Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
8/16/2018
Copyright © 2018 American Wood Council1
Code Compliant Fire-Resistance Design for Wood Construction(BCD220-V2)
Michelle Kam-Biron, PE, SE, SECBSenior Director, EducationAmerican Wood Council
E n t e r P r e s e n t a t i o n T i t l e H e r e 2
“The Wood Products Council” is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES), Provider #G516.Credit(s) earned on completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
This course is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.____________________________Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation.
8/16/2018
Copyright © 2018 American Wood Council2
E n t e r P r e s e n t a t i o n T i t l e H e r e 3
COURSE DESCRIPTION
Determining the proper code application for fire resistant wood frame assemblies and exposed wood structural members can be challenging and is often further complicated with increases in a project’s size and scale. In a building environment where the ability to maximize height and area is key to cost effectiveness, designers must understand the gamut of fire protection considerations applicable to wood structures. This presentation will include code requirements, compliance options and nuances related to assembly selection for required fire resistance-rated floor/ceilings and roof/ceilings, interior and exterior walls, fire barriers, fire partitions, and fire walls. Topics will also include distinctions between fire-resistive elements for separation vs. type of construction.
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 44
LEARNING OBJECTIVESUpon completion, participants will be better able to:
Apply approved methods and alternatives for establishing the fire resistance of wood building elements.
Discuss the differences in the various requirements for interior and exterior walls, fire walls, fire barriers, and fire partitions, considering performance expectations, code requirements, and appropriate application.
Understand the paths to achieving code-compliant, fire resistance-rated wood frame assemblies and exposed wood members as outlined by the 2015 IBC.
Recognize important nuances in the various methods for demonstrating fire resistance including: tested assemblies, prescriptive designs, calculations, and engineering analysis.
1 3
2 4
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council3
E n t e r P r e s e n t a t i o n T i t l e H e r e 5
ABOUT AWCCodes and StandardsGreen BuildingManufacturing Environmental RegulationAdvocacy and Public Policy
E n t e r P r e s e n t a t i o n T i t l e H e r e 6
CODE ASSISTANCE – AWC FIELD STAFF
Dave TyreeSouth Central
DennisRichardson
707-538-2786
Jim SmithMidwest
[email protected]; 608-635-6635
Matt HunterNortheast
[email protected];484-353-2509
Sam FrancisNational Director
[email protected]; 610-869-4774
Paul CoatsSoutheast
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council4
E n t e r P r e s e n t a t i o n T i t l e H e r e 7
Education Resourceswww.awc.org/education
In-Person SeminarsMonthly Webinars
eCoursesCEUs Available
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 8
Education Resourceswww.awc.org
Education Tab
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council5
E n t e r P r e s e n t a t i o n T i t l e H e r e 9
• Outline – principles of fire resistance design1. Establish the minimum construction type2. Know the reason for the fire resistance3. Know the options for establishing fire resistance
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 0
INTRODUCTION
• The IBC:• Controls building size• Regulates types of materials• Stipulates fire resistance
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council6
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 1
INTRODUCTION
• Building size is determined by:• Tabular values• Factors allowing
increases• Frontage• Sprinkler systems• Special Provisions (IBC
510)Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 2
INTRODUCTION
• Building size is determined by:• Tabular values• Factors allowing
increases• Frontage• Sprinkler systems• Special Provisions (IBC
510)Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council7
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 3
INTRODUCTION
• Tabular values are based on:• Use of building (occupancy)• Type of construction• Existence of NFPA 13 sprinkler system
Fire-Resistant Design for Wood Construction
p. 8
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 4
INTRODUCTION
• Tabular values are based on:• Use of building (occupancy)• Type of construction• Existence of sprinkler system
Fire-Resistant Design for Wood Construction
p. 8
8/16/2018
Copyright © 2018 American Wood Council8
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 5
INTRODUCTION
• Occupancy will determine:• Number of occupants• Capability of occupants• Fuel load
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 6
INTRODUCTION
Fire-Resistant Design for Wood Construction
• Concept Fire and Smoke Protection include:• Structural fire-
resistance• Limitation of Fire
Spread• Protection of Exitways• Radiant Heat Exposure • Restriction of Smoke
Movement
8/16/2018
Copyright © 2018 American Wood Council9
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 7
First principle of fire resistance:
Establish the minimumrequired construction type.
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 8
FIRST – MINIMUM CONSTRUCTION TYPE
�� ���������� ����� �� �������������
����������������� ���!� �������������
Fire-Resistant Design for Wood Construction
p. 8
8/16/2018
Copyright © 2018 American Wood Council10
E n t e r P r e s e n t a t i o n T i t l e H e r e 1 9
FIRST – MINIMUM CONSTRUCTION TYPE
Fire-Resistant Design for Wood Construction
p. 8
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 0
FIRST – MINIMUM CONSTRUCTION TYPE
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council11
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 1
FIRST – MINIMUM CONSTRUCTION TYPE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 2
FIRST – MINIMUM CONSTRUCTION TYPE
Fire-Resistant Design for Wood Construction
p. 37
8/16/2018
Copyright © 2018 American Wood Council12
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 3
FIRST – MINIMUM CONSTRUCTION TYPE
Fire-Resistant Design for Wood Construction
p. 37
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 4
FIRST – MINIMUM CONSTRUCTION TYPE
• The minimum construction type:• Can be independent of
materials chosen• Allows greatest
flexibility for materials use
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council13
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 5
FIRST – MINIMUM CONSTRUCTION TYPE
• The minimum construction type:• Should take into
account the final size of building with all future expansions in mind
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 6
Second principle of fire resistance:
Know the reason for the fire resistance.
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council14
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 7
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Building elements (walls, floors, roofs) rated per construction type (704):• Have general protection requirements in
704• Do not require opening/penetration
protection• Have ratings based on Table 601
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 8
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council15
E n t e r P r e s e n t a t i o n T i t l e H e r e 2 9
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Exterior walls (705):• Have unique structural, continuity, and
opening/penetration protection requirements
• Have material requirements based on construction type
• Have ratings based on proximity to lot lines• Required to be rated for exposure to both
sides of the wall only when FSD <10 ft. (otherwise interior side of wall is the exposed side for testing)
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 0
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
FRR
FRR
8/16/2018
Copyright © 2018 American Wood Council16
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 1
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 2
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
Bldg. 2
lot l
ine
8/16/2018
Copyright © 2018 American Wood Council17
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 3
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Fire walls (706):• Define separate buildings• Have unique structural, continuity, and
opening/penetration protection requirements
• Have materials requirements based on type of construction (Type V may be wood)
• Have ratings based on occupancy
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 4
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Fire barriers (707):• Create fire resistant separations• Have unique continuity and
opening/penetration protection requirements
• May have any materials permitted by the construction type
• Have ratings based on function• shaft enclosures, exit enclosures, occupancy
separations, hazardous material control areas, fire areas, atrium protection, and others
8/16/2018
Copyright © 2018 American Wood Council18
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 5
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 6
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Fire partitions (708):• Create fire resistant separations• Have unique continuity and
opening/penetration protection requirements
• May have any materials permitted by the construction type
• Have ratings based on function and sprinkler protection
• Dwelling unit separation, tenant space separation, corridor walls, elevator lobby separation
8/16/2018
Copyright © 2018 American Wood Council19
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 7
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Horizontal assemblies (711):• Have unique continuity and
opening/penetration protection requirements
• Have requirements for supporting construction
• Have ratings based on function
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 8
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Penetrations protection (714)
• Openings protection (716)
8/16/2018
Copyright © 2018 American Wood Council20
E n t e r P r e s e n t a t i o n T i t l e H e r e 3 9
SECOND – REASON FOR THE FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 0
SECOND – REASON FOR FIRE RESISTANCE
8/16/2018
Copyright © 2018 American Wood Council21
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 1
SECOND – REASON FOR FIRE RESISTANCE
IBC 704.2 and 704.3 No additional fireproofing required for the column
in the assembly
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 2
Third principle of fire resistance:
Know your options for establishing fire resistance.
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council22
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 3
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Methods for establishing fire resistance (703):1. Tested fire assembly (ASTM E119 or UL 263)2. Fire-resistance designs documented in approved
sources3. Prescriptive assemblies using fire-resistance rated
designs in Section 7214. Calculation of fire-resistance per Section 7225. Engineering analysis based on a comparison of
building element, component or assembly designs that have been tested
6. Alternative protection methods per Section 104.117. Fire-resistance designs certified by an approved
agency
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 4
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Tested assembly:• ASTM E119/UL
263 test• May be listed in
fire resistance directories
• Approval may be based on listing or the test report
8/16/2018
Copyright © 2018 American Wood Council23
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 5
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Documentation in approved source:• AWC DCA 3 is
one example• Fire-Resistive
Wood Wall and Floor/Ceiling Assemblies
• ASTM E119 or UL 263
• NFPA 251
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 6
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council24
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 7
SECOND – REASON FOR THE FIRE RESISTANCE
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 8
SECOND – REASON FOR THE FIRE RESISTANCE
8/16/2018
Copyright © 2018 American Wood Council25
E n t e r P r e s e n t a t i o n T i t l e H e r e 4 9
SECOND – REASON FOR THE FIRE RESISTANCE
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 0
SECOND – REASON FOR THE FIRE RESISTANCE
8/16/2018
Copyright © 2018 American Wood Council26
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 1
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Prescriptive assemblies from the code (721):• Based on ASTM
E119 or UL 263 testing
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 2
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Calculated fire resistance (722.6):• Component Additive
Method (CAM)• Calculated fire
resistance of exposed wood members per Chapter 16 of the NDS
8/16/2018
Copyright © 2018 American Wood Council27
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 3
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 4
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council28
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 5
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 6
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council29
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 7
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 8
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council30
E n t e r P r e s e n t a t i o n T i t l e H e r e 5 9
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 0
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• ASTM E119 test:• 5-ply CLT (6-7/8”)• Single layer 5/8”
Type X wallboard each side
• Achieved 3 hrs. 6 min.
8/16/2018
Copyright © 2018 American Wood Council31
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 1
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 2
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Methods for establishing fire resistance (703):1. Tested fire assembly (ASTM E119 or UL 263)2. Fire-resistance designs documented in approved
sources3. Prescriptive assemblies using fire-resistance rated
designs in Section 7214. Calculation of fire-resistance per Section 7225. Engineering analysis based on a comparison of
building element, component or assembly designs that have been tested
6. Alternative protection methods per Section 104.117. Fire-resistance designs certified by an approved
agency
8/16/2018
Copyright © 2018 American Wood Council32
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 3
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
1. The “thermal” fire endurance of a construction consisting of a number of parallel layers is greater than the sum of the "thermal" fire endurance’s characteristic of the individual layers when exposed separately to fire.
2. The fire endurance of a construction does not decrease with the addition of further layers.
3. The fire endurance of constructions containing continuous air gaps or cavities is greater than the fire endurance of similar constructions of the same weight, but containing no air gaps or cavities.
4. The farther an air gap or cavity is located from the exposed surface, the more beneficial is its effect on the fire endurance.
5. Increasing the thickness of a completely enclosed air layer cannot increase the fire endurance of a construction.
Harmathy’s “Ten Rules of Fire Endurance Ratings”
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 4
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
6. Layers of materials of low thermal conductivity are better utilized on that side of the construction on which fire is more likely to happen.
7. The fire endurance of asymmetrical constructions depends on the direction of heat flow.
8. The presence of moisture, if it does not result in explosive spalling, increases the fire endurance.
9. Load-supporting elements, such as beams, girders and joists, yield higher fire endurance’s when subjected to fire endurance tests as parts of floor, roof, or ceiling assemblies than they would when tested separately.
10. The load-supporting elements (beams, girders, joists, etc.) of a floor, roof, or ceiling assembly can be replaced by such other load-supporting elements which, when tested separately, yielded fire endurance’s not less than that of the assembly.
8/16/2018
Copyright © 2018 American Wood Council33
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 5
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Methods for establishing fire resistance (703):1. Tested fire assembly (ASTM E119 or UL 263)2. Fire-resistance designs documented in approved
sources3. Prescriptive assemblies using fire-resistance rated
designs in Section 7214. Calculation of fire-resistance per Section 7225. Engineering analysis based on a comparison of
building element, component or assembly designs that have been tested
6. Alternative protection methods per Section 104.117. Fire-resistance designs certified by an approved
agency
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 6
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Methods for establishing fire resistance (703):1. Tested fire assembly (ASTM E119 or UL 263)2. Fire-resistance designs documented in approved
sources3. Prescriptive assemblies using fire-resistance rated
designs in Section 7214. Calculation of fire-resistance per Section 7225. Engineering analysis based on a comparison of
building element, component or assembly designs that have been tested
6. Alternative protection methods per Section 104.117. Fire-resistance designs certified by an approved
agency
8/16/2018
Copyright © 2018 American Wood Council34
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 7
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
• Protections of connections in the NDS:• Section 16.3• Protection can be
provided by wood or fire-rated gypsum board
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 8
THIRD – OPTIONS FOR FIRE RESISTANCE
Fire-Resistant Design for Wood Construction
8/16/2018
Copyright © 2018 American Wood Council35
E n t e r P r e s e n t a t i o n T i t l e H e r e 6 9
PRECAUTIONS DURING CONSTRUCTION
Fire-Resistant Design for Wood Construction
E n t e r P r e s e n t a t i o n T i t l e H e r e 7 0
PRECAUTIONS DURING CONSTRUCTION
Fire-Resistant Design for Wood Construction
• IBC/IFC Chapters 33:• Fire-fighting vehicle access and water supply (3310 and
3312) • Requirements for a fire watch, a fire protection
superintendent, and prevention program (3304 and 3308)
• Extensive hot work and roofing requirements (3304, Chapter 35, and 3317)
• Fire extinguishers (3309)• Standpipes (3311)• Temporary heating equipment (3303)• Emergency phones (3309)
8/16/2018
Copyright © 2018 American Wood Council36
E n t e r P r e s e n t a t i o n T i t l e H e r e 7 1
PRECAUTIONS DURING CONSTRUCTION
Fire-Resistant Design for Wood Construction
www.constructionfiresafety.org
Outcomes of ICC Tall Wood Ad Hoc Committee: Proposals and Discussion DES605
Sam Francis, C.B.O.Senior Director, National ProgramsAmerican Wood Council
Paul Coats, P.E., C.B.O.Southeast Regional ManagerAmerican Wood Council
8/16/2018
Copyright © 2018 American Wood Council37
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 7 3
IBC PRINCIPLES FOR HEAVY TIMBER AND MASS TIMBER
Cross-Laminated Timber (CLT)
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 7 4
IBC PRINCIPLES FOR HEAVY TIMBER AND MASS TIMBER
mass timber ≠ conventional frame
8/16/2018
Copyright © 2018 American Wood Council38
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 7 5
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 7 6
ATF FIRE TEST SCENARIOS
Test Description Date Duration
Test 1 All mass timber surfaces protected with 2 layers of 5/8” Type X GWB 5/23/17 3 hours
Test 2 30% of CLT ceiling area in living room and bedroom exposed 5/31/17 4 hours
Test 3Two opposing CLT walls exposed – one in bedroom and one in living room
(there is a partition wall)6/20/17 4 hours
Test 4All mass timber surfaces fully exposed in bedroom and living room.
Sprinklered – normal activation6/27/17
6
minutes
Test 5All mass timber surfaces fully exposed in bedroom and living room (except
bathroom). Sprinklered – 20 min delayed activation6/29/17 30 minutes
8/16/2018
Copyright © 2018 American Wood Council39
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 7 7
14 TALL MASS TIMBER CODE CHANGES
IBC Section 602.4 Type IV construction (G108-18)
IBC Section 703.8 Tested noncombustible protection contribution (FS5-18)
IBC Section 722.7 Calculated noncombustible protection contribution (FS81-18)
IBC Section 703.9 Sealing of adjacent mass timber elements (FS6-18)
IBC Section 718.2.1 Fireblocking materials (FS73-18)
IBC Section 403.3.2 High rise sprinkler water supply (G28-18)
IFC Section 701.6 Owner’s responsibility (F88-18)
IFC Section 3314.7 Fire safety during construction (F266-18)
IBC Table 504.3 (G75-18)
IBC Table 504.4 (G80-18)
IBC Table 506.2 (G84-18)
IBC Section 3102.3 Special construction (G146-18)
IBC Appendix D Fire Districts (G152-18)
IBC Sections 508.4.4.1 and 509.4.1.1 Fire barriers at separated occupancies and incidental uses (G89-18)
www.awc.org/tallmasstimber
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 7 8
I-CODE DEVELOPMENT
https://www.iccsafe.org/gr/Documents/HSTTP/ICC_CodeDevelopmentProcess.pdf
https://www.iccsafe.org/codes-tech-support/codes/code-development/current-code-development-cycle/
8-Step I-Code Development Cycle 2018
1. January 8 (ext. Jan. 11) - Code Changes Submitted2. February 28 - Code Changes Posted3. April 15-23 - Committee Action Hearing (Public Hearing)4. May 15 - Committee Action Hearing Results Posted5. June 1-July 16 - Public Comments Sought on Committee
Action Hearing Results6. August 31 - Public Comments Posted7. Oct 24-31 - Public Comment Hearing8. Fall 2020 - New Edition is Published
8/16/2018
Copyright © 2018 American Wood Council40
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 7 9
I-CODE DEVELOPMENT
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 8 0
OREGON APPROVED ICC MASS TIMBER CODE CHANGE
https://www.oregon.gov/bcd/codes-
stand/Documents/sam-18-01-tallwoodbldgs.pdf
8/16/2018
Copyright © 2018 American Wood Council41
O u t c o m e s o f I C C T a l l W o o d A d H o c C o m m i t t e e – D E S 6 0 5 8 1
AWC ECOURSE
https://awc.org/education/main/lists/des-design-considerations/des605-outcomes-of-icc-tall-wood-adhoc-committee-proposals-and-discussion
AWC recorded webinar
T h i s p r e s e n t a t i o n i s p r o t e c t e d b y U S a n d I n t e r n a t i o n a l C o p y r i g h t l a w s . R e p r o d u c t i o n , d i s t r i b u t i o n , d i s p l a y a n d u s e o f t h e p r e s e n t a t i o n w i t h o u t w r i t t e n p e r m i s s i o n o f A m e r i c a n W o o d C o u n c i l ( A W C ) i s
p r o h i b i t e d . © A m e r i c a n W o o d C o u n c i l 2 0 1 7
in [email protected] | www.awc.org
This concludes the American Institute of Architects Continuing Education Systems Course