COMMERCIAL BATT INSULATION

F A C T SAT A GLANCE

• Cost-effective

• Easy to cutand install

• Energy-efficient

• Available unfaced,kraft faced, foil faced,or flame-rated (FSK)foil faced

• Recovers quicklyto full thickness todeliver full R-value

• Energy Star product

C O M M E R C I A L B A T T I N S U L A T I O N

D E S C R I P T I O N

Knauf’s Commercial Batts are madefrom highly resilient, inorganic glassfibers bonded by thermosetting resin.The products are available unfaced orwith kraft, foil or flame-rated FSK-25(Foil-Scrim-Kraft) foil facings.

A P P L I C A T I O N

Knauf’s Commercial Batts arecost-effective thermal and acousticalbarriers for energy-efficientconstruction. Their consistentquality, low dust and clean-cuttingresilient fibers make fabrication easyand installation fast. The productscan be used in wood or metal frameconstruction for exterior andpartition walls, floors, crawl spacesand a variety of ceiling applications.

Knauf QuietTherm® Insulation’sexcellent acoustical properties reducesound transmission when properlyinstalled in partition walls, ceilingsand floor assemblies. QuietThermbatts can improve STC ratings inwood stud construction by 3 to 5points and metal stud constructionby 8 to 10 points, depending on thecomplexity of the wall configurationand layers of insulation.

High Density Batts deliver greaterR-value in less space for applicationswhere optimal thermal performanceis required in limited space.

FEATURES AND BENEFITS

Thermally Efficient

• Excellent insulating value.

Acoustical Barrier

• Reduces airborne soundtransmission, significantlyimproving STC ratings of wallconfigurations.

Installation

• Extra-wide stapling flange forfaster, easier installation.

• Durable facing resists tears andis marked in one-foot increments.

• Low dust and friendly fibersfor easier handling andincreased productivity.

S P E C I F I C A T I O NC O M P L I A N C E

• ASTM C 665*; Type I, Class A(unfaced); Type II, Class C (kraftfaced); Type III, Class A (FSK-25

foil faced); Type III, Class B(foil faced)

• California Energy Commission

• Dade County, Florida

• MEA #498-90-M

• State of Minnesota

*Federal Specification HH-I-521F has been

canceled and replaced by ASTM C 665.

T E C H N I C A L D A T A

Surface Burning Characteristics

• Unfaced and FSK-25 foil facedproducts do not exceed 25 FlameSpread, 50 Smoke Developedwhen tested in accordancewith ASTM E 84.

Facing Permeance• Kraft faced products have a

moisture permeance of 1.0 or less.

• FSK-25 foil faced products haveratings of .04.

• Foil faced products have ratingsof .05.

Formaldehyde Off-Gassing• Tested and shown to be below

OSHA limits.

• Diminishes to immeasurable levelswithin a short time frame.

Water Vapor Sorption(ASTM c 1104)• 5% maximum by weight.

Corrosion (ASTM C 665)• No greater than sterile cotton.

Microbial Growth (ASTM C 1338)• Does not support microbial growth.

Non-Combustibility (ASTM E 136)• No temperature rise above 86°F

(30°C). (Unfaced and FSK).

P A C K A G I N G

• Our packages feature completeinstallation instructions and a highlyvisible color coding system whichfollows industry standards, makingKnauf products easy to select.

• Knauf packages are lightweight,stack without slipping and fiteasily under floors and throughscuttle holes.

• Strong, white poly bags offerexcellent protection from abuse,dust and moisture.

• Knauf’s unitized packaging(four batt bags in one banded pack-age) saves storage space and makesloading, unloading and job sitedelivery easier.


• Versatile andlightweight

• Low-cost installation

• Reduces airbornesound transmission

• Easy to field-fabricate

• More flexible anddurable than rigidfoam board

I N S U L A T I O N B O A R D

D E S C R I P T I O N

Knauf Insulation Board is a thermaland acoustical insulation productmade from inorganic glass fiberspreformed into boards bonded bya thermosetting resin. It is availableplain, with a factory-applied FSKfacing or with a factory-applied ASJ(all-service jacket) facing.


Knauf Insulation Board is a versatileproduct for use as both thermal andacoustical insulation on metal andmasonry walls, wall and roof panelsystems, curtain wall assemblies andcavity walls.

F E A T U R E S A N D B E N E F I T S

Energy Conservation• Excellent thermal efficiency results

in lower operating costs.

Sound Absorption• Cost-effective acoustical treatment.

Low-Cost Installation• Lightweight, easy to handle and

fabricate.• Lower-cost field installation and

lower applied costs.

Attractive Appearance• Both FSK and ASJ vapor-retardant

facings provide an aestheticappearance.

S P E C I F I C A T I O NC O M P L I A N C E

In U.S.:• ASTM C 612

- Type IA (1.6, 2.25, 3.0, 4.25,6.0 PCF)(26,36,48,68,96 kg/m³)

- Type IB (3.0, 4.25, 6.0 PCF)(48, 68, 96 kgim³)

• ASTM C 795• ASTM C 1136 (facings)

- Type I, II, III, IV (ASJ)- Type II, IV (FSK)

• HH-B-100B; Type I (ASJ facing),Type II (FSK facing)

• HH-I-558B- Form A, Class 1 (1.6, 2.25, 3.0,

4.25, 6.0 PCF)(26, 36, 48, 68,96 kg/m³)

- Form A, Class 2 (2.25, 3.0,4.25, 6.0 PCF)(36, 48, 68,96 kg/m³)

• MIL-I-24244C

• NFPA 90A and 90B• NRC Reg. Guide 1.36

In Canada:• CAN 4-S102

• CGSB 51-GP-10M• CGSB 51-GP-52M (facings)


Surface Burning Characteristics(UL Classified)

• Does not exceed 25 Flame Spread,50 Smoke Developed when testedin accordance with ASTM E 84,CAN 4-S102, NFPA 90A and90B, NFPA 255 and UL 723.

Temperature Range (ASTM C 411)

• Operating temperatures from-20°F to 450°F (-29°C to 232°C).

Corrosiveness (ASTM C 665)• Will not accelerate corrosion of

aluminum, steel or copper.

• Passes MIL-I-24244 C for stresscorrosion.

Puncture Resistance(TAPPl Test TB03) (Beach Units)• FSK facing: 25

• ASJ facing: 50

Water Vapor Transmission(ASTM E 96, Procedure A)• Both FSK and ASJ vapor

retarders have a maximum vaportransmission rate of .02 perms.

Water Vapor Sorption(ASTM C 1104)• Less than 5% by weight.

Shrinkage (ASTM C 356)• Less than 0.3% linear shrinkage.

P A C K A G I N G

• Unfaced Knauf Fiber GlassInsulation Board is packaged instrong, white poly sleeves thatoffer excellent protection fromabuse, dust and moisture. Facedproducts are available in cartonsand sleeves.

• Knauf packages are lightweight,stack without slipping and areunitized for easy handling andstorage.

B L A C K


• Surface resists

damage duringinstallation

• Reduces airborne

sound transmission

• Use when a black

surface is desired

• Thermally efficient

• Low-cost visual

barrier

A C O U S T I C A LI N S U L A T I O N

WALL ANDCEILING LINER MD E S C R I P T I O N

Knauf Wall and Ceiling Liner Mis a black flexible fiber glass blanketwith a black mat facing adheredto one surface. It provides thermaland acoustical insulation and a visualbarrier. Its smooth, tough surfaceresists damage during installation.


Knauf Wall and Ceiling Liner Mis designed for use as an acousticaland visual barrier for walls andceilings where a black surface isrequired. It is primarily used intheaters, sound studios, publicconcourses and other areas whereacoustical treatment is needed.It is intended to be mechanicallyfastened to walls or suspendedabove linear metal and metal panceiling systems, to serve as botha visual and acoustical treatment.It also can be covered with fabricor draping.


Acoustical Barrier

• Reduces airborne soundtransmission.

• Significantly improves STCratings of wall configurations.


Surface Burning Characteristics(UL Classified)

• Does not exceed 25 Flame Spread,50 Smoke Developed when testedin accordance with ASTM E 84and UL 723.

Service Temperature (ASTM C 411)

• Maximum of 250°F (121°C).

Microbial Growth(ASTM C 1338, G 21, G 22)

• Does not support microbialgrowth.

Water Vapor Sorption(ASTM C 1104)

• Less than 3% by weight.

Air Velocity (ASTM C 1071)

• Maximum 6000 fpm(1829 mpm).

P A C K A G I N G

• Knauf Wall and Ceiling Liner Mis packaged in a strong, whitepoly sleeve that offers excellentprotection from abuse, dustand moisture.

BLACK ACOUSTICALBOARDD E S C R I P T I O N

Knauf Black Acoustical Board is aheavy density fiber glass board insu-lation made from inorganic glassfibers bonded by a thermosettingresin. The base board is amber witha black polymer top layer of fiberglass, and a black overspray appliedto provide a smooth, tough finish.


Knauf Black Acoustical Board isdesigned for use as acoustical insula-tion and/or a visual barrier on wallsand ceilings, where system designrequires a rigid product and whereadditional strength and abuseresistance are required. The blacksurface provides a visual barrier

with an aesthetic appearance, inboth wall and ceiling applications.The product is typically used whereframing members are not present.

Service Temperature (ASTM C 411)• Maximum 250°F (121°C).


Microbial Growth(ASTM C 1338, G 21, G 22)• Does not support microbial

growth.

Acoustical Barrier• Reduces airborne sound

transmission.

• Significantly improves STCratings of wall configurations.

Water Vapor Sorption(ASTM C 1104)• Less than 3% by weight.

Air Velocity (ASTM C 1071)• Maximum 4000 fpm (1219 mpm).

T E C H N I C A L D A T A P A C K A G I N G

Surface Burning Characteristics(UL/ULC Listed)• Does not exceed 25 Flame Spread,

50 Smoke Developed when testedin accordance with ASTM E 84,CAN 4-S102, NFPA 255 andUL 723.

• Knauf Fiber Glass BlackAcoustical Insulation is packagedin cartons that offer excellentprotection from abuse, dustand moisture.

• Cartons are unitized for easyhandling and storage.

Knauf Fiber Glass GmbH

One Knauf DriveShelbyville, IN 46176(317) 398-4434(800) 825-4434Fax: (317) 398-3675www.knauffiberglass.com

Knauf has regional officesthroughout the U.S. andCanada. For the numberof the nearest office,call (800) 825-4434.

KNAUF: PRESERVING OUR WORLD’S ENERGY RESOURCESAt Knauf, we manufacture a wide variety of products that serve a common goal: helping to makethe most of our planet’s energy resources. A family-owned global company, we understand and arecommitted to high standards in quality, performance and environmental responsibility. Every stepwe take today toward energy conservation helps ensure better lives for generations to come.

SHIPPING POLICYKnauf Fiber Glass reserves the right to ship only in full cars, trucks and units. Because ofvariances in vehiclesizes, a variable item must be specified. Service on less than full vehicle orders can be provided. Consult yourKnauf distributor or representative for details.

LIMITED ONE-YEAR WARRANTYKnauf Fiber Glass warrants that all goods furnished are free from defect in workmanship and material for oneyear. Knauf shall not be liable for any incidental or consequential damages under any circumstances.

EASY ACCESS FOR FAST ANSWERSIf you ever need help resolving a problem, we’ll give it top priority. For your convenience, we’ve provided severalways for you to contact us and get the information or help you need, quickly.

THE KNAUF FACTS MACHINE SM

1-800-200-0802

From product data sheets and MSDS pages to frequently asked questions about insulation, you can access theinformation you need 24 hours a day from The Knauf Facts Machine.

WORLD WIDE WEBwww.knauffiberglass.com

If you prefer the convenience of on-line access, you can tap into product, specification and applicationinformation, as well as insights into industry trends and news of value to your daily business operations. You canalso easily connect to other related Web sites.

NOTESKnauf Fiber Glass complies with ISO 9002 in the prevention, detection and correctionof problems in production and service areas.

The descriptions of chemical and physical properties of Knauf products listed in this catalogrepresent typical average values determined in accordance with accepted test methods. The datais subject to normal manufacturing and testing variations, and is subject to change without notice.

References to numerical flame spread ratings are not intended to reflect hazards presented by theseor any other materials under actual fire conditions.

Check with your Knauf regional office to ensure that the information in this catalog is the mostcurrent available.

BI-CFL-I 9/02 © 2002 Knauf Fiber Glass

Documents

COMMERCIAL BATT INSULATION