Please read these instructions carefully and retain for future reference.

Compact Ceramic Oscillating Heater1800W oscillating heater with ceramic element

Instruction Booklet HE2105

Contents

Sunbeam’s Safety Precautions 1

Sunbeam’s Safety Precautions for your Heater 2

Sunbeam’s Total Safety System 3

Features of your Compact Oscillating Ceramic Heater 4

Using your Compact Oscillating Ceramic Heater 6

Using the Oscillation function 7

Resetting the Total Safety System 7

Troubleshooting Guide 8

Care and Cleaning 8

1

If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:

• Readcarefullyandsavealltheinstructionsprovided with an appliance.

• Alwaysturnthepoweroffatthepoweroutletbeforeyouinsertorremoveaplug.Remove by grasping the plug - do not pull on the cord.

• Turnthepoweroffandremovetheplug when the appliance is not in use and before cleaning.

• Donotuseyourappliancewithanextensioncord unless this cord has been checked and tested by a qualified technician or service person.

• Alwaysuseyourappliancefromapower outletofthevoltage(A.C.only)marked on the appliance.

• Thisapplianceisnotintendedforusebypersons(includingchildren)withreducedphysical, sensory or mental capabilities, or lackofexperienceandknowledge,unlesstheyhave been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Childrenshouldbesupervisedtoensurethatthey do not play with the appliance.

• Thetemperatureofaccessiblesurfacesmaybehigh when the appliance is operating.

• Neverleaveanapplianceunattendedwhile in use.

• Donotuseanapplianceforanypurpose other than its intended use.

• Donotplaceanapplianceonornearahotgasflame, electric element or on a heated oven.

• Donotplaceontopofanyotherappliance.• Donotletthepowercordofanappliancehang

over the edge of a table or bench top or touch any hot surface.

• Donotoperateanyelectricalappliancewitha damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest SunbeamAppointedServiceCentre forexamination,repairoradjustment.

• Foradditionalprotection,Sunbeamrecommend the use of a residual current device(RCD)withatrippingcurrentnotexceeding30mAintheelectricalcircuitsupplying power to your appliances.

• Donotimmersetheapplianceinwater or any other liquid unless recommended.

•Appliancesarenotintendedtobeoperated bymeansofanexternaltimerorseparateremote control system.

•Thisapplianceisintendedtobeusedinhousehold and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

2

If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

• Thisheaterbecomeshotduringuse.Toavoidburns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtainsatleast3feet(90cm)awayfromthefront of the heater and keep them away from the sides and rear.

• Extremecautionisnecessarywhenanyheateris used by or near children or invalids and whenever the heater is left unattended.

• Alwaysunplugtheheaterwhennotinuse.

• Donotuseoutdoors.

• Donotrunthecordoftheheaterundercarpeting.Donotcoverthecordwiththrowrugs,runnersorotherfloorcoverings.Arrangethe cord away from traffic areas where it will not be tripped over.

• Donotlocatetheheaterimmediatelybelowasocket outlet.

• Donotusethisheaterintheimmediatesurrounds of a bath, shower, laundry area or swimming pool.

• Donotinsertorallowforeignobjectstoenteranyventilationorexhaustopeningsasthismaycause electric shock or fire, or damage to the heater.

• Topreventapossiblefire,donotblockairintakesorexhaustinanymanner.Donotuseon soft surfaces, such as beds, where opening may become blocked.

• Aheaterhashotandarcingorsparingpartsinside.Donotuseitinareaswherepetrol,paint or flammable liquids are used or stored.

• Topreventoverheating,donotcovertheheater.

Important instructions – retain for future use.

3

Safety auto shut offYour Sunbeam Compact Oscillating Ceramic heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically shuts it off to prevent overheating. If the heater is gettingexcessivelyhot,analarmwillsound.

Donotoperatetheheaterwiththealarmsounding. Immediately turn the heater off at the power outlet and check that there aren't anyobjectsonoraroundtheheater.

Thisfirststageofthesafetysystemrequiresthe user to manually reset the heater for it to resume operation.

Forinstructionsonhowtoresetyourheater,see page 7.

Thermal back-up deviceIn addition to this automatic shut-off, your heater contains an over temperature thermal back-up device to provide additional back-up protection. If the heater is in an overheat situation, the back-up device will operate, stopping the power flow to the element and fan.

In the event that the back-up device is activated, the heater will need to be reset. Forinstructionsonhowtoresetyourheater,see page 7.

Instant tip over cut outTheinstanttipovercutoutinterruptsthepower to the heating element and fan if the heaterisaccidentallytippedover.Theheaterwill not resume operation until it is replaced in the upright position.

Sunbeam’s Total Safety System

Mode buttonPress the mode button to select the desired operating mode: lowhEAT,highhEAT AuTo,FANorSTANDby

Fan settingIdeal for circulating cool air in summer, the fan setting operates the fan without heat.

Power ON lightIlluminates to indicate that the heater is connected to the power outlet.

LCD screenThelCDscreendisplaysthecurrentsettingsincluding the ambient room temperature, the selected mode, or heat setting.

Safety auto shut-offThesafetyautoshut-offsystemdetectsanyabnormally high temperature variations within the heater and automatically switches it off to prevent overheating.

4

Features of your Compact Oscillating Ceramic Heater

AUTOTEMP SET

TEMP

5

Oscillation functionTheheateroscillates90degreestoprovidegreater heat distribution. Simply press the oscillationbutton(oSC)toactivatethisfunction.

Electronic thermostatTheelectronicthermostatallowsforprecisetemperature control. Select the auto mode to set the electronic thermostat and turn the thermostat dial to the desired heat setting. Once your desired temperature is reached, the heater will cycle on and off to maintain it.

Thermostat dialWhen in auto mode, turn the thermostat dial to select your desired temperature.

Ceramic elementThe1800wattceramicelementismoreefficient than other element types as it converts more electricity into heat.

Ceramic elements are also safer than other elementtypes.Theydonotglowandoperateat such low temperatures that they will not ignite even highly flammable materials such as tissue paper.

AUTOTEMP SET

TEMP

6

1.Placetheheateronaflatlevelsurfaceandensure that the air intake and outlet are clear of obstructions.

2.inserttheplugintoa230/240Vpoweroutlet and turn the power on.

3.ThepoweronlightandlCDscreenwillilluminate.

NOTE: When the heater is switched on it will be automatically set to the Standby mode.

4.Pressthemodebuttontoselectthedesired setting, as follows. Each time you press the mode button it will scroll through the various settings.

LOW – low heat setting

high – high heat setting

AuTo – for operating the electronic thermostat

FAN – for fan only operation without heat

STANDby – the heater remains inactive when in this mode

NOTE:Thefanspeedwillnotchangewhenthe mode is changed from low to high.

5.Toswitchtheheateroff,pressthemodebutton until the standby mode is set and switch the power off at the power outlet.

Setting the electronic thermostat Theelectronicthermostatallowsyoutoset

the precise temperature. Once the desired temperature level is reached the heater will cycle on and off to maintain it.

1.PressthemodebuttonuntiltheAuTomodeisdisplayed.ThelCDscreenwilldisplay the ambient room temperature.

2. Set the desired temperature by turning the thermostatdial.TheselectedtemperaturewillappearonthelCDscreen.

NOTE:Thetemperaturerangeisfrom 15ºCto30ºC.

3.whentheroomtemperaturereachesthe set temperature the heater will automaticallyturnoff.Thefanwillcontinuerunningfor15secondstocooltheheater.Theunitwillonlyturnonwhenthe room temperature falls below the preset temperature.

NOTE: It is normal for the heater to cycle on and off as it maintains the preset temperature.Topreventtheunitfromcycling, raise the thermostat setting.

Using your Compact Oscillating Ceramic Heater

7

Using the Oscillation Function

The90degreeoscillationfunctioncanbeusedinanymodeexceptstandby.

1.Presstheoscillationbutton(oSC),positionedonthetopoftheheater.Theheater will then begin to oscillate from side to side.

2.Tostoptheheaterfromoscillating,simplypresstheoscillationbutton(oSC)onceagain.

Resetting the Total Safety System

Resetting the safety auto shut-off

Thesafetyautoshut-offdetectsanyabnormally high temperatures within the heater and shuts it off to prevent overheating. Should the safety auto shut-off activate and switch off the heater, it will need to be reset.

1.Toresettheheater,pressthemodebuttonuntil the standby mode is selected.

2.unplugtheheaterandwait10minutesforthe unit to cool down.

3.After10minutes,plugtheheaterinagainand operate as usual.

Resetting the thermal backup device

In addition to the safety auto shut-off, your heater also contains a thermal back-up device for additional protection. Should the thermal back-up device activate and switch off the heater it will need to be reset.

Toresettheheater,followsteps1to3onthis page.

8

If your heater fails to operate check the following:

•Makesuretheelectricaloutletorcircuitbreaker is working.

•Checkforobstructions.ifyoufindanobstruction, turn the heater off and follow the reset instructions on page 7.

•Checkthatthethermostatisnotsettoolow.Turnthethermostatdialclockwisetoadjusttheelectronicthermostatuntiltheheater restarts.

•Thesafetyautoshut-offmayhaveactivated, so follow the instructions for resetting on page 7.

Troubleshooting Guide

Ensure that the heater is switched off and disconnected from the power outlet before cleaning.

Carefullywipetheexterioroftheheaterwitha soft damp cloth and dry thoroughly with a dry cloth.

Over time, dust may accumulate on the front grilles.Thiscanberemovedbywipingwithadamp cloth.

Store the heater in a cool dry place when not in use. Store the heater in its carton if possible.

Care and Cleaning

Shouldyouexperienceanydifficultieswithyour appliance, please phone our customer servicelineforadviceon1300881861inAustralia,or0800786232inNewZealand.Alternatively,youcansendawrittenclaim to Sunbeam at the address listed below. On receipt of your claim, Sunbeam will seek to resolve your difficulties or, if the appliance is defective, advise you on how to obtain a replacement or refund.

yourSunbeam2yearReplacementguaranteenaturallydoesnotcovermisuse or negligent handling and normal wear and tear.

Similarlyyour2yearReplacementguaranteedoes not cover freight or any other costs incurred in making a claim. Please retain your receipt as proof of purchase.

Thebenefitsgiventoyoubythisguaranteeare in addition to your other rights and remedies under any laws which relate to the appliance.

Our goods come with guarantees that cannot beexcludedundertheAustralianConsumerlawandundertheNewZealandConsumerguaranteesAct.

inAustraliayouareentitledtoareplacementorrefundforamajorfailureandfor compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to amajorfailure.

Should your appliance require repair or service after the guarantee period, contact your nearest Sunbeam service centre.

ForacompletelistofSunbeam’sauthorisedservice centres visit our website or call:

Australia www.sunbeam.com.au

1300881861units5&6,13lordStreet botanyNSw2019Australia

New Zealand www.sunbeam.co.nz

080078623226VesteyDrive,Mtwellington Auckland,NewZealand

In the unlikely event that this appliance develops any malfunction within 2 years of purchase (3 months commercial use) due to faulty materials or manufacture, we will replace it for you free of charge.

2 Year Replacement Guarantee

is a registered trademark.

Need help with your appliance?Contact our customer service team or visit our website for information and tips on getting the most from your appliance.

In Australia

Visit www.sunbeam.com.au

Or call 1300 881 861

In New Zealand

Visit www.sunbeam.co.nz

Or call 0800 786 232

Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright. Sunbeam Corporation Limited 2006.ABN 45 000 006 771

Units 5 & 6, 13 Lord Street Botany NSW 2019 AustraliaUnit 3, Building D 26 Vestey Drive Mt Wellington Auckland New Zealand Sunbeam Corporation is a division of GUD Holdings Ltd. 8/11