COMMERCIAL DOOR OPERATORS & ACCESSORIES PRICE LIST – EFFECTIVE
MAY 4, 2012
www.GenieCompany.com/commercial | 800.843.4084 1
Terms and Conditions
.......................................................................................................................2
Product Pricing
............................................................................................................................9-27
GCL-MT Medium-Duty Trolley Operator
..............................................................................12-13
GCL-T Standard-Duty Trolley Operator
...............................................................................14-15
GCL-GT Heavy-Duty Trolley Operator
..................................................................................16-17
GCL-MH Medium-Duty Hoist Operator
...............................................................................22-23
GCL-H Standard-Duty Hoist Operator
.................................................................................24-25
GCL Commercial Operator Options
............................................................................................29-44
GCL Commercial Operator Accessories
....................................................................................45-57
Contents
2
The following are the terms and conditions upon which the ordering
party (“Customer”) may order goods from The Genie Company (the
“Company”).
ACCEPTANCE – All orders are subject to acceptance by the Company.
The Company may refuse any order for any reason. No order will be
binding on the Company unless and until it is accepted in writing
by the Company.
SALES TERMS AND CONDITIONS – If any order is accepted by the
Company, the terms and conditions of sale of the goods sold by the
Company to the Customer shall be those contained on this order
form, those contained on the Company’s invoice, and if applicable,
those contained in any existing Distribution Agreement or sales
agreement signed by the Company and the Customer. Customer’s order
shall constitute acceptance of these terms and conditions of sale.
Any inconsistent or additional terms or conditions in any purchase
order or other document from Customer shall not apply, and shall be
deemed rejected by the Company not withstanding any subsequent
shipment, acceptance of payment or other act by the Company.
ADDITIONAL TERMS – All orders will also be subject to the standard
terms and conditions in the Company’s Invoice and Order
Acknowledgment. No additional terms submitted by Customer, whether
on Customer’s Purchase Order or any other document, shall operate
to change or supersede any of the Company’s provisions, and any
such terms and conditions submitted by Customer are specifically
rejected and shall have no force and effect.
CREDIT LIMITS – Customer’s credit limits will apply to all orders.
The Company may decline to ship any accepted order if, prior to
shipment, Customer’s account is not within Customer’s credit terms
and credit limits established by the Company.
PRICING – If order pricing is incorrect, the Company may correct it
with notice to Customer. Special discounts and all other
non-standard pricing will only apply upon written confirmation of
such pricing by the Company. In the absence of such confirmation,
the Company’s standard pricing to Customer will apply.
DELIVERY – All orders shall be for the Company’s normal delivery
schedule unless otherwise confirmed in writing by the Company. The
Company may change requested delivery dates with notice to
Customer.
TAXES – Sales use, consumption, storage or other taxes if
applicable, shall be paid by the Customer.
DEDUCTIONS – All deductions must be pre-approved by the Company.
The Company may bill Customer’s account for unauthorized
deductions.
DISPUTES – Customer is required to check order acknowledgments for
errors and notify the Company immediately. Customer is required to
notify the Company’s
Credit Department of document discrepancies within 30 days of
document (invoice, credit memo, statement) date.
ORDER CANCELLATION – Orders cannot be cancelled after shipment.
Non-standard product may be subject to a cancellation fee, in an
amount determined by the Company, which may be up to the amount of
the purchase price of the cancelled order.
WARRANTY* – The Company’s standard limited warranty for the product
purchased shall apply. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF
ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. The Company neither assumes, nor authorizes any
other party or person to assume for it, any other obligation or
liabilities in connection with the sale of the product
purchased.
LIMITATION OF LIABILITY – IN NO EVENT SHALL THE COMPANY BE
RESPONSIBLE FOR OR LIABLE TO CUSTOMER FOR SPECIAL, INDIRECT,
COLLATERAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
resulting from the Company’s performance or non-performance hereof,
even if the Company has been advised of the possibility of such
damages. Such excluded damages include, but are not limited to,
loss of goodwill, loss of profits, loss of use, interruption of
business, or other damages resulting from any delay, act, error or
omission of the Company or any subcontractor of the Company.
FORCE MAJEURE – The Company shall have no liability to Customer for
delay or failure to perform, in whole or in part, by reason of acts
of war, civil commotion, riot, acts of public enemies, fire,
explosion, earthquake, epidemic, flood, cyclone, hurricane or
tornado, strike, labor trouble, equipment breakage, accident, acts
of governmental authority, acts of God or any other contingencies
beyond the reasonable control of the Company.
FREIGHT – Payment of all freight charges shall be made in
accordance with the terms of the relevant invoice. When shipment is
made by common carrier, risk of loss shall pass to Customer at the
Company’s plant upon shipment.
PAYMENT – The Company will invoice Customer with each shipment.
Customer agrees to pay each invoice in accordance with the terms
set forth on the invoice. Payment must be received on or before
dates indicated on the invoice.
SERVICE CHARGE – The Company may charge a service charge equal to
the lesser of either (i) two percent (2%) per month on all past due
amounts, or (ii) the maximum monthly interest charge permitted
under applicable law.
STATE LAW – This order will be construed in accordance with the
laws of the State of Ohio.
*See Full Warranty for complete details on the measurement for
number of cycles.
Terms and Conditions
www.GenieCompany.com/commercial | 800.843.4084 3
4
– Duty Cycle Selection
The GCL operators are broken down into duty-cycle segments based on
the number of cycles required per hour. Note that not all types of
operators are available in each duty cycle.
– Horsepower Selection
Once the correct operator model type has been selected, the
horsepower can be determined. Refer to the door “Commercial
Operator Sectional Door Chart” chart on a following page. Select
the door type being used at the top of the page and then move down
the square footage chart until the previously-selected operator
model is shown in the correct horsepower to accommodate your
door.
– Operating Type
– Voltage Selection
The correct voltage will need to be determined based on your
installation. For MultiVolt™ capable operators, the operator can be
selected based upon phase (1 or 3).
How to Order OPERATOR SELECTION
Door Application
up to 30 cycles / hr < 100 cycles / day
up to 60 cycles / hr > 100 cycles / day
Rolling Counter /
Sectional Side / Center - GCL-MJ
GCL-MH GCL-H GCL-J GCL-GH
Jackshaft J
Trolley T
Voltage (Field Adjustable) P/N Code 115 / 208 / 230 VAC 0
208 / 230 / 460 VAC 0
Voltage (Fixed) P/N Code 115 VAC 1
220-230 VAC 2
575 VAC 5
3/4 75
1 10
3 30
1
3
* For HJ and HT models, please refer to the options pages for more
information.
2
4
– Phase/Frequency Selection
GCL operators are available in single phase or three phase 60Hz or
50Hz. The following table shows the part number code for phase/
frequency:
– Electric Brake
Depending on the model, an electric brake may be available. The
following table shows the part number code for brake or
no-brake:
Phase Hz P/N Code 1 60 1
3 60 3
1 50 4
3 50 6
No Brake Blank
– Handing
Handing must be specified on GCL-H operators. GCL-GH operators are
shipped right-hand only from the factory, but easily can be
field-changed to left hand. The GCL-MH model is only available in
right-hand version.
GCL Part Number Structure
GCL operators use a part numbering system which describes the duty
cycle, model, horsepower, voltage, phase and other characteristics
of each operator. The part number framework is below. The values to
be loaded into the part number are determined through the selection
of the operator. Please see each section 1 – 8 for how to build a
complete part number.
– Environmental Modification
GCL operators are available with several environmental options.
These options range from a non-ventilated motor to a complete Nema
4X operator. Please refer to the modification table below for model
and option information.
7 8
Left L
Environmental Modification P/N Code None (Open Drip Proof Motor)
Blank
Totally Enclosed Non-Ventilated Motor NV
Totally Enclosed Fan-Cooled Motor FC
NEMA 4 Complete Operator N4
NEMA 4X Complete Operator N4X
OPG SX H 50 0 1 B R NV Operator Brand
Operator = OP Genie = G
Heavy = HX
Jackshaft = J Trolley = T
Horsepower (Sec 3) 1/2 HP = 50 3/4 HP = 75
1 HP = 10 3 HP = 30
Environmental Modifications (Sec 8) Blank = None (Open Drip Proof
Motor) NV = Totally Enclosed Non-Ventilated Motor FC = Totally
Enclosed Fan-Cooled Motor N4 = NEMA 4 Complete Operator N4X = NEMA
4X Complete Operator
Hoist Handing (Sec 7) Blank = None (Open Drip Proof Motor) R =
Right Hand L = Left Hand
Voltage AC (Sec 4) 1 = 115V 60Hz 2 = 230V 60Hz 0 = 115/208/230V
60Hz 0 = 208/230/460V 60Hz 5 = 575V 60Hz 2 = 220V 50Hz 4 =
(380/415)V 50Hz
Brake (Sec 6) Blank = None (Open Drip Proof Motor) B = Electric
Actuated Brake
Phase (Sec 5) 1 = Single Phase 60Hz 3 = Three Phase 60Hz 4 = Single
Phase 50Hz 6 = Three Phase 50Hz
6
Commercial Steel Insulated & Non-Insulated (Square Feet)
Thermospan®
Door Series 216 216 Ins. 220 220
Ins. 2415 2415 Ins. 2411 2411
Ins. 125 150 200 200-20 5150 5200 451 452
Flush Ribbed Insulated Insulated
Model HP UL LISTED
GCL-MT GCL-MJ GCL-MH
1/2 YES TS 620 170 120 230 160 270 200 300 256 256 256 240 160 256
256 210 144
GCL-T GCL-J GCL-H
1/2 YES TSC 1120 256 220 370 256 440 340 320 320 256 360 400 300
400 380 360 240
GCL-T GCL-J GCL-H
3/4 YES TSC 1370 330 256 440 310 530 400 320 320 256 450 450 370
460 440 400 330
GCL-T GCL-J GCL-H
1 YES TSC 1620 380 280 500 370 570 410 320 320 256 480 480 420 500
480 400 400
GCL-GT GCL-GH 1/2 YES TSC 1310 300 256 410 280 520 400 320 320 256
430 430 350 450 430 400 320
GCL-GT GCL-GH 3/4 YES TSC 1450 340 256 450 320 540 410 320 320 256
450 450 400 480 460 400 350
GCL-GT GCL-GH 1 YES TSC 1650 390 290 510 380 580 410 320 320 256
480 480 420 510 490 400 400
GCL-GH 3 YES SC 3696 700 500 700 560 770 600 320 320 256 480 900
680 530 680 400 400
1. Total door weight, and not the square footage, is the critical
factor in selecting the proper operator. Square foot measurements
are based on “square doors” (example = 16’ x 16’).
2. Doors that require special wind-loading and wide doors normally
require increased strutting (reinforcement). Strutting doors can
significantly increase door weight beyond maximum weight shown.
Consult with door customer service for the impact of wind load and
strutting on square foot limits.
3. The following doors are roughly equivalent. Square foot values
above are based on the doors listed above, but may be applied to
the doors below as well.
220 is roughly equivalent to C20 2415 is roughly equivalent to C24
2411 is roughly equivalent to C2400
4. “UL listed” refers to the operator alone, not the operator-door
combination
5. Door options such as AFV sections can add significant weight to
a door. Consult with the door customer service for the impact of
particular options on size limits.
6. For “Commercial Steel Insulated” category, various “backer”
options are available. The chart above is based in all cases on the
thickest backer available.
7. For “Aluminum Full View” category, various glazing options are
available. The chart above is based in all cases on the heaviest
glazing available.
8. “PU-FIP” stands for “polyurethane, foamed-in-place.” If no
notation is present, insulation is “polystyrene
laid-in-place.”
Notes:
SIDE/CENTER MOUNT SECTIONAL DOOR SPEED (INCHES/SECONDS)
Type Door STD STD STD STD L.C. L.C. L.C. L.C. L.C. L.C. F.V. F.V.
F.V.
DRUM 400-8/ 400-12
D850-132 1100-18/
D1100-216 1350-28/
D1350-336
Max Wt per Cable 250 184 500 925 250 490 - 385 800 1100 425 335
700
Max Door Height 8’3”/ 12’6” 10’0” 19’6”/
18’ 24’/ 32’ 12’1” 16’1” 16’ 0” 17’1” 21’1” 22’ 0” 11’0” 18’0”
28’0”
Max Drum Turns 7.8/ 12.0 9.3 15.0/
12.8 12/15 13.3 13 11 12.8 16.9 10.26 7.9 10.4 13.6
Drum Radius [IN] 2. 27
5
Door Sprocket
41B28 1” Bore P/N 086654.2816.S
27.9 S 6.6 6.0 6.9 6.3 8.5 8.0 8.3 6.0 10.4 7.9 11.5 7.5
GCL-MJ GCL-MH 65
41B48 1” Bore P/N 075004.0003.S
16.3 S 3.9 3.5 4.0 3.7 4.9 4.7 7.5 7.0 4.8 3.5 6.1 4.6 6.7 4.4 7.8
5.1 9.1 5.6 9.3 7.4 7.1 2.3 9.1 2.3 11.0 2.3
GCL-J GCL-H 39
50B17 1” Bore P/N 086446.1716.S
27.5 SC 6.6 5.9 6.8 6.2 8.4 7.9 8.2 5.9 10.3 7.8 11.4 7.4 12.1
3.9
GCL-J GCL-H 39
50B26 1 1/4” Bore P/N 111916.2026.S
18.0 SC 4.3 3.9 4.5 4.1 5.5 5.2 8.3 7.8 5.3 3.9 6.7 5.1 7.4 4.8 8.6
5.6 10.1 6.2 10.3 8.2 7.9 2.5 10.1 2.5 12.2 2.6
GCL-GH 43 50B17 1” Bore P/N 086446.1716.S
30.4 SC 7.2 6.6 7.5 6.9 9.2 8.7 9.0 6.6 11.4 8.6
GCL-GH 43
50B26 1 1/4” Bore P/N 111916.2026.S
19.8 SC 4.7 4.3 4.9 4.5 6.0 5.7 9.1 8.6 5.9 4.3 7.4 5.7 8.2 5.3 9.5
6.2 11.1 6.9 11.4 9.0 8.7 2.8 11.1 2.8
GCL-GH 43
50B31 1 1/4” Bore P/N 086446.3120.S
16.6 SC 4.0 3.6 4.1 3.8 5.1 4.8 7.7 7.2 4.9 3.6 6.2 4.7 6.9 4.5 7.9
5.2 9.4 5.8 9.5 7.6 7.3 2.3 9.3 2.3 11.3 2.4
1. Max recommended door speeds for side/center mount
operators:
Standard lift – 10.6 inches/seconds Lift clearance (high lift) –
12.3 inches/seconds Full vertical – 12.3 inches/seconds
2. Excessive door speed can result in throwing door cables,
therefore do not use sprocket/drum combinations in the dark grayed
out areas of the chart.
3. The larger the door size and weight, the slower the door speed
should be for good service and life.
4. Maximum speed has been calculated using full-drum taper diameter
and this speed occurs just as the door meets the floor. If less
than full drum capacity is used, the maximum speed will be
less.
5. Shaft drive operators used with standard track should use pusher
springs and additional horizontal track rise.
6. The standard sprocket included with the operator is a
12-tooth.
7. Verify door shaft center distance to allow for sprocket
diameter
Notes:
8
COMMERCIAL OPERATOR ROLLING STEEL DOOR CHART
Door Series Steel Non-Insulated Steel
Insulated Counter Doors Grilles
FireStar 2” Slat (Square
FireStar 3” Slat
Insulated (Square Feet)
(Lbs.)
16GA. 18GA. 20GA. 22GA. 24GA. 26GA. 18GA. 20GA. 22GA. Aluminum STL/
SST Aluminum STL/
SST 20GA. 22GA. 16GA. 18GA. 20GA. 22GA. 22GA. 22GA. 26GA.
GCL-GCX 1/2 Yes 500 N/A N/A 144 144 144 144 N/A N/A N/A 126* 126*
142 108 82 94 N/A N/A N/A N/A N/A N/A N/A
GCL-MH GCL-MJ 1/2 Yes 580 197 246 246 338 394 394 148 276 197 126
126 300 200 N/A N/A N/A N/A N/A N/A N/A N/A 256
GCL-H GCL-J 1/2 Yes 998 297 333 333 416 476 476 238 296 274 126 126
350 240 N/A N/A N/A N/A N/A N/A N/A N/A N/A
GCL-H GCL-J 3/4 Yes 1220 359 419 419 552 618 N/A 276 276 309 126
126 450 310 N/A N/A N/A N/A N/A N/A N/A N/A N/A
GCL-H GCL-J 1 Yes 1440 388 461 461 606 621 N/A 297 296 382 126 126
610 450 N/A N/A N/A N/A N/A N/A N/A N/A N/A
GCL-GH 1/2 Yes 1310 250 277 277 333 360 360 194 194 222 126 126 360
280 210 270 128 144 166 220 120 128 N/A
GCL-GH 3/4 Yes 1450 283 350 350 442 494 N/A 232 232 283 126 126 490
350 N/A N/A N/A N/A N/A N/A N/A N/A N/A
GCL-GH 1 Yes 1650 318 420 420 548 636 N/A 244 244 303 N/A N/A 580
380 320 355 176 188 246 272 160 180 N/A
GCL-GH 3 Yes 3696 962 1035 1152 1152 1152 N/A 728 728 986 N/A N/A
982 982 576 576 342 390 576 576 300 324 N/A
1. Total door weight, and not the square footage, is the critical
factor in selecting the proper operator. Square foot measurements
are based on “square doors” (example = 16’ x 16’).
2. Under-balanced Fire Shutters have a max square footage of 52
square feet for 22 gauge steel and 42 square feet for 20 gauge
steel.
Notes:
10
APPLICATIONS
The GCL-GCX is designed for rolling counter doors and rolling
counter fire doors that have a 4-cycle/hour or less duty
requirement.
Maximum door height: 10 feet.
STANDARD FEATURES
• Thermally protected intermittent-duty 1/2 HP AC capacitor
start/run motor. Motor replaceable without changing limits.
• Limited-duty, 4 cycles per hour rating.
• Multiple max run timers automatically adjust to up and down run
time.
• Worm gear primary reduction.
GCL-GCX LIGHT-DUTY COUNTER DOOR OPERATOR
ADVANTAGES
• Completely enclosed drive allows for mounting under 8 feet, while
still maintaining UL325 approval.
• Modular design with optional expansion boards for advanced timer
to close, or auxiliary output functionality.**
• Worm gear primary drive reduction provides inherent, mechanical
braking.
• Fire counter door model available.
• LCD display with intuitive setup menu. Provides current status
and trouble-shooting assistance.
• Open/close/stop and setup keys included on control board. Keeps
all controls within inches of the LCD display used for setup.
**Time close module not available on fire-door version.
AMPERAGE RATING - 60Hz
HP 115V 1Ø
GCL-GCX | LIGHT-DUTY COUNTER DOOR OPERATOR
GCX counter door operators must be ordered left or right hand. List
price includes standard, monitored, photoeye with adjustable
bracket.
MONITORED ENTRAPMENT DEVICES
38176R.s ................... Standard photoeye with adjustable
bracket.
.............................................................
Included
No Photoeye .............. Monitored safety edge, or constant
contact close operation desired. .............. Deduct $39.62
OPAKPE.s ................... Impact protected commercial photoeye
with ability for conduit connection. .........Add $55.86
OPAKPEN4GX.s ........... Nema 4 photoeyes on resilient mount
..................................................................
Add $44.36
Safety Edge ................ See edge options in accessories for
more details.
½ HP - SERVICE DOOR ONLY
Part Number Voltage Ph Hz List Price
OPGCX5011R ............115 ............1 ......... 60
...............$755
OPGCX5011L ............115 ............1 ......... 60
...............$755
½ HP - COUNTER FIRE DOOR
Part Number Voltage Ph Hz List Price
OPGCX5011FDR .......115 ............1 ......... 60
...............$866
OPGCX5011FDL ........115 ............1 ......... 60
...............$866
DOOR SPROCKET SELECTION
Part Number Description Adjust List Price 292474
.............................. 41B40, 1” Bore, 1/4” Keyway,
Standard for Rolling Door
...................................................................................
N/C
1. Max Door Weight and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height: 10’ 3.
Underbalanced Fire Shutters have a max square footage of 52 square
feet for 22 gauge steel and 42 square feet for 20 gauge
steel.
Notes:
Door Series Steel Non-Insulated Steel Insulated Counter Doors
Grilles FireStar2” Slat
FireStar3” Slat
Model Max
Door Wt. (Lbs.)
16GA. 18GA. 20GA. 22GA. 24GA. 26GA. 18GA. 20GA. 22GA. Aluminum
STL/SST Aluminum STL/SST 20GA. 22GA. 16-22GA.
GCX 500 N/A N/A 144 144 144 144 N/A N/A N/A 126* 126* 142 108 82 94
N/A
12
APPLICATIONS
The GCL-MT is designed for high or full-lift sectional doors that
have a 15-cycle/hour or less duty requirement.
Maximum door height: 14 feet.
STANDARD FEATURES
• Thermally protected intermittent-duty 1/2 HP AC capacitor
start/run motor. Motor replaceable without changing limits.
• 11.5 inches per second door speed.
• Adjustable friction clutch.
• Multiple max run timers automatically adjust to up and down run
time.
• TensiBelt™ primary reduction. Chain and sprocket secondary
reduction.
• Precision radial ball bearings in critical areas.
• Delay on reverse.
• 16-character LCD display.
GCL-MT MEDIUM-DUTY TROLLEY OPERATOR
ADVANTAGES
• Rated for 15 cycles per hour operation. More cycles to get the
most out of a medium-duty operator.
• Modular design with optional expansion boards for advanced timer
to close, and auxiliary output functionality.
• Optional Intellicode® I plug and play receiver learns up to 50
transmitters. Learn and delete individual transmitters directly
from LCD display.
• TensiBelt™ primary drive reduction eliminates need to adjust belt
tension.
• Available in either 115V or 230V AC 1Ø 60Hz. Expanded offering
increases applications available for medium-duty use.
• LCD display with intuitive setup menu. Provides current status
and trouble-shooting assistance.
• Open/close/stop and setup keys included on control board. Keeps
all controls within inches of the LCD display used for setup.
AMPERAGE RATING 1Ø 60Hz
Door Series
216 216 Ins. 220 220
Ins. 2415 2415 Ins. 2411 2411
Ins. 125 150 200 200-20 5150 5200 451 452
Flush Ribbed Insulated Insulated
1/4” or 1/2” Glass 1.38”
1/2 HP 620 170 120 230 160 270 200 300 256 256 256 240 160 256 256
210 144
1. Max Door Weight and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height 14’ 3.
For “Commercial Steel Insulated” category, various “backer” options
are available. The chart above is based in all cases on the
thickest backer available. 4. “PU-FIP” stands for “polyurethane,
foamed-in-place.” If no notation is present, insulation is
“polystyrene laid-in-place.”
Notes:
List price includes standard, monitored, photoeye with adjustable
bracket.
* AC solenoid-actuated band brake is factory-installed. Brake
cannot be added in the field.
GCL-MT | MEDIUM-DUTY TROLLEY OPERATOR
½ HP – NO BRAKE
MONITORED ENTRAPMENT DEVICES
OPGMXT5011 ...........115 ............1 ......... 60
...............$533
OPGMXT5031 ...........230 ............1 ......... 60
...............$618
Description Add to List
Part Number Description Adjust List Price
38176R.s .................... Standard photoeye with adjustable
bracket.
.............................................................
Included
No Photoeye .............. Monitored safety edge, or constant
contact close operation desired. .............. Deduct $39.62
OPAKPE.s ................... Impact protected commercial photoeye
with ability for conduit connection. .........Add $55.86
OPAKPEN4GX.s ........... Nema 4 photoeyes on resilient mount
..................................................................
Add $44.36
Safety Edge ................ See edge options in accessories for
more details.
Part Number Voltage Ph Hz List Price
OPGMXT5011B .........115 ............1 ......... 60
...............$591
OPGMXT5031B .........230 ............1 ......... 60
...............$675
14
APPLICATIONS
The GCL-T is designed for standard-lift sectional doors, that have
a 30-cycle/hour or less duty requirement.
Maximum door height: 24 feet.
STANDARD FEATURES
• EZ Limit™ electromechanical limits.
• MultiVolt™ voltage simplification.
• Adjustable friction clutch.
• Multiple max run timers automatically adjust to up and down run
time.
• TensiBelt™ primary reduction. Chain and sprocket secondary
reduction.
• Precision radial ball bearings in critical areas.
• Delay on reverse.
• 16-character LCD display.
• UL325 2010-approved.
• Advanced radio receiver displays and stores activation by
transmitter ID number on the LCD screen.
• 3-button control station.
• Drawbar disconnect for emergency manual operation.
• 24VDC disc brake with progressive braking standard on ¾ HP and 1
HP models.
• Door speed of 11.5 inches per second.
GCL-T STANDARD-DUTY TROLLEY OPERATOR
ADVANTAGES
• MultiVolt™ - Order phase specific operator for the job and have
the ability to select the right voltage on the job site. - Single
phase: 115/208/230 VAC - Three phase: 208/230/460 VAC - 575VAC
voltage models available separately
• LCD display with intuitive setup menu. Provides current status
and trouble-shooting assistance.
• Internal receiver with the ability to individually add/delete up
to 50 Intellicode® I transmitters directly from the LCD
display.
• TensiBelt™ primary drive reduction eliminates need to adjust belt
tension.
• EZ Limit™ provides for push to set limits that stay synchronized
with door through long-term loss of power.
• Open/close/stop and setup keys included on control board.
• Modular design with optional boards for advance timer to close,
and auxiliary output functionality.
AMPERAGE RATING - 60Hz
HP 115V 1Ø
www.GenieCompany.com/commercial | 800.843.4084 15
1. Max Door Weight and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height 24’ 3.
For “Commercial Steel Insulated” category, various “backer” options
are available. The chart above is based in all cases on the
thickest backer available. 4. “PU-FIP” stands for “polyurethane,
foamed-in-place.” If no notation is present, insulation is
“polystyrene laid-in-place.”
Notes:
½ HP models come standard without brake. See modification pages for
adding brake. List price includes standard, monitored, photoeye
with adjustable bracket.
GCL-T | STANDARD-DUTY TROLLEY OPERATOR
MONITORED ENTRAPMENT DEVICES
OPGSXT5001 .....115/208-230 .....1 ......... 60
...............$602
OPGSXT5003 .....208-230/460 .....3 ......... 60
...............$648
OPGSXT5053 ............575 ............3 ......... 60
...............$667
Description Add to List
Doors up to 14’
....................................................... $18.10
Doors up to 16’
....................................................... $33.61
Doors up to 18’
....................................................... $50.00
Doors up to 20’
....................................................... $63.79
Doors up to 24’
.......................................................
$93.09
Part Number Description Adjust List Price
38176R.s ................... Standard photoeye with adjustable
bracket.
.............................................................
Included
No Photoeye .............. Monitored safety edge, or constant
contact close operation desired. .............. Deduct $39.62
OPAKPE.s ................... Impact protected commercial photoeye
with ability for conduit connection. ....................Add
$55.86
OPAKPEN4GX.s ........... Nema 4 photoeyes on resilient mount
..................................................................
Add $44.36
Safety Edge ................ See edge options in accessories for
more details.
Part Number Voltage Ph Hz List Price
OPGSXT7501B ...115/208-230 .....1 ......... 60
...............$745
OPGSXT7503B ...208-230/460 .....3 ......... 60
...............$801
OPGSXT7553B ..........575 ............3 ......... 60
...............$801
MAX DOOR SIZE (SQ*FT) - SECTIONAL
Door Series
216 216 Ins. 220 220 Ins. 2415 2415
Ins. 2411 2411 Ins. 125 150 200 200-20 5150 5200
451 452
1/4” or 1/2” Glass 1.38”
1/2 HP 1120 256 220 370 256 440 340 320 320 256 360 400 300 400 380
360 240
3/4 HP 1370 330 256 440 310 530 400 320 320 256 450 450 370 460 440
400 330
1 HP 1620 380 280 500 370 570 410 320 320 256 480 480 420 500 480
400 400
1 HP
OPGSXT1001B ...115/208-230 .....1 ......... 60
...............$906
OPGSXT1003B ...208-230/460 .....3 ......... 60
...............$964
OPGSXT1053B ..........575 ............3 ......... 60
...............$964
16
APPLICATIONS
The GCL-GT is designed for standard-lift sectional doors that have
up to 60-cycle/hour duty requirement.
Maximum door height: 24 feet.
STANDARD FEATURES
• EZ Limit™ electromechanical limits.
• MultiVolt™ voltage simplification.
• Multiple max run timers automatically adjust to up and down run
time.
• Heavy-duty worm gear running in oil bath.
• #41 Trolley chain on all models.
• Adjustable friction clutch.
• Delay on reverse.
• 16-character LCD display.
• UL325 2010-approved.
• Advanced radio receiver displays and stores activation by
transmitter ID number on the LCD screen.
• 3-button control station.
• 24VDC disc brake with progressive braking.
GCL-GT HEAVY-DUTY TROLLEY OPERATOR
ADVANTAGES
• MultiVolt™ - Order phase specific operator for the job and have
the ability to select the right voltage on the job site. - Single
Phase: 115/208/230 VAC - Three Phase: 208/230/460 VAC - 575VAC
Voltage models available separately
• LCD display with intuitive setup menu. Provides current status
and trouble-shooting assistance.
• Internal receiver with the ability to individually add/delete up
to 50 Intellicode® I transmitters directly from the LCD
display.
• EZ Limit™ provides for push to set limits that stay synchronized
with door through long-term loss of power.
• Open/close/stop and setup keys included on control board.
• Modular design with optional boards for advance timer to close,
and auxiliary output functionality.
AMPERAGE RATING - 60Hz
HP 115V 1Ø
www.GenieCompany.com/commercial | 800.843.4084 17
MONITORED ENTRAPMENT DEVICES
38176R.s ................... Standard photoeye with adjustable
bracket.
.............................................................
Included
No Photoeye .............. Monitored safety edge, or constant
contact close operation desired. .............. Deduct $39.62
OPAKPE.s ................... Impact protected commercial photoeye
with ability for conduit connection. .........Add $55.86
OPAKPEN4GX.s ........... Nema 4 photoeyes on resilient mount
..................................................................
Add $44.36
Safety Edge ................ See edge options in accessories for
more details.
½ HP
OPGHXT5001B ...115/208-230 .....1 ......... 60 ...........
$1,107
OPGHXT5003B ...208-230/460 .....3 ......... 60 ...........
$1,156
OPGHXT5053B ..........575 ............3 ......... 60 ...........
$1,156
¾ HP
OPGHXT7501B ...115/208-230 .....1 ......... 60 ...........
$1,198
OPGHXT7503B ...208-230/460 .....3 ......... 60 ...........
$1,255
OPGHXT7553B ..........575 ............3 ......... 60 ...........
$1,255
RAILS FOR OVER 12 FEET HIGH
Description Add to List
1 HP
OPGHXT1001B ...115/208-230 .....1 ......... 60 ...........
$1,305
OPGHXT1003B ...208-230/460 .....3 ......... 60 ...........
$1,377
OPGHXT1053B ..........575 ............3 ......... 60 ...........
$1,377
1. Maximum door weight, and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height 24’ 3.
For “Commercial Steel Insulated” category, various “backer” options
are available. The chart above is based in all cases on the
thickest backer available. 4. “PU-FIP” stands for “polyurethane,
foamed-in-place”. If no notation is present, insulation is
“polystyrene laid-in-place”.
Notes:
Door Series
216 216 Ins. 220 220 Ins. 2415 2415
Ins. 2411 2411 Ins. 125 150 200 200-20 5150 5200
451 452
1/4” or 1/2” Glass 1.38”
1/2 HP 1310 300 256 410 280 520 400 320 320 256 430 430 350 450 430
400 320
3/4 HP 1450 340 256 450 320 540 410 320 320 256 450 450 400 480 460
400 350
1 HP 1650 390 290 510 380 580 410 320 320 256 480 480 420 510 490
400 400
18
APPLICATIONS
The GCL-MJ is designed for high or full-lift sectional doors, and
rolling doors that have a 15-cycle/hour or less duty
requirement.
Maximum door height: 16 feet.
STANDARD FEATURES
• Thermally protected intermittent-duty 1/2 HP AC capacitor
start/run motor. Motor replaceable without changing limits.
• Adjustable friction clutch.
• Multiple max run timers automatically adjust to up and down run
time.
• TensiBelt™ primary reduction. Chain and sprocket secondary
reduction.
• Precision radial ball bearings in critical areas.
• Delay on reverse.
• 16-character LCD display.
• AC solenoid-actuated band brake.
GCL-MJ MEDIUM-DUTY JACKSHAFT OPERATOR
ADVANTAGES
• Rated for 15 cycles per hour operation. More cycles to get the
most out of a medium-duty operator.
• Modular design with optional expansion boards for advanced timer
to close, and auxiliary output functionality.
• Optional Intellicode® I plug and play receiver learns up to 50
transmitters. Learn and delete individual transmitters directly
from LCD display.
• TensiBelt™ primary drive reduction eliminates need to adjust belt
tension.
• Available in either 115V or 230V AC 1Ø 60Hz. Expanded offering
increases applications available for medium-duty use.
• LCD display with intuitive setup menu. Provides current status
and troubleshooting assistance.
• Open/close/stop and setup keys included on control board. Keeps
all controls within inches of the LCD display used for setup.
AMPERAGE RATING 1Ø 60Hz
GCL-MJ | MEDIUM-DUTY JACKSHAFT OPERATOR
OPGMXJ5011B .........115 ............1 ......... 60
...............$565
OPGMXJ5031B .........230 ............1 ......... 60
...............$624
Part Number Description Add to List
38176R.s ................... Standard photoeye with adjustable
bracket.
.............................................................
Included
No Photoeye .............. Monitored safety edge, or constant
contact close operation desired. .............. Deduct $39.62
OPAKPE.s ................... Impact protected commercial photoeye
with ability for conduit connection. .........Add $55.86
OPAKPEN4GX.s ........... Nema 4 photoeyes on resilient mount.
.................................................................
Add $44.36
Safety Edge ................ See edge options in accessories for
more details.
Part Number Description Add to List
292473 ...................... #41, 48 Tooth, 1” Bore, 1/4” Keyway,
Standard for Rolling Door
.........................................N/C
For sectional doors - see door speed chart (How to Order Section)
....................................N/C
To substitute a different sprocket for either rolling or sectional
...........................Call Factory
1. Max Door Weight and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height 16’ 3.
For “Commercial Steel Insulated” category, various “backer” options
are available. The chart above is based in all cases on the
thickest backer available. 4. “PU-FIP” stands for “polyurethane,
foamed-in-place.” If no notation is present, insulation is
“polystyrene laid-in-place.”
Notes:
Door Series
216 216 Ins. 220 220
Ins. 2415 2415 Ins. 2411 2411
Ins. 125 150 200 200-20 5150 5200 451 452
Flush Ribbed Insulated Insulated
1/4” or 1/2” Glass 1.38”
1/2 HP 620 170 120 230 160 270 200 300 256 256 256 240 160 256 256
210 144
MAX DOOR SIZE (SQ*FT) - ROLLING
Door Series Steel Non-Insulated Steel Insulated Counter Doors
Grilles Sheet Door
16GA. 18GA. 20GA. 22GA. 24GA. 26GA. 18GA. 20GA. 22GA. Aluminum
STL/SST Aluminum STL/SST 26GA.
Model
Max Door Wt.
(Lbs.) 197 246 246 338 394 394 148 148 197 126 126 300 200
256
1/2 HP 580
20
APPLICATIONS
The GCL-J is designed for high or full-lift sectional doors, and
rolling doors that have a 30-cycle/hour or less duty
requirement.
Maximum door height: 24 feet.
STANDARD FEATURES
• EZ Limit™ electro-mechanical limits.
• MultiVolt™ voltage simplification.
• Adjustable friction clutch.
• Multiple max run timers automatically adjust to up and down run
time.
• TensiBelt™ primary reduction. Chain and sprocket secondary
reduction.
• Precision radial ball bearings in critical areas.
• Delay on reverse.
• 16-character LCD display.
• UL325 2010-approved.
• Advanced radio receiver displays and stores activation by
transmitter ID number on the LCD screen.
• 3-button control station.
• Pull cord release for emergency manual operation.
• 24VDC disc brake with progressive braking standard on ¾ and 1 HP
models.
GCL-J STANDARD-DUTY JACKSHAFT OPERATOR
ADVANTAGES
• MultiVolt™ - Order phase specific operator for the job and have
the ability to select the right voltage on the job site. - Single
Phase: 115/208/230 VAC - Three Phase: 208/230/460 VAC - 575VAC
Voltage models available separately
• LCD display with intuitive setup menu. Provides current status
and troubleshooting assistance.
• Internal receiver with the ability to individually add/delete up
to 50 Intellicode® I transmitters directly from the LCD
display.
• TensiBelt™ primary drive reduction eliminates need to adjust belt
tension.
• EZ Limit™ provides for push to set limits that stay synchronized
with door through long-term loss of power.
• Open/close/stop and setup keys included on control board.
• Modular design with optional boards for advance timer to close,
and auxiliary output functionality.
AMPERAGE RATING - 60Hz
HP 115V 1Ø 208V 1Ø 230V 1Ø 208V 3Ø 230V 3Ø 460V 3Ø 575V 3Ø
1/2 10 5 5 3 3 3 2
3/4 11 6 6 3 4 3 2
1 14 7 7 4 4 3 2
www.GenieCompany.com/commercial | 800.843.4084 21
½ HP models come standard without brake. See modification pages for
adding brake. List price includes standard, monitored, photoeye
with adjustable bracket.
GCL-J | STANDARD-DUTY JACKSHAFT OPERATOR
Part Number Description Add to List 38176R.s
.......................Standard photoeye with adjustable bracket.
...........................................................................
Included No Photoeye ..................Monitored safety edge, or
constant contact close operation desired.
............................ Deduct $39.62 OPAKPE.s
....................... Impact protected commercial photoeye with
ability for conduit connection. ........................Add $55.86
OPAKPEN4GX.s ...............Nema 4 photoeyes on resilient mount.
................................................................................
Add $44.36 Safety Edge ....................See edge options in
accessories for more details.
Part Number Description Add to List 276357
..........................#50, 32 Tooth, 1” Bore, 1/4” Keyway,
Standard for Rolling Door
....................................................... N/C For
sectional doors - see door speed chart (How to Order Section)
................................................. N/C To substitute
a different sprocket for either rolling or sectional
.........................................Call Factory
1. Max Door Weight and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height 24’ 3.
For “Commercial Steel Insulated” category, various “backer” options
are available. The chart above is based in all cases on the
thickest backer available. 4. “PU-FIP” stands for “polyurethane,
foamed-in-place.” If no notation is present, insulation is
“polystyrene laid-in-place.”
Notes:
Door Series
216 216 Ins. 220 220 Ins. 2415 2415
Ins. 2411 2411 Ins. 125 150 200 200-20 5150 5200
451 452
1/4” or 1/2” Glass 1.38”
1/2 HP 1120 256 220 370 256 440 340 320 320 256 360 400 300 400 380
360 240
3/4 HP 1370 330 256 440 310 530 400 320 320 256 450 450 370 460 440
400 330
1 HP 1620 380 280 500 370 570 410 320 320 256 480 480 420 500 480
400 400
MAX DOOR SIZE (SQ*FT) - ROLLING
Door Series Steel Non-Insulated Steel Insulated Counter Doors
Grilles
Model Max
Door Wt. (Lbs.)
16GA. 18GA. 20GA. 22GA. 24GA. 26GA. 18GA. 20GA. 22GA. Aluminum
STL/SST Aluminum STL/SST
1/2 HP 998 297 333 333 416 476 476 238 238 274 126 126 350
240
3/4 HP 1220 359 419 419 552 618 N/A 276 276 309 126 126 450
310
1 HP 1440 388 461 461 606 621 N/A 297 296 382 126 126 610 450
3/4 HP Part Number Voltage Ph Hz List Price OPGSXJ7501B
.......115/208-230 .......1 .......... 60 ................. $840
OPGSXJ7503B .......208-230/460 .......3 .......... 60
................. $896 OPGSXJ7553B ..............575
..............3 .......... 60 ................. $909
1 HP Part Number Voltage Ph Hz List Price OPGSXJ1001B
.......115/208-230 .......1 .......... 60 ................. $944
OPGSXJ1003B .......208-230/460 .......3 .......... 60
..............$1,009 OPGSXJ1053B ..............575 ..............3
.......... 60 ..............$1,024
22
APPLICATIONS
The GCL-MH is designed for high or full-lift sectional doors, and
rolling doors that have a 15-cycle/hour or less duty
requirement.
Maximum door height: 16 feet.
STANDARD FEATURES
• Adjustable friction clutch.
• Multiple max run timers automatically adjust to up and down run
time.
• TensiBelt™ primary reduction. Chain and sprocket secondary
reduction.
• Precision radial ball bearings in critical areas.
• Delay on reverse.
• 16-character LCD display.
• Emergency hoist for manual operation; available in right hand
only.
• AC solenoid-actuated band brake.
GCL-MH MEDIUM-DUTY HOIST OPERATOR
ADVANTAGES
• Rated for 15 cycles per hour operation. More cycles to get the
most out of a medium-duty operator.
• Modular design with optional expansion boards for advanced timer
to close, and auxiliary output functionality.
• Optional Intellicode® I plug and play receiver learns up to 50
transmitters. Learn and delete individual transmitters directly
from LCD display.
• TensiBelt™ primary drive reduction eliminates need to adjust belt
tension.
• Available in either 115V or 230V AC 1Ø 60Hz. Expanded offering
increases applications available for medium-duty use.
• LCD display with intuitive setup menu. Provides current status
and trouble-shooting assistance.
• Open/close/stop and setup keys included on control board. Keeps
all controls within inches of the LCD display used for setup.
AMPERAGE RATING 1Ø 60Hz
HP 115V 230V
1/2 6.5 3.1
www.GenieCompany.com/commercial | 800.843.4084 23
1. Max Door Weight and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height 16’ 3.
For “Commercial Steel Insulated” category, various “backer” options
are available. The chart above is based in all cases on the
thickest backer available. 4. “PU-FIP” stands for “polyurethane,
foamed-in-place.” If no notation is present, insulation is
“polystyrene laid-in-place.”
Notes:
Medium-duty hoist models are available in right-hand version only.
List price includes standard monitored photoeye with adjustable
bracket.
GCL-MH | MEDIUM-DUTY HOIST OPERATOR
OPGMXH5011BR ......115 ............1 ......... 60
...............$601
OPGMXH5031BR ......230 ............1 ......... 60
...............$655
Part Number Description Adjust List Price
38176R.s ................... Standard photoeye with adjustable
bracket.
.............................................................
Included
No Photoeye .............. Monitored safety edge, or constant
contact close operation desired. .............. Deduct $39.62
OPAKPE.s ................... Impact protected commercial photoeye
with ability for conduit connection. .........Add $55.86
OPAKPEN4GX.s ........... Nema 4 photoeyes on resilient mount
..................................................................
Add $44.36
Safety Edge ................ See edge options in accessories for
more details.
DOOR SPROCKET SELECTION
Part Number Description Add to List
292473 ...................... #41, 48 Tooth, 1” Bore, 1/4” Keyway,
Standard for Rolling Door
.........................................N/C
For sectional doors - see door speed chart (How to Order Section)
....................................N/C
To substitute a different sprocket for either rolling or sectional
...........................Call Factory
MAX DOOR SIZE (SQ*FT) - SECTIONAL
Door Series
Commercial Steel Insulated & Non-Insulated Thermospan®
ThermoMark™ Aluminum
216 216 Ins. 220 220 Ins. 2415 2415 Ins. 2411 2411 Ins. 125 150 200
200-20 5150 5200
451 452 Flush Ribbed Insulated Insulated
Model
1/4” or 1/2” Glass 1.38”
1/2 HP 620 170 120 230 160 270 200 300 256 256 256 240 160 256 256
210 144
MAX DOOR SIZE (SQ*FT) - ROLLING
Door Series Steel Non-Insulated Steel Insulated Counter Doors
Grilles Sheet Door
16GA. 18GA. 20GA. 22GA. 24GA. 26GA. 18GA. 20GA. 22GA. Aluminum
STL/SST Aluminum STL/SST 26GA.
Model
Max Door Wt.
(Lbs.) 197 246 246 338 394 394 148 148 197 126 126 300 200
256
1/2 HP 580
24
APPLICATIONS
The GCL-H is designed for high or full-lift sectional doors, and
rolling doors that have a 30-cycle/hour or less duty
requirement.
Maximum door height: 24 feet.
STANDARD FEATURES
• Continuous duty AC motor with overload protection. Motor
replaceable without changing limits. Thermally protected.
• EZ Limit™ electro-mechanical limits.
• MultiVolt™ voltage simplification.
• Adjustable friction clutch.
• Multiple max run timers automatically adjust to up and down run
time.
• TensiBelt™ primary reduction. Chain and sprocket secondary
reduction.
• Precision radial ball bearings in critical areas.
• Delay on reverse.
• 16-character LCD display.
• UL325 2010-approved.
• Advanced radio receiver displays and stores activation by
transmitter ID number on the LCD screen.
• 3-button control station.
• Electrically interlocked emergency hoist for manual
operation.
• 24VDC disc brake with progressive braking standard on ¾ HP and 1
HP models.
GCL-H STANDARD-DUTY HOIST OPERATOR
ADVANTAGES
• MultiVolt™ - Order phase specific operator for the job and have
the ability to select the right voltage on the job site. - Single
Phase: 115/208/230 VAC - Three Phase: 208/230/460 VAC - 575VAC
Voltage models available separately
• LCD display with intuitive setup menu. Provides current status
and trouble-shooting assistance.
• Internal receiver with the ability to individually add/delete up
to 50 Intellicode® I transmitters directly from the LCD
display.
• EZ Limit™ provides for push to set limits that stay synchronized
with door through long-term loss of power.
• Open/close/stop and setup keys included on control board.
• Modular design with optional boards for advance timer to close,
and auxiliary output functionality.
AMPERAGE RATING - 60Hz
HP 115V 1Ø
www.GenieCompany.com/commercial | 800.843.4084 25
Must specify left or right-hand opener at time of order. Add either
L or R to end of part number. ½ HP models come standard without
brake. See modification pages for adding brake. List price includes
standard, monitored, photoeye with adjustable bracket.
GCL-H | STANDARD-DUTY HOIST OPERATOR
½ HP Part Number Voltage Ph Hz List Price OPGSXH5001 .............
115/208-230 .........1 .............60 ....................$780
OPGSXH5003 ............. 208-230/460 .........3 .............60
....................$821 OPGSXH5053 .....................575
................3 .............60 ....................$821
MONITORED ENTRAPMENT DEVICES Part Number Description Adjust List
Price 38176R.s ........................... Standard photoeye with
adjustable bracket.
.............................................................................................
Included No Photoeye ...................... Monitored safety edge,
or constant contact close operation desired.
.............................................. Deduct $39.62
OPAKPE.s ........................... Impact protected commercial
photoeye with ability for conduit connection.
........................................ Add $55.86 OPAKPEN4GX.s
................... Nema 4 photoeyes on resilient mount
...................................................................................................
Add $44.36 Safety Edge ........................ See edge options in
accessories for more details.
¾ HP Part Number Voltage Ph Hz List Price OPGSXH7501B ..........
115/208-230 .........1 .............60 ....................$957
OPGSXH7503B .......... 208-230/460 .........3 .............60
.................$1,004 OPGSXH7553B ..................575
................3 .............60 .................$1,004
1 HP Part Number Voltage Ph Hz List Price OPGSXH1001B ..........
115/208-230 .........1 .............60 .................$1,066
OPGSXH1003B .......... 208-230/460 .........3 .............60
.................$1,114 OPGSXH1053B ..................575
................3 .............60 .................$1,114
DOOR SPROCKET SELECTION Part Number Description Adjust List Price
276357 .............................. #50, 32 Tooth, 1” Bore, 1/4”
Keyway, Standard for Rolling Door
........................................................................
N/C For sectional doors - see door speed chart (How to Order
Section)
...................................................................
N/C To substitute a different sprocket for either rolling or
sectional
.......................................................... Call
Factory
1. Max Door Weight and not the square footage, is the critical
factor in selecting the proper operator. 2. Max Door Height 24’ 3.
For “Commercial Steel Insulated” category, various “backer” options
are available. The chart above is based in all cases on the
thickest backer available. 4. “PU-FIP” stands for “polyurethane,
foamed-in-place.” If no notation is present, insulation is
“polystyrene laid-in-place.”
Notes:
Door Series Steel Non-Insulated Steel Insulated Counter Doors
Grilles
Model Max Door Wt. (Lbs.)
16GA. 18GA. 20GA. 22GA. 24GA. 26GA. 18GA. 20GA. 22GA. Aluminum
STL/SST Aluminum STL/SST
1/2 HP 998 297 333 333 416 476 476 238 238 274 126 126 350
240
3/4 HP 1220 359 419 419 552 618 N/A 276 276 309 126 126 450
310
1 HP 1440 388 461 461 606 621 N/A 297 296 382 126 126 610 450
MAX DOOR SIZE (SQ*FT) - SECTIONAL
Door Series
216 216 Ins. 220 220 Ins. 2415 2415
Ins. 2411 2411 Ins. 125 150 200 200-20 5150 5200
451 452 Flush Ribbed Insulated Insulated
Model Max Door Wt. (Lbs.)
16GA. 16GA. Ins.
24GA.
PU-FIP 2” 20GA. Ext.
PU-FIP Raised Panel 1.38”
1/4” or 1/2” Glass 1.38”
1/2 HP 1120 256 220 370 256 440 340 320 320 256 360 400 300 400 380
360 240
3/4 HP 1370 330 256 440 310 530 400 320 320 256 450 450 370 460 440
400 330
1 HP 1620 380 280 500 370 570 410 320 320 256 480 480 420 500 480
400 400
26
APPLICATIONS
The GCL-GH is designed for high or full-lift sectional doors, and
rolling doors that have a 60-cycle/hour duty requirement.
Maximum door height: 24 feet. For doors over 24 feet, please
contact the factory.
STANDARD FEATURES
• EZ Limit™ electro-mechanical limits.
• MultiVolt™ voltage simplification.
• Multiple max run timers automatically adjust to up and down run
time.
• Heavy-duty worm gear running in oil bath.
• Delay on reverse.
• 16-character LCD display.
• UL325 2010-approved.
• Advanced radio receiver displays and stores activation by
transmitter ID number on the LCD screen.
• 3-button control station.
• 2-year/20,000-cycle warranty.
• Programmable mid-stop.
• Emergency hoist for manual operation. Easily changed in field
from left to right hand.
• 24VDC disc brake with progressive braking.
GCL-GH HEAVY-DUTY GEAR HEAD HOIST OPERATOR
ADVANTAGES
• MultiVolt™ - Order phase specific operator for the job and have
the ability to select the right voltage on the job site. - Single
Phase: 115/208/230 VAC - Three Phase: 208/230/460 VAC - 575VAC
Voltage models available separately
• LCD display with intuitive setup menu. Provides current status
and trouble-shooting assistance.
• Internal receiver with the ability to individually add/delete up
to 50 Intellicode® I transmitters directly from the LCD
display.
• EZ Limit™ provides for push to set limits that stay synchronized
with door through long-term loss of power.
• Open/close/stop and setup keys included on control board.
• Modular design with optional boards for advance timer to close,
and auxiliary output functionality.
AMPERAGE RATING 60Hz
HP 115V 1Ø
www.GenieCompany.com/commercial | 800.843.4084 27
GH models come right-handed from the factory. They are easily
changed to left hand in the field to meet the application. List
price includes standard, monitored, photoeye with adjustable
bracket.
GCL-GH | GEAR HEAD HOIST OPERATOR
1 HP
Part Number Voltage Ph Hz List Price OPGHXH5001B ...........115 /
208-230 ...... 1 ........60 .......... $1,025 OPGHXH5003B
...........208-230 / 460 ...... 3 ........60 .......... $1,063
OPGHXH5053B ................... 575 .............. 3 ........60
.......... $1,063
Part Number Voltage Ph Hz List Price OPGHXH1001B ...........115 /
208-230 ...... 1 ........60 .......... $1,149 OPGHXH1003B
...........208-230 / 460 ...... 3 ........60 .......... $1,184
OPGHXH1053B ................... 575 .............. 3 ........60
.......... $1,184
Part Number Voltage Ph Hz List Price OPGHXH7501B ...........115 /
208-230 ...... 1 ........60 .......... $1,084 OPGHXH7503B
...........208-230 / 460 ...... 3 ........60 .......... $1,121
OPGHXH7553B ................... 575 .............. 3 ........60
.......... $1,121
Part Number Voltage Ph Hz List Price OPGHXH3003BFC .......208-230 /
460 ...... 3 ........60 .......... $1,540 OPGHXH3053BFC
............... 575 .............. 3 ........60 ..........
$1,540
Part Number Description Adjust List Price 38176R.s
.......................Standard photoeye with adjustable bracket.
...........................................................................
Included No Photoeye ..................Monitored safety edge, or
constant contact close operation desired.
............................ Deduct $39.62 OPAKPE.s
....................... Impact protected commercial photoeye with
ability for conduit connection. ........................Add $55.86
OPAKPEN4GX.s ...............Nema 4 photoeyes on resilient mount
.................................................................................
Add $44.36 Safety Edge ....................See edge options in
accessories for more details.
Part Number Description Adjust List Price 276357
..........................#50, 32 Tooth, 1” Bore, 1/4” Keyway,
Standard for Rolling Door
....................................................... N/C For
sectional doors - see door speed chart (How to Order Section)
..................................................N/C To substitute
a different sprocket for either rolling or sectional
..........................................Call Factory
1. Maximum door weight, and not the square footage, is the critical
factor in selecting the proper operator. 2. Maximum door height:
24’, for over 24’ required contact factory. 3. For “Commercial
Steel Insulated” category, various “backer” options are available.
The chart above is based in all cases on the thickest backer
available. 4. “PU-FIP” stands for “polyurethane, foamed-in-place”.
If no notation is present, insulation is “polystyrene
laid-in-place”.
Notes:
Door Series
Commercial Steel Insulated & Non-Insulated Thermospan®
ThermoMark™ Aluminum
216 216 Ins. 220 220 Ins. 2415 2415 Ins. 2411 2411 Ins. 125 150 200
200-20 5150 5200 451 452
Flush Ribbed Insulated Insulated
24GA.
PU-FIP 2” 20GA. Ext.
PU-FIP Raised Panel 1.38”
1/4” or 1/2” Glass 1.38”
1/2 HP 1310 300 256 410 280 520 400 320 320 256 430 430 350 450 430
400 320
3/4 HP 1450 340 256 450 320 540 410 320 320 256 450 450 400 480 460
400 350
1 HP 1650 390 290 510 380 580 410 320 320 256 480 480 420 510 490
400 400
3 HP 3696 700 500 700 560 770 600 320 320 256 480 900 680 530 680
400 400
MAX DOOR SIZE (SQ*FT) - ROLLING
Door Series Steel Non-Insulated Steel Insulated Counter Doors
Grilles FireStar2”
Slat FireStar3” Slat FireStar3” Slat Insulated
Model Max Door Wt. (Lbs.)
16GA. 18GA. 20GA. 22GA. 24GA. 26GA. 18GA. 20GA. 22GA. Alum STL/ SST
Alum STL/
SST 20GA. 22GA. 16GA. 18GA. 20GA. 22GA. 20GA. 22GA.
1/2 HP 1310 250 277 277 333 360 360 194 194 222 126 126 360 280 210
270 128 144 166 220 120 128
3/4 HP 1450 283 350 350 442 494 N/A 232 232 283 126 126 490 350 N/A
N/A N/A N/A N/A N/A N/A N/A
1 HP 1650 318 420 420 548 636 N/A 244 244 303 N/A N/A 580 380 320
355 176 188 246 272 160 180
3 HP 3696 962 1035 1152 1152 1152 N/A 728 728 986 N/A N/A 982 982
576 576 342 390 576 576 300 324
½ HP ¾ HP
M O
D IF
IC AT
IO N
02 DC Disc Brake, Brake, Hoisted Operators $97.09
03 Manual Hoist for Model GCL-J $264.00
04 Side-Mount Trolley Standard-Duty $313.71
05 Side-Mount Trolley Heavy-Duty $402.00
06 Side-Mounted Dual Trolley Standard-Duty $601.00
07 Side-Mount Dual Trolley Heavy-Duty $690.00
08 Dual Trolley Standard-Duty $302.69
09 Dual Trolley Heavy-Duty $302.66
010 Center Mount Standard-Duty $216.74
011 Center Mount Heavy Duty, GCL-GH $230.25
Center Mount Heavy Duty, GCL-GH 3HP $256.98
OP TI
ON S
Emergency Egress, Flush 30’ $297.45
014 Emergency Egress, ADA Compliant, 15’ $317.34
Emergency Egress, ADA Compliant, 30’ $393.49
015 Hand Crank, GCL-GCX $107.00
016 Hand Crank, GCL-GH $190.00
017 Extended Limit Kit, GCL-GH $44.10
Extended Limit Kit, GCL-GH 3 HP $39.10
018 Commercial Photoeye $45.40
EN VI
RO NM
EN TA
L M
OD IF
IC AT
IO NS
026 NEMA 4/12 Watertight/Oiltight $876.16
027 NEMA 4X Corrosion-Resistant $1,196.51
028 NEMA 7/9 Hazardous Area Wall-Mount coming soon
GCL-OPTIONS
www.GenieCompany.com/commercial | 800.843.4084 31
Add “B” to the base operator P/N. 24VDC Disc Brake (From Factory)
......................................................................................
Add to Operator List Price: $90.51 Works with any voltage/phase
GCL-T/J
Kit P/N 111396.0001.s 24VDC Disc Brake (Field Installed) for ½ HP,
1Ø GCL-T/J
..........................................................................List
Price: $91.03
Kit P/N 111396.0002.s 24VDC Disc Brake (Field Installed) for ½ HP,
3Ø GCL-T/J
..........................................................................List
Price: $92.88
Works with models
DESCRIPTION
24VDC disc brake used on standard-duty hoist operators. This brake
will provide up to 45 inch pounds of torque at motor speed. Brake
is standard on ¾ and 1 HP models. May be ordered from factory on
the operator, or as a field installed kit.
Add “B” to the base operator P/N as shown in the P/N structure
guide at the beginning of the manual. 24VDC Disc Brake (From
Factory)
......................................................................................
Add to Operator List Price: $97.09 Works with ½ HP, 1Ø GCL-H
Kit P/N 111396.0004.s 24VDC Disc Brake (Field Installed) for ½ HP,
1Ø GCL-H
...........................................................................List
Price: $103.90
Kit P/N 111396.0005.s 24VDC Disc Brake (Field Installed) for ½ HP,
3Ø GCL-H
...........................................................................List
Price: $105.75
Works with models
DESCRIPTION
24VDC disc brake used on standard-duty non-hoist operators. This
brake will provide up to 45 inch pounds of torque at motor speed.
Brake is standard on ¾ and 1 HP models. May be ordered from factory
on the operator, or as a field installed kit.
GCL | OPTIONS
DESCRIPTION
Provides for the operator to be mounted on the side of the door and
coupled to a track assembly with a cross-header shaft. Includes
hoist for manual operation. This option is only available on 1 HP
operators. Must specify left or right hand when ordering.
Replace the “T” in the base GCL-H operator with “HT”. Side Mount
Trolley GCL-HT................. Add to Operator List Price: $313.71
Must be factory installed. Note: Upcharge for rails and trolley
chain on doors over 12’ will be applied.
03 – MANUAL HOIST ON STANDARD-DUTY JACKSHAFT
DESCRIPTION
Manual hoist addition to the GCL-J operator. Used on rolling doors
where both manual hoist and emergency egress operation are
required. Emergency egress kit must be ordered separately. For this
modification the model GCL-J must have a brake.
Replace the “J” in the base jackshaft operator P/N with “HJ”.
Manual Hoist on GCL-J ................................ Add to
Operator List Price: $264.00 Must be factory installed.
Works with models
INCLUDES
• Trolley chain – per door height
• Side mount trolley kit – OPAKSMT.s
• 1” shaft w/ ¼” keyway x ½ door width long
GCL | OPTIONS
Works with models
DESCRIPTION
Kit that transforms a GCL-GH operator (must be ordered separately)
into a side mount trolley. This option can be used with ½, ¾ and 1
HP GCL-GH operators.
OPAKSMTHX.S Side Mount Trolley Kit for GCL-GH
...................................................................................
List Price: $402.00 Kit is field installed. Note: Upcharge for
rails and trolley chain on doors over 12’ will be applied.
INCLUDES
• Trolley chain – per door height
• Side mount trolley kit – OPAKSMTHX.s
• 1” shaft with ¼” keyway x ½ door width
DESCRIPTION
Provides for the operator to be mounted on the side of the door and
coupled to two track assemblies with a cross-header shaft between
the track assemblies and from the tracks to the operator. Includes
hoist for manual operation. This option is only available on 1 HP
operators. Must specify left or right hand when ordering.
Replace the “T” in the base jackshaft operator P/N with “HT”.
Specify Dual Trolley Side-mount .......Add to Operator List Price:
$601.00 Must be factory installed. Note: Upcharge for rails and
trolley chain on doors over 12’ will be applied.
06 – SIDE-MOUNT WITH DUAL TROLLEY KIT – STANDARD-DUTY
INCLUDES
• 2 Trolley chains – per door height
• Side mount trolley kit – OPAKSMT.s
• Dual Trolley Kit – OPAKDT.S
• (2) 1” shafts with ¼” keyway x 1/3 door width
Works with models
34
DESCRIPTION
Kit that transforms a GCL-GH operator (must be ordered separately)
into a side mount dual trolley installation. This option can be
used with ½, ¾, and 1 HP GCL-GH operators. Recommended for standard
lift sectional doors 20’ and wider where a manual hoist is
required.
OPAKSMTHX.S and OPAKDTHX.S for GCL-GH
.........................................................................................
List Price: $690.00 Kit is field installed. Note: Upcharge for
rails and trolley chain on doors over 12’ will be applied.
DESCRIPTION
Kit provides dual trolley installations with GCL-T (ordered
separately) on doors 20’ and over. Dual trolley allows for
distributed lifting of very large doors. This reduces the strain on
the top section of the door. This kit works only with ¾ and 1 HP
GCL-T operators.
OPAKDT.S
.........................................................................................................................................
List Price: $302.69 Kit is field installed. Note: Upcharge for
rails and trolley chain on doors over 12’ will be applied.
07 – SIDE-MOUNT W/ DUAL TROLLEY KIT – HEAVY-DUTY
08 – DUAL TROLLEY KIT – STANDARD-DUTY
INCLUDES
• 2 Trolley chains – per door height
• Side mount trolley kit – OPAKSMTHX.s
• Dual Trolley Kit – OPAKDTHX.S
• (2) 1” shafts with ¼” keyway x 1/3 door width
INCLUDES
• 2 Trolley chains – per door height
• Dual Trolley Kit – OPAKDT.S
Works with models
DESCRIPTION
Kit provides dual trolley installations with GCL-GT (ordered
separately) on doors 20’ and over. Dual trolley allows for
distributed lifting of very large doors. This reduces the strain on
the top section of the door. This kit works with ½, ¾ and 1 HP
GCL-GT operators.
OPAKDTHX.S
.....................................................................................................................................
List Price: $302.69 Kit is field installed. Note: Upcharge for
rails and trolley chain on doors over 12’ will be applied.
Works with models
DESCRIPTION
This kit allows for a GCL-H operator to be center mounted and have
the hoist extended to the side of the door. Center mounting is
recommended on very large, over 20’ wide, shaft-driven
installations.
OPAKCMVGSX.S
................................................................................................................................
List Price: $216.74 Kit is field installed. Note: For easiest
mounting, motor should be up. This requires the opposite handing to
be ordered, i.e. order a LEFT hand operator for a right side of
door hand chain.
10 – CENTER MOUNT KIT – STANDARD-DUTY HOIST MODEL
09 – DUAL TROLLEY KIT – HEAVY-DUTY
INCLUDES
• 2 Trolley chains – per door height
• Dual Trolley Kit – OPAKDTHX.S
INCLUDES
Works with models
36
DESCRIPTION
This mounting kit allows for GCL-GH operators to be center mounted
and have the hoist extended to the side of the door. Center
mounting is recommended on 20’ wide, or wider shaft driven
installations.
OPAKCMGHX.S
..................................................................................................................................
List Price: $230.25 For ½, ¾, 1 HP GCL-GH Operators. Kit is field
installed.
OPMKCMVHX3HP.S
............................................................................................................................
List Price: $256.98 For 3 HP GCL-GH Operators. Kit is field
installed.
011 – CENTER MOUNT KIT – HEAVY-DUTY HOIST MODELS
012 – FRICTION CLUTCH – HEAVY-DUTY HOIST MODELS
DESCRIPTION
Provides an adjustable friction clutch that can be mounted to the
output shaft of GCL-GH ½, ¾ and 1 HP GCL-GH operators. Clutch needs
to be set just tighter than the torque needed to operator door.
Provides protection against door and operator damage in over torque
situations.
111817.0002
...............................................................
List Price: $176.39 For ½, ¾, 1 HP GCL-GH Operators. Kit is field
installed.
INCLUDES
• 1” hollow shaft approx. x ½ width of door.
Works with models
DESCRIPTION
Allows for emergency manual egress by pulling wall-mounted lever.
Flush, wall-mount emergency egress enclosure; includes a mechanical
cable to couple into operator. Door must be balanced so that it is
able to open at least half way when released.
110935.0001.S
.............................................................List
Price: $169.76 15’ Cable Length. For ½ GCL-MJ, and ½, ¾, 1 HP
GCL-J/HJ Operators. Kit is field installed.
110935.0002.S
.............................................................List
Price: $297.45 30’ Cable Length. For ½, ¾, 1 HP GCL-J/HJ Operators.
Kit is field installed.
Works with models
DESCRIPTION
Allows for ADA-compliant emergency manual egress by pulling
wall-mounted lever. Flush wall mount emergency egress enclosure;
includes a mechanical cable to couple into operator. Door must be
balanced so that it is able to open at least half way when
released.
111053.0001.S
.............................................................List
Price: $317.34 15’ Cable Length. ADA Emergency Egress for ½ GCL-MJ,
and ½, ¾, 1 HP GCL-J/HJ Operators. Kit is field installed.
111053.0002.S
.............................................................List
Price: $393.49 30’ Cable Length. ADA Emergency Egress for ½, ¾, 1
HP GCL-J/HJ Operators. Kit is field installed.
014 – EMERGENCY EGRESS – ADA-COMPLIANT
Works with models
DESCRIPTION
Provides floor level hand crank option for manual operation of the
GCL-GCX counter door operator. This hand crank is not available on
fire door versions of the GCL-GCX.
112073.0001.S .................................................List
Price: $107.00 Hand Crank GCL-GCX, counter door versions only. Kit
is field installed.
DESCRIPTION
Field installed hand crank option for GCL-GH ½, ¾, and 1 HP
operators.
OPAKHNDCRKHX.S
.........................................................List
Price: $190.00 Hand Crank for GCL-GH. Kit is field installed.
OPAKPE.S ........................................................
List Price: $95.48 Kit is field installed.
018 – COMMERCIAL PHOTOEYE SYSTEM
DESCRIPTION
Allows for extended run time on larger doors. This kit includes an
additional limit idler shaft that is used to make a two-stage
reduction between the limit and operator output shaft.
OPAKLEHX.S ....................................................
List Price: $44.10 ½, ¾, 1 HP GCL-GH operators. Kit is field
installed.
OPAKLEHX3HP.S ............................................... List
Price: $39.10 3 HP GCL-GH operators. Kit is field installed.
Works with models
Timed Close - Adjustable from 1 second to 5 minutes.
Pre-close Warning Output Contacts - Adjustable from 2 to 10 seconds
prior to close.
Auxiliary Open Input - Provides additional open input that can be
configured to start timer.
N-C Normally Closed Safety Input - Non-monitored N-C edge or
photoeye input.
Monitored Edge Input - Provides contacts to connect 2-wire “DC”
monitored edges.
Plug & Play - Plugs directly into control board expansion port,
and can daisy chain with additional expansion modules.
Set-Up - LCD display is used to adjust settings and selection of
inputs to start timer.
OPABTCGX.S
..................................................................................................................................
List Price: $94.23 Kit is field installed.
DESCRIPTION
Auxiliary Output Module
Up Limit Output - Contacts activate when door reaches up limit. N-O
and N-C contacts included. 2 sets of single-pole, double-throw
(SPDT) contacts.
Down Limit Output - Contacts activate when door reaches down limit.
N-O and N-C contacts included. 2 sets of single-pole, double-throw
(SPDT) contacts.
ADA Output - Contacts configurable via LCD to activate when door is
moving open, closed, or both open and closed. 1 set of single-pole,
double-throw (SPDT) contacts.
Plug and Play - Plugs directly into control board expansion port,
and can daisy chain with additional expansion modules.
Lamp Output - Contacts activate when door is set into movement and
has a five-minute delay before turning off. 1 set of single-pole,
double-throw (SPDT) contacts.
Set-Up - LCD display is used to adjust ADA output.
OPABIOGX.S
...................................................................................................................................
List Price: $99.89 Kit is field installed.
Works with models
DESCRIPTION
Replaces the standard open drip proof with a TENV motor. This
modification affects the motor only. TENV models are not acceptable
for damp or wet environments.
Add “NV” to the end of the GCL P/N
................................................................................
Add to Operator List Price: $55.47 Not available on 1 HP, 1 Phase
operators. This is a factory-only modification. Note: The TENV
option is not UL325 listed.
022 – TOTALLY ENCLOSED NON-VENTILATED (TENV) MOTOR
021 – TOTALLY ENCLOSED FAN-COOLED (TEFC) MOTOR
DESCRIPTION
Replaces the standard open drip proof with a TEFC motor. Note that
the 3 HP GCL-GH operators come standard with TEFC. This
modification only changes the motor when needed per specification.
TEFC models are not acceptable for damp or wet environments.
Add “FC” to the end of the GCL P/N
..............................................................................
Add to Operator List Price: $118.86 This is a factory-only
modification. Note: The TENV option is not UL325 listed.
GCL | OPTIONS
DESCRIPTION
Modification allows the operator to be used with 220V, 1Ø, 50Hz
power for international use. The standard motor is replaced by a
motor rated for 50Hz use. This option is only available on ½, 1 and
3 HP models with brakes.
Change voltage/phase to “24” in the GCL P/N
............................................................... Add
to Operator List Price: $106.56 Not available on ¾ HP operators. 1
HP 1 phase and 3 HP 3 phase - add “FC” to the end of the part
number, all other models - add “NV” to the end of the part number.
This is a factory-only modification. Note: This option is not UL325
listed.
DESCRIPTION
Modification allows the operator to be used with 220V, 3Ø, 50Hz
power for international use. The standard motor is replaced by a
motor rated for 50Hz use. This option is only available on ½, 1 and
3 HP models with brakes.
Change voltage/phase to “26” in the GCL P/N
............................................................... Add
to Operator List Price: $106.56 Not available on ¾ HP operators. 1
HP 1 phase and 3 HP 3 phase - add “FC” to the end of the part
number, all other models - add “NV” to the end of the part number.
This is a factory-only modification. Note: This option is not UL325
listed.
GCL | OPTIONS
DESCRIPTION
Modification allows the operator to be used in damp environments.
Provides protection against water spray. The unit is provided with
a NEMA 4 Open/Close/Stop push-button standard. This option is only
available on ½, and 1 HP models with brakes. Available with 50Hz
models.
Add “N4” to the end of the GCL P/N
..............................................................................
Add to Operator List Price: $816.16 This is a factory-only
modification. Note: This option is not UL325 listed.
026 – NEMA 4
DESCRIPTION
Modification allows the operator to be used with 380-415, 3Ø, 50Hz
power for international use. The standard motor is replaced by a
motor rated for 50Hz use. This option is only available on ½, 1,
and 3 HP models with brakes.
Change voltage/phase to “46” in the GCL P/N
............................................................... Add
to Operator List Price: $106.56 Not available on ¾ HP operators. 1
HP 1 phase and 3 HP 3 phase - add “FC” to the end of the part
number, all other models - add “NV” to the end of the part number
This is a factory only modification. Note: This option is not UL325
listed.
Works with models
DESCRIPTION
Modification allows the operator to be used in damp corrosive
environments. The unit is provided with a NEMA 4x Open/Close/Stop
push-button standard. This option is only available on ½, ¾ and 1
HP Standard-Duty models with brakes, and ½, 1, and 3 HP Heavy-Duty
models.
Add “N4X” to the end of the GCL P/N
..........................................................................
Add to Operator List Price: $1196.51 This is a factory-only
modification. Note: This option is not UL325 listed.
Works with models
Receivers
GenieMaster™ Remote
GIDFX1.S ............. $28.70 Single Button
111397.0001.S……$37.67 315Mhz Internal
Intellicode® I - Internal
37344R .....................................$34.63
Three Button Genie Master Remote will operate Intellicode I®,
Intellicode II®, 9 switch binary, 12 switch binary and 9 switch
trinary receivers.
GIDFX4.S ............. $38.89 Four Button
GIDFX2.S ............ $34.75 Two Button
Intellicode® I - External
GIDFX5.S ............ $38.34 Open/Close/Stop
3 wire fixed code 9 switch trinary
For use with GenieMaster™ remote
P/N 37344R
TRANSMITTERS - INTELLICODE® I
GCL - ACCESSORIES RADIO CONTROLS: TRANSMITTERS, RECEIVERS AND
ANTENNA
108035.0008.S .........................$14.56 20’ of coax with
antenna mount and ‘F’ connected
www.GenieCompany.com/commercial | 800.843.4084 47
Single-Button Control
Single-button controls for wiring into single-button input on
control board. WARNING: Must use another control station for STOP
button.
PUSH BUTTONS
Two-Button Controls
Can be wired into open and close inputs. Open button press will
over-ride closing door and open to up limit in momentary operation.
WARNING: Must use another control station for STOP button.
110309.0001.S…$12.42 109993.0001.S…$34.18
108816.0001.S…$12.84 110310.0001.S…$34.84
106647.0001.S…$12.84 110355.0001.S…$36.32
110317.0001.S…$59.84
075211.0000.S…$36.32
Three-Button with Key Controls
Open/close/stop buttons provide control of door in any position.
Key will allow lockout of control station.
110319.0001.S…$183.55
Single-Button Control
Single-button controls for wiring into single-button input on
control board. WARNING: Must use another control station for STOP
button.
PUSH BUTTONS - SURFACE MOUNT NEMA 4 RATED, UNLESS INDICATED
4X
Surface Mount Surface Mount Key Lockout
Two-Button Controls
Can be wired into open and close inputs. Open button press will
over-ride closing door and open to up limit in momentary operation.
WARNING: Must use another control station for STOP button.
110311.0001.S…$36.32 Non-Metallic
110322.0001.S…$70.54 Non-Metallic
110312.0001.S…$49.16 Non-Metallic
076779.0001.S…$387.72 Metallic
Mount with on/off keyswitch
Three-Button Controls
Open/Close/Stop buttons provide control of door in any position.
Models with key lockout will prevent operation from button
station.
075394.0000.S…$70.13 Non-Metallic
110314.0001.S…$96.18 Non-Metallic, Surface Mount
with on/off keyswitch
with on/off keyswitch
110320.0001.S…$150.68 Flush Mount
110334.0001.S…$197.33 Non-Metallic, NEMA 4X, Surface Mount
with on/off keyswitch
www.GenieCompany.com/commercial | 800.843.4084 49
Internal Mounted Two-Position Key Switches
Open/Close key switches Center return on models indicated. Tamper
proof models require the key to be used for cover removal. WARNING:
Must use another control station for STOP button.
INTERIOR KEY SWITCHES
110332.0001.S…$91.89 Surface Mount
110329.0001.S…$85.48 Flush Mount
with Stop Button
with Stop Button
External Mounted Two-Position Key Switches
Open/Close key switches Center return on models indicated. Tamper
proof models require the key to be used for cover removal. NEMA 4
rated for outdoor use. WARNING: Must use another control station
for STOP button.
EXTERIOR KEY SWITCHES
Switch Cover
with Stop Button
with Stop Button
Pull Switches
Single and double-pole pull switches must be wired into either
single-button input or open input. Cannot be used to only close
door. WARNING: For single and double-pole switches, another control
station for STOP button must be used.
PULL SWITCHES
109171.0001.S…$38.47 NEMA 4, Surface Mount
109171.0002.S…$47.00 NEMA 4, Surface Mount
075260.0000.S…$206.78 NEMA 1, Hang Mount
110323.0001.S…$58.80 NEMA 4, Surface Mount,
Rotating / Pivoting
Single Pole
Interlock Switches
Must be used to prevent motor operation when a door is locked, or a
pass door is open.
DOOR INTERLOCK SWITCHES
075396.0000.S…$308.99 NEMA 4
Paddle
Flush Mount
Signal Devices
Devices can be relay-connected to either pre-close warning contacts
on timer to close expansion board, or output contacts found on
auxiliary expansion module.
VISUAL SIGNAL DEVICES
108478.0001.S…$127.67 115VAC, Vapor Resistant
110347.000X.S…$213.00 X: 1 Red, 2 Green, 3 Amber
115VAC, NEMA 4X
lamp into flasher.
108233.000X.S…$134.64 X: 1 Red, 2 Green, 3 Amber
115VAC, NEMA 4X
Weather Proof
Optional Mounting Kit 110350.0001.S…$166.02
52
Loop Detectors
Requires wire loop to be imbedded in drive surface. 2-wire output
can be connected to open input, or auxiliary open input on timer to
close expansion module.
LOOP DETECTORS 115VAC 24VAC LOOP SEALANT
107430.0001.S…$418.91 Comes with harness
540052.0002.S…$395.18 Comes with harness
Black: 110341.0001.S…$38.26
Gray: 110341.0002.S…$38.26
107264.0001.S…$182.57 180’ included
Motion Detectors
Customizable for uni- or bi-directional sensing. Able to
discriminate between pedestrian and vehicular traffic. NEMA 4
enclosure. Setup via remote control from ground level.
MOTION DETECTORS TREADLE SWITCH
23’ tall doors.
Card Reader
For complete system, the card reader, program cartridge and
readable cards are needed.
ACCESS CONTROLS
not included.
to 100 codes, no light included.
110345.0001.S…$56.42 For card reader 110344
Readable Cards
NO IMAGE AVAILABLE
NO IMAGE AVAILABLE
www.GenieCompany.com/commercial | 800.843.4084 53
PHOTOEYES GCL | ACCESSORIES
DEVICES APPROVED FOR UL325-2010 MOMENTARY CLOSE OPERATION
Unless an approved monitored entrapment device is installed the
operator will be restricted to constant contact closing of the
door.
MONITORED PHOTOEYES
adjustable bracket
photoeye with ability for conduit connection
OPAKPEN4GX.S…$83.98 Nema 4 resilient mount with
50-foot wire each eye
Non-Monitored Photoeyes
Can only be used for door activation, or for secondary entrapment
in addition to a monitored entrapment device, i.e. a monitored
photoeye or monitored safety edge.
107322.0005.S…$170.98 Thru-Beam, 24VDC
and Brackets
115VAC
54
Monitored Safety Edges
DEVICES APPROVED FOR UL325-2010 MOMENTARY CLOSE OPERATION
Unless an approved monitored entrapment device is installed, the
operator will be restricted to constant contact closing of the
door.
348919 ME-123-2U-T3
Pricing - Contact Factory
MONITORED SAFETY EDGES
348533 ME-112DC-2L, LH
348534 ME-112DC-2R, RH
Pricing - Contact Factory
angle bottom bars. Pricing - Contact Factory
347392 ME110-2L-T3, Left
347391 ME110-2R-T3, Right
2-wire “DC” edge for sectional doors *** rolling grilles and
counter doors. Pricing - Contact Factory
347393 MT20175Y-2U-T3 2-wire “DC” edge for rolling steel
doors.
Pricing - Contact Factory
Non-Monitored Safety Edges
Can only be used for secondary entrapment in addition to a
monitored entrapment photoeye.
NON - MONITORED SAFETY EDGES
Pricing - Contact Factory
298130 ME-112-2R, RH
Pricing - Contact Factory
** TS150/TM5150/ TM5155/2411/2415/220/116
Edge Mounting Channels
298126 ME123-C
Pricing - Contact Factory
Non-Monitored Safety Edges
Can only be used for secondary entrapment in addition to a mon