Coatings and inks additive - Dow

Coatings and inks additive

Selection guide

PAINTS, INKS AND COATINGS

pg 2

A little makes a big splash! It takes only a little of an additive from Dow to make the significant performance difference your customers demand from your paint, ink and coating formulations. DOWSIL™ and XIAMETER™ brand additives provide problem-solving performance.

• Use in waterborne or solventborne formulations

• Compatible with most binder systems

• High efficiency at low concentration levels to help lower raw materials costs

• Suitable for use in low-VOC, sustainably formulated products

• Formulated for versatility and ease of use

Problem-solving performanceFor more than half a century, Dow has led the way in silicon-based technology and is a global leader in the development of problem-solving, silicon-based technologies used in paints, inks and coatings. Many of our additives impart a combination of benefits, giving you a high benefit-to-cost ratio. Whether you need foam control; improved pigment dispersion, surface wetting, leveling or adhesion; water resistance, mar resistance, slip, gloss or texturization; or any combination of benefits, silicon-based technology from Dow can help you achieve it.

Global resources, local expertise and supportWith global manufacturing facilities, sales offices, research and development laboratories, and Technical Information Centers all linked to a worldwide network of expert local distributors, Dow is able to provide you with an exceptional level of service, support and value. Dow is known for outstanding technical support. Our team of experts will work hand-in-hand with yours to ensure your success with the amazingly versatile materials.

Contents

2–3 Introduction4–9 Features, typical use

and properties of additives from Dow

10–13 Additive selection trees14–15 Additive selection table16 Contact information

pg 3

dow.com/coatings gives you access to:

• Product samples

• Product literature and technical datasheets

• Technical articles

• Customer service

• The name of a technically knowledgeable Dow distributor near you

How to use this guideThis guide will help you explore the properties and performance capabilities of our global line of additives for paints, inks and coatings. Table 1 groups the additives by their primary benefit and describes their physical makeup, features, secondary benefits and properties. Table 2 highlights products available in sample size via our Additive Sample Program.

About concentrations and blendingThe amount of additive required to achieve a particular benefit depends on the type of formulation, the solvent it contains, the resin system and total system solids. Generally, our additives are effective at the concentrations noted in Table 1. Since advantages do not increase proportionally, avoid using excess amounts. Additives from Dow are usually added during grind or let-down, or they are post-added. However, some may be added during any processing stage. See Table 1 for additional information.

mailto:http://www.dow.com/coatings?subject=

pg 4

Pro

du

ctD

escr

ipti

onFeatures/benefits

Com

pat

ible

bi

nd

er s

yste

ms

Poi

nt

of

add

itio

nT

ypic

al

conc

entr

atio

n[2]

Su

itab

le

dil

uen

ts[3

]R

eact

ive

grou

psS

olve

nt

Vis

cosi

ty a

t 25

ºC (7

7ºF)

, cS

t

Food

con

tact

co

mpl

ian

ce[4

]

Slip

, mar

res

ista

nce

DOW

SIL™

11

Add

itive

Sili

cone

pol

yeth

er

copo

lym

er;

10%

act

ive

Incr

ease

s m

ar re

sist

ance

of

solv

entb

orne

coa

tings

; als

o im

prov

es le

velin

g an

d gl

oss

and

pr

even

ts p

igm

ent s

epar

atio

n

Sol

vent

born

e ac

rylic

, al

kyd,

am

ide,

epo

xy,

nitr

ocel

lulo

se, p

olye

ster

, po

lyur

etha

ne, v

inyl

Grin

d,le

t-do

wn

or p

ost

add

0.1-

0.5%

Aro

mat

ics

such

as

xyle

ne

or to

luen

e;

min

eral

spi

rits

or k

eton

es

Car

bino

lTo

luen

e1.

0-2.

0S

wis

s O

rdin

ance

RS

81

7.02

3.21

Ann

ex 1

0 P

art A

or

B

DOW

SIL™

14

Add

itive

Sili

cone

pol

yeth

er

copo

lym

er;

10%

act

ive

Impr

oves

slip

and

mar

resi

stan

ce;

prov

ides

leve

ling

in w

ater

born

e an

d so

lven

tbor

ne c

oatin

gs

Acr

ylic

, alk

yd, e

poxy

, po

lyes

ter,

poly

uret

hane

Grin

d, le

t-do

wn

or

post

add

0.

1-0.

5%W

ater

or

alco

hols

Car

bino

lIs

opro

pano

l<

10

DOW

SIL™

18 A

dditi

ve

Dis

pers

ion

of h

igh

mol

ecul

ar w

eigh

t po

lydi

met

hyls

iloxa

ne

and

silic

one

surf

acta

nt; 1

00%

ac

tive

Pro

vide

s sl

ip a

nd m

ar re

sist

ance

in

wat

erbo

rne

and

solv

entb

orne

co

atin

gs; a

nti-

bloc

king

in

wat

erbo

rne

coat

ings

Acr

ylic

, pol

yest

er,

poly

uret

hane

(w

ater

born

e an

d

solv

entb

orne

)

Let-

dow

n or

pos

t ad

d0.

1-1.

0%W

ater

Non

eN

one

250,

000-

650,

000

Sw

iss

Ord

inan

ce R

S

817.

023.

21 A

nnex

10

Par

t A o

r B

DOW

SIL™

27

Add

itive

Non

-rea

ctiv

e si

licon

e gl

ycol

cop

olym

er;

100%

act

ive

Effe

ctiv

e at

mar

resi

stan

ce a

nd s

lip

whi

le m

aint

aini

ng g

loss

; red

uced

co

effic

ient

of f

rictio

n

Wat

er-b

ased

acr

ylic

fle

xogr

aphi

c in

k an

d U

V

ove

rprin

t var

nish

Let-

dow

n or

pos

t ad

d0.

1-1.

0%W

ater

and

su

itabl

e so

lven

tsN

one

Non

e27

5FD

A 1

76.2

10

DOW

SIL™

29

Add

itive

Sili

cone

pol

yeth

er

copo

lym

er

Impa

rts

mar

resi

stan

ce to

w

ater

born

e an

d so

lven

tbor

ne

coat

ings

; als

o im

prov

es le

velin

g an

d su

bstr

ate

wet

ting;

pro

vid

es

anti-

bloc

king

Acr

ylic

, epo

xy,

poly

uret

hane

Grin

d, le

t-do

wn

or

post

add

0.1-

1.0%

Wat

er o

r al

coho

lsC

arbi

nol

Non

e20

0-50

0S

wis

s O

rdin

ance

RS

81

7.02

3.21

Ann

ex 1

0 P

art A

or

B

DOW

SIL™

51

Add

itive

Dis

pers

ion

of h

igh

mol

ecul

ar w

eigh

t po

lysi

loxa

ne a

nd

surf

acta

nts;

80

% a

ctiv

e

Impa

rts

mar

resi

stan

ce a

nd s

lip

to w

ater

born

e co

atin

gs; m

ay a

lso

prov

ide

room

tem

pera

ture

an

ti-bl

ocki

ng

Wat

erbo

rne

acry

lic, a

lkyd

, ep

oxy,

nitr

ocel

lulo

se,

poly

este

r, po

lyur

etha

ne,

viny

l

Grin

d, le

t-do

wn

or

post

add

0.05

-3.0

%W

ater

Sila

nol

Wat

er20

0,00

0-75

0,00

0

Sw

iss

Ord

inan

ce R

S

817.

023.

21 A

nnex

10

Par

t A o

r B

DOW

SIL™

52

Add

itive

Dis

pers

ion

of h

igh

mol

ecul

ar w

eigh

t po

lysi

loxa

ne a

nd

surf

acta

nts;

64

% a

ctiv

e

Impa

rts

mar

resi

stan

ce a

nd s

lip

to w

ater

bor

ne c

oatin

gs; m

ay a

lso

prov

ide

room

tem

pera

ture

an

ti-bl

ocki

ng

Wat

erbo

rne

acry

lic,

poly

uret

hane

Let-

dow

n or

pos

t ad

d0.

01-3

.5%

Wat

erS

ilano

lW

ater

3,00

0-5,

000

Sw

iss

Ord

inan

ce R

S

817.

023.

21 A

nnex

10

Par

t A o

r B

DOW

SIL™

54

Add

itive

Sili

cone

pol

yeth

er

copo

lym

er

Pro

vide

s m

ar re

sist

ance

, slip

an

d le

velin

g in

wat

erbo

rne

and

so

lven

tbor

ne c

oatin

gs; a

ids

defo

amin

g in

som

e sy

stem

s

Sol

vent

born

e ac

rylic

, al

kyd,

epo

xy, p

olye

ster

, po

lyur

etha

ne, v

inyl

; w

ater

born

e ac

rylic

and

po

lyes

ter

Let-

dow

n or

pos

t ad

d0.

05-1

.0%

Aro

mat

ics

such

as

xyle

ne o

r to

luen

e,

min

eral

spi

rits

Car

bino

lN

one

149-

185

Sw

iss

Ord

inan

ce R

S

817.

023.

21 A

nnex

10

Par

t B, b

fr 1

5-00

02,

bfr

36-0

002

DOW

SIL™

55

Add

itive

Sili

cone

pol

yeth

er

copo

lym

er;

10%

act

ive

Incr

ease

s sl

ip a

nd m

ar re

sist

ance

in

wat

erbo

rne

and

solv

entb

orne

co

atin

gs; i

mpr

oves

leve

ling

in

solv

entb

orne

coa

tings

Wat

erbo

rne

acry

lic,

alky

d, s

olve

ntbo

rne

poly

uret

hane

Pos

t add

0.1-

0.5%

Wat

er o

r al

coho

lsC

arbi

nol

2-bu

toxy

-et

hano

l6

Sw

iss

Ord

inan

ce R

S

817.

023.

21 A

nnex

10

Par

t A o

r B

DOW

SIL™

20

5SL

Addi

tive

Sili

cone

pol

yeth

er

copo

lym

er;

50%

act

ive

Sup

erio

r ha

nd fe

el m

odifi

er fo

r m

ultip

le d

eliv

ery

coat

ing

syst

ems;

lo

wer

s co

effic

ient

of f

rictio

n (C

oF);

foam

con

trol

; als

o ef

fect

ive

in

solv

entb

orne

coa

tings

Wat

erbo

rne

acry

lic,

poly

uret

hane

, alk

yd,

poly

este

r; s

olve

ntbo

rne

poly

uret

hane

, pol

yest

er;

UV

acr

ylat

e

Let-

dow

n0.

1-1.

0%

Alc

ohol

s,

glyc

ol e

ther

s an

d ar

omat

ic

solv

ents

Car

bino

lE

thyl

ene

glyc

ol

isop

ropy

l eth

er25

-60

Sw

iss

Ord

inan

ce R

S

817.

023.

21 A

nnex

10

Par

t B

DOW

SIL™

21

0S

Addi

tive

Ultr

a-hi

gh m

olec

ular

w

eigh

t sili

cone

di

sper

sion

in w

ater

Str

ong

redu

ctio

n in

coe

ffici

ent o

f fr

ictio

n, c

ost e

ffect

ive

slip

add

itive

; ve

ry g

ood

mar

and

abr

asio

n re

sist

ance

; may

als

o pr

ovid

e ro

om

tem

pera

ture

ant

i-bl

ocki

ng; g

ood

co

mpa

tibili

ty a

nd lo

w te

nden

cy to

ca

use

crat

ers

Wat

erbo

rne

acry

lic,

poly

uret

hane

dis

pers

ion

Let-

dow

n or

pos

t ad

d0.

1-0.

3%W

ater

Sila

nol

Wat

er20

0-10

00S

wis

s O

rdin

ance

RS

81

7.02

3.21

Ann

ex 1

0 P

art A

or

B

DOW

SIL™

21

1S

Addi

tive

Ultr

a-hi

gh m

olec

ular

w

eigh

t sili

cone

di

sper

sion

in w

ater

; 60

% a

ctiv

e

Hig

h co

mpa

tiblit

y; L

ow te

nden

cy

to c

ause

cra

ters

eve

n w

ith h

igh

dosa

ge; S

lip e

nhan

cem

ent;

Mar

resi

stan

ce; A

nti-b

lock

ing

impr

ovem

ent

Wat

er a

cryl

ic,

poly

uret

hane

dis

pers

ion,

w

ater

born

e ep

oxy.

Let-

dow

n or

pos

t ad

d0.

1–1%

Wat

er; e

than

ol;

di(p

ropy

lene

gl

ycol

) met

hyl

ethe

r

Sila

nol

Wat

er10

00-3

000

cP (n

ot a

sp

ecifi

catio

n)N

ot e

valu

ated

Tab

le 1

: Fea

ture

s, t

ypic

al u

se a

nd

pro

per

ties

of

add

itiv

es f

rom

Dow

[1] (

Prod

ucts

are

list

ed u

nder

thei

r pr

imar

y be

nefit

)

pg 5

Tab

le 1

: Fea

ture

s, t

ypic

al u

se a

nd

pro

per

ties

of

add

itiv

es f

rom

Dow

[1] (

cont

inue

d)

Pro

du

ctD

escr

ipti

onFeatures/benefits

Com

pat

ible

bi

nd

er s

yste

ms

Poi

nt

of

add

itio

nT

ypic

al

conc

entr

atio

n[2]

Su

itab

le

dil

uen

ts[3

]R

eact

ive

grou

psS

olve

nt

Vis

cosi

ty a

t 25

ºC (

77ºF

),

cSt

Food

con

tact

co

mpl

ian

ce[4

]

Foam

co

ntro

l

Fluo

rosi

lico

nes

DOW

SIL™

7

Addi

tive

Fluo

rosi

licon

e;

5% a

ctiv

e

Pro

vide

s fo

am p

reve

ntio

n an

d

defo

amin

g in

sol

vent

bor

ne

coat

ings

Sol

vent

born

e ac

rylic

, al

kyd,

am

ide,

epo

xy,

poly

este

r, po

lyur

etha

ne,

viny

l

Grin

d,

let-

dow

n or

po

st a

dd0.

05-1

.0%

Ket

ones

Non

eM

ethy

l iso

buty

l ke

tone

0.74

-0.8

4

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

10

0F A

dditi

veFl

uoro

silic

one;

1%

act

ive

Foam

con

trol

age

nt in

so

lven

tbor

ne a

nd r

adia

tion

cura

ble

coat

ings

; goo

d fo

r hi

gh-s

olid

s fo

rmul

atio

ns

Sol

vent

born

e ac

rylic

, al

kyd,

epo

xy, p

olye

ster

, po

lyur

etha

ne; r

adia

tion-

cu

rabl

e ac

ryla

te

Let-

dow

n or

pos

t add

0.

1-1.

0%K

eton

esN

one

Diis

obut

yl k

eton

e<

5

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

10

2F A

dditi

veFl

uoro

silic

one;

1%

act

ive

Pro

vide

s fo

am c

ontr

ol w

ith g

ood

ba

lanc

e be

twee

n ef

fect

iven

ess

and

com

patib

ility

Sol

vent

born

e al

kyd,

2K

po

lyur

etha

ne a

nd

epox

y pa

ints

Grin

d,

let-

dow

n or

po

st a

dd0.

5-0.

7%M

EK

and

n-

Pro

pyl a

ceta

teN

one

Met

hyl e

thyl

ke

tone

and

n-

Pro

pyl a

ceta

teN

ot a

vaila

ble

DOW

SIL™

86

21

Addi

tive

Fluo

rosi

licon

e;

5% a

ctiv

e

Foam

con

trol

age

nt in

sol

vent

-ba

sed

and

radi

atio

n-cu

rabl

e/U

V-cu

rabl

e co

atin

gs

Sol

vent

born

e 1K

sili

cone

ac

rylic

pai

nt, a

cryl

ic

disp

ersi

on p

aint

, alk

yd

and

radi

atio

n-cu

rabl

e pa

int

Grin

d,

let-

dow

n or

po

st a

dd0.

1-1.

0%M

EK

and

n-

Pro

pyl a

ceta

teN

one

Met

hyl e

thyl

ke

tone

0.94

Em

ulsi

ons

DOW

SIL™

62

Add

itive

Sili

cone

em

ulsi

on;

57%

act

ive

Pro

vid

es fo

am c

ontr

ol in

w

ater

born

e in

ks a

nd c

oatin

gs;

good

com

pat

ibili

ty a

nd lo

w

tend

ency

to c

ause

def

ects

Wat

erbo

rne

acry

lic,

poly

uret

hane

Grin

d,

let-

dow

n or

po

st a

dd0.

05-.

05%

Wat

erS

ilano

lW

ater

1,00

0-3,

500

176.

210

[5] ,

Sw

iss

Ord

inan

ce R

S

817.

023.

21

Ann

ex 1

0 P

art A

or

B, b

fr 14

-000

2

DOW

SIL™

68

Add

itive

Sili

cone

em

ulsi

on;

50-5

5% a

ctiv

e

Pro

vide

s im

med

iate

and

su

stai

nabl

e fo

am c

ontr

ol in

w

ater

born

e in

ks, w

ood

coat

ings

an

d pa

ints

Acr

ylic

, pol

yure

than

e P

ost a

dd0.

05-.

05%

Wat

erS

ilano

lW

ater

1,00

0-3,

000

DOW

SIL™

10

6F A

dditi

ve

Sili

cone

em

ulsi

on

type

of a

nti-

foam

co

ntai

ning

sili

ca

42%

act

ivity

co

nten

t

Effe

ctiv

e fo

am c

ontr

ol fo

r w

ater

bor

ne c

oatin

g sy

stem

at

0.1–

0.5

wt%

.G

ood

com

patib

ility

, low

tend

ency

to

cau

se c

rate

rs.

Ant

i-fo

am w

ith lo

ng te

rm

effe

ctiv

enes

s M

icro

-bub

ble

defo

amin

g ab

ility

U

sed

for

both

grin

ding

and

let

dow

n st

age.

Wat

er a

cryl

ic,

poly

uret

hane

dis

pers

ion,

w

ater

born

e ep

oxy.

Let-

dow

n or

pos

t add

0.1–

0.5%

W

ater

NA

Wat

er27

00 M

Pa

Not

eva

luat

ed

DOW

SIL™

10

8F A

dditi

veS

ilico

ne e

mul

sion

; 22

.5%

act

ive

Pro

vide

s fo

am c

ontr

ol in

w

ater

bor

ne c

oatin

gs in

clud

ing

woo

d co

atin

gs, a

rchi

tect

ural

and

in

ks; g

ood

com

patib

ility

and

low

te

nden

cy to

cau

se d

efec

ts

Wat

er-b

ased

sys

tem

sLe

t-do

wn

0.1-

1.0%

Wat

erN

one

Wat

er1,

600

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

XIAM

ETER

™

AFE-

0700

An

tifoa

m

Emul

sion

Sili

cone

ant

ifoam

em

ulsi

on; 1

0%

activ

e

Goo

d fo

am c

ontr

ol a

nd h

igh

pers

iste

ncy

over

a w

ide

pH

and

tem

pera

ture

ran

geW

ater

-bas

ed s

yste

ms

Add

ed

dire

ctly

or

durin

g th

e le

t-do

wn

stag

e

0.05

-1.0

%W

ater

N

one

Non

e1,

750

[1]

Thes

e va

lues

are

not

inte

nded

for

use

in p

rep

arin

g sp

ecifi

catio

ns.

[2]

The

typ

ical

con

cent

ratio

ns a

re u

sage

leve

ls w

here

the

mat

eria

ls h

ave

per

form

ed s

ucce

ssfu

lly. U

sage

leve

ls c

an v

ary

dep

end

ing

on a

pp

licat

ion

and

per

form

ance

req

uire

men

ts. P

leas

e ev

alua

te fo

r op

timum

per

form

ance

in e

ach

spec

ific

app

licat

ion.

[3]

Rev

iew

the

Saf

ety

Dat

a S

heet

for

each

sol

vent

prio

r to

use

. Saf

ety

Dat

a S

heet

s ca

n b

e ob

tain

ed fr

om y

our

solv

ent

sup

plie

r.[4

] C

om

pla

inan

t at

eff

ectiv

e d

ate

of

pub

licat

ion

of

this

sel

ectio

n g

uid

e. V

isit

do

w.c

om

/cus

tom

ersu

pp

ort

to

ob

tain

fo

od

co

ntac

t re

gul

ato

ry in

form

atio

n, in

clud

ing

FD

A, E

U, S

wis

s O

rdin

ance

and

Ger

man

BfR

cle

aran

ce. F

DA

Titl

e 21

CF

R -

175

(175

.105

, 175

.300

, 17

5.32

0) In

dire

ct f

oo

d a

dd

itive

s: a

dhe

sive

s an

d c

om

po

nent

s o

f co

atin

gs;

176

(176

.130

, 176

.170

, 176

.180

, 176

.200

, 176

.210

) Ind

irect

fo

od

ad

diti

ves:

pap

er a

nd p

aper

bo

ard

co

mp

one

nts;

177

(177

.139

0, 1

77.2

600,

177

.152

0(b

))

Ind

irect

fo

od

ad

diti

ves:

po

lym

ers.

[5]

Use

leve

l not

to

exce

ed 0

.015

%.

mailto:http://www.dow.com/customersupport?subject=

pg 6

Tab

le 1

: Fea

ture

s, t

ypic

al u

se a

nd

pro

per

ties

of

add

itiv

es f

rom

Dow

[1] (

cont

inue

d)

Pro

du

ctD

escr

ipti

onFeatures/benefits

Com

pat

ible

bi

nd

er s

yste

ms

Poi

nt

of

add

itio

nT

ypic

al

conc

entr

atio

n[2]

Su

itab

le

dil

uen

ts[3

]R

eact

ive

grou

psS

olve

nt

Vis

cosi

ty a

t 25

ºC (

77ºF

),

cSt

Food

con

tact

co

mpl

ian

ce[4

]

Foam

co

ntro

l (co

ntin

ued

)

Sel

f-d

isp

ersi

ble

co

mp

oun

ds

DOW

SIL™

71

Add

itive

Org

ano-

mod

ified

sili

cone

co

poly

mer

Pro

vide

s fo

am c

ontr

ol in

wat

erbo

rne

coat

ings

, esp

ecia

lly in

k an

d

clea

r w

ood

coat

ings

; bal

anci

ng

effe

ctiv

e fo

am c

ontr

ol a

nd s

urfa

ce

appe

aran

ce

Wat

erbo

rne

acry

licLe

t-do

wn

or

post

add

0.1-

0.5%

Alc

ohol

s, g

lyco

let

hers

and

est

er

alco

hol

Non

eN

one

350-

900

FDA

176

.170

[6] ,

Sw

iss

Ord

inan

ce R

S 8

17.0

23.2

1 A

nnex

10

Par

t A o

r B

, bfr

15-

0002

, bfr

36-

0002

DOW

SIL™

74

Add

itive

Org

ano-

mod

ified

sili

cone

co

poly

mer

Pro

vide

s fo

am c

ontro

l in

wat

erb

orne

co

atin

gs, e

spec

ially

woo

d c

oatin

gs;

bal

anci

ng e

ffect

ive

foam

con

trol

and

su

rfac

e ap

pear

ance

Wat

erbo

rne

acry

licLe

t-do

wn

or

post

add

0.1

-0.5

%A

lcoh

ols

and

glyc

ol e

ther

sC

arbi

nol

Non

e35

0-1,

400

FDA

176

.210

, Sw

iss

Ord

inan

ce R

S 8

17.0

23.2

1 A

nnex

10

Par

t B, b

fr 1

5-00

02,

bfr

36-0

002

DOW

SIL™

16

3 Ad

ditiv

eS

ilico

ne a

nti-

foam

com

poun

d;

100%

act

ive

Pro

vide

s fo

am c

ontr

ol in

wat

erbo

rne,

so

lven

tbor

ne a

nd r

adia

tion-

cure

d

coat

ings

and

inks

Wat

erbo

rne

and

so

lven

tbor

ne a

cryl

ic,

epox

y, p

olye

ster

, po

lyur

etha

ne, v

inyl

; als

o ra

diat

ion-

cure

d

Let-

dow

n or

po

st a

dd0.

1-1.

0%G

lyco

lsS

ilano

lN

one

750-

1,55

0

FDA

[7] 1

75.1

05, 1

75.3

00,

176.

170,

176

.180

, 176

.200

,17

6.21

0, S

wis

s O

rdin

ance

RS

81

7.02

3.21

Ann

ex 1

0 P

art A

or

B, C

N 9

685.

2016

DOW

SIL™

10

7F

Addi

tive

Eas

ily d

ispe

rsib

le m

odifi

ed

poly

silo

xane

com

poun

d.

Con

tain

s si

lica.

100%

act

ive

cont

ent

Vers

atile

def

oam

er fo

r w

ater

bas

ed

pai

nts

and

coat

ings

, effe

ctiv

e at

0.

1–1.

0 w

t% lo

adin

g.Im

prov

ed c

omp

atib

ility

, low

tend

ency

to

cau

se c

rate

rs.

Use

d fo

r bo

th g

rindi

ng a

nd le

t dow

n st

age.

A

PE

O fr

ee, l

ow V

OC

.

Wat

er a

cryl

ic,

styr

ene

acry

lic,

VAE

ar

chite

ctur

al p

aint

s.

Flex

ogra

phic

inks

, ac

rylic

OP

V.

Let-

dow

n or

po

st a

dd0.

1–0.

5%W

ater

N/A

Wat

er30

0-50

0 M

Pa

FDA

: no

t ap

pro

ved

.S

wis

s O

rdin

ance

RS

81

7.02

3.21

Ann

ex

10 P

art

A o

r B

DOW

SIL™

85

90

Addi

tive

Sili

cone

ant

i-fo

am c

ompo

und

w

ith s

ilica

; 100

% a

ctiv

e

Top

choi

ce fo

r ar

chite

ctur

e ap

plic

atio

ns; h

ighl

y ef

ficie

nt a

nti-

foam

at l

ow d

osag

e fo

r w

ater

born

e co

atin

g an

d in

k sy

stem

; no

impa

ct

on g

loss

; low

vis

cosi

ty fo

r ea

sy

dis

pers

ibili

ty

Wat

erbo

rne

acry

lic

styr

ene

emul

sion

pai

nt,

flexo

grap

hic

inks

, acr

ylic

ov

erpr

int v

arni

sh, a

cryl

ic

uret

hane

em

ulsi

ons

Grin

d, le

t-do

wn

afte

r th

icke

ners

or

post

add

0.05

-1.0

%

Can

be

adde

d

dire

ctly

or

pre-

dilu

ted

w

ith a

lcoh

ols

or

poly

glyc

ols

Non

eN

one

784

Sw

iss

Ord

inan

ce R

S

817.

023.

21 A

nnex

10

Par

t A

or

B

DOW

SIL™

86

03

Addi

tive

Sili

cone

ant

i-fo

am c

ompo

und

w

ith s

ilica

; 100

% a

ctiv

e

Effe

ctiv

e fo

am c

ontr

ol fo

r w

ater

born

e co

atin

g an

d in

k sy

stem

s at

low

do

sage

s; te

nden

cy to

war

d lo

w

surf

ace

defe

cts

Wat

erbo

rne

acry

lic

styr

ene

emul

sion

pai

nt,

inte

rior w

all p

aint

, flex

o gr

avur

e in

ks, p

olye

ster

ac

rylic

, acr

ylic

-mod

ified

al

kyd

Grin

d,

let-

dow

n or

po

st a

dd0.

05-1

.0%

Can

be

adde

d

dire

ctly

or

pre-

dilu

ted

w

ith a

lcoh

ols

or

poly

glyc

ols

Non

eN

one

900-

3,60

0S

wis

s O

rdin

ance

RS

81

7.02

3.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

86

10

Addi

tive

Sili

cone

ant

i-fo

am c

ompo

und

w

ith s

ilica

100%

act

ivity

con

tent

Effe

ctiv

e fo

am c

ontr

ol fo

r w

ater

born

e co

atin

g sy

stem

at 0

.1–0

.5 w

t%

with

long

term

effe

ctiv

enes

s du

ring

grin

din

g st

age.

Wat

er a

cryl

ic,

poly

uret

hane

dis

pers

ion,

w

ater

born

e ep

oxy.

Grin

ding

sta

ge0.

1–0.

5%G

lyco

l eth

erN

one

Non

e70

0 M

Pa

Not

eva

luat

ed

DOW

SIL™

86

28

Addi

tive

100%

org

anof

unct

iona

l sili

cone

Effe

ctiv

e fo

am c

ontr

ol fo

r w

ater

bor

ne

coat

ing

syst

ems

Wat

erbo

rne

UV-

cura

ble

inks

; wat

erbo

rne

woo

d st

ains

, trim

s an

d

varn

ishe

s

Add

ed d

irect

ly

or d

urin

g th

e le

t-do

wn

stag

e

0.05

-1.0

%G

lyco

l eth

erN

one

Non

e4,

000

Rel

ease

ad

diti

ves

DOW

SIL™

1-

9770

Re

leas

e Ad

ditiv

e

Hig

h vi

scos

ity, r

eact

ive

si

licon

e flu

id

Pro

vide

s re

leas

e pr

oper

ties

in c

lear

or

pig

men

ted

coa

tings

; can

be

used

in

food

con

tact

app

licat

ions

Pol

yest

er, s

ilico

nes

Grin

d,

let-

dow

n or

po

st a

dd0.

1-5.

0%

Aro

mat

ic

hydr

ocar

bon

s,

keto

nes,

ac

etat

es a

nd

othe

r su

itabl

e so

lven

ts

Sila

nol

Non

e11

,000

-14,

000

FDA

175

.105

, 175

.300

, 17

6.17

0, 1

76.1

80, 1

76.2

00,

176.

210,

177

.226

0, 1

77.2

800,

17

8.31

20, 1

78.3

570,

178

.391

0,

181.

28, b

fr 15

-000

2

[1]

Thes

e va

lues

are

not

inte

nded

for

use

in p

rep

arin

g sp

ecifi

catio

ns.

[2]

The

typ

ical

con

cent

ratio

ns a

re u

sage

leve

ls w

here

the

mat

eria

ls h

ave

per

form

ed s

ucce

ssfu

lly. U

sage

leve

ls c

an v

ary

dep

end

ing

on a

pp

licat

ion

and

per

form

ance

req

uire

men

ts. P

leas

e ev

alua

te fo

r op

timum

per

form

ance

in e

ach

spec

ific

app

licat

ion.

[3]

Rev

iew

the

Saf

ety

Dat

a S

heet

for

each

sol

vent

prio

r to

use

. Saf

ety

Dat

a S

heet

s ca

n b

e ob

tain

ed fr

om y

our

solv

ent

sup

plie

r.[4

] C

omp

lain

ant

at e

ffect

ive

dat

e of

pub

licat

ion

of t

his

sele

ctio

n gu

ide.

Vis

it d

ow.c

om/c

usto

mer

sup

por

t to

ob

tain

food

con

tact

reg

ulat

ory

info

rmat

ion,

incl

udin

g FD

A, E

U, S

wis

s O

rdin

ance

and

Ger

man

BfR

cle

aran

ce. F

DA

Titl

e 21

CFR

- 1

75 (1

75.1

05, 1

75.3

00, 1

75.3

20) I

ndire

ct fo

od a

dd

itive

s: a

dhe

sive

s an

d

com

pon

ents

of c

oatin

gs; 1

76 (1

76.1

30, 1

76.1

70, 1

76.1

80, 1

76.2

00, 1

76.2

10) I

ndire

ct fo

od a

dd

itive

s: p

aper

and

pap

er b

oard

com

pon

ents

; 177

(177

.139

0, 1

77.2

600,

177

.152

0(b

)) In

dire

ct fo

od a

dd

itive

s: p

olym

ers.

[5]

Che

mic

ally

eq

uiva

lent

to

DO

WS

IL™

Z-6

032

Sila

ne.

[6]

Lim

itatio

ns m

ay a

pp

ly. P

leas

e co

ntac

t N

a.in

fo@

dow

.com

for

mor

e in

form

atio

n.[7

] U

se le

vel n

ot t

o ex

ceed

0.0

25%

.


mailto:Na.info%40dow.com?subject=

pg 7

Tab

le 1

: Fea

ture

s, t

ypic

al u

se a

nd

pro

per

ties

of

add

itiv

es f

rom

Dow

[1] (

cont

inue

d)

Pro

du

ctD

escr

ipti

onFeatures/benefits

Com

pat

ible

bi

nd

er s

yste

ms

Poi

nt

of

add

itio

nT

ypic

al

conc

entr

atio

n[2]

Su

itab

le

dil

uen

ts[3

]R

eact

ive

grou

psS

olve

nt

Vis

cosi

ty

at 2

5ºC

(7

7ºF

),

cSt

Foo

d co

nta

ct

com

plia

nce

[4]

Ad

hesi

on

pro

mo

tion

and

sur

face

tre

atm

ent

(sub

stra

tes,

pig

men

ts)

DOW

SIL™

3

Addi

tive

Sila

nol-f

unct

iona

l (S

i-OH

) add

itive

; 10%

ac

tive

Impr

oves

pig

men

t dis

pers

ion

and

redu

ces

sepa

ratio

n an

d

flota

tion

in s

olve

ntbo

rne

coat

ings

; als

o pr

ovid

es le

velin

g,

flow

-out

and

glo

ss

Sol

vent

born

e ac

rylic

, alk

yd,

poly

este

r, ep

oxy,

po

lyur

etha

ne

Grin

d, le

t-do

wn

or p

ost

add

0.1-

0.5%

Aro

mat

ics

such

as

xyle

ne

or to

luen

e;

min

eral

sp

irits

or

ket

ones

Sila

nol

Tolu

ene

0.7-

1.4

DOW

SIL™

70

0P

Addi

tive

Alk

oxy

silo

xane

with

org

anic

gro

up;

90%

act

ive

Tita

nium

dio

xide

dis

pers

ant b

oth

for h

igh-

grad

e an

d lo

w-g

rade

Ti

O2;

prov

ides

sta

biliz

atio

n of

pi

gmen

t dis

pers

ion

and

prev

ents

pi

gmen

t floo

ding

and

floa

ting

Sol

vent

born

e in

orga

nic

fille

r di

sper

sant

Com

bine

w

ith re

sins

be

fore

add

ing

pigm

ent f

or

grin

ding

0.02

-4.0

%X

ylen

e an

d

but

yl a

ceta

teA

lkox

yM

etha

nol

5.5

DOW

SIL™

Z-

6121

Si

lane

Am

inoe

thyl

amin

opro

pyltr

ialk

oxys

ilane

; 50

% a

ctiv

e

Impr

oves

adh

esio

n of

w

ater

born

e an

d so

lven

tbor

ne

coat

ings

whe

n bo

nded

to g

lass

or

met

al s

ubst

rate

s; c

an b

e us

ed a

s an

add

itive

or

prim

er

Wat

erbo

rne

and

so

lven

tbor

ne

acry

lic, a

lkyd

, epo

xy,

poly

este

r

Grin

d fo

r w

ater

born

e;

let-

dow

n or

po

st a

dd fo

r so

lven

tbor

ne

Prim

er: d

ilute

to 1

0% a

ctiv

eA

dditi

ve:

0.1-

5.0%

Alc

ohol

s an

d w

ater

Am

ino;

al

koxy

-sily

ln-

But

anol

< 1

0FD

A 1

75.1

05

DOW

SIL™

Z-

6137

Si

lane

Aqu

eous

sol

utio

n of

am

ino-

func

tiona

l si

licon

e po

lym

ers;

22.

5% a

ctiv

e

Pro

mot

es a

dhes

ion

of

wat

erbo

rne

coat

ings

to

inor

gani

c su

bstr

ates

Wat

erbo

rne

poly

este

rP

ost a

dd0.

1-5.

0%W

ater

Am

ino;

sila

nol

Wat

er3-

7

XIAM

ETER

™

OFS

-601

1 Si

lane

Am

inop

ropy

ltrie

thox

ysila

ne; 9

9% a

ctiv

e

Adh

esio

n pr

omot

er in

w

ater

born

e an

d so

lven

tbor

ne

coat

ings

and

pig

men

t tre

atm

ent

in w

ater

born

e co

atin

gs

Wat

erbo

rne

and

so

lven

tbor

ne

acry

lic; s

olve

ntbo

rne

poly

uret

hane

; 2K

ac

rylic

epo

xy fo

r co

ncre

te a

nd in

dust

rial

mai

nten

ance

Grin

d or

le

t-do

wn

0.05

-2.0

%A

lcoh

ols

and

wat

erA

min

o;et

hoxy

-sily

lN

one

< 1

0

FDA

175

.105

, S

wis

s O

rdin

ance

R

S 8

17.0

23.2

1 A

nnex

10

Par

t A,

CN

968

5.20

16

XIAM

ETER

™

OFS

-602

0 Si

lane

Am

inoe

thyl

amin

opro

pyltr

imet

hoxy

sila

ne;

99%

act

ive

Adh

esio

n pr

omot

er a

nd

pigm

ent t

reat

men

t in

wat

erbo

rne

and

solv

entb

orne

co

atin

gs

Wat

erbo

rne

and

so

lven

tbor

ne

acry

lic, a

lkyd

, epo

xy,

poly

uret

hane

Grin

d,le

t-do

wn

or

post

add

Prim

er: d

ilute

to

10%

act

ive

in is

opro

pano

l A

dditi

ve:

0.5-

2.0%

Alc

ohol

s an

d w

ater

Am

ino;

m

etho

xy-s

ilyl

Non

e<

10

FDA

175

.105

,17

5.30

0

XIAM

ETER

™

OFS

-603

0 Si

lane

3-m

etha

cryl

oxyp

ropy

ltrim

etho

xysi

lane

; 98

% a

ctiv

e

Impr

oves

adh

esio

n of

w

ater

born

e, s

olve

ntbo

rne

and

ra

diat

ion-

cure

d co

atin

gs to

in

orga

nic

subs

trat

es w

hen

used

as

a p

rimer

or

addi

tive

Wat

erbo

rne

and

so

lven

tbor

ne a

cryl

ic,

alky

d, e

poxy

, pol

yest

er,

poly

uret

hane

, vin

yl;

radi

atio

n-cu

red

acry

lic

Let-

dow

n or

po

st a

dd

Prim

er: d

ilute

to

0.1-

0.5%

act

ive

in

acid

ified

(pH

~4.

0)

wat

er A

dditi

ve:

0.1-

3.0%

Alc

ohol

s an

d w

ater

Met

hacr

ylat

e;

met

hoxy

-sily

lN

one

2.3-

2.7

FDA

177

.246

5[7]

XIAM

ETER

™

OFS

-603

2 Si

lane

[5]

Cat

ioni

c vi

nylb

enzy

l and

am

ino-

func

tiona

l met

hoxy

-sila

ne; 4

0% a

ctiv

e

Adh

esio

n pr

omot

er in

w

ater

born

e an

d so

lven

tbor

ne

coat

ings

; can

be

used

as

an

addi

tive

or p

rimer

Wat

erbo

rne

and

so

lven

tbor

ne a

cryl

ic,

epox

y

Grin

d, le

t-do

wn

or p

ost

add

Prim

er: d

ilute

w

ith m

etha

nol

or e

than

ol m

ixed

w

ith w

ater

10:

1 A

dditi

ve:

0.05

-3.0

wt%

Alc

ohol

s an

d w

ater

Am

ino;

vi

nylb

enzy

l; m

etho

xy-s

ilyl

Met

hano

l1-

3

XIAM

ETER

™

OFS

-604

0 Si

lane

Gly

cido

xypr

opyl

trim

etho

xysi

lane

; 99

% a

ctiv

e

Adh

esio

n pr

omot

er a

nd

pigm

ent t

reat

men

t in

wat

erbo

rne

and

solv

entb

orne

co

atin

gs; c

an b

e us

ed a

s an

ad

ditiv

e or

prim

er

Wat

erbo

rne

and

so

lven

tbor

ne a

cryl

ic,

alky

d, a

min

e, e

poxy

, po

lyur

etha

ne, v

inyl

Grin

d, le

t-do

wn

or p

ost

add

Prim

er: d

ilute

to

10%

act

ive

in is

opro

pano

l A

dditi

ve:

0.05

-3.0

%

Alc

ohol

san

d w

ater

Ep

oxy;

m

etho

xy-s

ilyl

Non

e2.

95-3

.20

FDA

177

.139

0,

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art B

[8]

XIAM

ETER

™

OFS

-630

0 Si

lane

Vin

yltr

imet

hoxy

sila

ne; 9

9% a

ctiv

e

Bon

ds w

ith in

orga

nic

surf

aces

th

roug

h al

koxy

sila

ne; f

orm

s si

loxa

ne c

ross

links

via

m

oist

ure

cure

Sol

vent

born

e ac

rylic

, alk

yd, e

poxy

, po

lyur

etha

ne;

UV-

cura

ble

epox

y

Can

be

adde

d

durin

g so

lven

tbor

ne

pain

t for

mul

atio

n at

the

pigm

ent

grin

d st

ep

Add

itive

: 0.

05-1

.0%

Alc

ohol

s an

d w

ater

Vin

yl;

met

hoxy

-sily

lN

one

0.56

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

[1]

Thes

e va

lues

are

not

inte

nded

for

use

in p

rep

arin

g sp

ecifi

catio

ns.

[2]

The

typ

ical

con

cent

ratio

ns a

re u

sage

leve

ls w

here

the

mat

eria

ls h

ave

per

form

ed s

ucce

ssfu

lly. U

sage

leve

ls c

an v

ary

dep

end

ing

on a

pp

licat

ion

and

per

form

ance

req

uire

men

ts. P

leas

e ev

alua

te fo

r op

timum

per

form

ance

in e

ach

spec

ific

app

licat

ion.

[3]

Rev

iew

the

Saf

ety

Dat

a S

heet

for

each

sol

vent

prio

r to

use

. Saf

ety

Dat

a S

heet

s ca

n b

e ob

tain

ed fr

om y

our

solv

ent

sup

plie

r.[4

] C

omp

lain

ant

at e

ffect

ive

dat

e of

pub

licat

ion

of t

his

sele

ctio

n gu

ide.

Vis

it d

ow.c

om/c

usto

mer

sup

por

t to

ob

tain

food

con

tact

reg

ulat

ory

info

rmat

ion,

incl

udin

g FD

A, E

U, S

wis

s O

rdin

ance

and

Ger

man

BfR

cle

aran

ce. F

DA

Titl

e 21

CFR

- 1

75 (1

75.1

05, 1

75.3

00, 1

75.3

20) I

ndire

ct fo

od a

dd

itive

s: a

dhe

sive

s an

d

com

pon

ents

of c

oatin

gs; 1

76 (1

76.1

30, 1

76.1

70, 1

76.1

80, 1

76.2

00, 1

76.2

10) I

ndire

ct fo

od a

dd

itive

s: p

aper

and

pap

er b

oard

com

pon

ents

; 177

(177

.139

0, 1

77.2

600,

177

.152

0(b

)) In

dire

ct fo

od a

dd

itive

s: p

olym

ers.

[5]

Che

mic

ally

eq

uiva

lent

to

DO

WS

IL™

Z-6

032

Sila

ne.

[7]

This

pro

duc

t is

an

unre

acte

d m

onom

er. M

ay b

e co

pol

ymer

ized

as

stip

ulat

ed in

177

.246

5(a)

. [8

] M

ay b

e us

ed a

s an

op

tiona

l trim

etho

xysi

lane

cou

plin

g ag

ents

in a

ccor

dan

ce w

ith 1

77.1

390

(c)(2

)(iv)

(a).


pg 8

Tab

le 1

: Fea

ture

s, t

ypic

al u

se a

nd

pro

per

ties

of

add

itiv

es f

rom

Dow

[1] (

cont

inue

d)

Pro

du

ctD

escr

ipti

onFeatures/benefits

Com

pat

ible

bi

nd

er s

yste

ms

Poi

nt o

f ad

dit

ion

Typ

ical

co

ncen

trat

ion[2

]S

uit

able

d

ilu

ents

[3]

Rea

ctiv

e gr

oups

Solv

ent

Vis

cosi

ty

at 2

5ºC

(7

7ºF

),

cSt

Food

con

tact

co

mpl

ian

ce[4

]

Wat

er r

esis

tanc

e

DOW

SIL™

84

Add

itive

Low

-vis

cosi

ty e

mul

sion

of

sili

cone

ela

stom

er

prec

urso

rs; 6

0% a

ctiv

e

Pro

vide

s w

ater

resi

stan

ce fo

r w

ater

born

e sy

stem

s, p

artic

ular

ly in

ksM

ainl

y ac

rylic

s Le

t-do

wn

or p

ost a

dd1.

0-5.

0%W

ater

Sila

nol

Wat

er25

0-65

0

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

85

Add

itive

Med

ium

-vis

cosi

ty

emul

sion

of s

ilico

ne

elas

tom

er p

recu

rsor

s;

60%

act

ive

Pro

vide

s w

ater

resi

stan

ce fo

r w

ater

bor

ne

syst

ems,

par

ticul

arly

inks

Mai

nly

acry

lics

Let-

dow

n or

pos

t add

1.0-

5.0%

Wat

erS

ilano

lW

ater

34,0

00-

46,0

00

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

87

Add

itive

Em

ulsi

on; 3

8-44

%

activ

es

Pro

vide

s w

ater

repe

llenc

y an

d w

ater

bea

ding

for

wat

erbo

rne

syst

ems

with

min

imal

effe

ct o

n w

ater

va

por p

erm

eabi

lity;

par

ticul

arly

for d

ecor

ativ

e pa

ints

Acr

ylic

, sty

rene

-acr

ylic

s an

d vi

nyl

acet

ate

emul

sion

sLe

t-do

wn

or p

ost a

dd1.

0-5.

0%W

ater

Eth

oxy-

sila

nol

Wat

er6

DOW

SIL™

88

Add

itive

Sila

ne/s

iloxa

ne b

lend

;98

% a

ctiv

es

Pro

vide

s w

ater

rep

elle

ncy

with

min

imal

effe

ct

on w

ater

vap

or p

erm

eabi

lity;

can

be

used

in

wat

erbo

rne

syst

ems

cont

aini

ng p

olar

sol

vent

s an

d s

olve

ntbo

rne

syst

ems;

par

ticul

arly

for

deco

rativ

e pa

ints

Acr

ylic

, sty

rene

-acr

ylic

sLe

t-do

wn

or p

ost a

dd1.

0-5.

0%

Alip

hatic

and

ar

omat

ic

hydr

ocar

bons

and

po

lar

solv

ents

Alk

oxy-

sila

nol

Non

e35

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

90

1H

Addi

tive

Sili

cone

em

ulsi

on; 6

0%

activ

e

Gen

eral

-pur

pose

low

-VO

C h

ydro

phob

e to

im

pro

ve w

ater

resi

stan

ce a

nd w

ater

con

tact

an

gle;

may

pro

vide

cor

rosi

on re

sist

ance

for

wat

erbo

rne

indu

stria

l met

al c

oatin

g

Wat

er-b

ased

acr

ylic

, sty

rene

ac

rylic

and

VA

E s

yste

ms

Let-

dow

n or

pos

t add

0.5-

5.0%

Wat

erA

lkox

y;si

lano

lW

ater

Not

ava

ilabl

e

DOW

SIL™

90

2H

Addi

tive

Sili

cone

-res

in-b

ased

emul

sion

; 50%

act

ive

Co-

bind

er fo

r hi

gh-P

VC

silo

xane

pai

nts;

d

ecre

ases

wat

er a

bsor

ptio

n th

roug

h hy

dro

phob

izat

ion

of p

ores

; can

be

com

bine

d

with

a b

eadi

ng a

dditi

ve to

add

ition

ally

ach

ieve

hi

gh w

ater

-con

tact

ang

le; m

ay p

rovi

de

dirt

pic

k up

resi

stan

ce

Wat

er-b

ased

acr

ylic

, sty

rene

ac

rylic

and

VA

E s

yste

ms

Let-

dow

n or

pos

t add

8.0-

10.0

%W

ater

Alk

oxy

Wat

er30

0-2,

000

DOW

SIL™

90

4H

Addi

tive

Am

ino

func

tiona

l po

lydi

met

hyls

iloxa

ne

Pro

vide

s sn

ail t

rail

resi

stan

ce in

hig

h P

VC

(dar

k)

colo

red

pain

ts a

nd p

rovi

des

impr

oved

sur

face

hy

drop

hobi

city

and

wat

er re

pelle

ncy

Acr

ylic

and

sty

rene

acr

ylic

hig

h pi

gmen

ted

pain

tG

rind

or

let-

dow

n1-

5%Ty

pica

l coa

lesc

ent

used

in a

rchi

tect

ural

fo

rmul

atio

nsA

min

oN

one

70

DOW

SIL™

90

6H

Addi

tive

Low

VO

C e

mul

sion

of

silic

one

elas

tom

er; 5

0%

activ

es

Pro

vide

s w

ater

resi

stan

ce fo

r w

ater

bor

ne

syst

ems

with

litt

le e

ffect

on

wat

er v

apor

pe

rmea

bili

ty; c

an b

e us

ed a

s a

co-b

inde

rA

cryl

icLe

t-do

wn

or p

ost a

dd1.

0-10

.0%

Wat

erS

ilano

lW

ater

550

Leve

ling

, glo

ss

DOW

SIL™

56

Add

itive

Ary

lalk

yl-m

odifi

ed

silic

one;

100

% a

ctiv

e

Aid

s de

aera

tion

with

out d

esta

bili

zing

the

curt

ain

in s

olve

ntbo

rne

curt

ain

coat

ings

; im

pro

ves

leve

ling

and

glo

ss; a

ids

pigm

ent o

rient

atio

n;

good

ther

mos

tabi

lity

Wat

er-b

ased

acr

ylic

, sty

rene

ac

rylic

and

VA

E s

yste

ms

Grin

d,

let-

dow

n or

po

st a

dd0.

05-0

.5%

Aro

mat

ics

such

as

xyl

ene,

tolu

ene,

m

iner

al s

pirit

s an

d

este

rs s

uch

as b

utyl

ac

etat

e

Non

eN

one

1,12

5-1,

645

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

57

Add

itive

Sili

cone

pol

yeth

er

copo

lym

er

Impr

oves

leve

ling,

slip

, mar

resi

stan

ce a

nd

glos

s in

wat

erbo

rne

and

sol

vent

born

e co

atin

gs;

prov

ides

sub

stra

te w

ettin

g

(NO

TE: A

lway

s ch

eck

com

patib

ility

bef

ore

usag

e)

Grin

d,

let-

dow

n or

po

st a

dd0.

1-1.

0%

Ace

tone

, tol

uene

, m

iner

al s

pirit

s an

d

isop

ropy

l alc

ohol

; di

sper

sibl

e in

wat

er

Non

eN

one

175-

390

FDA

176

.170

, 17

5.30

01], S

wis

s O

rdin

ance

RS

81

7.02

3.21

A

nnex

10

Par

t B,

bfr 1

5-00

02, C

N

9685

.201

6

DOW

SIL™

40

1LS

Addi

tive

Sili

cone

pol

yeth

er

copo

lym

er

Flow

and

leve

ling

addi

tive

for

solv

entb

orne

and

w

ater

born

e co

atin

gs; a

lso

low

ers

coef

ficie

nt o

f fr

ictio

n to

impr

ove

slip

and

han

d fe

el; c

ompa

tible

w

ith c

lear

coa

ts

Wat

er-b

ased

acr

ylic

, sty

rene

ac

rylic

and

VA

E s

yste

ms

Grin

d,

let-

dow

n or

po

st a

dd0.

05-1

.0%

Alc

ohol

s, g

lyco

l et

hers

and

aro

mat

ic

solv

ents

Non

eN

one

100-

250

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

B, b

fr.15

-000

2,

bfr.3

6-00

02

DOW

SIL™

40

2LS

Addi

tive

Sili

cone

pol

yeth

er

copo

lym

er

Effe

ctiv

e flo

w a

nd le

velin

g ad

ditiv

e fo

r wat

erbo

rne

and

rad

iatio

n cu

rab

le s

yste

ms;

als

o lo

wer

s co

effic

ient

of f

rictio

n, g

ivin

g go

od s

lip; s

uita

ble

in p

igm

ente

d an

d cl

ear

coat

form

ulat

ions

; als

o pr

ovid

es a

nti-

bloc

king

and

ap

plie

d hi

din

g

(NO

TE: A

lway

s ch

eck

com

patib

ility

bef

ore

usag

e)Le

t-do

wn

0.1-

1.0%

Alc

ohol

s, g

lyco

l et

hers

and

aro

mat

ic

solv

ents

Car

bino

lN

one

280-

400

Sw

iss

Ord

inan

ce

RS

817

.023

.21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

85

26

Addi

tive

Car

bin

ol-f

unct

iona

l si

licon

e po

lyet

her;

100%

ac

tive

Pro

vide

s le

velin

g an

d sl

ip w

ith g

ood

com

patib

ility

in

sol

vent

bor

ne, w

ater

born

e an

d U

V-cu

rabl

e co

atin

gs, i

nks

and

over

prin

t var

nish

es

Sol

vent

-bas

ed a

cryl

ic, e

poxy

, po

lyes

ter

and

uret

hane

sys

tem

s;

wat

erbo

rne

acry

lic, p

olye

ster

, ep

oxy

and

uret

hane

sys

tem

s; U

V

syst

ems

Grin

d,

let-

dow

n or

po

st a

dd0.

2-1.

0%W

ater

, alc

ohol

s,

tolu

ene,

xyl

ene

Car

bino

lN

one

1,55

2

[1]

Lim

itatio

ns m

ay a

pp

ly. P

leas

e co

ntac

t w

ww

.dow

.com

/con

tact

us fo

r m

ore

info

rmat

ion.

mailto:http://www.dow.com/contactus?subject=

pg 9

Tab

le 1

: Fea

ture

s, t

ypic

al u

se a

nd

pro

per

ties

of

add

itiv

es f

rom

Dow

[1] (

Prod

ucts

are

list

ed u

nder

thei

r pr

imar

y be

nefit

)

[1]

Thes

e va

lues

are

not

inte

nded

for

use

in p

rep

arin

g sp

ecifi

catio

ns.

[2]

The

typ

ical

con

cent

ratio

ns a

re u

sage

leve

ls w

here

the

mat

eria

ls h

ave

per

form

ed s

ucce

ssfu

lly. U

sage

leve

ls c

an v

ary

dep

end

ing

on a

pp

licat

ion

and

per

form

ance

req

uire

men

ts. P

leas

e ev

alua

te fo

r op

timum

per

form

ance

in e

ach

spec

ific

app

licat

ion.

[3]

Rev

iew

the

Saf

ety

Dat

a S

heet

for

each

sol

vent

prio

r to

use

. Saf

ety

Dat

a S

heet

s ca

n b

e ob

tain

ed fr

om y

our

solv

ent

sup

plie

r.[4

] C

omp

lain

ant

at e

ffect

ive

dat

e of

pub

licat

ion

of t

his

sele

ctio

n gu

ide.

Vis

it d

ow.c

om/c

usto

mer

sup

por

t to

ob

tain

food

con

tact

reg

ulat

ory

info

rmat

ion,

incl

udin

g FD

A, E

U, S

wis

s O

rdin

ance

and

Ger

man

BfR

cle

aran

ce. F

DA

Titl

e 21

CFR

- 1

75 (1

75.1

05,

175.

300,

17

5.32

0) In

dire

ct f

oo

d a

dd

itive

s: a

dhe

sive

s an

d c

om

po

nent

s o

f co

atin

gs;

176

(176

.130

, 17

6.17

0, 1

76.1

80,

176.

200,

176

.210

) Ind

irect

fo

od

ad

diti

ves:

pap

er a

nd p

aper

bo

ard

co

mp

one

nts;

177

(177

.139

0, 1

77.2

600,

177

.152

0(b

)) In

dire

ct f

oo

d

add

itive

s: p

oly

mer

s.N

A =

Not

Ap

plic

able

Pro

du

ctD

escr

ipti

onFeatures/benefits

Com

pat

ible

bi

nd

er s

yste

ms

Poi

nt

of

add

itio

nT

ypic

al

conc

en-

trat

ion[2

]

Su

itab

le

dil

uen

ts[3

]R

eact

ive

grou

psSo

lven

tV

isco

sity

at

25º

C

(77º

F),

cS

tFo

od c

onta

ct

com

plia

nce

[4]

Wet

ting

DOW

SIL™

67

Add

itive

Sili

cone

pol

yeth

er c

opol

ymer

Impa

rts

spre

adin

g an

d w

ettin

g in

wat

erbo

rne

and

radi

atio

n-cu

rabl

e co

atin

gs o

n di

fficu

lt su

bstr

ates

, e.g

., lo

w-e

nerg

y su

bstr

ates

suc

h as

pol

yeth

ylen

e, p

olyp

ropy

lene

, pol

yest

er;

suita

ble

in in

ks, d

ecor

ativ

e an

d in

dust

rial

coat

ings

for

plas

tic, m

etal

and

woo

d

Wat

erbo

rne

acry

late

, al

kyd,

pol

yest

er,

poly

uret

hane

Let-

dow

n or

po

st a

dd0.

1-0.

4%

Isop

rop

yl

alco

hol,

acet

one;

di

sper

sib

le

in w

ater

Car

bin

olN

one

31-5

1

Sw

iss

Ord

inan

ce R

S

817.

023.

21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

50

0W

Addi

tive

Sili

cone

pol

yeth

er c

opol

ymer

Impa

rts

enha

nced

sub

stra

te w

ettin

g in

w

ater

born

e an

d ra

diat

ion

cura

ble

syst

ems;

su

itabl

e ac

ross

a w

ide

rang

e of

sub

stra

tes,

in

clud

ing

woo

d an

d pl

astic

s; s

tabl

e at

hig

h pH

Wat

erbo

rne

acry

lic

and

poly

uret

hane

; ra

diat

ion-

cura

ble

acry

late

Let-

dow

n0.

1-0.

4%

Isop

rop

yl

alco

hol,

acet

one

and

tolu

ene;

d

isp

ersi

ble

in

wat

er

Non

eN

one

25.5

-29.

5

DOW

SIL™

50

1W

Addi

tive

Sili

cone

pol

yeth

er c

opol

ymer

Impa

rts

enha

nced

sub

stra

te w

ettin

g in

w

ater

born

e an

d ra

diat

ion

cura

ble

syst

ems;

su

itabl

e ac

ross

a w

ide

rang

e of

sub

stra

tes,

in

clud

ing

woo

d an

d pl

astic

s

Wat

erbo

rne

acry

lic

and

poly

uret

hane

; ra

diat

ion-

cura

ble

acry

late

Let-

dow

n0.

1-0.

4%

Isop

rop

yl

alco

hol,

acet

one

and

tolu

ene;

d

isp

ersi

ble

in

wat

er

Non

eN

one

10-3

0

Sw

iss

Ord

inan

ce R

S

817.

023.

21

Ann

ex 1

0 P

art B

DOW

SIL™

50

2W

Addi

tive

Sili

cone

pol

yeth

er c

opol

ymer

Impa

rts

enha

nced

sub

stra

te w

ettin

g in

w

ater

born

e an

d ra

diat

ion

cura

ble

syst

ems;

su

itabl

e ac

ross

a w

ide

rang

e of

sub

stra

tes,

in

clud

ing

woo

d an

d pl

astic

s

Wat

erbo

rne

acry

lic

and

poly

uret

hane

; ra

diat

ion-

cura

ble

acry

late

Let-

dow

n0.

1-0.

4%

Isop

rop

yl

alco

hol,

acet

one

and

tolu

ene;

d

isp

ersi

ble

in

wat

er

Car

bin

olN

one

49-7

5

Sw

iss

Ord

inan

ce R

S

817.

023.

21

Ann

ex 1

0 P

art B

DOW

SIL™

50

3W

Addi

tive

Sili

cone

gly

col c

opol

ymer

Des

igne

d to

pro

vide

wet

ting,

pre

vent

pi

nhol

ing

and

impr

ove

film

sur

face

ap

pear

ance

in s

olve

ntbo

rne

and

wat

erbo

rne

inks

, pai

nts

and

coat

ings

app

licat

ions

; re

duce

d fo

am g

ener

atio

n

Acr

ylic

late

xes,

po

lyur

etha

ne

disp

ersi

ons

Let-

dow

n or

po

st a

dd0.

1-1%

Wat

er a

nd

alco

hols

Non

eN

one

1500

-200

0 cP

bfr

15-

0002

, b

fr 3

6-00

02

Text

urin

g (m

attin

g a

nd/o

r ta

ctile

eff

ects

)

DOW

SIL™

23

N

Addi

tive

Pow

der

cons

istin

g of

tr

ansp

aren

t sph

eric

al s

ilico

ne

elas

tom

er p

artic

les

with

ep

oxy

func

tiona

lity;

ave

rage

pa

rtic

le d

iam

eter

of 1

-3

mic

rons

Impa

rts

mar

and

abr

asio

n re

sist

ance

with

a

smoo

th, m

atte

fini

sh to

wat

erbo

rne

and

so

lven

tbor

ne c

oatin

gs

Wat

erbo

rne

and

so

lven

tbor

ne a

cryl

ic,

poly

uret

hane

Bes

t add

ed to

a

port

ion

of th

e re

sin/

solv

ent

syst

em u

nder

hi

gh s

hear

co

nditi

ons

prio

r to

ble

ndin

g in

to th

e fin

al

form

ulat

ion

0.5-

5.0%

Sol

vent

s su

ch

as g

lyco

ls, g

lyco

l et

hers

, alc

ohol

s,

wat

er w

ith

coso

lven

ts s

uch

as a

ceto

ne

Ep

oxy

Non

eN

A

Sw

iss

Ord

inan

ce R

S

817.

023.

21

Ann

ex 1

0 P

art

A o

r B

DOW

SIL™

33

Add

itive

Wat

erbo

rne

susp

ensi

on o

f sp

heric

al s

ilico

ne e

last

omer

pa

rtic

les

with

epo

xy

func

tiona

lity;

med

ian

part

icle

di

amet

er o

f 3-4

mic

rons

; 46

% a

ctiv

e

Impa

rts

a si

lky,

sm

ooth

, mat

te fi

nish

to

wat

erbo

rne

coat

ings

Wat

erbo

rne

acry

lic,

poly

uret

hane

P

ost a

dd2-

10%

Wat

erE

pox

yW

ater

<15

0

DOW

SIL™

61

Pai

nt

Addi

tive

10%

sili

cone

in s

olve

ntIm

part

s a

ham

mer

tone

fini

sh to

met

al

surf

aces

Prim

arily

so

lven

tbor

ne;

som

e w

ater

born

e

Fina

l thi

nnin

g st

age

or p

rior

to

let-

dow

n

0.05

-0.

5%

Aro

mat

ic

solv

ents

suc

h as

xy

lene

or

tolu

ene,

m

iner

al s

piri

ts, o

r ke

tone

s

Non

eE

thyl

ben

zene

, xy

lene

120


pg 10

Leveling

Mar resistance/ slip

Foam control

Hammertone

Pigment treatment

Gloss

Texturing

Wetting

Water resistance

Release

Additive selection tree for coatings applications

1 50% active in ethylene glycol isopropyl ether.Bold = Top product choices

Leveling

Mar resistance/slip

Foam control

Pigment treatment

Texturing

Wetting

Water resistance

Start

Waterbornesystem

SolventSystems

DOWSIL™ 27 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 62 AdditiveDOWSIL™ 71 AdditiveDOWSIL™ 74 AdditiveDOWSIL™ 163 AdditiveDOWSIL™ Z-6121 SilaneXIAMETER™ OFS-6011 SilaneXIAMETER™ OFS-6020 SilaneXIAMETER™ OFS-6030 SilaneXIAMETER™ OFS-6032 SilaneXIAMETER™ OFS-6040 Silane

FDA compliant

DOWSIL™ 18 AdditiveDOWSIL™ 23 N AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 67 AdditiveDOWSIL™ 100F AdditiveDOWSIL™ 102F AdditiveDOWSIL™ 163 AdditiveDOWSIL™ 205SL Additive1

DOWSIL™ 402LS AdditiveDOWSIL™ 500W AdditiveDOWSIL™ 501W AdditiveDOWSIL™ 502W AdditiveDOWSIL™ 8526 AdditiveDOWSIL™ 8621 AdditiveDOWSIL™ 8628 Additive

DOWSIL™ 14 AdditiveDOWSIL™ 18 AdditiveDOWSIL™ 27 AdditiveDOWSIL™ 51 AdditiveDOWSIL™ 52 AdditiveDOWSIL™ 54 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 205SL AdditiveDOWSIL™ 210S AdditiveDOWSIL™ 211S Additive

DOWSIL™ 108F AdditiveDOWSIL™ 62 AdditiveDOWSIL™ 68 AdditiveDOWSIL™ 71 AdditiveDOWSIL™ 74 AdditiveDOWSIL™ 107F AdditiveDOWSIL™ 8590 AdditiveDOWSIL™ 8603 AdditiveDOWSIL™ 8628 Additive

XIAMETER™ OFS-6011 SilaneXIAMETER™ OFS-6020 SilaneXIAMETER™ OFS-6040 Silane

DOWSIL™ 23 N AdditiveDOWSIL™ 33 Additive

DOWSIL™ 67 AdditiveDOWSIL™ 500W AdditiveDOWSIL™ 501W AdditiveDOWSIL™ 502W AdditiveDOWSIL™ 503W Additive

DOWSIL™ 84 AdditiveDOWSIL™ 87 AdditiveDOWSIL™ 88 AdditiveDOWSIL™ 901H AdditiveDOWSIL™ 902H AdditiveDOWSIL™ 906H Additive

DOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 402LS AdditiveDOWSIL™ 8526 Additive

DOWSIL™ 3 AdditiveDOWSIL™ 11 AdditiveDOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 56 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 8526 AdditiveDOWSIL™ 503W Additive

DOWSIL™ 11 AdditiveDOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 54 AdditiveDOWSIL™ 55 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 205SL Additive

DOWSIL™ 7 AdditiveDOWSIL™ 100F AdditiveDOWSIL™ 102F AdditiveDOWSIL™ 163 AdditiveDOWSIL™ 8621 Additive

DOWSIL™ 3 AdditiveDOWSIL™ 700P AdditiveXIAMETER™ OFS-6020 SilaneXIAMETER™ OFS-6030 SilaneXIAMETER™ OFS-6040 Silane

DOWSIL™ 61 Paint Additive

DOWSIL™ 57 Additive

DOWSIL™ 23 N Additive

DOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 503W Additive


DOWSIL™ 1-9770 Release AdditiveDOWSIL™ ST 114 Paint Additive

Solventless UV-cure/ EB-cure system

pg 11

Foam control additive selection tree for coatings applications

FDA compliantSolventless UV-cure/

EB-cure system

Solventborne

Waterborne

Solvent systems

Waterborne systems

< 60% PVC3 paints and inks

> 60% PVC3 paints

Emulsions

EmulsionsSelf-dispersiblecompounds

Industrial antifoam selection

150% active in ethylene glycol isopropyl ether.21% active in diisobutyl ketone.3Pigment volume concentration.

DOWSIL™ 108F AdditiveDOWSIL™ 62 AdditiveDOWSIL™ 68 Additive DOWSIL™ 106F Additive

DOWSIL™ 71 AdditiveDOWSIL™ 74 AdditiveDOWSIL™ 107F AdditiveDOWSIL™ 163 AdditiveDOWSIL™ 8590 AdditiveDOWSIL™ 8603 AdditiveDOWSIL™ 8610 AdditiveDOWSIL™ 8628 Additive

DOWSIL™ 7 Additive DOWSIL™ 100F AdditiveDOWSIL™ 102F AdditiveDOWSIL™ 163 AdditiveDOWSIL™ 8621 Additive

XIAMETER™ AFE-0700Antifoam Emulsion

DOWSIL™ 100F Additive1

DOWSIL™ 102F AdditiveDOWSIL™ 163 Additive2

DOWSIL™ 8621 AdditiveDOWSIL™ 8628 Additive


DOWSIL™ 62 AdditiveDOWSIL™ 71 AdditiveDOWSIL™ 74 AdditiveDOWSIL™ 163 Additive

DOWSIL™ 62 AdditiveDOWSIL™ 71 AdditiveDOWSIL™ 74 Additive





Recommended use level 0.1-0.5% 0.1-0.4% 0.05-0.2% 0.05-0.2%

Grind • •• ••• •••

Letdown ••• ••• •• •

Pigmented coatings Best performance

Clear coatings Best performance

• Good •• Better ••• Best

Start

pg 12

Mar-resistant/slip additive selection tree for coatings applications


DOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 402LS Additive

DOWSIL™ 57 AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 8526 Additive


DOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 402LS Additive

DOWSIL™ 18 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 205SL AdditiveDOWSIL™ 402LS Additive




To improve wetting, combine with

To improve wetting, combine with

Multipurpose; may also improve

wetting and levelingBest levelingAnd wetting

Best marResistance and slip


Anti-blocking

Anti-blocking

Easy to incorporate

Best wettingLow foam

Defoaming

Hand feel

Best leveling and wetting

Best leveling and wetting

FDA compliant

Multipurpose; may alsoImprove wetting and leveling

Recoatable

Waterborne


Solventless uv-cure/Eb-cure system

Solventborne

Hand feel with defoaming

Multipurpose;May also improve

Wetting and leveling

DOWSIL™ 205SL Additive

DOWSIL™ 11 AdditiveDOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 55 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 401LS Additive

DOWSIL™ 57 AdditiveDOWSIL™ 401LS Additive


DOWSIL™ 11 AdditiveDOWSIL™ 14 AdditiveDOWSIL™ 18 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 54 AdditiveDOWSIL™ 55 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 205SL AdditiveDOWSIL™ 401LS Additive




DOWSIL™ 18 AdditiveDOWSIL™ 27 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 8526 Additive



DOWSIL™ 51 AdditiveDOWSIL™ 52 AdditiveDOWSIL™ 402LS AdditiveDOWSIL™ 29 Additive


DOWSIL™ 52 AdditiveDOWSIL™ 210S AdditiveDOWSIL™ 211S Additive

DOWSIL™ 14 AdditiveDOWSIL™ 27 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 51 AdditiveDOWSIL™ 52 Additive

DOWSIL™ 55 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 205SL AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 402LS Additive

Start

pg 13

Leveling and wetting additive selection tree for coatings and ink applications

Recoatable

Best slip and wetting


FDA compliant

Leveling with no slip


Multipurpose;Also gives mar

Resistance and slip


Resistance and slip

Eliminates microfoam;Good thermal stability;Aids metallic pigment

Orientation

Solventborne

Solventless uv-cure/eb-cure system

Little or no increase in slip


Resistance and slip

Waterborne

Little or no impact on slip

Superior wetting on Low-energy substrates

If foaming is a problem, Combine with



DOWSIL™ 3 AdditiveDOWSIL™ 11 AdditiveDOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 55 AdditiveDOWSIL™ 56 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 8526 Additive

DOWSIL™ 11 AdditiveDOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 55 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 8526 Additive




DOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 401LS AdditiveDOWSIL™ 402LS AdditiveDOWSIL™ 8526 Additive


DOWSIL™ 14 AdditiveDOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 67 AdditiveDOWSIL™ 401LS Additive

DOWSIL™ 402LS AdditiveDOWSIL™ 500W AdditiveDOWSIL™ 501W AdditiveDOWSIL™ 502W AdditiveDOWSIL™ 8526 Additive



DOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 67 AdditiveDOWSIL™ 402LS Additive

DOWSIL™ 500W AdditiveDOWSIL™ 501W AdditiveDOWSIL™ 502W AdditiveDOWSIL™ 8526 Additive

DOWSIL™ 67 AdditiveDOWSIL™ 500W AdditiveDOWSIL™ 501W AdditiveDOWSIL™ 502W Additive

DOWSIL™ 29 AdditiveDOWSIL™ 57 AdditiveDOWSIL™ 402LS AdditiveDOWSIL™ 8526 Additive


DOWSIL™ 67 AdditiveDOWSIL™ 500W AdditiveDOWSIL™ 501W AdditiveDOWSIL™ 502W Additive

Start

pg 14












DOWSIL™ 210S Additive

DOWSIL™ 211S Additive

DOWSIL™ 7 Additive1





DOWSIL™ 100F Additive











DOWSIL™ 1-9770 Release Additive

WA

TE

RB

OR

NE

SOL

VE

NT

BO

RN

ER

AD

IAT

ION

CU

RE

LE

VE

LIN

G &

WE

TT

ING

FOA

M C

ON

TR

OL

WA

TE

R R

ESI

STA

NC

E

IND

UST

RIA

L (

OT

HE

R)

INK

S &

OP

VS

Mar

res

ista

nce

and

slip

So

lven

tbo

rne

Rad

iati

on

cure

Wat

erb

orn

e

Text

urin

g

(mat

ting

and/

or ta

ctile

effe

cts)

Rel

ease

Inks

and

op

vs

Foam

co

ntro

l

Ind

ustr

ial (

oth

er)

Ant

i-b

lock

ing

Arc

hite

ctur

al w

all

Leve

ling

and

wet

ting

Ind

ustr

ial w

oo

d a

nd t

rim

Systems Properties Markets

1Availability may be limited by region

Table 2. Additive selection tableUse this chart to identify the additives that meet your performance requirements.

pg 15

Table 2. Additive selection table (continued)

WA

TE

RB

OR

NE

SOL

VE

NT

BO

RN

ER

AD

IAT

ION

CU

RE

LE

VE

LIN

G &

WE

TT

ING

FOA

M C

ON

TR

OL

WA

TE

R R

ESI

STA

NC

E

Mar

res

ista

nce

and

slip

So

lven

tbo

rne

Rad

iati

on

cure

Wat

erb

orn

e

Text

urin

g

(mat

ting

and/

or ta

ctile

effe

cts)

Wat

er r

esis

tanc

e

Inks

and

op

vs

Foam

co

ntro

l

Ind

ustr

ial (

oth

er)

Pig

men

t tr

eatm

ent

Arc

hite

ctur

al w

all

Leve

ling

and

wet

ting

Ind

ustr

ial w

oo

d a

nd t

rim

Ant

i-b

lock

ing

Hid

ing

Systems Properties Markets


DOWSIL™ 700P Additive





DOWSIL™ 901H Additive






DOWSIL™ 401LS Additive

DOWSIL™ 402LS Additive


DOWSIL™ 23 N Additive



DOWSIL™ 500W Additive




Your global connectionAt home or abroad – wherever your business takes you – you will find the product supply, customer service and technical support you need to succeed available locally from Dow.

Whether you are facing a challenge that could benefit from Dow’s international business and market experience or you need a reliable, local source of supply for innovative paints, inks and coatings solutions, contact your Dow representative. Product samples, technical information and assistance also are available online at dow.com/coatings.

Images: Cover – dow_40237507594; Page 3 – adobe_258200496; Page 16 – dow_40238010678

PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE ON THE DOW WEBSITE AT WWW.DOW.COM, OR FROM YOUR DOW SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING DOW CUSTOMER SERVICE.

NOTICE: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document. References to “Dow” or the “Company” mean the Dow legal entity selling the products to Customer unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

®™ Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow

© 2021 The Dow Chemical Company. All rights reserved.

2000012083 Form No. 24-391-01-0821 S2D

mailto:http://www.dow.com/coatings?subject=

Documents

Coatings and inks additive - Dow