current 2

SLI Soiling loss

SRAD1 Irradiance 1

SRAD2 Irradiance 2

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CR-PVS2

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

322

contrel elettronica srl

CTT4

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8O1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CTT4 series

CTT4

CTT8 series

CTT8

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

323

CTT8

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8O1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CTT4 series

CTT4

CTT8 series

CTT8

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

324

DAVIS

VantagePro2

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_AH_REL1 Humidity, relative

E_RF_ABS1 Precipitation quantity, absolute

E_W_D Wind direction

E_W_S Wind speed

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

VantagePro2

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

325

Dini Argeo

DGT20

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 7E1, 7N1, 7E2, 7N2, 8E1, 8N1, 8E2, 8N2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SNOW_LOAD1 Snow load 1

SNOW_LOAD2 Snow load 2

SNOW_LOAD3 Snow load 3

SNOW_LOAD4 Snow load 4

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

DGT20

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

326

EKO Instruments

MS series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8O1, 8E1

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MS-40M MS-60M MS-80M

Via additional Modbus converter (MC-20) series

ML-01 MS-40 MS-60

MS-80 MS-802

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

327

Fuji Electric

Water Level Transmitter

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

WATER_DEPTH Water depth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Water Level Transmitter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

328

Huawei

SmartLogger 2000/3000 EMI

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 0

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_D Wind direction

E_W_S Wind speed

SRAD Irradiance

SRAD2 Irradiance 2

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SmartLogger 2000/3000 EMI

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

329

Hukseflux

SR Series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 7

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8O1, 8E1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 6 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_F_S Fan speed

E_IH_REL Internal relative humidity

E_IP_ABS Internal air pressure

E_TILT Sensor tilt

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SR05-D1A3 SR20-D1 SR20-D2

SR30-D1 SR30-M2-D1

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

330

SR20-TR/D2

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SR20-TR/D2

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

331

Kipp & Zonen

DustIQ

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 26

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1, 8E2, 8N2, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

For connection to the blue’Log the device needs to be configured to zero-based registers.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SLI1 Soiling loss 1

SLI2 Soiling loss 2

SR1 Soiling ratio 1

SR2 Soiling ratio 2

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

DustIQ

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

332

RaZON+

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 7E1, 7N1, 7O1, 8E1, 8N1, 8O1, 8E2, 8N2, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_SRAD Global irradiation energy

SRAD1 Irradiance 1

SRAD2 Irradiance 2

SRAD3 Irradiance 3

SUN_H Sunshine duration

The actually recorded values may vary due to the device model or the device firmware.

Irradiance 1 = Global irradiance

Irradiance 2 = Direct irradiance

Irradiance 3 = Diffuse irradiance

SUPPORTED DEVICES

RaZON+

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

333

RT1

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 38400 bps, 19200 bps, 9600 bps, 4800 bps, 2400 bps, 1200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

SRAD1 Irradiance 1

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RT1

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

334

SMPx (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SMPx (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

335

SMPx, SGRx, SHPx, PR1, PH1, SUVx (Modbus)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 26

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8O1, 8O2, 8E1, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

SRAD Irradiance

SRAD1 Irradiance 1

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PH series

PH1

PR series

PR1

RT series

SUV5

SGR series

SGR3 SGR4

SHP series

SHP1

SMP series

SMP3 SMP6 SMP10

SMP11 SMP21 SMP22

SUV series

SUV-A SUV-B SUV-E

SUV5

336

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

337

Lufft

WSxxx

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 5 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_AH_ABS1 Humidity, absolute 1

E_AH_REL1 Humidity, relative

E_ALT1 Altitude

E_AP_ABS1 Air pressure, absolute

E_AP_REL1 Air pressure, relative

E_PRECIPITATION Precipitation type

E_RF_DIF Differential precipitation

E_RF_I1 Precipitation intensity

E_W_D Wind direction

E_W_S Wind speed

E_W_S_MA (1,...x) Maximum wind speed

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

WS100 WS100(V48) WS200

WS300 WS301 WS302

WS303 WS304 WS310

WS400 WS401 WS500

WS501 WS502 WS503

WS504 WS510 WS600

WS601 WS700 WS800

338

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

339

Meier-NT

ADL-SR

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 2

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD1 Irradiance 1

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ADL-SR

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

340

meteocontrol

Hygro-Thermosensor compact

COMMUNICATION

Interface (E_AH_REL1): Multi Input (MI), 0 - 20 mA

Interface (T): Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_AH_REL1 Humidity, relative

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Hygro-Thermosensor compact

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

341

PT100 compact

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PT100 compact

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

342

Si-12TC

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-12TC

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

343

Si-12TC-T

COMMUNICATION

Interface (SRAD): Multi Input (MI), 0 - 10 V

Interface (T): Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-12TC-T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

344

Si-020TC

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-020TC

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

345

Si-020TC-T

COMMUNICATION

Interface (SRAD): Multi Input (MI), 0 - 20 mA

Interface (T): Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-020TC-T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

346

Si-420TC

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-420TC

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

347

Si-420TC-T

COMMUNICATION

Interface (SRAD): Multi Input (MI), 0 - 20 mA

Interface (T): Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-420TC-T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

348

Si-I-420

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-I-420

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

349

Si-I-420-T

COMMUNICATION

Interface (SRAD): Multi Input (MI), 0 - 20 mA

Interface (T): Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-I-420-T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

350

Si-RS485TC-2T-MB

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 27

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

Temperature 1 = Module temperature (internal measurement)

Temperature 2 = Ambient temperature

SUPPORTED DEVICES

Si-RS485TC-2T-MB

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

351

Si-RS485TC-2T-V-MB

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 27

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_S Wind speed

SRAD Irradiance

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

Temperature 1 = Module temperature (internal measurement)

Temperature 2 = Ambient temperature

SUPPORTED DEVICES

Si-RS485TC-2T-V-MB

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

352

Si-RS485TC-T-MB

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 27

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-RS485TC-T-MB

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

353

Si-RS485TC-T-Tm-MB

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 27

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

Temperature 1 = Module temperature (internal measurement)

Temperature 2 = Ambient temperature

SUPPORTED DEVICES

Si-RS485TC-T-Tm-MB

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

354

Si-V-010

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-V-010

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

355

Si-V-010-T

COMMUNICATION

Interface (SRAD): Multi Input (MI), 0 - 10 V

Interface (T): Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Si-V-010-T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

356

Ta-ext-RS485

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 27

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1, 8N2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Ta-ext-RS485

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

357

Tm-I-4090

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Tm-I-4090

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

358

Tm-RS485

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 27

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1, 8N2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Tm-RS485

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

359

Wind direction classic (0 - 10 V)

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_D Wind direction

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind direction classic (0 - 10 V)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

360

Wind direction classic (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_D Wind direction

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind direction classic (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

361

Wind direction compact (0 - 10 V)

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_D Wind direction

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind direction compact (0 - 10 V)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

362

Wind direction compact (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_D Wind direction

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind direction compact (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

363

Wind speed classic (0 - 10 V)

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_S Wind speed

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind speed classic (0 - 10 V)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

364

Wind speed classic (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_S Wind speed

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind speed classic (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

365

Wind speed compact (0 - 10 V)

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_S Wind speed

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind speed compact (0 - 10 V)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

366

Wind speed compact (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_W_S Wind speed

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Wind speed compact (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

367

NES

SOZ-03

COMMUNICATION

Interface: Multi Input (MI), 0 - 1 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

SRAD Irradiance

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SOZ-03

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

368

NOHKEN

PLD121-11 (Water depth) Analog (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

WATER_DEPTH Water depth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PLD121-11 (Water depth) Analog (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

369

Power Electronics

Protection system - HEMK + MVSKID

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note the driver only works in case blue’Log gets directly connected to MV SKID modules.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Protection system - HEMK + MVSKID

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

370

Sommer Messtechnik

USH-8/9 (0 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_SNOW_DEPTH Snow depth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

USH-8/9 (0 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

371

USH-8/9 (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_SNOW_DEPTH Snow depth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

USH-8/9 (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

372

USH-9 (Modbus)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1, 8N2, 8O1

Frame settings default: 8N1

Default address: 35

Timings

Timeout: 2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

USH-9 (Modbus)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

373

SunGrow

Logger 1000/3000 Meteo Station

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_AH_REL1 Humidity, relative

E_AP_ABS1 Air pressure, absolute

E_AP_REL1 Air pressure, relative

E_RF_ABS1 Precipitation quantity, absolute

E_W_D Wind direction

E_W_S Wind speed

SRAD1 Irradiance 1

SRAD2 Irradiance 2

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Logger 1000/3000 Meteo Station

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

374

SunSpec Alliance

Compatible sensor

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 96

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

Model 302 Model 303 Model 305

Model 307 Model 308

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Compatible sensor

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

375

Thermokon

PT1000 with integrated converter

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 V

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PT1000 with integrated converter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

376

TOKYO KEISO

UW3000 (Water depth) Analog (4 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

WATER_DEPTH Water depth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

UW3000 (Water depth) Analog (4 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

377

UW3000 (Water depth) Modbus

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 115200 bps

Frame settings: 8N1, 8O1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note the driver only supports the default display mode: DSPMODE (BotDis).

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T (1,...x) Temperature (1,...x)

WATER_DEPTH Water depth

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

UW3000 (Water depth) Modbus

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

378

Vendor-neutral

Analog input (0 - 20 mA)

COMMUNICATION

Interface: Multi Input (MI), 0 - 20 mA

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

A_IN1 Analog input 1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Analog input (0 - 20 mA)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

379

PT1000

COMMUNICATION

Interface: Multi Input (MI), 0 - 10 Ohm

Timings

Timeout: 2 seconds

Delay: 2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PT1000

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

380

MeterABB

A43/A44

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 99

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

381

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

A43 A44

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

382

B23/B24Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 94

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

383

MEASUREMENT VALUES RECORDED

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

B23/B24

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

384

CM-UFD.MxxM

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 10 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

M_AC_F Grid frequency

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CM-UFD series

CM-UFD.M22M CM-UFD.M31M CM-UFD.M33M

CM-UFD.M34M

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

385

M2M Ethernet

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.25 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

386

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I Current AC

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U Voltage AC

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

M2M Ethernet

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

387

REF615Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 85

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

388

SUPPORTED DEVICES

REF615

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

389

RET620Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 56

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

390

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RET620

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

391

RIO600 - SIM8FBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

392

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RIO600 - SIM8F

Please note that this driver doesn't support the smaller measurement module SIM4F.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

393

Accuenergy

Acudc 240

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1, 8E2, 8N2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 10 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

M_DC_E_EXP Active Energy DC (export)

M_DC_E_IMP Active Energy DC (import)

M_DC_I Current DC

M_DC_P Power DC

M_DC_U Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Acudc 240

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

394

Acuvim II

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1, 8E2, 8N2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note connection of the Acuvim-II via Modbus SunSpec not possible with the existing Modbus SunSpec driver from

meteocontrol.

It is possible to configure the "parameter mode" of the device in the system settings through the meters display. The device is

only supported if the parameter mode "Primary" got selected.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

395

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I Current AC

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_P_DEMAND Active Power Demand

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_Q_DEMAND Reactive Power Demand

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_S_DEMAND Apparent Power Demand

M_AC_U Voltage AC

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Acuvim II

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

396

AEC

USM-1

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 47

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

USM-1

397

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

398

Antarc-Automation

TicMaster (Pro)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 9600 bps, 19200 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 20

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

TicMaster series

TicMaster (Pro) Linky TicMaster (Pro) Saphir

399

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

400

Bender

LINETRAXX VMD460-NA

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8E1

Default address: 2

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

For communication via Modbus RTU an additional gateway from Bender is needed.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_F Grid frequency

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

LINETRAXX VMD460-NA

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

401

CCK

CCK6700E

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 40

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 7N1, 7O1, 7E1, 7N2, 7O2, 7E2, 8N1, 8E1, 8O1, 8N2, 8E2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note for connection of the CCK6700E via TCP a RS485 to Ethernet converter is required.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

402

MEASUREMENT VALUES RECORDED

M_AC_EQ_CAP_EXP Reactive energy (capacitive export)

M_AC_EQ_CAP_EXP_T1 Negative - Reactive Energy capacitive exported (Tariff 1)

M_AC_EQ_CAP_EXP_T2 Negative - Reactive Energy capacitive exported (Tariff 2)

M_AC_EQ_CAP_IMP Reactive energy (capacitive import)

M_AC_EQ_CAP_IMP_T1 Positive - Reactive Energy capacitive imported (Tariff 1)

M_AC_EQ_CAP_IMP_T2 Positive - Reactive Energy capacitive imported (Tariff 2)

M_AC_EQ_IND_EXP Reactive energy (inductive export)

M_AC_EQ_IND_EXP_T1 Positive - Reactive Energy inductive exported (Tariff 1)

M_AC_EQ_IND_EXP_T2 Positive - Reactive Energy inductive exported (Tariff 2)

M_AC_EQ_IND_IMP Reactive energy (inductive import)

M_AC_EQ_IND_IMP_T1 Positive - Reactive Energy inductive imported (Tariff 1)

M_AC_EQ_IND_IMP_T2 Positive - Reactive Energy inductive imported (Tariff 2)

M_AC_E_EXP Active energy (export)

M_AC_E_EXP_T1 Active energy for Tariff 1 (export)

M_AC_E_EXP_T2 Active energy for Tariff 2 (export)

M_AC_E_IMP Active energy (import)

M_AC_E_IMP_T1 Active energy for Tariff 1 (import)

M_AC_E_IMP_T2 Active energy for Tariff 2 (import)

M_AC_E_MONTH_IMP Active energy monthly (import)

M_AC_P_DEMAND_T1 Active Power Demand (Tariff 1)

M_AC_P_DEMAND_T2 Active Power Demand (Tariff 2)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CCK6700E

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

403

CEWE Instrument

Elite440Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 89

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Please note the models CEWE Elite 441 / 442 / 443 / 444 can't get used for Power Control.

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

404

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Elite440-441 Elite440-442 Elite440-443

Elite440-444 Elite440-445 Elite440-446

Elite440-447 Elite440-448

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

405

Prometer

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 85

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

406

MEASUREMENT VALUES RECORDED

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CEWEMod (Modbus converter from CEWE) Prometer

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

407

Prometer (Marcom Gateway)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

408

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Prometer (Marcom Gateway)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

409

Prometer 100

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 72

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

410

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Prometer 100

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

411

Circutor

Cirwatt B seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 73

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

412

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Cirwatt B series

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

413

CVM 96, MiniBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 73

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2, 7N1, 7N2, 7E1, 7E2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

414

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CVM series

CVM_96 CVM_MINI

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

415

CVM-C10

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 66

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2, 7N1, 7N2, 7E1, 7E2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

416

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CVM-C10

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

417

ComAp

InteliPro G59Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 64

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

The use of protection devices for the purpose of measurement with regard to active and reactive power control is generally

not recommended as protection transformers do not provide sufficient accuracy for many applications compared to instrument

transformers.

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

418

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

InteliPro G59

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

419

Daiichi Electronics

SQLC 110L

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 90

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1, 8N2, 8E2, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: No

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

420

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_EQ_CAP_EXP Reactive energy (capacitive export)

M_AC_EQ_CAP_IMP Reactive energy (capacitive import)

M_AC_EQ_IND_EXP Reactive energy (inductive export)

M_AC_EQ_IND_IMP Reactive energy (inductive import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I Current AC

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U Voltage AC

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SQLC 110L

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

421

Deep Sea Electronics

DSEP100Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

DSEP100

422

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

423

DEIF

ASC Main meterBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.02 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Depending on the amount of main meters connected to the DEIF Controller the total amount of devices varies that can be

connected to one blue’Log (e.g. 1 x DEIF ASC = up to 16 devices).

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ASC Main meter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

424

dpee

TH40 (Marcom Gateway)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

TH40 (Marcom Gateway)

425

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

426

TH40C

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 24

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

427

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

TH40C

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

428

Eaton

EDR-5000Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: No

The use of protection devices for the purpose of measurement with regard to active and reactive power control is generally

not recommended as protection transformers do not provide sufficient accuracy for many applications compared to instrument

transformers.

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

429

MEASUREMENT VALUES RECORDED

M_AC_EQ_IND_EXP Reactive energy (inductive export)

M_AC_EQ_IND_IMP Reactive energy (inductive import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

EDR-5000

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

430

IQ 35MA12 / IQ 35MA13Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 67

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

431

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IQ 35M series

IQ 35MA12 IQ 35MA13

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

432

IQ 35MA22 / IQ 35MA23Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 50

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

433

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IQ 35M series

IQ 35MA22 IQ 35MA23

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

434

METER44

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 89

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1, 8N2, 8E2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

435

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_ES_EXP Apparent energy (exported)

M_AC_E_EXP Active energy (export)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

METER44

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

436

Power Xpert Meter 2000 / IQ 250/260Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 14400 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2, 7N1, 7N2, 7E1, 7E2, 7O1, 7O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note the driver does not support the below settings:

- Data bits: 5 and 6

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

437

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IQ series

IQ250 IQ250L IQ260

IQ260L

PXM series

PXM2250 PXM2260 PXM2270

PXM2280 PXM2290

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

438

EDMI

SmartHub

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note the last two digits of the serial number of the connected meter represent the Modbus address of the device. It is

not possible to connect two meters with identical Modbus addresses to the same RS485 bus.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

439

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SmartHub series

MK10E MK10H

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

440

Electro Industries/GaugeTech

Shark 100S

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 83

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.02 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: No

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

441

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Shark 100S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

442

Shark 200/270Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 74

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.02 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

443

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Shark series

Shark 200 Shark 270

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

444

Shark 250

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 85

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.02 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

445

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Shark 250

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

446

Elster

A1500 (Marcom Gateway)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

A1500 (Marcom Gateway)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

447

A1700 (Marcom Gateway)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

448

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_F1 Grid frequency phase 1

M_AC_F2 Grid frequency phase 2

M_AC_F3 Grid frequency phase 3

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

A1700 (Marcom Gateway)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

449

A1700 / A1140 (KoCos ME27.1)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 31

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 7N1, 7E1, 7O1, 7N2, 7E2, 7O2, 8N1, 8E1, 8O1, 8N2, 8E2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

450

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

A1700 / A1140 (KoCos ME27.1)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

451

ALPHA A18xxBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 7N1, 7E1, 7O1, 7N2, 7E2, 7O2, 8N1, 8E1, 8O1, 8N2, 8E2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.02 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

452

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ALPHA A1800 ALPHA A1882

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

453

PowerCom2

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

454

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F1 Grid frequency phase 1

M_AC_F2 Grid frequency phase 2

M_AC_F3 Grid frequency phase 3

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

A1140 A1700

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

455

EMH

LZQJ (Marcom Gateway)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_P Power AC

M_AC_Q Reactive power

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

LZQJ (Marcom Gateway)

456

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

457

Fanox

SIA-B/C series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SIAB SIAC

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

458

Frer

C96...L

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.015 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

C96...L

459

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

460

QUBO 96HBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 44

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.15 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

461

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

QUBO 96H

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

462

GE Multilin

PQMII Power Quality MeterBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 39

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

463

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PQMII Power Quality Meter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

464

Hager

ECR/ECABeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1, 8E2, 8N2, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

465

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ECA series

ECA300C ECA301C ECA380D

ECA381D

ECR series

ECR300C ECR301C ECR380D

ECR381D

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

466

HAKARU PLUS CORP

XM2-110-5Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1, 8O1, 8E2, 8N2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_F Grid frequency

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

M_AC_U_N Zero phase voltage

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

XM2-110-5

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

467

Horstmann

ComPass B series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 70

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

468

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ComPass B series

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

469

Huawei

SmartLogger 2000/3000 Power Meter

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 0

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SmartLogger 2000/3000 Power Meter

470

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

471

IntelliHub

Modbus DuoBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

472

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

Please note the values "Reactive Energy total" and "Apparent Energy total" are only available for IntelliHub devices with

firmware ≥ 2.20

SUPPORTED DEVICES

EDMI series

Mk7A Mk7C Mk10A

Mk10D Mk10E Mk10H

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

473

ISKRA

ISKRA (Marcom Gateway)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

474

SUPPORTED DEVICES

ISKRA (Marcom Gateway)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

475

MC330Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N2, 8E2, 8O2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Two different Modbus value mappings can get selected via Modbus register 40100 of the "Iskra MC330" communication

protocol. Please note that the driver only supports the value mapping "MC7X0". The value mapping "MI71X0" does not get

supported.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

476

MEASUREMENT VALUES RECORDED

M_AC_F Grid frequency

M_AC_I Current AC

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MC330

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

477

Iskraemeco

MT880Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 62

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1, 8N2, 8E2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note in case the Modbus address was not set manually it is made up as follows: 100 + the last two digits of the serial

number of the connected meter. It is not possible to connect two meters with identical Modbus addresses.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

478

MEASUREMENT VALUES RECORDED

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MT880

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

479

Itron/Actaris

SL7000 (Elsist Gateway)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SL7000 (Elsist Gateway)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

480

SL7000 (Marcom Gateway)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SL7000 (Marcom Gateway)

481

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

482

Janitza

UMG 503Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 115200 bps

Frame settings: 8N2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

483

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F1 Grid frequency phase 1

M_AC_F2 Grid frequency phase 2

M_AC_F3 Grid frequency phase 3

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

UMG 503

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

484

UMG series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 115200 bps

Frame settings: 8N1, 8N2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

485

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

UMG series

UMG 96-S2 UMG 96PA UMG 96PA-MID

UMG 96PA-MID+ UMG 96RM UMG 96RM / -CBM / -P

UMG 96RM-E UMG 96RM-EL UMG 96RM-PN

UMG 103 CBM UMG 104 UMG 508

UMG 509 UMG 511 UMG 512

UMG 604 UMG 605

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

486

Kries-Energietechnik

Grid-Inspector IKI-50

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 19

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N2, 8O1, 8E1

Frame settings default: 8E1

Default address: 50

Timings

Timeout: 1 seconds

Delay: 0.2 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

487

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F1 Grid frequency phase 1

M_AC_F2 Grid frequency phase 2

M_AC_F3 Grid frequency phase 3

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Grid-Inspector IKI-50

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

488

Landis & Gyr

E650 (Marcom Gateway)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

You can connect up to 4 Landis & Gyr E650 meters to one Marcom gateway (e.g. 1 Marcom with 4 Landis & Gyr E650 = 4

devices).

Please note for connection a firmware of 3.128 and higher of the Marcom gateway is required.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

489

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

E650 (Marcom Gateway)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

490

Lovato

PMVF series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 1001

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 87

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 7O1, 7O2, 7E1, 7E2, 8N1, 8N2, 8O1, 8O2, 8E1, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

491

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PMVF series

PMVF20 PMVF50 PMVF51

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

492

Meter Gateway

L-Box

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: http

Port: 8080

Default address: 0

Remote Device Access: No

Timings

Timeout: none

Delay: 60 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_EV_E_EXP Consumption of charging infrastructure

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

L-Box

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

493

Metering Dynamics

SmartHub

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 5

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 6 seconds

Delay: 6 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note the last two digits of the serial number of the connected meter represent the Modbus address of the device. It is

not possible to connect two meters with identical Modbus addresses to the same RS485 bus.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

494

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SmartHub series

MK10A MK10E

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

495

Microstar

P2000

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 16

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 2 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

496

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

P2000

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

497

Mitsubishi

ME110

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 9

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8O1, 8N1, 8E2, 8O2, 8N2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1.5 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

498

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ME110 series

ME110NSR-MB ME110SR-MB ME110SSR-MB

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

499

Nader

NWK22Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 82

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 2

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

500

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

NWK22

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

501

PLUS ES

Modbus DuoBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

502

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

EDMI

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

503

Powermetric

Modbus DuoBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 93

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

504

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP Reactive energy (export)

M_AC_EQ_IMP Reactive energy (import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

EDMI

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

505

PQ Plus

UMD series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 20

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2, 7N1, 7N2, 7E1, 7E2, 7O1, 7O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only devices from firmware 3.0.8 and higher get supported.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

506

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

If you use the meter in single phase mode it's necessary to configure this in meter software. Otherwise the meter will show

also values for phase 2 and phase 3. Set in the menu "Install" - "Advanced" the option "Markierung bei Phasenausfall" to the

value "Flag+0".

SUPPORTED DEVICES

UMD 96 UMD 97 UMD 97EVU

UMD 98 UMD 701 UMD 704

UMD 705E/CBM UMD 705X UMD 707

UMD 709 UMD 710A UMD 710EVU

UMD 807 UMD 913

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

507

Regulus

uReg

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 115200 bps

Bus speed default: 115200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

508

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

uReg

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

509

SACI

AHM1Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8O1, 8E1, 8N1, 8N2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

510

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

AHM1

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

511

Satec

PM13xP/A/E/EH

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 61

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 7E1, 8N1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.005 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note that it is possible to change the data format by changing the configuration of the meter. Because 32-bit floating

point format is not supported by this driver, register 246 needs to be 0 (default value) and shouldn't be changed.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

512

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PM130 PLUS series

PM130A PM130E PM130EH

PM130P

PM135 series

PM135A PM135E PM135EH

PM135P

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

513

SBC

ALE3 / AWD3Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 14

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 5 seconds

Delay: 1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

514

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ALE3 AWD3

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

515

Schneider Electric

EM125X

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N2, 8O1, 8E1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_ES_EXP Apparent energy (exported)

M_AC_E_EXP Active energy (export)

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

516

SUPPORTED DEVICES

EM1250 EM1251

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

517

EM6400Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8E1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

518

MEASUREMENT VALUES RECORDED

M_AC_EQ_CAP_EXP Reactive energy (capacitive export)

M_AC_EQ_CAP_IMP Reactive energy (capacitive import)

M_AC_EQ_IND_EXP Reactive energy (inductive export)

M_AC_EQ_IND_IMP Reactive energy (inductive import)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

M_AC_U_N Zero phase voltage

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

EM6400

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

519

iEM3155 / iEM3255 / iEM3355 / iEM3555

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only devices from firmware 1.0.800 and higher get supported.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

520

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

iEM series

iEM3155 iEM3255 iEM3355

iEM3555

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

521

ION7X00/8X00 series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,

57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

522

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ION7500 ION7600 ION8300

ION8400 ION8500 ION8600

ION8650 ION8800

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

523

ION7x5x series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,

57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

524

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ION7550 ION7650

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

525

ION73X0 series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,

57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

526

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ION7300 ION7330 ION7350

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

527

ION7400

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 98

Protocol: ModbusRTU

Bus speed: 300 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,

57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

528

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ION7400

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

529

MiCOM P125, P126 & P127Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 82

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1, 8N2, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

530

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MiCOM P125, P126 & P127

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

531

PM2XX/PM7XXBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8O1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

532

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_ES_EXP Apparent energy (exported)

M_AC_E_EXP Active energy (export)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

This meter delivers cos φ and active and reactive power as values without a sign (+/-).

SUPPORTED DEVICES

PM2XX series

PM200 PM200P PM210

PM7XX series

PM700 PM700P PM710

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

533

PM2xx0 seriesBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

534

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PM21xx series series

PM2120 PM2130

PM22xx series series

PM2220 PM2230

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

535

PM51xx/PM53xx/PM55xx

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 80

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

536

MEASUREMENT VALUES RECORDED

M_AC_EQ_EXP_T1 Reactive energy tarif 1 (export)

M_AC_EQ_EXP_T2 Reactive energy tarif 2 (export)

M_AC_EQ_EXP_T3 Reactive energy tarif 3 (export)

M_AC_EQ_EXP_T4 Reactive energy tarif 4 (export)

M_AC_EQ_IMP_T1 Reactive energy tarif 1 (import)

M_AC_EQ_IMP_T2 Reactive energy tarif 2 (import)

M_AC_EQ_IMP_T3 Reactive energy tarif 3 (import)

M_AC_EQ_IMP_T4 Reactive energy tarif 4 (import)

M_AC_EQ_TOTAL Reactive Energy total

M_AC_ES_EXP_T1 Apparent energy tarif 1 (export)

M_AC_ES_EXP_T2 Apparent energy tarif 2 (export)

M_AC_ES_EXP_T3 Apparent energy tarif 3 (export)

M_AC_ES_EXP_T4 Apparent energy tarif 4 (export)

M_AC_ES_IMP_T1 Apparent energy tarif 1 (import)

M_AC_ES_IMP_T2 Apparent energy tarif 2 (import)

M_AC_ES_IMP_T3 Apparent energy tarif 3 (import)

M_AC_ES_IMP_T4 Apparent energy tarif 4 (import)

M_AC_E_EXP Active energy (export)

M_AC_E_EXP_T1 Active energy for Tariff 1 (export)

M_AC_E_EXP_T2 Active energy for Tariff 2 (export)

M_AC_E_EXP_T3 Active energy for Tariff 3 (export)

M_AC_E_EXP_T4 Active energy for Tariff 4 (export)

M_AC_E_IMP Active energy (import)

M_AC_E_IMP_T1 Active energy for Tariff 1 (import)

M_AC_E_IMP_T2 Active energy for Tariff 2 (import)

M_AC_E_IMP_T3 Active power for tariff 3 (import)

M_AC_E_IMP_T4 Active power for tariff 4 (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

537

SUPPORTED DEVICES

PM5000 series

PM5100 PM5110 PM5111

PM5310 PM5320 PM5330

PM5331 PM5340 PM5341

PM5560 PM5561

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

538

PM325x

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only devices from firmware 1.0.800 and higher get supported.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

539

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PM3200 series

PM3250 PM3255

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

540

PM800 series

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 22

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.5 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

541

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PM800 series

PM810 PM820 PM850

PM870

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

542

PM8240Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 115200 bps

Frame settings: 8N1, 8O1, 8E1, 8N2, 8O2, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

543

MEASUREMENT VALUES RECORDED

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PM8240

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

544

Sepam S40 series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1, 8O1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: No

The use of protection devices for the purpose of measurement with regard to active and reactive power control is generally

not recommended as protection transformers do not provide sufficient accuracy for many applications compared to instrument

transformers.

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

545

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sepam 40 series

G40 M40 M41

S40 S41 S42

S43 S44 S48 - E11

S48 - E12 S48 - E13 S48 - E14

S48 - E15 S48 - E22 S48 - E23

S48 - E32 S48 - E33 S50

S51 S52 S53

S54 T40 T42

T50 T52

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

546

SEL

SEL-735

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 95

Protocol: ModbusRTU

Bus speed: 300 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,

57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 6E1, 6N1, 6O1, 6E2, 6N2, 6O2, 7E1, 7N1, 7O1, 7E2, 7N2, 7O2, 8E1, 8N1, 8O1, 8E2,

8N2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

It is necessary to configure the scaling settings in the device for correct communication and measurement. The scaling

settings have to be configured with the software "ACSELERATOR QuickSet SEL-5030" in the menu "Identifier and Scaling

Settings". The scaling settings have to be set to VOLT_SCA = UNITY, POWR_SCA = UNITY, ENRG_SCA = KILO.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: No

547

MEASUREMENT VALUES RECORDED

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SEL-735

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

548

Siemens

7SR10 ArgusBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8O1, 8E1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

549

MEASUREMENT VALUES RECORDED

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

7SR10 Argus

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

550

PAC

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 126

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N2, 8E1, 8O1, 8N1

Frame settings default: 8N2

Default address: 126

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Configuration of device for active energy counting range needs to be set to "IMPORT" or "EXPORT". Range "BALANCE"

does not get supported.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

551

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PAC series

PAC2200 PAC3100 PAC3200

PAC3220 PAC4200

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

552

SunSpec Alliance

Compatible meter

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 98

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 201 Model 202 Model 203

Model 204

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Compatible meter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

553

Takemoto Denki

XM2-110

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1, 8O1, 8E2, 8N2, 8O2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

The driver supports the address range 1 to 247. The address 0 does not get supported.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

M_AC_EQ_CAP_EXP Reactive energy (capacitive export)

M_AC_EQ_CAP_IMP Reactive energy (capacitive import)

M_AC_EQ_IND_EXP Reactive energy (inductive export)

M_AC_EQ_IND_IMP Reactive energy (inductive import)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

554

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

XM2-110

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

555

Thytronic

PRON NV10P-MB0Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_F1 Grid frequency phase 1

M_AC_F2 Grid frequency phase 2

M_AC_F3 Grid frequency phase 3

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PRON NV10P-MB0

556

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

557

Vendor-neutral

S0 energy meter

COMMUNICATION

Communication interface: Digital Input (DI), Multi Input (MI)

Timings

Timeout: 2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

E_INT Energy generated per interval

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

S0 energy meter

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

558

Veris Industries

E51C2

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 98

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 201 Model 202 Model 203

Model 204

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

E51C2

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

559

WEG

MMW03-M22CH

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 38400 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

560

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP_T1 Active energy for Tariff 1 (export)

M_AC_E_EXP_T2 Active energy for Tariff 2 (export)

M_AC_E_IMP_T1 Active energy for Tariff 1 (import)

M_AC_E_IMP_T2 Active energy for Tariff 2 (import)

M_AC_F Grid frequency

M_AC_I Current AC

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_I_N Current, neutral conductor

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_P_DEMAND Active Power Demand

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_Q_DEMAND Reactive Power Demand

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_S_DEMAND Apparent Power Demand

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MMW03-M22CH

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

561

Woodward

MFR 300

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.01 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Only devices with firmware 1.02 get supported.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: Yes

The use of protection devices for the purpose of measurement with regard to active and reactive power control is generally

not recommended as protection transformers do not provide sufficient accuracy for many applications compared to instrument

transformers.

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

562

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MFR 300 series

MFR 300-11M MFR 300-15M MFR 300-71M

MFR 300-75M

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

563

MRA4 / MCA4

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 45

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 8O1, 8O2

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.01 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note, since release 3.6 Woodward offers the tool "SCADApter" with which project specific data point lists can get

created. The driver does not support any project/device specific data point lists.

POWER CONTROL

For use of Power Control: Yes

For use of control criterion phase-related: No

The use of protection devices for the purpose of measurement with regard to active and reactive power control is generally

not recommended as protection transformers do not provide sufficient accuracy for many applications compared to instrument

transformers.

Compliance with Grid Code specific requirements using this measuring instrument cannot be guaranteed in general, but has

to be checked on a project-specific basis.

ALARM MONITORING

Alarm monitoring: Yes

The alarms "I[1] - 50, 51" to "I[6] - 50, 51" can get configured via Woodward configuration tool. The interpretation of the

alarms sent by the blue’Log depends on the initial configuration of the device.

564

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MCA4 MCDGV4 MCDTV4

MRA4 MRDT4 MRI4

MRM4 MRMV4 MRU4

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

565

Yokogawa

PR300

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 99

Protocol: ModbusRTU

Bus speed: 2400 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8O1, 8E1, 8N2, 8O2, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

POWER CONTROL

For use of Power Control: No

For use of control criterion phase-related: No

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

566

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PR300

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

567

String monitoringABB

ABB PVI-STRINGCOMB (Aurora protocol)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 31

Protocol: AURORA

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 0.5 seconds

Delay: 0.035 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ABB PVI-STRINGCOMB (Aurora protocol)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

568

Ultra Solar Field GatheringBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 2

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

STATE (1,...x) Status (1,...x)

T Temperature

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ULTRA series

3G90 3L11 V11

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

569

AROS (Riello)

String Box

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

String Box

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

570

Astrid Energy Enterprises

Array MonitorBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 76

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8E2, 8N1, 8N2, 8O1, 8O2, 7E1, 7E2, 7N1, 7N2, 7O1, 7O2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

STATE (1,...x) Status (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Array Monitor

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

571

Carlo Gavazzi

VMU

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

VMU-M VMU-S VMU-S30

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

572

Chint

CPS CB10

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8O1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CPS CB10

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

573

Circutor

STMBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

STATE (1,...x) Status (1,...x)

T Temperature

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

STM

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

574

TR8

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Driver supports 'single slave' devices only, the modus 'Slave-Subslave' is not supported. For this reason, the maximum of

these stringboxes on a single bus is limited to 32.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

TR8

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

575

TR16Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

TR16

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

576

Fronius

Fronius SolarNet String ControlBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS422

Max. number of devices per bus: 100

Protocol: SOLAR_NET

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 57600 bps

Frame settings: 8N1, 8N2, 8E1, 8E2, 7N1, 7N2, 7E1, 7E2

Frame settings default: 8N1

Default address: 0

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

To communicate with the inverter via SolarNet protocol a Full duplex (4 Wires) cabling via RS422 is necessary. It is possible

to use both the two RS485 interfaces of the blue'Log XM / XC base module and the MX-MODULE RS485/422. On the blue'Log

base module the four inputs (starting from left) of each RS485 interface can get used for connections via RS422 SolarNet

protocol.

For cablings via RS422 via RS485 base module interfaces (Inputs from left to right) Rx+ ; Rx- ; Tx+ ; Tx- ; GND

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Fronius SolarNet String Control

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

577

Gantner

string.bloxx 1xx EM 1500V

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 44

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 5 seconds

Delay: 0.5 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

string.bloxx 116 EM 1500V series

string.bloxx 116 EM 1500V

string.bloxx 124 EM 1500V series

string.bloxx 124 EM 1500V

Please note the string.bloxx 116 EM with 32 string inputs consists of two 16 string input versions. For a correct scan the two

devices need to be scanned separately (1 x string.bloxx 116 EM with 32 string inputs = 2 devices each with its own bus

address).

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

578

Ingeteam

DC Current Measurement HW

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 2

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1

Frame settings default: 8N1

Default address: 2

Timings

Timeout: 2 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

DC Current Measurement HW

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

579

KACO new energy

blueplanet Argus (SunSpec)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 11

Remote Device Access: Yes

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 38400 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 401 Model 402 Model 403

Model 404

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

blueplanet Argus series

blueplanet Argus 16 Mon blueplanet Argus 20 Mon blueplanet Argus 24 Mon

blueplanet Argus L-20 blueplanet Argus L-24 blueplanet Argus XL-20

blueplanet Argus XL-24

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

580

Powador Argus 16/24S DCS

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 99

Protocol: KACO

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.03 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Powador Argus series

Powador Argus 16S DCS Powador Argus 24S DCS

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

581

Kernel sistemi

ST0NxxxxBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note connection of ST0Nxxxx via Modbus TCP only possible in combination with additional equipment. Please check

with "Kernel sistemi". By default only possible connection via RS485 (Modbus RTU).

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ST0 Series series

ST0 2415 ST0N 0825 ST0N 1225

ST0N 1625 ST0N 2025

ST0N Series series

ST0N 2415 ST0N 3215

582

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

583

ST1NxxxxBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ST1N Series series

ST1N 0840 ST1N 1240 ST1N 1635

ST1N 2435

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

584

ST1xxxx

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ST1 Series series

ST1 0630 ST1 0830 ST1 1030

ST1 1430 ST1 1630 ST1 2422

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

585

Klein

KSM-VX.X

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

KSM-V0.7 KSM-V0.8

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

586

meteocontrol

i´catcher

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 44

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 5 seconds

Delay: 0.5 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

i´catcher series

i´catcher 8-1B i´catcher 16-1B i´catcher 24-1B

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

587

String Monitoring Unit (Kernel Sistemi ST2xxxx)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8O1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SMU 0825 SMU 1225 SMU 1625

SMU 2422

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

588

Monsol

1000|1500V Shunt

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

T Temperature

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

1000|1500V Shunt

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

589

Noark

SUP 4S-20SBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 17

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.5 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

P_DC Power DC

STATE (1,...x) Status (1,...x)

T Temperature

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SUP 4S-20S

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

590

Phoenix Contact

Solarcheck

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8N2, 8O1, 8O2, 8E1, 8E2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

In order to measure voltage of the "voltage measuring module", it must be connected to the 8S module in the first channel.

Connection of the "voltage measuring module" to the 4S module not possible.

Depending on the amount of modules connected the total amount of devices varies that can be connected to one blue’Log (e.g.

8 x 8S modules = 8 devices for the blue’Log).

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

Values for "Status" and "Temperature" will just be available for the first module if modules (4S, 8S) get connected to the first

channel.

SUPPORTED DEVICES

SCK-C-MODBUS SCK-M-I-4S-20A SCK-M-I-8S-20A

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

591

Power Electronics

HE/HEC/HES Disconnecting UnitBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

HE/HEC/HES Disconnecting Unit

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

592

HE/HEC/HES String Supervisor 8/32

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 5 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note max. 4 String Supervisor can get connected to each Power Electronics "Solar Inverter". To avoid that String

Supervisors are created multiple times it is recommended to only scan the first "Solar Inverter" of each Power Electronics

inverter as String Supervisors of other "Solar Inverter" will get detected automatically during the scan.

The virtual address of each String Supervisor assigned during scanning on the blue'Log does not match the String

Supervisor ID (SSx ID).

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

String Supervisor series

String Supervisor 8 String Supervisor 32

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

593

Raycap

ProSMS

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps

Bus speed default: 38400 bps

Frame settings: 8E1, 8O1, 8N2

Frame settings default: 8E1

Default address: 5

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

T Temperature

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ProSMS8-WM

ProSMS series

ProSMS 8 ProSMS 1500

When connecting the ProSMS 8-WM via the ProSMS-G it is neccessary to select Parity "ODD" on blue'Log XM / XC for a

succcessful scan.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

594

Renovagy

PV5690 String Monitoring System

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PV5690 String Monitoring System

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

595

PV5790 String Monitoring SystemBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PV5790 String Monitoring System

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

596

Santerno

Smart String BoxBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 38400 bps

Frame settings: 8N1, 8N2, 8E1, 8O1

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.005 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note:

-The "SSB CS-SP 16 600V" consits of 2 x "SSB CS-SP 8 600V" (1 x SSB CS-SP 16 600V = 2 devices)

-The "SSB CS-SP 24 600V" consist of 3 x "SSB CS-SP 8 600V" (1 x SSB CS-SP 24 600V = 3 devices)

For a correct scan the devices need to be scanned separately (1 x SSB CS-SP 16 600V = 2 devices each with its own bus

address).

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Smart String Box series

Santerno SSB CS-SP 8 600V Santerno SSB CS-SP 16 600V Santerno SSB CS-SP 24 600V

597

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

598

Sunway TG ES1008

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 38400 bps

Frame settings: 8N1, 8N2, 8E1, 8O1

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.005 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

T Temperature

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunway TG ES1008

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

599

SENECA

Z-4AI SCB (0 to 025A)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 38400 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Z-4AI SCB (0 to 025A)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

600

Z-8AI SCB (0 to 025A)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 38400 bps

Frame settings: 8N1, 8E1, 8O1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Z-8AI SCB (0 to 025A)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

601

SIEL

CSP12Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T Temperature

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CSP12

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

602

SMA

String-Monitor (SSM-U)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 120

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note only Client / Slave IDs from 120-169 are supported by SMA.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SMA String-Monitor series

SSM-U-1610 SSM-U-1615 SSM-U-2410

SSM-U-2415 SSM-U-3210 SSM-U-3215

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

603

Sunny Central (1760-4600) Zone Monitoring

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 32

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note only Client / Slave IDs 32 and 33 are supported by SMA.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunny Central (1760-4600) Zone Monitoring

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

604

Sunny Central (CP, CP-US, CP-JP, HE-20) String MonitorBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 4

Remote Device Access: No

Timings

Timeout: 5 seconds

Delay: 0.25 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note only Client / Slave IDs from 4-247 are supported by SMA.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunny Central (CP, CP-US, CP-JP, HE-20) String Monitor

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

605

Sunny Central (CP, CP-US, CP-JP, HE-20) Zone Monitoring

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 4

Remote Device Access: No

Timings

Timeout: 5 seconds

Delay: 0.25 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note only Client / Slave IDs from 4-247 are supported by SMA.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunny Central (CP, CP-US, CP-JP, HE-20) Zone Monitoring

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

606

Socomec

SUNSYS IFB/FJBBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

T (1,...x) Temperature (1,...x)

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

IFB/ FJB 8 IFB/ FJB 12 IFB/ FJB 16

IFB/ FJB 24 IFB/ FJB 32

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

607

SolarMax

MaxConnect PLUS (MaxComm Protocol)

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: MAX_COMM_SERIAL

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 3 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

MaxConnect PLUS series

MaxConnect 12 PLUS MaxConnect 16 PLUS

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

608

Spelsberg

PV Monitoring SystemBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8E1, 8N1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

I (1,...x) Current DC (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

PV Monitoring System

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

609

SunSpec Alliance

Compatible string monitoring

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

Model 401 Model 402 Model 403

Model 404

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Compatible string monitoring

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

610

TMEIC

SGV

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SGV

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

611

Weidmüller

Transclinic xi+

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps, 19200 bps

Bus speed default: 19200 bps

Frame settings: 8E1, 8N1

Frame settings default: 8E1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

I (1,...x) Current DC (1,...x)

T Temperature

U_DC Voltage DC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Transclinic 8i+ Transclinic 14i+ Transclinic 16i+

Transclinic 16i+ 1k5 H Transclinic 16i+ 1k5 L

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

612

Status DI externalABB

RIO600 - DIM8Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RIO600 - DIM8

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

613

CRD

CRD600A

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note that the CRD600A does not support Modbus TCP by default. Connection via Ethernet just possible by using an

additional RS485/Ethernet converter. Please get in touch with meteocontrol Sales for clarification regarding Ethernet

connection.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

CRD600A

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

614

EXPERT

EX9053DM

COMMUNICATION

Communication interface: RS485

Max. number of devices per bus: 46

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps,

115200 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: 0.5 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

EX9053DM

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

615

Huawei

SmartLogger 2000 DI Status

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 0

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SmartLogger 2000 DI Status

Please note the driver does not work in combination with SmartLogger1000.

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

616

Santerno

Sunway TG Remote I/O

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps

Bus speed default: 38400 bps

Frame settings: 8N2

Frame settings default: 8N2

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Sunway TG Remote I/O

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

617

SMA

ioLogik E1210-TBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.1 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ioLogik E1210-T

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

618

WAGO

I/O Systems series 750, 750XTR, 753, 767

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,

38400 bps, 57600 bps, 115200 bps

Bus speed default: 19200 bps

Frame settings: 8N1, 8E1, 8O1, 8N2, 7N2

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

On a 8 channel digital input module the number of the digital input doesn't match to the number of the connection pin. Please

consider this when configuring the device in the blue'Log. Please check the manufacturer manual.

Example:

First module next to the communication module: DI1 = Pin 1, DI2 = Pin 5, DI3 = Pin 2, DI4 = Pin 6, DI5 = Pin 3, DI6 = Pin 7, DI7

= Pin 4, DI8 = Pin 8

Second module next to the communication module: DI9 = Pin 1, DI10 = Pin 5, DI11 = Pin 2, DI12 = Pin 6, DI13 = Pin 3, DI14 =

Pin 7, DI15 = Pin 4, DI16 = Pin 8)

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

I/O-System 750 series

I/O-System 750

619

Speedway 767 series

Speedway 767

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

620

Weidmüller

UR20-FBC-MOD-TCP-V2Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

The driver supports a maximum amount of 64 connected I/O modules (e.g. UR20-16DI-P / UR20-4AI-RTD-DIAG)

Depending on the amount of I/O modules connected the total amount of devices varies that can be connected to one blue’Log

(e.g. 3 x UR20-16DI-P = 3 devices).

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

Values for "Status" and "Error" are just available for the first I/O module connected to the UR20-FBC-MOD-TCP-V2.

SUPPORTED DEVICES

UR20-4AI-RTD-DIAG UR20-16DI-P

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

621

TrackerAlionEnergy

Storm Tracker

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

Please note the driver only supports the following Modbus mappings : rev_D, rev_E, rev_G, rev_I

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

SRAD Irradiance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Storm Tracker

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

622

Arctech Solar

Sky Smart System

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 200

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 200

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

Communication via Modbus TCP only possible in combination with additional equipment. For communication via Modbus

TCP please get in touch with "Arctech Solar".

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

AZIMUTH Azimuth

AZIMUTH_TARGET Azimuth, target value

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_W_S1 Wind speed 1

E_W_S2 Wind speed 2

SRAD1 Irradiance 1

SRAD2 Irradiance 2

SRAD3 Irradiance 3

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

623

SUPPORTED DEVICES

Sky Smart System Sky Smart System II

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

624

Array Technologies

Dura Track Hz

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Dura Track Hz

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

625

Braux

SL series

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

Please note the driver only supports the following Modbus mappings : rev_D, rev_E, rev_G, rev_I

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

SRAD Irradiance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SL series

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

626

Convert

TRJ-AIBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

SRAD Irradiance

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

TRJ-AI

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

627

FTC Solar

VoyagerBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ERROR (1,...x) Error (1,...x)

E_RF_ABS1 Precipitation quantity, absolute

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

SRAD Irradiance

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Voyager

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

628

GameChange Solar

Genius TrackerBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

E_W_S1 Wind speed 1

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Genius Tracker

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

629

Ideematec

safe Track Trackersystem

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 255

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

One Ideematec Tracker controller consists of up to 120 Tracker and 1 Sensor box (121 devices).

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_W_D1 Wind direction 1

E_W_D2 Wind direction 2

E_W_S1 Wind speed 1

E_W_S2 Wind speed 2

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

safe Track Trackersystem

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

630

NCLAVE

Solar tracker SP1000

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ERROR (1,...x) Error (1,...x)

E_W_S Wind speed

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Solar tracker SP1000

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

631

SP160Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SP160

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

632

NEXTracker

NX HorizonBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

It is possible to connect a combination of up to 100 SPCs (Self-Powered Controller) and Weather Stations to a single NCU

(Network Control Unit).

Depending on the amount of SPCs and Weather Stations connected to the NCU the total amount of devices varies that can be

connected to one blue’Log (e.g. 99 SPCs + 1 Weather Station = 100 devices).

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

E_W_S Wind speed

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

NX Horizon

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

633

Powerway

Tracker Control BoxBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 9600 bps

Bus speed default: 9600 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

AZIMUTH Azimuth

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Tracker Control Box

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

634

PVHardware

Axone DuoBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.05 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_W_D Wind direction

E_W_S Wind speed

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Axone Duo

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

635

Solar FlexRack

Turnkey Solar Tracker

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

Please note the driver only supports the following Modbus mappings : rev_D, rev_E, rev_G, rev_I

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

SRAD Irradiance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Turnkey Solar Tracker

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

636

Soltec

SF Tracker

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

For a successful scan the angle of the trackers must not be zero degrees. If the angle will be zero degrees the scan will fail.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

SF Tracker

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

637

Soltigua

iTracker

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

Please note that max. 250 trackers can get connected to a single blue’Log with activated tracker mode even if it is possible to

connect up to 1000 devices to one Soltigua iTracker Control Panel.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ERROR (1,...x) Error (1,...x)

E_W_S Wind speed

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

iTracker

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

638

SunTrack

Network Control Unit

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

Please note the driver only supports the following Modbus mappings : rev_D, rev_E, rev_G, rev_I

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

SRAD Irradiance

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Network Control Unit

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

639

TerraTrak

Trak

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

By activating the "tracker mode" on blue'Log XM it is possible to extend the max. amount of devices which can get connected

to a single blue'Log XM to 250. Once tracker mode got activated only device types: Tracker, Sensor and Status can be

configured. Please check with the vendor of the tracker system how many tracker max. can get connected for each tracker

solution.

The TerraTrak system can consist of several Unit-IDs by looking at the Modbus mapping. For each Unit-ID the maximum

amount of 100 trackers and 2 weather stations can get connected. Please make sure not to exceed the limit of 250 trackers

which can max. get connected to a single blue'Log.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ELEVATION Elevation

ELEVATION_TARGET Elevation, target value

ERROR (1,...x) Error (1,...x)

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

E_W_S_MA (1,...x) Maximum wind speed

STATE (1,...x) Status (1,...x)

T Temperature

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Trak

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

640

BatteryADS-TEC

StoraXe Master

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

B_CHARGE_LEVEL Charging status

B_E_EXP Energy from storage system

B_E_IMP Energy to storage system

B_I_DC Battery current

B_P_DC Battery power

B_U_DC Battery voltage

ERROR (1,...x) Error (1,...x)

STATE (1,...x) Status (1,...x)

T (1,...x) Temperature (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

StoraXe Master

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

641

Delta

RT-10KBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 100

Protocol: ModbusRTU

Bus speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps

Bus speed default: 9600 bps

Frame settings: 8N1, 8O1, 8E1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

To enable communication via Modbus RTU the "Switches" of the RT-10K need to be set to:

- set SW1 to > 0

- set SW3 to "MODBUS Protocol"

- set SW4 to "RS485"

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

B_CHARGE_LEVEL Charging status

B_P_DC Battery power

B_U_DC Battery voltage

ERROR (1,...x) Error (1,...x)

STATE (1,...x) Status (1,...x)

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

RT-10K

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

642

Tesla

Energy Storage SystemBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Please note in case a battery meter should be connected to the Tesla system the blue’Log will automatically create an

additional meter device besides the battery on the blue’Log during the scan.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

B_CHARGE_LEVEL Charging status

B_STP_P Active power setpoint

ERROR (1,...x) Error (1,...x)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I Current AC

M_AC_P Power AC

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_Q Reactive power

M_AC_S Apparent power

M_AC_U Voltage AC

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

Energy Storage System

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

643

GensetDeep Sea Electronics

7310MkIIBeta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Communication interface: RS485

Max. number of devices per bus: 64

Protocol: ModbusRTU

Bus speed: 19200 bps

Bus speed default: 19200 bps

Frame settings: 8N1

Frame settings default: 8N1

Default address: 1

Timings

Timeout: 1 seconds

Delay: none

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

ALARM MONITORING

Alarm monitoring: Yes

644

MEASUREMENT VALUES RECORDED

COS_PHI Power factor (cos phi)

COS_PHI1 Power factor (cos phi) phase 1

COS_PHI2 Power factor (cos phi) phase 2

COS_PHI3 Power factor (cos phi) phase 3

D_IN (1,...x) Digital input (1,...x)

ERROR (1,...x) Error (1,...x)

FUEL_CONSUMPTION Fuel consumption

FUEL_EFFICIENCY Fuel efficiency

FUEL_REMAINING Fuel remaining

F_AC Grid frequency

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

P_AC1 Power AC phase 1

P_AC2 Power AC phase 2

P_AC3 Power AC phase 3

Q_AC Reactive power

Q_AC1 Reactive power phase 1

Q_AC2 Reactive power phase 2

Q_AC3 Reactive power phase 3

STATE (1,...x) Status (1,...x)

S_AC Apparent power

S_AC1 Apparent power phase 1

S_AC2 Apparent power phase 2

S_AC3 Apparent power phase 3

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

7310MkII

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

645

DEIF

ASC Genset (with AGC)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.02 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Depending on the amount of gensets connected to the DEIF Controller the total amount of devices varies that can be

connected to one blue’Log (e.g. 1 x DEIF ASC = up to 16 devices).

The gensets must be equipped with DEIF AGC controllers connected to the ASC on the DEIF internal Power Management

communication line.

ALARM MONITORING

Alarm monitoring: Yes

MEASUREMENT VALUES RECORDED

ERROR (1,...x) Error (1,...x)

FUEL_CONSUMPTION Fuel consumption

FUEL_EFFICIENCY Fuel efficiency

FUEL_REMAINING Fuel remaining

OT_TOTAL Operation hours

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

Q_AC Reactive power

Q_AC_SET_ABS Absolute reactive power setpoint

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ASC Genset (with AGC)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

646

ASC Genset (without AGC)Beta version (see chapter „Beta version“)

COMMUNICATION

Communication interface: Ethernet

Max. number of devices: 100

Protocol: ModbusTCP

Port: 502

Default address: 1

Remote Device Access: No

Timings

Timeout: 1 seconds

Delay: 0.02 seconds

The maximum number of devices per bus is a recommendation for the affected driver for the visualization of 1-minute values.

Please consider the software features of your blue’Log base module. Please refer to the blue’Log data sheet.

Depending on the amount of gensets connected to the DEIF Controller the total amount of devices varies that can be

connected to one blue’Log (e.g. 1 x DEIF ASC = up to 16 devices).

If the ASC receives data not from the DEIF AGC controllers but from meters connected to the ASC then it's necessary to use

this driver.

ALARM MONITORING

Alarm monitoring: No

MEASUREMENT VALUES RECORDED

D_IN (1,...x) Digital input (1,...x)

P_AC Power AC

P_AC_SET_ABS Absolute active power setpoint

P_AC_SET_REL Relative active power setpoint

Q_AC Reactive power

Q_AC_SET_ABS Absolute reactive power setpoint

The actually recorded values may vary due to the device model or the device firmware.

SUPPORTED DEVICES

ASC Genset (without AGC)

Please contact Sales for details of compatibility with devices not listed.

Phone: +49 (0)821 34666 - 80

E-mail: sales@meteocontrol.com

647

AppendixSunSpec measurement valuesThe following list of measurement values shows the maximum set of values which are available for each device category and SunSpec

models. Depending on the manufacturer of the device the available values vary.

InverterSUNSPEC MODELS 101, 102, 103

COS_PHI Power factor (cos phi)

ERROR (1,...x) Error (1,...x)

E_TOTAL Energy total

F_AC Grid frequency

I_AC Current AC

I_AC1 Current AC phase 1

I_AC2 Current AC phase 2

I_AC3 Current AC phase 3

I_DC Current DC total

P_AC Power AC

P_DC Power DC

Q_AC Reactive power

STATE (1,...x) Status (1,...x)

S_AC Apparent power

T (1,...x) Temperature (1,...x)

U_AC1 Voltage AC phase 1

U_AC2 Voltage AC phase 2

U_AC3 Voltage AC phase 3

U_AC_L1L2 Phase voltage L1L2

U_AC_L2L3 Phase voltage L2L3

U_AC_L3L1 Phase voltage L3L1

U_DC Voltage DC

SUNSPEC MODELS 122

E_TOTAL Energy total

R_ISO Insulation resistance

SUNSPEC MODELS 123

No measurements recorded

SUNSPEC MODELS 160

ERROR (1,...x) Error (1,...x)

I_DC Current DC total

P_DC Power DC

U_DC Voltage DC

SensorSUNSPEC MODELS 302

SRAD1 Irradiance 1

SRAD2 Irradiance 2

SRAD3 Irradiance 3

SRAD4 Irradiance 4

SRAD5 Irradiance 5

648

SUNSPEC MODELS 303

T Temperature

SUNSPEC MODELS 305

E_ALT1 Altitude

SUNSPEC MODELS 307

E_AH_REL1 Humidity, relative

E_AP_ABS1 Air pressure, absolute

E_PRECIPITATION Precipitation type

E_RF_ABS1 Precipitation quantity, absolute

E_SNOW_DEPTH Snow depth

E_W_D Wind direction

E_W_S Wind speed

T Temperature

SUNSPEC MODELS 308

E_W_S Wind speed

SRAD Irradiance

T (1,...x) Temperature (1,...x)

649

MeterSUNSPEC MODELS 201, 202, 203, 204

ERROR (1,...x) Error (1,...x)

M_AC_ES_EXP Apparent energy (exported)

M_AC_ES_IMP Apparent energy (imported)

M_AC_E_EXP Active energy (export)

M_AC_E_IMP Active energy (import)

M_AC_F Grid frequency

M_AC_I Current AC

M_AC_I1 Current AC phase 1

M_AC_I2 Current AC phase 2

M_AC_I3 Current AC phase 3

M_AC_P Power AC

M_AC_P1 Power AC phase 1

M_AC_P2 Power AC phase 2

M_AC_P3 Power AC phase 3

M_AC_PF_COSPHI Power factor (cos phi)

M_AC_PF_COSPHI1 Power factor (cos phi) phase 1

M_AC_PF_COSPHI2 Power factor (cos phi) phase 2

M_AC_PF_COSPHI3 Power factor (cos phi) phase 3

M_AC_Q Reactive power

M_AC_Q1 Reactive power, phase 1

M_AC_Q2 Reactive power, phase 2

M_AC_Q3 Reactive power, phase 3

M_AC_S Apparent power

M_AC_S1 Apparent power phase 1

M_AC_S2 Apparent power phase 2

M_AC_S3 Apparent power phase 3

M_AC_U Voltage AC

M_AC_U1 Voltage AC phase 1

M_AC_U2 Voltage AC phase 2

M_AC_U3 Voltage AC phase 3

M_AC_U_L1L2 Phase voltage L1L2

M_AC_U_L2L3 Phase voltage L2L3

M_AC_U_L3L1 Phase voltage L3L1

String monitoringSUNSPEC MODELS 401, 402, 403, 404

ERROR (1,...x) Error (1,...x)

I (1,...x) Current DC (1,...x)

I_SUM Sum of DC currents

P_DC Power DC

T Temperature

U_DC Voltage DC

650

651

652